Skip to contentSkip to conversation

Kconfig: Add entry for VF610 NAND NFC device tree aware driver

PATCH New Lukasz Majewski 2 participants 4 messages Dec 3, 2018

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 Kconfig: Add entry for VF610 NAND NFC device tree aware driver

This commit provides code to add proper entry to Kconfig to enable support for VF610 device tree aware driver.

---

 drivers/mtd/nand/raw/Kconfig | 11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/mtd/nand/raw/Kconfig +11 -0
index 008f7b4b4b..fd1723feda 100644
@@ -88,6 +88,15 @@ config NAND_VF610_NFC
 	  The driver supports a maximum 2k page size. The driver
 	  currently does not support hardware ECC.
 
+if NAND_VF610_NFC
+
+config NAND_VF610_NFC_DT
+        bool "Support Vybrid's vf610 NAND controller as a DT device"
+        depends on OF_CONTROL && MTD
+        help
+          Enable the driver for Vybrid's vf610 NAND flash on platforms
+	  using device tree.
+
 choice
 	prompt "Hardware ECC strength"
 	depends on NAND_VF610_NFC
@@ -103,6 +112,8 @@ config SYS_NAND_VF610_NFC_60_ECC_BYTES
 
 endchoice
 
+endif
+
 config NAND_PXA3XX
 	bool "Support for NAND on PXA3xx and Armada 370/XP/38x"
 	select SYS_NAND_SELF_INIT
Signature · 1 line
2.11.0
#1 lore raw

PATCH 2/2 nand: vybrid: Extend the vf610 NFC NAND driver to support device tree (and DM)

This commit adds support for device tree and enumeration via device model for the Vybrid's NFC NAND driver.

---

 drivers/mtd/nand/raw/vf610_nfc.c | 47 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)
drivers/mtd/nand/raw/vf610_nfc.c +47 -0
index 619d0403e9..fce7e5f299 100644
@@ -31,6 +31,11 @@
 #include <nand.h>
 #include <errno.h>
 #include <asm/io.h>
+#if CONFIG_NAND_VF610_NFC_DT
+#include <dm.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#endif
 
 /* Register Offsets */
 #define NFC_FLASH_CMD1			0x3F00
@@ -760,9 +765,51 @@ error:
 	return err;
 }
 
+#if CONFIG_NAND_VF610_NFC_DT
+static const struct udevice_id vf610_nfc_dt_ids[] = {
+	{
+		.compatible = "fsl,vf610-nfc",
+	},
+	{ /* sentinel */ }
+};
+
+static int vf610_nfc_dt_probe(struct udevice *dev)
+{
+	struct resource res;
+	int ret;
+
+	ret = dev_read_resource(dev, 0, &res);
+	if (ret)
+		return ret;
+
+	return vf610_nfc_nand_init(0, devm_ioremap(dev, res.start,
+						   resource_size(&res)));
+}
+
+U_BOOT_DRIVER(vf610_nfc_dt) = {
+	.name = "vf610-nfc-dt",
+	.id = UCLASS_MTD,
+	.of_match = vf610_nfc_dt_ids,
+	.probe = vf610_nfc_dt_probe,
+};
+
+void board_nand_init(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	ret = uclass_get_device_by_driver(UCLASS_MTD,
+					  DM_GET_DRIVER(vf610_nfc_dt),
+					  &dev);
+	if (ret && ret != -ENODEV)
+		pr_err("Failed to initialize NAND controller. (error %d)\n",
+		       ret);
+}
+#else
 void board_nand_init(void)
 {
 	int err = vf610_nfc_nand_init(0, (void __iomem *)CONFIG_SYS_NAND_BASE);
 	if (err)
 		printf("VF610 NAND init failed (err %d)\n", err);
 }
+#endif /* CONFIG_NAND_VF610_NFC_DT */
Signature · 1 line
2.11.0
maintainer
#2 lore raw

PATCH 1/2 Kconfig: Add entry for VF610 NAND NFC device tree aware driver

In reply to Lukasz Majewski
Quoted 2 lines · Lukasz Majewski

This commit provides code to add proper entry to Kconfig to enable support for VF610 device tree aware driver.

Looks like a start, but ideally we should also move all the board/system specific properties to device-tree (e.g. CONFIG_SYS_NAND_VF610_NFC_45_ECC_BYTES).

--
Stefan

Quoted 37 lines

---

 drivers/mtd/nand/raw/Kconfig | 11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/mtd/nand/raw/Kconfig +11 -0
index 008f7b4b4b..fd1723feda 100644
@@ -88,6 +88,15 @@ config NAND_VF610_NFC
 	  The driver supports a maximum 2k page size. The driver
 	  currently does not support hardware ECC.
 
+if NAND_VF610_NFC
+
+config NAND_VF610_NFC_DT
+        bool "Support Vybrid's vf610 NAND controller as a DT device"
+        depends on OF_CONTROL && MTD
+        help
+          Enable the driver for Vybrid's vf610 NAND flash on platforms
+	  using device tree.
+
 choice
 	prompt "Hardware ECC strength"
 	depends on NAND_VF610_NFC
@@ -103,6 +112,8 @@ config SYS_NAND_VF610_NFC_60_ECC_BYTES
 
 endchoice
 
+endif
+
 config NAND_PXA3XX
 	bool "Support for NAND on PXA3xx and Armada 370/XP/38x"
 	select SYS_NAND_SELF_INIT
#3 lore raw

PATCH 1/2 Kconfig: Add entry for VF610 NAND NFC device tree aware driver

Hi Stefan,

Quoted 5 lines · Lukasz Majewski
Quoted 2 lines

This commit provides code to add proper entry to Kconfig to enable support for VF610 device tree aware driver.

Looks like a start,

Indeed - this is a start. Vybrid is a bit behind the current u-boot peace of development.

I'm trying to give it some momentum.

Quoted 3 lines

but ideally we should also move all the board/system specific properties to device-tree (e.g. CONFIG_SYS_NAND_VF610_NFC_45_ECC_BYTES).

Yes, that would be a long term goal. However, those configs are already moved to Kconfig, so there is no urgent need to make the conversion now.

Quoted 36 lines

--
Stefan

Quoted 32 lines

---

 drivers/mtd/nand/raw/Kconfig | 11 +++++++++++
 1 file changed, 11 insertions(+)
(quoted diff) +0 -0

b/drivers/mtd/nand/raw/Kconfig index 008f7b4b4b..fd1723feda 100644

drivers/mtd/nand/raw/Kconfig +4 -0
@@ -88,6 +88,15 @@ config NAND_VF610_NFC
 	  The driver supports a maximum 2k page size. The driver
 	  currently does not support hardware ECC.
 
+if NAND_VF610_NFC
+
+config NAND_VF610_NFC_DT
+        bool "Support Vybrid's vf610 NAND controller as a DT

device"

drivers/mtd/nand/raw/Kconfig +3 -0
+        depends on OF_CONTROL && MTD
+        help
+          Enable the driver for Vybrid's vf610 NAND flash on

platforms

drivers/mtd/nand/raw/Kconfig +2 -0
+	  using device tree.
+
 choice
 	prompt "Hardware ECC strength"
 	depends on NAND_VF610_NFC
@@ -103,6 +112,8 @@ config SYS_NAND_VF610_NFC_60_ECC_BYTES
 
Quoted 7 lines

drivers/mtd/nand/raw/Kconfig config SYS_NAND_VF610_NFC_60_ECC_BYTES · line 119

Quoted 7 lines
drivers/mtd/nand/raw/Kconfig +2 -0
 endchoice
 
+endif
+
 config NAND_PXA3XX
 	bool "Support for NAND on PXA3xx and Armada 370/XP/38x"
 	select SYS_NAND_SELF_INIT  

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181203/e687526e/attachment.sig>