Skip to contentSkip to conversation

More fully implement ARM PMUv3

PATCH Superseded Aaron Lindsay 3 participants 22 messages Dec 5, 2018 – Dec 11, 2018

v9 of 12 Superseded Latest is v12 →

lore
Share & tools
lore
#0 lore raw

v9 cover More fully implement ARM PMUv3

The ARM PMU implementation currently contains a basic cycle counter, but it is often useful to gather counts of other events, filter them based on execution mode, and/or be notified on counter overflow. These patches flesh out the implementations of various PMU registers including PM[X]EVCNTR and PM[X]EVTYPER, add a struct definition to represent arbitrary counter types, implement mode filtering, send interrupts on counter overflow, and add instruction, cycle, and software increment events.

Since v8 [1] I have made the following changes:
* Simplified if statements and corrected overflow bit clearing logic in counter overflow patch based on Richard's review
* Added FIELDs for ARMv8.1 PMUv3 variant and guard the definition of PMCEID2 and PMCEID3 based on ID_DFR0.PerfMon
* Added/fixed up a couple comments

[1] - https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg04037.html

Aaron Lindsay (14):
migration: Add post_save function to VMStateDescription target/arm: Reorganize PMCCNTR accesses
target/arm: Swap PMU values before/after migrations target/arm: Filter cycle counter based on PMCCFILTR_EL0 target/arm: Allow AArch32 access for PMCCFILTR target/arm: Implement PMOVSSET
target/arm: Define FIELDs for ID_DFR0
target/arm: Make PMCEID[01]_EL0 64 bit registers, add PMCEID[23] target/arm: Add array for supported PMU events, generate

    PMCEID[01]_EL0

target/arm: Finish implementation of PM[X]EVCNTR and PM[X]EVTYPER target/arm: PMU: Add instruction and cycle events target/arm: PMU: Set PMCR.N to 4
target/arm: Implement PMSWINC
target/arm: Send interrupts on PMU counter overflow

 docs/devel/migration.rst    |   9 +-
 include/migration/vmstate.h |   1 +
 migration/vmstate.c         |  13 +-
 target/arm/cpu.c            |  28 +-
 target/arm/cpu.h            |  79 +++-
 target/arm/cpu64.c          |   4 -
 target/arm/helper.c         | 807 ++++++++++++++++++++++++++++++++----
 target/arm/machine.c        |  24 ++
 8 files changed, 860 insertions(+), 105 deletions(-)
Signature · 1 line
2.19.1
#1 lore raw

PATCH v9 1/14 migration: Add post_save function to VMStateDescription

In some cases it may be helpful to modify state before saving it for migration, and then modify the state back after it has been saved. The existing pre_save function provides half of this functionality. This patch adds a post_save function to provide the second half.

---
 docs/devel/migration.rst    |  9 +++++++--
 include/migration/vmstate.h |  1 +
 migration/vmstate.c         | 13 ++++++++++++-
 3 files changed, 20 insertions(+), 3 deletions(-)
docs/devel/migration.rst +7 -2
index e7658ab050..220059679a 100644
@@ -419,8 +419,13 @@ The functions to do that are inside a vmstate definition, and are called:
 
   This function is called before we save the state of one device.
 
-Example: You can look at hpet.c, that uses the three function to
-massage the state that is transferred.
+- ``int (*post_save)(void *opaque);``
+
+  This function is called after we save the state of one device
+  (even upon failure, unless the call to pre_save returned an error).
+
+Example: You can look at hpet.c, that uses the first three functions
+to massage the state that is transferred.
 
 The ``VMSTATE_WITH_TMP`` macro may be useful when the migration
 data doesn't match the stored device data well; it allows an
include/migration/vmstate.h +1 -0
index 61bef3ef5c..067b126cf1 100644
@@ -185,6 +185,7 @@ struct VMStateDescription {
     int (*pre_load)(void *opaque);
     int (*post_load)(void *opaque, int version_id);
     int (*pre_save)(void *opaque);
+    int (*post_save)(void *opaque);
     bool (*needed)(void *opaque);
     const VMStateField *fields;
     const VMStateDescription **subsections;
migration/vmstate.c +12 -1
index 80b59009aa..e2bbb7b5f7 100644
@@ -390,6 +390,9 @@ int vmstate_save_state_v(QEMUFile *f, const VMStateDescription *vmsd,
                 if (ret) {
                     error_report("Save of field %s/%s failed",
                                  vmsd->name, field->name);
+                    if (vmsd->post_save) {
+                        vmsd->post_save(opaque);
+                    }
                     return ret;
                 }
 
@@ -415,7 +418,15 @@ int vmstate_save_state_v(QEMUFile *f, const VMStateDescription *vmsd,
         json_end_array(vmdesc);
     }
 
-    return vmstate_subsection_save(f, vmsd, opaque, vmdesc);
+    ret = vmstate_subsection_save(f, vmsd, opaque, vmdesc);
+
+    if (vmsd->post_save) {
+        int ps_ret = vmsd->post_save(opaque);
+        if (!ret) {
+            ret = ps_ret;
+        }
+    }
+    return ret;
 }
 
 static const VMStateDescription *
Signature · 1 line
2.19.1
#2 lore raw

PATCH v9 2/14 target/arm: Reorganize PMCCNTR accesses

In reply to Aaron Lindsay

pmccntr_read and pmccntr_write contained duplicate code that was already being handled by pmccntr_sync. Consolidate the duplicated code into two
functions: pmccntr_op_start and pmccntr_op_finish. Add a companion to c15_ccnt in CPUARMState so that we can simultaneously save both the architectural register value and the last underlying cycle count - this ensures time isn't lost and will also allow us to access the 'old' architectural register value in order to detect overflows in later patches.

---
 target/arm/cpu.h    |  37 ++++++++++----
 target/arm/helper.c | 114 +++++++++++++++++++++++++++-----------------
 2 files changed, 98 insertions(+), 53 deletions(-)
target/arm/cpu.h +29 -8
index 2a73fed9a0..61ac458627 100644
@@ -468,10 +468,20 @@ typedef struct CPUARMState {
         uint64_t oslsr_el1; /* OS Lock Status */
         uint64_t mdcr_el2;
         uint64_t mdcr_el3;
-        /* If the counter is enabled, this stores the last time the counter
-         * was reset. Otherwise it stores the counter value
+        /* Stores the architectural value of the counter *the last time it was
+         * updated* by pmccntr_op_start. Accesses should always be surrounded
+         * by pmccntr_op_start/pmccntr_op_finish to guarantee the latest
+         * architecturally-correct value is being read/set.
          */
         uint64_t c15_ccnt;
+        /* Stores the delta between the architectural value and the underlying
+         * cycle count during normal operation. It is used to update c15_ccnt
+         * to be the correct architectural value before accesses. During
+         * accesses, c15_ccnt_delta contains the underlying count being used
+         * for the access, after which it reverts to the delta value in
+         * pmccntr_op_finish.
+         */
+        uint64_t c15_ccnt_delta;
         uint64_t pmccfiltr_el0; /* Performance Monitor Filter Register */
         uint64_t vpidr_el2; /* Virtualization Processor ID Register */
         uint64_t vmpidr_el2; /* Virtualization Multiprocessor ID Register */
@@ -956,15 +966,26 @@ int cpu_arm_signal_handler(int host_signum, void *pinfo,
                            void *puc);
 
 /**
- * pmccntr_sync
+ * pmccntr_op_start/finish
+ * @env: CPUARMState
+ *
+ * Convert the counter in the PMCCNTR between its delta form (the typical mode
+ * when it's enabled) and the guest-visible value. These two calls must always
+ * surround any action which might affect the counter.
+ */
+void pmccntr_op_start(CPUARMState *env);
+void pmccntr_op_finish(CPUARMState *env);
+
+/**
+ * pmu_op_start/finish
  * @env: CPUARMState
  *
- * Synchronises the counter in the PMCCNTR. This must always be called twice,
- * once before any action that might affect the timer and again afterwards.
- * The function is used to swap the state of the register if required.
- * This only happens when not in user mode (!CONFIG_USER_ONLY)
+ * Convert all PMU counters between their delta form (the typical mode when
+ * they are enabled) and the guest-visible values. These two calls must
+ * surround any action which might affect the counters.
  */
-void pmccntr_sync(CPUARMState *env);
+void pmu_op_start(CPUARMState *env);
+void pmu_op_finish(CPUARMState *env);
 
 /* SCTLR bit meanings. Several bits have been reused in newer
  * versions of the architecture; in that case we define constants
target/arm/helper.c +69 -45

161 lines not on this page · raw message

Signature · 1 line
2.19.1
#3 lore raw

PATCH v9 3/14 target/arm: Swap PMU values before/after migrations

In reply to Aaron Lindsay

Because of the PMU's design, many register accesses have side effects which are inter-related, meaning that the normal method of saving CP registers can result in inconsistent state. These side-effects are largely handled in pmu_op_start/finish functions which can be called before and after the state is saved/restored. By doing this and adding raw read/write functions for the affected registers, we avoid migration-related inconsistencies.

---
 target/arm/helper.c  |  6 ++++--
 target/arm/machine.c | 24 ++++++++++++++++++++++++
 2 files changed, 28 insertions(+), 2 deletions(-)
target/arm/helper.c +4 -2
index 497907fc79..71a5c71e0a 100644
@@ -1450,11 +1450,13 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 0,
       .access = PL0_RW, .accessfn = pmreg_access_ccntr,
       .type = ARM_CP_IO,
-      .readfn = pmccntr_read, .writefn = pmccntr_write, },
+      .fieldoffset = offsetof(CPUARMState, cp15.c15_ccnt),
+      .readfn = pmccntr_read, .writefn = pmccntr_write,
+      .raw_readfn = raw_read, .raw_writefn = raw_write, },
 #endif
     { .name = "PMCCFILTR_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 15, .opc2 = 7,
-      .writefn = pmccfiltr_write,
+      .writefn = pmccfiltr_write, .raw_writefn = raw_write,
       .access = PL0_RW, .accessfn = pmreg_access,
       .type = ARM_CP_IO,
       .fieldoffset = offsetof(CPUARMState, cp15.pmccfiltr_el0),
target/arm/machine.c +24 -0
index 7a22ebc209..b292549614 100644
@@ -620,6 +620,10 @@ static int cpu_pre_save(void *opaque)
 {
     ARMCPU *cpu = opaque;
 
+    if (!kvm_enabled()) {
+        pmu_op_start(&cpu->env);
+    }
+
     if (kvm_enabled()) {
         if (!write_kvmstate_to_list(cpu)) {
             /* This should never fail */
@@ -641,6 +645,17 @@ static int cpu_pre_save(void *opaque)
     return 0;
 }
 
+static int cpu_post_save(void *opaque)
+{
+    ARMCPU *cpu = opaque;
+
+    if (!kvm_enabled()) {
+        pmu_op_finish(&cpu->env);
+    }
+
+    return 0;
+}
+
 static int cpu_pre_load(void *opaque)
 {
     ARMCPU *cpu = opaque;
@@ -653,6 +668,10 @@ static int cpu_pre_load(void *opaque)
      */
     env->irq_line_state = UINT32_MAX;
 
+    if (!kvm_enabled()) {
+        pmu_op_start(&cpu->env);
+    }
+
     return 0;
 }
 
@@ -721,6 +740,10 @@ static int cpu_post_load(void *opaque, int version_id)
     hw_breakpoint_update_all(cpu);
     hw_watchpoint_update_all(cpu);
 
+    if (!kvm_enabled()) {
+        pmu_op_finish(&cpu->env);
+    }
+
     return 0;
 }
 
@@ -729,6 +752,7 @@ const VMStateDescription vmstate_arm_cpu = {
     .version_id = 22,
     .minimum_version_id = 22,
     .pre_save = cpu_pre_save,
+    .post_save = cpu_post_save,
     .pre_load = cpu_pre_load,
     .post_load = cpu_post_load,
     .fields = (VMStateField[]) {
Signature · 1 line
2.19.1
#4 lore raw

PATCH v9 4/14 target/arm: Filter cycle counter based on PMCCFILTR_EL0

In reply to Aaron Lindsay

Rename arm_ccnt_enabled to pmu_counter_enabled, and add logic to only return 'true' if the specified counter is enabled and neither prohibited or filtered.

---
 target/arm/cpu.c    |  3 ++
 target/arm/cpu.h    | 10 ++++-
 target/arm/helper.c | 96 +++++++++++++++++++++++++++++++++++++++++----
 3 files changed, 101 insertions(+), 8 deletions(-)
target/arm/cpu.c +3 -0
index 60411f6bfe..f7bad04f60 100644
@@ -1020,6 +1020,9 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
     if (!cpu->has_pmu) {
         unset_feature(env, ARM_FEATURE_PMU);
         cpu->id_aa64dfr0 &= ~0xf00;
+    } else if (!kvm_enabled()) {
+        arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0);
+        arm_register_el_change_hook(cpu, &pmu_post_el_change, 0);
     }
 
     if (!arm_feature(env, ARM_FEATURE_EL2)) {
target/arm/cpu.h +9 -1
index 61ac458627..627e5c1995 100644
@@ -987,6 +987,12 @@ void pmccntr_op_finish(CPUARMState *env);
 void pmu_op_start(CPUARMState *env);
 void pmu_op_finish(CPUARMState *env);
 
+/**
+ * Functions to register as EL change hooks for PMU mode filtering
+ */
+void pmu_pre_el_change(ARMCPU *cpu, void *ignored);
+void pmu_post_el_change(ARMCPU *cpu, void *ignored);
+
 /* SCTLR bit meanings. Several bits have been reused in newer
  * versions of the architecture; in that case we define constants
  * for both old and new bit meanings. Code which tests against those
@@ -1048,7 +1054,8 @@ void pmu_op_finish(CPUARMState *env);
 
 #define MDCR_EPMAD    (1U << 21)
 #define MDCR_EDAD     (1U << 20)
-#define MDCR_SPME     (1U << 17)
+#define MDCR_SPME     (1U << 17)  /* MDCR_EL3 */
+#define MDCR_HPMD     (1U << 17)  /* MDCR_EL2 */
 #define MDCR_SDD      (1U << 16)
 #define MDCR_SPD      (3U << 14)
 #define MDCR_TDRA     (1U << 11)
@@ -1058,6 +1065,7 @@ void pmu_op_finish(CPUARMState *env);
 #define MDCR_HPME     (1U << 7)
 #define MDCR_TPM      (1U << 6)
 #define MDCR_TPMCR    (1U << 5)
+#define MDCR_HPMN     (0x1fU)
 
 /* Not all of the MDCR_EL3 bits are present in the 32-bit SDCR */
 #define SDCR_VALID_MASK (MDCR_EPMAD | MDCR_EDAD | MDCR_SPME | MDCR_SPD)
target/arm/helper.c +89 -7

141 lines not on this page · raw message

Signature · 1 line
2.19.1
#5 lore raw

PATCH v9 5/14 target/arm: Allow AArch32 access for PMCCFILTR

In reply to Aaron Lindsay
---
 target/arm/helper.c | 27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)
target/arm/helper.c +26 -1
index ddb47813d2..0aff261528 100644
@@ -994,6 +994,10 @@ static const ARMCPRegInfo v6_cp_reginfo[] = {
                                PMXEVTYPER_M | PMXEVTYPER_MT | \
                                PMXEVTYPER_EVTCOUNT)
 
+#define PMCCFILTR             0xf8000000
+#define PMCCFILTR_M           PMXEVTYPER_M
+#define PMCCFILTR_EL0         (PMCCFILTR | PMCCFILTR_M)
+
 static inline uint32_t pmu_num_counters(CPUARMState *env)
 {
   return (env->cp15.c9_pmcr & PMCRN_MASK) >> PMCRN_SHIFT;
@@ -1297,10 +1301,26 @@ static void pmccfiltr_write(CPUARMState *env, const ARMCPRegInfo *ri,
                             uint64_t value)
 {
     pmccntr_op_start(env);
-    env->cp15.pmccfiltr_el0 = value & 0xfc000000;
+    env->cp15.pmccfiltr_el0 = value & PMCCFILTR_EL0;
+    pmccntr_op_finish(env);
+}
+
+static void pmccfiltr_write_a32(CPUARMState *env, const ARMCPRegInfo *ri,
+                            uint64_t value)
+{
+    pmccntr_op_start(env);
+    /* M is not accessible from AArch32 */
+    env->cp15.pmccfiltr_el0 = (env->cp15.pmccfiltr_el0 & PMCCFILTR_M) |
+        (value & PMCCFILTR);
     pmccntr_op_finish(env);
 }
 
+static uint64_t pmccfiltr_read_a32(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+    /* M is not visible in AArch32 */
+    return env->cp15.pmccfiltr_el0 & PMCCFILTR;
+}
+
 static void pmcntenset_write(CPUARMState *env, const ARMCPRegInfo *ri,
                             uint64_t value)
 {
@@ -1536,6 +1556,11 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .readfn = pmccntr_read, .writefn = pmccntr_write,
       .raw_readfn = raw_read, .raw_writefn = raw_write, },
 #endif
+    { .name = "PMCCFILTR", .cp = 15, .opc1 = 0, .crn = 14, .crm = 15, .opc2 = 7,
+      .writefn = pmccfiltr_write_a32, .readfn = pmccfiltr_read_a32,
+      .access = PL0_RW, .accessfn = pmreg_access,
+      .type = ARM_CP_ALIAS | ARM_CP_IO,
+      .resetvalue = 0, },
     { .name = "PMCCFILTR_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 15, .opc2 = 7,
       .writefn = pmccfiltr_write, .raw_writefn = raw_write,
Signature · 1 line
2.19.1
#6 lore raw

PATCH v9 6/14 target/arm: Implement PMOVSSET

In reply to Aaron Lindsay

Add an array for PMOVSSET so we only define it for v7ve+ platforms

---
 target/arm/helper.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
target/arm/helper.c +28 -0
index 0aff261528..71be6fb578 100644
@@ -1342,6 +1342,13 @@ static void pmovsr_write(CPUARMState *env, const ARMCPRegInfo *ri,
     env->cp15.c9_pmovsr &= ~value;
 }
 
+static void pmovsset_write(CPUARMState *env, const ARMCPRegInfo *ri,
+                         uint64_t value)
+{
+    value &= pmu_counter_mask(env);
+    env->cp15.c9_pmovsr |= value;
+}
+
 static void pmxevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri,
                              uint64_t value)
 {
@@ -1709,6 +1716,24 @@ static const ARMCPRegInfo v7mp_cp_reginfo[] = {
     REGINFO_SENTINEL
 };
 
+static const ARMCPRegInfo pmovsset_cp_reginfo[] = {
+    /* PMOVSSET is not implemented in v7 before v7ve */
+    { .name = "PMOVSSET", .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 3,
+      .access = PL0_RW, .accessfn = pmreg_access,
+      .type = ARM_CP_ALIAS,
+      .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmovsr),
+      .writefn = pmovsset_write,
+      .raw_writefn = raw_write },
+    { .name = "PMOVSSET_EL0", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 14, .opc2 = 3,
+      .access = PL0_RW, .accessfn = pmreg_access,
+      .type = ARM_CP_ALIAS,
+      .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr),
+      .writefn = pmovsset_write,
+      .raw_writefn = raw_write },
+    REGINFO_SENTINEL
+};
+
 static void teecr_write(CPUARMState *env, const ARMCPRegInfo *ri,
                         uint64_t value)
 {
@@ -5191,6 +5216,9 @@ void register_cp_regs_for_features(ARMCPU *cpu)
         !arm_feature(env, ARM_FEATURE_PMSA)) {
         define_arm_cp_regs(cpu, v7mp_cp_reginfo);
     }
+    if (arm_feature(env, ARM_FEATURE_V7VE)) {
+        define_arm_cp_regs(cpu, pmovsset_cp_reginfo);
+    }
     if (arm_feature(env, ARM_FEATURE_V7)) {
         /* v7 performance monitor control register: same implementor
          * field as main ID register, and we implement only the cycle
Signature · 1 line
2.19.1
#7 lore raw

PATCH v9 7/14 target/arm: Define FIELDs for ID_DFR0

In reply to Aaron Lindsay

This is immediately necessary for the PMUv3 implementation to check ID_DFR0.PerfMon to enable/disable specific features, but defines the full complement of fields for possible future use elsewhere.

---
 target/arm/cpu.h | 8 ++++++++
 1 file changed, 8 insertions(+)
target/arm/cpu.h +8 -0
index 627e5c1995..304e6e47b3 100644
@@ -1586,6 +1586,14 @@ FIELD(ID_AA64PFR0, GIC, 24, 4)
 FIELD(ID_AA64PFR0, RAS, 28, 4)
 FIELD(ID_AA64PFR0, SVE, 32, 4)
 
+FIELD(ID_DFR0, COPDBG, 0, 4)
+FIELD(ID_DFR0, COPSDBG, 4, 4)
+FIELD(ID_DFR0, MMAPDBG, 8, 4)
+FIELD(ID_DFR0, COPTRC, 12, 4)
+FIELD(ID_DFR0, MMAPTRC, 16, 4)
+FIELD(ID_DFR0, MPROFDBG, 20, 4)
+FIELD(ID_DFR0, PERFMON, 24, 4)
+
 QEMU_BUILD_BUG_ON(ARRAY_SIZE(((ARMCPU *)0)->ccsidr) <= R_V7M_CSSELR_INDEX_MASK);
 
 /* If adding a feature bit which corresponds to a Linux ELF
Signature · 1 line
2.19.1
Reviewed-by on v9 7/14
#8 lore raw

Re: [Qemu-devel] [PATCH v9 07/14] target/arm: Define FIELDs for ID_DFR0

Quoted 15 lines · Aaron Lindsay

This is immediately necessary for the PMUv3 implementation to check ID_DFR0.PerfMon to enable/disable specific features, but defines the full complement of fields for possible future use elsewhere.

---
 target/arm/cpu.h | 8 ++++++++
 1 file changed, 8 insertions(+)
target/arm/cpu.h +0 -0
index 627e5c1995..304e6e47b3 100644

target/arm/cpu.h FIELD(ID_AA64PFR0, GIC, 24, 4) · line 1595

Quoted 10 lines
target/arm/cpu.h +7 -0
@@ -1586,6 +1586,14 @@ FIELD(ID_AA64PFR0, GIC, 24, 4)
 FIELD(ID_AA64PFR0, RAS, 28, 4)
 FIELD(ID_AA64PFR0, SVE, 32, 4)
 
+FIELD(ID_DFR0, COPDBG, 0, 4)
+FIELD(ID_DFR0, COPSDBG, 4, 4)
+FIELD(ID_DFR0, MMAPDBG, 8, 4)
+FIELD(ID_DFR0, COPTRC, 12, 4)
+FIELD(ID_DFR0, MMAPTRC, 16, 4)
+FIELD(ID_DFR0, MPROFDBG, 20, 4)
+FIELD(ID_DFR0, PERFMON, 24, 4)

Also
FIELD(ID_DFR0, TRACEFILT, 28, 4)

(this is a v8.4 field; we might as well add it since you have another minor tweak that needs a respin.)

Otherwise

thanks
-- PMM

#9 lore raw

PATCH v9 8/14 target/arm: Make PMCEID[01]_EL0 64 bit registers, add PMCEID[23]

In reply to Aaron Lindsay
---
 target/arm/cpu.h    |  4 ++--
 target/arm/helper.c | 18 ++++++++++++++++--
 2 files changed, 18 insertions(+), 4 deletions(-)
target/arm/cpu.h +2 -2
index 304e6e47b3..4216fe22db 100644
@@ -837,8 +837,8 @@ struct ARMCPU {
     uint32_t id_pfr0;
     uint32_t id_pfr1;
     uint32_t id_dfr0;
-    uint32_t pmceid0;
-    uint32_t pmceid1;
+    uint64_t pmceid0;
+    uint64_t pmceid1;
     uint32_t id_afr0;
     uint32_t id_mmfr0;
     uint32_t id_mmfr1;
target/arm/helper.c +16 -2
index 71be6fb578..fb6939e99c 100644
@@ -5256,6 +5256,20 @@ void register_cp_regs_for_features(ARMCPU *cpu)
     } else {
         define_arm_cp_regs(cpu, not_v7_cp_reginfo);
     }
+    if (FIELD_EX32(cpu->id_dfr0, ID_DFR0, PERFMON) >= 4) {
+        ARMCPRegInfo v81_pmu_regs[] = {
+            { .name = "PMCEID2", .state = ARM_CP_STATE_AA32,
+              .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 4,
+              .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
+              .resetvalue = extract64(cpu->pmceid0, 32, 32) },
+            { .name = "PMCEID3", .state = ARM_CP_STATE_AA32,
+              .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 5,
+              .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
+              .resetvalue = extract64(cpu->pmceid1, 32, 32) },
+            REGINFO_SENTINEL
+        };
+        define_arm_cp_regs(cpu, v81_pmu_regs);
+    }
     if (arm_feature(env, ARM_FEATURE_V8)) {
         /* AArch64 ID registers, which all have impdef reset values.
          * Note that within the ID register ranges the unused slots
@@ -5432,7 +5446,7 @@ void register_cp_regs_for_features(ARMCPU *cpu)
             { .name = "PMCEID0", .state = ARM_CP_STATE_AA32,
               .cp = 15, .opc1 = 0, .crn = 9, .crm = 12, .opc2 = 6,
               .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
-              .resetvalue = cpu->pmceid0 },
+              .resetvalue = extract64(cpu->pmceid0, 0, 32) },
             { .name = "PMCEID0_EL0", .state = ARM_CP_STATE_AA64,
               .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 6,
               .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
@@ -5440,7 +5454,7 @@ void register_cp_regs_for_features(ARMCPU *cpu)
             { .name = "PMCEID1", .state = ARM_CP_STATE_AA32,
               .cp = 15, .opc1 = 0, .crn = 9, .crm = 12, .opc2 = 7,
               .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
-              .resetvalue = cpu->pmceid1 },
+              .resetvalue = extract64(cpu->pmceid1, 0, 32) },
             { .name = "PMCEID1_EL0", .state = ARM_CP_STATE_AA64,
               .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 7,
               .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
Signature · 1 line
2.19.1
#10 lore raw

Re: [Qemu-arm] [PATCH v9 08/14] target/arm: Make PMCEID[01]_EL0 64 bit registers, add PMCEID[23]

Quoted 26 lines · Aaron Lindsay
---
 target/arm/cpu.h    |  4 ++--
 target/arm/helper.c | 18 ++++++++++++++++--
 2 files changed, 18 insertions(+), 4 deletions(-)
target/arm/cpu.h +2 -2
index 304e6e47b3..4216fe22db 100644
@@ -837,8 +837,8 @@ struct ARMCPU {
     uint32_t id_pfr0;
     uint32_t id_pfr1;
     uint32_t id_dfr0;
-    uint32_t pmceid0;
-    uint32_t pmceid1;
+    uint64_t pmceid0;
+    uint64_t pmceid1;
     uint32_t id_afr0;
     uint32_t id_mmfr0;
     uint32_t id_mmfr1;
target/arm/helper.c +0 -0
index 71be6fb578..fb6939e99c 100644

target/arm/helper.c void register_cp_regs_for_features(ARMCPU *cpu) · line 5259

Quoted 4 lines
target/arm/helper.c +1 -0
@@ -5256,6 +5256,20 @@ void register_cp_regs_for_features(ARMCPU *cpu)
     } else {
         define_arm_cp_regs(cpu, not_v7_cp_reginfo);
     }
+    if (FIELD_EX32(cpu->id_dfr0, ID_DFR0, PERFMON) >= 4) {

After further discussion on my last version, this should be

if (FIELD_EX32(cpu->id_dfr0, ID_DFR0, PERFMON) >= 4 &&

	FIELD_EX32(cpu->id_dfr0, ID_DFR0, PERFMON) != 0xf) {

to guard against defining these registers for implementation-defined PMUs.

Quoted 37 lines
target/arm/helper.c +15 -2
+        ARMCPRegInfo v81_pmu_regs[] = {
+            { .name = "PMCEID2", .state = ARM_CP_STATE_AA32,
+              .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 4,
+              .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
+              .resetvalue = extract64(cpu->pmceid0, 32, 32) },
+            { .name = "PMCEID3", .state = ARM_CP_STATE_AA32,
+              .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 5,
+              .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
+              .resetvalue = extract64(cpu->pmceid1, 32, 32) },
+            REGINFO_SENTINEL
+        };
+        define_arm_cp_regs(cpu, v81_pmu_regs);
+    }
     if (arm_feature(env, ARM_FEATURE_V8)) {
         /* AArch64 ID registers, which all have impdef reset values.
          * Note that within the ID register ranges the unused slots
@@ -5432,7 +5446,7 @@ void register_cp_regs_for_features(ARMCPU *cpu)
             { .name = "PMCEID0", .state = ARM_CP_STATE_AA32,
               .cp = 15, .opc1 = 0, .crn = 9, .crm = 12, .opc2 = 6,
               .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
-              .resetvalue = cpu->pmceid0 },
+              .resetvalue = extract64(cpu->pmceid0, 0, 32) },
             { .name = "PMCEID0_EL0", .state = ARM_CP_STATE_AA64,
               .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 6,
               .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
@@ -5440,7 +5454,7 @@ void register_cp_regs_for_features(ARMCPU *cpu)
             { .name = "PMCEID1", .state = ARM_CP_STATE_AA32,
               .cp = 15, .opc1 = 0, .crn = 9, .crm = 12, .opc2 = 7,
               .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
-              .resetvalue = cpu->pmceid1 },
+              .resetvalue = extract64(cpu->pmceid1, 0, 32) },
             { .name = "PMCEID1_EL0", .state = ARM_CP_STATE_AA64,
               .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 7,
               .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST,
Signature · 1 line
2.19.1
Reviewed-by
#11 lore raw

Re: [Qemu-devel] [PATCH v9 08/14] target/arm: Make PMCEID[01]_EL0 64 bit registers, add PMCEID[23]

Quoted 35 lines · Aaron Lindsay
Quoted 26 lines · Aaron Lindsay
---
 target/arm/cpu.h    |  4 ++--
 target/arm/helper.c | 18 ++++++++++++++++--
 2 files changed, 18 insertions(+), 4 deletions(-)
target/arm/cpu.h +2 -2
index 304e6e47b3..4216fe22db 100644
@@ -837,8 +837,8 @@ struct ARMCPU {
     uint32_t id_pfr0;
     uint32_t id_pfr1;
     uint32_t id_dfr0;
-    uint32_t pmceid0;
-    uint32_t pmceid1;
+    uint64_t pmceid0;
+    uint64_t pmceid1;
     uint32_t id_afr0;
     uint32_t id_mmfr0;
     uint32_t id_mmfr1;
target/arm/helper.c +0 -0
index 71be6fb578..fb6939e99c 100644

target/arm/helper.c void register_cp_regs_for_features(ARMCPU *cpu) · line 5259

Quoted 4 lines
target/arm/helper.c +1 -0
@@ -5256,6 +5256,20 @@ void register_cp_regs_for_features(ARMCPU *cpu)
     } else {
         define_arm_cp_regs(cpu, not_v7_cp_reginfo);
     }
+    if (FIELD_EX32(cpu->id_dfr0, ID_DFR0, PERFMON) >= 4) {

After further discussion on my last version, this should be

Quoted 5 lines

if (FIELD_EX32(cpu->id_dfr0, ID_DFR0, PERFMON) >= 4 &&

        FIELD_EX32(cpu->id_dfr0, ID_DFR0, PERFMON) != 0xf) {

to guard against defining these registers for implementation-defined PMUs.

With that change

thanks
-- PMM

#12 lore raw

Re: [Qemu-arm] [PATCH v9 08/14] target/arm: Make PMCEID[01]_EL0 64 bit registers, add PMCEID[23]

In reply to Aaron Lindsay
Quoted 34 lines · Aaron Lindsay
Quoted 26 lines · Aaron Lindsay
---
 target/arm/cpu.h    |  4 ++--
 target/arm/helper.c | 18 ++++++++++++++++--
 2 files changed, 18 insertions(+), 4 deletions(-)
target/arm/cpu.h +2 -2
index 304e6e47b3..4216fe22db 100644
@@ -837,8 +837,8 @@ struct ARMCPU {
     uint32_t id_pfr0;
     uint32_t id_pfr1;
     uint32_t id_dfr0;
-    uint32_t pmceid0;
-    uint32_t pmceid1;
+    uint64_t pmceid0;
+    uint64_t pmceid1;
     uint32_t id_afr0;
     uint32_t id_mmfr0;
     uint32_t id_mmfr1;
target/arm/helper.c +0 -0
index 71be6fb578..fb6939e99c 100644

target/arm/helper.c void register_cp_regs_for_features(ARMCPU *cpu) · line 5259

Quoted 4 lines
target/arm/helper.c +1 -0
@@ -5256,6 +5256,20 @@ void register_cp_regs_for_features(ARMCPU *cpu)
     } else {
         define_arm_cp_regs(cpu, not_v7_cp_reginfo);
     }
+    if (FIELD_EX32(cpu->id_dfr0, ID_DFR0, PERFMON) >= 4) {

After further discussion on my last version, this should be

Quoted 5 lines

if (FIELD_EX32(cpu->id_dfr0, ID_DFR0, PERFMON) >= 4 &&

	FIELD_EX32(cpu->id_dfr0, ID_DFR0, PERFMON) != 0xf) {

to guard against defining these registers for implementation-defined PMUs.

When id fields define values like 0b1111, that is a hint that the field should be interpreted as signed, and you should still use a >= comparison. (See D12.1.4, Principles of the ID scheme for fields in ID registers.)

A patch adding

#define FIELD_EX32S(storage, reg, field)                                   \
    sextract32((storage), R_ ## reg ## _ ## field ## _SHIFT,               \
               R_ ## reg ## _ ## field ## _LENGTH)
#define FIELD_EX64S(storage, reg, field)                                   \
    sextract64((storage), R_ ## reg ## _ ## field ## _SHIFT,               \
               R_ ## reg ## _ ## field ## _LENGTH)

to include/hw/registerfields.h would be welcome and appropriate, I think.

r~

#13 lore raw

Re: [Qemu-arm] [PATCH v9 08/14] target/arm: Make PMCEID[01]_EL0 64 bit registers, add PMCEID[23]

Quoted 11 lines · Richard Henderson
Quoted 9 lines · Aaron Lindsay
Quoted 2 lines · Aaron Lindsay

+ if (FIELD_EX32(cpu->id_dfr0, ID_DFR0, PERFMON) >= 4) {

After further discussion on my last version, this should be

if (FIELD_EX32(cpu->id_dfr0, ID_DFR0, PERFMON) >= 4 &&

      FIELD_EX32(cpu->id_dfr0, ID_DFR0, PERFMON) != 0xf) {
Quoted 6 lines
Quoted 2 lines

to guard against defining these registers for implementation-defined PMUs.

When id fields define values like 0b1111, that is a hint that the field should be interpreted as signed, and you should still use a >= comparison. (See D12.1.4, Principles of the ID scheme for fields in ID registers.)

That section calls out these PMU ID registers as exceptions which do not follow the scheme and specifically notes that the "not 0xf and greater than or equal to 4" is the kind of comparison required here...

thanks
-- PMM

#14 lore raw

PATCH v9 9/14 target/arm: Add array for supported PMU events, generate PMCEID[01]_EL0

In reply to Aaron Lindsay

This commit doesn't add any supported events, but provides the framework for adding them. We store the pm_event structs in a simple array, and provide the mapping from the event numbers to array indexes in the supported_event_map array. Because the value of PMCEID[01] depends upon which events are supported at runtime, generate it dynamically.

---
 target/arm/cpu.c    | 19 +++++++++------
 target/arm/cpu.h    | 10 ++++++++
 target/arm/cpu64.c  |  4 ----
 target/arm/helper.c | 57 +++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 79 insertions(+), 11 deletions(-)
target/arm/cpu.c +12 -7
index f7bad04f60..208a08e867 100644
@@ -1019,10 +1019,19 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
 
     if (!cpu->has_pmu) {
         unset_feature(env, ARM_FEATURE_PMU);
+    }
+    if (arm_feature(env, ARM_FEATURE_PMU)) {
+        cpu->pmceid0 = get_pmceid(&cpu->env, 0);
+        cpu->pmceid1 = get_pmceid(&cpu->env, 1);
+
+        if (!kvm_enabled()) {
+            arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0);
+            arm_register_el_change_hook(cpu, &pmu_post_el_change, 0);
+        }
+    } else {
         cpu->id_aa64dfr0 &= ~0xf00;
-    } else if (!kvm_enabled()) {
-        arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0);
-        arm_register_el_change_hook(cpu, &pmu_post_el_change, 0);
+        cpu->pmceid0 = 0;
+        cpu->pmceid1 = 0;
     }
 
     if (!arm_feature(env, ARM_FEATURE_EL2)) {
@@ -1665,8 +1674,6 @@ static void cortex_a7_initfn(Object *obj)
     cpu->id_pfr0 = 0x00001131;
     cpu->id_pfr1 = 0x00011011;
     cpu->id_dfr0 = 0x02010555;
-    cpu->pmceid0 = 0x00000000;
-    cpu->pmceid1 = 0x00000000;
     cpu->id_afr0 = 0x00000000;
     cpu->id_mmfr0 = 0x10101105;
     cpu->id_mmfr1 = 0x40000000;
@@ -1712,8 +1719,6 @@ static void cortex_a15_initfn(Object *obj)
     cpu->id_pfr0 = 0x00001131;
     cpu->id_pfr1 = 0x00011011;
     cpu->id_dfr0 = 0x02010555;
-    cpu->pmceid0 = 0x0000000;
-    cpu->pmceid1 = 0x00000000;
     cpu->id_afr0 = 0x00000000;
     cpu->id_mmfr0 = 0x10201105;
     cpu->id_mmfr1 = 0x20000000;
target/arm/cpu.h +10 -0
index 4216fe22db..0255f68bd7 100644
@@ -993,6 +993,16 @@ void pmu_op_finish(CPUARMState *env);
 void pmu_pre_el_change(ARMCPU *cpu, void *ignored);
 void pmu_post_el_change(ARMCPU *cpu, void *ignored);
 
+/*
+ * get_pmceid
+ * @env: CPUARMState
+ * @which: which PMCEID register to return (0 or 1)
+ *
+ * Return the PMCEID[01]_EL0 register values corresponding to the counters
+ * which are supported given the current configuration
+ */
+uint64_t get_pmceid(CPUARMState *env, unsigned which);
+
 /* SCTLR bit meanings. Several bits have been reused in newer
  * versions of the architecture; in that case we define constants
  * for both old and new bit meanings. Code which tests against those
target/arm/cpu64.c +0 -4
index 873f059bf2..a1aad772fa 100644
@@ -138,8 +138,6 @@ static void aarch64_a57_initfn(Object *obj)
     cpu->isar.id_isar6 = 0;
     cpu->isar.id_aa64pfr0 = 0x00002222;
     cpu->id_aa64dfr0 = 0x10305106;
-    cpu->pmceid0 = 0x00000000;
-    cpu->pmceid1 = 0x00000000;
     cpu->isar.id_aa64isar0 = 0x00011120;
     cpu->id_aa64mmfr0 = 0x00001124;
     cpu->dbgdidr = 0x3516d000;
@@ -246,8 +244,6 @@ static void aarch64_a72_initfn(Object *obj)
     cpu->isar.id_isar5 = 0x00011121;
     cpu->isar.id_aa64pfr0 = 0x00002222;
     cpu->id_aa64dfr0 = 0x10305106;
-    cpu->pmceid0 = 0x00000000;
-    cpu->pmceid1 = 0x00000000;
     cpu->isar.id_aa64isar0 = 0x00011120;
     cpu->id_aa64mmfr0 = 0x00001124;
     cpu->dbgdidr = 0x3516d000;
target/arm/helper.c +57 -0

63 lines not on this page · raw message

Signature · 1 line
2.19.1
#15 lore raw

PATCH v9 10/14 target/arm: Finish implementation of PM[X]EVCNTR and PM[X]EVTYPER

In reply to Aaron Lindsay

Add arrays to hold the registers, the definitions themselves, access functions, and logic to reset counters when PMCR.P is set. Update filtering code to support counters other than PMCCNTR. Support migration with raw read/write functions.

---
 target/arm/cpu.h    |   3 +
 target/arm/helper.c | 296 +++++++++++++++++++++++++++++++++++++++++---
 2 files changed, 282 insertions(+), 17 deletions(-)
target/arm/cpu.h +3 -0
index 0255f68bd7..62987111be 100644
@@ -482,6 +482,9 @@ typedef struct CPUARMState {
          * pmccntr_op_finish.
          */
         uint64_t c15_ccnt_delta;
+        uint64_t c14_pmevcntr[31];
+        uint64_t c14_pmevcntr_delta[31];
+        uint64_t c14_pmevtyper[31];
         uint64_t pmccfiltr_el0; /* Performance Monitor Filter Register */
         uint64_t vpidr_el2; /* Virtualization Processor ID Register */
         uint64_t vmpidr_el2; /* Virtualization Multiprocessor ID Register */
target/arm/helper.c +279 -17

397 lines not on this page · raw message

Signature · 1 line
2.19.1
#16 lore raw

PATCH v9 11/14 target/arm: PMU: Add instruction and cycle events

In reply to Aaron Lindsay

The instruction event is only enabled when icount is used, cycles are always supported. Always defining get_cycle_count (but altering its behavior depending on CONFIG_USER_ONLY) allows us to remove some CONFIG_USER_ONLY #defines throughout the rest of the code.

---
 target/arm/helper.c | 90 ++++++++++++++++++++++-----------------------
 1 file changed, 44 insertions(+), 46 deletions(-)
target/arm/helper.c +44 -46
index c51031d262..a45ab5d9da 100644
@@ -15,6 +15,7 @@
 #include "arm_ldst.h"
 #include <zlib.h> /* For crc32 */
 #include "exec/semihost.h"
+#include "sysemu/cpus.h"
 #include "sysemu/kvm.h"
 #include "fpu/softfloat.h"
 #include "qemu/range.h"
@@ -1021,7 +1022,48 @@ typedef struct pm_event {
     uint64_t (*get_count)(CPUARMState *);
 } pm_event;
 
+static bool event_always_supported(CPUARMState *env)
+{
+    return true;
+}
+
+/*
+ * Return the underlying cycle count for the PMU cycle counters. If we're in
+ * usermode, simply return 0.
+ */
+static uint64_t cycles_get_count(CPUARMState *env)
+{
+#ifndef CONFIG_USER_ONLY
+    return muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
+                   ARM_CPU_FREQ, NANOSECONDS_PER_SECOND);
+#else
+    return cpu_get_host_ticks();
+#endif
+}
+
+#ifndef CONFIG_USER_ONLY
+static bool instructions_supported(CPUARMState *env)
+{
+    return use_icount == 1 /* Precise instruction counting */;
+}
+
+static uint64_t instructions_get_count(CPUARMState *env)
+{
+    return (uint64_t)cpu_get_icount_raw();
+}
+#endif
+
 static const pm_event pm_events[] = {
+#ifndef CONFIG_USER_ONLY
+    { .number = 0x008, /* INST_RETIRED, Instruction architecturally executed */
+      .supported = instructions_supported,
+      .get_count = instructions_get_count,
+    },
+    { .number = 0x011, /* CPU_CYCLES, Cycle */
+      .supported = event_always_supported,
+      .get_count = cycles_get_count,
+    }
+#endif
 };
 
 /*
@@ -1030,7 +1072,7 @@ static const pm_event pm_events[] = {
  * should first be updated to something sparse instead of the current
  * supported_event_map[] array.
  */
-#define MAX_EVENT_ID 0x0
+#define MAX_EVENT_ID 0x11
 #define UNSUPPORTED_EVENT UINT16_MAX
 static uint16_t supported_event_map[MAX_EVENT_ID + 1];
 
@@ -1131,8 +1173,6 @@ static CPAccessResult pmreg_access_swinc(CPUARMState *env,
     return pmreg_access(env, ri, isread);
 }
 
-#ifndef CONFIG_USER_ONLY
-
 static CPAccessResult pmreg_access_selr(CPUARMState *env,
                                         const ARMCPRegInfo *ri,
                                         bool isread)
@@ -1243,9 +1283,7 @@ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter)
  */
 void pmccntr_op_start(CPUARMState *env)
 {
-    uint64_t cycles = 0;
-    cycles = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
-                          ARM_CPU_FREQ, NANOSECONDS_PER_SECOND);
+    uint64_t cycles = cycles_get_count(env);
 
     if (pmu_counter_enabled(env, 31)) {
         uint64_t eff_cycles = cycles;
@@ -1391,42 +1429,6 @@ static void pmccntr_write32(CPUARMState *env, const ARMCPRegInfo *ri,
     pmccntr_write(env, ri, deposit64(cur_val, 0, 32, value));
 }
 
-#else /* CONFIG_USER_ONLY */
-
-void pmccntr_op_start(CPUARMState *env)
-{
-}
-
-void pmccntr_op_finish(CPUARMState *env)
-{
-}
-
-void pmevcntr_op_start(CPUARMState *env, uint8_t i)
-{
-}
-
-void pmevcntr_op_finish(CPUARMState *env, uint8_t i)
-{
-}
-
-void pmu_op_start(CPUARMState *env)
-{
-}
-
-void pmu_op_finish(CPUARMState *env)
-{
-}
-
-void pmu_pre_el_change(ARMCPU *cpu, void *ignored)
-{
-}
-
-void pmu_post_el_change(ARMCPU *cpu, void *ignored)
-{
-}
-
-#endif
-
 static void pmccfiltr_write(CPUARMState *env, const ARMCPRegInfo *ri,
                             uint64_t value)
 {
@@ -1814,7 +1816,6 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
     /* Unimplemented so WI. */
     { .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4,
       .access = PL0_W, .accessfn = pmreg_access_swinc, .type = ARM_CP_NOP },
-#ifndef CONFIG_USER_ONLY
     { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5,
       .access = PL0_RW, .type = ARM_CP_ALIAS,
       .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmselr),
@@ -1836,7 +1837,6 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .fieldoffset = offsetof(CPUARMState, cp15.c15_ccnt),
       .readfn = pmccntr_read, .writefn = pmccntr_write,
       .raw_readfn = raw_read, .raw_writefn = raw_write, },
-#endif
     { .name = "PMCCFILTR", .cp = 15, .opc1 = 0, .crn = 14, .crm = 15, .opc2 = 7,
       .writefn = pmccfiltr_write_a32, .readfn = pmccfiltr_read_a32,
       .access = PL0_RW, .accessfn = pmreg_access,
@@ -5506,7 +5506,6 @@ void register_cp_regs_for_features(ARMCPU *cpu)
          * count register.
          */
         unsigned int i, pmcrn = 0;
-#ifndef CONFIG_USER_ONLY
         ARMCPRegInfo pmcr = {
             .name = "PMCR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 0,
             .access = PL0_RW,
@@ -5563,7 +5562,6 @@ void register_cp_regs_for_features(ARMCPU *cpu)
             g_free(pmevtyper_name);
             g_free(pmevtyper_el0_name);
         }
-#endif
         ARMCPRegInfo clidr = {
             .name = "CLIDR", .state = ARM_CP_STATE_BOTH,
             .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 1,
Signature · 1 line
2.19.1
#17 lore raw

PATCH v9 12/14 target/arm: PMU: Set PMCR.N to 4

In reply to Aaron Lindsay

This both advertises that we support four counters and enables them because the pmu_num_counters() reads this value from PMCR.

---
 target/arm/helper.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
target/arm/helper.c +5 -5
index a45ab5d9da..724c2f1d69 100644
@@ -1768,7 +1768,7 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .access = PL1_W, .type = ARM_CP_NOP },
     /* Performance monitors are implementation defined in v7,
      * but with an ARM recommended set of registers, which we
-     * follow (although we don't actually implement any counters)
+     * follow.
      *
      * Performance registers fall into three categories:
      *  (a) always UNDEF in PL0, RW in PL1 (PMINTENSET, PMINTENCLR)
@@ -5502,10 +5502,10 @@ void register_cp_regs_for_features(ARMCPU *cpu)
     }
     if (arm_feature(env, ARM_FEATURE_V7)) {
         /* v7 performance monitor control register: same implementor
-         * field as main ID register, and we implement only the cycle
-         * count register.
+         * field as main ID register, and we implement four counters in
+         * addition to the cycle count register.
          */
-        unsigned int i, pmcrn = 0;
+        unsigned int i, pmcrn = 4;
         ARMCPRegInfo pmcr = {
             .name = "PMCR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 0,
             .access = PL0_RW,
@@ -5520,7 +5520,7 @@ void register_cp_regs_for_features(ARMCPU *cpu)
             .access = PL0_RW, .accessfn = pmreg_access,
             .type = ARM_CP_IO,
             .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcr),
-            .resetvalue = cpu->midr & 0xff000000,
+            .resetvalue = (cpu->midr & 0xff000000) | (pmcrn << PMCRN_SHIFT),
             .writefn = pmcr_write, .raw_writefn = raw_write,
         };
         define_one_arm_cp_reg(cpu, &pmcr);
Signature · 1 line
2.19.1
#18 lore raw

PATCH v9 13/14 target/arm: Implement PMSWINC

In reply to Aaron Lindsay
---
 target/arm/helper.c | 39 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)
target/arm/helper.c +37 -2
index 724c2f1d69..3906b6c7a4 100644
@@ -1027,6 +1027,15 @@ static bool event_always_supported(CPUARMState *env)
     return true;
 }
 
+static uint64_t swinc_get_count(CPUARMState *env)
+{
+    /*
+     * SW_INCR events are written directly to the pmevcntr's by writes to
+     * PMSWINC, so there is no underlying count maintained by the PMU itself
+     */
+    return 0;
+}
+
 /*
  * Return the underlying cycle count for the PMU cycle counters. If we're in
  * usermode, simply return 0.
@@ -1054,6 +1063,10 @@ static uint64_t instructions_get_count(CPUARMState *env)
 #endif
 
 static const pm_event pm_events[] = {
+    { .number = 0x000, /* SW_INCR */
+      .supported = event_always_supported,
+      .get_count = swinc_get_count,
+    },
 #ifndef CONFIG_USER_ONLY
     { .number = 0x008, /* INST_RETIRED, Instruction architecturally executed */
       .supported = instructions_supported,
@@ -1393,6 +1406,24 @@ static void pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
     pmu_op_finish(env);
 }
 
+static void pmswinc_write(CPUARMState *env, const ARMCPRegInfo *ri,
+                          uint64_t value)
+{
+    unsigned int i;
+    for (i = 0; i < pmu_num_counters(env); i++) {
+        /* Increment a counter's count iff: */
+        if ((value & (1 << i)) && /* counter's bit is set */
+                /* counter is enabled and not filtered */
+                pmu_counter_enabled(env, i) &&
+                /* counter is SW_INCR */
+                (env->cp15.c14_pmevtyper[i] & PMXEVTYPER_EVTCOUNT) == 0x0) {
+            pmevcntr_op_start(env, i);
+            env->cp15.c14_pmevcntr[i]++;
+            pmevcntr_op_finish(env, i);
+        }
+    }
+}
+
 static uint64_t pmccntr_read(CPUARMState *env, const ARMCPRegInfo *ri)
 {
     uint64_t ret;
@@ -1813,9 +1844,13 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr),
       .writefn = pmovsr_write,
       .raw_writefn = raw_write },
-    /* Unimplemented so WI. */
     { .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4,
-      .access = PL0_W, .accessfn = pmreg_access_swinc, .type = ARM_CP_NOP },
+      .access = PL0_W, .accessfn = pmreg_access_swinc, .type = ARM_CP_NO_RAW,
+      .writefn = pmswinc_write },
+    { .name = "PMSWINC_EL0", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 4,
+      .access = PL0_W, .accessfn = pmreg_access_swinc, .type = ARM_CP_NO_RAW,
+      .writefn = pmswinc_write },
     { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5,
       .access = PL0_RW, .type = ARM_CP_ALIAS,
       .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmselr),
Signature · 1 line
2.19.1
#19 lore raw

PATCH v9 14/14 target/arm: Send interrupts on PMU counter overflow

In reply to Aaron Lindsay

Setup a QEMUTimer to get a callback when we expect counters to next overflow and trigger an interrupt at that time.

---
 target/arm/cpu.c    |  12 +++++
 target/arm/cpu.h    |   7 +++
 target/arm/helper.c | 126 +++++++++++++++++++++++++++++++++++++++++---
 3 files changed, 139 insertions(+), 6 deletions(-)
target/arm/cpu.c +12 -0
index 208a08e867..85cec59fc9 100644
@@ -827,6 +827,13 @@ static void arm_cpu_finalizefn(Object *obj)
         QLIST_REMOVE(hook, node);
         g_free(hook);
     }
+#ifndef CONFIG_USER_ONLY
+    if (cpu->pmu_timer) {
+        timer_del(cpu->pmu_timer);
+        timer_deinit(cpu->pmu_timer);
+        timer_free(cpu->pmu_timer);
+    }
+#endif
 }
 
 static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
@@ -1028,6 +1035,11 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
             arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0);
             arm_register_el_change_hook(cpu, &pmu_post_el_change, 0);
         }
+
+#ifndef CONFIG_USER_ONLY
+        cpu->pmu_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, arm_pmu_timer_cb,
+                cpu);
+#endif
     } else {
         cpu->id_aa64dfr0 &= ~0xf00;
         cpu->pmceid0 = 0;
target/arm/cpu.h +7 -0
index 62987111be..747c3f6be2 100644
@@ -733,6 +733,8 @@ struct ARMCPU {
 
     /* Timers used by the generic (architected) timer */
     QEMUTimer *gt_timer[NUM_GTIMERS];
+    /* Timer used by the PMU */
+    QEMUTimer *pmu_timer;
     /* GPIO outputs for generic timer */
     qemu_irq gt_timer_outputs[NUM_GTIMERS];
     /* GPIO output for GICv3 maintenance interrupt signal */
@@ -990,6 +992,11 @@ void pmccntr_op_finish(CPUARMState *env);
 void pmu_op_start(CPUARMState *env);
 void pmu_op_finish(CPUARMState *env);
 
+/**
+ * Called when a PMU counter is due to overflow
+ */
+void arm_pmu_timer_cb(void *opaque);
+
 /**
  * Functions to register as EL change hooks for PMU mode filtering
  */
target/arm/helper.c +120 -6

260 lines not on this page · raw message

Signature · 1 line
2.19.1
#20 lore raw

Re: [Qemu-devel] [PATCH v9 14/14] target/arm: Send interrupts on PMU counter overflow

Quoted 15 lines · Aaron Lindsay

Setup a QEMUTimer to get a callback when we expect counters to next overflow and trigger an interrupt at that time.

---
 target/arm/cpu.c    |  12 +++++
 target/arm/cpu.h    |   7 +++
 target/arm/helper.c | 126 +++++++++++++++++++++++++++++++++++++++++---
 3 files changed, 139 insertions(+), 6 deletions(-)

target/arm/cpu.h struct ARMCPU { · line 737

Quoted 5 lines
target/arm/cpu.h +2 -0
@@ -733,6 +733,8 @@ struct ARMCPU {
 
     /* Timers used by the generic (architected) timer */
     QEMUTimer *gt_timer[NUM_GTIMERS];
+    /* Timer used by the PMU */
+    QEMUTimer *pmu_timer;

We don't seem to migrate this timer state. Is that OK? If so, a brief comment somewhere with the rationale would be helpful.

thanks
-- PMM

#21 lore raw

Re: [Qemu-arm] [PATCH v9 14/14] target/arm: Send interrupts on PMU counter overflow

Quoted 17 lines · Peter Maydell
Quoted 16 lines · Aaron Lindsay

Setup a QEMUTimer to get a callback when we expect counters to next overflow and trigger an interrupt at that time.

---
 target/arm/cpu.c    |  12 +++++
 target/arm/cpu.h    |   7 +++
 target/arm/helper.c | 126 +++++++++++++++++++++++++++++++++++++++++---
 3 files changed, 139 insertions(+), 6 deletions(-)
target/arm/cpu.h +0 -0
@@ -733,6 +733,8 @@ struct ARMCPU {
 
Quoted 7 lines

target/arm/cpu.h struct ARMCPU { · line 737

Quoted 4 lines
target/arm/cpu.h +2 -0
     /* Timers used by the generic (architected) timer */
     QEMUTimer *gt_timer[NUM_GTIMERS];
+    /* Timer used by the PMU */
+    QEMUTimer *pmu_timer;

We don't seem to migrate this timer state. Is that OK? If so, a brief comment somewhere with the rationale would be helpful.

cpu_post_load() calls pmccntr_op_finish() and pmevcntr_op_finish() for each counter via pmu_op_finish(). They handle setting the timer according to the restored counters' state. I'll add a comment here at the definition unless you prefer somewhere else.

-Aaron