Skip to contentSkip to conversation

stress-ng: bump to version 0.09.47

PATCH New Carlos Santos 2 participants 2 messages Nov 25, 2018

lore
Share & tools
lore

Carlos Santos

author
#0 lore raw

PATCH 1/1 stress-ng: bump to version 0.09.47

- Enable for uClibc, which is supported now.
- Keep microblaze, nios2 and arc restrictions, since it was not possible to test on those architectures (no hardware available).
- Keep musl restriction, since it was possible to compile the code (with some patches) but it failed at run time with

Cannot set scheduler: errno=38 (Function not implemented)

Signed-off-by Carlos Santos <[email protected]>
---
 package/stress-ng/Config.in      | 7 +++----
 package/stress-ng/stress-ng.hash | 2 +-
 package/stress-ng/stress-ng.mk   | 2 +-
 3 files changed, 5 insertions(+), 6 deletions(-)
package/stress-ng/Config.in +3 -4
index 8816322149..fe92a7eb40 100644
@@ -2,8 +2,7 @@ config BR2_PACKAGE_STRESS_NG
 	bool "stress-ng"
 	depends on BR2_USE_MMU # fork()
 	# disabled on musl: stress-malloc.c needs mallopt() and M_MMAP_THRESHOLD
-	# disabled on uClibc: stress-aio.c needs aio.h
-	depends on BR2_TOOLCHAIN_USES_GLIBC
+	depends on !BR2_TOOLCHAIN_USES_MUSL
 	# perf.c needs PERF_COUNT_HW_REF_CPU_CYCLES
 	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_3
 	depends on !BR2_microblaze # keyutils

@@ -21,8 +20,8 @@ config BR2_PACKAGE_STRESS_NG
 
 	  http://kernel.ubuntu.com/~cking/stress-ng/
 
-comment "stress-ng needs a glibc toolchain w/ dynamic library, headers >= 3.3"
+comment "stress-ng needs a glibc or uClibc toolchain w/ dynamic library, headers >= 3.3"
 	depends on !BR2_microblaze && !BR2_nios2 && !BR2_arc
 	depends on BR2_USE_MMU
 	depends on BR2_STATIC_LIBS || !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_3 \
-		|| !BR2_TOOLCHAIN_USES_GLIBC
+		|| BR2_TOOLCHAIN_USES_MUSL
package/stress-ng/stress-ng.hash +1 -1
index e0185fad15..c7c6ec0fe8 100644
@@ -1,3 +1,3 @@
 # Locally calculated
-sha256 485f6e7384614fd96955bea4d1f79cd75f8be7e8da30cb3a7e8724ff7b75cd9c stress-ng-0.09.39.tar.xz
+sha256 ed888f5192297855f3ce39b4591b1decc9c580c9753f2cc9c86449f50d23aeb0 stress-ng-0.09.47.tar.xz
 sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING
package/stress-ng/stress-ng.mk +1 -1
index 26e100f454..187d276b24 100644
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-STRESS_NG_VERSION = 0.09.39
+STRESS_NG_VERSION = 0.09.47
 STRESS_NG_SOURCE = stress-ng-$(STRESS_NG_VERSION).tar.xz
 STRESS_NG_SITE = http://kernel.ubuntu.com/~cking/tarballs/stress-ng
 STRESS_NG_LICENSE = GPL-2.0+
Signature · 1 line
2.19.1
Applied
#1 lore raw

PATCH 1/1 stress-ng: bump to version 0.09.47

Hello,

Quoted 6 lines · Carlos Santos

- Enable for uClibc, which is supported now.
- Keep microblaze, nios2 and arc restrictions, since it was not possible to test on those architectures (no hardware available).
- Keep musl restriction, since it was possible to compile the code (with some patches) but it failed at run time with

Quoted 8 lines

Cannot set scheduler: errno=38 (Function not implemented)

Signed-off-by Carlos Santos <[email protected]>
---
 package/stress-ng/Config.in      | 7 +++----
 package/stress-ng/stress-ng.hash | 2 +-
 package/stress-ng/stress-ng.mk   | 2 +-
 3 files changed, 5 insertions(+), 6 deletions(-)

Applied to next, thanks.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com