Skip to contentSkip to conversation

dd NPCM7xx ADC patch to dev-4.19

PATCH Superseded Tomer Maimon 1 participant 5 messages Dec 31, 2018

Subsystems (4)

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Tomer Maimon

author maintainer
#0 lore raw

cover dd NPCM7xx ADC patch to dev-4.19

Add NPCM7xx ADC patch to dev-4.19.

please add the NPCM7xx ADC patch set after adding
the following patch set:
https://patchwork.ozlabs.org/cover/1014101/

Tomer Maimon (4):
dt-binding: iio: add NPCM ADC documentation
iio: adc: add NPCM ADC driver
dts: npcm7xx: Modify NPCM7xx device tree
arm: configs: add NPCM7xx ADC and MMIO configuration

 .../bindings/iio/adc/nuvoton,npcm-adc.txt          |  35 +++
 arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi      | 182 +++++++----
 arch/arm/boot/dts/nuvoton-npcm750-evb.dts          | 157 +++++++---
 arch/arm/boot/dts/nuvoton-npcm750-gpio.dtsi        |   4 +-
 arch/arm/boot/dts/nuvoton-npcm750.dtsi             |   1 +
 arch/arm/configs/npcm7xx_defconfig                 |   5 +
 drivers/iio/adc/Kconfig                            |  10 +
 drivers/iio/adc/Makefile                           |   1 +
 drivers/iio/adc/npcm_adc.c                         | 336 +++++++++++++++++++++
 9 files changed, 627 insertions(+), 104 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt
 create mode 100644 drivers/iio/adc/npcm_adc.c
Signature · 1 line
2.14.1
author maintainer
#1 lore raw

PATCH 1/4 dt-binding: iio: add NPCM ADC documentation

Added device tree binding documentation for Nuvoton BMC NPCM Analog-to-Digital Converter(ADC).

---
 .../bindings/iio/adc/nuvoton,npcm-adc.txt          | 35 ++++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt
Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt new file +35 -0
new file mode 100644
index 000000000000..6f0843d837cc
@@ -0,0 +1,35 @@
+Nuvoton NPCM Analog to Digital Converter (ADC)
+
+The NPCM ADC is a 10-bit converter for eight channel inputs.
+
+Required properties:
+- compatible	: "nuvoton,npcm750-adc" for the NPCM7XX BMC.
+- reg			: specifies physical base address and size of the registers.
+- interrupts	: Contain the ADC interrupt with flags for falling edge.
+
+Optional properties:
+- clocks		: phandle of ADC reference clock, in case the clock is not
+				  added the ADC will use the default ADC sample rate.
+- vref-supply	: The regulator supply ADC reference voltage, in case the
+				  vref-supply is not added the ADC will use internal voltage
+				  reference.
+
+Required Node in the NPCM7xx BMC:
+An additional register is present in the NPCM7xx SOC which is
+assumed to be in the same device tree, with and marked as
+compatible with "nuvoton,npcm750-rst".
+
+Example:
+
+adc: adc@f000c000 {
+	compatible = "nuvoton,npcm750-adc";
+	reg = <0xf000c000 0x8>;
+	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clk NPCM7XX_CLK_ADC>;
+};
+
+rst: rst@f0801000 {
+	compatible = "nuvoton,npcm750-rst", "syscon",
+	"simple-mfd";
+	reg = <0xf0801000 0x6C>;
+};
Signature · 1 line
2.14.1
author maintainer
#2 lore raw

PATCH 2/4 iio: adc: add NPCM ADC driver

In reply to Tomer Maimon

Add Nuvoton NPCM BMC Analog-to-Digital Converter(ADC) driver.

The NPCM ADC is a 10-bit converter for eight channel inputs.

---
 drivers/iio/adc/Kconfig    |  10 ++
 drivers/iio/adc/Makefile   |   1 +
 drivers/iio/adc/npcm_adc.c | 336 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 347 insertions(+)
 create mode 100644 drivers/iio/adc/npcm_adc.c
drivers/iio/adc/Kconfig +10 -0
index 4a754921fb6f..c261e12bdc01 100644
@@ -545,6 +545,16 @@ config NAU7802
 	  To compile this driver as a module, choose M here: the
 	  module will be called nau7802.
 
+config NPCM_ADC
+	tristate "Nuvoton NPCM ADC driver"
+	depends on ARCH_NPCM || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Say yes here to build support for Nuvoton NPCM ADC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called npcm_adc.
+
 config PALMAS_GPADC
 	tristate "TI Palmas General Purpose ADC"
 	depends on MFD_PALMAS
drivers/iio/adc/Makefile +1 -0
index 03db7b578f9c..68c7aa898c62 100644
@@ -52,6 +52,7 @@ obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
 obj-$(CONFIG_MESON_SARADC) += meson_saradc.o
 obj-$(CONFIG_MXS_LRADC_ADC) += mxs-lradc-adc.o
 obj-$(CONFIG_NAU7802) += nau7802.o
+obj-$(CONFIG_NPCM_ADC) += npcm_adc.o
 obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o
 obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
 obj-$(CONFIG_QCOM_VADC_COMMON) += qcom-vadc-common.o
drivers/iio/adc/npcm_adc.c new file +336 -0

336 lines not on this page · raw message

Signature · 1 line
2.14.1
author maintainer
#3 lore raw

PATCH 3/4 dts: npcm7xx: Modify NPCM7xx device tree

In reply to Tomer Maimon

Modify NPCM7xx device tree FIU, ADC, RST, VCD and SPI nodes Add regulator and HGPIO pins nodes.

---
 arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 182 +++++++++++++++++---------
 arch/arm/boot/dts/nuvoton-npcm750-evb.dts     | 157 ++++++++++++++++------
 arch/arm/boot/dts/nuvoton-npcm750-gpio.dtsi   |   4 +-
 arch/arm/boot/dts/nuvoton-npcm750.dtsi        |   1 +
 4 files changed, 240 insertions(+), 104 deletions(-)
arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi +117 -65
index afe0d3cb516d..73ec9649204b 100644
@@ -5,6 +5,7 @@
 #include "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	#address-cells = <1>;
@@ -74,7 +75,7 @@
 		rst: rst@f0801000 {
 			compatible = "nuvoton,npcm750-rst", "syscon",
 			"simple-mfd";
-			reg = <0x801000 0x1000>;
+			reg = <0x801000 0x6C>;
 		};
 
 		scu: scu@3fe000 {
@@ -144,6 +145,7 @@
 			pinctrl-0 = <&r1_pins
 			             &r1err_pins
 				     &r1md_pins>;
+			status = "disabled";
 		};
 
 		ehci1:usb@f0806000 {
@@ -213,39 +215,39 @@
 			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		spi0: spi@fb000000 {
-			compatible = "nuvoton,npcm750-spi";
+		fiu0: fiu@fb000000 {
+			compatible = "nuvoton,npcm750-fiu";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xfb000000 0x1000>, <0x80000000 0x10000000>;
 			reg-names = "control", "memory";
-			chip-max-address-map = <0x8000000>;
 			clocks = <&clk NPCM7XX_CLK_AHB>;
 			clock-names = "clk_ahb";
-			spi-nor@0 {
-					compatible = "jedec,spi-nor";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					reg = <0>;
-			};
+			status = "disabled";
 		};
-		spi3: spi@c0000000 {
-			compatible = "nuvoton,npcm750-spi";
+
+		fiu3: fiu@c0000000 {
+			compatible = "nuvoton,npcm750-fiu";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xc0000000 0x1000>, <0xA0000000 0x20000000>;
 			reg-names = "control", "memory";
-			chip-max-address-map = <0x8000000>;
 			clocks = <&clk NPCM7XX_CLK_AHB>;
 			clock-names = "clk_ahb";
 			pinctrl-names = "default";
-			pinctrl-0 = <&spi3_pins &spi3quad_pins>;
-			spi-nor@0 {
-					compatible = "jedec,spi-nor";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					reg = <0>;
-			};
+			pinctrl-0 = <&spi3_pins>;
+			status = "disabled";
+		};
+
+		fiux: fiu@fb001000 {
+			compatible = "nuvoton,npcm750-fiu";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfb001000 0x1000>, <0xf8000000 0x2000000>;
+			reg-names = "control", "memory";
+			clocks = <&clk NPCM7XX_CLK_AHB>;
+			clock-names = "clk_ahb";
+			status = "disabled";
 		};
 
 		pci_rc: axi-pcie@e1000000 {
@@ -271,17 +273,18 @@
 		vcd: vcd@f0810000 {
 			compatible = "nuvoton,npcm750-vcd";
 			reg = <0xf0810000 0x10000>;
-			phy-memory = <0x3e200000 0x600000>;
-			de-mode = /bits/ 8 <1>;
-			interrupts = <0 22 4>;
+			mem-addr = <0x3e200000>;
+			mem-size = <0x600000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
 		ece: ece@f0820000 {
 			compatible = "nuvoton,npcm750-ece";
 			reg = <0xf0820000 0x2000>;
-			phy-memory = <0x3e800000 0x600000>;
-			interrupts = <0 24 4>;
+			mem-addr = <0x3e800000>;
+			mem-size = <0x600000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
@@ -352,13 +355,30 @@
 				};
 			};
 
-			pspi: pspi@0 {
+			spi0: spi@200000 {
+				compatible = "nuvoton,npcm750-pspi";
+				reg = <0x200000 0x1000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pspi1_pins>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk NPCM7XX_CLK_APB5>;
+				clock-names = "clk_apb5";
+				status = "disabled";
+			};
+
+			spi1: spi@201000 {
 				compatible = "nuvoton,npcm750-pspi";
-				reg = <0x200000 0x2000>;
-				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-						<GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x201000 0x1000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pspi2_pins>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk NPCM7XX_CLK_APB5>;
 				clock-names = "clk_apb5";
+				status = "disabled";
 			};
 
 			timer0: timer@8000 {
@@ -438,10 +458,10 @@
 
 			adc: adc@c000 {
 				compatible = "nuvoton,npcm750-adc";
-				reg = <0xc000 0x1000>;
+				reg = <0xc000 0x8>;
+				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk NPCM7XX_CLK_ADC>;
-				clock-names = "clk_adc";
-				vref = <2048>;
+				status = "disabled";
 			};
 
 			otp:otp@189000 {
@@ -453,7 +473,7 @@
 				clock-names = "clk_apb4";
 			};
 
-			pwm_fan:pwm-fan-controller@103000 {	
+			pwm_fan:pwm-fan-controller@103000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "nuvoton,npcm750-pwm-fan";
@@ -487,9 +507,9 @@
 				status = "disabled";
 			};
 
-			i2c0: i2c-bus@80000 {
+			i2c0: i2c@80000 {
 				reg = <0x80000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c-bus";
+				compatible = "nuvoton,npcm750-i2c";
 				clocks = <&clk NPCM7XX_CLK_APB2>;
 				bus-frequency = <100000>;
 				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
@@ -498,9 +518,9 @@
 				status = "disabled";
 			};
 
-			i2c1: i2c-bus@81000 {
+			i2c1: i2c@81000 {
 				reg = <0x81000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c-bus";
+				compatible = "nuvoton,npcm750-i2c";
 				clocks = <&clk NPCM7XX_CLK_APB2>;
 				bus-frequency = <100000>;
 				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
@@ -509,9 +529,9 @@
 				status = "disabled";
 			};
 
-			i2c2: i2c-bus@82000 {
+			i2c2: i2c@82000 {
 				reg = <0x82000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c-bus";
+				compatible = "nuvoton,npcm750-i2c";
 				clocks = <&clk NPCM7XX_CLK_APB2>;
 				bus-frequency = <100000>;
 				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
@@ -520,9 +540,9 @@
 				status = "disabled";
 			};
 
-			i2c3: i2c-bus@83000 {
+			i2c3: i2c@83000 {
 				reg = <0x83000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c-bus";
+				compatible = "nuvoton,npcm750-i2c";
 				clocks = <&clk NPCM7XX_CLK_APB2>;
 				bus-frequency = <100000>;
 				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
@@ -531,9 +551,9 @@
 				status = "disabled";
 			};
 
-			i2c4: i2c-bus@84000 {
+			i2c4: i2c@84000 {
 				reg = <0x84000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c-bus";
+				compatible = "nuvoton,npcm750-i2c";
 				clocks = <&clk NPCM7XX_CLK_APB2>;
 				bus-frequency = <100000>;
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
@@ -542,9 +562,9 @@
 				status = "disabled";
 			};
 
-			i2c5: i2c-bus@85000 {
+			i2c5: i2c@85000 {
 				reg = <0x85000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c-bus";
+				compatible = "nuvoton,npcm750-i2c";
 				clocks = <&clk NPCM7XX_CLK_APB2>;
 				bus-frequency = <100000>;
 				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
@@ -553,9 +573,9 @@
 				status = "disabled";
 			};
 
-			i2c6: i2c-bus@86000 {
+			i2c6: i2c@86000 {
 				reg = <0x86000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c-bus";
+				compatible = "nuvoton,npcm750-i2c";
 				clocks = <&clk NPCM7XX_CLK_APB2>;
 				bus-frequency = <100000>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
@@ -564,9 +584,9 @@
 				status = "disabled";
 			};
 
-			i2c7: i2c-bus@87000 {
+			i2c7: i2c@87000 {
 				reg = <0x87000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c-bus";
+				compatible = "nuvoton,npcm750-i2c";
 				clocks = <&clk NPCM7XX_CLK_APB2>;
 				bus-frequency = <100000>;
 				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
@@ -575,9 +595,9 @@
 				status = "disabled";
 			};
 
-			i2c8: i2c-bus@88000 {
+			i2c8: i2c@88000 {
 				reg = <0x88000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c-bus";
+				compatible = "nuvoton,npcm750-i2c";
 				clocks = <&clk NPCM7XX_CLK_APB2>;
 				bus-frequency = <100000>;
 				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
@@ -586,9 +606,9 @@
 				status = "disabled";
 			};
 
-			i2c9: i2c-bus@89000 {
+			i2c9: i2c@89000 {
 				reg = <0x89000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c-bus";
+				compatible = "nuvoton,npcm750-i2c";
 				clocks = <&clk NPCM7XX_CLK_APB2>;
 				bus-frequency = <100000>;
 				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -597,9 +617,9 @@
 				status = "disabled";
 			};
 
-			i2c10: i2c-bus@8a000 {
+			i2c10: i2c@8a000 {
 				reg = <0x8a000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c-bus";
+				compatible = "nuvoton,npcm750-i2c";
 				clocks = <&clk NPCM7XX_CLK_APB2>;
 				bus-frequency = <100000>;
 				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -608,9 +628,9 @@
 				status = "disabled";
 			};
 
-			i2c11: i2c-bus@8b000 {
+			i2c11: i2c@8b000 {
 				reg = <0x8b000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c-bus";
+				compatible = "nuvoton,npcm750-i2c";
 				clocks = <&clk NPCM7XX_CLK_APB2>;
 				bus-frequency = <100000>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -619,9 +639,9 @@
 				status = "disabled";
 			};
 
-			i2c12: i2c-bus@8c000 {
+			i2c12: i2c@8c000 {
 				reg = <0x8c000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c-bus";
+				compatible = "nuvoton,npcm750-i2c";
 				clocks = <&clk NPCM7XX_CLK_APB2>;
 				bus-frequency = <100000>;
 				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -630,9 +650,9 @@
 				status = "disabled";
 			};
 
-			i2c13: i2c-bus@8d000 {
+			i2c13: i2c@8d000 {
 				reg = <0x8d000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c-bus";
+				compatible = "nuvoton,npcm750-i2c";
 				clocks = <&clk NPCM7XX_CLK_APB2>;
 				bus-frequency = <100000>;
 				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -641,9 +661,9 @@
 				status = "disabled";
 			};
 
-			i2c14: i2c-bus@8e000 {
+			i2c14: i2c@8e000 {
 				reg = <0x8e000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c-bus";
+				compatible = "nuvoton,npcm750-i2c";
 				clocks = <&clk NPCM7XX_CLK_APB2>;
 				bus-frequency = <100000>;
 				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
@@ -652,9 +672,9 @@
 				status = "disabled";
 			};
 
-			i2c15: i2c-bus@8f000 {
+			i2c15: i2c@8f000 {
 				reg = <0x8f000 0x1000>;
-				compatible = "nuvoton,npcm750-i2c-bus";
+				compatible = "nuvoton,npcm750-i2c";
 				clocks = <&clk NPCM7XX_CLK_APB2>;
 				bus-frequency = <100000>;
 				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
@@ -1202,5 +1222,37 @@
 			groups = "clkreq";
 			function = "clkreq";
 		};
+		hgpio0_pins: hgpio0-pins {
+			groups = "hgpio0";
+			function = "hgpio0";
+		};
+		hgpio1_pins: hgpio1-pins {
+			groups = "hgpio1";
+			function = "hgpio1";
+		};
+		hgpio2_pins: hgpio2-pins {
+			groups = "hgpio2";
+			function = "hgpio2";
+		};
+		hgpio3_pins: hgpio3-pins {
+			groups = "hgpio3";
+			function = "hgpio3";
+		};
+		hgpio4_pins: hgpio4-pins {
+			groups = "hgpio4";
+			function = "hgpio4";
+		};
+		hgpio5_pins: hgpio5-pins {
+			groups = "hgpio5";
+			function = "hgpio5";
+		};
+		hgpio6_pins: hgpio6-pins {
+			groups = "hgpio6";
+			function = "hgpio6";
+		};
+		hgpio7_pins: hgpio7-pins {
+			groups = "hgpio7";
+			function = "hgpio7";
+		};
 	};
 };
arch/arm/boot/dts/nuvoton-npcm750-evb.dts +120 -37

291 lines not on this page · raw message

arch/arm/boot/dts/nuvoton-npcm750-gpio.dtsi +2 -2
index b9675fbce4e6..abe6a3402a59 100644
@@ -1107,10 +1107,10 @@
 			bias-disable;
 			input-enable;
 		};
-		gpio132o_pins: gpio132o-pins {
+		gpio132_pins: gpio132-pins {
 			pins = "GPIO132/SMB10SCL";
 			bias-disable;
-			output-high;
+			input-enable;
 		};
 		gpio133_pins: gpio133-pins {
 			pins = "GPIO133/SMB10SDA";
arch/arm/boot/dts/nuvoton-npcm750.dtsi +1 -0
index 421a4ed54bad..4ce748f14763 100644
@@ -73,6 +73,7 @@
 			pinctrl-0 = <&r2_pins
 			             &r2err_pins
 				     &r2md_pins>;
+			status = "disabled";
 		};
 
 		udc0:udc@f0830000 {
Signature · 1 line
2.14.1
author maintainer
#4 lore raw

PATCH 4/4 arm: configs: add NPCM7xx ADC and MMIO configuration

In reply to Tomer Maimon

Add ADC and MMIO configuration to NPCM7xx (Poleg) BMC.

---
 arch/arm/configs/npcm7xx_defconfig | 5 +++++
 1 file changed, 5 insertions(+)
arch/arm/configs/npcm7xx_defconfig +5 -0
index f3cefe303a21..15d345a8c99b 100644
@@ -67,6 +67,8 @@ CONFIG_SENSORS_LM75=y
 CONFIG_SENSORS_NPCM7XX=y
 CONFIG_SENSORS_TMP102=y
 CONFIG_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
@@ -81,6 +83,9 @@ CONFIG_USB_MASS_STORAGE=m
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_IIO=y
+CONFIG_NPCM_ADC=y
+CONFIG_IIO_MUX=y
+CONFIG_MUX_MMIO=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
Signature · 1 line
2.14.1