powerpc: Fix COFF zImage booting on old powermacs

From: Paul Mackerras <[email protected]>

[ Upstream commit 5564597d51c8ff5b88d95c76255e18b13b760879 ]

Commit 6975a783d7b4 ("powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN", 2011-04-12) changed the procedure descriptor at the start of crt0.S to have a hard-coded start address of 0x500000 rather than a reference to _zimage_start, presumably because having a reference to a symbol introduced a relocation which is awkward to handle in a position-independent executable. Unfortunately, what is at 0x500000 in the COFF image is not the first instruction, but the procedure descriptor itself, that is, a word containing 0x500000, which is not a valid instruction. Hence, booting a COFF zImage results in a "DEFAULT CATCH!, code=FFF00700" message from Open Firmware.

This fixes the problem by (a) putting the procedure descriptor in the data section and (b) adding a branch to _zimage_start as the first instruction in the program.

---
 arch/powerpc/boot/crt0.S | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index 8539ac93b0de..dbb06588b594 100644
@@ -15,7 +15,7 @@
 RELA = 7
 RELACOUNT = 0x6ffffff9
 
-	.text
+	.data
 	/* A procedure descriptor used when booting this as a COFF file.
 	 * When making COFF, this comes first in the link and we're
 	 * linked at 0x500000.

@@ -23,6 +23,8 @@ RELACOUNT = 0x6ffffff9
 	.globl	_zimage_start_opd
 _zimage_start_opd:
 	.long	0x500000, 0, 0, 0
+	.text
+	b	_zimage_start
 
 #ifdef __powerpc64__
 .balign 8

2.19.1

From: Qian Cai <[email protected]>

[ Upstream commit f1733a1d3cd32a9492f4cf866be37bb46e10163d ]

There is actually a space after "sp," like this,

    ffff2000080813c8:       a9bb7bfd        stp     x29, x30, [sp, #-80]!

Right now, checkstack.pl isn't able to print anything on aarch64, because it won't be able to match the stating objdump line of a function due to this missing space. Hence, it displays every stack as zero-size.

After this patch, checkpatch.pl is able to match the start of a function's objdump, and is then able to calculate each function's stack correctly.

---
 scripts/checkstack.pl | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index dd8397894d5c..12a6940741fe 100755
@@ -46,8 +46,8 @@ my (@stack, $re, $dre, $x, $xs, $funcre);
 	$xs	= "[0-9a-f ]";	# hex character or space
 	$funcre = qr/^$x* <(.*)>:$/;
 	if ($arch eq 'aarch64') {
-		#ffffffc0006325cc:       a9bb7bfd        stp     x29, x30, [sp,#-80]!
-		$re = qr/^.*stp.*sp,\#-([0-9]{1,8})\]\!/o;
+		#ffffffc0006325cc:       a9bb7bfd        stp     x29, x30, [sp, #-80]!
+		$re = qr/^.*stp.*sp, \#-([0-9]{1,8})\]\!/o;
 	} elsif ($arch eq 'arm') {
 		#c0008ffc:	e24dd064	sub	sp, sp, #100	; 0x64
 		$re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;

2.19.1

From: Benjamin Poirier <[email protected]>

[ Upstream commit ca92e173ab34a4f7fc4128bd372bd96f1af6f507 ]

sadhcnt is reported by ip -s xfrm state count as "buckets count", not the hash mask.

---
 net/xfrm/xfrm_state.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 1dbffea4da34..3ac1565e4d4c 100644
@@ -623,7 +623,7 @@ void xfrm_sad_getinfo(struct net *net, struct xfrmk_sadinfo *si)
 {
 	spin_lock_bh(&net->xfrm.xfrm_state_lock);
 	si->sadcnt = net->xfrm.state_num;
-	si->sadhcnt = net->xfrm.state_hmask;
+	si->sadhcnt = net->xfrm.state_hmask + 1;
 	si->sadhmcnt = xfrm_state_hashmax;
 	spin_unlock_bh(&net->xfrm.xfrm_state_lock);
 }

2.19.1

From: Tony Lindgren <[email protected]>

[ Upstream commit e2ca26ec4f01486661b55b03597c13e2b9c18b73 ]

With PM enabled, I noticed that pressing a key on the droid4 keyboard will block deeper idle states for the SoC. Let's fix this by using IRQF_ONESHOT and stop constantly toggling the device OMAP4_KBD_IRQENABLE register as suggested by Dmitry Torokhov <[email protected]>.

for OMAP4_KBD_IRQENABLE and OMAP4_KBD_WAKEUPENABLE together to avoid blocking deeper SoC idle states. And with toggling of OMAP4_KBD_IRQENABLE register now gone with IRQF_ONESHOT, also the SoC idle state problem is gone during runtime. We still also need to clear OMAP4_KBD_WAKEUPENABLE in omap4_keypad_close() though to pair it with omap4_keypad_open() to prevent blocking deeper SoC idle states after rmmod omap4-keypad.

---
 drivers/input/keyboard/omap4-keypad.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

index 1739221aa5fa..75ea1e3e0e91 100644
@@ -126,12 +126,8 @@ static irqreturn_t omap4_keypad_irq_handler(int irq, void *dev_id)
 {
 	struct omap4_keypad *keypad_data = dev_id;
 
-	if (kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)) {
-		/* Disable interrupts */
-		kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
-				 OMAP4_VAL_IRQDISABLE);
+	if (kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS))
 		return IRQ_WAKE_THREAD;
-	}
 
 	return IRQ_NONE;
 }

@@ -173,11 +169,6 @@ static irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id)
 	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
 			 kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
 
-	/* enable interrupts */
-	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
-		OMAP4_DEF_IRQENABLE_EVENTEN |
-				OMAP4_DEF_IRQENABLE_LONGKEY);
-
 	return IRQ_HANDLED;
 }
 

@@ -214,9 +205,10 @@ static void omap4_keypad_close(struct input_dev *input)
 
 	disable_irq(keypad_data->irq);
 
-	/* Disable interrupts */
+	/* Disable interrupts and wake-up events */
 	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
 			 OMAP4_VAL_IRQDISABLE);
+	kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, 0);
 
 	/* clear pending interrupts */
 	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,

@@ -364,7 +356,7 @@ static int omap4_keypad_probe(struct platform_device *pdev)
 	}
 
 	error = request_threaded_irq(keypad_data->irq, omap4_keypad_irq_handler,
-				     omap4_keypad_irq_thread_fn, 0,
+				     omap4_keypad_irq_thread_fn, IRQF_ONESHOT,
 				     "omap4-keypad", keypad_data);
 	if (error) {
 		dev_err(&pdev->dev, "failed to register interrupt\n");

2.19.1

From: Hui Peng <[email protected]>

[ Upstream commit 5146f95df782b0ac61abde36567e718692725c89 ]

The function hso_probe reads if_num from the USB device (as an u8) and uses it without a length check to index an array, resulting in an OOB memory read in hso_probe or hso_get_config_data.

Add a length check for both locations and updated hso_probe to bail on error.

This issue has been assigned CVE-2018-19985.

---
 drivers/net/usb/hso.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

index babda7d8693e..f040bf558430 100644
@@ -2814,6 +2814,12 @@ static int hso_get_config_data(struct usb_interface *interface)
 		return -EIO;
 	}
 
+	/* check if we have a valid interface */
+	if (if_num > 16) {
+		kfree(config_data);
+		return -EINVAL;
+	}
+
 	switch (config_data[if_num]) {
 	case 0x0:
 		result = 0;

@@ -2884,10 +2890,18 @@ static int hso_probe(struct usb_interface *interface,
 
 	/* Get the interface/port specification from either driver_info or from
 	 * the device itself */
-	if (id->driver_info)
+	if (id->driver_info) {
+		/* if_num is controlled by the device, driver_info is a 0 terminated
+		 * array. Make sure, the access is in bounds! */
+		for (i = 0; i <= if_num; ++i)
+			if (((u32 *)(id->driver_info))[i] == 0)
+				goto exit;
 		port_spec = ((u32 *)(id->driver_info))[if_num];
-	else
+	} else {
 		port_spec = hso_get_config_data(interface);
+		if (port_spec < 0)
+			goto exit;
+	}
 
 	/* Check if we need to switch to alt interfaces prior to port
 	 * configuration */

2.19.1

From: Sudarsana Reddy Kalluru <[email protected]>

[ Upstream commit bbf666c1af916ed74795493c564df6fad462cc80 ]

On some customer setups it was observed that shmem contains a non-zero fip MAC for 57711 which would lead to enabling of SW FCoE.
Add a software workaround to clear the bad fip mac address if no FCoE connections are supported.

---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index 8063e928827c..b121882c6d1b 100644
@@ -11462,8 +11462,10 @@ static void bnx2x_get_fcoe_info(struct bnx2x *bp)
 	 * If maximum allowed number of connections is zero -
 	 * disable the feature.
 	 */
-	if (!bp->cnic_eth_dev.max_fcoe_conn)
+	if (!bp->cnic_eth_dev.max_fcoe_conn) {
 		bp->flags |= NO_FCOE_FLAG;
+		eth_zero_addr(bp->fip_mac);
+	}
 }
 
 static void bnx2x_get_cnic_info(struct bnx2x *bp)

2.19.1

From: Arnd Bergmann <[email protected]>

[ Upstream commit 51367e423c6501a26e67d91a655d2bc892303462 ]

The get_mac_address() function is normally inline, but when it is not, we get a warning that this configuration is broken:

WARNING: vmlinux.o(.text+0x4aff00): Section mismatch in reference from the function w90p910_ether_setup() to the function .init.text:get_mac_address() The function w90p910_ether_setup() references
the function __init get_mac_address().
This is often because w90p910_ether_setup lacks a __init

Remove the __init to make it always do the right thing.

---
 drivers/net/ethernet/nuvoton/w90p910_ether.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 379b7fbded78..f15c97343c9b 100644
@@ -918,7 +918,7 @@ static const struct net_device_ops w90p910_ether_netdev_ops = {
 	.ndo_change_mtu		= eth_change_mtu,
 };
 
-static void __init get_mac_address(struct net_device *dev)
+static void get_mac_address(struct net_device *dev)
 {
 	struct w90p910_ether *ether = netdev_priv(dev);
 	struct platform_device *pdev;

2.19.1

From: Colin Ian King <[email protected]>

[ Upstream commit 32043fa065b51e0b1433e48d118821c71b5cd65d ]

Currently the copy_to_user of data in the gentry struct is copying uninitiaized data in field _pad from the stack to userspace.

Fix this by explicitly memset'ing gentry to zero, this also will zero any compiler added padding fields that may be in struct (currently there are none).

Detected by CoverityScan, CID#200783 ("Uninitialized scalar variable")

---
 arch/x86/kernel/cpu/mtrr/if.c | 2 ++
 1 file changed, 2 insertions(+)

index a041e094b8b9..5598de02d2b4 100644
@@ -173,6 +173,8 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg)
 	struct mtrr_gentry gentry;
 	void __user *arg = (void __user *) __arg;
 
+	memset(&gentry, 0, sizeof(gentry));
+
 	switch (cmd) {
 	case MTRRIOC_ADD_ENTRY:
 	case MTRRIOC_SET_ENTRY:

2.19.1

From: Juergen Gross <[email protected]>

[ Upstream commit d81c5054a5d1d4999c7cdead7636b6cd4af83d36 ]

At least old Xen net backends seem to send frags with no real data sometimes. In case such a fragment happens to occur with the frag limit already reached the frontend will BUG currently even if this situation is easily recoverable.

Modify the BUG_ON() condition accordingly.

---
 drivers/net/xen-netfront.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 3bbfb09af65f..5d11e60d4995 100644
@@ -913,7 +913,7 @@ static RING_IDX xennet_fill_frags(struct netfront_queue *queue,
 		if (skb_shinfo(skb)->nr_frags == MAX_SKB_FRAGS) {
 			unsigned int pull_to = NETFRONT_SKB_CB(skb)->pull_to;
 
-			BUG_ON(pull_to <= skb_headlen(skb));
+			BUG_ON(pull_to < skb_headlen(skb));
 			__pskb_pull_tail(skb, pull_to - skb_headlen(skb));
 		}
 		BUG_ON(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS);

2.19.1

From: Colin Ian King <[email protected]>

[ Upstream commit f7db2beb4c2c6cc8111f5ab90fc7363ca91107b6 ]

Currently variable data0 is not being initialized so a garbage value is being passed to vxge_hw_vpath_fw_api and this value is being written to the rts_access_steer_data0 register. There are other occurrances where data0 is being initialized to zero (e.g. in function vxge_hw_upgrade_read_version) so I think it makes sense to ensure data0 is initialized likewise to 0.

Detected by CoverityScan, CID#140696 ("Uninitialized scalar variable")

---
 drivers/net/ethernet/neterion/vxge/vxge-config.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 2bbd01fcb9b0..4332ebbd7162 100644
@@ -808,7 +808,7 @@ __vxge_hw_vpath_fw_ver_get(struct __vxge_hw_virtualpath *vpath,
 	struct vxge_hw_device_date *fw_date = &hw_info->fw_date;
 	struct vxge_hw_device_version *flash_version = &hw_info->flash_version;
 	struct vxge_hw_device_date *flash_date = &hw_info->flash_date;
-	u64 data0, data1 = 0, steer_ctrl = 0;
+	u64 data0 = 0, data1 = 0, steer_ctrl = 0;
 	enum vxge_hw_status status;
 
 	status = vxge_hw_vpath_fw_api(vpath,

2.19.1

From: Kangjie Lu <[email protected]>

[ Upstream commit d134e486e831defd26130770181f01dfc6195f7d ]

When netxen_rom_fast_read() fails, "bios" is left uninitialized and may contain random value, thus should not be used.

The fix ensures that if netxen_rom_fast_read() fails, we return "-EIO".

---
 drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index 5c4068353f66..746612a88515 100644
@@ -1125,7 +1125,8 @@ netxen_validate_firmware(struct netxen_adapter *adapter)
 		return -EINVAL;
 	}
 	val = nx_get_bios_version(adapter);
-	netxen_rom_fast_read(adapter, NX_BIOS_VERSION_OFFSET, (int *)&bios);
+	if (netxen_rom_fast_read(adapter, NX_BIOS_VERSION_OFFSET, (int *)&bios))
+		return -EIO;
 	if ((__force u32)val != bios) {
 		dev_err(&pdev->dev, "%s: firmware bios is incompatible\n",
 				fw_name[fw_type]);

2.19.1

From: Yangtao Li <[email protected]>

[ Upstream commit d430aff8cd0c57502d873909c184e3b5753f8b88 ]

The function of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller.

su_get_type() doesn't do that. The match node are used as an identifier to compare against the current node, so we can directly drop the refcount after getting the node from the path as it is not used as pointer.

Fix this by use a single variable and drop the refcount right after of_find_node_by_path().

---
 drivers/tty/serial/sunsu.c | 31 ++++++++++++++++++++++++++-----
 1 file changed, 26 insertions(+), 5 deletions(-)

index 5326ae195e5f..298c11556850 100644
@@ -1380,22 +1380,43 @@ static inline struct console *SUNSU_CONSOLE(void)
 static enum su_type su_get_type(struct device_node *dp)
 {
 	struct device_node *ap = of_find_node_by_path("/aliases");
+	enum su_type rc = SU_PORT_PORT;
 
 	if (ap) {
 		const char *keyb = of_get_property(ap, "keyboard", NULL);
 		const char *ms = of_get_property(ap, "mouse", NULL);
+		struct device_node *match;
 
 		if (keyb) {
-			if (dp == of_find_node_by_path(keyb))
-				return SU_PORT_KBD;
+			match = of_find_node_by_path(keyb);
+
+			/*
+			 * The pointer is used as an identifier not
+			 * as a pointer, we can drop the refcount on
+			 * the of__node immediately after getting it.
+			 */
+			of_node_put(match);
+
+			if (dp == match) {
+				rc = SU_PORT_KBD;
+				goto out;
+			}
 		}
 		if (ms) {
-			if (dp == of_find_node_by_path(ms))
-				return SU_PORT_MS;
+			match = of_find_node_by_path(ms);
+
+			of_node_put(match);
+
+			if (dp == match) {
+				rc = SU_PORT_MS;
+				goto out;
+			}
 		}
 	}
 
-	return SU_PORT_PORT;
+out:
+	of_node_put(ap);
+	return rc;
 }
 
 static int su_probe(struct platform_device *op)

2.19.1