i2c-multi-instantiate: Adapt for INT3515 and alike
v4 cover i2c-multi-instantiate: Adapt for INT3515 and alike
Currently i2c-multi-instantiate driver does not support the case of INT3515 USB PD device, where:
- Interrupt() is used instead of GpioInt()
- All slaves may be the same from IP point of view
- There can be variadic amount of slaves
This series is addressing all above.
Note, series has been smoke tested (Heikki would do BAT or more) on Intel Coffee Lake system.
The idea is to push this either through PDx86 tree (needs Rafael's ACKs) or ACPI. In any case it needs tags from Heikki, Hans, Mika, Wolfram and Jonathan.
Testing and comments are warmly welcome.
In v4:
- directly return -EPROBE_DEFER from i2c_acpi_new_device()
- due to above split error handling simplification to separate patches
In v3:
- revisit error codes returned by i2c_acpi_new_device() (Hans, Mika)
- add documentation to exported i2c_acpi_get_i2c_resource() (Mika)
- drop Hans' Rb tag in patch 5 due to changes
- append Mika's Ab tag to patch 6
In v2:
- drop patches to copy fwnode and to handle BOSC0200 device
- append check for amount of devices listed in the driver's mapping
- add Rb tag given by Hans
Andy Shevchenko (15):
defconfig: enable I2C_DEBUG_CORE
platform/x86: intel_cht_int33fe: Remove duplicate NULL check platform/x86: intel_cht_int33fe: Accept errors of
i2c_acpi_new_device()
platform/x86: i2c-multi-instantiate: Accept errors of
i2c_acpi_new_device() i2c: acpi: Return error pointers from i2c_acpi_new_device() platform/x86: intel_cht_int33fe: Get rid of obsolete conditional platform/x86: i2c-multi-instantiate: Get rid of obsolete conditional
i2c: acpi: Use ACPI_FAILURE instead of !ACPI_SUCCESS
i2c: acpi: Introduce i2c_acpi_get_i2c_resource() helper platform/x86: i2c-multi-instantiate: Count I2cSerialBus() resources platform/x86: i2c-multi-instantiate: Distinguish IRQ resource type platform/x86: i2c-multi-instantiate: Introduce IOAPIC IRQ support platform/x86: i2c-multi-instantiate: Allow to have same slaves ACPI / scan: Create platform device for INT3515 ACPI nodes
iio: inv_mpu6050: Use i2c_acpi_get_i2c_resource() helper
arch/x86/configs/i386_defconfig | 1 + arch/x86/configs/x86_64_defconfig | 1 + drivers/acpi/scan.c | 1 + drivers/i2c/i2c-core-acpi.c | 64 +++++++++---- drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c | 16 ++-- drivers/platform/x86/i2c-multi-instantiate.c | 97 ++++++++++++++++---- drivers/platform/x86/intel_cht_int33fe.c | 20 ++-- drivers/usb/typec/tps6598x.c | 8 +- include/linux/acpi.h | 11 +++ 9 files changed, 159 insertions(+), 60 deletions(-)
--
2.19.2
PATCH v4 1/15 defconfig: enable I2C_DEBUG_CORE
--- arch/x86/configs/i386_defconfig | 1 + arch/x86/configs/x86_64_defconfig | 1 + 2 files changed, 2 insertions(+)
arch/x86/configs/i386_defconfig +1 -0
@@ -320,6 +320,7 @@ CONFIG_I2C_DESIGNWARE_PCI=y CONFIG_I2C_DESIGNWARE_PLATFORM=m CONFIG_I2C_MUX=y CONFIG_I2C_MULTI_INSTANTIATE=m +CONFIG_I2C_DEBUG_CORE=y CONFIG_IIO=y CONFIG_INV_MPU6050_I2C=m CONFIG_GPIOLIB=y
arch/x86/configs/x86_64_defconfig +1 -0
@@ -318,6 +318,7 @@ CONFIG_I2C_DESIGNWARE_PCI=y CONFIG_I2C_DESIGNWARE_PLATFORM=m CONFIG_I2C_MUX=y CONFIG_I2C_MULTI_INSTANTIATE=m +CONFIG_I2C_DEBUG_CORE=y CONFIG_IIO=y CONFIG_INV_MPU6050_I2C=m CONFIG_GPIOLIB=y
Signature · 1 line
2.19.2
PATCH v4 2/15 platform/x86: intel_cht_int33fe: Remove duplicate NULL check
In reply to Andy ShevchenkoSince i2c_unregister_device() became NULL-aware we may remove duplicate NULL check.
--- drivers/platform/x86/intel_cht_int33fe.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/platform/x86/intel_cht_int33fe.c +2 -4
@@ -213,8 +213,7 @@ static int cht_int33fe_probe(struct platform_device *pdev)i2c_unregister_device (data->fusb302); out_unregister_max17047: -if (data->max17047) -i2c_unregister_device (data->max17047); +i2c_unregister_device (data->max17047);device_connections_remove (data->connections);
@@ -227,8 +226,7 @@ static int cht_int33fe_remove(struct platform_device *pdev)i2c_unregister_device (data->pi3usb30532);i2c_unregister_device (data->fusb302); -if (data->max17047) -i2c_unregister_device (data->max17047); +i2c_unregister_device (data->max17047);device_connections_remove (data->connections);
Signature · 1 line
2.19.2
PATCH v4 3/15 platform/x86: intel_cht_int33fe: Accept errors of i2c_acpi_new_device()
In reply to Andy ShevchenkoIn the future i2c_acpi_new_device() will return error pointer in some cases. Prepare intel_cht_int33fe driver to support that.
--- drivers/platform/x86/intel_cht_int33fe.c | 28 +++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-)
drivers/platform/x86/intel_cht_int33fe.c +23 -5
@@ -168,8 +168,14 @@ static int cht_int33fe_probe(struct platform_device *pdev) board_info.dev_name ="max17047" ; board_info.properties = max17047_props; data->max17047 =i2c_acpi_new_device (dev,1 , &board_info); -if (!data->max17047) -return -EPROBE_DEFER ;/* Wait for i2c-adapter to load */ +if (IS_ERR (data->max17047)) + ret =PTR_ERR (data->max17047); +else if (!data->max17047) + ret = -EPROBE_DEFER ;/* Wait for i2c-adapter to load */ +else + ret =0 ; +if (ret) +return ret; } data->connections[0 ].endpoint[0 ] ="port0" ;
@@ -194,7 +200,13 @@ static int cht_int33fe_probe(struct platform_device *pdev) board_info.irq = fusb302_irq; data->fusb302 =i2c_acpi_new_device (dev,2 , &board_info); -if (!data->fusb302) +if (IS_ERR (data->fusb302)) + ret =PTR_ERR (data->fusb302); +else if (!data->fusb302) + ret = -EPROBE_DEFER ;/* Wait for the i2c-adapter to load */ +else + ret =0 ; +if (ret) goto out_unregister_max17047;memset (&board_info,0 ,sizeof (board_info));
@@ -202,7 +214,13 @@ static int cht_int33fe_probe(struct platform_device *pdev)strlcpy (board_info.type,"pi3usb30532" ,I2C_NAME_SIZE ); data->pi3usb30532 =i2c_acpi_new_device (dev,3 , &board_info); -if (!data->pi3usb30532) +if (IS_ERR (data->pi3usb30532)) + ret =PTR_ERR (data->pi3usb30532); +else if (!data->pi3usb30532) + ret = -EPROBE_DEFER ;/* Wait for the i2c-adapter to load */ +else + ret =0 ; +if (ret) goto out_unregister_fusb302;platform_set_drvdata (pdev, data);
@@ -217,7 +235,7 @@ static int cht_int33fe_probe(struct platform_device *pdev)device_connections_remove (data->connections); -return -EPROBE_DEFER ;/* Wait for the i2c-adapter to load */ +return ret; }static int cht_int33fe_remove (struct platform_device *pdev)
Signature · 1 line
2.19.2
PATCH v4 4/15 platform/x86: i2c-multi-instantiate: Accept errors of i2c_acpi_new_device()
In reply to Andy ShevchenkoIn the future i2c_acpi_new_device() will return error pointer in some cases. Prepare i2c-multi-instantiate driver to support that.
--- drivers/platform/x86/i2c-multi-instantiate.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/platform/x86/i2c-multi-instantiate.c +7 -2
@@ -72,9 +72,14 @@ static int i2c_multi_inst_probe(struct platform_device *pdev) board_info.irq = ret; } multi->clients[i] =i2c_acpi_new_device (dev, i, &board_info); -if (!multi->clients[i]) { +if (IS_ERR (multi->clients[i])) + ret =PTR_ERR (multi->clients[i]); +else if (!multi->clients[i]) + ret = -EPROBE_DEFER ;/* Wait for i2c-adapter to load */ +else + ret =0 ; +if (ret) {dev_err (dev,"Error creating i2c-client, idx %d\n" , i); - ret = -ENODEV ; goto error; } }
Signature · 1 line
2.19.2
PATCH v4 5/15 i2c: acpi: Return error pointers from i2c_acpi_new_device()
In reply to Andy ShevchenkoThe caller would like to know the reason why the i2c_acpi_new_device() fails. For example, if adapter is not available, it might be in the future and we would like to re-probe the clients again. But at the same time we would like to bail out if the error seems unrecoverable, such as invalid argument supplied. To achieve this, return error pointer in some cases.
--- drivers/i2c/i2c-core-acpi.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-)
drivers/i2c/i2c-core-acpi.c +15 -6
@@ -386,20 +386,22 @@ struct notifier_block i2c_acpi_notifier = {* * Also see i2c_new_device, which this function calls to create the i2c-client. * -* Returns a pointer to the new i2c-client, or NULL if the adapter is not found. +* Returns a pointer to the new i2c-client, or error pointer in case of failure. +* Specifically, -EPROBE_DEFER is returned if the adapter is not found. */ struct i2c_client *i2c_acpi_new_device (struct device *dev,int index,struct i2c_board_info *info) {struct i2c_acpi_lookup lookup;struct i2c_adapter *adapter; +struct i2c_client *client;struct acpi_device *adev;LIST_HEAD (resource_list);int ret; adev =ACPI_COMPANION (dev);if (!adev) -return NULL ; +return ERR_PTR (-EINVAL );memset (&lookup,0 ,sizeof (lookup)); lookup.info = info;
@@ -408,16 +410,23 @@ struct i2c_client *i2c_acpi_new_device(struct device *dev, int index, ret =acpi_dev_get_resources (adev, &resource_list, i2c_acpi_fill_info, &lookup); +if (ret <0 ) +return ERR_PTR (ret); +acpi_dev_free_resource_list (&resource_list); -if (ret <0 || !info->addr) -return NULL ; +if (!info->addr) +return ERR_PTR (-EADDRNOTAVAIL ); adapter =i2c_acpi_find_adapter_by_handle (lookup.adapter_handle);if (!adapter) -return NULL ; +return ERR_PTR (-EPROBE_DEFER ); + + client =i2c_new_device (adapter, info); +if (!client) +return ERR_PTR (-ENODEV ); -return i2c_new_device (adapter, info); +return client; }EXPORT_SYMBOL_GPL (i2c_acpi_new_device);
Signature · 1 line
2.19.2
PATCH v4 6/15 platform/x86: intel_cht_int33fe: Get rid of obsolete conditional
In reply to Andy ShevchenkoNow, when i2c_acpi_new_device() never returns NULL, there is no point to check for it. Besides that, i2c_acpi_new_device() returns -EPROBE_DEFER directly and caller doesn't need to guess is better.
--- drivers/platform/x86/intel_cht_int33fe.c | 24 +++++------------------- 1 file changed, 5 insertions(+), 19 deletions(-)
drivers/platform/x86/intel_cht_int33fe.c +5 -19
@@ -169,13 +169,7 @@ static int cht_int33fe_probe(struct platform_device *pdev) board_info.properties = max17047_props; data->max17047 =i2c_acpi_new_device (dev,1 , &board_info);if (IS_ERR (data->max17047)) - ret =PTR_ERR (data->max17047); -else if (!data->max17047) - ret = -EPROBE_DEFER ;/* Wait for i2c-adapter to load */ -else - ret =0 ; -if (ret) -return ret; +return PTR_ERR (data->max17047); } data->connections[0 ].endpoint[0 ] ="port0" ;
@@ -200,28 +194,20 @@ static int cht_int33fe_probe(struct platform_device *pdev) board_info.irq = fusb302_irq; data->fusb302 =i2c_acpi_new_device (dev,2 , &board_info); -if (IS_ERR (data->fusb302)) +if (IS_ERR (data->fusb302)) { ret =PTR_ERR (data->fusb302); -else if (!data->fusb302) - ret = -EPROBE_DEFER ;/* Wait for the i2c-adapter to load */ -else - ret =0 ; -if (ret) goto out_unregister_max17047; + }memset (&board_info,0 ,sizeof (board_info)); board_info.dev_name ="pi3usb30532" ;strlcpy (board_info.type,"pi3usb30532" ,I2C_NAME_SIZE ); data->pi3usb30532 =i2c_acpi_new_device (dev,3 , &board_info); -if (IS_ERR (data->pi3usb30532)) +if (IS_ERR (data->pi3usb30532)) { ret =PTR_ERR (data->pi3usb30532); -else if (!data->pi3usb30532) - ret = -EPROBE_DEFER ;/* Wait for the i2c-adapter to load */ -else - ret =0 ; -if (ret) goto out_unregister_fusb302; + }platform_set_drvdata (pdev, data);
Signature · 1 line
2.19.2
PATCH v4 7/15 platform/x86: i2c-multi-instantiate: Get rid of obsolete conditional
In reply to Andy ShevchenkoNow, when i2c_acpi_new_device() never returns NULL, there is no point to check for it. Besides that, i2c_acpi_new_device() returns -EPROBE_DEFER directly and caller doesn't need to guess is better.
--- drivers/platform/x86/i2c-multi-instantiate.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)
drivers/platform/x86/i2c-multi-instantiate.c +3 -7
@@ -72,14 +72,10 @@ static int i2c_multi_inst_probe(struct platform_device *pdev) board_info.irq = ret; } multi->clients[i] =i2c_acpi_new_device (dev, i, &board_info); -if (IS_ERR (multi->clients[i])) +if (IS_ERR (multi->clients[i])) { ret =PTR_ERR (multi->clients[i]); -else if (!multi->clients[i]) - ret = -EPROBE_DEFER ;/* Wait for i2c-adapter to load */ -else - ret =0 ; -if (ret) { -dev_err (dev,"Error creating i2c-client, idx %d\n" , i); +if (ret != -EPROBE_DEFER ) +dev_err (dev,"Error creating i2c-client, idx %d\n" , i); goto error; } }
Signature · 1 line
2.19.2
PATCH v4 8/15 i2c: acpi: Use ACPI_FAILURE instead of !ACPI_SUCCESS
In reply to Andy ShevchenkoConvert to use ACPI_FAILURE instead of !ACPI_SUCCESS.
--- drivers/i2c/i2c-core-acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/i2c/i2c-core-acpi.c +1 -1
@@ -65,7 +65,7 @@ static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data) status =acpi_get_handle (lookup->device_handle, sb->resource_source.string_ptr, &lookup->adapter_handle); -if (!ACPI_SUCCESS (status)) +if (ACPI_FAILURE (status))return 1 ; info->addr = sb->slave_address;
Signature · 1 line
2.19.2
PATCH v4 9/15 i2c: acpi: Introduce i2c_acpi_get_i2c_resource() helper
In reply to Andy ShevchenkoBesides current two users one more is coming. Definitely makes sense to introduce a helper.
No functional change intended.
--- drivers/i2c/i2c-core-acpi.c | 41 ++++++++++++++++++++++++++----------- include/linux/acpi.h | 11 ++++++++++ 2 files changed, 40 insertions(+), 12 deletions(-)
drivers/i2c/i2c-core-acpi.c +29 -12
@@ -45,6 +45,33 @@ struct i2c_acpi_lookup {u32 min_speed; }; +/** +* i2c_acpi_get_i2c_resource - Gets I2cSerialBus resource if type matches +* @ares: ACPI resource +* @i2c: Pointer to I2cSerialBus resource will be returned here +* +* Checks if the given ACPI resource is of type I2cSerialBus. +* In this case, returns a pointer to it to the caller. +* +* Returns true if resource type is of I2cSerialBus, otherwise false. +*/ +bool i2c_acpi_get_i2c_resource (struct acpi_resource *ares, +struct acpi_resource_i2c_serialbus **i2c) +{ +struct acpi_resource_i2c_serialbus *sb; + +if (ares->type !=ACPI_RESOURCE_TYPE_SERIAL_BUS ) +return false; + + sb = &ares->data.i2c_serial_bus; +if (sb->type !=ACPI_RESOURCE_SERIAL_TYPE_I2C ) +return false; + + *i2c = sb; +return true; +} +EXPORT_SYMBOL_GPL (i2c_acpi_get_i2c_resource); +static int i2c_acpi_fill_info (struct acpi_resource *ares,void *data) {struct i2c_acpi_lookup *lookup = data;
@@ -52,11 +79,7 @@ static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data)struct acpi_resource_i2c_serialbus *sb;acpi_status status; -if (info->addr || ares->type !=ACPI_RESOURCE_TYPE_SERIAL_BUS ) -return 1 ; - - sb = &ares->data.i2c_serial_bus; -if (sb->type !=ACPI_RESOURCE_SERIAL_TYPE_I2C ) +if (info->addr || !i2c_acpi_get_i2c_resource (ares, &sb))return 1 ;if (lookup->index !=-1 && lookup->n++ != lookup->index)
@@ -534,13 +557,7 @@ i2c_acpi_space_handler(u32 function, acpi_physical_address command, goto err; } -if (!value64 || ares->type !=ACPI_RESOURCE_TYPE_SERIAL_BUS ) { - ret =AE_BAD_PARAMETER ; - goto err; - } - - sb = &ares->data.i2c_serial_bus; -if (sb->type !=ACPI_RESOURCE_SERIAL_TYPE_I2C ) { +if (!value64 || !i2c_acpi_get_i2c_resource (ares, &sb)) { ret =AE_BAD_PARAMETER ; goto err; }
include/linux/acpi.h +11 -0
@@ -1054,6 +1054,17 @@ static inline int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index) }#endif +#if defined(CONFIG_ACPI ) &&IS_ENABLED (CONFIG_I2C ) +bool i2c_acpi_get_i2c_resource (struct acpi_resource *ares, +struct acpi_resource_i2c_serialbus **i2c); +#else +static inline bool i2c_acpi_get_i2c_resource (struct acpi_resource *ares, +struct acpi_resource_i2c_serialbus **i2c) +{ +return false; +} +#endif +/* Device properties */ #ifdef CONFIG_ACPI
Signature · 1 line
2.19.2
PATCH v4 10/15 platform/x86: i2c-multi-instantiate: Count I2cSerialBus() resources
In reply to Andy ShevchenkoInstead of relying on hard coded and thus expected number of I2C clients, count the real amount provided by firmware.
This allows to support non-fixed amount of the slaves.
--- drivers/platform/x86/i2c-multi-instantiate.c | 41 ++++++++++++++++++-- 1 file changed, 37 insertions(+), 4 deletions(-)
drivers/platform/x86/i2c-multi-instantiate.c +37 -4
@@ -12,6 +12,7 @@#include <linux/kernel.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/types.h> struct i2c_inst_data {const char *type;
@@ -23,6 +24,31 @@ struct i2c_multi_inst_data {struct i2c_client *clients[0 ]; }; +static int i2c_multi_inst_count (struct acpi_resource *ares,void *data) +{ +struct acpi_resource_i2c_serialbus *sb; +int *count = data; + +if (i2c_acpi_get_i2c_resource (ares, &sb)) + *count = *count +1 ; + +return 1 ; +} + +static int i2c_multi_inst_count_resources (struct acpi_device *adev) +{ +LIST_HEAD (r); +int count =0 ; +int ret; + + ret =acpi_dev_get_resources (adev, &r, i2c_multi_inst_count, &count); +if (ret <0 ) +return ret; + +acpi_dev_free_resource_list (&r); +return count; +} +static int i2c_multi_inst_probe (struct platform_device *pdev) {struct i2c_multi_inst_data *multi;
@@ -44,17 +70,19 @@ static int i2c_multi_inst_probe(struct platform_device *pdev) adev =ACPI_COMPANION (dev);/* Count number of clients to instantiate */ -for (i =0 ; inst_data[i].type; i++) {} + ret =i2c_multi_inst_count_resources (adev); +if (ret <0 ) +return ret; multi =devm_kmalloc (dev, - offsetof(struct i2c_multi_inst_data, clients[i]), + offsetof(struct i2c_multi_inst_data, clients[ret]), GFP_KERNEL);if (!multi)return -ENOMEM ; - multi->num_clients = i; + multi->num_clients = ret; -for (i =0 ; i < multi->num_clients; i++) { +for (i =0 ; i < multi->num_clients && inst_data[i].type; i++) {memset (&board_info,0 ,sizeof (board_info));strlcpy (board_info.type, inst_data[i].type,I2C_NAME_SIZE ); snprintf(name, sizeof(name), "%s-%s", match->id,
@@ -79,6 +107,11 @@ static int i2c_multi_inst_probe(struct platform_device *pdev) goto error; } } +if (i < multi->num_clients) { +dev_err (dev,"Error finding driver, idx %d\n" , i); + ret = -ENODEV ; + goto error; + }platform_set_drvdata (pdev, multi);return 0 ;
Signature · 1 line
2.19.2
PATCH v4 11/15 platform/x86: i2c-multi-instantiate: Distinguish IRQ resource type
In reply to Andy ShevchenkoAs a preparatory patch switch the driver to distinguish IRQ resource type. For now, only GpioInt() is supported.
--- drivers/platform/x86/i2c-multi-instantiate.c | 27 +++++++++++++------- 1 file changed, 18 insertions(+), 9 deletions(-)
drivers/platform/x86/i2c-multi-instantiate.c +18 -9
@@ -7,6 +7,7 @@*/ #include <linux/acpi.h> +#include <linux/bits.h> #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/kernel.h>
@@ -14,9 +15,14 @@#include <linux/platform_device.h> #include <linux/types.h> +#define IRQ_RESOURCE_TYPE GENMASK(1, 0) +#define IRQ_RESOURCE_NONE 0 +#define IRQ_RESOURCE_GPIO 1 +struct i2c_inst_data {const char *type; -int gpio_irq_idx; +unsigned int flags; +int irq_idx; };struct i2c_multi_inst_data {
@@ -88,16 +94,19 @@ static int i2c_multi_inst_probe(struct platform_device *pdev)snprintf (name,sizeof (name),"%s-%s" , match->id, inst_data[i].type); board_info.dev_name = name; - board_info.irq =0 ; -if (inst_data[i].gpio_irq_idx !=-1 ) { - ret =acpi_dev_gpio_irq_get (adev, - inst_data[i].gpio_irq_idx); +switch (inst_data[i].flags &IRQ_RESOURCE_TYPE ) { +case IRQ_RESOURCE_GPIO : + ret =acpi_dev_gpio_irq_get (adev, inst_data[i].irq_idx);if (ret <0 ) {dev_err (dev,"Error requesting irq at index %d: %d\n" , - inst_data[i].gpio_irq_idx, ret); + inst_data[i].irq_idx, ret); goto error; } board_info.irq = ret; +break ; +default : + board_info.irq =0 ; +break ; } multi->clients[i] =i2c_acpi_new_device (dev, i, &board_info);if (IS_ERR (multi->clients[i])) {
@@ -135,9 +144,9 @@ static int i2c_multi_inst_remove(struct platform_device *pdev) }static const struct i2c_inst_data bsg1160_data[] = { - {"bmc150_accel" ,0 }, - {"bmc150_magn" ,-1 }, - {"bmg160" ,-1 }, + {"bmc150_accel" ,IRQ_RESOURCE_GPIO ,0 }, + {"bmc150_magn" }, + {"bmg160" }, {} };
Signature · 1 line
2.19.2
PATCH v4 12/15 platform/x86: i2c-multi-instantiate: Introduce IOAPIC IRQ support
In reply to Andy ShevchenkoIf ACPI table provides an Interrupt() resource we may consider to use it instead of GpioInt() one.
Here we leave an error condition, when getting IRQ resource, to the driver to decide how to proceed, because some drivers may consider IRQ resource optional.
--- drivers/platform/x86/i2c-multi-instantiate.c | 9 +++++++++ 1 file changed, 9 insertions(+)
drivers/platform/x86/i2c-multi-instantiate.c +9 -0
@@ -18,6 +18,7 @@#define IRQ_RESOURCE_TYPE GENMASK(1, 0)#define IRQ_RESOURCE_NONE 0#define IRQ_RESOURCE_GPIO 1 +#define IRQ_RESOURCE_APIC 2struct i2c_inst_data {const char *type;
@@ -104,6 +105,14 @@ static int i2c_multi_inst_probe(struct platform_device *pdev) } board_info.irq = ret;break ; +case IRQ_RESOURCE_APIC : + ret =platform_get_irq (pdev, inst_data[i].irq_idx); +if (ret <0 ) { +dev_dbg (dev,"Error requesting irq at index %d: %d\n" , + inst_data[i].irq_idx, ret); + } + board_info.irq = ret; +break ;default : board_info.irq =0 ;break ;
Signature · 1 line
2.19.2
PATCH v4 13/15 platform/x86: i2c-multi-instantiate: Allow to have same slaves
In reply to Andy ShevchenkoCurrently the driver will not enumerate the devices where I2C slaves are of the same type.
Add an instance number to make them unique.
--- drivers/platform/x86/i2c-multi-instantiate.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/platform/x86/i2c-multi-instantiate.c +2 -2
@@ -92,8 +92,8 @@ static int i2c_multi_inst_probe(struct platform_device *pdev)for (i =0 ; i < multi->num_clients && inst_data[i].type; i++) {memset (&board_info,0 ,sizeof (board_info));strlcpy (board_info.type, inst_data[i].type,I2C_NAME_SIZE ); -snprintf (name,sizeof (name),"%s-%s" , match->id, - inst_data[i].type); +snprintf (name,sizeof (name),"%s-%s.%d" , match->id, + inst_data[i].type, i); board_info.dev_name = name;switch (inst_data[i].flags &IRQ_RESOURCE_TYPE ) {case IRQ_RESOURCE_GPIO :
Signature · 1 line
2.19.2
PATCH v4 14/15 ACPI / scan: Create platform device for INT3515 ACPI nodes
In reply to Andy ShevchenkoThe ACPI device with INT3515 _HID is representing a complex USB PD hardware infrastructure which includes several I2C slave ICs.
We add an ID to the I2C multi instantiate list to enumerate all I2C slaves correctly.
--- drivers/acpi/scan.c | 1 + drivers/platform/x86/i2c-multi-instantiate.c | 9 +++++++++ drivers/usb/typec/tps6598x.c | 8 ++++---- 3 files changed, 14 insertions(+), 4 deletions(-)
drivers/acpi/scan.c +1 -0
@@ -1541,6 +1541,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)static const struct acpi_device_id i2c_multi_instantiate_ids[] = { {"BSG1160" , }, {"INT33FE" , }, + {"INT3515" , }, {} };
drivers/platform/x86/i2c-multi-instantiate.c +9 -0
@@ -159,12 +159,21 @@ static const struct i2c_inst_data bsg1160_data[] = { {} }; +static const struct i2c_inst_data int3515_data[] = { + {"tps6598x" ,IRQ_RESOURCE_APIC ,0 }, + {"tps6598x" ,IRQ_RESOURCE_APIC ,1 }, + {"tps6598x" ,IRQ_RESOURCE_APIC ,2 }, + {"tps6598x" ,IRQ_RESOURCE_APIC ,3 }, + {} +}; +/* * Note new device-ids must also be added to i2c_multi_instantiate_ids in * drivers/acpi/scan.c: acpi_device_enumeration_by_parent(). */ static const struct acpi_device_id i2c_multi_inst_acpi_ids[] = { {"BSG1160" , (unsigned long )bsg1160_data }, + {"INT3515" , (unsigned long )int3515_data }, { } };MODULE_DEVICE_TABLE (acpi, i2c_multi_inst_acpi_ids);
drivers/usb/typec/tps6598x.c +4 -4
@@ -501,19 +501,19 @@ static int tps6598x_remove(struct i2c_client *client)return 0 ; } -static const struct acpi_device_id tps6598x_acpi_match[] = { - {"INT3515" ,0 }, +static const struct i2c_device_id tps6598x_id[] = { + {"tps6598x" }, { } }; -MODULE_DEVICE_TABLE (acpi, tps6598x_acpi_match); +MODULE_DEVICE_TABLE (i2c, tps6598x_id);static struct i2c_driver tps6598x_i2c_driver = { .driver = { .name ="tps6598x" , - .acpi_match_table = tps6598x_acpi_match, }, .probe_new = tps6598x_probe, .remove = tps6598x_remove, + .id_table = tps6598x_id, };module_i2c_driver (tps6598x_i2c_driver);
Signature · 1 line
2.19.2
PATCH v4 15/15 iio: inv_mpu6050: Use i2c_acpi_get_i2c_resource() helper
In reply to Andy ShevchenkoACPI provides a generic helper to get I2C Serial Bus resources. Use it instead of open coded variant.
--- drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-)
drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c +6 -10
@@ -91,18 +91,14 @@ static int asus_acpi_get_sensor_info(struct acpi_device *adev,static int acpi_i2c_check_resource (struct acpi_resource *ares,void *data) { +struct acpi_resource_i2c_serialbus *sb;u32 *addr = data; -if (ares->type ==ACPI_RESOURCE_TYPE_SERIAL_BUS ) { -struct acpi_resource_i2c_serialbus *sb; - - sb = &ares->data.i2c_serial_bus; -if (sb->type ==ACPI_RESOURCE_SERIAL_TYPE_I2C ) { -if (*addr) - *addr |= (sb->slave_address <<16 ); -else - *addr = sb->slave_address; - } +if (i2c_acpi_get_i2c_resource (ares, &sb)) { +if (*addr) + *addr |= (sb->slave_address <<16 ); +else + *addr = sb->slave_address; }/* Tell the ACPI core that we already copied this address */
Signature · 1 line
2.19.2
Quoted 12 lines · Andy Shevchenko
Currently i2c-multi-instantiate driver does not support the case of INT3515 USB PD device, where:
-
Interrupt()is used instead ofGpioInt()
- All slaves may be the same from IP point of view
- There can be variadic amount of slavesThis series is addressing all above.
Note, series has been smoke tested (Heikki would do BAT or more) on Intel Coffee Lake system.
Quoted 8 lines
The idea is to push this either through PDx86 tree (needs Rafael's ACKs) or ACPI. In any case it needs tags from Heikki, Hans, Mika, Wolfram and Jonathan.
Testing and comments are warmly welcome.
In v4:
- directly return -EPROBE_DEFER fromi2c_acpi_new_device()
- due to above split error handling simplification to separate patches
Please, ignore this.
I messed up with the patches.
Quoted 45 lines
In v3:
- revisit error codes returned byi2c_acpi_new_device()(Hans, Mika)
- add documentation to exportedi2c_acpi_get_i2c_resource()(Mika)
- drop Hans' Rb tag in patch 5 due to changes
- append Mika's Ab tag to patch 6In v2:
- drop patches to copy fwnode and to handle BOSC0200 device
- append check for amount of devices listed in the driver's mapping
- add Rb tag given by HansAndy Shevchenko (15):
defconfig: enableI2C_DEBUG_CORE
platform/x86:intel_cht_int33fe: Remove duplicate NULL check platform/x86:intel_cht_int33fe: Accept errors ofi2c_acpi_new_device() platform/x86: i2c-multi-instantiate: Accept errors of i2c_acpi_new_device()i2c: acpi: Return error pointers from
i2c_acpi_new_device()platform/x86:intel_cht_int33fe: Get rid of obsolete conditional platform/x86: i2c-multi-instantiate: Get rid of obsolete conditional
i2c: acpi: UseACPI_FAILUREinstead of !ACPI_SUCCESS
i2c: acpi: Introducei2c_acpi_get_i2c_resource()helper platform/x86: i2c-multi-instantiate: CountI2cSerialBus()resources platform/x86: i2c-multi-instantiate: Distinguish IRQ resource type platform/x86: i2c-multi-instantiate: Introduce IOAPIC IRQ support platform/x86: i2c-multi-instantiate: Allow to have same slaves ACPI / scan: Create platform device for INT3515 ACPI nodes
iio:inv_mpu6050: Usei2c_acpi_get_i2c_resource()helperarch/x86/configs/i386_defconfig | 1 + arch/x86/configs/x86_64_defconfig | 1 + drivers/acpi/scan.c | 1 + drivers/i2c/i2c-core-acpi.c | 64 +++++++++---- drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c | 16 ++-- drivers/platform/x86/i2c-multi-instantiate.c | 97 ++++++++++++++++---- drivers/platform/x86/intel_cht_int33fe.c | 20 ++-- drivers/usb/typec/tps6598x.c | 8 +- include/linux/acpi.h | 11 +++ 9 files changed, 159 insertions(+), 60 deletions(-)--
2.19.2
Signature · 2 lines
With Best Regards, Andy Shevchenko