thermal: qoriq: add multiple sensors support
PATCH v3 1/1 thermal: qoriq: add multiple sensors support
From: Yuantian Tang <[email protected]>
The QorIQ Layerscape SoC has several thermal sensors but the current driver only supports one.
Massage the code to be sensor oriented and allow the support for multiple sensors.
---
v3:
- add Reviewed-by
v2:
- update the commit message
- refine the qoriq_tmu_register_tmu_zone()
drivers/thermal/qoriq_thermal.c | 100 ++++++++++++++++++--------------------- 1 files changed, 46 insertions(+), 54 deletions(-)
drivers/thermal/qoriq_thermal.c +46 -54
@@ -59,14 +59,21 @@ struct qoriq_tmu_regs {u32 ttr3cr;/* Temperature Range 3 Control Register */ }; +struct qoriq_tmu_data ; +/* * Thermal zone data */ +struct qoriq_sensor { +struct thermal_zone_device *tzd; +struct qoriq_tmu_data *qdata; +int id; +}; +struct qoriq_tmu_data { -struct thermal_zone_device *tz;struct qoriq_tmu_regs __iomem *regs; -int sensor_id;bool little_endian; +struct qoriq_sensor *sensor[SITES_MAX ]; };static void tmu_write (struct qoriq_tmu_data *p,u32 val,void __iomem *addr)
@@ -87,48 +94,51 @@ static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr)static int tmu_get_temp (void *p,int *temp) { +struct qoriq_sensor *qsensor = p; +struct qoriq_tmu_data *qdata = qsensor->qdata;u32 val; -struct qoriq_tmu_data *data = p; - val =tmu_read (data, &data->regs->site[data->sensor_id].tritsr); + val =tmu_read (qdata, &qdata->regs->site[qsensor->id].tritsr); *temp = (val &0xff ) *1000 ;return 0 ; } -static int qoriq_tmu_get_sensor_id (void ) +static const struct thermal_zone_of_device_ops tmu_tz_ops = { + .get_temp = tmu_get_temp, +}; + +static int qoriq_tmu_register_tmu_zone (struct platform_device *pdev) { -int ret, id; -struct of_phandle_args sensor_specs; -struct device_node *np, *sensor_np; +struct qoriq_tmu_data *qdata =platform_get_drvdata (pdev); +int id, sites =0 ; - np =of_find_node_by_name (NULL ,"thermal-zones" ); -if (!np) -return -ENODEV ; +for (id =0 ; id <SITES_MAX ; id++) { + qdata->sensor[id] =devm_kzalloc (&pdev->dev, +sizeof (struct qoriq_sensor ),GFP_KERNEL ); +if (!qdata->sensor[id]) +return -ENOMEM ; - sensor_np =of_get_next_child (np,NULL ); - ret =of_parse_phandle_with_args (sensor_np,"thermal-sensors" , -"#thermal-sensor-cells" , -0 , &sensor_specs); -if (ret) { -of_node_put (np); -of_node_put (sensor_np); -return ret; - } + qdata->sensor[id]->id = id; + qdata->sensor[id]->qdata = qdata; -if (sensor_specs.args_count >=1 ) { - id = sensor_specs.args[0 ]; -WARN (sensor_specs.args_count >1 , -"%s: too many cells in sensor specifier %d\n" , - sensor_specs.np->name, sensor_specs.args_count); - }else { - id =0 ; - } + qdata->sensor[id]->tzd =devm_thermal_zone_of_sensor_register ( + &pdev->dev, id, qdata->sensor[id], &tmu_tz_ops); +if (IS_ERR (qdata->sensor[id]->tzd)) { +if (PTR_ERR (qdata->sensor[id]->tzd) == -ENODEV ) +continue ; +else +return PTR_ERR (qdata->sensor[id]->tzd); -of_node_put (np); -of_node_put (sensor_np); + } + + sites |=0x1 << (15 - id); + } +/* Enable monitoring */ +if (sites !=0 ) +tmu_write (qdata, sites |TMR_ME |TMR_ALPF , &qdata->regs->tmr); -return id; +return 0 ; }static int qoriq_tmu_calibration (struct platform_device *pdev)
@@ -178,16 +188,11 @@ static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)tmu_write (data,TMR_DISABLE , &data->regs->tmr); } -static const struct thermal_zone_of_device_ops tmu_tz_ops = { - .get_temp = tmu_get_temp, -}; -static int qoriq_tmu_probe (struct platform_device *pdev) {int ret;struct qoriq_tmu_data *data;struct device_node *np = pdev->dev.of_node; -u32 site;if (!np) {dev_err (&pdev->dev,"Device OF-Node is NULL" );
@@ -203,13 +208,6 @@ static int qoriq_tmu_probe(struct platform_device *pdev) data->little_endian =of_property_read_bool (np,"little-endian" ); - data->sensor_id =qoriq_tmu_get_sensor_id (); -if (data->sensor_id <0 ) { -dev_err (&pdev->dev,"Failed to get sensor id\n" ); - ret = -ENODEV ; - goto err_iomap; - } - data->regs =of_iomap (np,0 );if (!data->regs) {dev_err (&pdev->dev,"Failed to get memory region\n" );
@@ -223,19 +221,13 @@ static int qoriq_tmu_probe(struct platform_device *pdev)if (ret <0 ) goto err_tmu; - data->tz =devm_thermal_zone_of_sensor_register (&pdev->dev, - data->sensor_id, - data, &tmu_tz_ops); -if (IS_ERR (data->tz)) { - ret =PTR_ERR (data->tz); -dev_err (&pdev->dev, -"Failed to register thermal zone device %d\n" , ret); - goto err_tmu; + ret =qoriq_tmu_register_tmu_zone (pdev); +if (ret <0 ) { +dev_err (&pdev->dev,"Failed to register sensors\n" ); + ret = -ENODEV ; + goto err_iomap; } -/* Enable monitoring */ - site =0x1 << (15 - data->sensor_id); -tmu_write (data, site |TMR_ME |TMR_ALPF , &data->regs->tmr);return 0 ;
Signature · 1 line
1.7.1
PING.
BR,
Andy
Quoted 198 lines
-----Original Message-----
From: [email protected] <[email protected]>
Sent: 2018年10月30日 9:00
To: [email protected]; [email protected]
Cc: [email protected]; [email protected]; [email protected]; Andy Tang <[email protected]>
Subject: [PATCH v3] thermal: qoriq: add multiple sensors supportFrom: Yuantian Tang <[email protected]>
The QorIQ Layerscape SoC has several thermal sensors but the current driver only supports one.
Massage the code to be sensor oriented and allow the support for multiple sensors.
Signed-off-by Yuantian Tang <[email protected]>Reviewed-by Daniel Lezcano <[email protected]>---
v3:
- add Reviewed-by
v2:
- update the commit message
- refine theqoriq_tmu_register_tmu_zone()drivers/thermal/qoriq_thermal.c | 100 ++++++++++++++++++--------------------- 1 files changed, 46 insertions(+), 54 deletions(-)(quoted diff) +0
-0
b/drivers/thermal/qoriq_thermal.cindex 450ed66..8beb344 100644drivers/thermal/qoriq_thermal.c +9
-2@@ -59,14 +59,21 @@ struct qoriq_tmu_regs {u32 ttr3cr;/* Temperature Range 3 Control Register */ }; +struct qoriq_tmu_data ; +/* * Thermal zone data */ +struct qoriq_sensor { +struct thermal_zone_device *tzd; +struct qoriq_tmu_data *qdata; +int id; +}; +struct qoriq_tmu_data { -struct thermal_zone_device *tz;struct qoriq_tmu_regs __iomem *regs; -int sensor_id;bool little_endian; +struct qoriq_sensor *sensor[SITES_MAX ]; }; static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomem*addr) @@ -87,48 +94,51 @@ static u32
tmu_read(struct qoriq_tmu_data *p, void __iomem *addr)static int
tmu_get_temp(void *p, int *temp){drivers/thermal/qoriq_thermal.c +18
-26+struct qoriq_sensor *qsensor = p; +struct qoriq_tmu_data *qdata = qsensor->qdata;u32 val; -struct qoriq_tmu_data *data = p; - val =tmu_read (data, &data->regs->site[data->sensor_id].tritsr); + val =tmu_read (qdata, &qdata->regs->site[qsensor->id].tritsr); *temp = (val &0xff ) *1000 ;return 0 ; } -static int qoriq_tmu_get_sensor_id (void ) +static const struct thermal_zone_of_device_ops tmu_tz_ops = { + .get_temp = tmu_get_temp, +}; + +static int qoriq_tmu_register_tmu_zone (struct platform_device *pdev) { -int ret, id; -struct of_phandle_args sensor_specs; -struct device_node *np, *sensor_np; +struct qoriq_tmu_data *qdata =platform_get_drvdata (pdev); +int id, sites =0 ; - np =of_find_node_by_name (NULL ,"thermal-zones" ); -if (!np) -return -ENODEV ; +for (id =0 ; id <SITES_MAX ; id++) { + qdata->sensor[id] =devm_kzalloc (&pdev->dev, +sizeof (struct qoriq_sensor ),GFP_KERNEL ); +if (!qdata->sensor[id]) +return -ENOMEM ; - sensor_np =of_get_next_child (np,NULL ); - ret =of_parse_phandle_with_args (sensor_np,"thermal-sensors" , -"#thermal-sensor-cells" , -0 , &sensor_specs); -if (ret) { -of_node_put (np); -of_node_put (sensor_np); -return ret; - } + qdata->sensor[id]->id = id; + qdata->sensor[id]->qdata = qdata; -if (sensor_specs.args_count >=1 ) { - id = sensor_specs.args[0 ]; -WARN (sensor_specs.args_count >1 , -"%s: too many cells in sensor specifier %d\n" , - sensor_specs.np->name, sensor_specs.args_count); - }else { - id =0 ; - } + qdata->sensor[id]->tzd =devm_thermal_zone_of_sensor_register(
drivers/thermal/qoriq_thermal.c +13
-2+ &pdev->dev, id, qdata->sensor[id], &tmu_tz_ops); +if (IS_ERR (qdata->sensor[id]->tzd)) { +if (PTR_ERR (qdata->sensor[id]->tzd) == -ENODEV ) +continue ; +else +return PTR_ERR (qdata->sensor[id]->tzd); -of_node_put (np); -of_node_put (sensor_np); + } + + sites |=0x1 << (15 - id); + } +/* Enable monitoring */ +if (sites !=0 ) + tmu_write(qdata, sites | TMR_ME | TMR_ALPF,
&qdata->regs->tmr);drivers/thermal/qoriq_thermal.c +1
-2-return id; +return 0 ; } static int qoriq_tmu_calibration(struct platform_device *pdev) @@ -178,16 +188,11 @@ static void qoriq_tmu_init_device(struct
qoriq_tmu_data*data)drivers/thermal/qoriq_thermal.c +1
-13tmu_write (data,TMR_DISABLE , &data->regs->tmr); } -static const struct thermal_zone_of_device_ops tmu_tz_ops = { - .get_temp = tmu_get_temp, -}; -static int qoriq_tmu_probe (struct platform_device *pdev) {int ret;struct qoriq_tmu_data *data;struct device_node *np = pdev->dev.of_node; -u32 site;if (!np) { dev_err(&pdev->dev, "Device OF-Node is NULL"); @@ -203,13 +208,6 @@ static int qoriq_tmu_probe(struct platform_device *pdev) data->little_endian = of_property_read_bool(np, "little-endian"); - data->sensor_id =qoriq_tmu_get_sensor_id (); -if (data->sensor_id <0 ) { -dev_err (&pdev->dev,"Failed to get sensor id\n" ); - ret = -ENODEV ; - goto err_iomap; - } - data->regs =of_iomap (np,0 );if (!data->regs) { dev_err(&pdev->dev, "Failed to get memory region\n"); @@ -223,19 +221,13 @@ static int qoriq_tmu_probe(struct platform_device*pdev)
drivers/thermal/qoriq_thermal.c +5
-12if (ret <0 ) goto err_tmu; - data->tz =devm_thermal_zone_of_sensor_register (&pdev->dev, - data->sensor_id, - data, &tmu_tz_ops); -if (IS_ERR (data->tz)) { - ret =PTR_ERR (data->tz); -dev_err (&pdev->dev, -"Failed to register thermal zone device %d\n" , ret); - goto err_tmu; + ret =qoriq_tmu_register_tmu_zone (pdev); +if (ret <0 ) { +dev_err (&pdev->dev,"Failed to register sensors\n" ); + ret = -ENODEV ; + goto err_iomap; } -/* Enable monitoring */ - site =0x1 << (15 - data->sensor_id); -tmu_write (data, site |TMR_ME |TMR_ALPF , &data->regs->tmr);return 0 ; --1.7.1
Hi all,
Do you have any comments on this patch?
I found for our thermal driver(qoriq_thermal.c) there are different between the following two git trees:git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
branch: nextgit://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git.
branch: next
Could you please clarify which git tree/branch should I use?
BR,
Andy
Quoted 212 lines
-----Original Message-----
From: Andy Tang
Sent: 2018年11月14日 15:29
To: [email protected]; [email protected]
Cc: [email protected]; [email protected]; [email protected]
Subject: RE: [PATCH v3] thermal: qoriq: add multiple sensors supportPING.
BR,
AndyQuoted 57 lines
-----Original Message-----
From: [email protected] <[email protected]>
Sent: 2018年10月30日 9:00
To: [email protected]; [email protected]
Cc: [email protected]; [email protected]; [email protected]; Andy Tang <[email protected]>
Subject: [PATCH v3] thermal: qoriq: add multiple sensors supportFrom: Yuantian Tang <[email protected]>
The QorIQ Layerscape SoC has several thermal sensors but the current driver only supports one.
Massage the code to be sensor oriented and allow the support for multiple sensors.
Signed-off-by Yuantian Tang <[email protected]>Reviewed-by Daniel Lezcano <[email protected]>---
v3:
- add Reviewed-by
v2:
- update the commit message
- refine theqoriq_tmu_register_tmu_zone()drivers/thermal/qoriq_thermal.c | 100 ++++++++++++++++++--------------------- 1 files changed, 46 insertions(+), 54 deletions(-)(quoted diff) +0
-0
b/drivers/thermal/qoriq_thermal.cindex 450ed66..8beb344 100644drivers/thermal/qoriq_thermal.c +9
-2@@ -59,14 +59,21 @@ struct qoriq_tmu_regs {u32 ttr3cr;/* Temperature Range 3 Control Register */ }; +struct qoriq_tmu_data ; +/* * Thermal zone data */ +struct qoriq_sensor { +struct thermal_zone_device *tzd; +struct qoriq_tmu_data *qdata; +int id; +}; +struct qoriq_tmu_data { -struct thermal_zone_device *tz;struct qoriq_tmu_regs __iomem *regs; -int sensor_id;bool little_endian; +struct qoriq_sensor *sensor[SITES_MAX ]; }; static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomemQuoted 1 line
*addr) @@ -87,48 +94,51 @@ static u32 tmu_read(struct
qoriq_tmu_dataQuoted 140 lines
*p, void
__iomem*addr)static int
tmu_get_temp(void *p, int *temp){drivers/thermal/qoriq_thermal.c +18
-26+struct qoriq_sensor *qsensor = p; +struct qoriq_tmu_data *qdata = qsensor->qdata;u32 val; -struct qoriq_tmu_data *data = p; - val =tmu_read (data, &data->regs->site[data->sensor_id].tritsr); + val =tmu_read (qdata, &qdata->regs->site[qsensor->id].tritsr); *temp = (val &0xff ) *1000 ;return 0 ; } -static int qoriq_tmu_get_sensor_id (void ) +static const struct thermal_zone_of_device_ops tmu_tz_ops = { + .get_temp = tmu_get_temp, +}; + +static int qoriq_tmu_register_tmu_zone (struct platform_device *pdev) { -int ret, id; -struct of_phandle_args sensor_specs; -struct device_node *np, *sensor_np; +struct qoriq_tmu_data *qdata =platform_get_drvdata (pdev); +int id, sites =0 ; - np =of_find_node_by_name (NULL ,"thermal-zones" ); -if (!np) -return -ENODEV ; +for (id =0 ; id <SITES_MAX ; id++) { + qdata->sensor[id] =devm_kzalloc (&pdev->dev, +sizeof (struct qoriq_sensor ),GFP_KERNEL ); +if (!qdata->sensor[id]) +return -ENOMEM ; - sensor_np =of_get_next_child (np,NULL ); - ret =of_parse_phandle_with_args (sensor_np,"thermal-sensors" , -"#thermal-sensor-cells" , -0 , &sensor_specs); -if (ret) { -of_node_put (np); -of_node_put (sensor_np); -return ret; - } + qdata->sensor[id]->id = id; + qdata->sensor[id]->qdata = qdata; -if (sensor_specs.args_count >=1 ) { - id = sensor_specs.args[0 ]; -WARN (sensor_specs.args_count >1 , -"%s: too many cells in sensor specifier %d\n" , - sensor_specs.np->name, sensor_specs.args_count); - }else { - id =0 ; - } + qdata->sensor[id]->tzd =devm_thermal_zone_of_sensor_register(
drivers/thermal/qoriq_thermal.c +13
-2+ &pdev->dev, id, qdata->sensor[id], &tmu_tz_ops); +if (IS_ERR (qdata->sensor[id]->tzd)) { +if (PTR_ERR (qdata->sensor[id]->tzd) == -ENODEV ) +continue ; +else +return PTR_ERR (qdata->sensor[id]->tzd); -of_node_put (np); -of_node_put (sensor_np); + } + + sites |=0x1 << (15 - id); + } +/* Enable monitoring */ +if (sites !=0 ) + tmu_write(qdata, sites | TMR_ME | TMR_ALPF,
&qdata->regs->tmr);drivers/thermal/qoriq_thermal.c +1
-2-return id; +return 0 ; } static int qoriq_tmu_calibration(struct platform_device *pdev) @@ -178,16 +188,11 @@ static void qoriq_tmu_init_device(struct
qoriq_tmu_data*data)drivers/thermal/qoriq_thermal.c +1
-13tmu_write (data,TMR_DISABLE , &data->regs->tmr); } -static const struct thermal_zone_of_device_ops tmu_tz_ops = { - .get_temp = tmu_get_temp, -}; -static int qoriq_tmu_probe (struct platform_device *pdev) {int ret;struct qoriq_tmu_data *data;struct device_node *np = pdev->dev.of_node; -u32 site;if (!np) { dev_err(&pdev->dev, "Device OF-Node is NULL"); @@ -203,13 +208,6 @@ static int qoriq_tmu_probe(struct platform_device *pdev) data->little_endian = of_property_read_bool(np, "little-endian"); - data->sensor_id =qoriq_tmu_get_sensor_id (); -if (data->sensor_id <0 ) { -dev_err (&pdev->dev,"Failed to get sensor id\n" ); - ret = -ENODEV ; - goto err_iomap; - } - data->regs =of_iomap (np,0 );if (!data->regs) { dev_err(&pdev->dev, "Failed to get memory region\n"); @@ -223,19 +221,13 @@ static int qoriq_tmu_probe(struct platform_device*pdev)
drivers/thermal/qoriq_thermal.c +5
-12if (ret <0 ) goto err_tmu; - data->tz =devm_thermal_zone_of_sensor_register (&pdev->dev, - data->sensor_id, - data, &tmu_tz_ops); -if (IS_ERR (data->tz)) { - ret =PTR_ERR (data->tz); -dev_err (&pdev->dev, -"Failed to register thermal zone device %d\n" , ret); - goto err_tmu; + ret =qoriq_tmu_register_tmu_zone (pdev); +if (ret <0 ) { +dev_err (&pdev->dev,"Failed to register sensors\n" ); + ret = -ENODEV ; + goto err_iomap; } -/* Enable monitoring */ - site =0x1 << (15 - data->sensor_id); -tmu_write (data, site |TMR_ME |TMR_ALPF , &data->regs->tmr);return 0 ; --1.7.1
Quoted 11 lines · Andy Tang
Hi all,
Do you have any comments on this patch?
I found for our thermal
driver(qoriq_thermal.c)there are different between the following two git trees:git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
branch: nextgit://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git.
branch: nextCould you please clarify which git tree/branch should I use?
SoC changes are submitted against linux-soc-thermal.git.
Generic thermal framework are sent against Zhang Rui's tree but it happens sometimes Eduardo pick them also when the changes are related to SoC behavior.
However, I agree that can be confusing :)
Eduardo, Rui,
how about to add a section in the maintainer handbook for the thermal to clarify the expectations and the flow?
Quoted 213 lines
Quoted 212 lines
-----Original Message-----
From: Andy Tang
Sent: 2018年11月14日 15:29
To: [email protected]; [email protected]
Cc: [email protected]; [email protected]; [email protected]
Subject: RE: [PATCH v3] thermal: qoriq: add multiple sensors supportPING.
BR,
AndyQuoted 57 lines
-----Original Message-----
From: [email protected] <[email protected]>
Sent: 2018年10月30日 9:00
To: [email protected]; [email protected]
Cc: [email protected]; [email protected]; [email protected]; Andy Tang <[email protected]>
Subject: [PATCH v3] thermal: qoriq: add multiple sensors supportFrom: Yuantian Tang <[email protected]>
The QorIQ Layerscape SoC has several thermal sensors but the current driver only supports one.
Massage the code to be sensor oriented and allow the support for multiple sensors.
Signed-off-by Yuantian Tang <[email protected]>Reviewed-by Daniel Lezcano <[email protected]>---
v3:
- add Reviewed-by
v2:
- update the commit message
- refine theqoriq_tmu_register_tmu_zone()drivers/thermal/qoriq_thermal.c | 100 ++++++++++++++++++--------------------- 1 files changed, 46 insertions(+), 54 deletions(-)(quoted diff) +0
-0
b/drivers/thermal/qoriq_thermal.cindex 450ed66..8beb344 100644drivers/thermal/qoriq_thermal.c +9
-2@@ -59,14 +59,21 @@ struct qoriq_tmu_regs {u32 ttr3cr;/* Temperature Range 3 Control Register */ }; +struct qoriq_tmu_data ; +/* * Thermal zone data */ +struct qoriq_sensor { +struct thermal_zone_device *tzd; +struct qoriq_tmu_data *qdata; +int id; +}; +struct qoriq_tmu_data { -struct thermal_zone_device *tz;struct qoriq_tmu_regs __iomem *regs; -int sensor_id;bool little_endian; +struct qoriq_sensor *sensor[SITES_MAX ]; }; static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomemQuoted 1 line
*addr) @@ -87,48 +94,51 @@ static u32 tmu_read(struct
qoriq_tmu_dataQuoted 140 lines
*p, void
__iomem*addr)static int
tmu_get_temp(void *p, int *temp){drivers/thermal/qoriq_thermal.c +18
-26+struct qoriq_sensor *qsensor = p; +struct qoriq_tmu_data *qdata = qsensor->qdata;u32 val; -struct qoriq_tmu_data *data = p; - val =tmu_read (data, &data->regs->site[data->sensor_id].tritsr); + val =tmu_read (qdata, &qdata->regs->site[qsensor->id].tritsr); *temp = (val &0xff ) *1000 ;return 0 ; } -static int qoriq_tmu_get_sensor_id (void ) +static const struct thermal_zone_of_device_ops tmu_tz_ops = { + .get_temp = tmu_get_temp, +}; + +static int qoriq_tmu_register_tmu_zone (struct platform_device *pdev) { -int ret, id; -struct of_phandle_args sensor_specs; -struct device_node *np, *sensor_np; +struct qoriq_tmu_data *qdata =platform_get_drvdata (pdev); +int id, sites =0 ; - np =of_find_node_by_name (NULL ,"thermal-zones" ); -if (!np) -return -ENODEV ; +for (id =0 ; id <SITES_MAX ; id++) { + qdata->sensor[id] =devm_kzalloc (&pdev->dev, +sizeof (struct qoriq_sensor ),GFP_KERNEL ); +if (!qdata->sensor[id]) +return -ENOMEM ; - sensor_np =of_get_next_child (np,NULL ); - ret =of_parse_phandle_with_args (sensor_np,"thermal-sensors" , -"#thermal-sensor-cells" , -0 , &sensor_specs); -if (ret) { -of_node_put (np); -of_node_put (sensor_np); -return ret; - } + qdata->sensor[id]->id = id; + qdata->sensor[id]->qdata = qdata; -if (sensor_specs.args_count >=1 ) { - id = sensor_specs.args[0 ]; -WARN (sensor_specs.args_count >1 , -"%s: too many cells in sensor specifier %d\n" , - sensor_specs.np->name, sensor_specs.args_count); - }else { - id =0 ; - } + qdata->sensor[id]->tzd =devm_thermal_zone_of_sensor_register(
drivers/thermal/qoriq_thermal.c +13
-2+ &pdev->dev, id, qdata->sensor[id], &tmu_tz_ops); +if (IS_ERR (qdata->sensor[id]->tzd)) { +if (PTR_ERR (qdata->sensor[id]->tzd) == -ENODEV ) +continue ; +else +return PTR_ERR (qdata->sensor[id]->tzd); -of_node_put (np); -of_node_put (sensor_np); + } + + sites |=0x1 << (15 - id); + } +/* Enable monitoring */ +if (sites !=0 ) + tmu_write(qdata, sites | TMR_ME | TMR_ALPF,
&qdata->regs->tmr);drivers/thermal/qoriq_thermal.c +1
-2-return id; +return 0 ; } static int qoriq_tmu_calibration(struct platform_device *pdev) @@ -178,16 +188,11 @@ static void qoriq_tmu_init_device(struct
qoriq_tmu_data*data)drivers/thermal/qoriq_thermal.c +1
-13tmu_write (data,TMR_DISABLE , &data->regs->tmr); } -static const struct thermal_zone_of_device_ops tmu_tz_ops = { - .get_temp = tmu_get_temp, -}; -static int qoriq_tmu_probe (struct platform_device *pdev) {int ret;struct qoriq_tmu_data *data;struct device_node *np = pdev->dev.of_node; -u32 site;if (!np) { dev_err(&pdev->dev, "Device OF-Node is NULL"); @@ -203,13 +208,6 @@ static int qoriq_tmu_probe(struct platform_device *pdev) data->little_endian = of_property_read_bool(np, "little-endian"); - data->sensor_id =qoriq_tmu_get_sensor_id (); -if (data->sensor_id <0 ) { -dev_err (&pdev->dev,"Failed to get sensor id\n" ); - ret = -ENODEV ; - goto err_iomap; - } - data->regs =of_iomap (np,0 );if (!data->regs) { dev_err(&pdev->dev, "Failed to get memory region\n"); @@ -223,19 +221,13 @@ static int qoriq_tmu_probe(struct platform_device*pdev)
drivers/thermal/qoriq_thermal.c +5
-12if (ret <0 ) goto err_tmu; - data->tz =devm_thermal_zone_of_sensor_register (&pdev->dev, - data->sensor_id, - data, &tmu_tz_ops); -if (IS_ERR (data->tz)) { - ret =PTR_ERR (data->tz); -dev_err (&pdev->dev, -"Failed to register thermal zone device %d\n" , ret); - goto err_tmu; + ret =qoriq_tmu_register_tmu_zone (pdev); +if (ret <0 ) { +dev_err (&pdev->dev,"Failed to register sensors\n" ); + ret = -ENODEV ; + goto err_iomap; } -/* Enable monitoring */ - site =0x1 << (15 - data->sensor_id); -tmu_write (data, site |TMR_ME |TMR_ALPF , &data->regs->tmr);return 0 ; --1.7.1
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Hi Daniel,
Thanks for your explanation. The problem is these two trees are not synced well. Let's take our driver(qoriq_thermal.c) for example.
Git log on Rui's tree next branch:
2dfef65 thermal: qoriq: Switch to SPDX identifier
1a893a5 thermal: qoriq: Simplify the 'site' variable assignment f1506a6 thermal: qoriq: Use devm_thermal_zone_of_sensor_register() c30d5d5 thermal: qoriq: constify thermal_zone_of_device_ops structures 0e77488 thermal: qoriq: remove useless call for of_thermal_get_trip_points() 4352844 thermal: qoriq: Add thermal management support
Git log on linux-soc-thermal tree branch next:
6017e2a thermal: qoriq: add i.mx8mq support
9b96566 thermal: Convert to using %pOFn instead of device_node.name c30d5d5 thermal: qoriq: constify thermal_zone_of_device_ops structures 0e77488 thermal: qoriq: remove useless call for of_thermal_get_trip_points() 4352844 thermal: qoriq: Add thermal management support
You can see that the first 2-3 commits on these two tress are different.
The strange thing is they seems sync well on Linus' tree:
0ef7791 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
6017e2a thermal: qoriq: add i.mx8mq support
9b96566 thermal: Convert to using %pOFn instead of device_node.name
2dfef65 thermal: qoriq: Switch to SPDX identifier
1a893a5 thermal: qoriq: Simplify the 'site' variable assignment
f1506a6 thermal: qoriq: Use devm_thermal_zone_of_sensor_register()
c30d5d5 thermal: qoriq: constify thermal_zone_of_device_ops structures
0e77488 thermal: qoriq: remove useless call for of_thermal_get_trip_points()
4352844 thermal: qoriq: Add thermal management support
Currently my patch was created based on Run's tree, probably I should rebase it to soc tree. But whichever tree I use, it can't be merged to Linus' tree without conflict.
Something I missed?
BR,
Andy
Quoted 289 lines
-----Original Message-----
From: Daniel Lezcano <[email protected]>
Sent: 2018年11月21日 16:44
To: Andy Tang <[email protected]>; [email protected]; [email protected]
Cc: [email protected]; [email protected]
Subject: Re: [PATCH v3] thermal: qoriq: add multiple sensors supportQuoted 5 lines · Andy Tang
Hi all,
Do you have any comments on this patch?
I found for our thermal
driver(qoriq_thermal.c)there are differentbetween the following two git trees:
Quoted 3 lines
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
branch: next
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.gi
t.Quoted 3 lines
branch: next
Could you please clarify which git tree/branch should I use?
SoC changes are submitted against linux-soc-thermal.git.
Generic thermal framework are sent against Zhang Rui's tree but it happens sometimes Eduardo pick them also when the changes are related to SoC behavior.
However, I agree that can be confusing :)
Eduardo, Rui,
how about to add a section in the maintainer handbook for the thermal to clarify the expectations and the flow?
Quoted 21 lines
Quoted 21 lines
-----Original Message-----
From: Andy Tang
Sent: 2018年11月14日 15:29
To: [email protected]; [email protected]
Cc: [email protected]; [email protected]; [email protected]
Subject: RE: [PATCH v3] thermal: qoriq: add multiple sensors supportPING.
BR,
AndyQuoted 8 lines
-----Original Message-----
From: [email protected] <[email protected]>
Sent: 2018年10月30日 9:00
To: [email protected]; [email protected]
Cc: [email protected]; [email protected]; [email protected]; Andy Tang <[email protected]>
Subject: [PATCH v3] thermal: qoriq: add multiple sensors supportQuoted 3 lines
Quoted 3 lines
Quoted 3 lines
From: Yuantian Tang <[email protected]>
The QorIQ Layerscape SoC has several thermal sensors but the
current
Quoted 87 lines
Quoted 87 lines
Quoted 46 lines
driver only supports one.
Massage the code to be sensor oriented and allow the support for multiple sensors.
Signed-off-by Yuantian Tang <[email protected]>Reviewed-by Daniel Lezcano <[email protected]>---
v3:
- add Reviewed-by
v2:
- update the commit message
- refine theqoriq_tmu_register_tmu_zone()drivers/thermal/qoriq_thermal.c | 100 ++++++++++++++++++--------------------- 1 files changed, 46 insertions(+), 54 deletions(-)(quoted diff) +0
-0
b/drivers/thermal/qoriq_thermal.cindex 450ed66..8beb344 100644drivers/thermal/qoriq_thermal.c +9
-2@@ -59,14 +59,21 @@ struct qoriq_tmu_regs {u32 ttr3cr;/* Temperature Range 3 Control Register */ }; +struct qoriq_tmu_data ; +/* * Thermal zone data */ +struct qoriq_sensor { +struct thermal_zone_device *tzd; +struct qoriq_tmu_data *qdata; +int id; +}; +struct qoriq_tmu_data { -struct thermal_zone_device *tz;struct qoriq_tmu_regs __iomem *regs; -int sensor_id;bool little_endian; +struct qoriq_sensor *sensor[SITES_MAX ]; }; static void tmu_write(struct qoriq_tmu_data *p, u32 val, voidQuoted 2 lines
__iomem
*addr) @@ -87,48 +94,51 @@ static u32 tmu_read(struct
qoriq_tmu_dataQuoted 38 lines
*p, void
__iomem*addr)static int
tmu_get_temp(void *p, int *temp){drivers/thermal/qoriq_thermal.c +16
-9+struct qoriq_sensor *qsensor = p; +struct qoriq_tmu_data *qdata = qsensor->qdata;u32 val; -struct qoriq_tmu_data *data = p; - val =tmu_read (data, &data->regs->site[data->sensor_id].tritsr); + val =tmu_read (qdata, &qdata->regs->site[qsensor->id].tritsr); *temp = (val &0xff ) *1000 ;return 0 ; } -static int qoriq_tmu_get_sensor_id (void ) +static const struct thermal_zone_of_device_ops tmu_tz_ops = { + .get_temp = tmu_get_temp, +}; + +static int qoriq_tmu_register_tmu_zone (struct platform_device +*pdev) { -int ret, id; -struct of_phandle_args sensor_specs; -struct device_node *np, *sensor_np; +struct qoriq_tmu_data *qdata =platform_get_drvdata (pdev); +int id, sites =0 ; - np =of_find_node_by_name (NULL ,"thermal-zones" ); -if (!np) -return -ENODEV ; +for (id =0 ; id <SITES_MAX ; id++) { + qdata->sensor[id] =devm_kzalloc (&pdev->dev, +sizeof (struct qoriq_sensor ),GFP_KERNEL ); +if (!qdata->sensor[id]) +return -ENOMEM ;Quoted 2 lines
Quoted 2 lines
drivers/thermal/qoriq_thermal.c
Quoted 2 lines
drivers/thermal/qoriq_thermal.c +0
-2- sensor_np =of_get_next_child (np,NULL ); - ret = of_parse_phandle_with_args(sensor_np,"thermal-sensors",
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
drivers/thermal/qoriq_thermal.c +2
-7-"#thermal-sensor-cells" , - 0, &sensor_specs); -if (ret) { -of_node_put (np); -of_node_put (sensor_np); -return ret; - } + qdata->sensor[id]->id = id; + qdata->sensor[id]->qdata = qdata;Quoted 5 lines
Quoted 5 lines
drivers/thermal/qoriq_thermal.c static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr)
Quoted 5 lines
drivers/thermal/qoriq_thermal.c +0
-5-if (sensor_specs.args_count >=1 ) { - id = sensor_specs.args[0 ]; - WARN(sensor_specs.args_count > 1, - "%s: too many cells in sensor specifier %d\n", - sensor_specs.np->name,sensor_specs.args_count);
Quoted 42 lines
Quoted 42 lines
Quoted 42 lines
drivers/thermal/qoriq_thermal.c +1
-3- }else { - id =0 ; - } + qdata->sensor[id]->tzd =devm_thermal_zone_of_sensor_register(
drivers/thermal/qoriq_thermal.c +13
-2+ &pdev->dev, id, qdata->sensor[id], &tmu_tz_ops); +if (IS_ERR (qdata->sensor[id]->tzd)) { +if (PTR_ERR (qdata->sensor[id]->tzd) == -ENODEV ) +continue ; +else +return PTR_ERR (qdata->sensor[id]->tzd); -of_node_put (np); -of_node_put (sensor_np); + } + + sites |=0x1 << (15 - id); + } +/* Enable monitoring */ +if (sites !=0 ) + tmu_write(qdata, sites | TMR_ME | TMR_ALPF,
&qdata->regs->tmr);drivers/thermal/qoriq_thermal.c +1
-2-return id; +return 0 ; } static int qoriq_tmu_calibration(struct platform_device *pdev) @@ -178,16 +188,11 @@ static void qoriq_tmu_init_device(struct
qoriq_tmu_data*data)drivers/thermal/qoriq_thermal.c +0
-5tmu_write (data,TMR_DISABLE , &data->regs->tmr); } -static const struct thermal_zone_of_device_ops tmu_tz_ops = { - .get_temp = tmu_get_temp, -}; -static int qoriq_tmu_probe (struct platform_device *pdev) {int ret;struct qoriq_tmu_data *data;struct device_node *np = pdev->dev.of_node; -u32 site;Quoted 2 lines
Quoted 2 lines
drivers/thermal/qoriq_thermal.c
Quoted 2 lines
drivers/thermal/qoriq_thermal.c +0
-0if (!np) { dev_err(&pdev->dev, "Device OF-Node is NULL"); @@-203,13
Quoted 1 line
Quoted 1 line
Quoted 1 line
+208,6 @@ static int qoriq_tmu_probe(struct
platform_device*pdev)
Quoted 13 lines
Quoted 13 lines
drivers/thermal/qoriq_thermal.c static int qoriq_tmu_probe(struct platform_device *pdev) · line 213
Quoted 13 lines
drivers/thermal/qoriq_thermal.c +0
-7data->little_endian =of_property_read_bool (np,"little-endian" ); - data->sensor_id =qoriq_tmu_get_sensor_id (); -if (data->sensor_id <0 ) { -dev_err (&pdev->dev,"Failed to get sensor id\n" ); - ret = -ENODEV ; - goto err_iomap; - } - data->regs =of_iomap (np,0 );if (!data->regs) {dev_err (&pdev->dev,"Failed to get memory region\n" );@@
Quoted 1 line
Quoted 1 line
Quoted 1 line
-223,19 +221,13 @@ static int qoriq_tmu_probe(struct
platform_deviceQuoted 19 lines
Quoted 19 lines
Quoted 19 lines
*pdev)
drivers/thermal/qoriq_thermal.c +5
-8if (ret <0 ) goto err_tmu; - data->tz =devm_thermal_zone_of_sensor_register (&pdev->dev, - data->sensor_id, - data, &tmu_tz_ops); -if (IS_ERR (data->tz)) { - ret =PTR_ERR (data->tz); -dev_err (&pdev->dev, -"Failed to register thermal zone device %d\n" , ret); - goto err_tmu; + ret =qoriq_tmu_register_tmu_zone (pdev); +if (ret <0 ) { +dev_err (&pdev->dev,"Failed to register sensors\n" ); + ret = -ENODEV ; + goto err_iomap; }Quoted 9 lines
Quoted 8 lines
Quoted 8 lines
drivers/thermal/qoriq_thermal.c +0
-4-/* Enable monitoring */ - site =0x1 << (15 - data->sensor_id); -tmu_write (data, site |TMR_ME |TMR_ALPF , &data->regs->tmr);return 0 ; --1.7.1
--
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2F
www.linaro.org%2F&data=02%7C01%7Candy.tang%40nxp.com%7Ca0 d265f95a424d33256b08d64f8d74c8%7C686ea1d3bc2b4c6fa92cd99c5c 301635%7C0%7C0%7C636783866299399290&sdata=AVw3XdjmiRO XP7Xz7MTNMVgzI8hYG9aWsR02opMZqjM%3D&reserved=0> Linaro.org │ Open source software for ARM SoCsFollow Linaro:
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2F
www.facebook.com%2Fpages%2FLinaro&data=02%7C01%7Candy.tan g%40nxp.com%7Ca0d265f95a424d33256b08d64f8d74c8%7C686ea1d3b c2b4c6fa92cd99c5c301635%7C0%7C0%7C636783866299399290&s data=NM8wm4ri%2F2kdBW0FdCSXrL5ogg6owPfoRGacqm%2BKsEw%3D&a mp;reserved=0> Facebook |
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Ft
witter.com%2F%23!%2Flinaroorg&data=02%7C01%7Candy.tang%40n xp.com%7Ca0d265f95a424d33256b08d64f8d74c8%7C686ea1d3bc2b4c6 fa92cd99c5c301635%7C0%7C0%7C636783866299399290&sdata= Wplqwpisgmqrf3yLhTzdo5O6TvN2Jfu5IjBTvS4xOWk%3D&reserved=0> Twitter |
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2F
www.linaro.org%2Flinaro-blog%2F&data=02%7C01%7Candy.tang%40 nxp.com%7Ca0d265f95a424d33256b08d64f8d74c8%7C686ea1d3bc2b4c 6fa92cd99c5c301635%7C0%7C0%7C636783866299399290&sdata=I b6KFIP3LNPGuDDb1dpnOllrqAAsc%2BZNCUuJZUPso6k%3D&reserve d=0> Blog
Quoted 33 lines · Andy Tang
Hi Daniel,
Thanks for your explanation. The problem is these two trees are not synced well. Let's take our
driver(qoriq_thermal.c)for example.Git log on Rui's tree next branch:
2dfef65 thermal: qoriq: Switch to SPDX identifier
1a893a5 thermal: qoriq: Simplify the 'site' variable assignment f1506a6 thermal: qoriq: Usedevm_thermal_zone_of_sensor_register()c30d5d5 thermal: qoriq: constifythermal_zone_of_device_opsstructures 0e77488 thermal: qoriq: remove useless call forof_thermal_get_trip_points()4352844 thermal: qoriq: Add thermal management supportGit log on linux-soc-thermal tree branch next:
6017e2a thermal: qoriq: add i.mx8mq support
9b96566 thermal: Convert to using %pOFn instead of device_node.name c30d5d5 thermal: qoriq: constifythermal_zone_of_device_opsstructures 0e77488 thermal: qoriq: remove useless call forof_thermal_get_trip_points()4352844 thermal: qoriq: Add thermal management supportYou can see that the first 2-3 commits on these two tress are different.
The strange thing is they seems sync well on Linus' tree:
0ef7791 Merge branch 'linus' ofgit://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
6017e2a thermal: qoriq: add i.mx8mq support
9b96566 thermal: Convert to using %pOFn instead of device_node.name
2dfef65 thermal: qoriq: Switch to SPDX identifier
1a893a5 thermal: qoriq: Simplify the 'site' variable assignment
f1506a6 thermal: qoriq: Usedevm_thermal_zone_of_sensor_register()
c30d5d5 thermal: qoriq: constifythermal_zone_of_device_opsstructures
0e77488 thermal: qoriq: remove useless call forof_thermal_get_trip_points()
4352844 thermal: qoriq: Add thermal management support
Quoted 4 lines
Currently my patch was created based on Run's tree, probably I should rebase it to soc tree. But whichever tree I use, it can't be merged to Linus' tree without conflict.
Something I missed?
No.
Eduardo, Rui,
why not create a 'thermal' group ala 'tip' group with a single tree and two branches:
thermal/next
thermal/fixes
- Rui takes the core changes.
- Eduardo takes the SoC changes.
- Both commit to thermal/next
- Both commit to thermal/fixes
- Both merge thermal/fixes into thermal/core as often as possible.
That will help to have a more up to date branch, simplify the patch submission path and reduce the latency for the merge windows.
If you need help, I can take care of applying the fixes only and merge them to thermal/next.
That is how the tip subsystem works, Peter Ziljstra, Ingo Molnar, Thomas Gleixner, have all permissions to commit in the tip tree but they take care of their subsystems. If one is away for vacations or whatever, someone else can take over during the absence.
Quoted 290 lines
Quoted 289 lines
-----Original Message-----
From: Daniel Lezcano <[email protected]>
Sent: 2018年11月21日 16:44
To: Andy Tang <[email protected]>; [email protected]; [email protected]
Cc: [email protected]; [email protected]
Subject: Re: [PATCH v3] thermal: qoriq: add multiple sensors supportQuoted 5 lines · Andy Tang
Hi all,
Do you have any comments on this patch?
I found for our thermal
driver(qoriq_thermal.c)there are differentbetween the following two git trees:
Quoted 3 lines
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
branch: next
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.gi
t.Quoted 3 lines
branch: next
Could you please clarify which git tree/branch should I use?
SoC changes are submitted against linux-soc-thermal.git.
Generic thermal framework are sent against Zhang Rui's tree but it happens sometimes Eduardo pick them also when the changes are related to SoC behavior.
However, I agree that can be confusing :)
Eduardo, Rui,
how about to add a section in the maintainer handbook for the thermal to clarify the expectations and the flow?
Quoted 21 lines
Quoted 21 lines
-----Original Message-----
From: Andy Tang
Sent: 2018年11月14日 15:29
To: [email protected]; [email protected]
Cc: [email protected]; [email protected]; [email protected]
Subject: RE: [PATCH v3] thermal: qoriq: add multiple sensors supportPING.
BR,
AndyQuoted 8 lines
-----Original Message-----
From: [email protected] <[email protected]>
Sent: 2018年10月30日 9:00
To: [email protected]; [email protected]
Cc: [email protected]; [email protected]; [email protected]; Andy Tang <[email protected]>
Subject: [PATCH v3] thermal: qoriq: add multiple sensors supportQuoted 3 lines
Quoted 3 lines
Quoted 3 lines
From: Yuantian Tang <[email protected]>
The QorIQ Layerscape SoC has several thermal sensors but the
current
Quoted 87 lines
Quoted 87 lines
Quoted 46 lines
driver only supports one.
Massage the code to be sensor oriented and allow the support for multiple sensors.
Signed-off-by Yuantian Tang <[email protected]>Reviewed-by Daniel Lezcano <[email protected]>---
v3:
- add Reviewed-by
v2:
- update the commit message
- refine theqoriq_tmu_register_tmu_zone()drivers/thermal/qoriq_thermal.c | 100 ++++++++++++++++++--------------------- 1 files changed, 46 insertions(+), 54 deletions(-)(quoted diff) +0
-0
b/drivers/thermal/qoriq_thermal.cindex 450ed66..8beb344 100644drivers/thermal/qoriq_thermal.c +9
-2@@ -59,14 +59,21 @@ struct qoriq_tmu_regs {u32 ttr3cr;/* Temperature Range 3 Control Register */ }; +struct qoriq_tmu_data ; +/* * Thermal zone data */ +struct qoriq_sensor { +struct thermal_zone_device *tzd; +struct qoriq_tmu_data *qdata; +int id; +}; +struct qoriq_tmu_data { -struct thermal_zone_device *tz;struct qoriq_tmu_regs __iomem *regs; -int sensor_id;bool little_endian; +struct qoriq_sensor *sensor[SITES_MAX ]; }; static void tmu_write(struct qoriq_tmu_data *p, u32 val, voidQuoted 2 lines
__iomem
*addr) @@ -87,48 +94,51 @@ static u32 tmu_read(struct
qoriq_tmu_dataQuoted 38 lines
*p, void
__iomem*addr)static int
tmu_get_temp(void *p, int *temp){drivers/thermal/qoriq_thermal.c +16
-9+struct qoriq_sensor *qsensor = p; +struct qoriq_tmu_data *qdata = qsensor->qdata;u32 val; -struct qoriq_tmu_data *data = p; - val =tmu_read (data, &data->regs->site[data->sensor_id].tritsr); + val =tmu_read (qdata, &qdata->regs->site[qsensor->id].tritsr); *temp = (val &0xff ) *1000 ;return 0 ; } -static int qoriq_tmu_get_sensor_id (void ) +static const struct thermal_zone_of_device_ops tmu_tz_ops = { + .get_temp = tmu_get_temp, +}; + +static int qoriq_tmu_register_tmu_zone (struct platform_device +*pdev) { -int ret, id; -struct of_phandle_args sensor_specs; -struct device_node *np, *sensor_np; +struct qoriq_tmu_data *qdata =platform_get_drvdata (pdev); +int id, sites =0 ; - np =of_find_node_by_name (NULL ,"thermal-zones" ); -if (!np) -return -ENODEV ; +for (id =0 ; id <SITES_MAX ; id++) { + qdata->sensor[id] =devm_kzalloc (&pdev->dev, +sizeof (struct qoriq_sensor ),GFP_KERNEL ); +if (!qdata->sensor[id]) +return -ENOMEM ;Quoted 2 lines
Quoted 2 lines
drivers/thermal/qoriq_thermal.c
Quoted 2 lines
drivers/thermal/qoriq_thermal.c +0
-2- sensor_np =of_get_next_child (np,NULL ); - ret = of_parse_phandle_with_args(sensor_np,"thermal-sensors",
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
drivers/thermal/qoriq_thermal.c +2
-7-"#thermal-sensor-cells" , - 0, &sensor_specs); -if (ret) { -of_node_put (np); -of_node_put (sensor_np); -return ret; - } + qdata->sensor[id]->id = id; + qdata->sensor[id]->qdata = qdata;Quoted 5 lines
Quoted 5 lines
drivers/thermal/qoriq_thermal.c static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr)
Quoted 5 lines
drivers/thermal/qoriq_thermal.c +0
-5-if (sensor_specs.args_count >=1 ) { - id = sensor_specs.args[0 ]; - WARN(sensor_specs.args_count > 1, - "%s: too many cells in sensor specifier %d\n", - sensor_specs.np->name,sensor_specs.args_count);
Quoted 42 lines
Quoted 42 lines
Quoted 42 lines
drivers/thermal/qoriq_thermal.c +1
-3- }else { - id =0 ; - } + qdata->sensor[id]->tzd =devm_thermal_zone_of_sensor_register(
drivers/thermal/qoriq_thermal.c +13
-2+ &pdev->dev, id, qdata->sensor[id], &tmu_tz_ops); +if (IS_ERR (qdata->sensor[id]->tzd)) { +if (PTR_ERR (qdata->sensor[id]->tzd) == -ENODEV ) +continue ; +else +return PTR_ERR (qdata->sensor[id]->tzd); -of_node_put (np); -of_node_put (sensor_np); + } + + sites |=0x1 << (15 - id); + } +/* Enable monitoring */ +if (sites !=0 ) + tmu_write(qdata, sites | TMR_ME | TMR_ALPF,
&qdata->regs->tmr);drivers/thermal/qoriq_thermal.c +1
-2-return id; +return 0 ; } static int qoriq_tmu_calibration(struct platform_device *pdev) @@ -178,16 +188,11 @@ static void qoriq_tmu_init_device(struct
qoriq_tmu_data*data)drivers/thermal/qoriq_thermal.c +0
-5tmu_write (data,TMR_DISABLE , &data->regs->tmr); } -static const struct thermal_zone_of_device_ops tmu_tz_ops = { - .get_temp = tmu_get_temp, -}; -static int qoriq_tmu_probe (struct platform_device *pdev) {int ret;struct qoriq_tmu_data *data;struct device_node *np = pdev->dev.of_node; -u32 site;Quoted 2 lines
Quoted 2 lines
drivers/thermal/qoriq_thermal.c
Quoted 2 lines
drivers/thermal/qoriq_thermal.c +0
-0if (!np) { dev_err(&pdev->dev, "Device OF-Node is NULL"); @@-203,13
Quoted 1 line
Quoted 1 line
Quoted 1 line
+208,6 @@ static int qoriq_tmu_probe(struct
platform_device*pdev)
Quoted 13 lines
Quoted 13 lines
drivers/thermal/qoriq_thermal.c static int qoriq_tmu_probe(struct platform_device *pdev) · line 213
Quoted 13 lines
drivers/thermal/qoriq_thermal.c +0
-7data->little_endian =of_property_read_bool (np,"little-endian" ); - data->sensor_id =qoriq_tmu_get_sensor_id (); -if (data->sensor_id <0 ) { -dev_err (&pdev->dev,"Failed to get sensor id\n" ); - ret = -ENODEV ; - goto err_iomap; - } - data->regs =of_iomap (np,0 );if (!data->regs) {dev_err (&pdev->dev,"Failed to get memory region\n" );@@
Quoted 1 line
Quoted 1 line
Quoted 1 line
-223,19 +221,13 @@ static int qoriq_tmu_probe(struct
platform_deviceQuoted 19 lines
Quoted 19 lines
Quoted 19 lines
*pdev)
drivers/thermal/qoriq_thermal.c +5
-8if (ret <0 ) goto err_tmu; - data->tz =devm_thermal_zone_of_sensor_register (&pdev->dev, - data->sensor_id, - data, &tmu_tz_ops); -if (IS_ERR (data->tz)) { - ret =PTR_ERR (data->tz); -dev_err (&pdev->dev, -"Failed to register thermal zone device %d\n" , ret); - goto err_tmu; + ret =qoriq_tmu_register_tmu_zone (pdev); +if (ret <0 ) { +dev_err (&pdev->dev,"Failed to register sensors\n" ); + ret = -ENODEV ; + goto err_iomap; }Quoted 9 lines
Quoted 8 lines
Quoted 8 lines
drivers/thermal/qoriq_thermal.c +0
-4-/* Enable monitoring */ - site =0x1 << (15 - data->sensor_id); -tmu_write (data, site |TMR_ME |TMR_ALPF , &data->regs->tmr);return 0 ; --1.7.1
--
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2F
www.linaro.org%2F&data=02%7C01%7Candy.tang%40nxp.com%7Ca0 d265f95a424d33256b08d64f8d74c8%7C686ea1d3bc2b4c6fa92cd99c5c 301635%7C0%7C0%7C636783866299399290&sdata=AVw3XdjmiRO XP7Xz7MTNMVgzI8hYG9aWsR02opMZqjM%3D&reserved=0> Linaro.org │ Open source software for ARM SoCsFollow Linaro:
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2F
www.facebook.com%2Fpages%2FLinaro&data=02%7C01%7Candy.tan g%40nxp.com%7Ca0d265f95a424d33256b08d64f8d74c8%7C686ea1d3b c2b4c6fa92cd99c5c301635%7C0%7C0%7C636783866299399290&s data=NM8wm4ri%2F2kdBW0FdCSXrL5ogg6owPfoRGacqm%2BKsEw%3D&a mp;reserved=0> Facebook |
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Ft
witter.com%2F%23!%2Flinaroorg&data=02%7C01%7Candy.tang%40n xp.com%7Ca0d265f95a424d33256b08d64f8d74c8%7C686ea1d3bc2b4c6 fa92cd99c5c301635%7C0%7C0%7C636783866299399290&sdata= Wplqwpisgmqrf3yLhTzdo5O6TvN2Jfu5IjBTvS4xOWk%3D&reserved=0> Twitter |
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2F
www.linaro.org%2Flinaro-blog%2F&data=02%7C01%7Candy.tang%40 nxp.com%7Ca0d265f95a424d33256b08d64f8d74c8%7C686ea1d3bc2b4c 6fa92cd99c5c301635%7C0%7C0%7C636783866299399290&sdata=I b6KFIP3LNPGuDDb1dpnOllrqAAsc%2BZNCUuJZUPso6k%3D&reserve d=0> Blog
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Quoted 59 lines · Daniel Lezcano
Quoted 33 lines · Andy Tang
Hi Daniel,
Thanks for your explanation. The problem is these two trees are not synced well. Let's take our
driver(qoriq_thermal.c)for example.Git log on Rui's tree next branch:
2dfef65 thermal: qoriq: Switch to SPDX identifier
1a893a5 thermal: qoriq: Simplify the 'site' variable assignment f1506a6 thermal: qoriq: Usedevm_thermal_zone_of_sensor_register()c30d5d5 thermal: qoriq: constifythermal_zone_of_device_opsstructures 0e77488 thermal: qoriq: remove useless call forof_thermal_get_trip_points()4352844 thermal: qoriq: Add thermal management supportGit log on linux-soc-thermal tree branch next:
6017e2a thermal: qoriq: add i.mx8mq support
9b96566 thermal: Convert to using %pOFn instead of device_node.name c30d5d5 thermal: qoriq: constifythermal_zone_of_device_opsstructures 0e77488 thermal: qoriq: remove useless call forof_thermal_get_trip_points()4352844 thermal: qoriq: Add thermal management supportYou can see that the first 2-3 commits on these two tress are different.
The strange thing is they seems sync well on Linus' tree:
0ef7791 Merge branch 'linus' ofgit://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
6017e2a thermal: qoriq: add i.mx8mq support
9b96566 thermal: Convert to using %pOFn instead of device_node.name
2dfef65 thermal: qoriq: Switch to SPDX identifier
1a893a5 thermal: qoriq: Simplify the 'site' variable assignment
f1506a6 thermal: qoriq: Usedevm_thermal_zone_of_sensor_register()
c30d5d5 thermal: qoriq: constifythermal_zone_of_device_opsstructures
0e77488 thermal: qoriq: remove useless call forof_thermal_get_trip_points()
4352844 thermal: qoriq: Add thermal management supportQuoted 4 lines
Currently my patch was created based on Run's tree, probably I should rebase it to soc tree. But whichever tree I use, it can't be merged to Linus' tree without conflict.
Something I missed?
No.
Eduardo, Rui,
why not create a 'thermal' group ala 'tip' group with a single tree and two branches:
thermal/next
thermal/fixes- Rui takes the core changes.
- Eduardo takes the SoC changes.- Both commit to thermal/next
- Both commit to thermal/fixes
- Both merge thermal/fixes into thermal/core as often as possible.That will help to have a more up to date branch, simplify the patch submission path and reduce the latency for the merge windows.
Quoted 8 lines
If you need help, I can take care of applying the fixes only and merge them to thermal/next.
That is how the tip subsystem works, Peter Ziljstra, Ingo Molnar, Thomas Gleixner, have all permissions to commit in the tip tree but they take care of their subsystems. If one is away for vacations or whatever, someone else can take over during the absence.
Yeah, that is a setup people have been following. It does not necessarily mean it will work for all cases though.
I believe regardless of process and tree setup what we are lacking here is a documentation of how things are being done.
As I mentioned, I will work on writing something up to document at least what we have today before any change in process gets in place.
Quoted 303 lines
Quoted 294 lines
Quoted 293 lines
-----Original Message-----
From: Daniel Lezcano <[email protected]>
Sent: 2018年11月21日 16:44
To: Andy Tang <[email protected]>; [email protected]; [email protected]
Cc: [email protected]; [email protected]
Subject: Re: [PATCH v3] thermal: qoriq: add multiple sensors supportQuoted 5 lines · Andy Tang
Hi all,
Do you have any comments on this patch?
I found for our thermal
driver(qoriq_thermal.c)there are differentbetween the following two git trees:
Quoted 3 lines
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
branch: next
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.gi
t.Quoted 3 lines
branch: next
Could you please clarify which git tree/branch should I use?
SoC changes are submitted against linux-soc-thermal.git.
Generic thermal framework are sent against Zhang Rui's tree but it happens sometimes Eduardo pick them also when the changes are related to SoC behavior.
However, I agree that can be confusing :)
Eduardo, Rui,
how about to add a section in the maintainer handbook for the thermal to clarify the expectations and the flow?
Quoted 21 lines
Quoted 21 lines
-----Original Message-----
From: Andy Tang
Sent: 2018年11月14日 15:29
To: [email protected]; [email protected]
Cc: [email protected]; [email protected]; [email protected]
Subject: RE: [PATCH v3] thermal: qoriq: add multiple sensors supportPING.
BR,
AndyQuoted 8 lines
-----Original Message-----
From: [email protected] <[email protected]>
Sent: 2018年10月30日 9:00
To: [email protected]; [email protected]
Cc: [email protected]; [email protected]; [email protected]; Andy Tang <[email protected]>
Subject: [PATCH v3] thermal: qoriq: add multiple sensors supportQuoted 3 lines
Quoted 3 lines
Quoted 3 lines
From: Yuantian Tang <[email protected]>
The QorIQ Layerscape SoC has several thermal sensors but the
current
Quoted 87 lines
Quoted 87 lines
Quoted 46 lines
driver only supports one.
Massage the code to be sensor oriented and allow the support for multiple sensors.
Signed-off-by Yuantian Tang <[email protected]>Reviewed-by Daniel Lezcano <[email protected]>---
v3:
- add Reviewed-by
v2:
- update the commit message
- refine theqoriq_tmu_register_tmu_zone()drivers/thermal/qoriq_thermal.c | 100 ++++++++++++++++++--------------------- 1 files changed, 46 insertions(+), 54 deletions(-)(quoted diff) +0
-0
b/drivers/thermal/qoriq_thermal.cindex 450ed66..8beb344 100644drivers/thermal/qoriq_thermal.c +9
-2@@ -59,14 +59,21 @@ struct qoriq_tmu_regs {u32 ttr3cr;/* Temperature Range 3 Control Register */ }; +struct qoriq_tmu_data ; +/* * Thermal zone data */ +struct qoriq_sensor { +struct thermal_zone_device *tzd; +struct qoriq_tmu_data *qdata; +int id; +}; +struct qoriq_tmu_data { -struct thermal_zone_device *tz;struct qoriq_tmu_regs __iomem *regs; -int sensor_id;bool little_endian; +struct qoriq_sensor *sensor[SITES_MAX ]; }; static void tmu_write(struct qoriq_tmu_data *p, u32 val, voidQuoted 2 lines
__iomem
*addr) @@ -87,48 +94,51 @@ static u32 tmu_read(struct
qoriq_tmu_dataQuoted 38 lines
*p, void
__iomem*addr)static int
tmu_get_temp(void *p, int *temp){drivers/thermal/qoriq_thermal.c +16
-9+struct qoriq_sensor *qsensor = p; +struct qoriq_tmu_data *qdata = qsensor->qdata;u32 val; -struct qoriq_tmu_data *data = p; - val =tmu_read (data, &data->regs->site[data->sensor_id].tritsr); + val =tmu_read (qdata, &qdata->regs->site[qsensor->id].tritsr); *temp = (val &0xff ) *1000 ;return 0 ; } -static int qoriq_tmu_get_sensor_id (void ) +static const struct thermal_zone_of_device_ops tmu_tz_ops = { + .get_temp = tmu_get_temp, +}; + +static int qoriq_tmu_register_tmu_zone (struct platform_device +*pdev) { -int ret, id; -struct of_phandle_args sensor_specs; -struct device_node *np, *sensor_np; +struct qoriq_tmu_data *qdata =platform_get_drvdata (pdev); +int id, sites =0 ; - np =of_find_node_by_name (NULL ,"thermal-zones" ); -if (!np) -return -ENODEV ; +for (id =0 ; id <SITES_MAX ; id++) { + qdata->sensor[id] =devm_kzalloc (&pdev->dev, +sizeof (struct qoriq_sensor ),GFP_KERNEL ); +if (!qdata->sensor[id]) +return -ENOMEM ;Quoted 2 lines
Quoted 2 lines
drivers/thermal/qoriq_thermal.c
Quoted 2 lines
drivers/thermal/qoriq_thermal.c +0
-2- sensor_np =of_get_next_child (np,NULL ); - ret = of_parse_phandle_with_args(sensor_np,"thermal-sensors",
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
drivers/thermal/qoriq_thermal.c +2
-7-"#thermal-sensor-cells" , - 0, &sensor_specs); -if (ret) { -of_node_put (np); -of_node_put (sensor_np); -return ret; - } + qdata->sensor[id]->id = id; + qdata->sensor[id]->qdata = qdata;Quoted 5 lines
Quoted 5 lines
drivers/thermal/qoriq_thermal.c static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr)
Quoted 5 lines
drivers/thermal/qoriq_thermal.c +0
-5-if (sensor_specs.args_count >=1 ) { - id = sensor_specs.args[0 ]; - WARN(sensor_specs.args_count > 1, - "%s: too many cells in sensor specifier %d\n", - sensor_specs.np->name,sensor_specs.args_count);
Quoted 42 lines
Quoted 42 lines
Quoted 42 lines
drivers/thermal/qoriq_thermal.c +1
-3- }else { - id =0 ; - } + qdata->sensor[id]->tzd =devm_thermal_zone_of_sensor_register(
drivers/thermal/qoriq_thermal.c +13
-2+ &pdev->dev, id, qdata->sensor[id], &tmu_tz_ops); +if (IS_ERR (qdata->sensor[id]->tzd)) { +if (PTR_ERR (qdata->sensor[id]->tzd) == -ENODEV ) +continue ; +else +return PTR_ERR (qdata->sensor[id]->tzd); -of_node_put (np); -of_node_put (sensor_np); + } + + sites |=0x1 << (15 - id); + } +/* Enable monitoring */ +if (sites !=0 ) + tmu_write(qdata, sites | TMR_ME | TMR_ALPF,
&qdata->regs->tmr);drivers/thermal/qoriq_thermal.c +1
-2-return id; +return 0 ; } static int qoriq_tmu_calibration(struct platform_device *pdev) @@ -178,16 +188,11 @@ static void qoriq_tmu_init_device(struct
qoriq_tmu_data*data)drivers/thermal/qoriq_thermal.c +0
-5tmu_write (data,TMR_DISABLE , &data->regs->tmr); } -static const struct thermal_zone_of_device_ops tmu_tz_ops = { - .get_temp = tmu_get_temp, -}; -static int qoriq_tmu_probe (struct platform_device *pdev) {int ret;struct qoriq_tmu_data *data;struct device_node *np = pdev->dev.of_node; -u32 site;Quoted 2 lines
Quoted 2 lines
drivers/thermal/qoriq_thermal.c
Quoted 2 lines
drivers/thermal/qoriq_thermal.c +0
-0if (!np) { dev_err(&pdev->dev, "Device OF-Node is NULL"); @@-203,13
Quoted 1 line
Quoted 1 line
Quoted 1 line
+208,6 @@ static int qoriq_tmu_probe(struct
platform_device*pdev)
Quoted 13 lines
Quoted 13 lines
drivers/thermal/qoriq_thermal.c static int qoriq_tmu_probe(struct platform_device *pdev) · line 213
Quoted 13 lines
drivers/thermal/qoriq_thermal.c +0
-7data->little_endian =of_property_read_bool (np,"little-endian" ); - data->sensor_id =qoriq_tmu_get_sensor_id (); -if (data->sensor_id <0 ) { -dev_err (&pdev->dev,"Failed to get sensor id\n" ); - ret = -ENODEV ; - goto err_iomap; - } - data->regs =of_iomap (np,0 );if (!data->regs) {dev_err (&pdev->dev,"Failed to get memory region\n" );@@
Quoted 1 line
Quoted 1 line
Quoted 1 line
-223,19 +221,13 @@ static int qoriq_tmu_probe(struct
platform_deviceQuoted 19 lines
Quoted 19 lines
Quoted 19 lines
*pdev)
drivers/thermal/qoriq_thermal.c +5
-8if (ret <0 ) goto err_tmu; - data->tz =devm_thermal_zone_of_sensor_register (&pdev->dev, - data->sensor_id, - data, &tmu_tz_ops); -if (IS_ERR (data->tz)) { - ret =PTR_ERR (data->tz); -dev_err (&pdev->dev, -"Failed to register thermal zone device %d\n" , ret); - goto err_tmu; + ret =qoriq_tmu_register_tmu_zone (pdev); +if (ret <0 ) { +dev_err (&pdev->dev,"Failed to register sensors\n" ); + ret = -ENODEV ; + goto err_iomap; }Quoted 9 lines
Quoted 8 lines
Quoted 8 lines
drivers/thermal/qoriq_thermal.c +0
-4-/* Enable monitoring */ - site =0x1 << (15 - data->sensor_id); -tmu_write (data, site |TMR_ME |TMR_ALPF , &data->regs->tmr);return 0 ; --1.7.1
--
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2F
www.linaro.org%2F&data=02%7C01%7Candy.tang%40nxp.com%7Ca0 d265f95a424d33256b08d64f8d74c8%7C686ea1d3bc2b4c6fa92cd99c5c 301635%7C0%7C0%7C636783866299399290&sdata=AVw3XdjmiRO XP7Xz7MTNMVgzI8hYG9aWsR02opMZqjM%3D&reserved=0> Linaro.org │ Open source software for ARM SoCsFollow Linaro:
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2F
www.facebook.com%2Fpages%2FLinaro&data=02%7C01%7Candy.tan g%40nxp.com%7Ca0d265f95a424d33256b08d64f8d74c8%7C686ea1d3b c2b4c6fa92cd99c5c301635%7C0%7C0%7C636783866299399290&s data=NM8wm4ri%2F2kdBW0FdCSXrL5ogg6owPfoRGacqm%2BKsEw%3D&a mp;reserved=0> Facebook |
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Ft
witter.com%2F%23!%2Flinaroorg&data=02%7C01%7Candy.tang%40n xp.com%7Ca0d265f95a424d33256b08d64f8d74c8%7C686ea1d3bc2b4c6 fa92cd99c5c301635%7C0%7C0%7C636783866299399290&sdata= Wplqwpisgmqrf3yLhTzdo5O6TvN2Jfu5IjBTvS4xOWk%3D&reserved=0> Twitter |
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2F
www.linaro.org%2Flinaro-blog%2F&data=02%7C01%7Candy.tang%40 nxp.com%7Ca0d265f95a424d33256b08d64f8d74c8%7C686ea1d3bc2b4c 6fa92cd99c5c301635%7C0%7C0%7C636783866299399290&sdata=I b6KFIP3LNPGuDDb1dpnOllrqAAsc%2BZNCUuJZUPso6k%3D&reserve d=0> BlogSignature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Quoted 88 lines
-----Original Message-----
From: Eduardo Valentin <[email protected]>
Sent: 2018年11月30日 1:21
To: Daniel Lezcano <[email protected]>
Cc: Andy Tang <[email protected]>; [email protected]; [email protected]; [email protected]
Subject: Re: [PATCH v3] thermal: qoriq: add multiple sensors supportQuoted 4 lines · Daniel Lezcano
Quoted 3 lines · Andy Tang
Hi Daniel,
Thanks for your explanation. The problem is these two trees are not synced
well.
Quoted 37 lines
Quoted 37 lines
Let's take our
driver(qoriq_thermal.c)for example.Git log on Rui's tree next branch:
2dfef65 thermal: qoriq: Switch to SPDX identifier 1a893a5 thermal: qoriq: Simplify the 'site' variable assignment f1506a6 thermal: qoriq: Usedevm_thermal_zone_of_sensor_register()c30d5d5 thermal: qoriq: constifythermal_zone_of_device_opsstructures
0e77488 thermal: qoriq: remove useless call forof_thermal_get_trip_points()
4352844 thermal: qoriq: Add thermal management supportGit log on linux-soc-thermal tree branch next:
6017e2a thermal: qoriq: add i.mx8mq support
9b96566 thermal: Convert to using %pOFn instead of device_node.name c30d5d5 thermal: qoriq: constifythermal_zone_of_device_opsstructures
0e77488 thermal: qoriq: remove useless call forof_thermal_get_trip_points()
4352844 thermal: qoriq: Add thermal management supportYou can see that the first 2-3 commits on these two tress are different.
The strange thing is they seems sync well on Linus' tree:
0ef7791 Merge branch 'linus' ofgit://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-the
rmal 6017e2a thermal: qoriq: add i.mx8mq support
9b96566 thermal: Convert to using %pOFn instead of device_node.name 2dfef65 thermal: qoriq: Switch to SPDX identifier 1a893a5 thermal: qoriq: Simplify the 'site' variable assignment f1506a6 thermal: qoriq: Usedevm_thermal_zone_of_sensor_register()c30d5d5 thermal: qoriq: constifythermal_zone_of_device_opsstructures
0e77488 thermal: qoriq: remove useless call forof_thermal_get_trip_points()
4352844 thermal: qoriq: Add thermal management supportQuoted 1 line
Quoted 1 line
Currently my patch was created based on Run's tree, probably I should
rebase it to soc tree.
Quoted 24 lines
Quoted 3 lines
But whichever tree I use, it can't be merged to Linus' tree without conflict.
Something I missed?
No.
Eduardo, Rui,
why not create a 'thermal' group ala 'tip' group with a single tree and two branches:
thermal/next
thermal/fixes- Rui takes the core changes.
- Eduardo takes the SoC changes.- Both commit to thermal/next
- Both commit to thermal/fixes
- Both merge thermal/fixes into thermal/core as often as possible.That will help to have a more up to date branch, simplify the patch submission path and reduce the latency for the merge windows.
Quoted 8 lines
If you need help, I can take care of applying the fixes only and merge them to thermal/next.
That is how the tip subsystem works, Peter Ziljstra, Ingo Molnar, Thomas Gleixner, have all permissions to commit in the tip tree but they take care of their subsystems. If one is away for vacations or whatever, someone else can take over during the absence.
Quoted 9 lines
Yeah, that is a setup people have been following. It does not necessarily mean it will work for all cases though.
I believe regardless of process and tree setup what we are lacking here is a documentation of how things are being done.
As I mentioned, I will work on writing something up to document at least what we have today before any change in process gets in place.
[Andy] Besides the document, what about this patch? Could it be merged before the document is ready?
BR,
Andy
Quoted 384 lines
Quoted 271 lines
Quoted 271 lines
Quoted 271 lines
-----Original Message-----
From: Daniel Lezcano <[email protected]>
Sent: 2018年11月21日 16:44
To: Andy Tang <[email protected]>; [email protected]; [email protected]
Cc: [email protected]; [email protected]
Subject: Re: [PATCH v3] thermal: qoriq: add multiple sensors supportQuoted 6 lines · Andy Tang
Hi all,
Do you have any comments on this patch?
I found for our thermal
driver(qoriq_thermal.c)there are differentbetween the following two git trees:
Quoted 3 lines
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
branch: next
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-th
ermal.gi
t.Quoted 3 lines
branch: next
Could you please clarify which git tree/branch should I use?
SoC changes are submitted against linux-soc-thermal.git.
Generic thermal framework are sent against Zhang Rui's tree but it happens sometimes Eduardo pick them also when the changes are related to SoC behavior.
However, I agree that can be confusing :)
Eduardo, Rui,
how about to add a section in the maintainer handbook for the thermal to clarify the expectations and the flow?
Quoted 22 lines
Quoted 22 lines
-----Original Message-----
From: Andy Tang
Sent: 2018年11月14日 15:29
To: [email protected]; [email protected]
Cc: [email protected]; [email protected]; [email protected]
Subject: RE: [PATCH v3] thermal: qoriq: add multiple sensors supportPING.
BR,
AndyQuoted 8 lines
-----Original Message-----
From: [email protected] <[email protected]>
Sent: 2018年10月30日 9:00
To: [email protected]; [email protected]
Cc: [email protected]; [email protected]; [email protected]; Andy Tang <[email protected]>
Subject: [PATCH v3] thermal: qoriq: add multiple sensors supportQuoted 3 lines
Quoted 3 lines
Quoted 3 lines
From: Yuantian Tang <[email protected]>
The QorIQ Layerscape SoC has several thermal sensors but the
current
Quoted 87 lines
Quoted 87 lines
Quoted 46 lines
driver only supports one.
Massage the code to be sensor oriented and allow the support for multiple sensors.
Signed-off-by Yuantian Tang <[email protected]>Reviewed-by Daniel Lezcano <[email protected]>---
v3:
- add Reviewed-by
v2:
- update the commit message
- refine theqoriq_tmu_register_tmu_zone()drivers/thermal/qoriq_thermal.c | 100 ++++++++++++++++++--------------------- 1 files changed, 46 insertions(+), 54 deletions(-)(quoted diff) +0
-0
b/drivers/thermal/qoriq_thermal.cindex 450ed66..8beb344 100644drivers/thermal/qoriq_thermal.c +9
-2@@ -59,14 +59,21 @@ struct qoriq_tmu_regs {u32 ttr3cr;/* Temperature Range 3 Control Register */ }; +struct qoriq_tmu_data ; +/* * Thermal zone data */ +struct qoriq_sensor { +struct thermal_zone_device *tzd; +struct qoriq_tmu_data *qdata; +int id; +}; +struct qoriq_tmu_data { -struct thermal_zone_device *tz;struct qoriq_tmu_regs __iomem *regs; -int sensor_id;bool little_endian; +struct qoriq_sensor *sensor[SITES_MAX ]; }; static void tmu_write(struct qoriq_tmu_data *p, u32 val, voidQuoted 2 lines
__iomem
*addr) @@ -87,48 +94,51 @@ static u32 tmu_read(struct
qoriq_tmu_dataQuoted 38 lines
*p, void
__iomem*addr)static int
tmu_get_temp(void *p, int *temp){drivers/thermal/qoriq_thermal.c +16
-9+struct qoriq_sensor *qsensor = p; +struct qoriq_tmu_data *qdata = qsensor->qdata;u32 val; -struct qoriq_tmu_data *data = p; - val =tmu_read (data, &data->regs->site[data->sensor_id].tritsr); + val =tmu_read (qdata, &qdata->regs->site[qsensor->id].tritsr); *temp = (val &0xff ) *1000 ;return 0 ; } -static int qoriq_tmu_get_sensor_id (void ) +static const struct thermal_zone_of_device_ops tmu_tz_ops = { + .get_temp = tmu_get_temp, +}; + +static int qoriq_tmu_register_tmu_zone (struct platform_device +*pdev) { -int ret, id; -struct of_phandle_args sensor_specs; -struct device_node *np, *sensor_np; +struct qoriq_tmu_data *qdata =platform_get_drvdata (pdev); +int id, sites =0 ; - np =of_find_node_by_name (NULL ,"thermal-zones" ); -if (!np) -return -ENODEV ; +for (id =0 ; id <SITES_MAX ; id++) { + qdata->sensor[id] =devm_kzalloc (&pdev->dev, +sizeof (struct qoriq_sensor ),GFP_KERNEL ); +if (!qdata->sensor[id]) +return -ENOMEM ;Quoted 2 lines
Quoted 2 lines
drivers/thermal/qoriq_thermal.c
Quoted 2 lines
drivers/thermal/qoriq_thermal.c +0
-2- sensor_np =of_get_next_child (np,NULL ); - ret = of_parse_phandle_with_args(sensor_np,"thermal-sensors",
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
drivers/thermal/qoriq_thermal.c +2
-7-"#thermal-sensor-cells" , - 0, &sensor_specs); -if (ret) { -of_node_put (np); -of_node_put (sensor_np); -return ret; - } + qdata->sensor[id]->id = id; + qdata->sensor[id]->qdata = qdata;Quoted 5 lines
Quoted 5 lines
drivers/thermal/qoriq_thermal.c
Quoted 5 lines
drivers/thermal/qoriq_thermal.c +0
-5-if (sensor_specs.args_count >=1 ) { - id = sensor_specs.args[0 ]; - WARN(sensor_specs.args_count > 1, - "%s: too many cells in sensor specifier %d\n", - sensor_specs.np->name,sensor_specs.args_count);
Quoted 43 lines
Quoted 43 lines
Quoted 43 lines
drivers/thermal/qoriq_thermal.c +1
-3- }else { - id =0 ; - } + qdata->sensor[id]->tzd =devm_thermal_zone_of_sensor_register(
drivers/thermal/qoriq_thermal.c +13
-2+ &pdev->dev, id, qdata->sensor[id], &tmu_tz_ops); +if (IS_ERR (qdata->sensor[id]->tzd)) { +if (PTR_ERR (qdata->sensor[id]->tzd) == -ENODEV ) +continue ; +else +return PTR_ERR (qdata->sensor[id]->tzd); -of_node_put (np); -of_node_put (sensor_np); + } + + sites |=0x1 << (15 - id); + } +/* Enable monitoring */ +if (sites !=0 ) + tmu_write(qdata, sites | TMR_ME | TMR_ALPF,
&qdata->regs->tmr);drivers/thermal/qoriq_thermal.c +1
-1-return id; +return 0 ; }static int qoriq_tmu_calibration (struct platform_device *pdev)@@
-178,16 +188,11 @@ static voidqoriq_tmu_init_device(struct qoriq_tmu_data *data)drivers/thermal/qoriq_thermal.c +0
-5tmu_write (data,TMR_DISABLE , &data->regs->tmr); } -static const struct thermal_zone_of_device_ops tmu_tz_ops = { - .get_temp = tmu_get_temp, -}; -static int qoriq_tmu_probe (struct platform_device *pdev) {int ret;struct qoriq_tmu_data *data;struct device_node *np = pdev->dev.of_node; -u32 site;Quoted 2 lines
Quoted 2 lines
drivers/thermal/qoriq_thermal.c
Quoted 2 lines
drivers/thermal/qoriq_thermal.c +0
-0if (!np) { dev_err(&pdev->dev, "Device OF-Node is NULL"); @@-203,13
Quoted 1 line
Quoted 1 line
Quoted 1 line
+208,6 @@ static int qoriq_tmu_probe(struct
platform_device*pdev)
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
data->little_endian= of_property_read_bool(np,
"little-endian");Quoted 10 lines
Quoted 10 lines
drivers/thermal/qoriq_thermal.c
Quoted 10 lines
drivers/thermal/qoriq_thermal.c +0
-7- data->sensor_id =qoriq_tmu_get_sensor_id (); -if (data->sensor_id <0 ) { -dev_err (&pdev->dev,"Failed to get sensor id\n" ); - ret = -ENODEV ; - goto err_iomap; - } - data->regs =of_iomap (np,0 );if (!data->regs) {dev_err (&pdev->dev,"Failed to get memory region\n" );@@
Quoted 1 line
Quoted 1 line
Quoted 1 line
-223,19 +221,13 @@ static int qoriq_tmu_probe(struct
platform_deviceQuoted 28 lines
Quoted 27 lines
Quoted 27 lines
*pdev)
drivers/thermal/qoriq_thermal.c +5
-12if (ret <0 ) goto err_tmu; - data->tz =devm_thermal_zone_of_sensor_register (&pdev->dev, - data->sensor_id, - data, &tmu_tz_ops); -if (IS_ERR (data->tz)) { - ret =PTR_ERR (data->tz); -dev_err (&pdev->dev, -"Failed to register thermal zone device %d\n" , ret); - goto err_tmu; + ret =qoriq_tmu_register_tmu_zone (pdev); +if (ret <0 ) { +dev_err (&pdev->dev,"Failed to register sensors\n" ); + ret = -ENODEV ; + goto err_iomap; } -/* Enable monitoring */ - site =0x1 << (15 - data->sensor_id); -tmu_write (data, site |TMR_ME |TMR_ALPF , &data->regs->tmr);return 0 ; --1.7.1
Quoted 5 lines
&data=02%7C01%7Candy.tang%40nxp.com%7C523c8a2809a34f57700808d 65
Quoted 1 line
Quoted 1 line
Quoted 1 line
61f0575%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C636791088572 03
Quoted 1 line
Quoted 1 line
Quoted 1 line
0840&sdata=XV0I9%2B3FctUSF%2BDAqRVEWGk8ITzshd%2FtQfpRZJguYZc %3D
Quoted 1 line
Quoted 1 line
Quoted 1 line
&reserved=0%2F&data=02%7C01%7Candy.tang%40nxp.com%7Ca0
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
d265f95a424d33256b08d64f8d74c8%7C686ea1d3bc2b4c6fa92cd99c5c 301635%7C0%7C0%7C636783866299399290&sdata=AVw3XdjmiRO XP7Xz7MTNMVgzI8hYG9aWsR02opMZqjM%3D&reserved=0> Linaro.org │ Open source software for ARM SoCs
Follow Linaro:
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2F
https://emea01.safelinks.protection.outlook.com/?url=www.facebook.com&data=02%7C01%7Candy.tang%40nxp.com%7C523c8a2809a34f577008 08d
Quoted 1 line
Quoted 1 line
Quoted 1 line
6561f0575%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6367910885 72
Quoted 1 line
Quoted 1 line
Quoted 1 line
030840&sdata=bbsFbY4CoFGFyduTSXlR9oK42hpFGAXTmZMAswNchkU%3 D&
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
;reserved=0%2Fpages%2FLinaro&data=02%7C01%7Candy.tan g%40nxp.com%7Ca0d265f95a424d33256b08d64f8d74c8%7C686ea1d3b c2b4c6fa92cd99c5c301635%7C0%7C0%7C636783866299399290&s
data=NM8wm4ri%2F2kdBW0FdCSXrL5ogg6owPfoRGacqm%2BKsEw%3D&a
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
mp;reserved=0> Facebook |
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2F
twitter.com%2F%23!%2Flinaroorg&data=02%7C01%7Candy.tang%40n
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
xp.com%7Ca0d265f95a424d33256b08d64f8d74c8%7C686ea1d3bc2b4c6 fa92cd99c5c301635%7C0%7C0%7C636783866299399290&sdata= Wplqwpisgmqrf3yLhTzdo5O6TvN2Jfu5IjBTvS4xOWk%3D&reserved=0> Twitter |
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2F
https://emea01.safelinks.protection.outlook.com/?url=www.linaro.org&data=02%7C01%7Candy.tang%40nxp.com%7C523c8a2809a34f57700808d 65
Quoted 1 line
Quoted 1 line
Quoted 1 line
61f0575%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C636791088572 03
Quoted 1 line
Quoted 1 line
Quoted 1 line
0840&sdata=XV0I9%2B3FctUSF%2BDAqRVEWGk8ITzshd%2FtQfpRZJguYZc %3D
Quoted 1 line
Quoted 1 line
Quoted 1 line
&reserved=0%2Flinaro-blog%2F&data=02%7C01%7Candy.tang%40
Quoted 10 lines
Quoted 5 lines
Quoted 4 lines
nxp.com%7Ca0d265f95a424d33256b08d64f8d74c8%7C686ea1d3bc2b4c 6fa92cd99c5c301635%7C0%7C0%7C636783866299399290&sdata=I b6KFIP3LNPGuDDb1dpnOllrqAAsc%2BZNCUuJZUPso6k%3D&reserve d=0> Blog
--
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww
Quoted 1 line
.linaro.org%2F&data=02%7C01%7Candy.tang%40nxp.com%7C523c8a280
9a34f
Quoted 1 line
57700808d6561f0575%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6 36791
Quoted 1 line
088572030840&sdata=JdPh7CGtYKckvXZbaXyYh1YIzLIWuINxGuc8%2Fp5qb 7w%3
Quoted 4 lines
D&reserved=0> Linaro.org │ Open source software for ARM SoCs
Follow Linaro:
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww
Quoted 1 line
.facebook.com%2Fpages%2FLinaro&data=02%7C01%7Candy.tang%40nx
p.com%
Quoted 1 line
7C523c8a2809a34f57700808d6561f0575%7C686ea1d3bc2b4c6fa92cd99c5c3016 35%
Quoted 1 line
7C0%7C0%7C636791088572030840&sdata=120jlpoyO%2FErgYCdiJkQ5PIu1 lqIO
Quoted 3 lines
976W%2BBlifjq9zw%3D&reserved=0> Facebook |
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Ftwitter.com%2F%23!%2Flinaroorg&data=02%7C01%7Candy.tang%40nxp.com %7C5
Quoted 1 line
23c8a2809a34f57700808d6561f0575%7C686ea1d3bc2b4c6fa92cd99c5c301635 %7C0
Quoted 1 line
%7C0%7C636791088572030840&sdata=hqRnoNwph7It3VtREb9PMnktZn
6IWqPVht
Quoted 2 lines
RqXL8qyKA%3D&reserved=0> Twitter |
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww
Quoted 1 line
.linaro.org%2Flinaro-blog%2F&data=02%7C01%7Candy.tang%40nxp.com
%7C
Quoted 1 line
523c8a2809a34f57700808d6561f0575%7C686ea1d3bc2b4c6fa92cd99c5c301635 %7C
Quoted 1 line
0%7C0%7C636791088572030840&sdata=GYax5%2FZzQtx6omIyuMMw0klh rFUNsnP
Quoted 2 lines
LFZ%2Fsg4OY%2BYI%3D&reserved=0> Blog
Quoted 33 lines · Andy Tang
Hi Daniel,
Thanks for your explanation. The problem is these two trees are not synced well. Let's take our
driver(qoriq_thermal.c)for example.Git log on Rui's tree next branch:
2dfef65 thermal: qoriq: Switch to SPDX identifier
1a893a5 thermal: qoriq: Simplify the 'site' variable assignment f1506a6 thermal: qoriq: Usedevm_thermal_zone_of_sensor_register()c30d5d5 thermal: qoriq: constifythermal_zone_of_device_opsstructures 0e77488 thermal: qoriq: remove useless call forof_thermal_get_trip_points()4352844 thermal: qoriq: Add thermal management supportGit log on linux-soc-thermal tree branch next:
6017e2a thermal: qoriq: add i.mx8mq support
9b96566 thermal: Convert to using %pOFn instead of device_node.name c30d5d5 thermal: qoriq: constifythermal_zone_of_device_opsstructures 0e77488 thermal: qoriq: remove useless call forof_thermal_get_trip_points()4352844 thermal: qoriq: Add thermal management supportYou can see that the first 2-3 commits on these two tress are different.
The strange thing is they seems sync well on Linus' tree:
0ef7791 Merge branch 'linus' ofgit://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
6017e2a thermal: qoriq: add i.mx8mq support
9b96566 thermal: Convert to using %pOFn instead of device_node.name
2dfef65 thermal: qoriq: Switch to SPDX identifier
1a893a5 thermal: qoriq: Simplify the 'site' variable assignment
f1506a6 thermal: qoriq: Usedevm_thermal_zone_of_sensor_register()
c30d5d5 thermal: qoriq: constifythermal_zone_of_device_opsstructures
0e77488 thermal: qoriq: remove useless call forof_thermal_get_trip_points()
4352844 thermal: qoriq: Add thermal management support
Quoted 2 lines
Currently my patch was created based on Run's tree, probably I should rebase it to soc tree. But whichever tree I use, it can't be merged to Linus' tree without conflict.
I agree that trees out of sync does not help. However the idea was to have then separate, since couple of merge windows ago. But I believe the issue here is that we do not have some sort of cookbook describing the subsystem process.
I will work on describing it and sending a patch to have it documented.
Quoted 295 lines
Something I missed?
BR,
AndyQuoted 289 lines
-----Original Message-----
From: Daniel Lezcano <[email protected]>
Sent: 2018年11月21日 16:44
To: Andy Tang <[email protected]>; [email protected]; [email protected]
Cc: [email protected]; [email protected]
Subject: Re: [PATCH v3] thermal: qoriq: add multiple sensors supportQuoted 5 lines · Andy Tang
Hi all,
Do you have any comments on this patch?
I found for our thermal
driver(qoriq_thermal.c)there are differentbetween the following two git trees:
Quoted 3 lines
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
branch: next
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.gi
t.Quoted 3 lines
branch: next
Could you please clarify which git tree/branch should I use?
SoC changes are submitted against linux-soc-thermal.git.
Generic thermal framework are sent against Zhang Rui's tree but it happens sometimes Eduardo pick them also when the changes are related to SoC behavior.
However, I agree that can be confusing :)
Eduardo, Rui,
how about to add a section in the maintainer handbook for the thermal to clarify the expectations and the flow?
Quoted 21 lines
Quoted 21 lines
-----Original Message-----
From: Andy Tang
Sent: 2018年11月14日 15:29
To: [email protected]; [email protected]
Cc: [email protected]; [email protected]; [email protected]
Subject: RE: [PATCH v3] thermal: qoriq: add multiple sensors supportPING.
BR,
AndyQuoted 8 lines
-----Original Message-----
From: [email protected] <[email protected]>
Sent: 2018年10月30日 9:00
To: [email protected]; [email protected]
Cc: [email protected]; [email protected]; [email protected]; Andy Tang <[email protected]>
Subject: [PATCH v3] thermal: qoriq: add multiple sensors supportQuoted 3 lines
Quoted 3 lines
Quoted 3 lines
From: Yuantian Tang <[email protected]>
The QorIQ Layerscape SoC has several thermal sensors but the
current
Quoted 87 lines
Quoted 87 lines
Quoted 46 lines
driver only supports one.
Massage the code to be sensor oriented and allow the support for multiple sensors.
Signed-off-by Yuantian Tang <[email protected]>Reviewed-by Daniel Lezcano <[email protected]>---
v3:
- add Reviewed-by
v2:
- update the commit message
- refine theqoriq_tmu_register_tmu_zone()drivers/thermal/qoriq_thermal.c | 100 ++++++++++++++++++--------------------- 1 files changed, 46 insertions(+), 54 deletions(-)(quoted diff) +0
-0
b/drivers/thermal/qoriq_thermal.cindex 450ed66..8beb344 100644drivers/thermal/qoriq_thermal.c +9
-2@@ -59,14 +59,21 @@ struct qoriq_tmu_regs {u32 ttr3cr;/* Temperature Range 3 Control Register */ }; +struct qoriq_tmu_data ; +/* * Thermal zone data */ +struct qoriq_sensor { +struct thermal_zone_device *tzd; +struct qoriq_tmu_data *qdata; +int id; +}; +struct qoriq_tmu_data { -struct thermal_zone_device *tz;struct qoriq_tmu_regs __iomem *regs; -int sensor_id;bool little_endian; +struct qoriq_sensor *sensor[SITES_MAX ]; }; static void tmu_write(struct qoriq_tmu_data *p, u32 val, voidQuoted 2 lines
__iomem
*addr) @@ -87,48 +94,51 @@ static u32 tmu_read(struct
qoriq_tmu_dataQuoted 38 lines
*p, void
__iomem*addr)static int
tmu_get_temp(void *p, int *temp){drivers/thermal/qoriq_thermal.c +16
-9+struct qoriq_sensor *qsensor = p; +struct qoriq_tmu_data *qdata = qsensor->qdata;u32 val; -struct qoriq_tmu_data *data = p; - val =tmu_read (data, &data->regs->site[data->sensor_id].tritsr); + val =tmu_read (qdata, &qdata->regs->site[qsensor->id].tritsr); *temp = (val &0xff ) *1000 ;return 0 ; } -static int qoriq_tmu_get_sensor_id (void ) +static const struct thermal_zone_of_device_ops tmu_tz_ops = { + .get_temp = tmu_get_temp, +}; + +static int qoriq_tmu_register_tmu_zone (struct platform_device +*pdev) { -int ret, id; -struct of_phandle_args sensor_specs; -struct device_node *np, *sensor_np; +struct qoriq_tmu_data *qdata =platform_get_drvdata (pdev); +int id, sites =0 ; - np =of_find_node_by_name (NULL ,"thermal-zones" ); -if (!np) -return -ENODEV ; +for (id =0 ; id <SITES_MAX ; id++) { + qdata->sensor[id] =devm_kzalloc (&pdev->dev, +sizeof (struct qoriq_sensor ),GFP_KERNEL ); +if (!qdata->sensor[id]) +return -ENOMEM ;Quoted 2 lines
Quoted 2 lines
drivers/thermal/qoriq_thermal.c
Quoted 2 lines
drivers/thermal/qoriq_thermal.c +0
-2- sensor_np =of_get_next_child (np,NULL ); - ret = of_parse_phandle_with_args(sensor_np,"thermal-sensors",
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
drivers/thermal/qoriq_thermal.c +2
-7-"#thermal-sensor-cells" , - 0, &sensor_specs); -if (ret) { -of_node_put (np); -of_node_put (sensor_np); -return ret; - } + qdata->sensor[id]->id = id; + qdata->sensor[id]->qdata = qdata;Quoted 5 lines
Quoted 5 lines
drivers/thermal/qoriq_thermal.c static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr)
Quoted 5 lines
drivers/thermal/qoriq_thermal.c +0
-5-if (sensor_specs.args_count >=1 ) { - id = sensor_specs.args[0 ]; - WARN(sensor_specs.args_count > 1, - "%s: too many cells in sensor specifier %d\n", - sensor_specs.np->name,sensor_specs.args_count);
Quoted 42 lines
Quoted 42 lines
Quoted 42 lines
drivers/thermal/qoriq_thermal.c +1
-3- }else { - id =0 ; - } + qdata->sensor[id]->tzd =devm_thermal_zone_of_sensor_register(
drivers/thermal/qoriq_thermal.c +13
-2+ &pdev->dev, id, qdata->sensor[id], &tmu_tz_ops); +if (IS_ERR (qdata->sensor[id]->tzd)) { +if (PTR_ERR (qdata->sensor[id]->tzd) == -ENODEV ) +continue ; +else +return PTR_ERR (qdata->sensor[id]->tzd); -of_node_put (np); -of_node_put (sensor_np); + } + + sites |=0x1 << (15 - id); + } +/* Enable monitoring */ +if (sites !=0 ) + tmu_write(qdata, sites | TMR_ME | TMR_ALPF,
&qdata->regs->tmr);drivers/thermal/qoriq_thermal.c +1
-2-return id; +return 0 ; } static int qoriq_tmu_calibration(struct platform_device *pdev) @@ -178,16 +188,11 @@ static void qoriq_tmu_init_device(struct
qoriq_tmu_data*data)drivers/thermal/qoriq_thermal.c +0
-5tmu_write (data,TMR_DISABLE , &data->regs->tmr); } -static const struct thermal_zone_of_device_ops tmu_tz_ops = { - .get_temp = tmu_get_temp, -}; -static int qoriq_tmu_probe (struct platform_device *pdev) {int ret;struct qoriq_tmu_data *data;struct device_node *np = pdev->dev.of_node; -u32 site;Quoted 2 lines
Quoted 2 lines
drivers/thermal/qoriq_thermal.c
Quoted 2 lines
drivers/thermal/qoriq_thermal.c +0
-0if (!np) { dev_err(&pdev->dev, "Device OF-Node is NULL"); @@-203,13
Quoted 1 line
Quoted 1 line
Quoted 1 line
+208,6 @@ static int qoriq_tmu_probe(struct
platform_device*pdev)
Quoted 13 lines
Quoted 13 lines
drivers/thermal/qoriq_thermal.c static int qoriq_tmu_probe(struct platform_device *pdev) · line 213
Quoted 13 lines
drivers/thermal/qoriq_thermal.c +0
-7data->little_endian =of_property_read_bool (np,"little-endian" ); - data->sensor_id =qoriq_tmu_get_sensor_id (); -if (data->sensor_id <0 ) { -dev_err (&pdev->dev,"Failed to get sensor id\n" ); - ret = -ENODEV ; - goto err_iomap; - } - data->regs =of_iomap (np,0 );if (!data->regs) {dev_err (&pdev->dev,"Failed to get memory region\n" );@@
Quoted 1 line
Quoted 1 line
Quoted 1 line
-223,19 +221,13 @@ static int qoriq_tmu_probe(struct
platform_deviceQuoted 19 lines
Quoted 19 lines
Quoted 19 lines
*pdev)
drivers/thermal/qoriq_thermal.c +5
-8if (ret <0 ) goto err_tmu; - data->tz =devm_thermal_zone_of_sensor_register (&pdev->dev, - data->sensor_id, - data, &tmu_tz_ops); -if (IS_ERR (data->tz)) { - ret =PTR_ERR (data->tz); -dev_err (&pdev->dev, -"Failed to register thermal zone device %d\n" , ret); - goto err_tmu; + ret =qoriq_tmu_register_tmu_zone (pdev); +if (ret <0 ) { +dev_err (&pdev->dev,"Failed to register sensors\n" ); + ret = -ENODEV ; + goto err_iomap; }Quoted 9 lines
Quoted 8 lines
Quoted 8 lines
drivers/thermal/qoriq_thermal.c +0
-4-/* Enable monitoring */ - site =0x1 << (15 - data->sensor_id); -tmu_write (data, site |TMR_ME |TMR_ALPF , &data->regs->tmr);return 0 ; --1.7.1
--
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2F
www.linaro.org%2F&data=02%7C01%7Candy.tang%40nxp.com%7Ca0 d265f95a424d33256b08d64f8d74c8%7C686ea1d3bc2b4c6fa92cd99c5c 301635%7C0%7C0%7C636783866299399290&sdata=AVw3XdjmiRO XP7Xz7MTNMVgzI8hYG9aWsR02opMZqjM%3D&reserved=0> Linaro.org │ Open source software for ARM SoCsFollow Linaro:
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2F
www.facebook.com%2Fpages%2FLinaro&data=02%7C01%7Candy.tan g%40nxp.com%7Ca0d265f95a424d33256b08d64f8d74c8%7C686ea1d3b c2b4c6fa92cd99c5c301635%7C0%7C0%7C636783866299399290&s data=NM8wm4ri%2F2kdBW0FdCSXrL5ogg6owPfoRGacqm%2BKsEw%3D&a mp;reserved=0> Facebook |
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Ft
witter.com%2F%23!%2Flinaroorg&data=02%7C01%7Candy.tang%40n xp.com%7Ca0d265f95a424d33256b08d64f8d74c8%7C686ea1d3bc2b4c6 fa92cd99c5c301635%7C0%7C0%7C636783866299399290&sdata= Wplqwpisgmqrf3yLhTzdo5O6TvN2Jfu5IjBTvS4xOWk%3D&reserved=0> Twitter |
<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2F
www.linaro.org%2Flinaro-blog%2F&data=02%7C01%7Candy.tang%40 nxp.com%7Ca0d265f95a424d33256b08d64f8d74c8%7C686ea1d3bc2b4c 6fa92cd99c5c301635%7C0%7C0%7C636783866299399290&sdata=I b6KFIP3LNPGuDDb1dpnOllrqAAsc%2BZNCUuJZUPso6k%3D&reserve d=0> Blog
Zhang Rui
reviewerQuoted 15 lines · Daniel Lezcano
Quoted 13 lines · Andy Tang
Hi all,
Do you have any comments on this patch?
I found for our thermal
driver(qoriq_thermal.c)there are different between the following two git trees:git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
branch: nextgit://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-
thermal.git.
branch: nextQuoted 1 line
Could you please clarify which git tree/branch should I use?
Quoted 9 lines
SoC changes are submitted against linux-soc-thermal.git.
Generic thermal framework are sent against Zhang Rui's tree but it happens sometimes Eduardo pick them also when the changes are related to
SoC behavior.However, I agree that can be confusing :)
In the beginning, for soc thermal driver changes, I used to take them with Acked-by/Reviewed-by from Eduardo or the driver maintainers. Later, we have Eduardo to take the soc-thermal patches and send me pull request so that I can merge them altogether before merge window. Recently, we started to send separate pull requests to see how it goes.
So to make it easier, I agree we'd better stick with one tree.
thanks,
rui
Quoted 253 lines
Eduardo, Rui,
how about to add a section in the maintainer handbook for the thermal to
clarify the expectations and the flow?Quoted 246 lines
Quoted 246 lines
-----Original Message-----
From: Andy Tang
Sent: 2018年11月14日 15:29
To: [email protected]; [email protected]
Cc: [email protected]; [email protected]; [email protected]
Subject: RE: [PATCH v3] thermal: qoriq: add multiple sensors supportPING.
BR,
AndyQuoted 61 lines
-----Original Message-----
From: [email protected] <[email protected]>
Sent: 2018年10月30日 9:00
To: [email protected]; [email protected]
Cc: [email protected]; [email protected]; [email protected]; Andy Tang <[email protected]>
Subject: [PATCH v3] thermal: qoriq: add multiple sensors supportFrom: Yuantian Tang <[email protected]>
The QorIQ Layerscape SoC has several thermal sensors but the current
driver only supports one.Massage the code to be sensor oriented and allow the support for
multiple sensors.Signed-off-by Yuantian Tang <[email protected]>Reviewed-by Daniel Lezcano <[email protected]>---
v3:
- add Reviewed-by
v2:
- update the commit message
- refine theqoriq_tmu_register_tmu_zone()drivers/thermal/qoriq_thermal.c | 100
++++++++++++++++++---------------------1 files changed, 46 insertions(+), 54 deletions(-)(quoted diff) +0
-0
b/drivers/thermal/qoriq_thermal.cindex 450ed66..8beb344 100644drivers/thermal/qoriq_thermal.c +0
-0@@ -59,14 +59,21 @@ struct qoriq_tmu_regs {u32 ttr3cr; /* Temperature Range 3
Control Register */
};drivers/thermal/qoriq_thermal.c +2
-0+struct qoriq_tmu_data ; +/*
* Thermal zone data
*/drivers/thermal/qoriq_thermal.c +6
-0+struct qoriq_sensor { +struct thermal_zone_device *tzd; +struct qoriq_tmu_data *qdata; +int id; +}; +struct
qoriq_tmu_data{drivers/thermal/qoriq_thermal.c +0
-1-struct thermal_zone_device *tz;struct
qoriq_tmu_regs__iomem*regs;drivers/thermal/qoriq_thermal.c +0
-1-int sensor_id;bool
little_endian;drivers/thermal/qoriq_thermal.c +1
-0+struct qoriq_sensor *sensor[SITES_MAX ];};
Quoted 3 lines
static void tmu_write(struct
qoriq_tmu_data*p, u32 val, void__iomem
*addr) @@ -87,48 +94,51 @@ static u32 tmu_read(struct
qoriq_tmu_dataQuoted 165 lines
*p, void
__iomem*addr)static int
tmu_get_temp(void *p, int *temp){drivers/thermal/qoriq_thermal.c +2
-0+struct qoriq_sensor *qsensor = p; +struct qoriq_tmu_data *qdata = qsensor->qdata;u32 val;
drivers/thermal/qoriq_thermal.c +0
-2-struct qoriq_tmu_data *data = p; - val = tmu_read(data, &data->regs->site[data-Quoted 1 line
sensor_id].tritsr);
drivers/thermal/qoriq_thermal.c +1
-0+ val = tmu_read(qdata, &qdata->regs->site[qsensor-Quoted 1 line
id].tritsr);
*temp = (val &
0xff) * 1000;return 0;
}drivers/thermal/qoriq_thermal.c +5
-1-static int qoriq_tmu_get_sensor_id (void ) +static const struct thermal_zone_of_device_ops tmu_tz_ops = { + .get_temp = tmu_get_temp, +}; + +static int qoriq_tmu_register_tmu_zone(struct platform_device*pdev)
{drivers/thermal/qoriq_thermal.c +1
-3-int ret, id; -struct of_phandle_args sensor_specs; -struct device_node *np, *sensor_np; + struct qoriq_tmu_data *qdata =
platform_get_drvdata(pdev);drivers/thermal/qoriq_thermal.c +4
-3+int id, sites =0 ; - np =of_find_node_by_name (NULL ,"thermal-zones" ); -if (!np) -return -ENODEV ; +for (id =0 ; id <SITES_MAX ; id++) { + qdata->sensor[id] = devm_kzalloc(&pdev->dev, + sizeof(struct qoriq_sensor),
GFP_KERNEL);drivers/thermal/qoriq_thermal.c +2
-2+if (!qdata->sensor[id]) +return -ENOMEM ; - sensor_np =of_get_next_child (np,NULL ); - ret = of_parse_phandle_with_args(sensor_np, "thermal-sensors",
drivers/thermal/qoriq_thermal.c +2
-11-"#thermal-sensor-cells" , - 0, &sensor_specs); -if (ret) { -of_node_put (np); -of_node_put (sensor_np); -return ret; - } + qdata->sensor[id]->id = id; + qdata->sensor[id]->qdata = qdata; -if (sensor_specs.args_count >=1 ) { - id = sensor_specs.args[0 ]; - WARN(sensor_specs.args_count > 1, - "%s: too many cells in sensorspecifier %d\n",
drivers/thermal/qoriq_thermal.c +0
-1- sensor_specs.np->name,sensor_specs.args_count);
drivers/thermal/qoriq_thermal.c +1
-3- }else { - id =0 ; - } + qdata->sensor[id]->tzd =devm_thermal_zone_of_sensor_register(
drivers/thermal/qoriq_thermal.c +1
-0+ &pdev->dev, id, qdata-Quoted 1 line
sensor[id],
&tmu_tz_ops);drivers/thermal/qoriq_thermal.c +5
-1+if (IS_ERR (qdata->sensor[id]->tzd)) { +if (PTR_ERR (qdata->sensor[id]->tzd) == -ENODEV) + continue; +else + return PTR_ERR(qdata-Quoted 1 line
sensor[id]->tzd);
drivers/thermal/qoriq_thermal.c +7
-2-of_node_put (np); -of_node_put (sensor_np); + } + + sites |=0x1 << (15 - id); + } +/* Enable monitoring */ +if (sites !=0 ) + tmu_write(qdata, sites | TMR_ME | TMR_ALPF,
&qdata->regs->tmr);drivers/thermal/qoriq_thermal.c +1
-1-return id; +return 0 ;}
static int
qoriq_tmu_calibration(struct platform_device *pdev)@@
-178,16 +188,11 @@ static voidqoriq_tmu_init_device(struct qoriq_tmu_data *data)
tmu_write(data, TMR_DISABLE, &data->regs->tmr); }drivers/thermal/qoriq_thermal.c +0
-4-static const struct thermal_zone_of_device_ops tmu_tz_ops = { - .get_temp = tmu_get_temp, -}; -static int
qoriq_tmu_probe(struct platform_device *pdev){ int ret;
structqoriq_tmu_data*data;
structdevice_node*np =pdev->dev.of_node;drivers/thermal/qoriq_thermal.c +0
-1-u32 site;if (!np) {
dev_err(&pdev->dev, "Device OF-Node is NULL"); @@ -203,13
+208,6 @@ static intqoriq_tmu_probe(struct platform_device *pdev)
data->little_endian=of_property_read_bool(np, "little-endian");drivers/thermal/qoriq_thermal.c +0
-3- data->sensor_id =qoriq_tmu_get_sensor_id (); -if (data->sensor_id <0 ) { - dev_err(&pdev->dev, "Failed to get sensorid\n");
drivers/thermal/qoriq_thermal.c +0
-4- ret = -ENODEV ; - goto err_iomap; - } -
data->regs=of_iomap(np, 0);
if (!data->regs) {
dev_err(&pdev->dev, "Failed to get memory region\n"); @@
-223,19 +221,13 @@ static int qoriq_tmu_probe(structplatform_device
*pdev)
if (ret < 0)
gotoerr_tmu;drivers/thermal/qoriq_thermal.c +0
-1- data->tz = devm_thermal_zone_of_sensor_register(&pdev-Quoted 1 line
dev,
drivers/thermal/qoriq_thermal.c +0
-1- data-Quoted 1 line
sensor_id,drivers/thermal/qoriq_thermal.c +0
-1- data,
&tmu_tz_ops);drivers/thermal/qoriq_thermal.c +0
-4-if (IS_ERR (data->tz)) { - ret =PTR_ERR (data->tz); - dev_err(&pdev->dev, - "Failed to register thermal zonedevice %d\n", ret);
drivers/thermal/qoriq_thermal.c +3
-1- goto err_tmu; + ret =qoriq_tmu_register_tmu_zone (pdev); +if (ret <0 ) { + dev_err(&pdev->dev, "Failed to registersensors\n");
drivers/thermal/qoriq_thermal.c +2
-0+ ret = -ENODEV ; + goto err_iomap;}
drivers/thermal/qoriq_thermal.c +0
-3-/* Enable monitoring */ - site =0x1 << (15 - data->sensor_id); - tmu_write(data, site | TMR_ME | TMR_ALPF, &data->regs-Quoted 1 line
tmr);
return 0;
--
1.7.1