Skip to contentSkip to conversation

mac80211: allow overriding HT STBC capabilities

PATCH In review Sergey Matyukevich 2 participants 2 messages Jan 8, 2019 – Jan 14, 2019 mac80211

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mac80211: allow overriding HT STBC capabilities

From: Sergey Matyukevich <[email protected]>

Allow user to override STBC configuration for Rx and Tx spatial streams. In practice RX/TX STBC settings can be modified using appropriate options in wpa_supplicant configuration file:
tx_stbc=-1..1
rx_stbc=-1..3

This functionality has been added to wpa_supplicant in commit cdeea70f59d0.

In FullMAC case these STBC options are passed to drivers by cfg80211 connect callback in fields of cfg80211_connect_params structure. However for mac80211 drivers, e.g. for mac80211_hwsim, overrides for STBC settings are ignored.

The reason why RX/TX STBC capabilities are not modified for mac80211 drivers is as follows. All drivers need to specify supported HT/VHT overrides explicitly: see ht_capa_mod_mask and vht_capa_mod_mask fields of wiphy structure. Only supported overrides will be passed to drivers by cfg80211_connect and cfg80211_mlme_assoc operations: see bitwise 'AND' performed by cfg80211_oper_and_ht_capa and cfg80211_oper_and_vht_capa.

This commit adds RX/TX STBC HT capabilities to mac80211_ht_capa_mod_mask, allowing their modifications, as well as applies requested STBC modifications in function ieee80211_apply_htcap_overrides.

---
 net/mac80211/ht.c   | 8 ++++++++
 net/mac80211/main.c | 2 ++
 2 files changed, 10 insertions(+)
net/mac80211/ht.c +8 -0
index f849ea814993..e03c46ac8e4d 100644
@@ -107,6 +107,14 @@ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata,
 	__check_htcap_enable(ht_capa, ht_capa_mask, ht_cap,
 			     IEEE80211_HT_CAP_40MHZ_INTOLERANT);
 
+	/* Allow user to enable TX STBC bit  */
+	__check_htcap_enable(ht_capa, ht_capa_mask, ht_cap,
+			     IEEE80211_HT_CAP_TX_STBC);
+
+	/* Allow user to configure RX STBC bits */
+	if (ht_capa_mask->cap_info & IEEE80211_HT_CAP_RX_STBC)
+		ht_cap->cap |= ht_capa->cap_info & IEEE80211_HT_CAP_RX_STBC;
+
 	/* Allow user to decrease AMPDU factor */
 	if (ht_capa_mask->ampdu_params_info &
 	    IEEE80211_HT_AMPDU_PARM_FACTOR) {
net/mac80211/main.c +2 -0
index 87a729926734..1114ee217bd6 100644
@@ -478,6 +478,8 @@ static const struct ieee80211_ht_cap mac80211_ht_capa_mod_mask = {
 				IEEE80211_HT_CAP_MAX_AMSDU |
 				IEEE80211_HT_CAP_SGI_20 |
 				IEEE80211_HT_CAP_SGI_40 |
+				IEEE80211_HT_CAP_TX_STBC |
+				IEEE80211_HT_CAP_RX_STBC |
 				IEEE80211_HT_CAP_LDPC_CODING |
 				IEEE80211_HT_CAP_40MHZ_INTOLERANT),
 	.mcs = {
Signature · 1 line
2.20.1
#1 lore raw
Quoted 14 lines

From: Sergey Matyukevich <[email protected]>

Allow user to override STBC configuration for Rx and Tx spatial streams. In practice RX/TX STBC settings can be modified using appropriate options in wpa_supplicant configuration file:
tx_stbc=-1..1
rx_stbc=-1..3

This functionality has been added to wpa_supplicant in commit cdeea70f59d0.

In FullMAC case these STBC options are passed to drivers by cfg80211 connect callback in fields of cfg80211_connect_params structure. However for mac80211 drivers, e.g. for mac80211_hwsim, overrides for STBC settings are ignored.

...

Quoted 5 lines
---
 net/mac80211/ht.c   | 8 ++++++++
 net/mac80211/main.c | 2 ++
 2 files changed, 10 insertions(+)

FWIW, the accompanying RFC patch extending STBC tests in hwsim hostapd test suite has been posted to hostapd mailing list:

http://lists.infradead.org/pipermail/hostap/2019-January/039274.html

Regards,
Sergey