Skip to contentSkip to conversation

conf/ucm: bytcht-es8316 support

RFC Applied Hans de Goede 2 participants 5 messages Jan 3, 2019 – Jan 7, 2019

lore
Share & tools
lore
#0 lore raw

cover conf/ucm: bytcht-es8316 support

Hi All,

Here is the UCM profile to match the kernel patches which I just submitted upstream. Note this series is RFC for now, since it depends on the name of a few controls added by the kernel series, as well as on the long_name set by the kernel series.

Once the kernel series has been merged into -next, this UCM profile series can be merged as well. I will send another mail when the kernel series has been accepted.

Regards,

Hans

#1 lore raw

RFC 1/2 conf/ucm: Add UCM profile for bytcht-es8316 boards

Add an UCM profile for Bay Trail and Cherry Trail boards with an ES8316 codec.

Re-use the existing platform enable and disable sequences for BYT/CHT SST support and add a codecs/es8316 dir with codec specific enable / disable sequences for the various inputs and outputs.

---
 configure.ac                                  |  2 +
 src/conf/ucm/Makefile.am                      |  1 +
 src/conf/ucm/bytcht-es8316/HiFi.conf          | 26 ++++++++++++
 src/conf/ucm/bytcht-es8316/Makefile.am        |  4 ++
 src/conf/ucm/bytcht-es8316/bytcht-es8316.conf |  8 ++++
 src/conf/ucm/codecs/Makefile.am               |  1 +
 src/conf/ucm/codecs/es8316/EnableSeq.conf     | 19 +++++++++
 src/conf/ucm/codecs/es8316/HeadPhones.conf    | 24 +++++++++++
 .../ucm/codecs/es8316/IN1-HeadsetMic.conf     | 25 ++++++++++++
 .../ucm/codecs/es8316/IN1-InternalMic.conf    | 24 +++++++++++
 .../ucm/codecs/es8316/IN2-HeadsetMic.conf     | 25 ++++++++++++
 .../ucm/codecs/es8316/IN2-InternalMic.conf    | 24 +++++++++++
 src/conf/ucm/codecs/es8316/Makefile.am        |  7 ++++
 src/conf/ucm/codecs/es8316/MonoSpeaker.conf   | 40 +++++++++++++++++++
 src/conf/ucm/codecs/es8316/Speaker.conf       | 22 ++++++++++
 15 files changed, 252 insertions(+)
 create mode 100644 src/conf/ucm/bytcht-es8316/HiFi.conf
 create mode 100644 src/conf/ucm/bytcht-es8316/Makefile.am
 create mode 100644 src/conf/ucm/bytcht-es8316/bytcht-es8316.conf
 create mode 100644 src/conf/ucm/codecs/es8316/EnableSeq.conf
 create mode 100644 src/conf/ucm/codecs/es8316/HeadPhones.conf
 create mode 100644 src/conf/ucm/codecs/es8316/IN1-HeadsetMic.conf
 create mode 100644 src/conf/ucm/codecs/es8316/IN1-InternalMic.conf
 create mode 100644 src/conf/ucm/codecs/es8316/IN2-HeadsetMic.conf
 create mode 100644 src/conf/ucm/codecs/es8316/IN2-InternalMic.conf
 create mode 100644 src/conf/ucm/codecs/es8316/Makefile.am
 create mode 100644 src/conf/ucm/codecs/es8316/MonoSpeaker.conf
 create mode 100644 src/conf/ucm/codecs/es8316/Speaker.conf
configure.ac +2 -0
index a0392bfe..ff2e2799 100644
@@ -720,6 +720,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \
 	  src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/Makefile \
 	  src/conf/ucm/broadwell-rt286/Makefile \
 	  src/conf/ucm/broxton-rt298/Makefile \
+	  src/conf/ucm/bytcht-es8316/Makefile \
 	  src/conf/ucm/bytcr-rt5640/Makefile \
 	  src/conf/ucm/bytcr-rt5640-mono-spk-dmic1-mic/Makefile \
 	  src/conf/ucm/bytcr-rt5640-mono-spk-in1-mic/Makefile \
@@ -759,6 +760,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \
 	  src/conf/ucm/tegraalc5632/Makefile \
 	  src/conf/ucm/VEYRON-I2S/Makefile \
 	  src/conf/ucm/codecs/Makefile \
+	  src/conf/ucm/codecs/es8316/Makefile \
 	  src/conf/ucm/codecs/nau8824/Makefile \
 	  src/conf/ucm/codecs/rt5640/Makefile \
 	  src/conf/ucm/codecs/rt5651/Makefile \
src/conf/ucm/Makefile.am +1 -0
index c82637fa..b252f258 100644
@@ -4,6 +4,7 @@ platforms \
 ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN \
 broadwell-rt286 \
 broxton-rt298 \
+bytcht-es8316 \
 bytcr-rt5640 \
 bytcr-rt5640-mono-spk-dmic1-mic \
 bytcr-rt5640-mono-spk-in1-mic \
src/conf/ucm/bytcht-es8316/HiFi.conf new file +26 -0
new file mode 100644
index 00000000..7af3daaf
@@ -0,0 +1,26 @@
+SectionVerb {
+	EnableSequence [
+		cdev "hw:bytchtes8316"
+		<platforms/bytcr/PlatformEnableSeq.conf>
+		<codecs/es8316/EnableSeq.conf>
+	]
+
+	DisableSequence [
+		cdev "hw:bytchtes8316"
+		<platforms/bytcr/PlatformDisableSeq.conf>
+	]
+
+	Value {
+		PlaybackPCM "hw:bytchtes8316"
+		CapturePCM "hw:bytchtes8316"
+	}
+}
+
+<codecs/es8316/Speaker.conf>
+<codecs/es8316/MonoSpeaker.conf>
+<codecs/es8316/HeadPhones.conf>
+
+<codecs/es8316/IN1-InternalMic.conf>
+<codecs/es8316/IN2-InternalMic.conf>
+<codecs/es8316/IN1-HeadsetMic.conf>
+<codecs/es8316/IN2-HeadsetMic.conf>
src/conf/ucm/bytcht-es8316/Makefile.am new file +4 -0
new file mode 100644
index 00000000..bc8fa669
@@ -0,0 +1,4 @@
+alsaconfigdir = @ALSA_CONFIG_DIR@
+ucmdir = $(alsaconfigdir)/ucm/bytcht-es8316
+ucm_DATA = bytcht-es8316.conf HiFi.conf
+EXTRA_DIST = $(ucm_DATA)
src/conf/ucm/bytcht-es8316/bytcht-es8316.conf new file +8 -0
new file mode 100644
index 00000000..e77e2977
@@ -0,0 +1,8 @@
+SectionUseCase."HiFi" {
+	File "HiFi.conf"
+	Comment "Play HiFi quality Music"
+}
+
+SectionDefaults [
+	cdev "hw:bytchtes8316"
+]
src/conf/ucm/codecs/Makefile.am +1 -0
index 2b374acb..0ea5399d 100644
@@ -1,4 +1,5 @@
 SUBDIRS=\
+es8316 \
 rt5640 \
 rt5651 \
 nau8824
src/conf/ucm/codecs/es8316/EnableSeq.conf new file +19 -0
new file mode 100644
index 00000000..551b79b7
@@ -0,0 +1,19 @@
+# Disable all inputs / outputs
+cset "name='Speaker Switch' off"
+cset "name='Headphone Switch' off"
+cset "name='Headset Mic Switch' off"
+cset "name='Internal Mic Switch' off"
+
+# Set HP vol to 0 dB (3/3)
+cset "name='Headphone Playback Volume' 3"
+# Set HP mixer vol to -6 dB (4/7) louder does not work
+cset "name='Headphone Mixer Volume' 4"
+# Set DAC vol to 0 dB (192/192)
+cset "name='DAC Playback Volume' 192"
+# Set ADC vold to 0 dB (10/10)
+cset "name='ADC PGA Gain Volume' 10"
+
+# Setup muxes / switches
+cset "name='Left Headphone Mixer Left DAC Switch' on"
+cset "name='Right Headphone Mixer Right DAC Switch' on"	
+cset "name='ALC Capture Switch' on"
src/conf/ucm/codecs/es8316/HeadPhones.conf new file +24 -0
new file mode 100644
index 00000000..ff13ef1b
@@ -0,0 +1,24 @@
+SectionDevice."Headphones" {
+	Comment "Headphones"
+
+	ConflictingDevice [
+		"Speaker"
+		"MonoSpeaker"
+	]
+
+	EnableSequence [
+		cdev "hw:bytchtes8316"
+		cset "name='Headphone Switch' on"
+	]
+
+	DisableSequence [
+		cdev "hw:bytchtes8316"
+		cset "name='Headphone Switch' off"
+	]
+
+	Value {
+		PlaybackChannels "2"
+		JackControl "Headphone Jack"
+		JackHWMute "Speaker MonoSpeaker"
+	}
+}
src/conf/ucm/codecs/es8316/IN1-HeadsetMic.conf new file +25 -0
new file mode 100644
index 00000000..05016468
@@ -0,0 +1,25 @@
+SectionDevice."HeadsetMic-IN1" {
+	Comment "Headset Microphone on IN1"
+
+	ConflictingDevice [
+		"InternalMic-IN1"
+		"InternalMic-IN2"
+		"HeadsetMic-IN2"
+	]
+
+	EnableSequence [
+		cdev "hw:bytchtes8316"
+		cset "name='Differential Mux' lin1-rin1"
+		cset "name='Headset Mic Switch' on"
+	]
+
+	DisableSequence [
+		cdev "hw:bytchtes8316"
+		cset "name='Headset Mic Switch' off"
+	]
+
+	Value {
+		CaptureChannels "2"
+		JackControl "Headset Mic Jack"
+	}
+}
src/conf/ucm/codecs/es8316/IN1-InternalMic.conf new file +24 -0
new file mode 100644
index 00000000..5386fda7
@@ -0,0 +1,24 @@
+SectionDevice."InternalMic-IN1" {
+	Comment "Internal Microphone on IN1"
+
+	ConflictingDevice [
+		"InternalMic-IN2"
+		"HeadsetMic-IN1"
+		"HeadsetMic-IN2"
+	]
+
+	EnableSequence [
+		cdev "hw:bytchtes8316"
+		cset "name='Differential Mux' lin1-rin1"
+		cset "name='Internal Mic Switch' on"
+	]
+
+	DisableSequence [
+		cdev "hw:bytchtes8316"
+		cset "name='Internal Mic Switch' off"
+	]
+
+	Value {
+		CaptureChannels "2"
+	}
+}
src/conf/ucm/codecs/es8316/IN2-HeadsetMic.conf new file +25 -0
new file mode 100644
index 00000000..229e7e7b
@@ -0,0 +1,25 @@
+SectionDevice."HeadsetMic-IN2" {
+	Comment "Headset Microphone on IN2"
+
+	ConflictingDevice [
+		"InternalMic-IN1"
+		"InternalMic-IN2"
+		"HeadsetMic-IN1"
+	]
+
+	EnableSequence [
+		cdev "hw:bytchtes8316"
+		cset "name='Differential Mux' lin2-rin2"
+		cset "name='Headset Mic Switch' on"
+	]
+
+	DisableSequence [
+		cdev "hw:bytchtes8316"
+		cset "name='Headset Mic Switch' off"
+	]
+
+	Value {
+		CaptureChannels "2"
+		JackControl "Headset Mic Jack"
+	}
+}
src/conf/ucm/codecs/es8316/IN2-InternalMic.conf new file +24 -0
new file mode 100644
index 00000000..59892fdc
@@ -0,0 +1,24 @@
+SectionDevice."InternalMic-IN2" {
+	Comment "Internal Microphone on IN2"
+
+	ConflictingDevice [
+		"InternalMic-IN1"
+		"HeadsetMic-IN1"
+		"HeadsetMic-IN2"
+	]
+
+	EnableSequence [
+		cdev "hw:bytchtes8316"
+		cset "name='Differential Mux' lin2-rin2"
+		cset "name='Internal Mic Switch' on"
+	]
+
+	DisableSequence [
+		cdev "hw:bytchtes8316"
+		cset "name='Internal Mic Switch' off"
+	]
+
+	Value {
+		CaptureChannels "2"
+	}
+}
src/conf/ucm/codecs/es8316/Makefile.am new file +7 -0
new file mode 100644
index 00000000..36eeebce
@@ -0,0 +1,7 @@
+alsaconfigdir = @ALSA_CONFIG_DIR@
+ucmdir = $(alsaconfigdir)/ucm/codecs/es8316
+ucm_DATA = EnableSeq.conf HeadPhones.conf \
+	   IN1-InternalMic.conf IN2-InternalMic.conf \
+	   IN1-HeadsetMic.conf IN2-HeadsetMic.conf \
+	   Speaker.conf MonoSpeaker.conf
+EXTRA_DIST = $(ucm_DATA)
src/conf/ucm/codecs/es8316/MonoSpeaker.conf new file +40 -0
new file mode 100644
index 00000000..b1a95a5b
@@ -0,0 +1,40 @@
+SectionDevice."MonoSpeaker" {
+	Comment "Mono Speaker"
+
+	ConflictingDevice [
+		"Speaker"
+		"Headphones"
+	]
+
+	EnableSequence [
+		cdev "hw:bytchtes8316"
+
+		# BYT/CHT devices with an ES8316 codec use a single speaker
+		# connected between the headhpone LOUT and ROUT pins, expecting
+		# the output to be in a mono differential mode. Presumably this
+		# is done to use the power of both the left and right headphone
+		# amplifier channels to allow the speaker to be louder.
+		#
+		# The ES8316 codec does not have a differential output mode, but
+		# we can emulate one by making both channels output the exact
+		# same signal by setting the "DAC Mono Mix Switch", combined
+		# with setting the "Playback Polarity" control to "R Invert",
+		# which applies a 180 degrees phase inversion to the right chan.
+		cset "name='DAC Mono Mix Switch' on"
+		cset "name='Playback Polarity' 1"
+
+		cset "name='Speaker Switch' on"
+	]
+
+	DisableSequence [
+		cdev "hw:bytchtes8316"
+		cset "name='Speaker Switch' off"
+		# DAC settings back to normal for stereo headphones output
+		cset "name='Playback Polarity' 0"
+		cset "name='DAC Mono Mix Switch' off"
+	]
+
+	Value {
+		PlaybackChannels "2"
+	}
+}
src/conf/ucm/codecs/es8316/Speaker.conf new file +22 -0
new file mode 100644
index 00000000..f0894c74
@@ -0,0 +1,22 @@
+SectionDevice."Speaker" {
+	Comment "Speakers"
+
+	ConflictingDevice [
+		"MonoSpeaker"
+		"Headphones"
+	]
+
+	EnableSequence [
+		cdev "hw:bytchtes8316"
+		cset "name='Speaker Switch' on"
+	]
+
+	DisableSequence [
+		cdev "hw:bytchtes8316"
+		cset "name='Speaker Switch' off"
+	]
+
+	Value {
+		PlaybackChannels "2"
+	}
+}
Signature · 1 line
2.20.1
#2 lore raw

RFC 2/2 conf/ucm: bytcht-es8316: Add long-name UCM profiles

In reply to Hans de Goede

After recent kernel work, the kernel now sets a long-name for bytcht-es8316 boards which indicates if a single (mono) speaker or stereo speakers are used and if in1 or in2 is used for the internal mic (the headset mic will be on the other input).

This commit adds UCM profiles for bytcht-es8316 boards using these new long-names, based on the generic bytcht-es8316 profile.

---
 configure.ac                                  |  4 ++++
 src/conf/ucm/Makefile.am                      |  4 ++++
 .../bytcht-es8316-mono-spk-in1-mic/HiFi.conf  | 23 +++++++++++++++++++
 .../Makefile.am                               |  4 ++++
 .../bytcht-es8316-mono-spk-in1-mic.conf       |  8 +++++++
 .../bytcht-es8316-mono-spk-in2-mic/HiFi.conf  | 23 +++++++++++++++++++
 .../Makefile.am                               |  4 ++++
 .../bytcht-es8316-mono-spk-in2-mic.conf       |  8 +++++++
 .../HiFi.conf                                 | 23 +++++++++++++++++++
 .../Makefile.am                               |  4 ++++
 .../bytcht-es8316-stereo-spk-in1-mic.conf     |  8 +++++++
 .../HiFi.conf                                 | 23 +++++++++++++++++++
 .../Makefile.am                               |  4 ++++
 .../bytcht-es8316-stereo-spk-in2-mic.conf     |  8 +++++++
 14 files changed, 148 insertions(+)
 create mode 100644 src/conf/ucm/bytcht-es8316-mono-spk-in1-mic/HiFi.conf
 create mode 100644 src/conf/ucm/bytcht-es8316-mono-spk-in1-mic/Makefile.am
 create mode 100644 src/conf/ucm/bytcht-es8316-mono-spk-in1-mic/bytcht-es8316-mono-spk-in1-mic.conf
 create mode 100644 src/conf/ucm/bytcht-es8316-mono-spk-in2-mic/HiFi.conf
 create mode 100644 src/conf/ucm/bytcht-es8316-mono-spk-in2-mic/Makefile.am
 create mode 100644 src/conf/ucm/bytcht-es8316-mono-spk-in2-mic/bytcht-es8316-mono-spk-in2-mic.conf
 create mode 100644 src/conf/ucm/bytcht-es8316-stereo-spk-in1-mic/HiFi.conf
 create mode 100644 src/conf/ucm/bytcht-es8316-stereo-spk-in1-mic/Makefile.am
 create mode 100644 src/conf/ucm/bytcht-es8316-stereo-spk-in1-mic/bytcht-es8316-stereo-spk-in1-mic.conf
 create mode 100644 src/conf/ucm/bytcht-es8316-stereo-spk-in2-mic/HiFi.conf
 create mode 100644 src/conf/ucm/bytcht-es8316-stereo-spk-in2-mic/Makefile.am
 create mode 100644 src/conf/ucm/bytcht-es8316-stereo-spk-in2-mic/bytcht-es8316-stereo-spk-in2-mic.conf
configure.ac +4 -0
index ff2e2799..9b099b7f 100644
@@ -721,6 +721,10 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \
 	  src/conf/ucm/broadwell-rt286/Makefile \
 	  src/conf/ucm/broxton-rt298/Makefile \
 	  src/conf/ucm/bytcht-es8316/Makefile \
+	  src/conf/ucm/bytcht-es8316-mono-spk-in1-mic/Makefile \
+	  src/conf/ucm/bytcht-es8316-mono-spk-in2-mic/Makefile \
+	  src/conf/ucm/bytcht-es8316-stereo-spk-in1-mic/Makefile \
+	  src/conf/ucm/bytcht-es8316-stereo-spk-in2-mic/Makefile \
 	  src/conf/ucm/bytcr-rt5640/Makefile \
 	  src/conf/ucm/bytcr-rt5640-mono-spk-dmic1-mic/Makefile \
 	  src/conf/ucm/bytcr-rt5640-mono-spk-in1-mic/Makefile \
src/conf/ucm/Makefile.am +4 -0
index b252f258..ee850ee6 100644
@@ -5,6 +5,10 @@ ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN \
 broadwell-rt286 \
 broxton-rt298 \
 bytcht-es8316 \
+bytcht-es8316-mono-spk-in1-mic \
+bytcht-es8316-mono-spk-in2-mic \
+bytcht-es8316-stereo-spk-in1-mic \
+bytcht-es8316-stereo-spk-in2-mic \
 bytcr-rt5640 \
 bytcr-rt5640-mono-spk-dmic1-mic \
 bytcr-rt5640-mono-spk-in1-mic \
src/conf/ucm/bytcht-es8316-mono-spk-in1-mic/HiFi.conf new file +23 -0
new file mode 100644
index 00000000..97899495
@@ -0,0 +1,23 @@
+SectionVerb {
+	EnableSequence [
+		cdev "hw:bytchtes8316"
+		<platforms/bytcr/PlatformEnableSeq.conf>
+		<codecs/es8316/EnableSeq.conf>
+	]
+
+	DisableSequence [
+		cdev "hw:bytchtes8316"
+		<platforms/bytcr/PlatformDisableSeq.conf>
+	]
+
+	Value {
+		PlaybackPCM "hw:bytchtes8316"
+		CapturePCM "hw:bytchtes8316"
+	}
+}
+
+<codecs/es8316/MonoSpeaker.conf>
+<codecs/es8316/HeadPhones.conf>
+
+<codecs/es8316/IN1-InternalMic.conf>
+<codecs/es8316/IN2-HeadsetMic.conf>
src/conf/ucm/bytcht-es8316-mono-spk-in1-mic/Makefile.am new file +4 -0
new file mode 100644
index 00000000..420592fc
@@ -0,0 +1,4 @@
+alsaconfigdir = @ALSA_CONFIG_DIR@
+ucmdir = $(alsaconfigdir)/ucm/bytcht-es8316-mono-spk-in1-mic
+ucm_DATA = bytcht-es8316-mono-spk-in1-mic.conf HiFi.conf
+EXTRA_DIST = $(ucm_DATA)
src/conf/ucm/bytcht-es8316-mono-spk-in1-mic/bytcht-es8316-mono-spk-in1-mic.conf new file +8 -0
new file mode 100644
index 00000000..26d82ead
@@ -0,0 +1,8 @@
+SectionUseCase."HiFi" {
+	File "../bytcht-es8316-mono-spk-in1-mic/HiFi.conf"
+	Comment "Play HiFi quality Music"
+}
+
+SectionDefaults [
+	cdev "hw:bytchtes8316"
+]
src/conf/ucm/bytcht-es8316-mono-spk-in2-mic/HiFi.conf new file +23 -0
new file mode 100644
index 00000000..2821eb51
@@ -0,0 +1,23 @@
+SectionVerb {
+	EnableSequence [
+		cdev "hw:bytchtes8316"
+		<platforms/bytcr/PlatformEnableSeq.conf>
+		<codecs/es8316/EnableSeq.conf>
+	]
+
+	DisableSequence [
+		cdev "hw:bytchtes8316"
+		<platforms/bytcr/PlatformDisableSeq.conf>
+	]
+
+	Value {
+		PlaybackPCM "hw:bytchtes8316"
+		CapturePCM "hw:bytchtes8316"
+	}
+}
+
+<codecs/es8316/MonoSpeaker.conf>
+<codecs/es8316/HeadPhones.conf>
+
+<codecs/es8316/IN1-HeadsetMic.conf>
+<codecs/es8316/IN2-InternalMic.conf>
src/conf/ucm/bytcht-es8316-mono-spk-in2-mic/Makefile.am new file +4 -0
new file mode 100644
index 00000000..939c8b7d
@@ -0,0 +1,4 @@
+alsaconfigdir = @ALSA_CONFIG_DIR@
+ucmdir = $(alsaconfigdir)/ucm/bytcht-es8316-mono-spk-in2-mic
+ucm_DATA = bytcht-es8316-mono-spk-in2-mic.conf HiFi.conf
+EXTRA_DIST = $(ucm_DATA)
src/conf/ucm/bytcht-es8316-mono-spk-in2-mic/bytcht-es8316-mono-spk-in2-mic.conf new file +8 -0
new file mode 100644
index 00000000..b9885c2d
@@ -0,0 +1,8 @@
+SectionUseCase."HiFi" {
+	File "../bytcht-es8316-mono-spk-in2-mic/HiFi.conf"
+	Comment "Play HiFi quality Music"
+}
+
+SectionDefaults [
+	cdev "hw:bytchtes8316"
+]
src/conf/ucm/bytcht-es8316-stereo-spk-in1-mic/HiFi.conf new file +23 -0
new file mode 100644
index 00000000..9f1801c9
@@ -0,0 +1,23 @@
+SectionVerb {
+	EnableSequence [
+		cdev "hw:bytchtes8316"
+		<platforms/bytcr/PlatformEnableSeq.conf>
+		<codecs/es8316/EnableSeq.conf>
+	]
+
+	DisableSequence [
+		cdev "hw:bytchtes8316"
+		<platforms/bytcr/PlatformDisableSeq.conf>
+	]
+
+	Value {
+		PlaybackPCM "hw:bytchtes8316"
+		CapturePCM "hw:bytchtes8316"
+	}
+}
+
+<codecs/es8316/Speaker.conf>
+<codecs/es8316/HeadPhones.conf>
+
+<codecs/es8316/IN1-InternalMic.conf>
+<codecs/es8316/IN2-HeadsetMic.conf>
src/conf/ucm/bytcht-es8316-stereo-spk-in1-mic/Makefile.am new file +4 -0
new file mode 100644
index 00000000..d3fbb9e9
@@ -0,0 +1,4 @@
+alsaconfigdir = @ALSA_CONFIG_DIR@
+ucmdir = $(alsaconfigdir)/ucm/bytcht-es8316-stereo-spk-in1-mic
+ucm_DATA = bytcht-es8316-stereo-spk-in1-mic.conf HiFi.conf
+EXTRA_DIST = $(ucm_DATA)
src/conf/ucm/bytcht-es8316-stereo-spk-in1-mic/bytcht-es8316-stereo-spk-in1-mic.conf new file +8 -0
new file mode 100644
index 00000000..9bd32664
@@ -0,0 +1,8 @@
+SectionUseCase."HiFi" {
+	File "../bytcht-es8316-stereo-spk-in1-mic/HiFi.conf"
+	Comment "Play HiFi quality Music"
+}
+
+SectionDefaults [
+	cdev "hw:bytchtes8316"
+]
src/conf/ucm/bytcht-es8316-stereo-spk-in2-mic/HiFi.conf new file +23 -0
new file mode 100644
index 00000000..00d4b7fe
@@ -0,0 +1,23 @@
+SectionVerb {
+	EnableSequence [
+		cdev "hw:bytchtes8316"
+		<platforms/bytcr/PlatformEnableSeq.conf>
+		<codecs/es8316/EnableSeq.conf>
+	]
+
+	DisableSequence [
+		cdev "hw:bytchtes8316"
+		<platforms/bytcr/PlatformDisableSeq.conf>
+	]
+
+	Value {
+		PlaybackPCM "hw:bytchtes8316"
+		CapturePCM "hw:bytchtes8316"
+	}
+}
+
+<codecs/es8316/Speaker.conf>
+<codecs/es8316/HeadPhones.conf>
+
+<codecs/es8316/IN1-HeadsetMic.conf>
+<codecs/es8316/IN2-InternalMic.conf>
src/conf/ucm/bytcht-es8316-stereo-spk-in2-mic/Makefile.am new file +4 -0
new file mode 100644
index 00000000..f92fab48
@@ -0,0 +1,4 @@
+alsaconfigdir = @ALSA_CONFIG_DIR@
+ucmdir = $(alsaconfigdir)/ucm/bytcht-es8316-stereo-spk-in2-mic
+ucm_DATA = bytcht-es8316-stereo-spk-in2-mic.conf HiFi.conf
+EXTRA_DIST = $(ucm_DATA)
src/conf/ucm/bytcht-es8316-stereo-spk-in2-mic/bytcht-es8316-stereo-spk-in2-mic.conf new file +8 -0
new file mode 100644
index 00000000..a94f0f70
@@ -0,0 +1,8 @@
+SectionUseCase."HiFi" {
+	File "../bytcht-es8316-stereo-spk-in2-mic/HiFi.conf"
+	Comment "Play HiFi quality Music"
+}
+
+SectionDefaults [
+	cdev "hw:bytchtes8316"
+]
Signature · 1 line
2.20.1
#3 lore raw
In reply to Hans de Goede

Hi,

Quoted 10 lines · Hans de Goede

Hi All,

Here is the UCM profile to match the kernel patches which I just submitted upstream. Note this series is RFC for now, since it depends on the name of a few controls added by the kernel series, as well as on the long_name set by the kernel series.

Once the kernel series has been merged into -next, this UCM profile series can be merged as well. I will send another mail when the kernel series has been accepted.

The kernel patches for this are in -next now, so the alsa-lib patches from this series are now no longer RFC and can be merged now.

Regards,

Hans

#4 lore raw

Dne 7.1.2019 v 12:08 Hans de Goede napsal(a):

Quoted 10 lines

Hi,

Quoted 7 lines · Hans de Goede

Hi All,

Here is the UCM profile to match the kernel patches which I just submitted upstream. Note this series is RFC for now, since it depends on the name of a few controls added by the kernel series, as well as on the long_name set by the kernel series.

Quoted 6 lines
Quoted 3 lines

Once the kernel series has been merged into -next, this UCM profile series can be merged as well. I will send another mail when the kernel series has been accepted.

The kernel patches for this are in -next now, so the alsa-lib patches from this series are now no longer RFC and can be merged now.

I applied both patches. Thanks.

Jaroslav

Signature · 2 lines
Jaroslav Kysela <[email protected]>
Linux Sound Maintainer; ALSA Project; Red Hat, Inc.