Skip to contentSkip to conversation

Add quirk for reading BD_ADDR from fwnode property

PATCH Superseded Matthias Kaehlcke 1 participant 5 messages Dec 28, 2018 – Jan 18, 2019

Subsystems (6)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v3 cover Add quirk for reading BD_ADDR from fwnode property

On some systems the Bluetooth Device Address (BD_ADDR) isn't stored on the Bluetooth chip itself. One way to configure the address is through the device tree (patched in by the bootloader). The btqcomsmd driver is an example, it can read the address from the DT property 'local-bd-address'.

To avoid redundant open-coded reading of 'local-bd-address' and error handling this series adds the quirk HCI_QUIRK_USE_BDADDR_PROPERTY to retrieve the BD address of a device from the DT and adapts the btqcomsmd and hci_qca drivers to use this quirk.

Matthias Kaehlcke (3):
Bluetooth: Add quirk for reading BD_ADDR from fwnode property
Bluetooth: btqcomsmd: use HCI_QUIRK_USE_BDADDR_PROPERTY
Bluetooth: hci_qca: Set HCI_QUIRK_USE_BDADDR_PROPERTY for wcn3990

 drivers/bluetooth/btqcomsmd.c | 29 +++--------------------
 drivers/bluetooth/hci_qca.c   |  1 +
 include/net/bluetooth/hci.h   | 12 ++++++++++
 net/bluetooth/hci_core.c      | 43 +++++++++++++++++++++++++++++++++++
 net/bluetooth/mgmt.c          |  6 +++--
 5 files changed, 63 insertions(+), 28 deletions(-)
Signature · 1 line
2.20.1.415.g653613c723-goog
#1 lore raw

PATCH v3 1/3 Bluetooth: Add quirk for reading BD_ADDR from fwnode property

Add HCI_QUIRK_USE_BDADDR_PROPERTY to allow controllers to retrieve the public Bluetooth address from the firmware node property 'local-bd-address'. If quirk is set and the property does not exist or is invalid the controller is marked as unconfigured.

---
Changes in v3:
- return no value from hci_dev_get_bd_addr_from_property() since currently nobody uses it anyway
- use bacpy() in hci_dev_get_bd_addr_from_property()
- return -EADDRNOTAVAIL if no BD_ADDR is configured or if the driver has no ->set_bdaddr

Changes in v2:
- added check for return value of ->setup()
- only read BD_ADDR from the property if it isn't assigned yet. This is needed to support configuration from user space
- refactored the branch of the new quirk to get rid of 'bd_addr_set'
- added 'Reviewed-by: Balakrishna Godavarthi <[email protected]>' tag

---
 include/net/bluetooth/hci.h | 12 +++++++++++
 net/bluetooth/hci_core.c    | 43 +++++++++++++++++++++++++++++++++++++
 net/bluetooth/mgmt.c        |  6 ++++--
 3 files changed, 59 insertions(+), 2 deletions(-)
include/net/bluetooth/hci.h +12 -0
index c36dc1e20556a..fbba43e9bef5b 100644
@@ -158,6 +158,18 @@ enum {
 	 */
 	HCI_QUIRK_INVALID_BDADDR,
 
+	/* When this quirk is set, the public Bluetooth address
+	 * initially reported by HCI Read BD Address command
+	 * is considered invalid. The public BD Address can be
+	 * specified in the fwnode property 'local-bd-address'.
+	 * If this property does not exist or is invalid controller
+	 * configuration is required before this device can be used.
+	 *
+	 * This quirk can be set before hci_register_dev is called or
+	 * during the hdev->setup vendor callback.
+	 */
+	HCI_QUIRK_USE_BDADDR_PROPERTY,
+
 	/* When this quirk is set, the duplicate filtering during
 	 * scanning is based on Bluetooth devices addresses. To allow
 	 * RSSI based updates, restart scanning if needed.
net/bluetooth/hci_core.c +43 -0

61 lines not on this page · raw message

net/bluetooth/mgmt.c +4 -2
index ccce954f81468..fae84353d030f 100644
@@ -551,7 +551,8 @@ static bool is_configured(struct hci_dev *hdev)
 	    !hci_dev_test_flag(hdev, HCI_EXT_CONFIGURED))
 		return false;
 
-	if (test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) &&
+	if ((test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) ||
+	     test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) &&
 	    !bacmp(&hdev->public_addr, BDADDR_ANY))
 		return false;
 
@@ -566,7 +567,8 @@ static __le32 get_missing_options(struct hci_dev *hdev)
 	    !hci_dev_test_flag(hdev, HCI_EXT_CONFIGURED))
 		options |= MGMT_OPTION_EXTERNAL_CONFIG;
 
-	if (test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) &&
+	if ((test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) ||
+	     test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) &&
 	    !bacmp(&hdev->public_addr, BDADDR_ANY))
 		options |= MGMT_OPTION_PUBLIC_ADDRESS;
 
Signature · 1 line
2.20.1.415.g653613c723-goog
#2 lore raw

Re: [PATCH v3 1/3] Bluetooth: Add quirk for reading BD_ADDR from fwnode property

Quoted 134 lines · Matthias Kaehlcke

Add HCI_QUIRK_USE_BDADDR_PROPERTY to allow controllers to retrieve the public Bluetooth address from the firmware node property 'local-bd-address'. If quirk is set and the property does not exist or is invalid the controller is marked as unconfigured.

---
Changes in v3:
- return no value from hci_dev_get_bd_addr_from_property() since currently nobody uses it anyway
- use bacpy() in hci_dev_get_bd_addr_from_property()
- return -EADDRNOTAVAIL if no BD_ADDR is configured or if the driver has no ->set_bdaddr

Changes in v2:
- added check for return value of ->setup()
- only read BD_ADDR from the property if it isn't assigned yet. This is needed to support configuration from user space
- refactored the branch of the new quirk to get rid of 'bd_addr_set'
- added 'Reviewed-by: Balakrishna Godavarthi <[email protected]>' tag

---
 include/net/bluetooth/hci.h | 12 +++++++++++
 net/bluetooth/hci_core.c    | 43 +++++++++++++++++++++++++++++++++++++
 net/bluetooth/mgmt.c        |  6 ++++--
 3 files changed, 59 insertions(+), 2 deletions(-)
include/net/bluetooth/hci.h +12 -0
index c36dc1e20556a..fbba43e9bef5b 100644
@@ -158,6 +158,18 @@ enum {
 	 */
 	HCI_QUIRK_INVALID_BDADDR,
 
+	/* When this quirk is set, the public Bluetooth address
+	 * initially reported by HCI Read BD Address command
+	 * is considered invalid. The public BD Address can be
+	 * specified in the fwnode property 'local-bd-address'.
+	 * If this property does not exist or is invalid controller
+	 * configuration is required before this device can be used.
+	 *
+	 * This quirk can be set before hci_register_dev is called or
+	 * during the hdev->setup vendor callback.
+	 */
+	HCI_QUIRK_USE_BDADDR_PROPERTY,
+
 	/* When this quirk is set, the duplicate filtering during
 	 * scanning is based on Bluetooth devices addresses. To allow
 	 * RSSI based updates, restart scanning if needed.
net/bluetooth/hci_core.c +43 -0
index 7352fe85674be..3ccfa351b87bb 100644
@@ -30,6 +30,7 @@
 #include <linux/rfkill.h>
 #include <linux/debugfs.h>
 #include <linux/crypto.h>
+#include <linux/property.h>
 #include <asm/unaligned.h>
 
 #include <net/bluetooth/bluetooth.h>
@@ -1355,6 +1356,32 @@ int hci_inquiry(void __user *arg)
 	return err;
 }
 
+/**
+ * hci_dev_get_bd_addr_from_property - Get the Bluetooth Device Address
+ *				       (BD_ADDR) for a HCI device from
+ *				       a firmware node property.
+ * @hdev:	The HCI device
+ *
+ * Search the firmware node for 'local-bd-address'.
+ *
+ * All-zero BD addresses are rejected, because those could be properties
+ * that exist in the firmware tables, but were not updated by the firmware. For
+ * example, the DTS could define 'local-bd-address', with zero BD addresses.
+ */
+static void hci_dev_get_bd_addr_from_property(struct hci_dev *hdev)
+{
+	struct fwnode_handle *fwnode = dev_fwnode(hdev->dev.parent);
+	bdaddr_t ba;
+	int ret;
+
+	ret = fwnode_property_read_u8_array(fwnode, "local-bd-address",
+					    (u8 *)&ba, sizeof(ba));
+	if (ret < 0 || !bacmp(&ba, BDADDR_ANY))
+		return;
+
+	bacpy(&hdev->public_addr, &ba);
+}
+
 static int hci_dev_do_open(struct hci_dev *hdev)
 {
 	int ret = 0;
@@ -1422,6 +1449,22 @@ static int hci_dev_do_open(struct hci_dev *hdev)
 		if (hdev->setup)
 			ret = hdev->setup(hdev);
 
+		if (ret)
+			goto setup_failed;
+
+		if (test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) {
+			if (!bacmp(&hdev->public_addr, BDADDR_ANY))
+				hci_dev_get_bd_addr_from_property(hdev);
+
+			if (bacmp(&hdev->public_addr, BDADDR_ANY) &&
+			    hdev->set_bdaddr)
+				ret = hdev->set_bdaddr(hdev,
+						       &hdev->public_addr);
+			else
+				ret = -EADDRNOTAVAIL;
+		}
+
+setup_failed:
 		/* The transport driver can set these quirks before
 		 * creating the HCI device or in its setup callback.
 		 *
net/bluetooth/mgmt.c +2 -1
index ccce954f81468..fae84353d030f 100644
@@ -551,7 +551,8 @@ static bool is_configured(struct hci_dev *hdev)
 	    !hci_dev_test_flag(hdev, HCI_EXT_CONFIGURED))
 		return false;
 
-	if (test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) &&
+	if ((test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) ||
+	     test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) &&
 	    !bacmp(&hdev->public_addr, BDADDR_ANY))
 		return false;
 

net/bluetooth/mgmt.c static __le32 get_missing_options(struct hci_dev *hdev) · line 574

Quoted 9 lines
net/bluetooth/mgmt.c +2 -1
@@ -566,7 +567,8 @@ static __le32 get_missing_options(struct hci_dev *hdev)
 	    !hci_dev_test_flag(hdev, HCI_EXT_CONFIGURED))
 		options |= MGMT_OPTION_EXTERNAL_CONFIG;
 
-	if (test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) &&
+	if ((test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) ||
+	     test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) &&
 	    !bacmp(&hdev->public_addr, BDADDR_ANY))
 		options |= MGMT_OPTION_PUBLIC_ADDRESS;
 

Marcel (et al), do you have any more comments on this series or is it ready to land?

Thanks

Matthias

#3 lore raw

PATCH v3 2/3 Bluetooth: btqcomsmd: use HCI_QUIRK_USE_BDADDR_PROPERTY

In reply to Matthias Kaehlcke

Use the HCI_QUIRK_USE_BDADDR_PROPERTY quirk to let the HCI core handle the reading of 'local-bd-address'. With this there is no need to set HCI_QUIRK_INVALID_BDADDR, the case of a non-existing or invalid fwnode property is handled by the core code.

---
Changes in v3:
- none

Changes in v2:
- removed now unused field 'bdaddr' from struct btqcomsmd
- added 'Reviewed-by: Balakrishna Godavarthi <[email protected]>' tag

---
 drivers/bluetooth/btqcomsmd.c | 29 +++--------------------------
 1 file changed, 3 insertions(+), 26 deletions(-)
drivers/bluetooth/btqcomsmd.c +3 -26
index 7df3eed1ef5e9..b3020fab6c8e3 100644
@@ -28,7 +28,6 @@
 struct btqcomsmd {
 	struct hci_dev *hdev;
 
-	bdaddr_t bdaddr;
 	struct rpmsg_endpoint *acl_channel;
 	struct rpmsg_endpoint *cmd_channel;
 };
@@ -125,23 +124,10 @@ static int btqcomsmd_setup(struct hci_dev *hdev)
 		return PTR_ERR(skb);
 	kfree_skb(skb);
 
-	/* Devices do not have persistent storage for BD address. If no
-	 * BD address has been retrieved during probe, mark the device
-	 * as having an invalid BD address.
+	/* Devices do not have persistent storage for BD address. Retrieve
+	 * it from the firmware node property.
 	 */
-	if (!bacmp(&btq->bdaddr, BDADDR_ANY)) {
-		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
-		return 0;
-	}
-
-	/* When setting a configured BD address fails, mark the device
-	 * as having an invalid BD address.
-	 */
-	err = qca_set_bdaddr_rome(hdev, &btq->bdaddr);
-	if (err) {
-		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
-		return 0;
-	}
+	set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
 
 	return 0;
 }
@@ -169,15 +155,6 @@ static int btqcomsmd_probe(struct platform_device *pdev)
 	if (IS_ERR(btq->cmd_channel))
 		return PTR_ERR(btq->cmd_channel);
 
-	/* The local-bd-address property is usually injected by the
-	 * bootloader which has access to the allocated BD address.
-	 */
-	if (!of_property_read_u8_array(pdev->dev.of_node, "local-bd-address",
-				       (u8 *)&btq->bdaddr, sizeof(bdaddr_t))) {
-		dev_info(&pdev->dev, "BD address %pMR retrieved from device-tree",
-			 &btq->bdaddr);
-	}
-
 	hdev = hci_alloc_dev();
 	if (!hdev)
 		return -ENOMEM;
Signature · 1 line
2.20.1.415.g653613c723-goog
#4 lore raw

PATCH v3 3/3 Bluetooth: hci_qca: Set HCI_QUIRK_USE_BDADDR_PROPERTY for wcn3990

In reply to Matthias Kaehlcke

Set quirk for wcn3990 to read BD_ADDR from a firmware node property.

---
Changes in v3:
- none

Changes in v2:
- patch added to the series

tested with https://lore.kernel.org/patchwork/patch/1003830
("Bluetooth: hci_qca: Add helper to set device address.")

---
 drivers/bluetooth/hci_qca.c | 1 +
 1 file changed, 1 insertion(+)
drivers/bluetooth/hci_qca.c +1 -0
index f036c8f98ea33..0535833caa52c 100644
@@ -1193,6 +1193,7 @@ static int qca_setup(struct hci_uart *hu)
 		 * setup for every hci up.
 		 */
 		set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
+		set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
 		hu->hdev->shutdown = qca_power_off;
 		ret = qca_wcn3990_init(hu);
 		if (ret)
Signature · 1 line
2.20.1.415.g653613c723-goog