Skip to contentSkip to conversation

arm: am335x-pdu001: Enable CONFIG_BLK and CONFIG_DM_MMC

PATCH In review Felix Brack 2 participants 3 messages Nov 30, 2018 – Dec 7, 2018 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm: am335x-pdu001: Enable CONFIG_BLK and CONFIG_DM_MMC

This patch enables CONFIG_BLK as well as CONFIG_DM_MMC for the PDU001 board. It depends on Patrice Chotard's patch 'power: regulator: denied disable on always-on regulator' which prevents power cycling the vmmc supply. Without this patch the board will not boot as vmmc is unfortunately used by other board components, not just eMMC and micro SD card. Furthermore my patch 'dts: am335x-pdu001: Fix polarity of card detection input' is required to boot from external micro SD card. Without this patch no SD card will be detected and hence booting will fail.

---

 arch/arm/dts/am335x-pdu001-u-boot.dtsi | 8 ++++++++
 configs/am335x_pdu001_defconfig        | 5 +++++
 2 files changed, 13 insertions(+)
arch/arm/dts/am335x-pdu001-u-boot.dtsi +8 -0
index fbb6a3ff6b..84a07bdef4 100644
@@ -29,10 +29,18 @@
 	u-boot,dm-pre-reloc;
 };
 
+&mmc1 {
+	u-boot,dm-pre-reloc;
+};
+
 &mmc1_pins {
 	u-boot,dm-pre-reloc;
 };
 
+&mmc2 {
+	u-boot,dm-pre-reloc;
+};
+
 &mmc2_pins {
 	u-boot,dm-pre-reloc;
 };
configs/am335x_pdu001_defconfig +5 -0
index 065efca633..3cb38aff6e 100644
@@ -18,6 +18,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_SPL_POWER_SUPPORT=y
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
 CONFIG_AUTOBOOT_STOP_STR=" "
@@ -37,6 +38,10 @@ CONFIG_DEFAULT_DEVICE_TREE="am335x-pdu001"
 CONFIG_SPL_DM=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
+CONFIG_BLK=y
+CONFIG_SPL_BLK=y
+CONFIG_DM_MMC=y
+CONFIG_SPL_DM_MMC=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MMC_SDHCI=y
 CONFIG_PINCTRL=y
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/1 arm: am335x-pdu001: Enable CONFIG_BLK and CONFIG_DM_MMC

Quoted 10 lines · Felix Brack

This patch enables CONFIG_BLK as well as CONFIG_DM_MMC for the PDU001 board. It depends on Patrice Chotard's patch 'power: regulator: denied disable on always-on regulator' which prevents power cycling the vmmc supply. Without this patch the board will not boot as vmmc is unfortunately used by other board components, not just eMMC and micro SD card. Furthermore my patch 'dts: am335x-pdu001: Fix polarity of card detection input' is required to boot from external micro SD card. Without this patch no SD card will be detected and hence booting will fail.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181130/11a55aae/attachment.sig>
#2 lore raw
In reply to Felix Brack
Quoted 11 lines · Felix Brack

This patch enables CONFIG_BLK as well as CONFIG_DM_MMC for the PDU001 board. It depends on Patrice Chotard's patch 'power: regulator: denied disable on always-on regulator' which prevents power cycling the vmmc supply. Without this patch the board will not boot as vmmc is unfortunately used by other board components, not just eMMC and micro SD card. Furthermore my patch 'dts: am335x-pdu001: Fix polarity of card detection input' is required to boot from external micro SD card. Without this patch no SD card will be detected and hence booting will fail.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181207/f5c261c5/attachment.sig>