Skip to contentSkip to conversation

lib/lzo: performance improvements

PATCH Superseded Dave Rodgman 2 participants 10 messages Nov 30, 2018

Subsystems (4)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v3 cover lib/lzo: performance improvements

This patch series introduces performance improvements for lzo.

The previous version of this patchset is here:
https://lkml.org/lkml/2018/11/27/1086

Quoted 10 lines · Andrew Morton
Quoted 6 lines · On Thu, 29 Nov 2018 10:21:53 +0000 Dave Rodgman <[email protected]> wrote:
Quoted 3 lines

OK, so it's not just "separate lzo-rle", it's also "switch zram to a new compression algorithm by default". I'd say that usually I'd expect this to be separate patches.

Yes, fair point. akpm has picked this up now though, so probably a bit late to break it out into a separate patch?

That's fine. akpm is flexible ;) Whatever produces the best overall result in the permanent record, please.

Thanks - I've separated this as suggested. I've also fixed up the commit message for patch 1 (tidy-up ifdefs) which looks like it was accidentally changed (please ignore if the change was intentional).

Dave

#1 lore raw

PATCH 1/8 lib/lzo: tidy-up ifdefs

Modify the ifdefs in lzodefs.h to be more consistent with normal kernel macros (e.g., change __aarch64__ to CONFIG_ARM64).

Cc Herbert Xu <[email protected]>
Cc David S. Miller <[email protected]>
Cc Nitin Gupta <[email protected]>
Cc Richard Purdie <[email protected]>
Cc Markus F.X.J. Oberhumer <[email protected]>
Cc Minchan Kim <[email protected]>
Cc Sergey Senozhatsky <[email protected]>
Cc Sonny Rao <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Matt Sealey <[email protected]>
---
 lib/lzo/lzodefs.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
lib/lzo/lzodefs.h +4 -4
index 4edefd2f540c..497f9c9f03a8 100644
@@ -15,7 +15,7 @@
 
 #define COPY4(dst, src)	\
 		put_unaligned(get_unaligned((const u32 *)(src)), (u32 *)(dst))
-#if defined(__x86_64__)
+#if defined(CONFIG_X86_64)
 #define COPY8(dst, src)	\
 		put_unaligned(get_unaligned((const u64 *)(src)), (u64 *)(dst))
 #else
@@ -25,12 +25,12 @@
 
 #if defined(__BIG_ENDIAN) && defined(__LITTLE_ENDIAN)
 #error "conflicting endian definitions"
-#elif defined(__x86_64__)
+#elif defined(CONFIG_X86_64)
 #define LZO_USE_CTZ64	1
 #define LZO_USE_CTZ32	1
-#elif defined(__i386__) || defined(__powerpc__)
+#elif defined(CONFIG_X86) || defined(CONFIG_PPC)
 #define LZO_USE_CTZ32	1
-#elif defined(__arm__) && (__LINUX_ARM_ARCH__ >= 5)
+#elif defined(CONFIG_ARM) && (__LINUX_ARM_ARCH__ >= 5)
 #define LZO_USE_CTZ32	1
 #endif
 
Signature · 1 line
2.17.1
#2 lore raw

PATCH 2/8 lib/lzo: clean-up by introducing COPY16

In reply to Dave Rodgman

From: Matt Sealey <[email protected]>

Most compilers should be able to merge adjacent loads/stores of sizes which are less than but effect a multiple of a machine word size (in effect a memcpy() of a constant amount). However the semantics of the macro are that it just does the copy, the pointer increment is in the code, hence we see

    *a = *b
    a += 8
    b += 8
    *a = *b
    a += 8
    b += 8

This introduces a dependency between the two groups of statements which seems to defeat said compiler optimizers and generate some very strange sequences of addition and subtraction of address offsets (i.e. it is overcomplicated).

Since COPY8 is only ever used to copy amounts of 16 bytes (in pairs), just define COPY16 as COPY8,COPY8. We leave the definition to preserve the need to do unaligned accesses to machine-sized words per the original code intent, we just don't use it in the code proper.

COPY16 then gives us code like:

    *a = *b
    *(a+8) = *(b+8)
    a += 16
    b += 16

This seems to allow compilers to generate much better code by using base register writeback or simply positively incrementing offsets which seems to positively affect performance. It is, at least, fewer instructions to do the same job.

Cc David S. Miller <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Herbert Xu <[email protected]>
Cc Markus F.X.J. Oberhumer <[email protected]>
Cc Minchan Kim <[email protected]>
Cc Nitin Gupta <[email protected]>
Cc Richard Purdie <[email protected]>
Cc Sergey Senozhatsky <[email protected]>
Cc Sonny Rao <[email protected]>
---
 lib/lzo/lzo1x_compress.c        |  9 +++------
 lib/lzo/lzo1x_decompress_safe.c | 18 ++++++------------
 lib/lzo/lzodefs.h               |  3 +++
 3 files changed, 12 insertions(+), 18 deletions(-)
lib/lzo/lzo1x_compress.c +3 -6
index 236eb21167b5..82fb5571ce5e 100644
@@ -60,8 +60,7 @@ lzo1x_1_do_compress(const unsigned char *in, size_t in_len,
 				op += t;
 			} else if (t <= 16) {
 				*op++ = (t - 3);
-				COPY8(op, ii);
-				COPY8(op + 8, ii + 8);
+				COPY16(op, ii);
 				op += t;
 			} else {
 				if (t <= 18) {
@@ -76,8 +75,7 @@ lzo1x_1_do_compress(const unsigned char *in, size_t in_len,
 					*op++ = tt;
 				}
 				do {
-					COPY8(op, ii);
-					COPY8(op + 8, ii + 8);
+					COPY16(op, ii);
 					op += 16;
 					ii += 16;
 					t -= 16;
@@ -255,8 +253,7 @@ int lzo1x_1_compress(const unsigned char *in, size_t in_len,
 			*op++ = tt;
 		}
 		if (t >= 16) do {
-			COPY8(op, ii);
-			COPY8(op + 8, ii + 8);
+			COPY16(op, ii);
 			op += 16;
 			ii += 16;
 			t -= 16;
lib/lzo/lzo1x_decompress_safe.c +6 -12
index a1c387f6afba..aa95d3066b7d 100644
@@ -86,12 +86,9 @@ int lzo1x_decompress_safe(const unsigned char *in, size_t in_len,
 					const unsigned char *ie = ip + t;
 					unsigned char *oe = op + t;
 					do {
-						COPY8(op, ip);
-						op += 8;
-						ip += 8;
-						COPY8(op, ip);
-						op += 8;
-						ip += 8;
+						COPY16(op, ip);
+						op += 16;
+						ip += 16;
 					} while (ip < ie);
 					ip = ie;
 					op = oe;
@@ -187,12 +184,9 @@ int lzo1x_decompress_safe(const unsigned char *in, size_t in_len,
 			unsigned char *oe = op + t;
 			if (likely(HAVE_OP(t + 15))) {
 				do {
-					COPY8(op, m_pos);
-					op += 8;
-					m_pos += 8;
-					COPY8(op, m_pos);
-					op += 8;
-					m_pos += 8;
+					COPY16(op, m_pos);
+					op += 16;
+					m_pos += 16;
 				} while (op < oe);
 				op = oe;
 				if (HAVE_IP(6)) {
lib/lzo/lzodefs.h +3 -0
index 497f9c9f03a8..e1b3cf6459a9 100644
@@ -23,6 +23,9 @@
 		COPY4(dst, src); COPY4((dst) + 4, (src) + 4)
 #endif
 
+#define COPY16(dst, src) \
+	do { COPY8(dst, src); COPY8((dst) + 8, (src) + 8); } while (0)
+
 #if defined(__BIG_ENDIAN) && defined(__LITTLE_ENDIAN)
 #error "conflicting endian definitions"
 #elif defined(CONFIG_X86_64)
Signature · 1 line
2.17.1
#3 lore raw

RE: [PATCH 2/8] lib/lzo: clean-up by introducing COPY16

From: Dave Rodgman

Quoted 26 lines

Sent: 30 November 2018 11:48
From: Matt Sealey <[email protected]>

Most compilers should be able to merge adjacent loads/stores of sizes which are less than but effect a multiple of a machine word size (in effect a memcpy() of a constant amount). However the semantics of the macro are that it just does the copy, the pointer increment is in the code, hence we see

    *a = *b
    a += 8
    b += 8
    *a = *b
    a += 8
    b += 8

This introduces a dependency between the two groups of statements which seems to defeat said compiler optimizers and generate some very strange sequences of addition and subtraction of address offsets (i.e. it is overcomplicated).

Since COPY8 is only ever used to copy amounts of 16 bytes (in pairs), just define COPY16 as COPY8,COPY8. We leave the definition to preserve the need to do unaligned accesses to machine-sized words per the original code intent, we just don't use it in the code proper.

Quoted 6 lines

COPY16 then gives us code like:

    *a = *b
    *(a+8) = *(b+8)
    a += 16
    b += 16

You probably actually want:

	t1 = *b;
	t2 = *(b+8);
	*a = t1;
	*(a+8) = t2;
	a += 16;
	b += 16;

	David

-
Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK Registration No: 1397386 (Wales)

#4 lore raw

PATCH 3/8 lib/lzo: enable 64-bit CTZ on Arm

In reply to Dave Rodgman

From: Matt Sealey <[email protected]>

ARMv6 Thumb state introduced an RBIT instruction which, combined with CLZ as present in ARMv5, introduces an extremely fast path for counting trailing zeroes.

Enable the use of the GCC builtin for this on ARMv6+ with CONFIG_THUMB2_KERNEL to ensure we get the 'new' instruction usage.

We do not bother enabling LZO_USE_CTZ64 support for ARMv5 as the builtin code path does the same thing as the LZO_USE_CTZ32 code, only with more register pressure.

Cc David S. Miller <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Herbert Xu <[email protected]>
Cc Markus F.X.J. Oberhumer <[email protected]>
Cc Minchan Kim <[email protected]>
Cc Nitin Gupta <[email protected]>
Cc Richard Purdie <[email protected]>
Cc Sergey Senozhatsky <[email protected]>
Cc Sonny Rao <[email protected]>
---
 lib/lzo/lzodefs.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
lib/lzo/lzodefs.h +6 -1
index e1b3cf6459a9..c0193f726db0 100644
@@ -33,9 +33,14 @@
 #define LZO_USE_CTZ32	1
 #elif defined(CONFIG_X86) || defined(CONFIG_PPC)
 #define LZO_USE_CTZ32	1
-#elif defined(CONFIG_ARM) && (__LINUX_ARM_ARCH__ >= 5)
+#elif defined(CONFIG_ARM)
+#if (__LINUX_ARM_ARCH__ >= 5)
 #define LZO_USE_CTZ32	1
 #endif
+#if (__LINUX_ARM_ARCH__ >= 6) && defined(CONFIG_THUMB2_KERNEL)
+#define LZO_USE_CTZ64	1
+#endif
+#endif
 
 #define M1_MAX_OFFSET	0x0400
 #define M2_MAX_OFFSET	0x0800
Signature · 1 line
2.17.1
#5 lore raw

PATCH 4/8 lib/lzo: 64-bit CTZ on arm64

In reply to Dave Rodgman

From: Matt Sealey <[email protected]>

LZO leaves some performance on the table by not realising that arm64 can optimize count-trailing-zeros bit operations.

Add CONFIG_ARM64 to the checked definitions alongside CONFIG_X86_64 to enable the use of rbit/clz instructions on full 64-bit quantities.

Cc David S. Miller <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Herbert Xu <[email protected]>
Cc Markus F.X.J. Oberhumer <[email protected]>
Cc Minchan Kim <[email protected]>
Cc Nitin Gupta <[email protected]>
Cc Richard Purdie <[email protected]>
Cc Sergey Senozhatsky <[email protected]>
Cc Sonny Rao <[email protected]>
---
 lib/lzo/lzodefs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/lzo/lzodefs.h +1 -1
index c0193f726db0..c8965dc181df 100644
@@ -28,7 +28,7 @@
 
 #if defined(__BIG_ENDIAN) && defined(__LITTLE_ENDIAN)
 #error "conflicting endian definitions"
-#elif defined(CONFIG_X86_64)
+#elif defined(CONFIG_X86_64) || defined(CONFIG_ARM64)
 #define LZO_USE_CTZ64	1
 #define LZO_USE_CTZ32	1
 #elif defined(CONFIG_X86) || defined(CONFIG_PPC)
Signature · 1 line
2.17.1
#6 lore raw

PATCH 5/8 lib/lzo: fast 8-byte copy on arm64

In reply to Dave Rodgman

From: Matt Sealey <[email protected]>

Enable faster 8-byte copies on arm64.

Cc David S. Miller <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Herbert Xu <[email protected]>
Cc Markus F.X.J. Oberhumer <[email protected]>
Cc Minchan Kim <[email protected]>
Cc Nitin Gupta <[email protected]>
Cc Richard Purdie <[email protected]>
Cc Sergey Senozhatsky <[email protected]>
Cc Sonny Rao <[email protected]>
---
 lib/lzo/lzodefs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/lzo/lzodefs.h +1 -1
index c8965dc181df..06fa83a38e0a 100644
@@ -15,7 +15,7 @@
 
 #define COPY4(dst, src)	\
 		put_unaligned(get_unaligned((const u32 *)(src)), (u32 *)(dst))
-#if defined(CONFIG_X86_64)
+#if defined(CONFIG_X86_64) || defined(CONFIG_ARM64)
 #define COPY8(dst, src)	\
 		put_unaligned(get_unaligned((const u64 *)(src)), (u64 *)(dst))
 #else
Signature · 1 line
2.17.1
#7 lore raw

PATCH 6/8 lib/lzo: implement run-length encoding

In reply to Dave Rodgman

When using zram, we frequently encounter long runs of zero bytes. This adds a special case which identifies runs of zeros and encodes them using run-length encoding.

This is faster for both compression and decompresion. For high-entropy data which doesn't hit this case, impact is minimal.

Compression ratio is within a few percent in all cases.

This modifies the bitstream in a way which is backwards compatible (i.e., we can decompress old bitstreams, but old versions of lzo cannot decompress new bitstreams).

Cc David S. Miller <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Herbert Xu <[email protected]>
Cc Markus F.X.J. Oberhumer <[email protected]>
Cc Matt Sealey <[email protected]>
Cc Minchan Kim <[email protected]>
Cc Nitin Gupta <[email protected]>
Cc Richard Purdie <[email protected]>
Cc Sergey Senozhatsky <[email protected]>
Cc Sonny Rao <[email protected]>
---
 Documentation/lzo.txt           | 35 +++++++++---
 include/linux/lzo.h             |  2 +-
 lib/lzo/lzo1x_compress.c        | 98 +++++++++++++++++++++++++++++----
 lib/lzo/lzo1x_decompress_safe.c | 75 +++++++++++++++++--------
 lib/lzo/lzodefs.h               | 12 +++-
 5 files changed, 180 insertions(+), 42 deletions(-)
Documentation/lzo.txt +28 -7
index 6fa6a93d0949..306c60344ca7 100644
@@ -78,16 +78,30 @@ Description
      is an implementation design choice independent on the algorithm or
      encoding.
 
+Versions
+
+0: Original version
+1: LZO-RLE
+
+Version 1 of LZO implements an extension to encode runs of zeros using run
+length encoding. This improves speed for data with many zeros, which is a
+common case for zram. This modifies the bitstream in a backwards compatible way
+(v1 can correctly decompress v0 compressed data, but v0 cannot read v1 data).
+
 Byte sequences
 ==============
 
   First byte encoding::
 
-      0..17   : follow regular instruction encoding, see below. It is worth
-                noting that codes 16 and 17 will represent a block copy from
-                the dictionary which is empty, and that they will always be
+      0..16   : follow regular instruction encoding, see below. It is worth
+                noting that code 16 will represent a block copy from the
+                dictionary which is empty, and that it will always be
                 invalid at this place.
 
+      17      : bitstream version. If the first byte is 17, the next byte
+                gives the bitstream version. If the first byte is not 17,
+                the bitstream version is 0.
+
       18..21  : copy 0..3 literals
                 state = (byte - 17) = 0..3  [ copy <state> literals ]
                 skip byte
@@ -140,6 +154,11 @@ Byte sequences
            state = S (copy S literals after this block)
            End of stream is reached if distance == 16384
 
+        In version 1, this instruction is also used to encode a run of zeros if
+        distance = 0xbfff, i.e. H = 1 and the D bits are all 1.
+           In this case, it is followed by a fourth byte, X.
+           run length = ((X << 3) | (0 0 0 0 0 L L L)) + 4.
+
       0 0 1 L L L L L  (32..63)
            Copy of small block within 16kB distance (preferably less than 34B)
            length = 2 + (L ?: 31 + (zero_bytes * 255) + non_zero_byte)
@@ -165,7 +184,9 @@ Authors
 =======
 
   This document was written by Willy Tarreau <[email protected]> on 2014/07/19 during an
-  analysis of the decompression code available in Linux 3.16-rc5. The code is
-  tricky, it is possible that this document contains mistakes or that a few
-  corner cases were overlooked. In any case, please report any doubt, fix, or
-  proposed updates to the author(s) so that the document can be updated.
+  analysis of the decompression code available in Linux 3.16-rc5, and updated
+  by Dave Rodgman <[email protected]> on 2018/10/30 to introduce run-length
+  encoding. The code is tricky, it is possible that this document contains
+  mistakes or that a few corner cases were overlooked. In any case, please
+  report any doubt, fix, or proposed updates to the author(s) so that the
+  document can be updated.
include/linux/lzo.h +1 -1
index 2ae27cb89927..547a86c71e1b 100644
@@ -18,7 +18,7 @@
 #define LZO1X_1_MEM_COMPRESS	(8192 * sizeof(unsigned short))
 #define LZO1X_MEM_COMPRESS	LZO1X_1_MEM_COMPRESS
 
-#define lzo1x_worst_compress(x) ((x) + ((x) / 16) + 64 + 3)
+#define lzo1x_worst_compress(x) ((x) + ((x) / 16) + 64 + 3 + 2)
 
 /* This requires 'wrkmem' of size LZO1X_1_MEM_COMPRESS */
 int lzo1x_1_compress(const unsigned char *src, size_t src_len,
lib/lzo/lzo1x_compress.c +88 -10

158 lines not on this page · raw message

lib/lzo/lzo1x_decompress_safe.c +52 -23

95 lines not on this page · raw message

lib/lzo/lzodefs.h +11 -1
index 06fa83a38e0a..682359058b3c 100644
@@ -13,6 +13,12 @@
  */
 
 
+/* Version
+ * 0: original lzo version
+ * 1: lzo with support for RLE
+ */
+#define LZO_VERSION 1
+
 #define COPY4(dst, src)	\
 		put_unaligned(get_unaligned((const u32 *)(src)), (u32 *)(dst))
 #if defined(CONFIG_X86_64) || defined(CONFIG_ARM64)
@@ -31,6 +37,7 @@
 #elif defined(CONFIG_X86_64) || defined(CONFIG_ARM64)
 #define LZO_USE_CTZ64	1
 #define LZO_USE_CTZ32	1
+#define LZO_FAST_64BIT_MEMORY_ACCESS
 #elif defined(CONFIG_X86) || defined(CONFIG_PPC)
 #define LZO_USE_CTZ32	1
 #elif defined(CONFIG_ARM)
@@ -45,7 +52,7 @@
 #define M1_MAX_OFFSET	0x0400
 #define M2_MAX_OFFSET	0x0800
 #define M3_MAX_OFFSET	0x4000
-#define M4_MAX_OFFSET	0xbfff
+#define M4_MAX_OFFSET	0xbffe
 
 #define M1_MIN_LEN	2
 #define M1_MAX_LEN	2
@@ -61,6 +68,9 @@
 #define M3_MARKER	32
 #define M4_MARKER	16
 
+#define MIN_ZERO_RUN_LENGTH	4
+#define MAX_ZERO_RUN_LENGTH	(2047 + MIN_ZERO_RUN_LENGTH)
+
 #define lzo_dict_t      unsigned short
 #define D_BITS		13
 #define D_SIZE		(1u << D_BITS)
Signature · 1 line
2.17.1
#8 lore raw

PATCH 7/8 lib/lzo: separate lzo-rle from lzo

In reply to Dave Rodgman

To prevent any issues with persistent data, separate lzo-rle from lzo so that it is treated as a separate algorithm, and lzo is still available.

Cc David S. Miller <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Herbert Xu <[email protected]>
Cc Markus F.X.J. Oberhumer <[email protected]>
Cc Matt Sealey <[email protected]>
Cc Minchan Kim <[email protected]>
Cc Nitin Gupta <[email protected]>
Cc Richard Purdie <[email protected]>
Cc Sergey Senozhatsky <[email protected]>
Cc Sonny Rao <[email protected]>
---
 Documentation/lzo.txt      |  12 ++-
 crypto/Makefile            |   2 +-
 crypto/lzo-rle.c           | 175 +++++++++++++++++++++++++++++++++++++
 crypto/tcrypt.c            |   4 +-
 drivers/block/zram/zcomp.c |   1 +
 include/linux/lzo.h        |   4 +
 lib/lzo/lzo1x_compress.c   |  42 +++++++--
 lib/lzo/lzodefs.h          |   3 +-
 8 files changed, 226 insertions(+), 17 deletions(-)
 create mode 100644 crypto/lzo-rle.c
Documentation/lzo.txt +8 -4
index 306c60344ca7..f79934225d8d 100644
@@ -88,6 +88,10 @@ length encoding. This improves speed for data with many zeros, which is a
 common case for zram. This modifies the bitstream in a backwards compatible way
 (v1 can correctly decompress v0 compressed data, but v0 cannot read v1 data).
 
+For maximum compatibility, both versions are available under different names
+(lzo and lzo-rle). Differences in the encoding are noted in this document with
+e.g.: version 1 only.
+
 Byte sequences
 ==============
 
@@ -99,8 +103,8 @@ Byte sequences
                 invalid at this place.
 
       17      : bitstream version. If the first byte is 17, the next byte
-                gives the bitstream version. If the first byte is not 17,
-                the bitstream version is 0.
+                gives the bitstream version (version 1 only). If the first byte
+                is not 17, the bitstream version is 0.
 
       18..21  : copy 0..3 literals
                 state = (byte - 17) = 0..3  [ copy <state> literals ]
@@ -154,8 +158,8 @@ Byte sequences
            state = S (copy S literals after this block)
            End of stream is reached if distance == 16384
 
-        In version 1, this instruction is also used to encode a run of zeros if
-        distance = 0xbfff, i.e. H = 1 and the D bits are all 1.
+        In version 1 only, this instruction is also used to encode a run of
+        zeros if distance = 0xbfff, i.e. H = 1 and the D bits are all 1.
            In this case, it is followed by a fourth byte, X.
            run length = ((X << 3) | (0 0 0 0 0 L L L)) + 4.
 
crypto/Makefile +1 -1
index 5e789dc2d4fd..23491b70e601 100644
@@ -127,7 +127,7 @@ obj-$(CONFIG_CRYPTO_CRC32C) += crc32c_generic.o
 obj-$(CONFIG_CRYPTO_CRC32) += crc32_generic.o
 obj-$(CONFIG_CRYPTO_CRCT10DIF) += crct10dif_common.o crct10dif_generic.o
 obj-$(CONFIG_CRYPTO_AUTHENC) += authenc.o authencesn.o
-obj-$(CONFIG_CRYPTO_LZO) += lzo.o
+obj-$(CONFIG_CRYPTO_LZO) += lzo.o lzo-rle.o
 obj-$(CONFIG_CRYPTO_LZ4) += lz4.o
 obj-$(CONFIG_CRYPTO_LZ4HC) += lz4hc.o
 obj-$(CONFIG_CRYPTO_842) += 842.o
crypto/lzo-rle.c new file +175 -0

175 lines not on this page · raw message

crypto/tcrypt.c +2 -2
index 0590a9204562..c1c56c9771cf 100644
@@ -76,8 +76,8 @@ static char *check[] = {
 	"cast6", "arc4", "michael_mic", "deflate", "crc32c", "tea", "xtea",
 	"khazad", "wp512", "wp384", "wp256", "tnepres", "xeta",  "fcrypt",
 	"camellia", "seed", "salsa20", "rmd128", "rmd160", "rmd256", "rmd320",
-	"lzo", "cts", "sha3-224", "sha3-256", "sha3-384", "sha3-512",
-	"streebog256", "streebog512",
+	"lzo", "lzo-rle", "cts", "sha3-224", "sha3-256", "sha3-384",
+	"sha3-512", "streebog256", "streebog512",
 	NULL
 };
 
drivers/block/zram/zcomp.c +1 -0
index 4ed0a78fdc09..4d9a38890965 100644
@@ -20,6 +20,7 @@
 
 static const char * const backends[] = {
 	"lzo",
+	"lzo-rle",
 #if IS_ENABLED(CONFIG_CRYPTO_LZ4)
 	"lz4",
 #endif
include/linux/lzo.h +4 -0
index 547a86c71e1b..e95c7d1092b2 100644
@@ -24,6 +24,10 @@
 int lzo1x_1_compress(const unsigned char *src, size_t src_len,
 		     unsigned char *dst, size_t *dst_len, void *wrkmem);
 
+/* This requires 'wrkmem' of size LZO1X_1_MEM_COMPRESS */
+int lzorle1x_1_compress(const unsigned char *src, size_t src_len,
+		     unsigned char *dst, size_t *dst_len, void *wrkmem);
+
 /* safe decompression with overrun testing */
 int lzo1x_decompress_safe(const unsigned char *src, size_t src_len,
 			  unsigned char *dst, size_t *dst_len);
lib/lzo/lzo1x_compress.c +33 -9

84 lines not on this page · raw message

lib/lzo/lzodefs.h +2 -1
index 682359058b3c..c0657441a35d 100644
@@ -52,7 +52,8 @@
 #define M1_MAX_OFFSET	0x0400
 #define M2_MAX_OFFSET	0x0800
 #define M3_MAX_OFFSET	0x4000
-#define M4_MAX_OFFSET	0xbffe
+#define M4_MAX_OFFSET_V0	0xbfff
+#define M4_MAX_OFFSET_V1	0xbffe
 
 #define M1_MIN_LEN	2
 #define M1_MAX_LEN	2
Signature · 1 line
2.17.1
#9 lore raw

PATCH 8/8 zram: default to lzo-rle instead of lzo

In reply to Dave Rodgman

lzo-rle gives higher performance and similar compression ratios to lzo.

Testing with 80 browser tabs showed a 27% reduction in total time spent (de)compressing data during swapping.

---
 drivers/block/zram/zram_drv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/block/zram/zram_drv.c +1 -1
index 58b025c5c83e..b8dc0976e385 100644
@@ -41,7 +41,7 @@ static DEFINE_IDR(zram_index_idr);
 static DEFINE_MUTEX(zram_index_mutex);
 
 static int zram_major;
-static const char *default_compressor = "lzo";
+static const char *default_compressor = "lzo-rle";
 
 /* Module params (documentation at end) */
 static unsigned int num_devices = 1;
Signature · 1 line
2.17.1