IRQ affinity support in PLIC driver
Subsystems (3)
v3 cover IRQ affinity support in PLIC driver
This patchset primarily adds IRQ affinity support in PLIC driver and other improvements.
The patchset gives mechanism for explicitly routing external interrupts to particular CPUs using smp_affinity attribute of each Linux IRQs. Also, we can now use IRQ balancer from kernel-space or user-space.
The patchset is tested on QEMU virt machine. It is based on Linux-4.20-rc4 and can be found at riscv_plic_irq_affinity_v3 branch of:
https://github.com/avpatel/linux.git
Changes since v2:
- Fixed incorrect address of enable registers using sizeof(u32) in PATCH1
- Retained comment about need for locking in PATCH1
- Split PATCH2 into two patches
- Split PATCH3 into two patches
- Minor fix in commit description of PATCH4
Changes since v1:
- Removed few whitspace changes from PATCH1
- Keep use of DEFINE_PER_CPU() as it is
Anup Patel (6):
irqchip: sifive-plic: Pre-compute context hart base and enable base
irqchip: sifive-plic: Add struct plic_hw for global PLIC HW details
irqchip: sifive-plic: More flexible plic_irq_toggle()
irqchip: sifive-plic: Add warning in plic_init() if handler already
present
irqchip: sifive-plic: Differentiate between PLIC handler and context
irqchip: sifive-plic: Implement irq_set_affinity() for SMP host
drivers/irqchip/irq-sifive-plic.c | 143 +++++++++++++++++++----------- 1 file changed, 90 insertions(+), 53 deletions(-)
Signature · 1 line
2.17.1
PATCH v3 1/6 irqchip: sifive-plic: Pre-compute context hart base and enable base
This patch does following optimizations:
1. Pre-compute hart base for each context handler
2. Pre-compute enable base for each context handler
3. Have enable lock for each context handler instead of global plic_toggle_lock
--- drivers/irqchip/irq-sifive-plic.c | 47 ++++++++++++++----------------- 1 file changed, 21 insertions(+), 26 deletions(-)
drivers/irqchip/irq-sifive-plic.c +21 -26
@@ -59,37 +59,28 @@ static void __iomem *plic_regs;struct plic_handler {bool present; -int ctxid; +void __iomem *hart_base; +/* +* Protect mask operations on the registers given that we can't +* assume atomic memory operations work on them. +*/ +raw_spinlock_t enable_lock; +void __iomem *enable_base; }; static DEFINE_PER_CPU(struct plic_handler, plic_handlers); -static inline void __iomem *plic_hart_offset (int ctxid) -{ -return plic_regs +CONTEXT_BASE + ctxid *CONTEXT_PER_HART ; -} - -static inline u32 __iomem *plic_enable_base (int ctxid) -{ -return plic_regs +ENABLE_BASE + ctxid *ENABLE_PER_HART ; -} - -/* -* Protect mask operations on the registers given that we can't assume that -* atomic memory operations work on them. -*/ -static DEFINE_RAW_SPINLOCK (plic_toggle_lock); - -static inline void plic_toggle (int ctxid,int hwirq,int enable) +static inline void plic_toggle (struct plic_handler *handler, +int hwirq,int enable) { -u32 __iomem *reg =plic_enable_base (ctxid) + (hwirq /32 ); +u32 __iomem *reg = handler->enable_base + (hwirq /32 ) *sizeof (u32);u32 hwirq_mask =1 << (hwirq %32 ); -raw_spin_lock (&plic_toggle_lock); +raw_spin_lock (&handler->enable_lock);if (enable)writel (readl (reg) | hwirq_mask, reg);else writel (readl (reg) & ~hwirq_mask, reg); -raw_spin_unlock (&plic_toggle_lock); +raw_spin_unlock (&handler->enable_lock); }static inline void plic_irq_toggle (struct irq_data *d,int enable)
@@ -101,7 +92,7 @@ static inline void plic_irq_toggle(struct irq_data *d, int enable)struct plic_handler *handler =per_cpu_ptr (&plic_handlers, cpu);if (handler->present) -plic_toggle (handler->ctxid, d->hwirq, enable); +plic_toggle (handler, d->hwirq, enable); } }
@@ -150,7 +141,7 @@ static struct irq_domain *plic_irqdomain;static void plic_handle_irq (struct pt_regs *regs) {struct plic_handler *handler =this_cpu_ptr (&plic_handlers); -void __iomem *claim =plic_hart_offset (handler->ctxid) +CONTEXT_CLAIM ; +void __iomem *claim = handler->hart_base +CONTEXT_CLAIM ;irq_hw_number_t hwirq;WARN_ON_ONCE (!handler->present);
@@ -239,12 +230,16 @@ static int __init plic_init(struct device_node *node, cpu =riscv_hartid_to_cpuid (hartid); handler =per_cpu_ptr (&plic_handlers, cpu); handler->present = true; - handler->ctxid = i; + handler->hart_base = + plic_regs +CONTEXT_BASE + i *CONTEXT_PER_HART ; +raw_spin_lock_init (&handler->enable_lock); + handler->enable_base = + plic_regs +ENABLE_BASE + i *ENABLE_PER_HART ;/* priority must be > threshold to trigger an interrupt */ -writel (0 ,plic_hart_offset (i) +CONTEXT_THRESHOLD ); +writel (0 , handler->hart_base +CONTEXT_THRESHOLD );for (hwirq =1 ; hwirq <= nr_irqs; hwirq++) -plic_toggle (i, hwirq,0 ); +plic_toggle (handler, hwirq,0 ); nr_mapped++; }
Signature · 7 lines
2.17.1 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH v3 1/6] irqchip: sifive-plic: Pre-compute context hart base and enable base
Quoted 5 lines · Anup Patel
This patch does following optimizations:
1. Pre-compute hart base for each context handler
2. Pre-compute enable base for each context handler
3. Have enable lock for each context handler instead of globalplic_toggle_lock
All of which is pretty obvious from reading the patch. The big question that needs to be answered in the changelog is why you do that.
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH v3 1/6] irqchip: sifive-plic: Pre-compute context hart base and enable base
Quoted 10 lines · Christoph Hellwig
Quoted 5 lines · Anup Patel
This patch does following optimizations:
1. Pre-compute hart base for each context handler
2. Pre-compute enable base for each context handler
3. Have enable lock for each context handler instead of globalplic_toggle_lockAll of which is pretty obvious from reading the patch. The big question that needs to be answered in the changelog is why you do that.
To compute enable_base and hart_base is two integer additions and one integer multiplication. This micro-optimization simply avoids this repeated operations.
Regards,
Anup
PATCH v3 2/6 irqchip: sifive-plic: Add struct plic_hw for global PLIC HW details
In reply to Anup PatelThis patch adds Add struct plic_hw to represent global PLIC HW details.
Currently, these details are only used in plic_init() but in-future these will be useful in implementing PM suspend and resume callbacks.
Further, these global details are good debug info about HW so let's not throw them away after use in plic_init().
--- drivers/irqchip/irq-sifive-plic.c | 59 +++++++++++++++++-------------- 1 file changed, 33 insertions(+), 26 deletions(-)
drivers/irqchip/irq-sifive-plic.c +33 -26
@@ -55,8 +55,6 @@#define CONTEXT_THRESHOLD 0x00#define CONTEXT_CLAIM 0x04 -static void __iomem *plic_regs; -struct plic_handler {bool present;void __iomem *hart_base;
@@ -67,8 +65,19 @@ struct plic_handler {raw_spinlock_t enable_lock;void __iomem *enable_base; }; + static DEFINE_PER_CPU(struct plic_handler, plic_handlers); +struct plic_hw { +u32 nr_irqs; +u32 nr_handlers; +u32 nr_mapped; +void __iomem *regs; +struct irq_domain *irqdomain; +}; + +static struct plic_hw plic; +static inline void plic_toggle (struct plic_handler *handler,int hwirq,int enable) {
@@ -87,7 +96,7 @@ static inline void plic_irq_toggle(struct irq_data *d, int enable) {int cpu; -writel (enable, plic_regs +PRIORITY_BASE + d->hwirq *PRIORITY_PER_ID ); +writel (enable, plic.regs +PRIORITY_BASE + d->hwirq *PRIORITY_PER_ID );for_each_cpu (cpu,irq_data_get_affinity_mask (d)) {struct plic_handler *handler =per_cpu_ptr (&plic_handlers, cpu);
@@ -130,8 +139,6 @@ static const struct irq_domain_ops plic_irqdomain_ops = { .xlate = irq_domain_xlate_onecell, }; -static struct irq_domain *plic_irqdomain; -/* * Handling an interrupt is a two-step process: first you claim the interrupt * by reading the claim register, then you complete the interrupt by writing
@@ -148,7 +155,7 @@ static void plic_handle_irq(struct pt_regs *regs)csr_clear (sie,SIE_SEIE );while ((hwirq =readl (claim))) { -int irq =irq_find_mapping (plic_irqdomain, hwirq); +int irq =irq_find_mapping (plic.irqdomain, hwirq);if (unlikely (irq <=0 )) pr_warn_ratelimited("can't find mapping for hwirq %lu\n",
@@ -177,36 +184,35 @@ static int plic_find_hart_id(struct device_node *node)static int __init plic_init (struct device_node *node,struct device_node *parent) { -int error =0 , nr_handlers, nr_mapped =0 , i; -u32 nr_irqs; +int error =0 , i; -if (plic_regs) { +if (plic.regs) {pr_warn ("PLIC already present.\n" );return -ENXIO ; } - plic_regs =of_iomap (node,0 ); -if (WARN_ON (!plic_regs)) + plic.regs =of_iomap (node,0 ); +if (WARN_ON (!plic.regs))return -EIO ; error = -EINVAL ; -of_property_read_u32 (node,"riscv,ndev" , &nr_irqs); -if (WARN_ON (!nr_irqs)) +of_property_read_u32 (node,"riscv,ndev" , &plic.nr_irqs); +if (WARN_ON (!plic.nr_irqs)) goto out_iounmap; - nr_handlers =of_irq_count (node); -if (WARN_ON (!nr_handlers)) + plic.nr_handlers =of_irq_count (node); +if (WARN_ON (!plic.nr_handlers)) goto out_iounmap; -if (WARN_ON (nr_handlers <num_possible_cpus ())) +if (WARN_ON (plic.nr_handlers <num_possible_cpus ())) goto out_iounmap; error = -ENOMEM ; - plic_irqdomain =irq_domain_add_linear (node, nr_irqs +1 , - &plic_irqdomain_ops,NULL ); -if (WARN_ON (!plic_irqdomain)) + plic.irqdomain =irq_domain_add_linear (node, plic.nr_irqs +1 , + &plic_irqdomain_ops,NULL ); +if (WARN_ON (!plic.irqdomain)) goto out_iounmap; -for (i =0 ; i < nr_handlers; i++) { +for (i =0 ; i < plic.nr_handlers; i++) {struct of_phandle_args parent;struct plic_handler *handler;irq_hw_number_t hwirq;
@@ -231,25 +237,26 @@ static int __init plic_init(struct device_node *node, handler =per_cpu_ptr (&plic_handlers, cpu); handler->present = true; handler->hart_base = - plic_regs +CONTEXT_BASE + i *CONTEXT_PER_HART ; + plic.regs +CONTEXT_BASE + i *CONTEXT_PER_HART ;raw_spin_lock_init (&handler->enable_lock); handler->enable_base = - plic_regs +ENABLE_BASE + i *ENABLE_PER_HART ; + plic.regs +ENABLE_BASE + i *ENABLE_PER_HART ;/* priority must be > threshold to trigger an interrupt */ writel (0 , handler->hart_base +CONTEXT_THRESHOLD ); -for (hwirq =1 ; hwirq <= nr_irqs; hwirq++) +for (hwirq =1 ; hwirq <= plic.nr_irqs; hwirq++)plic_toggle (handler, hwirq,0 ); - nr_mapped++; + + plic.nr_mapped++; }pr_info ("mapped %d interrupts to %d (out of %d) handlers.\n" , - nr_irqs, nr_mapped, nr_handlers); + plic.nr_irqs, plic.nr_mapped, plic.nr_handlers);set_handle_irq (plic_handle_irq);return 0 ; out_iounmap: -iounmap (plic_regs); +iounmap (plic.regs);return error; }
Signature · 1 line
2.17.1
Re: [PATCH v3 2/6] irqchip: sifive-plic: Add struct plic_hw for global PLIC HW details
drivers/irqchip/irq-sifive-plic.c struct plic_handler { · line 79
Quoted 9 lines
drivers/irqchip/irq-sifive-plic.c +9
-0+struct plic_hw { +u32 nr_irqs; +u32 nr_handlers; +u32 nr_mapped; +void __iomem *regs; +struct irq_domain *irqdomain; +}; + +static struct plic_hw plic;
Please use local variables instead of a single instance struct. And only add these variables in the patches where you actually need them.
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH v3 2/6] irqchip: sifive-plic: Add struct plic_hw for global PLIC HW details
Quoted 14 lines · Christoph Hellwig
drivers/irqchip/irq-sifive-plic.c struct plic_handler { · line 79
Quoted 10 lines
drivers/irqchip/irq-sifive-plic.c +9
-0+struct plic_hw { +u32 nr_irqs; +u32 nr_handlers; +u32 nr_mapped; +void __iomem *regs; +struct irq_domain *irqdomain; +}; + +static struct plic_hw plic;Please use local variables instead of a single instance struct. And only add these variables in the patches where you actually need them.
I am sure it will be useful in-future but for now I will remove the struct instance.
Regards,
Anup
PATCH v3 3/6 irqchip: sifive-plic: More flexible plic_irq_toggle()
In reply to Anup PatelWe make plic_irq_toggle() more generic so that we can enable/disable hwirq for given cpumask. This generic plic_irq_toggle() will be eventually used to implement set_affinity for PLIC driver.
--- drivers/irqchip/irq-sifive-plic.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-)
drivers/irqchip/irq-sifive-plic.c +7 -8
@@ -78,8 +78,7 @@ struct plic_hw {static struct plic_hw plic; -static inline void plic_toggle (struct plic_handler *handler, -int hwirq,int enable) +static void plic_toggle (struct plic_handler *handler,int hwirq,int enable) {u32 __iomem *reg = handler->enable_base + (hwirq /32 ) *sizeof (u32);u32 hwirq_mask =1 << (hwirq %32 );
@@ -92,27 +91,27 @@ static inline void plic_toggle(struct plic_handler *handler,raw_spin_unlock (&handler->enable_lock); } -static inline void plic_irq_toggle (struct irq_data *d,int enable) +static void plic_irq_toggle (const struct cpumask *mask,int hwirq,int enable) {int cpu; -writel (enable, plic.regs +PRIORITY_BASE + d->hwirq *PRIORITY_PER_ID ); -for_each_cpu (cpu,irq_data_get_affinity_mask (d)) { +writel (enable, plic.regs +PRIORITY_BASE + hwirq *PRIORITY_PER_ID ); +for_each_cpu (cpu, mask) {struct plic_handler *handler =per_cpu_ptr (&plic_handlers, cpu);if (handler->present) -plic_toggle (handler, d->hwirq, enable); +plic_toggle (handler, hwirq, enable); } }static void plic_irq_enable (struct irq_data *d) { -plic_irq_toggle (d,1 ); +plic_irq_toggle (irq_data_get_affinity_mask (d), d->hwirq,1 ); }static void plic_irq_disable (struct irq_data *d) { -plic_irq_toggle (d,0 ); +plic_irq_toggle (irq_data_get_affinity_mask (d), d->hwirq,0 ); }static struct irq_chip plic_chip = {
Signature · 1 line
2.17.1
Re: [PATCH v3 3/6] irqchip: sifive-plic: More flexible plic_irq_toggle()
drivers/irqchip/irq-sifive-plic.c static inline void plic_toggle(struct plic_handler *handler, · line 94
Quoted 12 lines
drivers/irqchip/irq-sifive-plic.c +2
-3-static inline void plic_toggle (struct plic_handler *handler, -int hwirq,int enable) +static void plic_toggle (struct plic_handler *handler,int hwirq,int enable) {u32 __iomem *reg = handler->enable_base + (hwirq /32 ) *sizeof (u32);u32 hwirq_mask =1 << (hwirq %32 );@@ -92,27 +91,27 @@ static inline void plic_toggle(struct plic_handler *handler,raw_spin_unlock (&handler->enable_lock); } -static inline void plic_irq_toggle (struct irq_data *d,int enable) +static void plic_irq_toggle (const struct cpumask *mask,int hwirq,int enable)
It also removes inline statements which seems rather unrelated to the patch description.
Also the actual addintion of the single cpumask argument is simple enough that it should probably go into the patch that makes use of it.
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH v3 3/6] irqchip: sifive-plic: More flexible plic_irq_toggle()
Quoted 11 lines · Christoph Hellwig
Quoted 11 lines
drivers/irqchip/irq-sifive-plic.c +1
-2-static inline void plic_toggle (struct plic_handler *handler, -int hwirq,int enable) +static void plic_toggle (struct plic_handler *handler,int hwirq,int enable) {u32 __iomem *reg = handler->enable_base + (hwirq /32 ) *sizeof (u32);u32 hwirq_mask =1 << (hwirq %32 );@@ -92,27 +91,27 @@ static inline void plic_toggle(struct plic_handler *handler,raw_spin_unlock (&handler->enable_lock); }
Quoted 5 lines
drivers/irqchip/irq-sifive-plic.c static inline void plic_toggle(struct plic_handler *handler, · line 94
Quoted 2 lines
drivers/irqchip/irq-sifive-plic.c +1
-1-static inline void plic_irq_toggle (struct irq_data *d,int enable) +static void plic_irq_toggle (const struct cpumask *mask,int hwirq,int enable)It also removes inline statements which seems rather unrelated to the patch description.
Actually these functions should not be inline because plic_toggle() uses raw_spin_lock() and plic_irq_toggle() uses for-loop.
Quoted 3 lines
Also the actual addintion of the single cpumask argument is simple enough that it should probably go into the patch that makes use of it.
OK, I will have separate patch for removing "inline" and move addition of cpumask argument to last patch.
Regards,
Anup
Re: [PATCH v3 3/6] irqchip: sifive-plic: More flexible plic_irq_toggle()
Quoted 2 lines · Anup Patel
Actually these functions should not be inline because
plic_toggle()usesraw_spin_lock()andplic_irq_toggle()uses for-loop.
So? It still inlines the all of two instances into each caller for slightly different but related work. Not sure it is 100% worth it, but probably more than the one to move the calculations to init time..
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH v3 3/6] irqchip: sifive-plic: More flexible plic_irq_toggle()
Quoted 9 lines · Christoph Hellwig
Quoted 2 lines · Anup Patel
Actually these functions should not be inline because
plic_toggle()usesraw_spin_lock()andplic_irq_toggle()uses for-loop.So? It still inlines the all of two instances into each caller for slightly different but related work. Not sure it is 100% worth it, but probably more than the one to move the calculations to init time..
Not just at init time but these functions will also be used when irq_affinity is changed by IRQ balancer at runtime.
Regards,
Anup
PATCH v3 4/6 irqchip: sifive-plic: Add warning in plic_init() if handler already present
In reply to Anup PatelWe have two enteries (one for M-mode and another for S-mode) in the interrupts-extended DT property of PLIC DT node for each HART. It is expected that firmware/bootloader will set M-mode HWIRQ line of each HART to 0xffffffff (i.e. -1) in interrupts-extended DT property because Linux runs in S-mode only.
If firmware/bootloader is buggy then it will not correctly update interrupts-extended DT property which might result in a plic_handler configured twice. This patch adds a warning in plic_init() if a plic_handler is already marked present. This warning provides us a hint about incorrectly updated interrupts-extended DT property.
--- drivers/irqchip/irq-sifive-plic.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/irqchip/irq-sifive-plic.c +5 -0
@@ -234,6 +234,11 @@ static int __init plic_init(struct device_node *node, cpu =riscv_hartid_to_cpuid (hartid); handler =per_cpu_ptr (&plic_handlers, cpu); +if (handler->present) { +pr_warn ("handler not available for context %d.\n" , i); +continue ; + } + handler->present = true; handler->hart_base = plic.regs +CONTEXT_BASE + i *CONTEXT_PER_HART ;
Signature · 1 line
2.17.1
Re: [PATCH v3 4/6] irqchip: sifive-plic: Add warning in plic_init() if handler already present
Quoted 22 lines · Anup Patel
We have two enteries (one for M-mode and another for S-mode) in the interrupts-extended DT property of PLIC DT node for each HART. It is expected that
firmware/bootloaderwill set M-mode HWIRQ line of each HART to0xffffffff(i.e. -1) in interrupts-extended DT property because Linux runs in S-mode only.If
firmware/bootloaderis buggy then it will not correctly update interrupts-extended DT property which might result in aplic_handlerconfigured twice. This patch adds a warning inplic_init()if aplic_handleris already marked present. This warning provides us a hint about incorrectly updated interrupts-extended DT property.Signed-off-by Anup Patel <[email protected]>--- drivers/irqchip/irq-sifive-plic.c | 5 +++++ 1 file changed, 5 insertions(+)drivers/irqchip/irq-sifive-plic.c +0
-0
drivers/irqchip/irq-sifive-plic.c static int __init plic_init(struct device_node *node, · line 240
Quoted 7 lines
drivers/irqchip/irq-sifive-plic.c +4
-0@@ -234,6 +234,11 @@ static int __init plic_init(struct device_node *node, cpu =riscv_hartid_to_cpuid (hartid); handler =per_cpu_ptr (&plic_handlers, cpu); +if (handler->present) { +pr_warn ("handler not available for context %d.\n" , i); +continue ; + }
Shouldn't this be something like "handler already present.."
Otherwise this looks fine:
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH v3 4/6] irqchip: sifive-plic: Add warning in plic_init() if handler already present
Quoted 25 lines · Christoph Hellwig
Quoted 23 lines · Anup Patel
We have two enteries (one for M-mode and another for S-mode) in the interrupts-extended DT property of PLIC DT node for each HART. It is expected that
firmware/bootloaderwill set M-mode HWIRQ line of each HART to0xffffffff(i.e. -1) in interrupts-extended DT property because Linux runs in S-mode only.If
firmware/bootloaderis buggy then it will not correctly update interrupts-extended DT property which might result in aplic_handlerconfigured twice. This patch adds a warning inplic_init()if aplic_handleris already marked present. This warning provides us a hint about incorrectly updated interrupts-extended DT property.Signed-off-by Anup Patel <[email protected]>--- drivers/irqchip/irq-sifive-plic.c | 5 +++++ 1 file changed, 5 insertions(+)drivers/irqchip/irq-sifive-plic.c +0
-0@@ -234,6 +234,11 @@ static int __init plic_init(struct device_node *node,
Quoted 8 lines
drivers/irqchip/irq-sifive-plic.c static int __init plic_init(struct device_node *node, · line 240
Quoted 6 lines
drivers/irqchip/irq-sifive-plic.c +4
-0cpu =riscv_hartid_to_cpuid (hartid); handler =per_cpu_ptr (&plic_handlers, cpu); +if (handler->present) { +pr_warn ("handler not available for context %d.\n" , i); +continue ; + }Shouldn't this be something like "handler already present.."
OK, I will re-phrase it.
Quoted 4 lines
Otherwise this looks fine:
Reviewed-by Christoph Hellwig <[email protected]>
Regards,
Anup
PATCH v3 5/6 irqchip: sifive-plic: Differentiate between PLIC handler and context
In reply to Anup PatelWe explicitly differentiate between PLIC handler and context because PLIC context is for given mode of HART whereas PLIC handler is per-CPU software construct meant for handling interrupts from a particular PLIC context.
To achieve this differentiation, we rename "nr_handlers" to "nr_contexts" and "nr_mapped" to "nr_handlers" in struct plic_hw.
--- drivers/irqchip/irq-sifive-plic.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/irqchip/irq-sifive-plic.c +8 -8
@@ -70,8 +70,8 @@ static DEFINE_PER_CPU(struct plic_handler, plic_handlers);struct plic_hw {u32 nr_irqs; +u32 nr_contexts;u32 nr_handlers; -u32 nr_mapped;void __iomem *regs;struct irq_domain *irqdomain; };
@@ -199,10 +199,10 @@ static int __init plic_init(struct device_node *node,if (WARN_ON (!plic.nr_irqs)) goto out_iounmap; - plic.nr_handlers =of_irq_count (node); -if (WARN_ON (!plic.nr_handlers)) + plic.nr_contexts =of_irq_count (node); +if (WARN_ON (!plic.nr_contexts)) goto out_iounmap; -if (WARN_ON (plic.nr_handlers <num_possible_cpus ())) +if (WARN_ON (plic.nr_contexts <num_possible_cpus ())) goto out_iounmap; error = -ENOMEM ;
@@ -211,7 +211,7 @@ static int __init plic_init(struct device_node *node,if (WARN_ON (!plic.irqdomain)) goto out_iounmap; -for (i =0 ; i < plic.nr_handlers; i++) { +for (i =0 ; i < plic.nr_contexts; i++) {struct of_phandle_args parent;struct plic_handler *handler;irq_hw_number_t hwirq;
@@ -251,11 +251,11 @@ static int __init plic_init(struct device_node *node,for (hwirq =1 ; hwirq <= plic.nr_irqs; hwirq++)plic_toggle (handler, hwirq,0 ); - plic.nr_mapped++; + plic.nr_handlers++; } -pr_info ("mapped %d interrupts to %d (out of %d) handlers.\n" , - plic.nr_irqs, plic.nr_mapped, plic.nr_handlers); +pr_info ("mapped %d interrupts with %d handlers for %d contexts.\n" , + plic.nr_irqs, plic.nr_handlers, plic.nr_contexts);set_handle_irq (plic_handle_irq);return 0 ;
Signature · 1 line
2.17.1
PATCH v3 6/6 irqchip: sifive-plic: Implement irq_set_affinity() for SMP host
In reply to Anup PatelCurrently on SMP host, all CPUs take external interrupts routed via PLIC. All CPUs will try to claim a given external interrupt but only one of them will succeed while other CPUs would simply resume whatever they were doing before. This means if we have N CPUs then for every external interrupt N-1 CPUs will always fail to claim it and waste their CPU time.
Instead of above, external interrupts should be taken by only one CPU and we should have provision to explicitly specify IRQ affinity from kernel-space or user-space.
This patch provides irq_set_affinity() implementation for PLIC driver. It also updates irq_enable() such that PLIC interrupts are only enabled for one of CPUs specified in IRQ affinity mask.
With this patch in-place, we can change IRQ affinity at any-time from user-space using procfs.
Example:
/ # cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
8: 44 0 0 0 SiFive PLIC 8 virtio0 10: 48 0 0 0 SiFive PLIC 10 ttyS0 IPI0: 55 663 58 363 Rescheduling interrupts IPI1: 0 1 3 16 Function call interrupts
/ #
/ #
/ # echo 4 > /proc/irq/10/smp_affinity
/ #
/ # cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
8: 45 0 0 0 SiFive PLIC 8 virtio0 10: 160 0 17 0 SiFive PLIC 10 ttyS0 IPI0: 68 693 77 410 Rescheduling interrupts IPI1: 0 2 3 16 Function call interrupts
--- drivers/irqchip/irq-sifive-plic.c | 35 +++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-)
drivers/irqchip/irq-sifive-plic.c +33 -2
@@ -106,14 +106,42 @@ static void plic_irq_toggle(const struct cpumask *mask, int hwirq, int enable)static void plic_irq_enable (struct irq_data *d) { -plic_irq_toggle (irq_data_get_affinity_mask (d), d->hwirq,1 ); +unsigned int cpu =cpumask_any_and (irq_data_get_affinity_mask (d), + cpu_online_mask); +WARN_ON (cpu >= nr_cpu_ids); +plic_irq_toggle (cpumask_of (cpu), d->hwirq,1 ); }static void plic_irq_disable (struct irq_data *d) { -plic_irq_toggle (irq_data_get_affinity_mask (d), d->hwirq,0 ); +plic_irq_toggle (cpu_possible_mask, d->hwirq,0 ); } +#ifdef CONFIG_SMP +static int plic_set_affinity (struct irq_data *d,const struct cpumask *mask_val, +bool force) +{ +unsigned int cpu; + +if (!force) + cpu =cpumask_any_and (mask_val, cpu_online_mask); +else + cpu =cpumask_first (mask_val); + +if (cpu >= nr_cpu_ids) +return -EINVAL ; + +if (!irqd_irq_disabled (d)) { +plic_irq_toggle (cpu_possible_mask, d->hwirq,0 ); +plic_irq_toggle (cpumask_of (cpu), d->hwirq,1 ); + } + +irq_data_update_effective_affinity (d,cpumask_of (cpu)); + +return IRQ_SET_MASK_OK_DONE ; +} +#endif +static struct irq_chip plic_chip = { .name ="SiFive PLIC" ,/*
@@ -122,6 +150,9 @@ static struct irq_chip plic_chip = {*/ .irq_enable = plic_irq_enable, .irq_disable = plic_irq_disable, +#ifdef CONFIG_SMP + .irq_set_affinity = plic_set_affinity, +#endif }; static int plic_irqdomain_map(struct irq_domain *d, unsigned int irq,
Signature · 1 line
2.17.1
Re: [PATCH v3 6/6] irqchip: sifive-plic: Implement irq_set_affinity() for SMP host
Quoted 3 lines · Anup Patel
This patch provides
irq_set_affinity()implementation for PLIC driver. It also updatesirq_enable()such that PLIC interrupts are only enabled for one of CPUs specified in IRQ affinity mask.
But normally our affinity masks are that - masks of CPUs that can take it. It seems a bit odd to then just pick the first one, as this means with default all-CPU masks we'll have all interrupts handled by the first CPU only.
drivers/irqchip/irq-sifive-plic.c static void plic_irq_toggle(const struct cpumask *mask, int hwirq, int enable) · line 111
Quoted 10 lines
drivers/irqchip/irq-sifive-plic.c +3
-1@@ -106,14 +106,42 @@ static void plic_irq_toggle(const struct cpumask *mask, int hwirq, int enable)static void plic_irq_enable (struct irq_data *d) { -plic_irq_toggle (irq_data_get_affinity_mask (d), d->hwirq,1 ); +unsigned int cpu =cpumask_any_and (irq_data_get_affinity_mask (d), + cpu_online_mask); +WARN_ON (cpu >= nr_cpu_ids);
I think this should be WARN_ON_ONCE and actually return instead of then proceeding using the invalid cpu index.
drivers/irqchip/irq-sifive-plic.c static void plic_irq_toggle(const struct cpumask *mask, int hwirq, int enable) · line 112
Quoted 1 line
drivers/irqchip/irq-sifive-plic.c +1
-0+#ifdef CONFIG_SMP
static int plic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
drivers/irqchip/irq-sifive-plic.c static void plic_irq_toggle(const struct cpumask *mask, int hwirq, int enable) · line 129
Quoted 8 lines
drivers/irqchip/irq-sifive-plic.c +8
-0+ bool force) +{ +unsigned int cpu; + +if (!force) + cpu =cpumask_any_and (mask_val, cpu_online_mask); +else + cpu =cpumask_first (mask_val);
maybe swap the two branches around to avoid the inversion of the force flag?
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH v3 6/6] irqchip: sifive-plic: Implement irq_set_affinity() for SMP host
Quoted 10 lines · Christoph Hellwig
Quoted 3 lines · Anup Patel
This patch provides
irq_set_affinity()implementation for PLIC driver. It also updatesirq_enable()such that PLIC interrupts are only enabled for one of CPUs specified in IRQ affinity mask.But normally our affinity masks are that - masks of CPUs that can take it. It seems a bit odd to then just pick the first one, as this means with default all-CPU masks we'll have all interrupts handled by the first CPU only.
Yes, affinity mask are CPUs which can take but there is also effective affinity mask which represent CPUs which will actually receive IRQ.
Interrupt controllers (unlike PLIC) can support hardware IRQ balancing. For such interrupt controllers, we inform all CPUs that can take IRQ but interrupt controller will only deliver IRQ to only one of the CPUs.
There are quite a few interrupt controllers which only allow IRQ to be taken by exactly one CPU. For such interrupt controllers, the interrupt controller driver has to to pick one CPU out of CPUs which can take IRQ (Example GICv2, GICv3, etc).
Quoted 6 lines
Quoted 6 lines
drivers/irqchip/irq-sifive-plic.c +0
-0@@ -106,14 +106,42 @@ static void plic_irq_toggle(const struct cpumask *mask, int hwirq, int enable)
Quoted 9 lines
drivers/irqchip/irq-sifive-plic.c static void plic_irq_toggle(const struct cpumask *mask, int hwirq, int enable) · line 111
Quoted 6 lines
drivers/irqchip/irq-sifive-plic.c +3
-1static void plic_irq_enable (struct irq_data *d) { -plic_irq_toggle (irq_data_get_affinity_mask (d), d->hwirq,1 ); +unsigned int cpu =cpumask_any_and (irq_data_get_affinity_mask (d), + cpu_online_mask); +WARN_ON (cpu >= nr_cpu_ids);I think this should be
WARN_ON_ONCEand actually return instead of then proceeding using the invalid cpu index.
Sure, will update.
Quoted 14 lines
drivers/irqchip/irq-sifive-plic.c static void plic_irq_toggle(const struct cpumask *mask, int hwirq, int enable) · line 112
Quoted 2 lines
drivers/irqchip/irq-sifive-plic.c +1
-0+#ifdef CONFIG_SMP static int plic_set_affinity(struct
irq_data*d, const struct cpumask*mask_val,drivers/irqchip/irq-sifive-plic.c static void plic_irq_toggle(const struct cpumask *mask, int hwirq, int enable) · line 129
Quoted 8 lines
drivers/irqchip/irq-sifive-plic.c +8
-0+ bool force) +{ +unsigned int cpu; + +if (!force) + cpu =cpumask_any_and (mask_val, cpu_online_mask); +else + cpu =cpumask_first (mask_val);maybe swap the two branches around to avoid the inversion of the force flag?
Sure, will update.
Regards,
Anup
Quoted 32 lines · Anup Patel
This patchset primarily adds IRQ affinity support in PLIC driver and other improvements.
The patchset gives mechanism for explicitly routing external interrupts to particular CPUs using
smp_affinityattribute of each Linux IRQs. Also, we can now use IRQ balancer from kernel-space or user-space.The patchset is tested on QEMU virt machine. It is based on Linux-4.20-rc4 and can be found at
riscv_plic_irq_affinity_v3branch of:
https://github.com/avpatel/linux.gitChanges since v2:
- Fixed incorrect address of enable registers using sizeof(u32) in PATCH1
- Retained comment about need for locking in PATCH1
- Split PATCH2 into two patches
- Split PATCH3 into two patches
- Minor fix in commit description of PATCH4Changes since v1:
- Removed few whitspace changes from PATCH1
- Keep use ofDEFINE_PER_CPU()as it isAnup Patel (6):
irqchip: sifive-plic: Pre-compute context hart base and enable base
irqchip: sifive-plic: Add structplic_hwfor global PLIC HW details
irqchip: sifive-plic: More flexibleplic_irq_toggle()
irqchip: sifive-plic: Add warning inplic_init()if handler already
present
irqchip: sifive-plic: Differentiate between PLIC handler and context
irqchip: sifive-plic: Implementirq_set_affinity()for SMP host
Quoted 6 lines
drivers/irqchip/irq-sifive-plic.c | 143 +++++++++++++++++++----------- 1 file changed, 90 insertions(+), 53 deletions(-)--
2.17.1
Hi All,
Any comments on this series?
Regards,
Anup
Quoted 33 lines · On Mon, 17 Dec 2018 01:37:58 PST (-0800), [email protected] wrote:
Quoted 32 lines · Anup Patel
This patchset primarily adds IRQ affinity support in PLIC driver and other improvements.
The patchset gives mechanism for explicitly routing external interrupts to particular CPUs using
smp_affinityattribute of each Linux IRQs. Also, we can now use IRQ balancer from kernel-space or user-space.The patchset is tested on QEMU virt machine. It is based on Linux-4.20-rc4 and can be found at
riscv_plic_irq_affinity_v3branch of:
https://github.com/avpatel/linux.gitChanges since v2:
- Fixed incorrect address of enable registers using sizeof(u32) in PATCH1
- Retained comment about need for locking in PATCH1
- Split PATCH2 into two patches
- Split PATCH3 into two patches
- Minor fix in commit description of PATCH4Changes since v1:
- Removed few whitspace changes from PATCH1
- Keep use ofDEFINE_PER_CPU()as it isAnup Patel (6):
irqchip: sifive-plic: Pre-compute context hart base and enable base
irqchip: sifive-plic: Add structplic_hwfor global PLIC HW details
irqchip: sifive-plic: More flexibleplic_irq_toggle()
irqchip: sifive-plic: Add warning inplic_init()if handler already
present
irqchip: sifive-plic: Differentiate between PLIC handler and context
irqchip: sifive-plic: Implementirq_set_affinity()for SMP host
Quoted 8 lines
Quoted 6 lines
drivers/irqchip/irq-sifive-plic.c | 143 +++++++++++++++++++----------- 1 file changed, 90 insertions(+), 53 deletions(-)--
2.17.1Any comments on this series?
I also haven't had a chance to look at these yet.