Skip to contentSkip to conversation

iio: chemical: sgp30: add device tree support

PATCH In review Andreas Brauchli 3 participants 3 messages Dec 13, 2018 – Dec 17, 2018

Subsystems (2)
Device tree bindings IIO
lore
Share & tools
lore

Andreas Brauchli

author
#0 lore raw

PATCH v3 3/3 iio: chemical: sgp30: add device tree support

Add device tree support for Sensirion SGP30/SGPC3 gas sensors.

Signed-off-by Andreas Brauchli <[email protected]>
---
 .../bindings/iio/chemical/sensirion,sgp30.txt     | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/chemical/sensirion,sgp30.txt
Documentation/devicetree/bindings/iio/chemical/sensirion,sgp30.txt new file +15 -0
new file mode 100644
index 000000000000..5844ed58173c
@@ -0,0 +1,15 @@
+* Sensirion SGP30/SGPC3 multi-pixel Gas Sensor
+
+Required properties:
+
+  - compatible: must be one of
+    "sensirion,sgp30"
+    "sensirion,sgpc3"
+  - reg: the I2C address of the sensor
+
+Example:
+
+gas@58 {
+	compatible = "sensirion,sgp30";
+	reg = <0x58>;
+};
Signature · 1 line
2.17.1
maintainer
#1 lore raw
Quoted 3 lines · On Thu, 13 Dec 2018 15:44:18 +0100 Andreas Brauchli…

Add device tree support for Sensirion SGP30/SGPC3 gas sensors.

Signed-off-by Andreas Brauchli <[email protected]>

Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it.

Note this missed (by about a week) the cut off for the current cycle, so this will be in the second one of the new year.

Jonathan

Quoted 26 lines
---
 .../bindings/iio/chemical/sensirion,sgp30.txt     | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/chemical/sensirion,sgp30.txt
Documentation/devicetree/bindings/iio/chemical/sensirion,sgp30.txt new file +15 -0
new file mode 100644
index 000000000000..5844ed58173c
@@ -0,0 +1,15 @@
+* Sensirion SGP30/SGPC3 multi-pixel Gas Sensor
+
+Required properties:
+
+  - compatible: must be one of
+    "sensirion,sgp30"
+    "sensirion,sgpc3"
+  - reg: the I2C address of the sensor
+
+Example:
+
+gas@58 {
+	compatible = "sensirion,sgp30";
+	reg = <0x58>;
+};