ARC: Remove 0x prefix from unit-address of node names
PATCH 1/1 ARC: Remove 0x prefix from unit-address of node names
Done automatically with help of:
----------------------->8------------------------
sed -i 's/@0x/@/g' arch/arc/boot/dts/*.dts*
----------------------->8------------------------
Inspired by [1] and the like.
[1] http://kisskb.ellerman.id.au/kisskb/buildresult/13612017/
Signed-off-by Alexey Brodkin <abrodkin at synopsys.com>
Cc Rob Herring <robh+dt at kernel.org>
Signed-off-by Alexey Brodkin <abrodkin at synopsys.com>
--- arch/arc/boot/dts/abilis_tb10x.dtsi | 4 ++-- arch/arc/boot/dts/axc001.dtsi | 6 +++--- arch/arc/boot/dts/axc003.dtsi | 14 +++++++------- arch/arc/boot/dts/axc003_idu.dtsi | 14 +++++++------- arch/arc/boot/dts/axs10x_mb.dtsi | 22 +++++++++++----------- arch/arc/boot/dts/vdk_axc003.dtsi | 4 ++-- arch/arc/boot/dts/vdk_axc003_idu.dtsi | 4 ++-- arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 14 +++++++------- 8 files changed, 41 insertions(+), 41 deletions(-)
arch/arc/boot/dts/abilis_tb10x.dtsi +2 -2
@@ -178,7 +178,7 @@ clocks = <&ahb_clk>; }; - spi0: spi at 0xFE010000 { + spi0: spi at FE010000 { #address-cells = <1>; #size-cells = <0>; cell-index = <0>;
@@ -189,7 +189,7 @@ interrupts = <26 8>; clocks = <&ahb_clk>; }; - spi1: spi at 0xFE011000 { + spi1: spi at FE011000 { #address-cells = <1>; #size-cells = <0>; cell-index = <1>;
arch/arc/boot/dts/axc001.dtsi +3 -3
@@ -41,7 +41,7 @@ * this GPIO block ORs all interrupts on CPU card (creg,..) * to uplink only 1 IRQ to ARC core intc */ - dw-apb-gpio at 0x2000 { + dw-apb-gpio at 2000 { compatible = "snps,dw-apb-gpio"; reg = < 0x2000 0x80 >; #address-cells = <1>;
@@ -60,7 +60,7 @@ }; }; - debug_uart: dw-apb-uart at 0x5000 { + debug_uart: dw-apb-uart at 5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <33333000>;
@@ -88,7 +88,7 @@ * avoid duplicating the MB dtsi file given that IRQ from * this intc to cpu intc are different for axs101 and axs103 */ - mb_intc: dw-apb-ictl at 0xe0012000 { + mb_intc: dw-apb-ictl at e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0x0 0xe0012000 0x0 0x200 >;
arch/arc/boot/dts/axc003.dtsi +7 -7
@@ -55,7 +55,7 @@ * this GPIO block ORs all interrupts on CPU card (creg,..) * to uplink only 1 IRQ to ARC core intc */ - dw-apb-gpio at 0x2000 { + dw-apb-gpio at 2000 { compatible = "snps,dw-apb-gpio"; reg = < 0x2000 0x80 >; #address-cells = <1>;
@@ -74,7 +74,7 @@ }; }; - debug_uart: dw-apb-uart at 0x5000 { + debug_uart: dw-apb-uart at 5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <33333000>;
@@ -102,19 +102,19 @@ * external DMA buffer located outside of IOC aperture. */ axs10x_mb { - ethernet at 0x18000 { + ethernet at 18000 { dma-coherent; }; - ehci at 0x40000 { + ehci at 40000 { dma-coherent; }; - ohci at 0x60000 { + ohci at 60000 { dma-coherent; }; - mmc at 0x15000 { + mmc at 15000 { dma-coherent; }; };
@@ -132,7 +132,7 @@ * avoid duplicating the MB dtsi file given that IRQ from * this intc to cpu intc are different for axs101 and axs103 */ - mb_intc: dw-apb-ictl at 0xe0012000 { + mb_intc: dw-apb-ictl at e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0x0 0xe0012000 0x0 0x200 >;
arch/arc/boot/dts/axc003_idu.dtsi +7 -7
@@ -62,7 +62,7 @@ * this GPIO block ORs all interrupts on CPU card (creg,..) * to uplink only 1 IRQ to ARC core intc */ - dw-apb-gpio at 0x2000 { + dw-apb-gpio at 2000 { compatible = "snps,dw-apb-gpio"; reg = < 0x2000 0x80 >; #address-cells = <1>;
@@ -81,7 +81,7 @@ }; }; - debug_uart: dw-apb-uart at 0x5000 { + debug_uart: dw-apb-uart at 5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <33333000>;
@@ -109,19 +109,19 @@ * external DMA buffer located outside of IOC aperture. */ axs10x_mb { - ethernet at 0x18000 { + ethernet at 18000 { dma-coherent; }; - ehci at 0x40000 { + ehci at 40000 { dma-coherent; }; - ohci at 0x60000 { + ohci at 60000 { dma-coherent; }; - mmc at 0x15000 { + mmc at 15000 { dma-coherent; }; };
@@ -138,7 +138,7 @@ * avoid duplicating the MB dtsi file given that IRQ from * this intc to cpu intc are different for axs101 and axs103 */ - mb_intc: dw-apb-ictl at 0xe0012000 { + mb_intc: dw-apb-ictl at e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0x0 0xe0012000 0x0 0x200 >;
arch/arc/boot/dts/axs10x_mb.dtsi +11 -11
@@ -72,7 +72,7 @@ }; }; - gmac: ethernet at 0x18000 { + gmac: ethernet at 18000 { #interrupt-cells = <1>; compatible = "snps,dwmac"; reg = < 0x18000 0x2000 >;
@@ -88,13 +88,13 @@ mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */ }; - ehci at 0x40000 { + ehci at 40000 { compatible = "generic-ehci"; reg = < 0x40000 0x100 >; interrupts = < 8 >; }; - ohci at 0x60000 { + ohci at 60000 { compatible = "generic-ohci"; reg = < 0x60000 0x100 >; interrupts = < 8 >;
@@ -118,7 +118,7 @@ * dw_mci_pltfm_prepare_command() is used in generic platform * code. */ - mmc at 0x15000 { + mmc at 15000 { compatible = "altr,socfpga-dw-mshc"; reg = < 0x15000 0x400 >; fifo-depth = < 16 >;
@@ -129,7 +129,7 @@ bus-width = < 4 >; }; - uart at 0x20000 { + uart at 20000 { compatible = "snps,dw-apb-uart"; reg = <0x20000 0x100>; clock-frequency = <33333333>;
@@ -139,7 +139,7 @@ reg-io-width = <4>; }; - uart at 0x21000 { + uart at 21000 { compatible = "snps,dw-apb-uart"; reg = <0x21000 0x100>; clock-frequency = <33333333>;
@@ -150,7 +150,7 @@ }; /* UART muxed with USB data port (ttyS3) */ - uart at 0x22000 { + uart at 22000 { compatible = "snps,dw-apb-uart"; reg = <0x22000 0x100>; clock-frequency = <33333333>;
@@ -160,7 +160,7 @@ reg-io-width = <4>; }; - i2c at 0x1d000 { + i2c at 1d000 { compatible = "snps,designware-i2c"; reg = <0x1d000 0x100>; clock-frequency = <400000>;
@@ -177,7 +177,7 @@ #sound-dai-cells = <0>; }; - i2c at 0x1f000 { + i2c at 1f000 { compatible = "snps,designware-i2c"; #address-cells = <1>; #size-cells = <0>;
@@ -218,13 +218,13 @@ }; }; - eeprom at 0x54{ + eeprom at 54{ compatible = "atmel,24c01"; reg = <0x54>; pagesize = <0x8>; }; - eeprom at 0x57{ + eeprom at 57{ compatible = "atmel,24c04"; reg = <0x57>; pagesize = <0x8>;
arch/arc/boot/dts/vdk_axc003.dtsi +2 -2
@@ -36,7 +36,7 @@ #interrupt-cells = <1>; }; - debug_uart: dw-apb-uart at 0x5000 { + debug_uart: dw-apb-uart at 5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <2403200>;
@@ -49,7 +49,7 @@ }; - mb_intc: dw-apb-ictl at 0xe0012000 { + mb_intc: dw-apb-ictl at e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0xe0012000 0x200 >;
arch/arc/boot/dts/vdk_axc003_idu.dtsi +2 -2
@@ -44,7 +44,7 @@ #interrupt-cells = <1>; }; - debug_uart: dw-apb-uart at 0x5000 { + debug_uart: dw-apb-uart at 5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <2403200>;
@@ -57,7 +57,7 @@ }; - mb_intc: dw-apb-ictl at 0xe0012000 { + mb_intc: dw-apb-ictl at e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0xe0012000 0x200 >;
arch/arc/boot/dts/vdk_axs10x_mb.dtsi +7 -7
@@ -36,7 +36,7 @@ }; }; - ethernet at 0x18000 { + ethernet at 18000 { #interrupt-cells = <1>; compatible = "snps,dwmac"; reg = < 0x18000 0x2000 >;
@@ -49,13 +49,13 @@ clock-names = "stmmaceth"; }; - ehci at 0x40000 { + ehci at 40000 { compatible = "generic-ehci"; reg = < 0x40000 0x100 >; interrupts = < 8 >; }; - uart at 0x20000 { + uart at 20000 { compatible = "snps,dw-apb-uart"; reg = <0x20000 0x100>; clock-frequency = <2403200>;
@@ -65,7 +65,7 @@ reg-io-width = <4>; }; - uart at 0x21000 { + uart at 21000 { compatible = "snps,dw-apb-uart"; reg = <0x21000 0x100>; clock-frequency = <2403200>;
@@ -75,7 +75,7 @@ reg-io-width = <4>; }; - uart at 0x22000 { + uart at 22000 { compatible = "snps,dw-apb-uart"; reg = <0x22000 0x100>; clock-frequency = <2403200>;
@@ -101,7 +101,7 @@ interrupt-names = "arc_ps2_irq"; }; - mmc at 0x15000 { + mmc at 15000 { compatible = "snps,dw-mshc"; reg = <0x15000 0x400>; fifo-depth = <1024>;
@@ -119,7 +119,7 @@ * This node is intentionally put outside of MB above becase * it maps areas outside of MB's 0xEz-0xFz. */ - uio_ev: uio at 0xD0000000 { + uio_ev: uio at D0000000 { compatible = "generic-uio"; reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>; reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
Signature · 1 line
2.16.2
Quoted 30 lines · Alexey Brodkin
Done automatically with help of:
----------------------->8------------------------
sed -i 's/@0x/@/g'arch/arc/boot/dts/*.dts*
----------------------->8------------------------Inspired by [1] and the like.
[1] http://kisskb.ellerman.id.au/kisskb/buildresult/13612017/
Signed-off-by Alexey Brodkin <abrodkin at synopsys.com>Cc Rob Herring <robh+dt at kernel.org>Signed-off-by Alexey Brodkin <abrodkin at synopsys.com>--- arch/arc/boot/dts/abilis_tb10x.dtsi | 4 ++-- arch/arc/boot/dts/axc001.dtsi | 6 +++--- arch/arc/boot/dts/axc003.dtsi | 14 +++++++------- arch/arc/boot/dts/axc003_idu.dtsi | 14 +++++++------- arch/arc/boot/dts/axs10x_mb.dtsi | 22 +++++++++++----------- arch/arc/boot/dts/vdk_axc003.dtsi | 4 ++-- arch/arc/boot/dts/vdk_axc003_idu.dtsi | 4 ++-- arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 14 +++++++------- 8 files changed, 41 insertions(+), 41 deletions(-)arch/arc/boot/dts/abilis_tb10x.dtsi +0
-0
arch/arc/boot/dts/abilis_tb10x.dtsi line 181
Quoted 5 lines
arch/arc/boot/dts/abilis_tb10x.dtsi +1
-1@@ -178,7 +178,7 @@ clocks = <&ahb_clk>; }; - spi0: spi at 0xFE010000 { + spi0: spi at FE010000 {
This should be lowercase too.
Quoted 3 lines
arch/arc/boot/dts/abilis_tb10x.dtsi +0
-0#address-cells = <1>; #size-cells = <0>; cell-index = <0>;
[...]
arch/arc/boot/dts/abilis_tb10x.dtsi line 122
Quoted 6 lines
arch/arc/boot/dts/abilis_tb10x.dtsi +1
-1@@ -119,7 +119,7 @@ * This node is intentionally put outside of MB above becase * it maps areas outside of MB's 0xEz-0xFz. */ - uio_ev: uio at 0xD0000000 { + uio_ev: uio at D0000000 {
lowercase
Quoted 6 lines
arch/arc/boot/dts/abilis_tb10x.dtsi +0
-1compatible = "generic-uio"; reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>; reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem"; --2.16.2
Hi Rob,
Quoted 46 lines · Rob Herring
Quoted 30 lines · Alexey Brodkin
Done automatically with help of:
----------------------->8------------------------
sed -i 's/@0x/@/g'arch/arc/boot/dts/*.dts*
----------------------->8------------------------Inspired by [1] and the like.
Signed-off-by Alexey Brodkin <abrodkin at synopsys.com>Cc Rob Herring <robh+dt at kernel.org>Signed-off-by Alexey Brodkin <abrodkin at synopsys.com>--- arch/arc/boot/dts/abilis_tb10x.dtsi | 4 ++-- arch/arc/boot/dts/axc001.dtsi | 6 +++--- arch/arc/boot/dts/axc003.dtsi | 14 +++++++------- arch/arc/boot/dts/axc003_idu.dtsi | 14 +++++++------- arch/arc/boot/dts/axs10x_mb.dtsi | 22 +++++++++++----------- arch/arc/boot/dts/vdk_axc003.dtsi | 4 ++-- arch/arc/boot/dts/vdk_axc003_idu.dtsi | 4 ++-- arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 14 +++++++------- 8 files changed, 41 insertions(+), 41 deletions(-)arch/arc/boot/dts/abilis_tb10x.dtsi +0
-0arch/arc/boot/dts/abilis_tb10x.dtsi line 181
Quoted 5 lines
arch/arc/boot/dts/abilis_tb10x.dtsi +1
-1@@ -178,7 +178,7 @@ clocks = <&ahb_clk>; }; - spi0: spi at 0xFE010000 { + spi0: spi at FE010000 {This should be lowercase too.
Quoted 3 lines
arch/arc/boot/dts/abilis_tb10x.dtsi +0
-0#address-cells = <1>; #size-cells = <0>; cell-index = <0>;[...]
Quoted 11 lines
arch/arc/boot/dts/abilis_tb10x.dtsi line 122
Quoted 6 lines
arch/arc/boot/dts/abilis_tb10x.dtsi +1
-1@@ -119,7 +119,7 @@ * This node is intentionally put outside of MB above becase * it maps areas outside of MB's 0xEz-0xFz. */ - uio_ev: uio at 0xD0000000 { + uio_ev: uio at D0000000 {lowercase
Quoted 2 lines
arch/arc/boot/dts/abilis_tb10x.dtsi +0
-0compatible = "generic-uio"; reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
I guess real addresses should be lower-case too, right?
-Alexey