Skip to contentSkip to conversation

QE: ls1043a: modify CONFIG_SYS_QE_FW_ADDR to (512*4A00) in SD Card

PATCH New Zhao Qiang 2 participants 2 messages Dec 5, 2018 – Feb 20, 2019

lore
Share & tools
lore

Zhao Qiang

author
#0 lore raw

PATCH 1/1 QE: ls1043a: modify CONFIG_SYS_QE_FW_ADDR to (512*4A00) in SD Card

Due to the new layout of Layerscape series, move the QE firmware to address (512*4A00) in SD Card.

---
 include/configs/ls1043a_common.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
include/configs/ls1043a_common.h +1 -1
index 4279d53..62ac915 100644
@@ -194,7 +194,7 @@
  */
 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 #define CONFIG_SYS_FMAN_FW_ADDR		(512 * 0x4800)
-#define CONFIG_SYS_QE_FW_ADDR		(512 * 0x4a08)
+#define CONFIG_SYS_QE_FW_ADDR		(512 * 0x4A00)
 #elif defined(CONFIG_QSPI_BOOT)
 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 #define CONFIG_SYS_FMAN_FW_ADDR		0x40900000
Signature · 1 line
1.7.1
#1 lore raw

PATCH 1/1 QE: ls1043a: modify CONFIG_SYS_QE_FW_ADDR to (512*4A00) in SD Card

Quoted 9 lines

-----Original Message-----
From: U-Boot <[email protected]> On Behalf Of Zhao Qiang
Sent: Wednesday, December 5, 2018 2:32 PM
To: York Sun <[email protected]>
Cc: u-boot at lists.denx.de
Subject: [U-Boot] [PATCH] QE: ls1043a: modify CONFIG_SYS_QE_FW_ADDR to (512*4A00) in SD Card

Quoted 4 lines

Due to the new layout of Layerscape series, move the QE firmware to address (512*4A00) in SD Card.

This patch been applied to fsl-qoriq master, awaiting upstream.

--pk