ARM: dts: rockchip: add focaltech touchscreen to rk3188-bqedison2qc
Subsystems (2)
Heiko Stuebner
maintainerPATCH 1/1 ARM: dts: rockchip: add focaltech touchscreen to rk3188-bqedison2qc
From: Heiko Stuebner <[email protected]>
The Edison tablet uses a Focaltech touchscreen, with one speciality that the touchscreen resolution doesn't match the display resolution (1024x768 vs. 1280x600) which userspace will have to compensate for.
Signed-off-by Heiko Stuebner <[email protected]>
--- arch/arm/boot/dts/rk3188-bqedison2qc.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
arch/arm/boot/dts/rk3188-bqedison2qc.dts +15 -0
@@ -408,6 +408,21 @@ &i2c2 { clock-frequency = <400000>; status = "okay"; + + ft5606: touchscreen@3e { + compatible = "edt,edt-ft5506"; + reg = <0x3e>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int &tp_rst>; + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; + touchscreen-inverted-y; + /* hw ts resolution does not match display */ + touchscreen-size-y = <1024>; + touchscreen-size-x = <768>; + touchscreen-swapped-x-y; + }; }; &i2c3 {
Signature · 1 line
2.19.2