hwmon: fix typo build -> built
PATCH 1/2 hwmon: fix typo build -> built
This patch fix a typo where build is used instead of built.
--- drivers/hwmon/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/hwmon/Kconfig +4 -4
@@ -179,7 +179,7 @@ config SENSORS_ADT7X10 This module contains common code shared by the ADT7310/ADT7320 and ADT7410/ADT7420 temperature monitoring chip drivers. - If build as a module, the module will be called adt7x10. + If built as a module, the module will be called adt7x10. config SENSORS_ADT7310 tristate "Analog Devices ADT7310/ADT7320"
@@ -242,7 +242,7 @@ config SENSORS_ADT7475 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring chips. - This driver can also be build as a module. If so, the module + This driver can also be built as a module. If so, the module will be called adt7475. config SENSORS_ASC7621
@@ -666,7 +666,7 @@ config SENSORS_JZ4740 If you say yes here you get support for reading adc values from the ADCIN pin on Ingenic JZ4740 SoC based boards. - This driver can also be build as a module. If so, the module will be + This driver can also be built as a module. If so, the module will be called jz4740-hwmon. config SENSORS_JC42
@@ -1594,7 +1594,7 @@ config SENSORS_AMC6821 If you say yes here you get support for the Texas Instruments AMC6821 hardware monitoring chips. - This driver can also be build as a module. If so, the module + This driver can also be built as a module. If so, the module will be called amc6821. config SENSORS_INA209
Signature · 1 line
2.18.1
PATCH 2/2 hwmon: Remove multiple space after dot
This patch remove extra space after a dot.
--- drivers/hwmon/Kconfig | 236 +++++++++++++++++++++--------------------- 1 file changed, 118 insertions(+), 118 deletions(-)
drivers/hwmon/Kconfig +118 -118
@@ -11,7 +11,7 @@ menuconfig HWMON of a system. Most modern motherboards include such a device. It can include temperature sensors, voltage sensors, fan speed sensors and various additional features such as the ability to - control the speed of the fans. If you want this support you + control the speed of the fans. If you want this support you should say Y here and also to the specific driver(s) for your sensors chip(s) below.
@@ -19,7 +19,7 @@ menuconfig HWMON sensors-detect script from the lm_sensors package. Read <file:Documentation/hwmon/userspace-tools> for details. - This support can also be built as a module. If so, the module + This support can also be built as a module. If so, the module will be called hwmon. if HWMON
@@ -46,7 +46,7 @@ config SENSORS_AB8500 AB8500 die and two GPADC channels. The GPADC channel are preferably used to access sensors outside the AB8500 chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called abx500-temp. config SENSORS_ABITUGURU
@@ -61,7 +61,7 @@ config SENSORS_ABITUGURU of which motherboards have which revision see Documentation/hwmon/abituguru - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called abituguru. config SENSORS_ABITUGURU3
@@ -75,7 +75,7 @@ config SENSORS_ABITUGURU3 2005). For more info and a list of which motherboards have which revision see Documentation/hwmon/abituguru3 - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called abituguru3. config SENSORS_AD7314
@@ -116,7 +116,7 @@ config SENSORS_ADM1021 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called adm1021. config SENSORS_ADM1025
@@ -127,7 +127,7 @@ config SENSORS_ADM1025 If you say yes here you get support for Analog Devices ADM1025 and Philips NE1619 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called adm1025. config SENSORS_ADM1026
@@ -138,7 +138,7 @@ config SENSORS_ADM1026 If you say yes here you get support for Analog Devices ADM1026 sensor chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called adm1026. config SENSORS_ADM1029
@@ -149,7 +149,7 @@ config SENSORS_ADM1029 sensor chip. Very rare chip, please let us know you use it. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called adm1029. config SENSORS_ADM1031
@@ -159,7 +159,7 @@ config SENSORS_ADM1031 If you say yes here you get support for Analog Devices ADM1031 and ADM1030 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called adm1031. config SENSORS_ADM9240
@@ -170,7 +170,7 @@ config SENSORS_ADM9240 If you say yes here you get support for Analog Devices ADM9240, Dallas DS1780, National Semiconductor LM81 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called adm9240. config SENSORS_ADT7X10
@@ -242,7 +242,7 @@ config SENSORS_ADT7475 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called adt7475. config SENSORS_ASC7621
@@ -255,7 +255,7 @@ config SENSORS_ASC7621 aSC7621 aSC7621a - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called asc7621. config SENSORS_K8TEMP
@@ -267,7 +267,7 @@ config SENSORS_K8TEMP microarchitecture. Please note that you will need at least lm-sensors 2.10.1 for proper userspace support. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called k8temp. config SENSORS_K10TEMP
@@ -280,7 +280,7 @@ config SENSORS_K10TEMP 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo) and 16h (Kabini/Mullins) microarchitectures. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called k10temp. config SENSORS_FAM15H_POWER
@@ -290,7 +290,7 @@ config SENSORS_FAM15H_POWER If you say yes here you get support for processor power information of your AMD family 15h CPU. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called fam15h_power. config SENSORS_APPLESMC
@@ -326,7 +326,7 @@ config SENSORS_ARM_SCMI and power sensors available on SCMI based platforms. The actual number and type of sensors exported depend on the platform. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called scmi-hwmon. config SENSORS_ARM_SCPI
@@ -346,7 +346,7 @@ config SENSORS_ASB100 If you say yes here you get support for the ASB100 Bach sensor chip found on some Asus mainboards. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called asb100. config SENSORS_ASPEED
@@ -371,7 +371,7 @@ config SENSORS_ATXP1 If your board have such a chip, you are able to control your CPU core and other voltages. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called atxp1. config SENSORS_DS620
@@ -381,7 +381,7 @@ config SENSORS_DS620 If you say yes here you get support for Dallas Semiconductor DS620 sensor chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called ds620. config SENSORS_DS1621
@@ -396,7 +396,7 @@ config SENSORS_DS1621 - Maxim Integrated DS1721 - Maxim Integrated DS1731 - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called ds1621. config SENSORS_DELL_SMM
@@ -427,7 +427,7 @@ config SENSORS_DA9055 If you say yes here you get support for ADC on the Dialog Semiconductor DA9055 PMIC. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called da9055-hwmon. config SENSORS_I5K_AMB
@@ -448,7 +448,7 @@ config SENSORS_F71805F features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG Super-I/O chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called f71805f. config SENSORS_F71882FG
@@ -470,7 +470,7 @@ config SENSORS_F71882FG F81801U F81865F - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called f71882fg. config SENSORS_F75375S
@@ -480,7 +480,7 @@ config SENSORS_F75375S If you say yes here you get support for hardware monitoring features of the Fintek F75375S/SP, F75373 and F75387 - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called f75375s. config SENSORS_MC13783_ADC
@@ -502,7 +502,7 @@ config SENSORS_FSCHMD fscscy and fscher drivers and adding support for several other FSC sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called fschmd. config SENSORS_FTSTEUTATES
@@ -524,7 +524,7 @@ config SENSORS_GL518SM If you say yes here you get support for Genesys Logic GL518SM sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called gl518sm. config SENSORS_GL520SM
@@ -535,7 +535,7 @@ config SENSORS_GL520SM If you say yes here you get support for Genesys Logic GL520SM sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called gl520sm. config SENSORS_G760A
@@ -545,7 +545,7 @@ config SENSORS_G760A If you say yes here you get support for Global Mixed-mode Technology Inc G760A fan speed PWM controller chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called g760a. config SENSORS_G762
@@ -555,7 +555,7 @@ config SENSORS_G762 If you say yes here you get support for Global Mixed-mode Technology Inc G762 and G763 fan speed PWM controller chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called g762. config SENSORS_GPIO_FAN
@@ -566,7 +566,7 @@ config SENSORS_GPIO_FAN help If you say yes here you get support for fans connected to GPIO lines. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called gpio-fan. config SENSORS_HIH6130
@@ -576,7 +576,7 @@ config SENSORS_HIH6130 If you say yes here you get support for Honeywell Humidicon HIH-6130 and HIH-6131 Humidicon humidity sensors. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called hih6130. config SENSORS_IBMAEM
@@ -590,7 +590,7 @@ config SENSORS_IBMAEM the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, and certain HC10/HS2x/LS2x/QS2x blades. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called ibmaem. config SENSORS_IBMPEX
@@ -604,7 +604,7 @@ config SENSORS_IBMPEX x3655, and x3755; the x3800, x3850, and x3950 models that have PCI Express; and some of the HS2x, LS2x, and QS2x blades. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called ibmpex. config SENSORS_IBMPOWERNV
@@ -656,7 +656,7 @@ config SENSORS_IT87 IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950 clone. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called it87. config SENSORS_JZ4740
@@ -680,7 +680,7 @@ config SENSORS_JC42 MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called jc42. config SENSORS_POWR1220
@@ -691,7 +691,7 @@ config SENSORS_POWR1220 functions of the Lattice POWR1220 isp Power Supply Monitoring, Sequencing and Margining Controller. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called powr1220. config SENSORS_LINEAGE
@@ -702,7 +702,7 @@ config SENSORS_LINEAGE series of DC/DC and AC/DC converters such as CP1800, CP2000AC, CP2000DC, CP2725, and others. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lineage-pem. config SENSORS_LTC2945
@@ -803,7 +803,7 @@ config SENSORS_MAX1111 Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 ADC chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called max1111. config SENSORS_MAX16065
@@ -819,7 +819,7 @@ config SENSORS_MAX16065 MAX16070 MAX16071 - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called max16065. config SENSORS_MAX1619
@@ -828,7 +828,7 @@ config SENSORS_MAX1619 help If you say yes here you get support for MAX1619 sensor chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called max1619. config SENSORS_MAX1668
@@ -838,7 +838,7 @@ config SENSORS_MAX1668 If you say yes here you get support for MAX1668, MAX1989 and MAX1805 chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called max1668. config SENSORS_MAX197
@@ -881,7 +881,7 @@ config SENSORS_MAX6639 If you say yes here you get support for the MAX6639 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called max6639. config SENSORS_MAX6642
@@ -892,7 +892,7 @@ config SENSORS_MAX6642 MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor with Overtemperature Alarm from Maxim. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called max6642. config SENSORS_MAX6650
@@ -902,7 +902,7 @@ config SENSORS_MAX6650 If you say yes here you get support for the MAX6650 / MAX6651 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called max6650. config SENSORS_MAX6697
@@ -913,7 +913,7 @@ config SENSORS_MAX6697 MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 temperature sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called max6697. config SENSORS_MAX31790
@@ -923,7 +923,7 @@ config SENSORS_MAX31790 If you say yes here you get support for 6-Channel PWM-Output Fan RPM Controller. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called max31790. config SENSORS_MCP3021
@@ -934,7 +934,7 @@ config SENSORS_MCP3021 The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 with 12-bit resolution. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called mcp3021. config SENSORS_MLXREG_FAN
@@ -957,7 +957,7 @@ config SENSORS_TC654 The TC654 and TC655 are PWM mode fan speed controllers with FanSense technology for use with brushless DC fans. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called tc654. config SENSORS_MENF21BMC_HWMON
@@ -983,7 +983,7 @@ config SENSORS_ADCXX Examples : ADC081S101, ADC124S501, ... - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called adcxx. config SENSORS_LM63
@@ -996,7 +996,7 @@ config SENSORS_LM63 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among others. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm63. config SENSORS_LM70
@@ -1007,7 +1007,7 @@ config SENSORS_LM70 LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera- ture sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm70. config SENSORS_LM73
@@ -1016,7 +1016,7 @@ config SENSORS_LM73 help If you say yes here you get support for National Semiconductor LM73 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm73. config SENSORS_LM75
@@ -1046,7 +1046,7 @@ config SENSORS_LM75 that with some chips which don't replicate LM75 quirks exactly, you may need the "force" module parameter. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm75. config SENSORS_LM77
@@ -1056,7 +1056,7 @@ config SENSORS_LM77 If you say yes here you get support for National Semiconductor LM77 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm77. config SENSORS_LM78
@@ -1067,7 +1067,7 @@ config SENSORS_LM78 If you say yes here you get support for National Semiconductor LM78, LM78-J and LM79. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm78. config SENSORS_LM80
@@ -1077,7 +1077,7 @@ config SENSORS_LM80 If you say yes here you get support for National Semiconductor LM80 and LM96080 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm80. config SENSORS_LM83
@@ -1087,7 +1087,7 @@ config SENSORS_LM83 If you say yes here you get support for National Semiconductor LM82 and LM83 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm83. config SENSORS_LM85
@@ -1099,7 +1099,7 @@ config SENSORS_LM85 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, EMC6D101, EMC6D102, and EMC6D103. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm85. config SENSORS_LM87
@@ -1110,7 +1110,7 @@ config SENSORS_LM87 If you say yes here you get support for National Semiconductor LM87 and Analog Devices ADM1024 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm87. config SENSORS_LM90
@@ -1124,7 +1124,7 @@ config SENSORS_LM90 Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, GMT G781, and Texas Instruments TMP451 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm90. config SENSORS_LM92
@@ -1134,7 +1134,7 @@ config SENSORS_LM92 If you say yes here you get support for National Semiconductor LM92 and Maxim MAX6635 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm92. config SENSORS_LM93
@@ -1145,7 +1145,7 @@ config SENSORS_LM93 If you say yes here you get support for National Semiconductor LM93, LM94, and compatible sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm93. config SENSORS_LM95234
@@ -1155,7 +1155,7 @@ config SENSORS_LM95234 If you say yes here you get support for the LM95233 and LM95234 temperature sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm95234. config SENSORS_LM95241
@@ -1165,7 +1165,7 @@ config SENSORS_LM95241 If you say yes here you get support for LM95231 and LM95241 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm95241. config SENSORS_LM95245
@@ -1176,7 +1176,7 @@ config SENSORS_LM95245 If you say yes here you get support for LM95235 and LM95245 temperature sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm95245. config SENSORS_PC87360
@@ -1190,7 +1190,7 @@ config SENSORS_PC87360 control. The PC87365 and PC87366 additionally have voltage and temperature monitoring. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called pc87360. config SENSORS_PC87427
@@ -1204,7 +1204,7 @@ config SENSORS_PC87427 monitoring. Fan speed monitoring and control are supported, as well as temperature monitoring. Voltages aren't supported yet. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called pc87427. config SENSORS_NTC_THERMISTOR
@@ -1220,7 +1220,7 @@ config SENSORS_NTC_THERMISTOR NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333, NCP03WF104 and NCP15XH103 from Murata and B57330V2103 from EPCOS. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called ntc-thermistor. config SENSORS_NCT6683
@@ -1230,7 +1230,7 @@ config SENSORS_NCT6683 If you say yes here you get support for the hardware monitoring functionality of the Nuvoton NCT6683D eSIO chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called nct6683. config SENSORS_NCT6775
@@ -1244,7 +1244,7 @@ config SENSORS_NCT6775 Super-I/O chips. This driver replaces the w83627ehf driver for NCT6775F and NCT6776F. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called nct6775. config SENSORS_NCT7802
@@ -1255,7 +1255,7 @@ config SENSORS_NCT7802 If you say yes here you get support for the Nuvoton NCT7802Y hardware monitoring chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called nct7802. config SENSORS_NCT7904
@@ -1265,7 +1265,7 @@ config SENSORS_NCT7904 If you say yes here you get support for the Nuvoton NCT7904 hardware monitoring chip, including manual fan speed control. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called nct7904. config SENSORS_NPCM7XX
@@ -1302,11 +1302,11 @@ config SENSORS_PCF8591 If you say yes here you get support for Philips PCF8591 4-channel ADC, 1-channel DAC chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called pcf8591. These devices are hard to detect and rarely found on mainstream - hardware. If unsure, say N. + hardware. If unsure, say N. source drivers/hwmon/pmbus/Kconfig
@@ -1319,7 +1319,7 @@ config SENSORS_PWM_FAN The driver uses the generic PWM interface, thus it will work on a variety of SoCs. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called pwm-fan. config SENSORS_RASPBERRYPI_HWMON
@@ -1340,7 +1340,7 @@ config SENSORS_SHT15 If you say yes here you get support for the Sensiron SHT10, SHT11, SHT15, SHT71, SHT75 humidity and temperature sensors. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called sht15. config SENSORS_SHT21
@@ -1350,7 +1350,7 @@ config SENSORS_SHT21 If you say yes here you get support for the Sensiron SHT21, SHT25 humidity and temperature sensors. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called sht21. config SENSORS_SHT3x
@@ -1361,7 +1361,7 @@ config SENSORS_SHT3x If you say yes here you get support for the Sensiron SHT30 and SHT31 humidity and temperature sensors. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called sht3x. config SENSORS_SHTC1
@@ -1371,7 +1371,7 @@ config SENSORS_SHTC1 If you say yes here you get support for the Sensiron SHTC1 and SHTW1 humidity and temperature sensors. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called shtc1. config SENSORS_S3C
@@ -1398,7 +1398,7 @@ config SENSORS_SIS5595 If you say yes here you get support for the integrated sensors in SiS5595 South Bridges. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called sis5595. config SENSORS_DME1737
@@ -1410,7 +1410,7 @@ config SENSORS_DME1737 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and Asus A8000 Super-I/O chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called dme1737. config SENSORS_EMC1403
@@ -1431,7 +1431,7 @@ config SENSORS_EMC2103 If you say yes here you get support for the temperature and fan sensors of the SMSC EMC2103 chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called emc2103. config SENSORS_EMC6W201
@@ -1441,7 +1441,7 @@ config SENSORS_EMC6W201 If you say yes here you get support for the SMSC EMC6W201 hardware monitoring chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called emc6w201. config SENSORS_SMSC47M1
@@ -1458,7 +1458,7 @@ config SENSORS_SMSC47M1 driver, select also "SMSC LPC47M192 and compatibles" below for those. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called smsc47m1. config SENSORS_SMSC47M192
@@ -1475,7 +1475,7 @@ config SENSORS_SMSC47M192 "SMSC LPC47M10x and compatibles" above. You need both drivers if you want fan control and voltage/temperature sensor support. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called smsc47m192. config SENSORS_SMSC47B397
@@ -1485,7 +1485,7 @@ config SENSORS_SMSC47B397 If you say yes here you get support for the SMSC LPC47B397-NC sensor chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called smsc47b397. config SENSORS_SCH56XX_COMMON
@@ -1501,7 +1501,7 @@ config SENSORS_SCH5627 features of the SMSC SCH5627 Super-I/O chip including support for the integrated watchdog. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called sch5627. config SENSORS_SCH5636
@@ -1519,7 +1519,7 @@ config SENSORS_SCH5636 Theseus' hardware monitoring features including support for the integrated watchdog. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called sch5636. config SENSORS_STTS751
@@ -1529,7 +1529,7 @@ config SENSORS_STTS751 If you say yes here you get support for STTS751 temperature sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called stts751. config SENSORS_SMM665
@@ -1563,7 +1563,7 @@ config SENSORS_ADS1015 If you say yes here you get support for Texas Instruments ADS1015/ADS1115 12/16-bit 4-input ADC device. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called ads1015. config SENSORS_ADS7828
@@ -1575,7 +1575,7 @@ config SENSORS_ADS7828 ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while it is 8-bit on ADS7830. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called ads7828. config SENSORS_ADS7871
@@ -1584,7 +1584,7 @@ config SENSORS_ADS7871 help If you say yes here you get support for TI ADS7871 & ADS7870 - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called ads7871. config SENSORS_AMC6821
@@ -1594,7 +1594,7 @@ config SENSORS_AMC6821 If you say yes here you get support for the Texas Instruments AMC6821 hardware monitoring chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called amc6821. config SENSORS_INA209
@@ -1618,7 +1618,7 @@ config SENSORS_INA2XX The INA2xx driver is configured for the default configuration of the part as described in the datasheet. Default value for Rshunt is 10 mOhms. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called ina2xx. config SENSORS_INA3221
@@ -1629,7 +1629,7 @@ config SENSORS_INA3221 If you say yes here you get support for the TI INA3221 Triple Power Monitor. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called ina3221. config SENSORS_TC74
@@ -1639,7 +1639,7 @@ config SENSORS_TC74 If you say yes here you get support for Microchip TC74 single input temperature sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called tc74. config SENSORS_THMC50
@@ -1649,7 +1649,7 @@ config SENSORS_THMC50 If you say yes here you get support for Texas Instruments THMC50 sensor chips and clones: the Analog Devices ADM1022. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called thmc50. config SENSORS_TMP102
@@ -1660,7 +1660,7 @@ config SENSORS_TMP102 If you say yes here you get support for Texas Instruments TMP102 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called tmp102. config SENSORS_TMP103
@@ -1671,7 +1671,7 @@ config SENSORS_TMP103 If you say yes here you get support for Texas Instruments TMP103 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called tmp103. config SENSORS_TMP108
@@ -1682,7 +1682,7 @@ config SENSORS_TMP108 If you say yes here you get support for Texas Instruments TMP108 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called tmp108. config SENSORS_TMP401
@@ -1692,7 +1692,7 @@ config SENSORS_TMP401 If you say yes here you get support for Texas Instruments TMP401, TMP411, TMP431, TMP432, TMP435, and TMP461 temperature sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called tmp401. config SENSORS_TMP421
@@ -1702,7 +1702,7 @@ config SENSORS_TMP421 If you say yes here you get support for Texas Instruments TMP421, TMP422, TMP423, TMP441, and TMP442 temperature sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called tmp421. config SENSORS_VEXPRESS
@@ -1729,7 +1729,7 @@ config SENSORS_VIA686A If you say yes here you get support for the integrated sensors in Via 686A/B South Bridges. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called via686a. config SENSORS_VT1211
@@ -1740,7 +1740,7 @@ config SENSORS_VT1211 If you say yes here then you get support for hardware monitoring features of the VIA VT1211 Super-I/O chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called vt1211. config SENSORS_VT8231
@@ -1751,7 +1751,7 @@ config SENSORS_VT8231 If you say yes here then you get support for the integrated sensors in the VIA VT8231 device. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called vt8231. config SENSORS_W83773G
@@ -1761,7 +1761,7 @@ config SENSORS_W83773G If you say yes here you get support for the Nuvoton W83773G hardware monitoring chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called w83773g. config SENSORS_W83781D
@@ -1773,7 +1773,7 @@ config SENSORS_W83781D of sensor chips: the W83781D, W83782D and W83783S, and the similar Asus AS99127F. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called w83781d. config SENSORS_W83791D
@@ -1783,7 +1783,7 @@ config SENSORS_W83791D help If you say yes here you get support for the Winbond W83791D chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called w83791d. config SENSORS_W83792D
@@ -1792,7 +1792,7 @@ config SENSORS_W83792D help If you say yes here you get support for the Winbond W83792D chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called w83792d. config SENSORS_W83793
@@ -1804,7 +1804,7 @@ config SENSORS_W83793 hardware monitoring chip, including support for the integrated watchdog. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called w83793. config SENSORS_W83795
@@ -1815,7 +1815,7 @@ config SENSORS_W83795 W83795ADG hardware monitoring chip, including manual fan speed control. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called w83795. config SENSORS_W83795_FANCTRL
@@ -1842,7 +1842,7 @@ config SENSORS_W83L785TS sensor chip, which is used on the Asus A7N8X, among other motherboards. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called w83l785ts. config SENSORS_W83L786NG
@@ -1852,7 +1852,7 @@ config SENSORS_W83L786NG If you say yes here you get support for the Winbond W83L786NG and W83L786NR sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called w83l786ng. config SENSORS_W83627HF
@@ -1864,7 +1864,7 @@ config SENSORS_W83627HF of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and W83697HF. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called w83627hf. config SENSORS_W83627EHF
@@ -1884,7 +1884,7 @@ config SENSORS_W83627EHF This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F (also known as W83667HG-I), and NCT6776F. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called w83627ehf. config SENSORS_WM831X
@@ -1895,7 +1895,7 @@ config SENSORS_WM831X monitoring functionality of the Wolfson Microelectronics WM831x series of PMICs. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called wm831x-hwmon. config SENSORS_WM8350
@@ -1905,7 +1905,7 @@ config SENSORS_WM8350 If you say yes here you get support for the hardware monitoring features of the WM835x series of PMICs. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called wm8350-hwmon. config SENSORS_ULTRA45
Signature · 1 line
2.18.1
Guenter Roeck
maintainerRe: [PATCH 2/2] hwmon: Remove multiple space after dot
Quoted 2 lines · Corentin Labbe
This patch remove extra space after a dot.
Signed-off-by Corentin Labbe <[email protected]>
Marginal ... I think that used to be common style a long time ago. Nevertheless, applied to hwmon-next.
Thanks,
Guenter
Quoted 1,066 lines
--- drivers/hwmon/Kconfig | 236 +++++++++++++++++++++--------------------- 1 file changed, 118 insertions(+), 118 deletions(-)drivers/hwmon/Kconfig +118
-118@@ -11,7 +11,7 @@ menuconfig HWMON of a system. Most modern motherboards include such a device. It can include temperature sensors, voltage sensors, fan speed sensors and various additional features such as the ability to - control the speed of the fans. If you want this support you + control the speed of the fans. If you want this support you should say Y here and also to the specific driver(s) for your sensors chip(s) below.@@ -19,7 +19,7 @@ menuconfig HWMON sensors-detect script from the lm_sensors package. Read <file:Documentation/hwmon/userspace-tools> for details. - This support can also be built as a module. If so, the module + This support can also be built as a module. If so, the module will be called hwmon. if HWMON@@ -46,7 +46,7 @@ config SENSORS_AB8500 AB8500 die and two GPADC channels. The GPADC channel are preferably used to access sensors outside the AB8500 chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called abx500-temp. config SENSORS_ABITUGURU@@ -61,7 +61,7 @@ config SENSORS_ABITUGURU of which motherboards have which revision see Documentation/hwmon/abituguru - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called abituguru. config SENSORS_ABITUGURU3@@ -75,7 +75,7 @@ config SENSORS_ABITUGURU3 2005). For more info and a list of which motherboards have which revision see Documentation/hwmon/abituguru3 - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called abituguru3. config SENSORS_AD7314@@ -116,7 +116,7 @@ config SENSORS_ADM1021 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called adm1021. config SENSORS_ADM1025@@ -127,7 +127,7 @@ config SENSORS_ADM1025 If you say yes here you get support for Analog Devices ADM1025 and Philips NE1619 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called adm1025. config SENSORS_ADM1026@@ -138,7 +138,7 @@ config SENSORS_ADM1026 If you say yes here you get support for Analog Devices ADM1026 sensor chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called adm1026. config SENSORS_ADM1029@@ -149,7 +149,7 @@ config SENSORS_ADM1029 sensor chip. Very rare chip, please let us know you use it. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called adm1029. config SENSORS_ADM1031@@ -159,7 +159,7 @@ config SENSORS_ADM1031 If you say yes here you get support for Analog Devices ADM1031 and ADM1030 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called adm1031. config SENSORS_ADM9240@@ -170,7 +170,7 @@ config SENSORS_ADM9240 If you say yes here you get support for Analog Devices ADM9240, Dallas DS1780, National Semiconductor LM81 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called adm9240. config SENSORS_ADT7X10@@ -242,7 +242,7 @@ config SENSORS_ADT7475 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called adt7475. config SENSORS_ASC7621@@ -255,7 +255,7 @@ config SENSORS_ASC7621 aSC7621 aSC7621a - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called asc7621. config SENSORS_K8TEMP@@ -267,7 +267,7 @@ config SENSORS_K8TEMP microarchitecture. Please note that you will need at least lm-sensors 2.10.1 for proper userspace support. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called k8temp. config SENSORS_K10TEMP@@ -280,7 +280,7 @@ config SENSORS_K10TEMP 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo) and 16h (Kabini/Mullins) microarchitectures. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called k10temp. config SENSORS_FAM15H_POWER@@ -290,7 +290,7 @@ config SENSORS_FAM15H_POWER If you say yes here you get support for processor power information of your AMD family 15h CPU. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called fam15h_power. config SENSORS_APPLESMC@@ -326,7 +326,7 @@ config SENSORS_ARM_SCMI and power sensors available on SCMI based platforms. The actual number and type of sensors exported depend on the platform. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called scmi-hwmon. config SENSORS_ARM_SCPI@@ -346,7 +346,7 @@ config SENSORS_ASB100 If you say yes here you get support for the ASB100 Bach sensor chip found on some Asus mainboards. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called asb100. config SENSORS_ASPEED@@ -371,7 +371,7 @@ config SENSORS_ATXP1 If your board have such a chip, you are able to control your CPU core and other voltages. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called atxp1. config SENSORS_DS620@@ -381,7 +381,7 @@ config SENSORS_DS620 If you say yes here you get support for Dallas Semiconductor DS620 sensor chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called ds620. config SENSORS_DS1621@@ -396,7 +396,7 @@ config SENSORS_DS1621 - Maxim Integrated DS1721 - Maxim Integrated DS1731 - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called ds1621. config SENSORS_DELL_SMM@@ -427,7 +427,7 @@ config SENSORS_DA9055 If you say yes here you get support for ADC on the Dialog Semiconductor DA9055 PMIC. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called da9055-hwmon. config SENSORS_I5K_AMB@@ -448,7 +448,7 @@ config SENSORS_F71805F features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG Super-I/O chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called f71805f. config SENSORS_F71882FG@@ -470,7 +470,7 @@ config SENSORS_F71882FG F81801U F81865F - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called f71882fg. config SENSORS_F75375S@@ -480,7 +480,7 @@ config SENSORS_F75375S If you say yes here you get support for hardware monitoring features of the Fintek F75375S/SP, F75373 and F75387 - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called f75375s. config SENSORS_MC13783_ADC@@ -502,7 +502,7 @@ config SENSORS_FSCHMD fscscy and fscher drivers and adding support for several other FSC sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called fschmd. config SENSORS_FTSTEUTATES@@ -524,7 +524,7 @@ config SENSORS_GL518SM If you say yes here you get support for Genesys Logic GL518SM sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called gl518sm. config SENSORS_GL520SM@@ -535,7 +535,7 @@ config SENSORS_GL520SM If you say yes here you get support for Genesys Logic GL520SM sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called gl520sm. config SENSORS_G760A@@ -545,7 +545,7 @@ config SENSORS_G760A If you say yes here you get support for Global Mixed-mode Technology Inc G760A fan speed PWM controller chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called g760a. config SENSORS_G762@@ -555,7 +555,7 @@ config SENSORS_G762 If you say yes here you get support for Global Mixed-mode Technology Inc G762 and G763 fan speed PWM controller chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called g762. config SENSORS_GPIO_FAN@@ -566,7 +566,7 @@ config SENSORS_GPIO_FAN help If you say yes here you get support for fans connected to GPIO lines. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called gpio-fan. config SENSORS_HIH6130@@ -576,7 +576,7 @@ config SENSORS_HIH6130 If you say yes here you get support for Honeywell Humidicon HIH-6130 and HIH-6131 Humidicon humidity sensors. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called hih6130. config SENSORS_IBMAEM@@ -590,7 +590,7 @@ config SENSORS_IBMAEM the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, and certain HC10/HS2x/LS2x/QS2x blades. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called ibmaem. config SENSORS_IBMPEX@@ -604,7 +604,7 @@ config SENSORS_IBMPEX x3655, and x3755; the x3800, x3850, and x3950 models that have PCI Express; and some of the HS2x, LS2x, and QS2x blades. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called ibmpex. config SENSORS_IBMPOWERNV@@ -656,7 +656,7 @@ config SENSORS_IT87 IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950 clone. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called it87. config SENSORS_JZ4740@@ -680,7 +680,7 @@ config SENSORS_JC42 MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called jc42. config SENSORS_POWR1220@@ -691,7 +691,7 @@ config SENSORS_POWR1220 functions of the Lattice POWR1220 isp Power Supply Monitoring, Sequencing and Margining Controller. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called powr1220. config SENSORS_LINEAGE@@ -702,7 +702,7 @@ config SENSORS_LINEAGE series of DC/DC and AC/DC converters such as CP1800, CP2000AC, CP2000DC, CP2725, and others. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lineage-pem. config SENSORS_LTC2945@@ -803,7 +803,7 @@ config SENSORS_MAX1111 Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 ADC chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called max1111. config SENSORS_MAX16065@@ -819,7 +819,7 @@ config SENSORS_MAX16065 MAX16070 MAX16071 - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called max16065. config SENSORS_MAX1619@@ -828,7 +828,7 @@ config SENSORS_MAX1619 help If you say yes here you get support for MAX1619 sensor chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called max1619. config SENSORS_MAX1668@@ -838,7 +838,7 @@ config SENSORS_MAX1668 If you say yes here you get support for MAX1668, MAX1989 and MAX1805 chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called max1668. config SENSORS_MAX197@@ -881,7 +881,7 @@ config SENSORS_MAX6639 If you say yes here you get support for the MAX6639 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called max6639. config SENSORS_MAX6642@@ -892,7 +892,7 @@ config SENSORS_MAX6642 MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor with Overtemperature Alarm from Maxim. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called max6642. config SENSORS_MAX6650@@ -902,7 +902,7 @@ config SENSORS_MAX6650 If you say yes here you get support for the MAX6650 / MAX6651 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called max6650. config SENSORS_MAX6697@@ -913,7 +913,7 @@ config SENSORS_MAX6697 MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 temperature sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called max6697. config SENSORS_MAX31790@@ -923,7 +923,7 @@ config SENSORS_MAX31790 If you say yes here you get support for 6-Channel PWM-Output Fan RPM Controller. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called max31790. config SENSORS_MCP3021@@ -934,7 +934,7 @@ config SENSORS_MCP3021 The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 with 12-bit resolution. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called mcp3021. config SENSORS_MLXREG_FAN@@ -957,7 +957,7 @@ config SENSORS_TC654 The TC654 and TC655 are PWM mode fan speed controllers with FanSense technology for use with brushless DC fans. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called tc654. config SENSORS_MENF21BMC_HWMON@@ -983,7 +983,7 @@ config SENSORS_ADCXX Examples : ADC081S101, ADC124S501, ... - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called adcxx. config SENSORS_LM63@@ -996,7 +996,7 @@ config SENSORS_LM63 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among others. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm63. config SENSORS_LM70@@ -1007,7 +1007,7 @@ config SENSORS_LM70 LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera- ture sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm70. config SENSORS_LM73@@ -1016,7 +1016,7 @@ config SENSORS_LM73 help If you say yes here you get support for National Semiconductor LM73 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm73. config SENSORS_LM75@@ -1046,7 +1046,7 @@ config SENSORS_LM75 that with some chips which don't replicate LM75 quirks exactly, you may need the "force" module parameter. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm75. config SENSORS_LM77@@ -1056,7 +1056,7 @@ config SENSORS_LM77 If you say yes here you get support for National Semiconductor LM77 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm77. config SENSORS_LM78@@ -1067,7 +1067,7 @@ config SENSORS_LM78 If you say yes here you get support for National Semiconductor LM78, LM78-J and LM79. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm78. config SENSORS_LM80@@ -1077,7 +1077,7 @@ config SENSORS_LM80 If you say yes here you get support for National Semiconductor LM80 and LM96080 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm80. config SENSORS_LM83@@ -1087,7 +1087,7 @@ config SENSORS_LM83 If you say yes here you get support for National Semiconductor LM82 and LM83 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm83. config SENSORS_LM85@@ -1099,7 +1099,7 @@ config SENSORS_LM85 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, EMC6D101, EMC6D102, and EMC6D103. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm85. config SENSORS_LM87@@ -1110,7 +1110,7 @@ config SENSORS_LM87 If you say yes here you get support for National Semiconductor LM87 and Analog Devices ADM1024 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm87. config SENSORS_LM90@@ -1124,7 +1124,7 @@ config SENSORS_LM90 Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, GMT G781, and Texas Instruments TMP451 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm90. config SENSORS_LM92@@ -1134,7 +1134,7 @@ config SENSORS_LM92 If you say yes here you get support for National Semiconductor LM92 and Maxim MAX6635 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm92. config SENSORS_LM93@@ -1145,7 +1145,7 @@ config SENSORS_LM93 If you say yes here you get support for National Semiconductor LM93, LM94, and compatible sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm93. config SENSORS_LM95234@@ -1155,7 +1155,7 @@ config SENSORS_LM95234 If you say yes here you get support for the LM95233 and LM95234 temperature sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm95234. config SENSORS_LM95241@@ -1165,7 +1165,7 @@ config SENSORS_LM95241 If you say yes here you get support for LM95231 and LM95241 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm95241. config SENSORS_LM95245@@ -1176,7 +1176,7 @@ config SENSORS_LM95245 If you say yes here you get support for LM95235 and LM95245 temperature sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called lm95245. config SENSORS_PC87360@@ -1190,7 +1190,7 @@ config SENSORS_PC87360 control. The PC87365 and PC87366 additionally have voltage and temperature monitoring. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called pc87360. config SENSORS_PC87427@@ -1204,7 +1204,7 @@ config SENSORS_PC87427 monitoring. Fan speed monitoring and control are supported, as well as temperature monitoring. Voltages aren't supported yet. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called pc87427. config SENSORS_NTC_THERMISTOR@@ -1220,7 +1220,7 @@ config SENSORS_NTC_THERMISTOR NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333, NCP03WF104 and NCP15XH103 from Murata and B57330V2103 from EPCOS. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called ntc-thermistor. config SENSORS_NCT6683@@ -1230,7 +1230,7 @@ config SENSORS_NCT6683 If you say yes here you get support for the hardware monitoring functionality of the Nuvoton NCT6683D eSIO chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called nct6683. config SENSORS_NCT6775@@ -1244,7 +1244,7 @@ config SENSORS_NCT6775 Super-I/O chips. This driver replaces the w83627ehf driver for NCT6775F and NCT6776F. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called nct6775. config SENSORS_NCT7802@@ -1255,7 +1255,7 @@ config SENSORS_NCT7802 If you say yes here you get support for the Nuvoton NCT7802Y hardware monitoring chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called nct7802. config SENSORS_NCT7904@@ -1265,7 +1265,7 @@ config SENSORS_NCT7904 If you say yes here you get support for the Nuvoton NCT7904 hardware monitoring chip, including manual fan speed control. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called nct7904. config SENSORS_NPCM7XX@@ -1302,11 +1302,11 @@ config SENSORS_PCF8591 If you say yes here you get support for Philips PCF8591 4-channel ADC, 1-channel DAC chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called pcf8591. These devices are hard to detect and rarely found on mainstream - hardware. If unsure, say N. + hardware. If unsure, say N. source drivers/hwmon/pmbus/Kconfig@@ -1319,7 +1319,7 @@ config SENSORS_PWM_FAN The driver uses the generic PWM interface, thus it will work on a variety of SoCs. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called pwm-fan. config SENSORS_RASPBERRYPI_HWMON@@ -1340,7 +1340,7 @@ config SENSORS_SHT15 If you say yes here you get support for the Sensiron SHT10, SHT11, SHT15, SHT71, SHT75 humidity and temperature sensors. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called sht15. config SENSORS_SHT21@@ -1350,7 +1350,7 @@ config SENSORS_SHT21 If you say yes here you get support for the Sensiron SHT21, SHT25 humidity and temperature sensors. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called sht21. config SENSORS_SHT3x@@ -1361,7 +1361,7 @@ config SENSORS_SHT3x If you say yes here you get support for the Sensiron SHT30 and SHT31 humidity and temperature sensors. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called sht3x. config SENSORS_SHTC1@@ -1371,7 +1371,7 @@ config SENSORS_SHTC1 If you say yes here you get support for the Sensiron SHTC1 and SHTW1 humidity and temperature sensors. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called shtc1. config SENSORS_S3C@@ -1398,7 +1398,7 @@ config SENSORS_SIS5595 If you say yes here you get support for the integrated sensors in SiS5595 South Bridges. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called sis5595. config SENSORS_DME1737@@ -1410,7 +1410,7 @@ config SENSORS_DME1737 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and Asus A8000 Super-I/O chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called dme1737. config SENSORS_EMC1403@@ -1431,7 +1431,7 @@ config SENSORS_EMC2103 If you say yes here you get support for the temperature and fan sensors of the SMSC EMC2103 chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called emc2103. config SENSORS_EMC6W201@@ -1441,7 +1441,7 @@ config SENSORS_EMC6W201 If you say yes here you get support for the SMSC EMC6W201 hardware monitoring chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called emc6w201. config SENSORS_SMSC47M1@@ -1458,7 +1458,7 @@ config SENSORS_SMSC47M1 driver, select also "SMSC LPC47M192 and compatibles" below for those. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called smsc47m1. config SENSORS_SMSC47M192@@ -1475,7 +1475,7 @@ config SENSORS_SMSC47M192 "SMSC LPC47M10x and compatibles" above. You need both drivers if you want fan control and voltage/temperature sensor support. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called smsc47m192. config SENSORS_SMSC47B397@@ -1485,7 +1485,7 @@ config SENSORS_SMSC47B397 If you say yes here you get support for the SMSC LPC47B397-NC sensor chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called smsc47b397. config SENSORS_SCH56XX_COMMON@@ -1501,7 +1501,7 @@ config SENSORS_SCH5627 features of the SMSC SCH5627 Super-I/O chip including support for the integrated watchdog. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called sch5627. config SENSORS_SCH5636@@ -1519,7 +1519,7 @@ config SENSORS_SCH5636 Theseus' hardware monitoring features including support for the integrated watchdog. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called sch5636. config SENSORS_STTS751@@ -1529,7 +1529,7 @@ config SENSORS_STTS751 If you say yes here you get support for STTS751 temperature sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called stts751. config SENSORS_SMM665@@ -1563,7 +1563,7 @@ config SENSORS_ADS1015 If you say yes here you get support for Texas Instruments ADS1015/ADS1115 12/16-bit 4-input ADC device. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called ads1015. config SENSORS_ADS7828@@ -1575,7 +1575,7 @@ config SENSORS_ADS7828 ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while it is 8-bit on ADS7830. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called ads7828. config SENSORS_ADS7871@@ -1584,7 +1584,7 @@ config SENSORS_ADS7871 help If you say yes here you get support for TI ADS7871 & ADS7870 - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called ads7871. config SENSORS_AMC6821@@ -1594,7 +1594,7 @@ config SENSORS_AMC6821 If you say yes here you get support for the Texas Instruments AMC6821 hardware monitoring chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called amc6821. config SENSORS_INA209@@ -1618,7 +1618,7 @@ config SENSORS_INA2XX The INA2xx driver is configured for the default configuration of the part as described in the datasheet. Default value for Rshunt is 10 mOhms. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called ina2xx. config SENSORS_INA3221@@ -1629,7 +1629,7 @@ config SENSORS_INA3221 If you say yes here you get support for the TI INA3221 Triple Power Monitor. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called ina3221. config SENSORS_TC74@@ -1639,7 +1639,7 @@ config SENSORS_TC74 If you say yes here you get support for Microchip TC74 single input temperature sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called tc74. config SENSORS_THMC50@@ -1649,7 +1649,7 @@ config SENSORS_THMC50 If you say yes here you get support for Texas Instruments THMC50 sensor chips and clones: the Analog Devices ADM1022. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called thmc50. config SENSORS_TMP102@@ -1660,7 +1660,7 @@ config SENSORS_TMP102 If you say yes here you get support for Texas Instruments TMP102 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called tmp102. config SENSORS_TMP103@@ -1671,7 +1671,7 @@ config SENSORS_TMP103 If you say yes here you get support for Texas Instruments TMP103 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called tmp103. config SENSORS_TMP108@@ -1682,7 +1682,7 @@ config SENSORS_TMP108 If you say yes here you get support for Texas Instruments TMP108 sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called tmp108. config SENSORS_TMP401@@ -1692,7 +1692,7 @@ config SENSORS_TMP401 If you say yes here you get support for Texas Instruments TMP401, TMP411, TMP431, TMP432, TMP435, and TMP461 temperature sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called tmp401. config SENSORS_TMP421@@ -1702,7 +1702,7 @@ config SENSORS_TMP421 If you say yes here you get support for Texas Instruments TMP421, TMP422, TMP423, TMP441, and TMP442 temperature sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called tmp421. config SENSORS_VEXPRESS@@ -1729,7 +1729,7 @@ config SENSORS_VIA686A If you say yes here you get support for the integrated sensors in Via 686A/B South Bridges. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called via686a. config SENSORS_VT1211@@ -1740,7 +1740,7 @@ config SENSORS_VT1211 If you say yes here then you get support for hardware monitoring features of the VIA VT1211 Super-I/O chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called vt1211. config SENSORS_VT8231@@ -1751,7 +1751,7 @@ config SENSORS_VT8231 If you say yes here then you get support for the integrated sensors in the VIA VT8231 device. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called vt8231. config SENSORS_W83773G@@ -1761,7 +1761,7 @@ config SENSORS_W83773G If you say yes here you get support for the Nuvoton W83773G hardware monitoring chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called w83773g. config SENSORS_W83781D@@ -1773,7 +1773,7 @@ config SENSORS_W83781D of sensor chips: the W83781D, W83782D and W83783S, and the similar Asus AS99127F. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called w83781d. config SENSORS_W83791D@@ -1783,7 +1783,7 @@ config SENSORS_W83791D help If you say yes here you get support for the Winbond W83791D chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called w83791d. config SENSORS_W83792D@@ -1792,7 +1792,7 @@ config SENSORS_W83792D help If you say yes here you get support for the Winbond W83792D chip. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called w83792d. config SENSORS_W83793@@ -1804,7 +1804,7 @@ config SENSORS_W83793 hardware monitoring chip, including support for the integrated watchdog. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called w83793. config SENSORS_W83795@@ -1815,7 +1815,7 @@ config SENSORS_W83795 W83795ADG hardware monitoring chip, including manual fan speed control. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called w83795. config SENSORS_W83795_FANCTRL@@ -1842,7 +1842,7 @@ config SENSORS_W83L785TS sensor chip, which is used on the Asus A7N8X, among other motherboards. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called w83l785ts. config SENSORS_W83L786NG@@ -1852,7 +1852,7 @@ config SENSORS_W83L786NG If you say yes here you get support for the Winbond W83L786NG and W83L786NR sensor chips. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called w83l786ng. config SENSORS_W83627HF@@ -1864,7 +1864,7 @@ config SENSORS_W83627HF of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and W83697HF. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called w83627hf. config SENSORS_W83627EHF@@ -1884,7 +1884,7 @@ config SENSORS_W83627EHF This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F (also known as W83667HG-I), and NCT6776F. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called w83627ehf. config SENSORS_WM831X@@ -1895,7 +1895,7 @@ config SENSORS_WM831X monitoring functionality of the Wolfson Microelectronics WM831x series of PMICs. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called wm831x-hwmon. config SENSORS_WM8350@@ -1905,7 +1905,7 @@ config SENSORS_WM8350 If you say yes here you get support for the hardware monitoring features of the WM835x series of PMICs. - This driver can also be built as a module. If so, the module + This driver can also be built as a module. If so, the module will be called wm8350-hwmon. config SENSORS_ULTRA45
Re: [PATCH 2/2] hwmon: Remove multiple space after dot
In reply to Corentin LabbeQuoted 1 line · Corentin Labbe
This patch remove extra space after a dot.
[]
drivers/hwmon/Kconfig
Quoted 1 line
drivers/hwmon/Kconfig +0
-0
---
Quoted 2 lines
drivers/hwmon/Kconfig | 236 +++++++++++++++++++++--------------------- 1 file changed, 118 insertions(+), 118 deletions(-)
[]
drivers/hwmon/Kconfig menuconfig HWMON · line 16
Quoted 8 lines
drivers/hwmon/Kconfig +1
-1@@ -11,7 +11,7 @@ menuconfig HWMON of a system. Most modern motherboards include such a device. It can include temperature sensors, voltage sensors, fan speed sensors and various additional features such as the ability to - control the speed of the fans. If you want this support you + control the speed of the fans. If you want this support you should say Y here and also to the specific driver(s) for your sensors chip(s) below.
Please no.
You can't pry two spaces after a period when using a fixed width font from me.
And the use is nowhere consistent in the kernel as it's less than 2:1 in favor of one style over the other.
$ git grep -i '[a-z][a-z]\. [a-z][a-z ]' | wc -l 146888 $ git grep -i '[a-z][a-z]\. [a-z][a-z ]' | wc -l 85195
The kernel Kconfig use ratio is similar.
$ git grep -i '[a-z][a-z]\. [a-z][a-z ]' -- '*/Kconfig*' | wc -l 5389 $ git grep -i '[a-z][a-z]\. [a-z][a-z ]' -- '*/Kconfig*' | wc -l 2463
And even in this specific file, it's reversed ratio
$ git grep -i '[a-z][a-z]\. [a-z][a-z ]' -- 'drivers/hwmon/Kconfig*' | wc -l 70 $ git grep -i '[a-z][a-z]\. [a-z][a-z ]' -- 'drivers/hwmon/Kconfig*' | wc -l 129
So if you _really_ wanted to do this, please do the entire file consistently.
You seemed to do 118 conversions. Shouldn't there be 129?
Re: [PATCH 2/2] hwmon: Remove multiple space after dot
Quoted 8 lines · Joe Perches
Quoted 1 line · Corentin Labbe
This patch remove extra space after a dot.
[]
drivers/hwmon/Kconfig
Quoted 1 line
drivers/hwmon/Kconfig +0
-0---
Quoted 2 lines
drivers/hwmon/Kconfig | 236 +++++++++++++++++++++--------------------- 1 file changed, 118 insertions(+), 118 deletions(-)[]
Quoted 10 lines
drivers/hwmon/Kconfig menuconfig HWMON · line 16
Quoted 8 lines
drivers/hwmon/Kconfig +1
-1@@ -11,7 +11,7 @@ menuconfig HWMON of a system. Most modern motherboards include such a device. It can include temperature sensors, voltage sensors, fan speed sensors and various additional features such as the ability to - control the speed of the fans. If you want this support you + control the speed of the fans. If you want this support you should say Y here and also to the specific driver(s) for your sensors chip(s) below.Please no.
Ack. No need for such a patch.
Signature · 1 line
~Randy
Quoted 3 lines · Corentin Labbe
This patch fix a typo where build is used instead of built.
Signed-off-by Corentin Labbe <[email protected]>
Applied to hwmon-next.
Thanks,
Guenter
Quoted 44 lines
--- drivers/hwmon/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)drivers/hwmon/Kconfig +4
-4@@ -179,7 +179,7 @@ config SENSORS_ADT7X10 This module contains common code shared by the ADT7310/ADT7320 and ADT7410/ADT7420 temperature monitoring chip drivers. - If build as a module, the module will be called adt7x10. + If built as a module, the module will be called adt7x10. config SENSORS_ADT7310 tristate "Analog Devices ADT7310/ADT7320"@@ -242,7 +242,7 @@ config SENSORS_ADT7475 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring chips. - This driver can also be build as a module. If so, the module + This driver can also be built as a module. If so, the module will be called adt7475. config SENSORS_ASC7621@@ -666,7 +666,7 @@ config SENSORS_JZ4740 If you say yes here you get support for reading adc values from the ADCIN pin on Ingenic JZ4740 SoC based boards. - This driver can also be build as a module. If so, the module will be + This driver can also be built as a module. If so, the module will be called jz4740-hwmon. config SENSORS_JC42@@ -1594,7 +1594,7 @@ config SENSORS_AMC6821 If you say yes here you get support for the Texas Instruments AMC6821 hardware monitoring chips. - This driver can also be build as a module. If so, the module + This driver can also be built as a module. If so, the module will be called amc6821. config SENSORS_INA209