Skip to contentSkip to conversation

mfd: cros_ec: Add commands to control codec

PATCH Applied Cheng-Yi Chiang 3 participants 13 messages Nov 27, 2018 – Dec 24, 2018

Subsystems (6)

v1 of 3 Applied Latest is v3 →

lore
Share & tools
lore

Cheng-Yi Chiang

author maintainer
#0 lore raw

PATCH 1/3 mfd: cros_ec: Add commands to control codec

Add EC host commands to control codec on EC.

---
 include/linux/mfd/cros_ec_commands.h | 94 ++++++++++++++++++++++++++++
 1 file changed, 94 insertions(+)
include/linux/mfd/cros_ec_commands.h +94 -0
index 07fe4ea0361d3..a3ac792f4915b 100644
@@ -4077,6 +4077,100 @@ struct __ec_align1 ec_response_i2c_passthru_protect {
 	uint8_t status;		/* Status flags (0: unlocked, 1: locked) */
 };
 
+/*****************************************************************************/
+/* Commands for I2S recording on audio codec. */
+
+#define EC_CMD_CODEC_I2S 0x00BC
+
+enum ec_codec_i2s_subcmd {
+	EC_CODEC_SET_SAMPLE_DEPTH = 0x0,
+	EC_CODEC_SET_GAIN = 0x1,
+	EC_CODEC_GET_GAIN = 0x2,
+	EC_CODEC_I2S_ENABLE = 0x3,
+	EC_CODEC_I2S_SET_CONFIG = 0x4,
+	EC_CODEC_I2S_SET_TDM_CONFIG = 0x5,
+	EC_CODEC_I2S_SET_BCLK = 0x6,
+};
+
+enum ec_sample_depth_value {
+	EC_CODEC_SAMPLE_DEPTH_16 = 0,
+	EC_CODEC_SAMPLE_DEPTH_24 = 1,
+};
+
+enum ec_i2s_config {
+	EC_DAI_FMT_I2S = 0,
+	EC_DAI_FMT_RIGHT_J = 1,
+	EC_DAI_FMT_LEFT_J = 2,
+	EC_DAI_FMT_PCM_A = 3,
+	EC_DAI_FMT_PCM_B = 4,
+	EC_DAI_FMT_PCM_TDM = 5,
+};
+
+struct ec_param_codec_i2s {
+	/*
+	 * enum ec_codec_i2s_subcmd
+	 */
+	uint8_t cmd;
+	union {
+		/*
+		 * EC_CODEC_SET_SAMPLE_DEPTH
+		 * Value should be one of ec_sample_depth_value.
+		 */
+		uint8_t depth;
+
+		/*
+		 * EC_CODEC_SET_GAIN
+		 * Value should be 0~43 for both channels.
+		 */
+		struct ec_param_codec_i2s_set_gain {
+			uint8_t left;
+			uint8_t right;
+		} __packed gain;
+
+		/*
+		 * EC_CODEC_I2S_ENABLE
+		 * 1 to enable, 0 to disable.
+		 */
+		uint8_t i2s_enable;
+
+		/*
+		 * EC_CODEC_I2S_SET_COFNIG
+		 * Value should be one of ec_i2s_config.
+		 */
+		uint8_t i2s_config;
+
+		/*
+		 * EC_CODEC_I2S_SET_TDM_CONFIG
+		 * Value should be one of ec_i2s_config.
+		 */
+		struct ec_param_codec_i2s_tdm {
+			/*
+			 * 0 to 496
+			 */
+			int16_t ch0_delay;
+			/*
+			 * -1 to 496
+			 */
+			int16_t ch1_delay;
+			uint8_t adjacent_to_ch0;
+			uint8_t adjacent_to_ch1;
+		} __packed tdm_param;
+
+		/*
+		 * EC_CODEC_I2S_SET_BCLK
+		 */
+		uint32_t bclk;
+	};
+} __packed;
+
+/*
+ * For subcommand EC_CODEC_GET_GAIN.
+ */
+struct ec_response_codec_gain {
+	uint8_t left;
+	uint8_t right;
+} __packed;
+
 /*****************************************************************************/
 /* System commands */
 
Signature · 1 line
2.20.0.rc0.387.gc7a69e6b6c-goog
author maintainer
#1 lore raw

PATCH 2/3 ASoC: Documentation: Add google,cros-ec-codec

Add documentation for Chrome EC codec driver.

---
 .../bindings/sound/google,cros-ec-codec.txt   | 24 +++++++++++++++++++
 MAINTAINERS                                   |  5 ++++
 2 files changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt
Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt new file +24 -0
new file mode 100644
index 0000000000000..57718382b3a36
@@ -0,0 +1,24 @@
+* Audio codec controlled by ChromeOS EC
+
+Google's ChromeOS EC codec is a digital mic codec provided by the
+Embedded Controller (EC) and is controlled via a host-command interface.
+
+An EC codec node should only be found as a sub-node of the EC node (see
+Documentation/devicetree/bindings/mfd/cros-ec.txt).
+
+Required properties:
+- compatible: Must contain "google,cros-ec-codec"
+- #sound-dai-cells: Should be 1. The cell specifies number of DAIs.
+
+Example:
+
+cros-ec@0 {
+	compatible = "google,cros-ec-spi";
+
+	...
+
+	cros_ec_codec: ec-codec {
+		compatible = "google,cros-ec-codec";
+		#sound-dai-cells = <1>;
+	};
+};
MAINTAINERS +5 -0
index 91b4218195aac..5cf8ab296cc61 100644
@@ -3552,6 +3552,11 @@ S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform.git
 F:	drivers/platform/chrome/
 
+CHROME EC CODEC DRIVER
+M:	Cheng-Yi Chiang <[email protected]>
+S:	Maintained
+F:	Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt
+
 CIRRUS LOGIC AUDIO CODEC DRIVERS
 M:	Brian Austin <[email protected]>
 M:	Paul Handrigan <[email protected]>
Signature · 1 line
2.20.0.rc0.387.gc7a69e6b6c-goog
author maintainer
#2 lore raw

PATCH 3/3 ASoC: cros_ec_codec: Add codec driver for Cros EC

In reply to Cheng-Yi Chiang

Add a codec driver to control ChromeOS EC codec.

Use EC Host command to enable/disable I2S recording and control other configurations.

---
 MAINTAINERS                      |   1 +
 sound/soc/codecs/Kconfig         |   8 +
 sound/soc/codecs/Makefile        |   2 +
 sound/soc/codecs/cros_ec_codec.c | 499 +++++++++++++++++++++++++++++++
 sound/soc/codecs/cros_ec_codec.h |  33 ++
 5 files changed, 543 insertions(+)
 create mode 100644 sound/soc/codecs/cros_ec_codec.c
 create mode 100644 sound/soc/codecs/cros_ec_codec.h
MAINTAINERS +1 -0
index 5cf8ab296cc61..f1999ef19d1cc 100644
@@ -3556,6 +3556,7 @@ CHROME EC CODEC DRIVER
 M:	Cheng-Yi Chiang <[email protected]>
 S:	Maintained
 F:	Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt
+F:	sound/soc/codecs/cros_ec_codec.*
 
 CIRRUS LOGIC AUDIO CODEC DRIVERS
 M:	Brian Austin <[email protected]>
sound/soc/codecs/Kconfig +8 -0
index efb095dbcd714..3e3e9294c0259 100644
@@ -49,6 +49,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_BT_SCO
 	select SND_SOC_BD28623
 	select SND_SOC_CQ0093VC
+	select SND_SOC_CROS_EC_CODEC
 	select SND_SOC_CS35L32 if I2C
 	select SND_SOC_CS35L33 if I2C
 	select SND_SOC_CS35L34 if I2C
@@ -445,6 +446,13 @@ config SND_SOC_CPCAP
 config SND_SOC_CQ0093VC
 	tristate
 
+config SND_SOC_CROS_EC_CODEC
+	tristate "codec driver for Cros EC"
+	depends on MFD_CROS_EC
+	help
+	  If you say yes here you will get support for the
+	  Chrome OS Embedded Controller's Audio Codec.
+
 config SND_SOC_CS35L32
 	tristate "Cirrus Logic CS35L32 CODEC"
 	depends on I2C
sound/soc/codecs/Makefile +2 -0
index 7ae7c85e8219f..ff05c260c5776 100644
@@ -41,6 +41,7 @@ snd-soc-bd28623-objs := bd28623.o
 snd-soc-bt-sco-objs := bt-sco.o
 snd-soc-cpcap-objs := cpcap.o
 snd-soc-cq93vc-objs := cq93vc.o
+snd-soc-cros-ec-codec-objs := cros_ec_codec.o
 snd-soc-cs35l32-objs := cs35l32.o
 snd-soc-cs35l33-objs := cs35l33.o
 snd-soc-cs35l34-objs := cs35l34.o
@@ -301,6 +302,7 @@ obj-$(CONFIG_SND_SOC_BD28623)	+= snd-soc-bd28623.o
 obj-$(CONFIG_SND_SOC_BT_SCO)	+= snd-soc-bt-sco.o
 obj-$(CONFIG_SND_SOC_CQ0093VC) += snd-soc-cq93vc.o
 obj-$(CONFIG_SND_SOC_CPCAP)	+= snd-soc-cpcap.o
+obj-$(CONFIG_SND_SOC_CROS_EC_CODEC)	+= snd-soc-cros-ec-codec.o
 obj-$(CONFIG_SND_SOC_CS35L32)	+= snd-soc-cs35l32.o
 obj-$(CONFIG_SND_SOC_CS35L33)	+= snd-soc-cs35l33.o
 obj-$(CONFIG_SND_SOC_CS35L34)	+= snd-soc-cs35l34.o
sound/soc/codecs/cros_ec_codec.c new file +499 -0

499 lines not on this page · raw message

sound/soc/codecs/cros_ec_codec.h new file +33 -0
new file mode 100644
index 0000000000000..3a72e16a7ba65
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * ChromeOS EC Codec
+ *
+ * Copyright 2018 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CROS_EC_CODEC_H
+#define __CROS_EC_CODEC_H
+
+/*
+ * struct cros_ec_codec_data - ChromeOS EC codec driver data.
+ *
+ * @dev: Device structure used in sysfs.
+ * @ec_device: cros_ec_device structure to talk to the physical device.
+ * @component: Pointer to the component.
+ */
+struct cros_ec_codec_data {
+	struct device *dev;
+	struct cros_ec_device *ec_device;
+	struct snd_soc_component *component;
+};
+
+#endif  /* __CROS_EC_CODEC_H */
Signature · 1 line
2.20.0.rc0.387.gc7a69e6b6c-goog
#3 lore raw

Re: [alsa-devel] [PATCH 3/3] ASoC: cros_ec_codec: Add codec driver for Cros EC

Hi Cheng-Yi

Many thanks for the patch. I am not really an ASoC expert, so my comments are more based on the feedback for other cros-ec drivers. So, various nits and few comments below.

The first question I'd like to ask is if there is any EC_FEATURE that tells you that the cros-ec has the codec. And second (if you can answer), could you tell me which device you used to test this?

Missatge de Cheng-Yi Chiang <[email protected]> del dia dt., 27 de nov. 2018 a les 13:02:

MAINTAINERS CHROME EC CODEC DRIVER

Quoted 22 lines

Add a codec driver to control ChromeOS EC codec.

Use EC Host command to enable/disable I2S recording and control other configurations.

---
 MAINTAINERS                      |   1 +
 sound/soc/codecs/Kconfig         |   8 +
 sound/soc/codecs/Makefile        |   2 +
 sound/soc/codecs/cros_ec_codec.c | 499 +++++++++++++++++++++++++++++++
 sound/soc/codecs/cros_ec_codec.h |  33 ++
 5 files changed, 543 insertions(+)
 create mode 100644 sound/soc/codecs/cros_ec_codec.c
 create mode 100644 sound/soc/codecs/cros_ec_codec.h
MAINTAINERS +0 -0
index 5cf8ab296cc61..f1999ef19d1cc 100644
@@ -3556,6 +3556,7 @@ CHROME EC CODEC DRIVER

Trying to be coherent with names s/CHROME/CHROMEOS/

MAINTAINERS CHROME EC CODEC DRIVER · line 3556

Quoted 1 line
MAINTAINERS +0 -0
 M:     Cheng-Yi Chiang <[email protected]>

Do you mind adding me as a reviewer? I am interested in review all the cros-ec related patches.

R: Enric Balletbo i Serra <[email protected]>

Quoted 19 lines
MAINTAINERS +1 -0
 S:     Maintained
 F:     Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt
+F:     sound/soc/codecs/cros_ec_codec.*
 
 CIRRUS LOGIC AUDIO CODEC DRIVERS
 M:     Brian Austin <[email protected]>
sound/soc/codecs/Kconfig +1 -0
index efb095dbcd714..3e3e9294c0259 100644
@@ -49,6 +49,7 @@ config SND_SOC_ALL_CODECS
        select SND_SOC_BT_SCO
        select SND_SOC_BD28623
        select SND_SOC_CQ0093VC
+       select SND_SOC_CROS_EC_CODEC
        select SND_SOC_CS35L32 if I2C
        select SND_SOC_CS35L33 if I2C
        select SND_SOC_CS35L34 if I2C

sound/soc/codecs/Kconfig config SND_SOC_CPCAP · line 450

Quoted 5 lines
sound/soc/codecs/Kconfig +2 -0
@@ -445,6 +446,13 @@ config SND_SOC_CPCAP
 config SND_SOC_CQ0093VC
        tristate
 
+config SND_SOC_CROS_EC_CODEC
+       tristate "codec driver for Cros EC"

s/Cros EC/ChromeOS EC

sound/soc/codecs/Kconfig config SND_SOC_CPCAP · line 454

Quoted 4 lines
sound/soc/codecs/Kconfig +4 -0
+       depends on MFD_CROS_EC
+       help
+         If you say yes here you will get support for the
+         Chrome OS Embedded Controller's Audio Codec.

nit: s/Chrome OS/ChromeOS/

Based on past discussions It's not really clear if you should use Chrome OS or ChromeOS. Personally, I like the second version which is more used but I don't mind which one you use, but don't mix Chrome OS and ChromeOS, use the same form for in your patch. I'll point you where you used "Chrome OS" in this review.

Quoted 30 lines
sound/soc/codecs/Kconfig +1 -0
+
 config SND_SOC_CS35L32
        tristate "Cirrus Logic CS35L32 CODEC"
        depends on I2C
sound/soc/codecs/Makefile +2 -0
index 7ae7c85e8219f..ff05c260c5776 100644
@@ -41,6 +41,7 @@ snd-soc-bd28623-objs := bd28623.o
 snd-soc-bt-sco-objs := bt-sco.o
 snd-soc-cpcap-objs := cpcap.o
 snd-soc-cq93vc-objs := cq93vc.o
+snd-soc-cros-ec-codec-objs := cros_ec_codec.o
 snd-soc-cs35l32-objs := cs35l32.o
 snd-soc-cs35l33-objs := cs35l33.o
 snd-soc-cs35l34-objs := cs35l34.o
@@ -301,6 +302,7 @@ obj-$(CONFIG_SND_SOC_BD28623)       += snd-soc-bd28623.o
 obj-$(CONFIG_SND_SOC_BT_SCO)   += snd-soc-bt-sco.o
 obj-$(CONFIG_SND_SOC_CQ0093VC) += snd-soc-cq93vc.o
 obj-$(CONFIG_SND_SOC_CPCAP)    += snd-soc-cpcap.o
+obj-$(CONFIG_SND_SOC_CROS_EC_CODEC)    += snd-soc-cros-ec-codec.o
 obj-$(CONFIG_SND_SOC_CS35L32)  += snd-soc-cs35l32.o
 obj-$(CONFIG_SND_SOC_CS35L33)  += snd-soc-cs35l33.o
 obj-$(CONFIG_SND_SOC_CS35L34)  += snd-soc-cs35l34.o
sound/soc/codecs/cros_ec_codec.c new file +0 -0
new file mode 100644
index 0000000000000..e24174c11a7de

sound/soc/codecs/cros_ec_codec.c line 3

Quoted 3 lines
sound/soc/codecs/cros_ec_codec.c new file +3 -0
@@ -0,0 +1,499 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * cros_ec_codec - Driver for Chrome OS Embedded Controller codec.

nit: remove "cros_ec_code -" just put the description here. If for some weird reason the file changes the name this will be probably incorrect and doesn't apport anything.
nit: s/Chrome OS/ChromeOS/

sound/soc/codecs/cros_ec_codec.c line 15

Quoted 12 lines
sound/soc/codecs/cros_ec_codec.c new file +12 -0
+ *
+ * Copyright 2018 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *

You can remove LICENSE boilerplate, is inherent to the SPDX-License-Identifier.

sound/soc/codecs/cros_ec_codec.c line 16

Quoted 1 line
sound/soc/codecs/cros_ec_codec.c new file +1 -0
+ * This driver uses the cros-ec interface to communicate with the Chrome OS

nit: s/Chrome OS/ChromeOS/

Quoted 4 lines
sound/soc/codecs/cros_ec_codec.c new file +4 -0
+ * EC for audio function.
+ */
+
+#include <linux/delay.h>

sound/soc/codecs/cros_ec_codec.c line 30

Quoted 10 lines
sound/soc/codecs/cros_ec_codec.c new file +10 -0
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/module.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+#include <linux/platform_device.h>

nit: I like see alphabetical order here

Quoted 4 lines
sound/soc/codecs/cros_ec_codec.c new file +4 -0
+
+#include "cros_ec_codec.h"
+
+#define MAX_GAIN 43

sound/soc/codecs/cros_ec_codec.c line 44

Quoted 10 lines
sound/soc/codecs/cros_ec_codec.c new file +10 -0
+
+#define DRV_NAME "cros-ec-codec"
+
+static const DECLARE_TLV_DB_SCALE(ec_mic_gain_tlv, 0, 100, 0);
+/*
+ * Wrapper for EC command.
+ */
+static int ec_command(struct snd_soc_component *component, int version,
+                     int command, uint8_t *outdata, int outsize,
+                     uint8_t *indata, int insize)

nit: s/uint8_t/u8/ checkpatch --strict ? Will spot more format issues in this patch. I'm going to add some of these to this review as a nit.

sound/soc/codecs/cros_ec_codec.c line 46

Quoted 2 lines
sound/soc/codecs/cros_ec_codec.c new file +2 -0
+{
+       struct cros_ec_codec_data *codec_data = snd_soc_component_get_drvdata(

nit: Lines should not end with a '('

Quoted 17 lines
sound/soc/codecs/cros_ec_codec.c new file +17 -0
+                       component);
+       struct cros_ec_device *ec_device = codec_data->ec_device;
+       struct cros_ec_command *msg;
+       int ret;
+
+       msg = kzalloc(sizeof(*msg) + max(insize, outsize), GFP_KERNEL);
+       if (!msg)
+               return -ENOMEM;
+
+       msg->version = version;
+       msg->command = command;
+       msg->outsize = outsize;
+       msg->insize = insize;
+
+       if (outsize)
+               memcpy(msg->data, outdata, outsize);
+

sound/soc/codecs/cros_ec_codec.c line 73

Quoted 10 lines
sound/soc/codecs/cros_ec_codec.c new file +10 -0
+       ret = cros_ec_cmd_xfer_status(ec_device, msg);
+       if (ret > 0 && insize)
+               memcpy(indata, msg->data, insize);
+
+       kfree(msg);
+       return ret;
+}
+
+static int set_i2s_config(struct snd_soc_component *component,
+                         enum ec_i2s_config i2s_config)

nit: Alignment should match open parenthesis

sound/soc/codecs/cros_ec_codec.c line 85

Quoted 12 lines
sound/soc/codecs/cros_ec_codec.c new file +12 -0
+{
+       struct ec_param_codec_i2s param;
+       int ret;
+
+       dev_dbg(component->dev, "%s set I2S format to %u\n", __func__,
+               i2s_config);
+
+       param.cmd = EC_CODEC_I2S_SET_CONFIG;
+       param.i2s_config = i2s_config;
+
+       ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
+                        (uint8_t *)&param, sizeof(param),

nit: Prefer kernel type 'u8' over 'uint8_t'

Quoted 6 lines
sound/soc/codecs/cros_ec_codec.c new file +6 -0
+                        NULL, 0);
+       if (ret < 0) {
+               dev_err(component->dev,
+                       "set I2S format to %u command returned 0x%x\n",
+                       i2s_config, ret);
+               return -EINVAL;

sound/soc/codecs/cros_ec_codec.c line 101

Quoted 10 lines
sound/soc/codecs/cros_ec_codec.c new file +10 -0
+       }
+       return 0;
+}
+
+static int cros_ec_i2s_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+       struct snd_soc_component *component = dai->component;
+       enum ec_i2s_config i2s_config;
+
+       dev_dbg(component->dev, "%s enter\n", __func__);

Entry and exit debugging log are not really useful, and you can use kernel trace tools to check that, so better remove it.

Quoted 33 lines
sound/soc/codecs/cros_ec_codec.c new file +33 -0
+
+       switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+       case SND_SOC_DAIFMT_CBS_CFS:
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+       case SND_SOC_DAIFMT_NB_NF:
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+       case SND_SOC_DAIFMT_I2S:
+               i2s_config = EC_DAI_FMT_I2S;
+               break;
+
+       case SND_SOC_DAIFMT_RIGHT_J:
+               i2s_config = EC_DAI_FMT_RIGHT_J;
+               break;
+
+       case SND_SOC_DAIFMT_LEFT_J:
+               i2s_config = EC_DAI_FMT_LEFT_J;
+               break;
+
+       case SND_SOC_DAIFMT_DSP_A:
+               i2s_config = EC_DAI_FMT_PCM_A;
+               break;
+
+       case SND_SOC_DAIFMT_DSP_B:

sound/soc/codecs/cros_ec_codec.c line 144

Quoted 10 lines
sound/soc/codecs/cros_ec_codec.c new file +10 -0
+               i2s_config = EC_DAI_FMT_PCM_B;
+               break;
+
+       default:
+               return -EINVAL;
+       }
+
+       set_i2s_config(component, i2s_config);
+
+       dev_dbg(component->dev, "%s set I2S DAI format\n", __func__);

Remove this debug message it is only used to trace the exit of the function.

Quoted 107 lines
sound/soc/codecs/cros_ec_codec.c new file +107 -0
+
+       return 0;
+}
+
+static int set_i2s_sample_depth(struct snd_soc_component *component,
+                               enum ec_sample_depth_value depth)
+{
+       struct ec_param_codec_i2s param;
+       int ret;
+
+       dev_dbg(component->dev, "%s set depth to %u\n", __func__, depth);
+
+       param.cmd = EC_CODEC_SET_SAMPLE_DEPTH;
+       param.depth = depth;
+
+       ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
+                        (uint8_t *)&param, sizeof(param),
+                        NULL, 0);
+       if (ret < 0) {
+               dev_err(component->dev, "I2S sample depth %u returned 0x%x\n",
+                       depth, ret);
+               return -EINVAL;
+       }
+       return 0;
+}
+
+static int set_bclk(struct snd_soc_component *component, uint32_t bclk)
+{
+       struct ec_param_codec_i2s param;
+       int ret;
+
+       dev_dbg(component->dev, "%s set i2s bclk to %u\n", __func__, bclk);
+
+       param.cmd = EC_CODEC_I2S_SET_BCLK;
+       param.bclk = bclk;
+
+       ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
+                        (uint8_t *)&param, sizeof(param),
+                        NULL, 0);
+       if (ret < 0) {
+               dev_err(component->dev, "I2S set bclk %u command returned 0x%x\n",
+                       bclk, ret);
+               return -EINVAL;
+       }
+       return 0;
+}
+
+static int cros_ec_i2s_hw_params(struct snd_pcm_substream *substream,
+       struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+       struct snd_soc_component *component = dai->component;
+       int frame_size;
+       unsigned int rate, bclk;
+       int ret;
+
+       frame_size = snd_soc_params_to_frame_size(params);
+       if (frame_size < 0) {
+               dev_err(component->dev, "Unsupported frame size: %d\n",
+                       frame_size);
+               return -EINVAL;
+       }
+
+       rate = params_rate(params);
+       if (rate != 48000) {
+               dev_err(component->dev, "Unsupported rate\n");
+               return -EINVAL;
+       }
+
+       switch (params_format(params)) {
+       case SNDRV_PCM_FORMAT_S16_LE:
+               ret = set_i2s_sample_depth(component, EC_CODEC_SAMPLE_DEPTH_16);
+               break;
+       case SNDRV_PCM_FORMAT_S24_LE:
+               ret = set_i2s_sample_depth(component, EC_CODEC_SAMPLE_DEPTH_24);
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       if (ret)
+               return ret;
+
+       bclk = snd_soc_params_to_bclk(params);
+       ret = set_bclk(component, bclk);
+
+       return ret;
+}
+
+static const struct snd_soc_dai_ops cros_ec_i2s_dai_ops = {
+       .hw_params = cros_ec_i2s_hw_params,
+       .set_fmt = cros_ec_i2s_set_dai_fmt,
+};
+
+struct snd_soc_dai_driver cros_ec_dai[] = {
+       {
+               .name = "cros_ec_codec I2S",
+               .id = 0,
+               .capture = {
+                       .stream_name = "I2S Capture",
+                       .channels_min = 2,
+                       .channels_max = 2,
+                       .rates = SNDRV_PCM_RATE_48000,
+                       .formats = SNDRV_PCM_FMTBIT_S16_LE |
+                                  SNDRV_PCM_FMTBIT_S24_LE,
+               },
+               .ops = &cros_ec_i2s_dai_ops,
+       }

sound/soc/codecs/cros_ec_codec.c line 261

Quoted 10 lines
sound/soc/codecs/cros_ec_codec.c new file +10 -0
+};
+
+static int get_ec_mic_gain(struct snd_soc_component *component,
+                          uint8_t *left, uint8_t *right)
+{
+       struct ec_param_codec_i2s param;
+       struct ec_response_codec_gain resp;
+       int ret;
+
+       dev_dbg(component->dev, "%s get mic gain\n", __func__);

Remove the trace.

Quoted 48 lines
sound/soc/codecs/cros_ec_codec.c new file +48 -0
+
+       param.cmd = EC_CODEC_GET_GAIN;
+
+       ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
+                        (uint8_t *)&param, sizeof(param),
+                        (uint8_t *)&resp, sizeof(resp));
+       if (ret < 0) {
+               dev_err(component->dev, "I2S get gain command returned 0x%x\n",
+                       ret);
+               return -EINVAL;
+       }
+
+       *left = resp.left;
+       *right = resp.right;
+
+       dev_dbg(component->dev, "%s get mic gain %u, %u\n", __func__,
+               *left, *right);
+
+       return 0;
+}
+
+static int mic_gain_get(struct snd_kcontrol *kcontrol,
+                       struct snd_ctl_elem_value *ucontrol)
+{
+       struct snd_soc_component *component = snd_soc_kcontrol_component(
+                       kcontrol);
+       uint8_t left, right;
+       int ret;
+
+       ret = get_ec_mic_gain(component, &left, &right);
+
+       if (ret)
+               return ret;
+
+       ucontrol->value.integer.value[0] = left;
+       ucontrol->value.integer.value[1] = right;
+
+       return 0;
+}
+
+static int set_ec_mic_gain(struct snd_soc_component *component,
+                          uint8_t left, uint8_t right)
+{
+       struct ec_param_codec_i2s param;
+       int ret;
+
+       dev_dbg(component->dev, "%s set mic gain to %u, %u\n",
+               __func__, left, right);

sound/soc/codecs/cros_ec_codec.c line 319

Quoted 10 lines
sound/soc/codecs/cros_ec_codec.c new file +10 -0
+
+       param.cmd = EC_CODEC_SET_GAIN;
+       param.gain.left = left;
+       param.gain.right = right;
+
+       ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
+                        (uint8_t *)&param, sizeof(param),
+                        NULL, 0);
+       if (ret < 0) {
+               dev_err(component->dev, "I2S set gain command returned 0x%x\n",

%d ? Doesn't make more sense print the decimal format here? I know that other cros_ec drivers do this, is something to fix I guess.

Quoted 90 lines
sound/soc/codecs/cros_ec_codec.c new file +90 -0
+                       ret);
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
+static int mic_gain_put(struct snd_kcontrol *kcontrol,
+                       struct snd_ctl_elem_value *ucontrol)
+{
+       struct snd_soc_component *component = snd_soc_kcontrol_component(
+                       kcontrol);
+       int left = ucontrol->value.integer.value[0];
+       int right = ucontrol->value.integer.value[1];
+       int ret;
+
+       if (left > MAX_GAIN || right > MAX_GAIN)
+               return -EINVAL;
+
+       ret = set_ec_mic_gain(component, (uint8_t)left, (uint8_t)right);
+
+       if (ret)
+               return ret;
+
+       return 0;
+}
+
+static const struct snd_kcontrol_new cros_ec_snd_controls[] = {
+       SOC_DOUBLE_EXT_TLV("EC Mic Gain", SND_SOC_NOPM, SND_SOC_NOPM, 0, 43, 0,
+                          mic_gain_get, mic_gain_put, ec_mic_gain_tlv)
+};
+
+static int enable_i2s(struct snd_soc_component *component, int enable)
+{
+       struct ec_param_codec_i2s param;
+       int ret;
+
+       dev_dbg(component->dev, "%s set i2s to %u\n", __func__, enable);
+
+       param.cmd = EC_CODEC_I2S_ENABLE;
+       param.i2s_enable = enable;
+
+       ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
+                        (uint8_t *)&param, sizeof(param),
+                        NULL, 0);
+       if (ret < 0) {
+               dev_err(component->dev, "I2S enable %d command returned 0x%x\n",
+                        enable, ret);
+               return -EINVAL;
+       }
+       return 0;
+}
+
+static int cros_ec_i2s_enable_event(struct snd_soc_dapm_widget *w,
+                            struct snd_kcontrol *kcontrol, int event)
+{
+       struct snd_soc_component *component = snd_soc_dapm_to_component(
+                       w->dapm);
+
+       dev_dbg(component->dev, "%s enter\n", __func__);
+
+       switch (event) {
+
+       case SND_SOC_DAPM_PRE_PMU:
+               dev_dbg(component->dev,
+                       "%s got SND_SOC_DAPM_PRE_PMU event\n", __func__);
+               return enable_i2s(component, 1);
+
+       case SND_SOC_DAPM_PRE_PMD:
+               dev_dbg(component->dev,
+                       "%s got SND_SOC_DAPM_PRE_PMD event\n", __func__);
+               return enable_i2s(component, 0);
+       }
+
+       return 0;
+}
+
+/*
+ * The goal of this DAPM route is to turn on/off I2S using EC
+ * host command when capture stream is started/stopped.
+ */
+static const struct snd_soc_dapm_widget cros_ec_dapm_widgets[] = {
+       SND_SOC_DAPM_INPUT("DMIC"),
+
+       /*
+        * Control EC to enable/disable I2S.
+        */
+       SND_SOC_DAPM_SUPPLY("I2S Enable", SND_SOC_NOPM,
+                           0, 0, cros_ec_i2s_enable_event,
+                           SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),

sound/soc/codecs/cros_ec_codec.c line 419

Quoted 10 lines
sound/soc/codecs/cros_ec_codec.c new file +10 -0
+
+       SND_SOC_DAPM_AIF_OUT("I2STX", "I2S Capture", 0, SND_SOC_NOPM, 0, 0),
+};
+
+static const struct snd_soc_dapm_route cros_ec_dapm_routes[] = {
+       { "I2STX", NULL, "DMIC" },
+       { "I2STX", NULL, "I2S Enable" },
+};
+
+

nit: Please don't use multiple blank lines.

Quoted 10 lines
sound/soc/codecs/cros_ec_codec.c new file +10 -0
+static const struct snd_soc_component_driver cros_ec_component_driver = {
+       .controls               = cros_ec_snd_controls,
+       .num_controls           = ARRAY_SIZE(cros_ec_snd_controls),
+       .dapm_widgets           = cros_ec_dapm_widgets,
+       .num_dapm_widgets       = ARRAY_SIZE(cros_ec_dapm_widgets),
+       .dapm_routes            = cros_ec_dapm_routes,
+       .num_dapm_routes        = ARRAY_SIZE(cros_ec_dapm_routes),
+};
+
+/*

sound/soc/codecs/cros_ec_codec.c line 439

Quoted 10 lines
sound/soc/codecs/cros_ec_codec.c new file +10 -0
+ * Platform device and platform driver fro cros-ec-codec.
+ */
+static int cros_ec_codec_platform_probe(struct platform_device *pd)
+{
+       struct device *dev = &pd->dev;
+       struct cros_ec_device *ec_device = dev_get_drvdata(pd->dev.parent);
+       struct cros_ec_codec_data *codec_data;
+       int rc;
+
+       dev_dbg(dev, "%s start\n", __func__);

Remove the debug trace.

sound/soc/codecs/cros_ec_codec.c line 447

Quoted 8 lines
sound/soc/codecs/cros_ec_codec.c new file +8 -0
+
+       /*
+        * If the parent ec device has not been probed yet, defer the probe.
+        */
+       if (ec_device == NULL) {
+               dev_dbg(dev, "No EC device found yet.\n");
+               return -EPROBE_DEFER;
+       }

I think this check is unnecessary. The parent (mfd) will instantiate this driver so will be always there. Probably this is a copy from other cros-ec drivers that have also this unnecessary check. Did you find a use case where this is necessary?

Quoted 17 lines
sound/soc/codecs/cros_ec_codec.c new file +17 -0
+
+       codec_data = devm_kzalloc(dev, sizeof(struct cros_ec_codec_data),
+                                 GFP_KERNEL);
+       if (!codec_data)
+               return -ENOMEM;
+
+       codec_data->dev = dev;
+       codec_data->ec_device = ec_device;
+
+       platform_set_drvdata(pd, codec_data);
+
+       rc = snd_soc_register_component(dev, &cros_ec_component_driver,
+                                       cros_ec_dai, ARRAY_SIZE(cros_ec_dai));
+
+       dev_dbg(dev, "%s done\n", __func__);
+
+       return 0;

sound/soc/codecs/cros_ec_codec.c line 474

Quoted 10 lines
sound/soc/codecs/cros_ec_codec.c new file +10 -0
+}
+
+static int cros_ec_codec_platform_remove(struct platform_device *pd)
+{
+       struct device *dev = &pd->dev;
+
+       dev_dbg(dev, "%s\n", __func__);
+
+       return 0;
+}

I think you can remove this function it j only prints a message and as I said you can use trace tools for that.

sound/soc/codecs/cros_ec_codec.c line 487

Quoted 13 lines
sound/soc/codecs/cros_ec_codec.c new file +13 -0
+
+#ifdef CONFIG_OF
+static const struct of_device_id cros_ec_codec_of_match[] = {
+       { .compatible = "google,cros-ec-codec" },
+       {},
+};
+MODULE_DEVICE_TABLE(of, cros_ec_codec_of_match);
+#endif
+
+static struct platform_driver cros_ec_codec_platform_driver = {
+       .driver = {
+               .name = DRV_NAME,
+               .owner = THIS_MODULE,

I think is not necessary set the .owner here.

sound/soc/codecs/cros_ec_codec.c line 491

Quoted 4 lines
sound/soc/codecs/cros_ec_codec.c new file +4 -0
+               .of_match_table = of_match_ptr(cros_ec_codec_of_match),
+       },
+       .probe = cros_ec_codec_platform_probe,
+       .remove = cros_ec_codec_platform_remove,

.remove can go away.

sound/soc/codecs/cros_ec_codec.c line 497

Quoted 6 lines
sound/soc/codecs/cros_ec_codec.c new file +6 -0
+};
+
+module_platform_driver(cros_ec_codec_platform_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Chrome EC codec driver");

ChromeOS

Quoted 12 lines
sound/soc/codecs/cros_ec_codec.c new file +2 -0
+MODULE_AUTHOR("Cheng-Yi Chiang <[email protected]>");
+MODULE_ALIAS("platform:" DRV_NAME);
sound/soc/codecs/cros_ec_codec.h new file +4 -0
new file mode 100644
index 0000000000000..3a72e16a7ba65
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * ChromeOS EC Codec
+ *

sound/soc/codecs/cros_ec_codec.h line 14

Quoted 10 lines
sound/soc/codecs/cros_ec_codec.h new file +10 -0
+ * Copyright 2018 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.

Remove the License boilerplate

sound/soc/codecs/cros_ec_codec.h line 26

Quoted 12 lines
sound/soc/codecs/cros_ec_codec.h new file +12 -0
+ */
+
+#ifndef __CROS_EC_CODEC_H
+#define __CROS_EC_CODEC_H
+
+/*
+ * struct cros_ec_codec_data - ChromeOS EC codec driver data.
+ *
+ * @dev: Device structure used in sysfs.
+ * @ec_device: cros_ec_device structure to talk to the physical device.
+ * @component: Pointer to the component.
+ */

Please use the kernel documentation format here.

Thanks,
Enric

Quoted 14 lines
sound/soc/codecs/cros_ec_codec.h new file +7 -1
+struct cros_ec_codec_data {
+       struct device *dev;
+       struct cros_ec_device *ec_device;
+       struct snd_soc_component *component;
+};
+
+#endif  /* __CROS_EC_CODEC_H */
--

2.20.0.rc0.387.gc7a69e6b6c-goog

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

author maintainer
#4 lore raw

Re: [alsa-devel] [PATCH 3/3] ASoC: cros_ec_codec: Add codec driver for Cros EC

Quoted 7 lines · Enric Balletbo Serra

Hi Cheng-Yi

Many thanks for the patch. I am not really an ASoC expert, so my comments are more based on the feedback for other cros-ec drivers. So, various nits and few comments below.

Hi Enric,
Thank you for the review and sorry for the late response.
It took me a while to clean up this patches. I have addressed all your comments in v2.

Quoted 3 lines

The first question I'd like to ask is if there is any EC_FEATURE that tells you that the cros-ec has the codec. And second (if you can answer), could you tell me which device you used to test this?

Yes, there is an EC_FEATURE = 38 on EC side, which was added in this
CL: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1192702
But on kernel side for the board I am using, it is not used because the presence of EC is from entry in DTS.
This is different from MFD ec_device_probe path in drivers/mfd/cros_ec_dev.c. The device I am using to test this codec driver is Qualcomm SDM845 board.

Quoted 20 lines

Missatge de Cheng-Yi Chiang <[email protected]> del dia dt., 27 de nov. 2018 a les 13:02:

Quoted 17 lines

Add a codec driver to control ChromeOS EC codec.

Use EC Host command to enable/disable I2S recording and control other configurations.

---
 MAINTAINERS                      |   1 +
 sound/soc/codecs/Kconfig         |   8 +
 sound/soc/codecs/Makefile        |   2 +
 sound/soc/codecs/cros_ec_codec.c | 499 +++++++++++++++++++++++++++++++
 sound/soc/codecs/cros_ec_codec.h |  33 ++
 5 files changed, 543 insertions(+)
 create mode 100644 sound/soc/codecs/cros_ec_codec.c
 create mode 100644 sound/soc/codecs/cros_ec_codec.h
Quoted 8 lines

MAINTAINERS CHROME EC CODEC DRIVER

Quoted 5 lines
MAINTAINERS +0 -0
index 5cf8ab296cc61..f1999ef19d1cc 100644
@@ -3556,6 +3556,7 @@ CHROME EC CODEC DRIVER

Trying to be coherent with names s/CHROME/CHROMEOS/

Fixed in v2.

Quoted 7 lines

MAINTAINERS CHROME EC CODEC DRIVER · line 3556

Quoted 1 line
MAINTAINERS +0 -0
 M:     Cheng-Yi Chiang <[email protected]>

Do you mind adding me as a reviewer? I am interested in review all the cros-ec related patches.

R: Enric Balletbo i Serra <[email protected]>

No problem.
Fixed in v2.

Quoted 22 lines
Quoted 22 lines
MAINTAINERS +1 -0
 S:     Maintained
 F:     Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt
+F:     sound/soc/codecs/cros_ec_codec.*
 
 CIRRUS LOGIC AUDIO CODEC DRIVERS
 M:     Brian Austin <[email protected]>
sound/soc/codecs/Kconfig +1 -0
index efb095dbcd714..3e3e9294c0259 100644
@@ -49,6 +49,7 @@ config SND_SOC_ALL_CODECS
        select SND_SOC_BT_SCO
        select SND_SOC_BD28623
        select SND_SOC_CQ0093VC
+       select SND_SOC_CROS_EC_CODEC
        select SND_SOC_CS35L32 if I2C
        select SND_SOC_CS35L33 if I2C
        select SND_SOC_CS35L34 if I2C
@@ -445,6 +446,13 @@ config SND_SOC_CPCAP
 config SND_SOC_CQ0093VC
        tristate
 
Quoted 5 lines

sound/soc/codecs/Kconfig config SND_SOC_CPCAP · line 450

Quoted 2 lines
sound/soc/codecs/Kconfig +2 -0
+config SND_SOC_CROS_EC_CODEC
+       tristate "codec driver for Cros EC"

s/Cros EC/ChromeOS EC

Fixed in v2.

Quoted 5 lines

sound/soc/codecs/Kconfig config SND_SOC_CPCAP · line 454

Quoted 4 lines
sound/soc/codecs/Kconfig +4 -0
+       depends on MFD_CROS_EC
+       help
+         If you say yes here you will get support for the
+         Chrome OS Embedded Controller's Audio Codec.
Quoted 8 lines

nit: s/Chrome OS/ChromeOS/

Based on past discussions It's not really clear if you should use Chrome OS or ChromeOS. Personally, I like the second version which is more used but I don't mind which one you use, but don't mix Chrome OS and ChromeOS, use the same form for in your patch. I'll point you where you used "Chrome OS" in this review.

I should use ChromeOS.
Fixed in v2.

Quoted 30 lines
Quoted 30 lines
sound/soc/codecs/Kconfig +1 -0
+
 config SND_SOC_CS35L32
        tristate "Cirrus Logic CS35L32 CODEC"
        depends on I2C
sound/soc/codecs/Makefile +2 -0
index 7ae7c85e8219f..ff05c260c5776 100644
@@ -41,6 +41,7 @@ snd-soc-bd28623-objs := bd28623.o
 snd-soc-bt-sco-objs := bt-sco.o
 snd-soc-cpcap-objs := cpcap.o
 snd-soc-cq93vc-objs := cq93vc.o
+snd-soc-cros-ec-codec-objs := cros_ec_codec.o
 snd-soc-cs35l32-objs := cs35l32.o
 snd-soc-cs35l33-objs := cs35l33.o
 snd-soc-cs35l34-objs := cs35l34.o
@@ -301,6 +302,7 @@ obj-$(CONFIG_SND_SOC_BD28623)       += snd-soc-bd28623.o
 obj-$(CONFIG_SND_SOC_BT_SCO)   += snd-soc-bt-sco.o
 obj-$(CONFIG_SND_SOC_CQ0093VC) += snd-soc-cq93vc.o
 obj-$(CONFIG_SND_SOC_CPCAP)    += snd-soc-cpcap.o
+obj-$(CONFIG_SND_SOC_CROS_EC_CODEC)    += snd-soc-cros-ec-codec.o
 obj-$(CONFIG_SND_SOC_CS35L32)  += snd-soc-cs35l32.o
 obj-$(CONFIG_SND_SOC_CS35L33)  += snd-soc-cs35l33.o
 obj-$(CONFIG_SND_SOC_CS35L34)  += snd-soc-cs35l34.o
sound/soc/codecs/cros_ec_codec.c new file +0 -0
new file mode 100644
index 0000000000000..e24174c11a7de
@@ -0,0 +1,499 @@
Quoted 9 lines

sound/soc/codecs/cros_ec_codec.c line 3

Quoted 3 lines
sound/soc/codecs/cros_ec_codec.c new file +3 -0
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * cros_ec_codec - Driver for Chrome OS Embedded Controller codec.

nit: remove "cros_ec_code -" just put the description here. If for some weird reason the file changes the name this will be probably incorrect and doesn't apport anything.
nit: s/Chrome OS/ChromeOS/

Fixed in v2.

Quoted 13 lines

sound/soc/codecs/cros_ec_codec.c line 15

Quoted 12 lines
sound/soc/codecs/cros_ec_codec.c new file +12 -0
+ *
+ * Copyright 2018 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
Quoted 2 lines

You can remove LICENSE boilerplate, is inherent to the SPDX-License-Identifier.

Fixed in v2.

Quoted 4 lines

sound/soc/codecs/cros_ec_codec.c line 16

Quoted 1 line
sound/soc/codecs/cros_ec_codec.c new file +1 -0
+ * This driver uses the cros-ec interface to communicate with the Chrome OS

nit: s/Chrome OS/ChromeOS/

Fixed in v2.

Quoted 8 lines
Quoted 8 lines
sound/soc/codecs/cros_ec_codec.c new file +8 -0
+ * EC for audio function.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
Quoted 9 lines

sound/soc/codecs/cros_ec_codec.c line 30

Quoted 6 lines
sound/soc/codecs/cros_ec_codec.c new file +6 -0
+#include <linux/module.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+#include <linux/platform_device.h>

nit: I like see alphabetical order here

Fixed in v2.

Quoted 9 lines
Quoted 9 lines
sound/soc/codecs/cros_ec_codec.c new file +9 -0
+
+#include "cros_ec_codec.h"
+
+#define MAX_GAIN 43
+
+#define DRV_NAME "cros-ec-codec"
+
+static const DECLARE_TLV_DB_SCALE(ec_mic_gain_tlv, 0, 100, 0);
+/*
Quoted 9 lines

sound/soc/codecs/cros_ec_codec.c line 44

Quoted 5 lines
sound/soc/codecs/cros_ec_codec.c new file +5 -0
+ * Wrapper for EC command.
+ */
+static int ec_command(struct snd_soc_component *component, int version,
+                     int command, uint8_t *outdata, int outsize,
+                     uint8_t *indata, int insize)

nit: s/uint8_t/u8/ checkpatch --strict ? Will spot more format issues in this patch. I'm going to add some of these to this review as a nit.

Thank you for the reminder. Using --strict is better. Fixed in v2.

Quoted 5 lines

sound/soc/codecs/cros_ec_codec.c line 46

Quoted 2 lines
sound/soc/codecs/cros_ec_codec.c new file +2 -0
+{
+       struct cros_ec_codec_data *codec_data = snd_soc_component_get_drvdata(

nit: Lines should not end with a '('

Fixed in v2.

Quoted 21 lines
Quoted 21 lines
sound/soc/codecs/cros_ec_codec.c new file +21 -0
+                       component);
+       struct cros_ec_device *ec_device = codec_data->ec_device;
+       struct cros_ec_command *msg;
+       int ret;
+
+       msg = kzalloc(sizeof(*msg) + max(insize, outsize), GFP_KERNEL);
+       if (!msg)
+               return -ENOMEM;
+
+       msg->version = version;
+       msg->command = command;
+       msg->outsize = outsize;
+       msg->insize = insize;
+
+       if (outsize)
+               memcpy(msg->data, outdata, outsize);
+
+       ret = cros_ec_cmd_xfer_status(ec_device, msg);
+       if (ret > 0 && insize)
+               memcpy(indata, msg->data, insize);
+
Quoted 9 lines

sound/soc/codecs/cros_ec_codec.c line 73

Quoted 6 lines
sound/soc/codecs/cros_ec_codec.c new file +6 -0
+       kfree(msg);
+       return ret;
+}
+
+static int set_i2s_config(struct snd_soc_component *component,
+                         enum ec_i2s_config i2s_config)

nit: Alignment should match open parenthesis

Fixed in v2.

Quoted 6 lines
Quoted 6 lines
sound/soc/codecs/cros_ec_codec.c new file +6 -0
+{
+       struct ec_param_codec_i2s param;
+       int ret;
+
+       dev_dbg(component->dev, "%s set I2S format to %u\n", __func__,
+               i2s_config);
Quoted 9 lines

sound/soc/codecs/cros_ec_codec.c line 85

Quoted 6 lines
sound/soc/codecs/cros_ec_codec.c new file +6 -0
+
+       param.cmd = EC_CODEC_I2S_SET_CONFIG;
+       param.i2s_config = i2s_config;
+
+       ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
+                        (uint8_t *)&param, sizeof(param),

nit: Prefer kernel type 'u8' over 'uint8_t'

Fixed in v2.

Quoted 11 lines
Quoted 11 lines
sound/soc/codecs/cros_ec_codec.c new file +11 -0
+                        NULL, 0);
+       if (ret < 0) {
+               dev_err(component->dev,
+                       "set I2S format to %u command returned 0x%x\n",
+                       i2s_config, ret);
+               return -EINVAL;
+       }
+       return 0;
+}
+
+static int cros_ec_i2s_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
Quoted 9 lines

sound/soc/codecs/cros_ec_codec.c line 101

Quoted 5 lines
sound/soc/codecs/cros_ec_codec.c new file +5 -0
+{
+       struct snd_soc_component *component = dai->component;
+       enum ec_i2s_config i2s_config;
+
+       dev_dbg(component->dev, "%s enter\n", __func__);

Entry and exit debugging log are not really useful, and you can use kernel trace tools to check that, so better remove it.

Fixed in v2.

Quoted 37 lines
Quoted 37 lines
sound/soc/codecs/cros_ec_codec.c new file +37 -0
+
+       switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+       case SND_SOC_DAIFMT_CBS_CFS:
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+       case SND_SOC_DAIFMT_NB_NF:
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+       case SND_SOC_DAIFMT_I2S:
+               i2s_config = EC_DAI_FMT_I2S;
+               break;
+
+       case SND_SOC_DAIFMT_RIGHT_J:
+               i2s_config = EC_DAI_FMT_RIGHT_J;
+               break;
+
+       case SND_SOC_DAIFMT_LEFT_J:
+               i2s_config = EC_DAI_FMT_LEFT_J;
+               break;
+
+       case SND_SOC_DAIFMT_DSP_A:
+               i2s_config = EC_DAI_FMT_PCM_A;
+               break;
+
+       case SND_SOC_DAIFMT_DSP_B:
+               i2s_config = EC_DAI_FMT_PCM_B;
+               break;
+
+       default:
Quoted 9 lines

sound/soc/codecs/cros_ec_codec.c line 144

Quoted 6 lines
sound/soc/codecs/cros_ec_codec.c new file +6 -0
+               return -EINVAL;
+       }
+
+       set_i2s_config(component, i2s_config);
+
+       dev_dbg(component->dev, "%s set I2S DAI format\n", __func__);

Remove this debug message it is only used to trace the exit of the function.

Fixed in v2.

Quoted 111 lines
Quoted 111 lines
sound/soc/codecs/cros_ec_codec.c new file +111 -0
+
+       return 0;
+}
+
+static int set_i2s_sample_depth(struct snd_soc_component *component,
+                               enum ec_sample_depth_value depth)
+{
+       struct ec_param_codec_i2s param;
+       int ret;
+
+       dev_dbg(component->dev, "%s set depth to %u\n", __func__, depth);
+
+       param.cmd = EC_CODEC_SET_SAMPLE_DEPTH;
+       param.depth = depth;
+
+       ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
+                        (uint8_t *)&param, sizeof(param),
+                        NULL, 0);
+       if (ret < 0) {
+               dev_err(component->dev, "I2S sample depth %u returned 0x%x\n",
+                       depth, ret);
+               return -EINVAL;
+       }
+       return 0;
+}
+
+static int set_bclk(struct snd_soc_component *component, uint32_t bclk)
+{
+       struct ec_param_codec_i2s param;
+       int ret;
+
+       dev_dbg(component->dev, "%s set i2s bclk to %u\n", __func__, bclk);
+
+       param.cmd = EC_CODEC_I2S_SET_BCLK;
+       param.bclk = bclk;
+
+       ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
+                        (uint8_t *)&param, sizeof(param),
+                        NULL, 0);
+       if (ret < 0) {
+               dev_err(component->dev, "I2S set bclk %u command returned 0x%x\n",
+                       bclk, ret);
+               return -EINVAL;
+       }
+       return 0;
+}
+
+static int cros_ec_i2s_hw_params(struct snd_pcm_substream *substream,
+       struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+       struct snd_soc_component *component = dai->component;
+       int frame_size;
+       unsigned int rate, bclk;
+       int ret;
+
+       frame_size = snd_soc_params_to_frame_size(params);
+       if (frame_size < 0) {
+               dev_err(component->dev, "Unsupported frame size: %d\n",
+                       frame_size);
+               return -EINVAL;
+       }
+
+       rate = params_rate(params);
+       if (rate != 48000) {
+               dev_err(component->dev, "Unsupported rate\n");
+               return -EINVAL;
+       }
+
+       switch (params_format(params)) {
+       case SNDRV_PCM_FORMAT_S16_LE:
+               ret = set_i2s_sample_depth(component, EC_CODEC_SAMPLE_DEPTH_16);
+               break;
+       case SNDRV_PCM_FORMAT_S24_LE:
+               ret = set_i2s_sample_depth(component, EC_CODEC_SAMPLE_DEPTH_24);
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       if (ret)
+               return ret;
+
+       bclk = snd_soc_params_to_bclk(params);
+       ret = set_bclk(component, bclk);
+
+       return ret;
+}
+
+static const struct snd_soc_dai_ops cros_ec_i2s_dai_ops = {
+       .hw_params = cros_ec_i2s_hw_params,
+       .set_fmt = cros_ec_i2s_set_dai_fmt,
+};
+
+struct snd_soc_dai_driver cros_ec_dai[] = {
+       {
+               .name = "cros_ec_codec I2S",
+               .id = 0,
+               .capture = {
+                       .stream_name = "I2S Capture",
+                       .channels_min = 2,
+                       .channels_max = 2,
+                       .rates = SNDRV_PCM_RATE_48000,
+                       .formats = SNDRV_PCM_FMTBIT_S16_LE |
+                                  SNDRV_PCM_FMTBIT_S24_LE,
+               },
+               .ops = &cros_ec_i2s_dai_ops,
+       }
+};
+
+static int get_ec_mic_gain(struct snd_soc_component *component,
+                          uint8_t *left, uint8_t *right)
Quoted 9 lines

sound/soc/codecs/cros_ec_codec.c line 261

Quoted 6 lines
sound/soc/codecs/cros_ec_codec.c new file +6 -0
+{
+       struct ec_param_codec_i2s param;
+       struct ec_response_codec_gain resp;
+       int ret;
+
+       dev_dbg(component->dev, "%s get mic gain\n", __func__);

Remove the trace.

Fixed in v2.

Quoted 53 lines
Quoted 53 lines
sound/soc/codecs/cros_ec_codec.c new file +53 -0
+
+       param.cmd = EC_CODEC_GET_GAIN;
+
+       ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
+                        (uint8_t *)&param, sizeof(param),
+                        (uint8_t *)&resp, sizeof(resp));
+       if (ret < 0) {
+               dev_err(component->dev, "I2S get gain command returned 0x%x\n",
+                       ret);
+               return -EINVAL;
+       }
+
+       *left = resp.left;
+       *right = resp.right;
+
+       dev_dbg(component->dev, "%s get mic gain %u, %u\n", __func__,
+               *left, *right);
+
+       return 0;
+}
+
+static int mic_gain_get(struct snd_kcontrol *kcontrol,
+                       struct snd_ctl_elem_value *ucontrol)
+{
+       struct snd_soc_component *component = snd_soc_kcontrol_component(
+                       kcontrol);
+       uint8_t left, right;
+       int ret;
+
+       ret = get_ec_mic_gain(component, &left, &right);
+
+       if (ret)
+               return ret;
+
+       ucontrol->value.integer.value[0] = left;
+       ucontrol->value.integer.value[1] = right;
+
+       return 0;
+}
+
+static int set_ec_mic_gain(struct snd_soc_component *component,
+                          uint8_t left, uint8_t right)
+{
+       struct ec_param_codec_i2s param;
+       int ret;
+
+       dev_dbg(component->dev, "%s set mic gain to %u, %u\n",
+               __func__, left, right);
+
+       param.cmd = EC_CODEC_SET_GAIN;
+       param.gain.left = left;
+       param.gain.right = right;
+
Quoted 9 lines

sound/soc/codecs/cros_ec_codec.c line 319

Quoted 5 lines
sound/soc/codecs/cros_ec_codec.c new file +5 -0
+       ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
+                        (uint8_t *)&param, sizeof(param),
+                        NULL, 0);
+       if (ret < 0) {
+               dev_err(component->dev, "I2S set gain command returned 0x%x\n",

%d ? Doesn't make more sense print the decimal format here? I know that other cros_ec drivers do this, is something to fix I guess.

Fixed in v2. Also fixed in other places.

Quoted 94 lines
Quoted 94 lines
sound/soc/codecs/cros_ec_codec.c new file +94 -0
+                       ret);
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
+static int mic_gain_put(struct snd_kcontrol *kcontrol,
+                       struct snd_ctl_elem_value *ucontrol)
+{
+       struct snd_soc_component *component = snd_soc_kcontrol_component(
+                       kcontrol);
+       int left = ucontrol->value.integer.value[0];
+       int right = ucontrol->value.integer.value[1];
+       int ret;
+
+       if (left > MAX_GAIN || right > MAX_GAIN)
+               return -EINVAL;
+
+       ret = set_ec_mic_gain(component, (uint8_t)left, (uint8_t)right);
+
+       if (ret)
+               return ret;
+
+       return 0;
+}
+
+static const struct snd_kcontrol_new cros_ec_snd_controls[] = {
+       SOC_DOUBLE_EXT_TLV("EC Mic Gain", SND_SOC_NOPM, SND_SOC_NOPM, 0, 43, 0,
+                          mic_gain_get, mic_gain_put, ec_mic_gain_tlv)
+};
+
+static int enable_i2s(struct snd_soc_component *component, int enable)
+{
+       struct ec_param_codec_i2s param;
+       int ret;
+
+       dev_dbg(component->dev, "%s set i2s to %u\n", __func__, enable);
+
+       param.cmd = EC_CODEC_I2S_ENABLE;
+       param.i2s_enable = enable;
+
+       ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
+                        (uint8_t *)&param, sizeof(param),
+                        NULL, 0);
+       if (ret < 0) {
+               dev_err(component->dev, "I2S enable %d command returned 0x%x\n",
+                        enable, ret);
+               return -EINVAL;
+       }
+       return 0;
+}
+
+static int cros_ec_i2s_enable_event(struct snd_soc_dapm_widget *w,
+                            struct snd_kcontrol *kcontrol, int event)
+{
+       struct snd_soc_component *component = snd_soc_dapm_to_component(
+                       w->dapm);
+
+       dev_dbg(component->dev, "%s enter\n", __func__);
+
+       switch (event) {
+
+       case SND_SOC_DAPM_PRE_PMU:
+               dev_dbg(component->dev,
+                       "%s got SND_SOC_DAPM_PRE_PMU event\n", __func__);
+               return enable_i2s(component, 1);
+
+       case SND_SOC_DAPM_PRE_PMD:
+               dev_dbg(component->dev,
+                       "%s got SND_SOC_DAPM_PRE_PMD event\n", __func__);
+               return enable_i2s(component, 0);
+       }
+
+       return 0;
+}
+
+/*
+ * The goal of this DAPM route is to turn on/off I2S using EC
+ * host command when capture stream is started/stopped.
+ */
+static const struct snd_soc_dapm_widget cros_ec_dapm_widgets[] = {
+       SND_SOC_DAPM_INPUT("DMIC"),
+
+       /*
+        * Control EC to enable/disable I2S.
+        */
+       SND_SOC_DAPM_SUPPLY("I2S Enable", SND_SOC_NOPM,
+                           0, 0, cros_ec_i2s_enable_event,
+                           SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
+
+       SND_SOC_DAPM_AIF_OUT("I2STX", "I2S Capture", 0, SND_SOC_NOPM, 0, 0),
+};
+
Quoted 9 lines

sound/soc/codecs/cros_ec_codec.c line 419

Quoted 6 lines
sound/soc/codecs/cros_ec_codec.c new file +6 -0
+static const struct snd_soc_dapm_route cros_ec_dapm_routes[] = {
+       { "I2STX", NULL, "DMIC" },
+       { "I2STX", NULL, "I2S Enable" },
+};
+
+

nit: Please don't use multiple blank lines.

Fixed in v2.

Quoted 14 lines
Quoted 14 lines
sound/soc/codecs/cros_ec_codec.c new file +14 -0
+static const struct snd_soc_component_driver cros_ec_component_driver = {
+       .controls               = cros_ec_snd_controls,
+       .num_controls           = ARRAY_SIZE(cros_ec_snd_controls),
+       .dapm_widgets           = cros_ec_dapm_widgets,
+       .num_dapm_widgets       = ARRAY_SIZE(cros_ec_dapm_widgets),
+       .dapm_routes            = cros_ec_dapm_routes,
+       .num_dapm_routes        = ARRAY_SIZE(cros_ec_dapm_routes),
+};
+
+/*
+ * Platform device and platform driver fro cros-ec-codec.
+ */
+static int cros_ec_codec_platform_probe(struct platform_device *pd)
+{
Quoted 9 lines

sound/soc/codecs/cros_ec_codec.c line 439

Quoted 6 lines
sound/soc/codecs/cros_ec_codec.c new file +6 -0
+       struct device *dev = &pd->dev;
+       struct cros_ec_device *ec_device = dev_get_drvdata(pd->dev.parent);
+       struct cros_ec_codec_data *codec_data;
+       int rc;
+
+       dev_dbg(dev, "%s start\n", __func__);

Remove the debug trace.

Fixed in v2.

Quoted 9 lines

sound/soc/codecs/cros_ec_codec.c line 447

Quoted 8 lines
sound/soc/codecs/cros_ec_codec.c new file +8 -0
+
+       /*
+        * If the parent ec device has not been probed yet, defer the probe.
+        */
+       if (ec_device == NULL) {
+               dev_dbg(dev, "No EC device found yet.\n");
+               return -EPROBE_DEFER;
+       }
Quoted 5 lines

I think this check is unnecessary. The parent (mfd) will instantiate this driver so will be always there. Probably this is a copy from other cros-ec drivers that have also this unnecessary check. Did you find a use case where this is necessary?

Thank you for pointing this out.
In my use case, device is created from DTS, not MFD. But I think you are right that parent will be created first so I should remove this.
The place that I saw this usage was on cros_ec_keyb_probe for ACPI flow only so it should be a different path.
https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/450838/6/drivers/input/keyboard/cros_ec_keyb.c#620

Quoted 22 lines
Quoted 22 lines
sound/soc/codecs/cros_ec_codec.c new file +22 -0
+
+       codec_data = devm_kzalloc(dev, sizeof(struct cros_ec_codec_data),
+                                 GFP_KERNEL);
+       if (!codec_data)
+               return -ENOMEM;
+
+       codec_data->dev = dev;
+       codec_data->ec_device = ec_device;
+
+       platform_set_drvdata(pd, codec_data);
+
+       rc = snd_soc_register_component(dev, &cros_ec_component_driver,
+                                       cros_ec_dai, ARRAY_SIZE(cros_ec_dai));
+
+       dev_dbg(dev, "%s done\n", __func__);
+
+       return 0;
+}
+
+static int cros_ec_codec_platform_remove(struct platform_device *pd)
+{
+       struct device *dev = &pd->dev;
Quoted 9 lines

sound/soc/codecs/cros_ec_codec.c line 474

Quoted 5 lines
sound/soc/codecs/cros_ec_codec.c new file +5 -0
+
+       dev_dbg(dev, "%s\n", __func__);
+
+       return 0;
+}

I think you can remove this function it j only prints a message and as I said you can use trace tools for that.

Fixed in v2.

Quoted 7 lines
Quoted 7 lines
sound/soc/codecs/cros_ec_codec.c new file +7 -0
+
+#ifdef CONFIG_OF
+static const struct of_device_id cros_ec_codec_of_match[] = {
+       { .compatible = "google,cros-ec-codec" },
+       {},
+};
+MODULE_DEVICE_TABLE(of, cros_ec_codec_of_match);
Quoted 9 lines

sound/soc/codecs/cros_ec_codec.c line 487

Quoted 6 lines
sound/soc/codecs/cros_ec_codec.c new file +6 -0
+#endif
+
+static struct platform_driver cros_ec_codec_platform_driver = {
+       .driver = {
+               .name = DRV_NAME,
+               .owner = THIS_MODULE,

I think is not necessary set the .owner here.

Fixed in v2.

Quoted 7 lines

sound/soc/codecs/cros_ec_codec.c line 491

Quoted 4 lines
sound/soc/codecs/cros_ec_codec.c new file +4 -0
+               .of_match_table = of_match_ptr(cros_ec_codec_of_match),
+       },
+       .probe = cros_ec_codec_platform_probe,
+       .remove = cros_ec_codec_platform_remove,

.remove can go away.

Fixed in v2.

Quoted 9 lines

sound/soc/codecs/cros_ec_codec.c line 497

Quoted 6 lines
sound/soc/codecs/cros_ec_codec.c new file +6 -0
+};
+
+module_platform_driver(cros_ec_codec_platform_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Chrome EC codec driver");

ChromeOS

Fixed in v2.

Quoted 16 lines
Quoted 16 lines
sound/soc/codecs/cros_ec_codec.c new file +2 -0
+MODULE_AUTHOR("Cheng-Yi Chiang <[email protected]>");
+MODULE_ALIAS("platform:" DRV_NAME);
sound/soc/codecs/cros_ec_codec.h new file +8 -0
new file mode 100644
index 0000000000000..3a72e16a7ba65
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * ChromeOS EC Codec
+ *
+ * Copyright 2018 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
Quoted 9 lines

sound/soc/codecs/cros_ec_codec.h line 14

Quoted 6 lines
sound/soc/codecs/cros_ec_codec.h new file +6 -0
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.

Remove the License boilerplate

Fixed in v2.

Quoted 6 lines
Quoted 6 lines
sound/soc/codecs/cros_ec_codec.h new file +6 -0
+ */
+
+#ifndef __CROS_EC_CODEC_H
+#define __CROS_EC_CODEC_H
+
+/*
Quoted 9 lines

sound/soc/codecs/cros_ec_codec.h line 26

Quoted 6 lines
sound/soc/codecs/cros_ec_codec.h new file +6 -0
+ * struct cros_ec_codec_data - ChromeOS EC codec driver data.
+ *
+ * @dev: Device structure used in sysfs.
+ * @ec_device: cros_ec_device structure to talk to the physical device.
+ * @component: Pointer to the component.
+ */

Please use the kernel documentation format here.

Fixed in v2.

Quoted 2 lines

Thanks,
Enric

Thanks a lot for the detailed review!

Quoted 14 lines
Quoted 14 lines
sound/soc/codecs/cros_ec_codec.h new file +7 -1
+struct cros_ec_codec_data {
+       struct device *dev;
+       struct cros_ec_device *ec_device;
+       struct snd_soc_component *component;
+};
+
+#endif  /* __CROS_EC_CODEC_H */
--

2.20.0.rc0.387.gc7a69e6b6c-goog

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Applied
#5 lore raw
In reply to Cheng-Yi Chiang
Quoted 6 lines · Cheng-Yi Chiang

Add EC host commands to control codec on EC.

---
 include/linux/mfd/cros_ec_commands.h | 94 ++++++++++++++++++++++++++++
 1 file changed, 94 insertions(+)

Applied, thanks.

Signature · 4 lines
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
#6 lore raw
Quoted 10 lines · Lee Jones
Quoted 6 lines · Cheng-Yi Chiang

Add EC host commands to control codec on EC.

---
 include/linux/mfd/cros_ec_commands.h | 94 ++++++++++++++++++++++++++++
 1 file changed, 94 insertions(+)

Applied, thanks.

Turns out that this does not actually apply.

What is it based on?

Signature · 4 lines
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
author maintainer
#7 lore raw
Quoted 12 lines · Lee Jones
Quoted 9 lines · Lee Jones
Quoted 6 lines · Cheng-Yi Chiang

Add EC host commands to control codec on EC.

---
 include/linux/mfd/cros_ec_commands.h | 94 ++++++++++++++++++++++++++++
 1 file changed, 94 insertions(+)
Quoted 5 lines
Quoted 1 line

Applied, thanks.

Turns out that this does not actually apply.

What is it based on?

Hi Lee,
I am sorry about that!
The patch series was based on Mark Brown's tree (
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git ) for-next branch.
I will rebase it on upstream master branch in v2 when I address other comments in codec driver.
Thanks!

Quoted 6 lines

--
Lee Jones [李琼斯]
Linaro Services Technical Lead

Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
author maintainer
#8 lore raw

Hi Lee,

I tried to apply this patch based on
for-mfd-next branch of mfd tree (
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ) Then, I tried to compile all modules by

ARCH=x86_64 make allyesconfig
ARCH=x86_64 make -j64

There was no error.
Could you please let me know what was the error when you failed to apply this patch ?

Thanks!

Quoted 35 lines · Cheng-yi Chiang
Quoted 12 lines · Lee Jones
Quoted 9 lines · Lee Jones
Quoted 6 lines · Cheng-Yi Chiang

Add EC host commands to control codec on EC.

---
 include/linux/mfd/cros_ec_commands.h | 94 ++++++++++++++++++++++++++++
 1 file changed, 94 insertions(+)
Quoted 5 lines
Quoted 1 line

Applied, thanks.

Turns out that this does not actually apply.

What is it based on?

Hi Lee,
I am sorry about that!
The patch series was based on Mark Brown's tree (
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git ) for-next branch.
I will rebase it on upstream master branch in v2 when I address other comments in codec driver.
Thanks!

Quoted 6 lines

--
Lee Jones [李琼斯]
Linaro Services Technical Lead

Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
#9 lore raw
Quoted 7 lines · Cheng-yi Chiang

Hi Lee,

I tried to apply this patch based on
for-mfd-next branch of mfd tree (
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ) Then, I tried to compile all modules by

Quoted 6 lines

ARCH=x86_64 make allyesconfig
ARCH=x86_64 make -j64

There was no error.
Could you please let me know what was the error when you failed to apply this patch ?

Doesn't work for me.

lee@host:~/projects/kernel [for-mfd-next]$ formfdnext
Applying: mfd: cros_ec: Add commands to control codec
error: sha1 information is lacking or useless (include/linux/mfd/cros_ec_commands.h).
error: could not build fake ancestor
Patch failed at 0001 mfd: cros_ec: Add commands to control codec
Use 'git am --show-current-patch' to see the failed patch
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".

Quoted 31 lines · Cheng-yi Chiang
Quoted 30 lines · Lee Jones
Quoted 12 lines · Lee Jones
Quoted 10 lines · Cheng-Yi Chiang
Quoted 7 lines

Add EC host commands to control codec on EC.

---
 include/linux/mfd/cros_ec_commands.h | 94 ++++++++++++++++++++++++++++
 1 file changed, 94 insertions(+)
Quoted 5 lines
Quoted 1 line

Applied, thanks.

Turns out that this does not actually apply.

What is it based on?

Hi Lee,
I am sorry about that!
The patch series was based on Mark Brown's tree (
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git ) for-next branch.
I will rebase it on upstream master branch in v2 when I address other comments in codec driver.
Thanks!

Quoted 1 line
Signature · 4 lines
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
#10 lore raw
Quoted 18 lines · Lee Jones
Quoted 7 lines · Cheng-yi Chiang

Hi Lee,

I tried to apply this patch based on
for-mfd-next branch of mfd tree (
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ) Then, I tried to compile all modules by

Quoted 6 lines

ARCH=x86_64 make allyesconfig
ARCH=x86_64 make -j64

There was no error.
Could you please let me know what was the error when you failed to apply this patch ?

Doesn't work for me.

Quoted 9 lines

lee@host:~/projects/kernel [for-mfd-next]$ formfdnext
Applying: mfd: cros_ec: Add commands to control codec
error: sha1 information is lacking or useless (include/linux/mfd/cros_ec_commands.h).
error: could not build fake ancestor
Patch failed at 0001 mfd: cros_ec: Add commands to control codec
Use 'git am --show-current-patch' to see the failed patch
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".

Not that the following lines (as seen in your patch) are not present in the Mainline kernel.

include/linux/mfd/cros_ec_commands.h struct __ec_align1 ec_response_i2c_passthru_protect { · line 4078

Quoted 3 lines
include/linux/mfd/cros_ec_commands.h +0 -0
@@ -4077,6 +4077,100 @@ struct __ec_align1 ec_response_i2c_passthru_protect {
 	uint8_t status;		/* Status flags (0: unlocked, 1: locked) */
 };

Do you have other patches applied to your tree?

Signature · 4 lines
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
author maintainer
#11 lore raw
Quoted 31 lines · Lee Jones
Quoted 18 lines · Lee Jones
Quoted 7 lines · Cheng-yi Chiang

Hi Lee,

I tried to apply this patch based on
for-mfd-next branch of mfd tree (
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ) Then, I tried to compile all modules by

Quoted 6 lines

ARCH=x86_64 make allyesconfig
ARCH=x86_64 make -j64

There was no error.
Could you please let me know what was the error when you failed to apply this patch ?

Doesn't work for me.

Quoted 9 lines

lee@host:~/projects/kernel [for-mfd-next]$ formfdnext
Applying: mfd: cros_ec: Add commands to control codec
error: sha1 information is lacking or useless (include/linux/mfd/cros_ec_commands.h).
error: could not build fake ancestor
Patch failed at 0001 mfd: cros_ec: Add commands to control codec
Use 'git am --show-current-patch' to see the failed patch
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".

Quoted 8 lines

Not that the following lines (as seen in your patch) are not present in the Mainline kernel.

Review struct __ec_align1 ec_response_i2c_passthru_protect { · line 4078

Quoted 3 lines
(quoted diff) +0 -0
@@ -4077,6 +4077,100 @@ struct __ec_align1 ec_response_i2c_passthru_protect {
      uint8_t status;         /* Status flags (0: unlocked, 1: locked) */
 };

Do you have other patches applied to your tree?

Hi Lee,
Sorry, I see the problem.
I was using git am -3 which solves the conflict by itself. I will resend a patch based on your for-mfd-next branch so we can keep the patch clean.
Thanks for your time.

Quoted 6 lines

--
Lee Jones [李琼斯]
Linaro Services Technical Lead

Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
#12 lore raw
Quoted 41 lines · Cheng-yi Chiang
Quoted 31 lines · Lee Jones
Quoted 18 lines · Lee Jones
Quoted 7 lines · Cheng-yi Chiang

Hi Lee,

I tried to apply this patch based on
for-mfd-next branch of mfd tree (
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ) Then, I tried to compile all modules by

Quoted 6 lines

ARCH=x86_64 make allyesconfig
ARCH=x86_64 make -j64

There was no error.
Could you please let me know what was the error when you failed to apply this patch ?

Doesn't work for me.

Quoted 9 lines

lee@host:~/projects/kernel [for-mfd-next]$ formfdnext
Applying: mfd: cros_ec: Add commands to control codec
error: sha1 information is lacking or useless (include/linux/mfd/cros_ec_commands.h).
error: could not build fake ancestor
Patch failed at 0001 mfd: cros_ec: Add commands to control codec
Use 'git am --show-current-patch' to see the failed patch
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".

Quoted 8 lines

Not that the following lines (as seen in your patch) are not present in the Mainline kernel.

Review struct __ec_align1 ec_response_i2c_passthru_protect { · line 4078

Quoted 3 lines
(quoted diff) +0 -0
@@ -4077,6 +4077,100 @@ struct __ec_align1 ec_response_i2c_passthru_protect {
      uint8_t status;         /* Status flags (0: unlocked, 1: locked) */
 };

Do you have other patches applied to your tree?

Quoted 3 lines

Hi Lee,
Sorry, I see the problem.
I was using git am -3 which solves the conflict by itself.

That's what I use, but it still had issues.

Git is probably using a previous resolution in your case.

Quoted 3 lines

I will resend a patch based on your for-mfd-next branch so we can keep the patch clean.
Thanks for your time.

Signature · 8 lines
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel