block: Restore tape support
Subsystems (2)
PATCH 1/1 block: Restore tape support
According to what I found in
https://bugzilla.kernel.org/show_bug.cgi?id=201935 patch "block: Clear kernel memory before copying to user" broke tape access. Hence revert that patch.
--- block/bio.c | 1 - 1 file changed, 1 deletion(-)
block/bio.c +0 -1
@@ -1262,7 +1262,6 @@ struct bio *bio_copy_user_iov(struct request_queue *q,if (ret) goto cleanup; }else { -zero_fill_bio (bio);iov_iter_advance (iter, bio->bi_iter.bi_size); }
Signature · 1 line
2.19.2
Quoted 4 lines · Bart Van Assche
According to what I found in
https://bugzilla.kernel.org/show_bug.cgi?id=201935 patch "block: Clear kernel memory before copying to user" broke tape access. Hence revert that patch.
This looks wrong. The patch from Keith is obviously correct for normal usage of bio_copy_user_iov. The SCSI tape drivers use the somewhat odd null_mapped case, so we probably need to refine the checks for that a bit.
Quoted 8 lines · Christoph Hellwig
Quoted 6 lines · Bart Van Assche
According to what I found in
https://bugzilla.kernel.org/show_bug.cgi?id=201935 patch "block:
Clear
kernel memory before copying to user" broke tape access. Hence revert
that patch.
Quoted 5 lines
This looks wrong. The patch from Keith is obviously correct for normal usage of bio_copy_user_iov. The SCSI tape drivers use the somewhat odd
null_mappedcase, so we probably need to refine the checks
for that a bit.
I am going to look into that, just connected a tape device so I can reproduce and then see what we need to make it more specific in the st driver.
I may need help from folks who understand the bio stuff better than I do.
Back when I have more.
Regards
Laurence
Quoted 4 lines · Bart Van Assche
According to what I found in
https://bugzilla.kernel.org/show_bug.cgi?id=201935 patch "block: Clear kernel memory before copying to user" broke tape access. Hence revert that patch.
Instead of reverting back to the leaking arbitrary kernel memory, why not just make a fix on top of it? This should do it:
---
block/bio.c +2 -1
@@ -1262,7 +1262,8 @@ struct bio *bio_copy_user_iov(struct request_queue *q,if (ret) goto cleanup; }else { -zero_fill_bio (bio); +if (bmd->is_our_pages) +zero_fill_bio (bio);iov_iter_advance (iter, bio->bi_iter.bi_size); }
--
Jens Axboe
maintainerQuoted 15 lines · Keith Busch
Quoted 4 lines · Bart Van Assche
According to what I found in
https://bugzilla.kernel.org/show_bug.cgi?id=201935 patch "block: Clear kernel memory before copying to user" broke tape access. Hence revert that patch.Instead of reverting back to the leaking arbitrary kernel memory, why not just make a fix on top of it? This should do it:
---
block/bio.c +0
-0
block/bio.c struct bio *bio_copy_user_iov(struct request_queue *q, · line 1269
Quoted 9 lines
block/bio.c +2
-1@@ -1262,7 +1262,8 @@ struct bio *bio_copy_user_iov(struct request_queue *q,if (ret) goto cleanup; }else { -zero_fill_bio (bio); +if (bmd->is_our_pages) +zero_fill_bio (bio);iov_iter_advance (iter, bio->bi_iter.bi_size); }
That should be fine, the other case is user mapped memory anyway.
Signature · 1 line
Jens Axboe
Quoted 23 lines · Jens Axboe
Quoted 22 lines · Keith Busch
Quoted 6 lines · Bart Van Assche
According to what I found in
https://bugzilla.kernel.org/show_bug.cgi?id=201935 patch "block:
Clear
kernel memory before copying to user" broke tape access. Hence revert
that patch.Instead of reverting back to the leaking arbitrary kernel memory, why
not just make a fix on top of it? This should do it:---
block/bio.c +0
-0@@ -1262,7 +1262,8 @@ struct bio *bio_copy_user_iov(structrequest_queue *q, if (ret) goto cleanup; } else {
Quoted 9 lines
Quoted 6 lines
block/bio.c +2
-1-zero_fill_bio (bio); +if (bmd->is_our_pages) +zero_fill_bio (bio); iov_iter_advance(iter, bio->bi_iter.bi_size); }That should be fine, the other case is user mapped memory anyway.
OK, I will test this today
Thanks folks!!
Laurence
Laurence Oberman
Tested-byQuoted 26 lines · Keith Busch
Quoted 6 lines · Bart Van Assche
According to what I found in
https://bugzilla.kernel.org/show_bug.cgi?id=201935 patch "block:
Clear
kernel memory before copying to user" broke tape access. Hence revert
that patch.Instead of reverting back to the leaking arbitrary kernel memory, why not just make a fix on top of it? This should do it:
---
block/bio.c +2
-1@@ -1262,7 +1262,8 @@ struct bio *bio_copy_user_iov(structrequest_queue *q, if (ret) goto cleanup; } else { -zero_fill_bio (bio); +if (bmd->is_our_pages) +zero_fill_bio (bio); iov_iter_advance(iter, bio->bi_iter.bi_size); }
Quoted 2 lines
--
Reproduced on 4.20-rc6
# tar cvf /dev/st0 /etc ... Showed data was written in tar However listing is empty, data not actually written
# tar tvf /dev/st0 #
Then:
Applied Keith Patch
# tar cvf /dev/st0 /etc ...
# tar tvf /dev/st0
Data was written and can be read
..drwxr-xr-x root/root 0 2018-10-31 08:41 etc/fwupd/ -rw-r--r-- root/root 292 2018-06-07 08:27 etc/fwupd/daemon.conf drwxr-xr-x root/root 0 2018-10-31 08:41 etc/fwupd/remotes.d/ -rw-r--r-- root/root 181 2018-09-05 06:00 etc/fwupd/remotes.d/fwupd.conf
-rw-r--r-- root/root 327 2018-06-07 08:27 etc/fwupd/remotes.d/lvfs-testing.conf
-rw-r--r-- root/root 283 2018-09-05 06:00 etc/fwupd/remotes.d/lvfs.conf
-rw-r--r-- root/root 283 2018-09-05 06:00 etc/fwupd/remotes.d/vendor.conf
-rw-r--r-- root/root 118 2018-09-05 06:00 etc/fwupd/uefi.conf -r--r----- root/root 4328 2018-09-25 01:57 etc/sudoers.rpmnew -rw-r--r-- root/root 2331 2018-11-02 14:50 etc/hercules.cnf -rw-r--r-- root/root 147 2018-11-06 17:08 etc/minirc.p2000
[ 96.272548] st 2:0:0:0: [st0] Block limits 1 - 16777215 bytes. [ 96.300782] st 2:0:0:0: [st0] Mode sense. Length 11, medium 0, WBS 10, BLL 8
[ 96.334985] st 2:0:0:0: [st0] Density 58, tape length: 0, drv
buffer: 1
[ 96.367366] st 2:0:0:0: [st0] Block size: 0, buffer size: 4096 (1 blocks).
[ 97.197209] st 2:0:0:0: [st0] Rewinding tape.
[ 103.104429] st 2:0:0:0: [st0] Block limits 1 - 16777215 bytes. [ 103.133142] st 2:0:0:0: [st0] Mode sense. Length 11, medium 0, WBS 10, BLL 8
[ 103.167421] st 2:0:0:0: [st0] Density 58, tape length: 0, drv
buffer: 1
[ 103.199711] st 2:0:0:0: [st0] Block size: 0, buffer size: 4096 (1 blocks).
[ 104.109081] st 2:0:0:0: [st0] Rewinding tape.
Tested and works fine.
Thanks All
Quoted 4 lines · Laurence Oberman
Tested and works fine.
Thanks AllTested-by Laurence Oberman <[email protected]>
Cool, thank you for confirming.
----- Message from Keith Busch <[email protected]> ---------
Date: Mon, 10 Dec 2018 13:26:47 -0700
From: Keith Busch <[email protected]>
Subject: Re: [PATCH] block: Restore tape support
To: Laurence Oberman <[email protected]>
Cc: Bart Van Assche <[email protected]>, Jens Axboe
<[email protected]>, [email protected], Christoph Hellwig <[email protected]>, Todd Aiken <[email protected]>, [email protected]
Quoted 7 lines · Laurence Oberman
Quoted 4 lines
Tested and works fine.
Thanks AllTested-by Laurence Oberman <[email protected]>Cool, thank you for confirming.
I can also confirm that this fix works fine on my system.
----- End message from Keith Busch <[email protected]> -----