powerpc: Fix COFF zImage booting on old powermacs

From: Paul Mackerras <[email protected]>

[ Upstream commit 5564597d51c8ff5b88d95c76255e18b13b760879 ]

Commit 6975a783d7b4 ("powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN", 2011-04-12) changed the procedure descriptor at the start of crt0.S to have a hard-coded start address of 0x500000 rather than a reference to _zimage_start, presumably because having a reference to a symbol introduced a relocation which is awkward to handle in a position-independent executable. Unfortunately, what is at 0x500000 in the COFF image is not the first instruction, but the procedure descriptor itself, that is, a word containing 0x500000, which is not a valid instruction. Hence, booting a COFF zImage results in a "DEFAULT CATCH!, code=FFF00700" message from Open Firmware.

This fixes the problem by (a) putting the procedure descriptor in the data section and (b) adding a branch to _zimage_start as the first instruction in the program.

---
 arch/powerpc/boot/crt0.S | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index 5c2199857aa8..a3550e8f1a77 100644
@@ -15,7 +15,7 @@
 RELA = 7
 RELACOUNT = 0x6ffffff9
 
-	.text
+	.data
 	/* A procedure descriptor used when booting this as a COFF file.
 	 * When making COFF, this comes first in the link and we're
 	 * linked at 0x500000.

@@ -23,6 +23,8 @@ RELACOUNT = 0x6ffffff9
 	.globl	_zimage_start_opd
 _zimage_start_opd:
 	.long	0x500000, 0, 0, 0
+	.text
+	b	_zimage_start
 
 #ifdef __powerpc64__
 .balign 8

2.19.1

From: Anson Huang <[email protected]>

[ Upstream commit 1e434b703248580b7aaaf8a115d93e682f57d29f ]

The sw2iso count should cover ARM LDO ramp-up time, the MAX ARM LDO ramp-up time may be up to more than 100us on some boards, this patch sets sw2iso to 0xf (~384us) which is the reset value, and it is much more safe to cover different boards, since we have observed that some customer boards failed with current setting of 0x2.

---
 arch/arm/mach-imx/cpuidle-imx6sx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 3c6672b3796b..7f5df8992008 100644
@@ -97,7 +97,7 @@ int __init imx6sx_cpuidle_init(void)
 	 * except for power up sw2iso which need to be
 	 * larger than LDO ramp up time.
 	 */
-	imx_gpc_set_arm_power_up_timing(2, 1);
+	imx_gpc_set_arm_power_up_timing(0xf, 1);
 	imx_gpc_set_arm_power_down_timing(1, 1);
 
 	return cpuidle_register(&imx6sx_cpuidle_driver, NULL);

2.19.1

From: Peter Hutterer <[email protected]>

[ Upstream commit c201e3808e0e4be9b98d192802085a9f491bd80c ]

ABS_RESERVED was added in d9ca1c990a7 and accidentally removed as part of ffe0e7cf290f5c9 when the high-resolution scrolling code was removed.

---
 include/uapi/linux/input-event-codes.h | 9 +++++++++
 1 file changed, 9 insertions(+)

index 87cf351bab03..9e07bf4259e1 100644
@@ -708,6 +708,15 @@
 
 #define ABS_MISC		0x28
 
+/*
+ * 0x2e is reserved and should not be used in input drivers.
+ * It was used by HID as ABS_MISC+6 and userspace needs to detect if
+ * the next ABS_* event is correct or is just ABS_MISC + n.
+ * We define here ABS_RESERVED so userspace can rely on it and detect
+ * the situation described above.
+ */
+#define ABS_RESERVED		0x2e
+
 #define ABS_MT_SLOT		0x2f	/* MT slot being modified */
 #define ABS_MT_TOUCH_MAJOR	0x30	/* Major axis of touching ellipse */
 #define ABS_MT_TOUCH_MINOR	0x31	/* Minor axis (omit if circular) */

2.19.1

From: Qian Cai <[email protected]>

[ Upstream commit f1733a1d3cd32a9492f4cf866be37bb46e10163d ]

There is actually a space after "sp," like this,

    ffff2000080813c8:       a9bb7bfd        stp     x29, x30, [sp, #-80]!

Right now, checkstack.pl isn't able to print anything on aarch64, because it won't be able to match the stating objdump line of a function due to this missing space. Hence, it displays every stack as zero-size.

After this patch, checkpatch.pl is able to match the start of a function's objdump, and is then able to calculate each function's stack correctly.

---
 scripts/checkstack.pl | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index dd8397894d5c..12a6940741fe 100755
@@ -46,8 +46,8 @@ my (@stack, $re, $dre, $x, $xs, $funcre);
 	$xs	= "[0-9a-f ]";	# hex character or space
 	$funcre = qr/^$x* <(.*)>:$/;
 	if ($arch eq 'aarch64') {
-		#ffffffc0006325cc:       a9bb7bfd        stp     x29, x30, [sp,#-80]!
-		$re = qr/^.*stp.*sp,\#-([0-9]{1,8})\]\!/o;
+		#ffffffc0006325cc:       a9bb7bfd        stp     x29, x30, [sp, #-80]!
+		$re = qr/^.*stp.*sp, \#-([0-9]{1,8})\]\!/o;
 	} elsif ($arch eq 'arm') {
 		#c0008ffc:	e24dd064	sub	sp, sp, #100	; 0x64
 		$re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;

2.19.1

From: Benjamin Poirier <[email protected]>

[ Upstream commit ca92e173ab34a4f7fc4128bd372bd96f1af6f507 ]

sadhcnt is reported by ip -s xfrm state count as "buckets count", not the hash mask.

---
 net/xfrm/xfrm_state.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 9b6e51450fc5..13f261feb75c 100644
@@ -623,7 +623,7 @@ void xfrm_sad_getinfo(struct net *net, struct xfrmk_sadinfo *si)
 {
 	spin_lock_bh(&net->xfrm.xfrm_state_lock);
 	si->sadcnt = net->xfrm.state_num;
-	si->sadhcnt = net->xfrm.state_hmask;
+	si->sadhcnt = net->xfrm.state_hmask + 1;
 	si->sadhmcnt = xfrm_state_hashmax;
 	spin_unlock_bh(&net->xfrm.xfrm_state_lock);
 }

2.19.1

From: Dan Carpenter <[email protected]>

[ Upstream commit 9ae4f8420ed7be4b13c96600e3568c144d101a23 ]

If "interface" is NULL then we can't release it and trying to will only lead to an Oops.

---
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index d0b227ffbd5f..573aeec7a02b 100644
@@ -2279,7 +2279,7 @@ static int _bnx2fc_create(struct net_device *netdev,
 	if (!interface) {
 		printk(KERN_ERR PFX "bnx2fc_interface_create failed\n");
 		rc = -ENOMEM;
-		goto ifput_err;
+		goto netdev_err;
 	}
 
 	if (netdev->priv_flags & IFF_802_1Q_VLAN) {

2.19.1

From: Tony Lindgren <[email protected]>

[ Upstream commit e2ca26ec4f01486661b55b03597c13e2b9c18b73 ]

With PM enabled, I noticed that pressing a key on the droid4 keyboard will block deeper idle states for the SoC. Let's fix this by using IRQF_ONESHOT and stop constantly toggling the device OMAP4_KBD_IRQENABLE register as suggested by Dmitry Torokhov <[email protected]>.

for OMAP4_KBD_IRQENABLE and OMAP4_KBD_WAKEUPENABLE together to avoid blocking deeper SoC idle states. And with toggling of OMAP4_KBD_IRQENABLE register now gone with IRQF_ONESHOT, also the SoC idle state problem is gone during runtime. We still also need to clear OMAP4_KBD_WAKEUPENABLE in omap4_keypad_close() though to pair it with omap4_keypad_open() to prevent blocking deeper SoC idle states after rmmod omap4-keypad.

---
 drivers/input/keyboard/omap4-keypad.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

index f78c464899db..3d2c60c8de83 100644
@@ -126,12 +126,8 @@ static irqreturn_t omap4_keypad_irq_handler(int irq, void *dev_id)
 {
 	struct omap4_keypad *keypad_data = dev_id;
 
-	if (kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)) {
-		/* Disable interrupts */
-		kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
-				 OMAP4_VAL_IRQDISABLE);
+	if (kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS))
 		return IRQ_WAKE_THREAD;
-	}
 
 	return IRQ_NONE;
 }

@@ -173,11 +169,6 @@ static irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id)
 	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
 			 kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
 
-	/* enable interrupts */
-	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
-		OMAP4_DEF_IRQENABLE_EVENTEN |
-				OMAP4_DEF_IRQENABLE_LONGKEY);
-
 	return IRQ_HANDLED;
 }
 

@@ -214,9 +205,10 @@ static void omap4_keypad_close(struct input_dev *input)
 
 	disable_irq(keypad_data->irq);
 
-	/* Disable interrupts */
+	/* Disable interrupts and wake-up events */
 	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
 			 OMAP4_VAL_IRQDISABLE);
+	kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, 0);
 
 	/* clear pending interrupts */
 	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,

@@ -364,7 +356,7 @@ static int omap4_keypad_probe(struct platform_device *pdev)
 	}
 
 	error = request_threaded_irq(keypad_data->irq, omap4_keypad_irq_handler,
-				     omap4_keypad_irq_thread_fn, 0,
+				     omap4_keypad_irq_thread_fn, IRQF_ONESHOT,
 				     "omap4-keypad", keypad_data);
 	if (error) {
 		dev_err(&pdev->dev, "failed to register interrupt\n");

2.19.1

From: Hui Peng <[email protected]>

[ Upstream commit 5146f95df782b0ac61abde36567e718692725c89 ]

The function hso_probe reads if_num from the USB device (as an u8) and uses it without a length check to index an array, resulting in an OOB memory read in hso_probe or hso_get_config_data.

Add a length check for both locations and updated hso_probe to bail on error.

This issue has been assigned CVE-2018-19985.

---
 drivers/net/usb/hso.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

index 111d907e0c11..79cede19e0c4 100644
@@ -2825,6 +2825,12 @@ static int hso_get_config_data(struct usb_interface *interface)
 		return -EIO;
 	}
 
+	/* check if we have a valid interface */
+	if (if_num > 16) {
+		kfree(config_data);
+		return -EINVAL;
+	}
+
 	switch (config_data[if_num]) {
 	case 0x0:
 		result = 0;

@@ -2895,10 +2901,18 @@ static int hso_probe(struct usb_interface *interface,
 
 	/* Get the interface/port specification from either driver_info or from
 	 * the device itself */
-	if (id->driver_info)
+	if (id->driver_info) {
+		/* if_num is controlled by the device, driver_info is a 0 terminated
+		 * array. Make sure, the access is in bounds! */
+		for (i = 0; i <= if_num; ++i)
+			if (((u32 *)(id->driver_info))[i] == 0)
+				goto exit;
 		port_spec = ((u32 *)(id->driver_info))[if_num];
-	else
+	} else {
 		port_spec = hso_get_config_data(interface);
+		if (port_spec < 0)
+			goto exit;
+	}
 
 	/* Check if we need to switch to alt interfaces prior to port
 	 * configuration */

2.19.1

From: Sudarsana Reddy Kalluru <[email protected]>

[ Upstream commit bbf666c1af916ed74795493c564df6fad462cc80 ]

On some customer setups it was observed that shmem contains a non-zero fip MAC for 57711 which would lead to enabling of SW FCoE.
Add a software workaround to clear the bad fip mac address if no FCoE connections are supported.

---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index 403fa8d98aa3..7f07999b3561 100644
@@ -11679,8 +11679,10 @@ static void bnx2x_get_fcoe_info(struct bnx2x *bp)
 	 * If maximum allowed number of connections is zero -
 	 * disable the feature.
 	 */
-	if (!bp->cnic_eth_dev.max_fcoe_conn)
+	if (!bp->cnic_eth_dev.max_fcoe_conn) {
 		bp->flags |= NO_FCOE_FLAG;
+		eth_zero_addr(bp->fip_mac);
+	}
 }
 
 static void bnx2x_get_cnic_info(struct bnx2x *bp)

2.19.1

From: Arnd Bergmann <[email protected]>

[ Upstream commit 51367e423c6501a26e67d91a655d2bc892303462 ]

The get_mac_address() function is normally inline, but when it is not, we get a warning that this configuration is broken:

WARNING: vmlinux.o(.text+0x4aff00): Section mismatch in reference from the function w90p910_ether_setup() to the function .init.text:get_mac_address() The function w90p910_ether_setup() references
the function __init get_mac_address().
This is often because w90p910_ether_setup lacks a __init

Remove the __init to make it always do the right thing.

---
 drivers/net/ethernet/nuvoton/w90p910_ether.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index afa445842f3e..9064db78cf39 100644
@@ -918,7 +918,7 @@ static const struct net_device_ops w90p910_ether_netdev_ops = {
 	.ndo_change_mtu		= eth_change_mtu,
 };
 
-static void __init get_mac_address(struct net_device *dev)
+static void get_mac_address(struct net_device *dev)
 {
 	struct w90p910_ether *ether = netdev_priv(dev);
 	struct platform_device *pdev;

2.19.1

From: Yonglong Liu <[email protected]>

[ Upstream commit 4e1d4be681b2c26fd874adbf584bf034573ac45d ]

According to the hip06 Datasheet:
1. The offset of INGRESS_SW_VLAN_TAG_DISC should be 0x1A00+4*all_chn_num
2. The offset of INGRESS_IN_DATA_STP_DISC should be 0x1A50+4*all_chn_num

---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index b674414a4d72..6174e58f6c31 100644
@@ -1891,9 +1891,9 @@ void hns_dsaf_update_stats(struct dsaf_device *dsaf_dev, u32 node_num)
 		DSAF_INODE_LOCAL_ADDR_FALSE_NUM_0_REG + 0x80 * (u64)node_num);
 
 	hw_stats->vlan_drop += dsaf_read_dev(dsaf_dev,
-		DSAF_INODE_SW_VLAN_TAG_DISC_0_REG + 0x80 * (u64)node_num);
+		DSAF_INODE_SW_VLAN_TAG_DISC_0_REG + 4 * (u64)node_num);
 	hw_stats->stp_drop += dsaf_read_dev(dsaf_dev,
-		DSAF_INODE_IN_DATA_STP_DISC_0_REG + 0x80 * (u64)node_num);
+		DSAF_INODE_IN_DATA_STP_DISC_0_REG + 4 * (u64)node_num);
 
 	hw_stats->tx_pkts += dsaf_read_dev(dsaf_dev,
 		DSAF_XOD_RCVPKT_CNT_0_REG + 0x90 * (u64)node_num);

2.19.1

From: Yonglong Liu <[email protected]>

[ Upstream commit 5778b13b64eca5549d242686f2f91a2c80c8fa40 ]

After resetting dsaf to try to repair chip error such as ecc error, the net device will be open if net interface is up. But at this time if there is the users set the net device up with the command ifconfig, the net device will be opened twice consecutively.

Function napi_enable was called when open device. And Kernel panic will be occurred if it was called twice consecutively. Such as follow:
static inline void napi_enable(struct napi_struct *n)

{
         BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state));
         smp_mb__before_clear_bit();
         clear_bit(NAPI_STATE_SCHED, &n->state);
}

[37255.571996] Kernel panic - not syncing: BUG!
[37255.595234] Call trace:
[37255.597694] [<ffff80000008ab48>] dump_backtrace+0x0/0x1a0
[37255.603114] [<ffff80000008ad08>] show_stack+0x20/0x28
[37255.608187] [<ffff8000009c4944>] dump_stack+0x98/0xb8
[37255.613258] [<ffff8000009c149c>] panic+0x10c/0x26c
[37255.618070] [<ffff80000070f134>] hns_nic_net_up+0x30c/0x4e0
[37255.623664] [<ffff80000070f39c>] hns_nic_net_open+0x94/0x12c
[37255.629346] [<ffff80000084be78>] __dev_open+0xf4/0x168
[37255.634504] [<ffff80000084c1ac>] __dev_change_flags+0x98/0x15c
[37255.640359] [<ffff80000084c29c>] dev_change_flags+0x2c/0x68
[37255.769580] [<ffff8000008dc400>] devinet_ioctl+0x650/0x704
[37255.775086] [<ffff8000008ddc38>] inet_ioctl+0x98/0xb4
[37255.780159] [<ffff800000827b7c>] sock_do_ioctl+0x44/0x84
[37255.785490] [<ffff800000828e04>] sock_ioctl+0x248/0x30c
[37255.790737] [<ffff80000026dc6c>] do_vfs_ioctl+0x480/0x618
[37255.796156] [<ffff80000026de94>] SyS_ioctl+0x90/0xa4
[37255.801139] SMP: stopping secondary CPUs
[37255.805079] kbox: catch panic event.
[37255.809586] collected_len = 128928, LOG_BUF_LEN_LOCAL = 131072
[37255.816103] flush cache 0xffff80003f000000  size 0x800000
[37255.822192] flush cache 0xffff80003f000000  size 0x800000
[37255.828289] flush cache 0xffff80003f000000  size 0x800000
[37255.834378] kbox: no notify die func register. no need to notify
[37255.840413] ---[ end Kernel panic - not syncing: BUG!

This patchset fix this bug according to the flag NIC_STATE_DOWN.

---
 drivers/net/ethernet/hisilicon/hns/hns_enet.c | 3 +++
 1 file changed, 3 insertions(+)

index 2fa54b0b0679..52d9b9947f47 100644
@@ -898,6 +898,9 @@ static int hns_nic_net_up(struct net_device *ndev)
 	int i, j, k;
 	int ret;
 
+	if (!test_bit(NIC_STATE_DOWN, &priv->state))
+		return 0;
+
 	ret = hns_nic_init_irq(priv);
 	if (ret != 0) {
 		netdev_err(ndev, "hns init irq failed! ret=%d\n", ret);

2.19.1

From: Yonglong Liu <[email protected]>

[ Upstream commit a57275d35576fdd89d8c771eedf1e7cf97e0dfa6 ]

There will be a large number of MAC pause frames on the net, which caused tx timeout of net device. And then the net device was reset to try to recover it. So that is not useful, and will cause some other problems.

So need doubled ndev->watchdog_timeo if device watchdog occurred until watchdog_timeo up to 40s and then try resetting to recover it.

When collecting dfx information such as hardware registers when tx timeout. Some registers for count were cleared when read. So need move this task before update net state which also read the count registers.

---
 drivers/net/ethernet/hisilicon/hns/hns_enet.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

index 52d9b9947f47..ff68727cbe55 100644
@@ -1051,11 +1051,19 @@ static int hns_nic_net_stop(struct net_device *ndev)
 }
 
 static void hns_tx_timeout_reset(struct hns_nic_priv *priv);
+#define HNS_TX_TIMEO_LIMIT (40 * HZ)
 static void hns_nic_net_timeout(struct net_device *ndev)
 {
 	struct hns_nic_priv *priv = netdev_priv(ndev);
 
-	hns_tx_timeout_reset(priv);
+	if (ndev->watchdog_timeo < HNS_TX_TIMEO_LIMIT) {
+		ndev->watchdog_timeo *= 2;
+		netdev_info(ndev, "watchdog_timo changed to %d.\n",
+			    ndev->watchdog_timeo);
+	} else {
+		ndev->watchdog_timeo = HNS_NIC_TX_TIMEOUT;
+		hns_tx_timeout_reset(priv);
+	}
 }
 
 static int hns_nic_do_ioctl(struct net_device *netdev, struct ifreq *ifr,

@@ -1345,11 +1353,11 @@ static void hns_nic_service_task(struct work_struct *work)
 		= container_of(work, struct hns_nic_priv, service_task);
 	struct hnae_handle *h = priv->ae_handle;
 
+	hns_nic_reset_subtask(priv);
 	hns_nic_update_link_status(priv->netdev);
 	h->dev->ops->update_led_status(h);
 	hns_nic_update_stats(priv->netdev);
 
-	hns_nic_reset_subtask(priv);
 	hns_nic_service_event_complete(priv);
 }
 

2.19.1

From: Yonglong Liu <[email protected]>

[ Upstream commit 726ae5c9e5f0c18eca8ea5296b526242c3e89822 ]

In some case, when mac enable|disable and adjust link, may cause hard to link(or abnormal) between mac and phy. This patch adds the code for rx PCS to avoid this bug.

Disable the rx PCS when driver disable the gmac, and enable the rx PCS when driver enable the mac.

---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c | 14 ++++++++++----
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h  |  1 +
 2 files changed, 11 insertions(+), 4 deletions(-)

index b8517b00e706..2a03f833e14d 100644
@@ -67,11 +67,14 @@ static void hns_gmac_enable(void *mac_drv, enum mac_commom_mode mode)
 	struct mac_driver *drv = (struct mac_driver *)mac_drv;
 
 	/*enable GE rX/tX */
-	if ((mode == MAC_COMM_MODE_TX) || (mode == MAC_COMM_MODE_RX_AND_TX))
+	if (mode == MAC_COMM_MODE_TX || mode == MAC_COMM_MODE_RX_AND_TX)
 		dsaf_set_dev_bit(drv, GMAC_PORT_EN_REG, GMAC_PORT_TX_EN_B, 1);
 
-	if ((mode == MAC_COMM_MODE_RX) || (mode == MAC_COMM_MODE_RX_AND_TX))
+	if (mode == MAC_COMM_MODE_RX || mode == MAC_COMM_MODE_RX_AND_TX) {
+		/* enable rx pcs */
+		dsaf_set_dev_bit(drv, GMAC_PCS_RX_EN_REG, 0, 0);
 		dsaf_set_dev_bit(drv, GMAC_PORT_EN_REG, GMAC_PORT_RX_EN_B, 1);
+	}
 }
 
 static void hns_gmac_disable(void *mac_drv, enum mac_commom_mode mode)

@@ -79,11 +82,14 @@ static void hns_gmac_disable(void *mac_drv, enum mac_commom_mode mode)
 	struct mac_driver *drv = (struct mac_driver *)mac_drv;
 
 	/*disable GE rX/tX */
-	if ((mode == MAC_COMM_MODE_TX) || (mode == MAC_COMM_MODE_RX_AND_TX))
+	if (mode == MAC_COMM_MODE_TX || mode == MAC_COMM_MODE_RX_AND_TX)
 		dsaf_set_dev_bit(drv, GMAC_PORT_EN_REG, GMAC_PORT_TX_EN_B, 0);
 
-	if ((mode == MAC_COMM_MODE_RX) || (mode == MAC_COMM_MODE_RX_AND_TX))
+	if (mode == MAC_COMM_MODE_RX || mode == MAC_COMM_MODE_RX_AND_TX) {
+		/* disable rx pcs */
+		dsaf_set_dev_bit(drv, GMAC_PCS_RX_EN_REG, 0, 1);
 		dsaf_set_dev_bit(drv, GMAC_PORT_EN_REG, GMAC_PORT_RX_EN_B, 0);
+	}
 }
 
 /**

index 9ff2881f933d..259786e0c3be 100644
@@ -506,6 +506,7 @@
 #define GMAC_LD_LINK_COUNTER_REG		0x01D0UL
 #define GMAC_LOOP_REG				0x01DCUL
 #define GMAC_RECV_CONTROL_REG			0x01E0UL
+#define GMAC_PCS_RX_EN_REG			0x01E4UL
 #define GMAC_VLAN_CODE_REG			0x01E8UL
 #define GMAC_RX_OVERRUN_CNT_REG			0x01ECUL
 #define GMAC_RX_LENGTHFIELD_ERR_CNT_REG		0x01F4UL

2.19.1

From: Trond Myklebust <[email protected]>

[ Upstream commit cf76785d30712d90185455e752337acdb53d2a5d ]

Ensure that we clear XPRT_CONNECTING before releasing the XPRT_LOCK so that we don't have races between the (asynchronous) socket setup code and tasks in xprt_connect().

---
 net/sunrpc/xprtsock.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index c9c0976d3bbb..5047c20f4306 100644
@@ -2200,8 +2200,8 @@ static void xs_udp_setup_socket(struct work_struct *work)
 	trace_rpc_socket_connect(xprt, sock, 0);
 	status = 0;
 out:
-	xprt_unlock_connect(xprt, transport);
 	xprt_clear_connecting(xprt);
+	xprt_unlock_connect(xprt, transport);
 	xprt_wake_pending_tasks(xprt, status);
 }
 

@@ -2374,8 +2374,8 @@ static void xs_tcp_setup_socket(struct work_struct *work)
 	}
 	status = -EAGAIN;
 out:
-	xprt_unlock_connect(xprt, transport);
 	xprt_clear_connecting(xprt);
+	xprt_unlock_connect(xprt, transport);
 	xprt_wake_pending_tasks(xprt, status);
 }
 

2.19.1

From: Colin Ian King <[email protected]>

[ Upstream commit 32043fa065b51e0b1433e48d118821c71b5cd65d ]

Currently the copy_to_user of data in the gentry struct is copying uninitiaized data in field _pad from the stack to userspace.

Fix this by explicitly memset'ing gentry to zero, this also will zero any compiler added padding fields that may be in struct (currently there are none).

Detected by CoverityScan, CID#200783 ("Uninitialized scalar variable")

---
 arch/x86/kernel/cpu/mtrr/if.c | 2 ++
 1 file changed, 2 insertions(+)

index d76f13d6d8d6..ec894bf5eeb0 100644
@@ -173,6 +173,8 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg)
 	struct mtrr_gentry gentry;
 	void __user *arg = (void __user *) __arg;
 
+	memset(&gentry, 0, sizeof(gentry));
+
 	switch (cmd) {
 	case MTRRIOC_ADD_ENTRY:
 	case MTRRIOC_SET_ENTRY:

2.19.1

From: Jason Martinsen <[email protected]>

[ Upstream commit 15515aaaa69659c502003926a2067ee76176148a ]

Current state for the lan78xx driver does not allow for changing the MAC address of the interface, without either removing the module (if you compiled it that way) or rebooting the machine. If you attempt to change the MAC address, ifconfig will show the new address, however, the system/interface will not respond to any traffic using that configuration. A few short-term options to work around this are to unload the module and reload it with the new MAC address, change the interface to "promisc", or reboot with the correct configuration to change the MAC.

This patch enables the ability to change the MAC address via fairly normal means... ifdown <interface>
modify entry in /etc/network/interfaces OR a similar method
ifup <interface>
Then test via any network communication, such as ICMP requests to gateway.

My only test platform for this patch has been a raspberry pi model 3b+.

-----

---
 drivers/net/usb/lan78xx.c | 4 ++++
 1 file changed, 4 insertions(+)

index 45a6a7cae4bf..59a7fa3420a6 100644
@@ -1679,6 +1679,10 @@ int lan78xx_set_mac_addr(struct net_device *netdev, void *p)
 	ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
 	ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
 
+	/* Added to support MAC address changes */
+	ret = lan78xx_write_reg(dev, MAF_LO(0), addr_lo);
+	ret = lan78xx_write_reg(dev, MAF_HI(0), addr_hi | MAF_HI_VALID_);
+
 	return 0;
 }
 

2.19.1

From: Juergen Gross <[email protected]>

[ Upstream commit d81c5054a5d1d4999c7cdead7636b6cd4af83d36 ]

At least old Xen net backends seem to send frags with no real data sometimes. In case such a fragment happens to occur with the frag limit already reached the frontend will BUG currently even if this situation is easily recoverable.

Modify the BUG_ON() condition accordingly.

---
 drivers/net/xen-netfront.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 0a4bd73caae5..6f55ab4f7959 100644
@@ -889,7 +889,7 @@ static RING_IDX xennet_fill_frags(struct netfront_queue *queue,
 		if (skb_shinfo(skb)->nr_frags == MAX_SKB_FRAGS) {
 			unsigned int pull_to = NETFRONT_SKB_CB(skb)->pull_to;
 
-			BUG_ON(pull_to <= skb_headlen(skb));
+			BUG_ON(pull_to < skb_headlen(skb));
 			__pskb_pull_tail(skb, pull_to - skb_headlen(skb));
 		}
 		if (unlikely(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS)) {

2.19.1

From: Colin Ian King <[email protected]>

[ Upstream commit f7db2beb4c2c6cc8111f5ab90fc7363ca91107b6 ]

Currently variable data0 is not being initialized so a garbage value is being passed to vxge_hw_vpath_fw_api and this value is being written to the rts_access_steer_data0 register. There are other occurrances where data0 is being initialized to zero (e.g. in function vxge_hw_upgrade_read_version) so I think it makes sense to ensure data0 is initialized likewise to 0.

Detected by CoverityScan, CID#140696 ("Uninitialized scalar variable")

---
 drivers/net/ethernet/neterion/vxge/vxge-config.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 6223930a8155..6f57b0b7d57a 100644
@@ -808,7 +808,7 @@ __vxge_hw_vpath_fw_ver_get(struct __vxge_hw_virtualpath *vpath,
 	struct vxge_hw_device_date *fw_date = &hw_info->fw_date;
 	struct vxge_hw_device_version *flash_version = &hw_info->flash_version;
 	struct vxge_hw_device_date *flash_date = &hw_info->flash_date;
-	u64 data0, data1 = 0, steer_ctrl = 0;
+	u64 data0 = 0, data1 = 0, steer_ctrl = 0;
 	enum vxge_hw_status status;
 
 	status = vxge_hw_vpath_fw_api(vpath,

2.19.1

From: Kangjie Lu <[email protected]>

[ Upstream commit d134e486e831defd26130770181f01dfc6195f7d ]

When netxen_rom_fast_read() fails, "bios" is left uninitialized and may contain random value, thus should not be used.

The fix ensures that if netxen_rom_fast_read() fails, we return "-EIO".

---
 drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index 7b43a3b4abdc..5cf551914767 100644
@@ -1125,7 +1125,8 @@ netxen_validate_firmware(struct netxen_adapter *adapter)
 		return -EINVAL;
 	}
 	val = nx_get_bios_version(adapter);
-	netxen_rom_fast_read(adapter, NX_BIOS_VERSION_OFFSET, (int *)&bios);
+	if (netxen_rom_fast_read(adapter, NX_BIOS_VERSION_OFFSET, (int *)&bios))
+		return -EIO;
 	if ((__force u32)val != bios) {
 		dev_err(&pdev->dev, "%s: firmware bios is incompatible\n",
 				fw_name[fw_type]);

2.19.1

From: Yangtao Li <[email protected]>

[ Upstream commit d430aff8cd0c57502d873909c184e3b5753f8b88 ]

The function of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller.

su_get_type() doesn't do that. The match node are used as an identifier to compare against the current node, so we can directly drop the refcount after getting the node from the path as it is not used as pointer.

Fix this by use a single variable and drop the refcount right after of_find_node_by_path().

---
 drivers/tty/serial/sunsu.c | 31 ++++++++++++++++++++++++++-----
 1 file changed, 26 insertions(+), 5 deletions(-)

index e124d2e88996..d6c9d5b458a0 100644
@@ -1393,22 +1393,43 @@ static inline struct console *SUNSU_CONSOLE(void)
 static enum su_type su_get_type(struct device_node *dp)
 {
 	struct device_node *ap = of_find_node_by_path("/aliases");
+	enum su_type rc = SU_PORT_PORT;
 
 	if (ap) {
 		const char *keyb = of_get_property(ap, "keyboard", NULL);
 		const char *ms = of_get_property(ap, "mouse", NULL);
+		struct device_node *match;
 
 		if (keyb) {
-			if (dp == of_find_node_by_path(keyb))
-				return SU_PORT_KBD;
+			match = of_find_node_by_path(keyb);
+
+			/*
+			 * The pointer is used as an identifier not
+			 * as a pointer, we can drop the refcount on
+			 * the of__node immediately after getting it.
+			 */
+			of_node_put(match);
+
+			if (dp == match) {
+				rc = SU_PORT_KBD;
+				goto out;
+			}
 		}
 		if (ms) {
-			if (dp == of_find_node_by_path(ms))
-				return SU_PORT_MS;
+			match = of_find_node_by_path(ms);
+
+			of_node_put(match);
+
+			if (dp == match) {
+				rc = SU_PORT_MS;
+				goto out;
+			}
 		}
 	}
 
-	return SU_PORT_PORT;
+out:
+	of_node_put(ap);
+	return rc;
 }
 
 static int su_probe(struct platform_device *op)

2.19.1