bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw

PATCH Applied Ivan Mironov 3 participants 3 messages Dec 24, 2018

Subsystems (3)

Networking Network drivers Broadcom BNX2X 10 gigabit Ethernet driver

lore

Share & tools

lore

Ivan Mironov

author

2018-12-24 15:13 UTC #0 lore raw

PATCH v2 1/1 bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw

This happened when I tried to boot normal Fedora 29 system with latest available kernel (from fedora rawhide, plus some unrelated custom patches):

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
	PGD 0 P4D 0
	Oops: 0010 [#1] SMP PTI
	CPU: 6 PID: 1422 Comm: libvirtd Tainted: G          I       4.20.0-0.rc7.git3.hpsa2.1.fc29.x86_64 #1
	Hardware name: HP ProLiant BL460c G6, BIOS I24 05/21/2018
	RIP: 0010:          (null)
	Code: Bad RIP value.
	RSP: 0018:ffffa47ccdc9fbe0 EFLAGS: 00010246
	RAX: 0000000000000000 RBX: 00000000000003e8 RCX: ffffa47ccdc9fbf8
	RDX: ffffa47ccdc9fc00 RSI: ffff97d9ee7b01f8 RDI: ffff97d9f0150b80
	RBP: ffff97d9f0150b80 R08: 0000000000000000 R09: 0000000000000000
	R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003
	R13: ffff97d9ef1e53e8 R14: 0000000000000009 R15: ffff97d9f0ac6730
	FS:  00007f4d224ef700(0000) GS:ffff97d9fa200000(0000) knlGS:0000000000000000
	CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
	CR2: ffffffffffffffd6 CR3: 00000011ece52006 CR4: 00000000000206e0
	Call Trace:
	 ? bnx2x_chip_cleanup+0x195/0x610 [bnx2x]
	 ? bnx2x_nic_unload+0x1e2/0x8f0 [bnx2x]
	 ? bnx2x_reload_if_running+0x24/0x40 [bnx2x]
	 ? bnx2x_set_features+0x79/0xa0 [bnx2x]
	 ? __netdev_update_features+0x244/0x9e0
	 ? netlink_broadcast_filtered+0x136/0x4b0
	 ? netdev_update_features+0x22/0x60
	 ? dev_disable_lro+0x1c/0xe0
	 ? devinet_sysctl_forward+0x1c6/0x211
	 ? proc_sys_call_handler+0xab/0x100
	 ? __vfs_write+0x36/0x1a0
	 ? rcu_read_lock_sched_held+0x79/0x80
	 ? rcu_sync_lockdep_assert+0x2e/0x60
	 ? __sb_start_write+0x14c/0x1b0
	 ? vfs_write+0x159/0x1c0
	 ? vfs_write+0xba/0x1c0
	 ? ksys_write+0x52/0xc0
	 ? do_syscall_64+0x60/0x1f0
	 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe

After some investigation I figured out that recently added cleanup code tries to call VLAN filtering de-initialization function which exist only for newer hardware. Corresponding function pointer is not set (== 0) for older hardware, namely these chips:

	#define CHIP_NUM_57710			0x164e
	#define CHIP_NUM_57711			0x164f
	#define CHIP_NUM_57711E			0x1650

And I have one of those in my test system:

Broadcom Inc. and subsidiaries NetXtreme II BCM57711E 10-Gigabit PCIe [14e4:1650]

Function bnx2x_init_vlan_mac_fp_objs() from drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h decides whether to initialize relevant pointers in bnx2x_sp_objs.vlan_obj or not.

This regression was introduced after v4.20-rc7, and still exists in v4.20 release.

Fixes 04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence.")

Signed-off-by Ivan Mironov <[email protected]>

---
v2:
- As suggested by Sudarsana Reddy Kalluru, do not call bnx2x_del_all_vlans() at all if (!CHIP_IS_E1x(bp)).
v1:
- Check for chip num instead of (vlan_obj->delete_all != 0).
v0:
- Patch introduced.

---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +10 -4

index b164f705709d..3b5b47e98c73 100644
@@ -9360,10 +9360,16 @@ void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode, bool keep_link)
 		BNX2X_ERR("Failed to schedule DEL commands for UC MACs list: %d\n",
 			  rc);
 
-	/* Remove all currently configured VLANs */
-	rc = bnx2x_del_all_vlans(bp);
-	if (rc < 0)
-		BNX2X_ERR("Failed to delete all VLANs\n");
+	/* The whole *vlan_obj structure may be not initialized if VLAN
+	 * filtering offload is not supported by hardware. Currently this is
+	 * true for all hardware covered by CHIP_IS_E1x().
+	 */
+	if (!CHIP_IS_E1x(bp)) {
+		/* Remove all currently configured VLANs */
+		rc = bnx2x_del_all_vlans(bp);
+		if (rc < 0)
+			BNX2X_ERR("Failed to delete all VLANs\n");
+	}
 
 	/* Disable LLH */
 	if (!CHIP_IS_E1(bp))

Signature · 1 line

2.20.1

Sudarsana Reddy Kalluru

maintainer Acked-by Sudarsana Kalluru on v2 1/1

2018-12-24 16:06 UTC #1 lore raw

-----Original Message-----
From: Ivan Mironov [mailto:[email protected]]
Sent: 24 December 2018 20:43
To: [email protected]
Cc: Ariel Elior <[email protected]>; Sudarsana Kalluru <[email protected]>; [email protected]; David S. Miller <[email protected]>; [email protected]; Sudarsana Reddy Kalluru <[email protected]>; Ivan Mironov <[email protected]>
Subject: [EXT] [PATCH v2] bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw

External Email

----------------------------------------------------------------------
This happened when I tried to boot normal Fedora 29 system with latest available kernel (from fedora rawhide, plus some unrelated custom patches):

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
	PGD 0 P4D 0
	Oops: 0010 [#1] SMP PTI
	CPU: 6 PID: 1422 Comm: libvirtd Tainted: G          I       4.20.0-0.rc7.git3.hpsa2.1.fc29.x86_64 #1
	Hardware name: HP ProLiant BL460c G6, BIOS I24 05/21/2018
	RIP: 0010:          (null)
	Code: Bad RIP value.
	RSP: 0018:ffffa47ccdc9fbe0 EFLAGS: 00010246
	RAX: 0000000000000000 RBX: 00000000000003e8 RCX: ffffa47ccdc9fbf8
	RDX: ffffa47ccdc9fc00 RSI: ffff97d9ee7b01f8 RDI: ffff97d9f0150b80
	RBP: ffff97d9f0150b80 R08: 0000000000000000 R09: 0000000000000000
	R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003
	R13: ffff97d9ef1e53e8 R14: 0000000000000009 R15: ffff97d9f0ac6730
	FS:  00007f4d224ef700(0000) GS:ffff97d9fa200000(0000) knlGS:0000000000000000
	CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
	CR2: ffffffffffffffd6 CR3: 00000011ece52006 CR4: 00000000000206e0
	Call Trace:
	 ? bnx2x_chip_cleanup+0x195/0x610 [bnx2x]
	 ? bnx2x_nic_unload+0x1e2/0x8f0 [bnx2x]
	 ? bnx2x_reload_if_running+0x24/0x40 [bnx2x]
	 ? bnx2x_set_features+0x79/0xa0 [bnx2x]
	 ? __netdev_update_features+0x244/0x9e0
	 ? netlink_broadcast_filtered+0x136/0x4b0
	 ? netdev_update_features+0x22/0x60
	 ? dev_disable_lro+0x1c/0xe0
	 ? devinet_sysctl_forward+0x1c6/0x211
	 ? proc_sys_call_handler+0xab/0x100
	 ? __vfs_write+0x36/0x1a0
	 ? rcu_read_lock_sched_held+0x79/0x80
	 ? rcu_sync_lockdep_assert+0x2e/0x60
	 ? __sb_start_write+0x14c/0x1b0
	 ? vfs_write+0x159/0x1c0
	 ? vfs_write+0xba/0x1c0
	 ? ksys_write+0x52/0xc0
	 ? do_syscall_64+0x60/0x1f0
	 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe

	#define CHIP_NUM_57710			0x164e
	#define CHIP_NUM_57711			0x164f
	#define CHIP_NUM_57711E			0x1650

And I have one of those in my test system:

Broadcom Inc. and subsidiaries NetXtreme II BCM57711E 10-Gigabit PCIe [14e4:1650]

Function bnx2x_init_vlan_mac_fp_objs() from drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h decides whether to initialize relevant pointers in bnx2x_sp_objs.vlan_obj or not.

This regression was introduced after v4.20-rc7, and still exists in v4.20 release.

Fixes 04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence.")

Signed-off-by Ivan Mironov <[email protected]>

---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +10 -4

index b164f705709d..3b5b47e98c73 100644
@@ -9360,10 +9360,16 @@ void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode, bool keep_link)
 		BNX2X_ERR("Failed to schedule DEL commands for UC MACs list: %d\n",
 			  rc);
 
-	/* Remove all currently configured VLANs */
-	rc = bnx2x_del_all_vlans(bp);
-	if (rc < 0)
-		BNX2X_ERR("Failed to delete all VLANs\n");
+	/* The whole *vlan_obj structure may be not initialized if VLAN
+	 * filtering offload is not supported by hardware. Currently this is
+	 * true for all hardware covered by CHIP_IS_E1x().
+	 */
+	if (!CHIP_IS_E1x(bp)) {
+		/* Remove all currently configured VLANs */
+		rc = bnx2x_del_all_vlans(bp);
+		if (rc < 0)
+			BNX2X_ERR("Failed to delete all VLANs\n");
+	}
 
 	/* Disable LLH */
 	if (!CHIP_IS_E1(bp))

--
2.20.1

Thanks for the changes.

Acked-by Sudarsana Kalluru <[email protected]>

David Miller

maintainer Applied

2018-12-24 22:46 UTC #2 lore raw

In reply to Ivan Mironov

From: Ivan Mironov <[email protected]>
Date: Mon, 24 Dec 2018 20:13:05 +0500

Quoted 3 lines

This happened when I tried to boot normal Fedora 29 system with latest available kernel (from fedora rawhide, plus some unrelated custom patches):

...

Quoted 17 lines

After some investigation I figured out that recently added cleanup code tries to call VLAN filtering de-initialization function which exist only for newer hardware. Corresponding function pointer is not set (== 0) for older hardware, namely these chips:
	#define CHIP_NUM_57710			0x164e
	#define CHIP_NUM_57711			0x164f
	#define CHIP_NUM_57711E			0x1650
And I have one of those in my test system:
Broadcom Inc. and subsidiaries NetXtreme II BCM57711E 10-Gigabit PCIe [14e4:1650]
Function bnx2x_init_vlan_mac_fp_objs() from drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h decides whether to initialize relevant pointers in bnx2x_sp_objs.vlan_obj or not.

Quoted 5 lines

This regression was introduced after v4.20-rc7, and still exists in v4.20 release.
Fixes 04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence.")
Signed-off-by Ivan Mironov <[email protected]>

Applied, thanks.