json: Fix % handling when not interpolating
PATCH 1/1 json: Fix % handling when not interpolating
commit 8bca4613 added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.
--- qobject/json-parser.c | 10 ++++++---- tests/check-qjson.c | 5 +++++ 2 files changed, 11 insertions(+), 4 deletions(-)
qobject/json-parser.c +6 -4
@@ -208,11 +208,13 @@ static QString *parse_string(JSONParserContext *ctxt, JSONToken *token) }break ;case '%' : -if (ctxt->ap && ptr[1 ] !='%' ) { -parse_error (ctxt, token,"can't interpolate into string" ); - goto out; +if (ctxt->ap) { +if (ptr[1 ] !='%' ) { +parse_error (ctxt, token,"can't interpolate into string" ); + goto out; + } + ptr++; } - ptr++;/* fall through */ default : cp =mod_utf8_codepoint (ptr,6 , &end);
tests/check-qjson.c +5 -0
@@ -175,6 +175,11 @@ static void utf8_string(void)"\xCE\xBA\xE1\xBD\xB9\xCF\x83\xCE\xBC\xCE\xB5" ,"\xCE\xBA\xE1\xBD\xB9\xCF\x83\xCE\xBC\xCE\xB5" ,"\\u03BA\\u1F79\\u03C3\\u03BC\\u03B5" , + }, + /* '%' character when not interpolating */ + { +"100%" , + "100%", },/* 2 Boundary condition test cases */ /* 2.1 First possible sequence of a certain length */
Signature · 1 line
2.20.1
Adding Markus to cc: list, I forgot to do it when sending the patch.
Christophe
Quoted 53 lines · Christophe Fergeau
commit
8bca4613added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.Signed-off-by Christophe Fergeau <[email protected]>--- qobject/json-parser.c | 10 ++++++---- tests/check-qjson.c | 5 +++++ 2 files changed, 11 insertions(+), 4 deletions(-)qobject/json-parser.c +6
-4@@ -208,11 +208,13 @@ static QString *parse_string(JSONParserContext *ctxt, JSONToken *token) }break ;case '%' : -if (ctxt->ap && ptr[1 ] !='%' ) { -parse_error (ctxt, token,"can't interpolate into string" ); - goto out; +if (ctxt->ap) { +if (ptr[1 ] !='%' ) { +parse_error (ctxt, token,"can't interpolate into string" ); + goto out; + } + ptr++; } - ptr++;/* fall through */ default : cp =mod_utf8_codepoint (ptr,6 , &end);tests/check-qjson.c +5
-0@@ -175,6 +175,11 @@ static void utf8_string(void)"\xCE\xBA\xE1\xBD\xB9\xCF\x83\xCE\xBC\xCE\xB5" ,"\xCE\xBA\xE1\xBD\xB9\xCF\x83\xCE\xBC\xCE\xB5" ,"\\u03BA\\u1F79\\u03C3\\u03BC\\u03B5" , + }, + /* '%' character when not interpolating */ + { +"100%" , + "100%", },/* 2 Boundary condition test cases */ /* 2.1 First possible sequence of a certain length */ Signature · 1 line
2.20.1
Eric Blake
Reviewed-byQuoted 1 line · Christophe Fergeau
Adding Markus to cc: list, I forgot to do it when sending the patch.
Also worth backporting via qemu-stable, now in cc.
Quoted 15 lines
Christophe
Quoted 11 lines · Christophe Fergeau
commit
8bca4613added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.Signed-off-by Christophe Fergeau <[email protected]>--- qobject/json-parser.c | 10 ++++++---- tests/check-qjson.c | 5 +++++ 2 files changed, 11 insertions(+), 4 deletions(-)
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org
Quoted 13 lines · Eric Blake
Quoted 1 line · Christophe Fergeau
Adding Markus to cc: list, I forgot to do it when sending the patch.
Also worth backporting via qemu-stable, now in cc.
Quoted 8 lines
Christophe
Quoted 4 lines · Christophe Fergeau
commit
8bca4613added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.
Impact?
If you're unable to assess, could you give us at least a reproducer?
Quoted 8 lines
Quoted 6 lines
Quoted 6 lines
Signed-off-by Christophe Fergeau <[email protected]>--- qobject/json-parser.c | 10 ++++++---- tests/check-qjson.c | 5 +++++ 2 files changed, 11 insertions(+), 4 deletions(-)Reviewed-by Eric Blake <[email protected]>
Patch looks good to me, but I'd like us to improve the commit message.
Quoted 11 lines · Markus Armbruster
Quoted 9 lines · Eric Blake
Quoted 1 line · Christophe Fergeau
Adding Markus to cc: list, I forgot to do it when sending the patch.
Also worth backporting via qemu-stable, now in cc.
Quoted 4 lines
Christophe
On Wed, Jan 02, 2019 at 03:05:35PM +0100, Christophe Fergeau wrote:
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
commit
8bca4613added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.Impact?
If you're unable to assess, could you give us at least a reproducer?
Another thread pointed out that Spice passwords involving % get corrupted.
Quoted 11 lines
Quoted 9 lines
Quoted 7 lines
Quoted 7 lines
Signed-off-by Christophe Fergeau <[email protected]>--- qobject/json-parser.c | 10 ++++++---- tests/check-qjson.c | 5 +++++ 2 files changed, 11 insertions(+), 4 deletions(-)Reviewed-by Eric Blake <[email protected]>Patch looks good to me, but I'd like us to improve the commit message.
Indeed.
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org
Quoted 11 lines · Markus Armbruster
Quoted 9 lines · Eric Blake
Quoted 1 line · Christophe Fergeau
Adding Markus to cc: list, I forgot to do it when sending the patch.
Also worth backporting via qemu-stable, now in cc.
Quoted 4 lines
Christophe
On Wed, Jan 02, 2019 at 03:05:35PM +0100, Christophe Fergeau wrote:
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
commit
8bca4613added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.Impact?
If you're unable to assess, could you give us at least a reproducer?
This all came from https://lists.freedesktop.org/archives/spice-devel/2018-December/046644.html
Setting up a VM with libvirt with <graphics type='spice' autoport='yes' passwd='password%'/> fails to start with:
qemu-system-x86_64: qobject/json-parser.c:146: parse_string: Assertion `*ptr' failed.
If you use 'password%%' as the password instead, when trying to connect to the VM, you type 'password%' as the password instead of 'password%%' as configured in the domain XML.
Christophe
Copying block maintainers for help with assessing the bug's (non-)impact on security.
Quoted 21 lines · Christophe Fergeau
Quoted 11 lines · Markus Armbruster
Quoted 9 lines · Eric Blake
Quoted 1 line · Christophe Fergeau
Adding Markus to cc: list, I forgot to do it when sending the patch.
Also worth backporting via qemu-stable, now in cc.
Quoted 4 lines
Christophe
On Wed, Jan 02, 2019 at 03:05:35PM +0100, Christophe Fergeau wrote:
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
commit
8bca4613added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.Impact?
If you're unable to assess, could you give us at least a reproducer?
Quoted 8 lines
This all came from https://lists.freedesktop.org/archives/spice-devel/2018-December/046644.html
Setting up a VM with libvirt with <graphics type='spice' autoport='yes' passwd='password%'/> fails to start with:
qemu-system-x86_64:qobject/json-parser.c:146:parse_string: Assertion `*ptr' failed.If you use 'password%%' as the password instead, when trying to connect to the VM, you type 'password%' as the password instead of 'password%%' as configured in the domain XML.
Thanks.
As the commit message says, the bug bites when we parse a string containing '%s' with !ctxt->ap. The parser then swallows a character. If it swallows the terminating '"', it fails the assertion.
We parse with !ctxt->ap in the following cases:
* Tests (tests/check-qjson.c, tests/test-qobject-input-visitor.c, tests/test-visitor-serialization.c)
Plenty of tests, but we still failed to cover the buggy case :(
* QMP input (monitor.c)
* QGA input (qga/main.c)
* qobject_from_json()
- JSON pseudo-filenames (block.c)
These are pseudo-filenames starting with "json:".
- JSON key pairs (block/rbd.c)
As far as I can tell, these can come only from pseudo-filenames starting with "rbd:".
- JSON command line option arguments of -display and -blockdev
(qobject-input-visitor.c)
Reproducer: -blockdev '{"%"}'Command line, QMP and QGA input are trusted.
Filenames are trusted when they come from command line, QMP or HMP. They are untrusted when they come from from image file headers.
Example: QCOW2 backing file name. Note that this is *not* the security boundary between host and guest. It's the boundary between host and an image file from an untrusted source.
I can't see how the bug could be exploited. Neither failing an assertion nor skipping a character in a filename of your choice is interesting. We don't support compiling with NDEBUG.
Kevin, Max, do you agree?
Quoted 76 lines · Markus Armbruster
Copying block maintainers for help with assessing the bug's (non-)impact on security.
Quoted 21 lines · Christophe Fergeau
Quoted 11 lines · Markus Armbruster
Quoted 9 lines · Eric Blake
Quoted 1 line · Christophe Fergeau
Adding Markus to cc: list, I forgot to do it when sending the patch.
Also worth backporting via qemu-stable, now in cc.
Quoted 4 lines
Christophe
On Wed, Jan 02, 2019 at 03:05:35PM +0100, Christophe Fergeau wrote:
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
commit
8bca4613added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.Impact?
If you're unable to assess, could you give us at least a reproducer?
Quoted 8 lines
This all came from https://lists.freedesktop.org/archives/spice-devel/2018-December/046644.html
Setting up a VM with libvirt with <graphics type='spice' autoport='yes' passwd='password%'/> fails to start with:
qemu-system-x86_64:qobject/json-parser.c:146:parse_string: Assertion `*ptr' failed.If you use 'password%%' as the password instead, when trying to connect to the VM, you type 'password%' as the password instead of 'password%%' as configured in the domain XML.
Thanks.
As the commit message says, the bug bites when we parse a string containing '%s' with !ctxt->ap. The parser then swallows a character. If it swallows the terminating '"', it fails the assertion.
We parse with !ctxt->ap in the following cases:
* Tests (
tests/check-qjson.c,tests/test-qobject-input-visitor.c,tests/test-visitor-serialization.c)Plenty of tests, but we still failed to cover the buggy case :(
* QMP input (
monitor.c)* QGA input (
qga/main.c)*
qobject_from_json()- JSON pseudo-filenames (
block.c)These are pseudo-filenames starting with "json:".
- JSON key pairs (
block/rbd.c)As far as I can tell, these can come only from pseudo-filenames starting with "rbd:".
- JSON command line option arguments of -display and -blockdev
(qobject-input-visitor.c) Reproducer: -blockdev '{"%"}'Command line, QMP and QGA input are trusted.
Filenames are trusted when they come from command line, QMP or HMP. They are untrusted when they come from from image file headers.
Example: QCOW2 backing file name. Note that this is *not* the security boundary between host and guest. It's the boundary between host and an image file from an untrusted source.
Quoted 5 lines
I can't see how the bug could be exploited. Neither failing an assertion nor skipping a character in a filename of your choice is interesting. We don't support compiling with NDEBUG.
Kevin, Max, do you agree?
I wouldn't call it "not interesting" if adding an image to your VM at runtime can crash the whole thing.
(qemu-img create -f qcow2 -u -b 'json:{"%"}' foo.qcow2 64M)
Whether this is a security issue... I don't know, but it is a DoS.
Max
Quoted 81 lines · Max Reitz
Quoted 80 lines · Markus Armbruster
Copying block maintainers for help with assessing the bug's (non-)impact on security.
Quoted 21 lines · Christophe Fergeau
Quoted 11 lines · Markus Armbruster
Quoted 9 lines · Eric Blake
Quoted 1 line · Christophe Fergeau
Adding Markus to cc: list, I forgot to do it when sending the patch.
Also worth backporting via qemu-stable, now in cc.
Quoted 4 lines
Christophe
On Wed, Jan 02, 2019 at 03:05:35PM +0100, Christophe Fergeau wrote:
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
commit
8bca4613added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.Impact?
If you're unable to assess, could you give us at least a reproducer?
Quoted 8 lines
This all came from https://lists.freedesktop.org/archives/spice-devel/2018-December/046644.html
Setting up a VM with libvirt with <graphics type='spice' autoport='yes' passwd='password%'/> fails to start with:
qemu-system-x86_64:qobject/json-parser.c:146:parse_string: Assertion `*ptr' failed.If you use 'password%%' as the password instead, when trying to connect to the VM, you type 'password%' as the password instead of 'password%%' as configured in the domain XML.
Thanks.
As the commit message says, the bug bites when we parse a string containing '%s' with !ctxt->ap. The parser then swallows a character. If it swallows the terminating '"', it fails the assertion.
We parse with !ctxt->ap in the following cases:
* Tests (
tests/check-qjson.c,tests/test-qobject-input-visitor.c,tests/test-visitor-serialization.c)Plenty of tests, but we still failed to cover the buggy case :(
* QMP input (
monitor.c)* QGA input (
qga/main.c)*
qobject_from_json()- JSON pseudo-filenames (
block.c)These are pseudo-filenames starting with "json:".
- JSON key pairs (
block/rbd.c)As far as I can tell, these can come only from pseudo-filenames starting with "rbd:".
- JSON command line option arguments of -display and -blockdev
(qobject-input-visitor.c) Reproducer: -blockdev '{"%"}'Command line, QMP and QGA input are trusted.
Filenames are trusted when they come from command line, QMP or HMP. They are untrusted when they come from from image file headers.
Example: QCOW2 backing file name. Note that this is *not* the security boundary between host and guest. It's the boundary between host and an image file from an untrusted source.I can't see how the bug could be exploited. Neither failing an assertion nor skipping a character in a filename of your choice is interesting. We don't support compiling with NDEBUG.
Quoted 6 lines
Quoted 1 line
Kevin, Max, do you agree?
I wouldn't call it "not interesting" if adding an image to your VM at runtime can crash the whole thing.
(qemu-img create -f qcow2 -u -b 'json:{"%"}' foo.qcow2 64M)
"Not interesting" strictly from the point of view of exploiting the bug to penetrate trust boundaries.
Quoted 1 line
Whether this is a security issue... I don't know, but it is a DoS.
I'm not sure whether feeding untrusted images to QEMU is a good idea in general --- there's so much that could go wrong. How hardened against abuse are out block drivers?
I figure what distinguishes this case is how utterly trivial creating a "bad" image is.
Anyway, you are the block layer maintainers, so you get to decide whether to give this the full security bug treatment. I'm merely the clown who broke it %-/
Quoted 90 lines · Markus Armbruster
Quoted 81 lines · Max Reitz
Quoted 80 lines · Markus Armbruster
Copying block maintainers for help with assessing the bug's (non-)impact on security.
Quoted 21 lines · Christophe Fergeau
Quoted 11 lines · Markus Armbruster
Quoted 9 lines · Eric Blake
Quoted 1 line · Christophe Fergeau
Adding Markus to cc: list, I forgot to do it when sending the patch.
Also worth backporting via qemu-stable, now in cc.
Quoted 4 lines
Christophe
On Wed, Jan 02, 2019 at 03:05:35PM +0100, Christophe Fergeau wrote:
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
commit
8bca4613added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.Impact?
If you're unable to assess, could you give us at least a reproducer?
Quoted 8 lines
This all came from https://lists.freedesktop.org/archives/spice-devel/2018-December/046644.html
Setting up a VM with libvirt with <graphics type='spice' autoport='yes' passwd='password%'/> fails to start with:
qemu-system-x86_64:qobject/json-parser.c:146:parse_string: Assertion `*ptr' failed.If you use 'password%%' as the password instead, when trying to connect to the VM, you type 'password%' as the password instead of 'password%%' as configured in the domain XML.
Thanks.
As the commit message says, the bug bites when we parse a string containing '%s' with !ctxt->ap. The parser then swallows a character. If it swallows the terminating '"', it fails the assertion.
We parse with !ctxt->ap in the following cases:
* Tests (
tests/check-qjson.c,tests/test-qobject-input-visitor.c,tests/test-visitor-serialization.c)Plenty of tests, but we still failed to cover the buggy case :(
* QMP input (
monitor.c)* QGA input (
qga/main.c)*
qobject_from_json()- JSON pseudo-filenames (
block.c)These are pseudo-filenames starting with "json:".
- JSON key pairs (
block/rbd.c)As far as I can tell, these can come only from pseudo-filenames starting with "rbd:".
- JSON command line option arguments of -display and -blockdev
(qobject-input-visitor.c) Reproducer: -blockdev '{"%"}'Command line, QMP and QGA input are trusted.
Filenames are trusted when they come from command line, QMP or HMP. They are untrusted when they come from from image file headers.
Example: QCOW2 backing file name. Note that this is *not* the security boundary between host and guest. It's the boundary between host and an image file from an untrusted source.I can't see how the bug could be exploited. Neither failing an assertion nor skipping a character in a filename of your choice is interesting. We don't support compiling with NDEBUG.
Quoted 6 lines
Quoted 1 line
Kevin, Max, do you agree?
I wouldn't call it "not interesting" if adding an image to your VM at runtime can crash the whole thing.
(qemu-img create -f qcow2 -u -b 'json:{"%"}' foo.qcow2 64M)
Quoted 8 lines
"Not interesting" strictly from the point of view of exploiting the bug to penetrate trust boundaries.
Quoted 1 line
Whether this is a security issue... I don't know, but it is a DoS.
I'm not sure whether feeding untrusted images to QEMU is a good idea in general --- there's so much that could go wrong. How hardened against abuse are out block drivers?
They are supposed to handle such cases gracefully, that's for sure. At least for qcow2 we do care about it.
Quoted 2 lines
I figure what distinguishes this case is how utterly trivial creating a "bad" image is.
I don't think an untrusted image should be able to crash qemu.
Quoted 3 lines
Anyway, you are the block layer maintainers, so you get to decide whether to give this the full security bug treatment. I'm merely the clown who broke it %-/
Er, then I suppose it is no security bug? O:-)
Max
Quoted 100 lines · Max Reitz
Quoted 90 lines · Markus Armbruster
Quoted 81 lines · Max Reitz
Quoted 80 lines · Markus Armbruster
Copying block maintainers for help with assessing the bug's (non-)impact on security.
Quoted 21 lines · Christophe Fergeau
Quoted 11 lines · Markus Armbruster
Quoted 9 lines · Eric Blake
Quoted 1 line · Christophe Fergeau
Adding Markus to cc: list, I forgot to do it when sending the patch.
Also worth backporting via qemu-stable, now in cc.
Quoted 4 lines
Christophe
On Wed, Jan 02, 2019 at 03:05:35PM +0100, Christophe Fergeau wrote:
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
commit
8bca4613added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.Impact?
If you're unable to assess, could you give us at least a reproducer?
Quoted 8 lines
This all came from https://lists.freedesktop.org/archives/spice-devel/2018-December/046644.html
Setting up a VM with libvirt with <graphics type='spice' autoport='yes' passwd='password%'/> fails to start with:
qemu-system-x86_64:qobject/json-parser.c:146:parse_string: Assertion `*ptr' failed.If you use 'password%%' as the password instead, when trying to connect to the VM, you type 'password%' as the password instead of 'password%%' as configured in the domain XML.
Thanks.
As the commit message says, the bug bites when we parse a string containing '%s' with !ctxt->ap. The parser then swallows a character. If it swallows the terminating '"', it fails the assertion.
We parse with !ctxt->ap in the following cases:
* Tests (
tests/check-qjson.c,tests/test-qobject-input-visitor.c,tests/test-visitor-serialization.c)Plenty of tests, but we still failed to cover the buggy case :(
* QMP input (
monitor.c)* QGA input (
qga/main.c)*
qobject_from_json()- JSON pseudo-filenames (
block.c)These are pseudo-filenames starting with "json:".
- JSON key pairs (
block/rbd.c)As far as I can tell, these can come only from pseudo-filenames starting with "rbd:".
- JSON command line option arguments of -display and -blockdev
(qobject-input-visitor.c) Reproducer: -blockdev '{"%"}'Command line, QMP and QGA input are trusted.
Filenames are trusted when they come from command line, QMP or HMP. They are untrusted when they come from from image file headers.
Example: QCOW2 backing file name. Note that this is *not* the security boundary between host and guest. It's the boundary between host and an image file from an untrusted source.I can't see how the bug could be exploited. Neither failing an assertion nor skipping a character in a filename of your choice is interesting. We don't support compiling with NDEBUG.
Quoted 6 lines
Quoted 1 line
Kevin, Max, do you agree?
I wouldn't call it "not interesting" if adding an image to your VM at runtime can crash the whole thing.
(qemu-img create -f qcow2 -u -b 'json:{"%"}' foo.qcow2 64M)
Quoted 8 lines
"Not interesting" strictly from the point of view of exploiting the bug to penetrate trust boundaries.
Quoted 1 line
Whether this is a security issue... I don't know, but it is a DoS.
I'm not sure whether feeding untrusted images to QEMU is a good idea in general --- there's so much that could go wrong. How hardened against abuse are out block drivers?
Quoted 7 lines
They are supposed to handle such cases gracefully, that's for sure. At least for qcow2 we do care about it.
Quoted 2 lines
I figure what distinguishes this case is how utterly trivial creating a "bad" image is.
I don't think an untrusted image should be able to crash qemu.
"Should" in the sense of "if they don't, it's a bug, and we'll do what we can to fix it", or "if they don't, I'll be surprised"?
Quoted 5 lines
Quoted 3 lines
Anyway, you are the block layer maintainers, so you get to decide whether to give this the full security bug treatment. I'm merely the clown who broke it %-/
Er, then I suppose it is no security bug? O:-)
I'm not charging toll for the bridge I built for you ;)
Quoted 105 lines · Markus Armbruster
Quoted 103 lines · Max Reitz
Quoted 90 lines · Markus Armbruster
Quoted 81 lines · Max Reitz
Quoted 80 lines · Markus Armbruster
Copying block maintainers for help with assessing the bug's (non-)impact on security.
Quoted 21 lines · Christophe Fergeau
Quoted 11 lines · Markus Armbruster
Quoted 9 lines · Eric Blake
Quoted 1 line · Christophe Fergeau
Adding Markus to cc: list, I forgot to do it when sending the patch.
Also worth backporting via qemu-stable, now in cc.
Quoted 4 lines
Christophe
On Wed, Jan 02, 2019 at 03:05:35PM +0100, Christophe Fergeau wrote:
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
commit
8bca4613added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.Impact?
If you're unable to assess, could you give us at least a reproducer?
Quoted 8 lines
This all came from https://lists.freedesktop.org/archives/spice-devel/2018-December/046644.html
Setting up a VM with libvirt with <graphics type='spice' autoport='yes' passwd='password%'/> fails to start with:
qemu-system-x86_64:qobject/json-parser.c:146:parse_string: Assertion `*ptr' failed.If you use 'password%%' as the password instead, when trying to connect to the VM, you type 'password%' as the password instead of 'password%%' as configured in the domain XML.
Thanks.
As the commit message says, the bug bites when we parse a string containing '%s' with !ctxt->ap. The parser then swallows a character. If it swallows the terminating '"', it fails the assertion.
We parse with !ctxt->ap in the following cases:
* Tests (
tests/check-qjson.c,tests/test-qobject-input-visitor.c,tests/test-visitor-serialization.c)Plenty of tests, but we still failed to cover the buggy case :(
* QMP input (
monitor.c)* QGA input (
qga/main.c)*
qobject_from_json()- JSON pseudo-filenames (
block.c)These are pseudo-filenames starting with "json:".
- JSON key pairs (
block/rbd.c)As far as I can tell, these can come only from pseudo-filenames starting with "rbd:".
- JSON command line option arguments of -display and -blockdev
(qobject-input-visitor.c) Reproducer: -blockdev '{"%"}'Command line, QMP and QGA input are trusted.
Filenames are trusted when they come from command line, QMP or HMP. They are untrusted when they come from from image file headers.
Example: QCOW2 backing file name. Note that this is *not* the security boundary between host and guest. It's the boundary between host and an image file from an untrusted source.I can't see how the bug could be exploited. Neither failing an assertion nor skipping a character in a filename of your choice is interesting. We don't support compiling with NDEBUG.
Quoted 6 lines
Quoted 1 line
Kevin, Max, do you agree?
I wouldn't call it "not interesting" if adding an image to your VM at runtime can crash the whole thing.
(qemu-img create -f qcow2 -u -b 'json:{"%"}' foo.qcow2 64M)
Quoted 8 lines
"Not interesting" strictly from the point of view of exploiting the bug to penetrate trust boundaries.
Quoted 1 line
Whether this is a security issue... I don't know, but it is a DoS.
I'm not sure whether feeding untrusted images to QEMU is a good idea in general --- there's so much that could go wrong. How hardened against abuse are out block drivers?
They are supposed to handle such cases gracefully, that's for sure. At least for qcow2 we do care about it.
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
I figure what distinguishes this case is how utterly trivial creating a "bad" image is.
I don't think an untrusted image should be able to crash qemu.
"Should" in the sense of "if they don't, it's a bug, and we'll do what we can to fix it", or "if they don't, I'll be surprised"?
Depends. If it's Linux's VMM design (lazy allocation + OOM killer), I don't care. If there is something we can do to fix it, I do think it's a bug.
Max
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
Anyway, you are the block layer maintainers, so you get to decide whether to give this the full security bug treatment. I'm merely the clown who broke it %-/
Er, then I suppose it is no security bug? O:-)
I'm not charging toll for the bridge I built for you ;
Quoted 93 lines · Markus Armbruster
Quoted 81 lines · Max Reitz
Quoted 80 lines · Markus Armbruster
Copying block maintainers for help with assessing the bug's (non-)impact on security.
Quoted 21 lines · Christophe Fergeau
Quoted 11 lines · Markus Armbruster
Quoted 9 lines · Eric Blake
Quoted 1 line · Christophe Fergeau
Adding Markus to cc: list, I forgot to do it when sending the patch.
Also worth backporting via qemu-stable, now in cc.
Quoted 4 lines
Christophe
On Wed, Jan 02, 2019 at 03:05:35PM +0100, Christophe Fergeau wrote:
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
commit
8bca4613added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.Impact?
If you're unable to assess, could you give us at least a reproducer?
Quoted 8 lines
This all came from https://lists.freedesktop.org/archives/spice-devel/2018-December/046644.html
Setting up a VM with libvirt with <graphics type='spice' autoport='yes' passwd='password%'/> fails to start with:
qemu-system-x86_64:qobject/json-parser.c:146:parse_string: Assertion `*ptr' failed.If you use 'password%%' as the password instead, when trying to connect to the VM, you type 'password%' as the password instead of 'password%%' as configured in the domain XML.
Thanks.
As the commit message says, the bug bites when we parse a string containing '%s' with !ctxt->ap. The parser then swallows a character. If it swallows the terminating '"', it fails the assertion.
We parse with !ctxt->ap in the following cases:
* Tests (
tests/check-qjson.c,tests/test-qobject-input-visitor.c,tests/test-visitor-serialization.c)Plenty of tests, but we still failed to cover the buggy case :(
* QMP input (
monitor.c)* QGA input (
qga/main.c)*
qobject_from_json()- JSON pseudo-filenames (
block.c)These are pseudo-filenames starting with "json:".
- JSON key pairs (
block/rbd.c)As far as I can tell, these can come only from pseudo-filenames starting with "rbd:".
- JSON command line option arguments of -display and -blockdev
(qobject-input-visitor.c) Reproducer: -blockdev '{"%"}'Command line, QMP and QGA input are trusted.
Filenames are trusted when they come from command line, QMP or HMP. They are untrusted when they come from from image file headers.
Example: QCOW2 backing file name. Note that this is *not* the security boundary between host and guest. It's the boundary between host and an image file from an untrusted source.I can't see how the bug could be exploited. Neither failing an assertion nor skipping a character in a filename of your choice is interesting. We don't support compiling with NDEBUG.
Quoted 6 lines
Quoted 1 line
Kevin, Max, do you agree?
I wouldn't call it "not interesting" if adding an image to your VM at runtime can crash the whole thing.
(qemu-img create -f qcow2 -u -b 'json:{"%"}' foo.qcow2 64M)
"Not interesting" strictly from the point of view of exploiting the bug to penetrate trust boundaries.
Quoted 8 lines
Quoted 1 line
Whether this is a security issue... I don't know, but it is a DoS.
I'm not sure whether feeding untrusted images to QEMU is a good idea in general --- there's so much that could go wrong. How hardened against abuse are out block drivers?
I figure what distinguishes this case is how utterly trivial creating a "bad" image is.
Consider that you can already create a qcow2 image with a backing file of /etc/shadow. Or create a qcow2 image many EB in size that causes QEMU to allocate massive amounts of RAM and/or burn CPU time, and so on.
IOW, mgmt apps should never pass untrusted images to QEMU. Crashing is just one of many bad things, and probably not the worst that can happen.
They need to do validation upfront in some manner if receiving an untrustworthy image. Openstack does this by running qemu-img, with limits set on virutal memory size, CPU time, and then rejecting any image with a backing file from being used at all.
Quoted 3 lines
Anyway, you are the block layer maintainers, so you get to decide whether to give this the full security bug treatment. I'm merely the clown who broke it %-/
Accepting an image with any backing file at all from an untrusted user would be a flaw in the layered management app itself, not QEMU.
So I think it would only be considered a security bug in QEMU if there was a way for an unprivileged user to trick QEMU into writing malformed JSON into an otherwise trusted image.
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Quoted 100 lines · Daniel P. Berrangé
Quoted 99 lines · Markus Armbruster
Quoted 81 lines · Max Reitz
Quoted 80 lines · Markus Armbruster
Copying block maintainers for help with assessing the bug's (non-)impact on security.
Quoted 21 lines · Christophe Fergeau
Quoted 11 lines · Markus Armbruster
Quoted 9 lines · Eric Blake
Quoted 1 line · Christophe Fergeau
Adding Markus to cc: list, I forgot to do it when sending the patch.
Also worth backporting via qemu-stable, now in cc.
Quoted 4 lines
Christophe
On Wed, Jan 02, 2019 at 03:05:35PM +0100, Christophe Fergeau wrote:
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
commit
8bca4613added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.Impact?
If you're unable to assess, could you give us at least a reproducer?
Quoted 8 lines
This all came from https://lists.freedesktop.org/archives/spice-devel/2018-December/046644.html
Setting up a VM with libvirt with <graphics type='spice' autoport='yes' passwd='password%'/> fails to start with:
qemu-system-x86_64:qobject/json-parser.c:146:parse_string: Assertion `*ptr' failed.If you use 'password%%' as the password instead, when trying to connect to the VM, you type 'password%' as the password instead of 'password%%' as configured in the domain XML.
Thanks.
As the commit message says, the bug bites when we parse a string containing '%s' with !ctxt->ap. The parser then swallows a character. If it swallows the terminating '"', it fails the assertion.
We parse with !ctxt->ap in the following cases:
* Tests (
tests/check-qjson.c,tests/test-qobject-input-visitor.c,tests/test-visitor-serialization.c)Plenty of tests, but we still failed to cover the buggy case :(
* QMP input (
monitor.c)* QGA input (
qga/main.c)*
qobject_from_json()- JSON pseudo-filenames (
block.c)These are pseudo-filenames starting with "json:".
- JSON key pairs (
block/rbd.c)As far as I can tell, these can come only from pseudo-filenames starting with "rbd:".
- JSON command line option arguments of -display and -blockdev
(qobject-input-visitor.c) Reproducer: -blockdev '{"%"}'Command line, QMP and QGA input are trusted.
Filenames are trusted when they come from command line, QMP or HMP. They are untrusted when they come from from image file headers.
Example: QCOW2 backing file name. Note that this is *not* the security boundary between host and guest. It's the boundary between host and an image file from an untrusted source.I can't see how the bug could be exploited. Neither failing an assertion nor skipping a character in a filename of your choice is interesting. We don't support compiling with NDEBUG.
Quoted 6 lines
Quoted 1 line
Kevin, Max, do you agree?
I wouldn't call it "not interesting" if adding an image to your VM at runtime can crash the whole thing.
(qemu-img create -f qcow2 -u -b 'json:{"%"}' foo.qcow2 64M)
"Not interesting" strictly from the point of view of exploiting the bug to penetrate trust boundaries.
Quoted 1 line
Whether this is a security issue... I don't know, but it is a DoS.
I'm not sure whether feeding untrusted images to QEMU is a good idea in general --- there's so much that could go wrong. How hardened against abuse are out block drivers?
Quoted 5 lines
Quoted 2 lines
I figure what distinguishes this case is how utterly trivial creating a "bad" image is.
Consider that you can already create a qcow2 image with a backing file of
/etc/shadow.
If you cannot access this file, then it should just be an error and not crash qemu.
If you can access this file, that's your own fault for bad permissions.
Quoted 2 lines
Or create a qcow2 image many EB in size that causes QEMU to allocate massive amounts of RAM and/or burn CPU time, and so on.
That would be the qcow2 driver's fault. We do try to open only images which are sane.
And memory allocation failures should be handled gracefully, so the VM shouldn't crash. Well, at least qcow2 does its best, what Linux makes of it, who knows. (e.g. it may assign the memory to qemu and then the OOM killer may crash it later)
Quoted 12 lines
IOW, mgmt apps should never pass untrusted images to QEMU. Crashing is just one of many bad things, and probably not the worst that can happen.
They need to do validation upfront in some manner if receiving an untrustworthy image. Openstack does this by running qemu-img, with limits set on virutal memory size, CPU time, and then rejecting any image with a backing file from being used at all.
Quoted 3 lines
Anyway, you are the block layer maintainers, so you get to decide whether to give this the full security bug treatment. I'm merely the clown who broke it %-/
Quoted 6 lines
Accepting an image with any backing file at all from an untrusted user would be a flaw in the layered management app itself, not QEMU.
So I think it would only be considered a security bug in QEMU if there was a way for an unprivileged user to trick QEMU into writing malformed JSON into an otherwise trusted image.
Not making it a security bug makes me happy, of course, but I don't quite agree that qemu is not to blame if you pass it some image which makes it crash.
Max
Quoted 110 lines · Max Reitz
Quoted 100 lines · Daniel P. Berrangé
Quoted 99 lines · Markus Armbruster
Quoted 81 lines · Max Reitz
Quoted 80 lines · Markus Armbruster
Copying block maintainers for help with assessing the bug's (non-)impact on security.
Quoted 21 lines · Christophe Fergeau
Quoted 11 lines · Markus Armbruster
Quoted 9 lines · Eric Blake
Quoted 1 line · Christophe Fergeau
Adding Markus to cc: list, I forgot to do it when sending the patch.
Also worth backporting via qemu-stable, now in cc.
Quoted 4 lines
Christophe
On Wed, Jan 02, 2019 at 03:05:35PM +0100, Christophe Fergeau wrote:
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
commit
8bca4613added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.Impact?
If you're unable to assess, could you give us at least a reproducer?
Quoted 8 lines
This all came from https://lists.freedesktop.org/archives/spice-devel/2018-December/046644.html
Setting up a VM with libvirt with <graphics type='spice' autoport='yes' passwd='password%'/> fails to start with:
qemu-system-x86_64:qobject/json-parser.c:146:parse_string: Assertion `*ptr' failed.If you use 'password%%' as the password instead, when trying to connect to the VM, you type 'password%' as the password instead of 'password%%' as configured in the domain XML.
Thanks.
As the commit message says, the bug bites when we parse a string containing '%s' with !ctxt->ap. The parser then swallows a character. If it swallows the terminating '"', it fails the assertion.
We parse with !ctxt->ap in the following cases:
* Tests (
tests/check-qjson.c,tests/test-qobject-input-visitor.c,tests/test-visitor-serialization.c)Plenty of tests, but we still failed to cover the buggy case :(
* QMP input (
monitor.c)* QGA input (
qga/main.c)*
qobject_from_json()- JSON pseudo-filenames (
block.c)These are pseudo-filenames starting with "json:".
- JSON key pairs (
block/rbd.c)As far as I can tell, these can come only from pseudo-filenames starting with "rbd:".
- JSON command line option arguments of -display and -blockdev
(qobject-input-visitor.c) Reproducer: -blockdev '{"%"}'Command line, QMP and QGA input are trusted.
Filenames are trusted when they come from command line, QMP or HMP. They are untrusted when they come from from image file headers.
Example: QCOW2 backing file name. Note that this is *not* the security boundary between host and guest. It's the boundary between host and an image file from an untrusted source.I can't see how the bug could be exploited. Neither failing an assertion nor skipping a character in a filename of your choice is interesting. We don't support compiling with NDEBUG.
Quoted 6 lines
Quoted 1 line
Kevin, Max, do you agree?
I wouldn't call it "not interesting" if adding an image to your VM at runtime can crash the whole thing.
(qemu-img create -f qcow2 -u -b 'json:{"%"}' foo.qcow2 64M)
"Not interesting" strictly from the point of view of exploiting the bug to penetrate trust boundaries.
Quoted 1 line
Whether this is a security issue... I don't know, but it is a DoS.
I'm not sure whether feeding untrusted images to QEMU is a good idea in general --- there's so much that could go wrong. How hardened against abuse are out block drivers?
Quoted 5 lines
Quoted 2 lines
I figure what distinguishes this case is how utterly trivial creating a "bad" image is.
Consider that you can already create a qcow2 image with a backing file of
/etc/shadow.If you cannot access this file, then it should just be an error and not crash qemu.
Quoted 7 lines
If you can access this file, that's your own fault for bad permissions.
Quoted 2 lines
Or create a qcow2 image many EB in size that causes QEMU to allocate massive amounts of RAM and/or burn CPU time, and so on.
That would be the qcow2 driver's fault. We do try to open only images which are sane.
The defintion of "sane" is quite hard though, as its contextual. There are things that are sane when viewed from QEMU level, which can none the less be considered a security bug from the mgmt app level. CPU/memory usage associated with huge images is in this bucket I think, given how enourmous some disk images can genuinely be.
Quoted 4 lines
And memory allocation failures should be handled gracefully, so the VM shouldn't crash. Well, at least qcow2 does its best, what Linux makes of it, who knows. (e.g. it may assign the memory to qemu and then the OOM killer may crash it later)
Yep, you'll quite likely succeed and trigger the OOM killer, or alternatively succeed and push other running VMs out to swap effectively inflicting a denial of service on them.
Quoted 15 lines
Quoted 15 lines
IOW, mgmt apps should never pass untrusted images to QEMU. Crashing is just one of many bad things, and probably not the worst that can happen.
They need to do validation upfront in some manner if receiving an untrustworthy image. Openstack does this by running qemu-img, with limits set on virutal memory size, CPU time, and then rejecting any image with a backing file from being used at all.
Quoted 3 lines
Anyway, you are the block layer maintainers, so you get to decide whether to give this the full security bug treatment. I'm merely the clown who broke it %-/
Accepting an image with any backing file at all from an untrusted user would be a flaw in the layered management app itself, not QEMU.
Quoted 7 lines
Quoted 3 lines
So I think it would only be considered a security bug in QEMU if there was a way for an unprivileged user to trick QEMU into writing malformed JSON into an otherwise trusted image.
Not making it a security bug makes me happy, of course, but I don't quite agree that qemu is not to blame if you pass it some image which makes it crash.
Certainly QEMU should never crash on any input. I just think that wrt untrustworthy disk images, you need security protection well before you get to a live QEMU VM process, so I think this can be just a "normal" bug.
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Quoted 125 lines · Daniel P. Berrangé
Quoted 110 lines · Max Reitz
Quoted 100 lines · Daniel P. Berrangé
Quoted 99 lines · Markus Armbruster
Quoted 81 lines · Max Reitz
Quoted 80 lines · Markus Armbruster
Copying block maintainers for help with assessing the bug's (non-)impact on security.
Quoted 21 lines · Christophe Fergeau
Quoted 11 lines · Markus Armbruster
Quoted 9 lines · Eric Blake
Quoted 1 line · Christophe Fergeau
Adding Markus to cc: list, I forgot to do it when sending the patch.
Also worth backporting via qemu-stable, now in cc.
Quoted 4 lines
Christophe
On Wed, Jan 02, 2019 at 03:05:35PM +0100, Christophe Fergeau wrote:
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
commit
8bca4613added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.Impact?
If you're unable to assess, could you give us at least a reproducer?
Quoted 8 lines
This all came from https://lists.freedesktop.org/archives/spice-devel/2018-December/046644.html
Setting up a VM with libvirt with <graphics type='spice' autoport='yes' passwd='password%'/> fails to start with:
qemu-system-x86_64:qobject/json-parser.c:146:parse_string: Assertion `*ptr' failed.If you use 'password%%' as the password instead, when trying to connect to the VM, you type 'password%' as the password instead of 'password%%' as configured in the domain XML.
Thanks.
As the commit message says, the bug bites when we parse a string containing '%s' with !ctxt->ap. The parser then swallows a character. If it swallows the terminating '"', it fails the assertion.
We parse with !ctxt->ap in the following cases:
* Tests (
tests/check-qjson.c,tests/test-qobject-input-visitor.c,tests/test-visitor-serialization.c)Plenty of tests, but we still failed to cover the buggy case :(
* QMP input (
monitor.c)* QGA input (
qga/main.c)*
qobject_from_json()- JSON pseudo-filenames (
block.c)These are pseudo-filenames starting with "json:".
- JSON key pairs (
block/rbd.c)As far as I can tell, these can come only from pseudo-filenames starting with "rbd:".
- JSON command line option arguments of -display and -blockdev
(qobject-input-visitor.c) Reproducer: -blockdev '{"%"}'Command line, QMP and QGA input are trusted.
Filenames are trusted when they come from command line, QMP or HMP. They are untrusted when they come from from image file headers.
Example: QCOW2 backing file name. Note that this is *not* the security boundary between host and guest. It's the boundary between host and an image file from an untrusted source.I can't see how the bug could be exploited. Neither failing an assertion nor skipping a character in a filename of your choice is interesting. We don't support compiling with NDEBUG.
Quoted 6 lines
Quoted 1 line
Kevin, Max, do you agree?
I wouldn't call it "not interesting" if adding an image to your VM at runtime can crash the whole thing.
(qemu-img create -f qcow2 -u -b 'json:{"%"}' foo.qcow2 64M)
"Not interesting" strictly from the point of view of exploiting the bug to penetrate trust boundaries.
Quoted 1 line
Whether this is a security issue... I don't know, but it is a DoS.
I'm not sure whether feeding untrusted images to QEMU is a good idea in general --- there's so much that could go wrong. How hardened against abuse are out block drivers?
Quoted 5 lines
Quoted 2 lines
I figure what distinguishes this case is how utterly trivial creating a "bad" image is.
Consider that you can already create a qcow2 image with a backing file of
/etc/shadow.If you cannot access this file, then it should just be an error and not crash qemu.
Quoted 7 lines
If you can access this file, that's your own fault for bad permissions.
Quoted 2 lines
Or create a qcow2 image many EB in size that causes QEMU to allocate massive amounts of RAM and/or burn CPU time, and so on.
That would be the qcow2 driver's fault. We do try to open only images which are sane.
The defintion of "sane" is quite hard though, as its contextual. There are things that are sane when viewed from QEMU level, which can none the less be considered a security bug from the mgmt app level. CPU/memory usage associated with huge images is in this bucket I think, given how enourmous some disk images can genuinely be.
Quoted 31 lines
Quoted 4 lines
And memory allocation failures should be handled gracefully, so the VM shouldn't crash. Well, at least qcow2 does its best, what Linux makes of it, who knows. (e.g. it may assign the memory to qemu and then the OOM killer may crash it later)
Yep, you'll quite likely succeed and trigger the OOM killer, or alternatively succeed and push other running VMs out to swap effectively inflicting a denial of service on them.
Quoted 22 lines
Quoted 12 lines
IOW, mgmt apps should never pass untrusted images to QEMU. Crashing is just one of many bad things, and probably not the worst that can happen.
They need to do validation upfront in some manner if receiving an untrustworthy image. Openstack does this by running qemu-img, with limits set on virutal memory size, CPU time, and then rejecting any image with a backing file from being used at all.
Quoted 3 lines
Anyway, you are the block layer maintainers, so you get to decide whether to give this the full security bug treatment. I'm merely the clown who broke it %-/
Quoted 6 lines
Accepting an image with any backing file at all from an untrusted user would be a flaw in the layered management app itself, not QEMU.
So I think it would only be considered a security bug in QEMU if there was a way for an unprivileged user to trick QEMU into writing malformed JSON into an otherwise trusted image.
Not making it a security bug makes me happy, of course, but I don't quite agree that qemu is not to blame if you pass it some image which makes it crash.
No argument, it's definitely a bug. What we've been debating (as far as I'm concerned) is whether it's an exploitable security hole. I don't think it is, and it sounds like nobody really disagrees.
The ability to run random crap downloaded from the internet as root with SELinux turned off is not a security hole. It's to be filed under "don't do that". Likewise, the ability to make a virtual machine abort() by feeding it untrusted images is not a security hole, it's a "don't do that".
Quoted 3 lines
Certainly QEMU should never crash on any input. I just think that wrt untrustworthy disk images, you need security protection well before you get to a live QEMU VM process, so I think this can be just a "normal" bug.
Concur.
Quoted 11 lines · Markus Armbruster
Quoted 9 lines · Eric Blake
Quoted 1 line · Christophe Fergeau
Adding Markus to cc: list, I forgot to do it when sending the patch.
Also worth backporting via qemu-stable, now in cc.
Quoted 4 lines
Christophe
On Wed, Jan 02, 2019 at 03:05:35PM +0100, Christophe Fergeau wrote:
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
commit
8bca4613added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.Impact?
If you're unable to assess, could you give us at least a reproducer?
This affects the block/curl.c driver. Here's a simple reproducer:
https://bugzilla.redhat.com/show_bug.cgi?id=1668244#c3
Rich.
Signature · 5 lines
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com Fedora Windows cross-compiler. Compile Windows programs, test, and build Windows installers. Over 100 libraries supported. http://fedoraproject.org/wiki/MinGW
Quoted 27 lines · Markus Armbruster
Quoted 13 lines · Eric Blake
Quoted 1 line · Christophe Fergeau
Adding Markus to cc: list, I forgot to do it when sending the patch.
Also worth backporting via qemu-stable, now in cc.
Quoted 8 lines
Christophe
Quoted 4 lines · Christophe Fergeau
commit
8bca4613added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.Impact?
If you're unable to assess, could you give us at least a reproducer?
Quoted 7 lines
Quoted 6 lines
Quoted 6 lines
Signed-off-by Christophe Fergeau <[email protected]>--- qobject/json-parser.c | 10 ++++++---- tests/check-qjson.c | 5 +++++ 2 files changed, 11 insertions(+), 4 deletions(-)
Quoted 3 lines
Quoted 1 line
Reviewed-by Eric Blake <[email protected]>Patch looks good to me, but I'd like us to improve the commit message.
Let me try:
json: Fix % handling when not interpolating
Commit 8bca4613 added support for %% in json strings when interpolating, but in doing so broke handling of % when not interpolating.
When parse_string() is fed a string token containing '%', it skips the '%' regardless of ctxt->ap, i.e. even it's not interpolating. If the '%' is the string's last character, it fails an assertion. Else, it "merely" swallows the '%'.
Fix parse_string() to handle '%' specially only when interpolating.
To gauge the bug's impact, let's review non-interpolating users of this parser, i.e. code passing NULL context to json_message_parser_init():
* tests/check-qjson.c, tests/test-qobject-input-visitor.c, tests/test-visitor-serialization.c
Plenty of tests, but we still failed to cover the buggy case.
* monitor.c: QMP input
* qga/main.c: QGA input
* qobject_from_json():
- qobject-input-visitor.c: JSON command line option arguments of -display and -blockdev
Reproducer: -blockdev '{"%"}'
- block.c: JSON pseudo-filenames starting with "json:"
Reproducer: https://bugzilla.redhat.com/show_bug.cgi?id=1668244#c3
- block/rbd.c: JSON key pairs
Pseudo-filenames starting with "rbd:".
Command line, QMP and QGA input are trusted.
Filenames are trusted when they come from command line, QMP or HMP. They are untrusted when they come from from image file headers.
Example: QCOW2 backing file name. Note that this is *not* the security boundary between host and guest. It's the boundary between host and an image file from an untrusted source.
Neither failing an assertion nor skipping a character in a filename of your choice looks exploitable. Note that we don't support compiling with NDEBUG.
Comments?
Hey,
Quoted 82 lines · Markus Armbruster
Quoted 27 lines · Markus Armbruster
Quoted 13 lines · Eric Blake
Quoted 1 line · Christophe Fergeau
Adding Markus to cc: list, I forgot to do it when sending the patch.
Also worth backporting via qemu-stable, now in cc.
Quoted 8 lines
Christophe
Quoted 4 lines · Christophe Fergeau
commit
8bca4613added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.Impact?
If you're unable to assess, could you give us at least a reproducer?
Quoted 7 lines
Quoted 6 lines
Quoted 6 lines
Signed-off-by Christophe Fergeau <[email protected]>--- qobject/json-parser.c | 10 ++++++---- tests/check-qjson.c | 5 +++++ 2 files changed, 11 insertions(+), 4 deletions(-)Quoted 3 lines
Quoted 1 line
Reviewed-by Eric Blake <[email protected]>Patch looks good to me, but I'd like us to improve the commit message.
Let me try:
json: Fix % handling when not interpolating
Commit
8bca4613added support for %% in json strings when interpolating, but in doing so broke handling of % when not interpolating.When
parse_string()is fed a string token containing '%', it skips the '%' regardless ofctxt->ap, i.e. even it's not interpolating. If the '%' is the string's last character, it fails an assertion. Else, it "merely" swallows the '%'.Fix
parse_string()to handle '%' specially only when interpolating.To gauge the bug's impact, let's review non-interpolating users of this parser, i.e. code passing NULL context to
json_message_parser_init():*
tests/check-qjson.c,tests/test-qobject-input-visitor.c,tests/test-visitor-serialization.cPlenty of tests, but we still failed to cover the buggy case.
*
monitor.c: QMP input*
qga/main.c: QGA input*
qobject_from_json():-
qobject-input-visitor.c: JSON command line option arguments of -display and -blockdevReproducer: -blockdev '{"%"}'
-
block.c: JSON pseudo-filenames starting with "json:"Reproducer: https://bugzilla.redhat.com/show_bug.cgi?id=1668244#c3
-
block/rbd.c: JSON key pairsPseudo-filenames starting with "rbd:".
Command line, QMP and QGA input are trusted.
Filenames are trusted when they come from command line, QMP or HMP. They are untrusted when they come from from image file headers.
Example: QCOW2 backing file name. Note that this is *not* the security boundary between host and guest. It's the boundary between host and an image file from an untrusted source.
Quoted 8 lines
Neither failing an assertion nor skipping a character in a filename of your choice looks exploitable. Note that we don't support compiling with NDEBUG.
Fixes 8bca4613e6cddd948895b8db3def05950463495bComments?
This looks good to me, thanks for the expanded log!
Christophe
Quoted 19 lines · Markus Armbruster
To gauge the bug's impact, let's review non-interpolating users of this parser, i.e. code passing NULL context to
json_message_parser_init():*
tests/check-qjson.c,tests/test-qobject-input-visitor.c,tests/test-visitor-serialization.cPlenty of tests, but we still failed to cover the buggy case.
*
monitor.c: QMP input*
qga/main.c: QGA input*
qobject_from_json():-
qobject-input-visitor.c: JSON command line option arguments of -display and -blockdevReproducer: -blockdev '{"%"}'
Quoted 8 lines
-
block.c: JSON pseudo-filenames starting with "json:"Reproducer: https://bugzilla.redhat.com/show_bug.cgi?id=1668244#c3
-
block/rbd.c: JSON key pairsPseudo-filenames starting with "rbd:".
Missed curl as being impacted. You'd have to do a v2 pull request to mention it now...
https://bugzilla.redhat.com/show_bug.cgi?id=1668244
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org
Quoted 27 lines · Eric Blake
Quoted 25 lines · Markus Armbruster
To gauge the bug's impact, let's review non-interpolating users of this parser, i.e. code passing NULL context to
json_message_parser_init():*
tests/check-qjson.c,tests/test-qobject-input-visitor.c,tests/test-visitor-serialization.cPlenty of tests, but we still failed to cover the buggy case.
*
monitor.c: QMP input*
qga/main.c: QGA input*
qobject_from_json():-
qobject-input-visitor.c: JSON command line option arguments of -display and -blockdevReproducer: -blockdev '{"%"}'
-
block.c: JSON pseudo-filenames starting with "json:"Reproducer: https://bugzilla.redhat.com/show_bug.cgi?id=1668244#c3
-
block/rbd.c: JSON key pairs
Quoted 7 lines
Quoted 2 lines
Pseudo-filenames starting with "rbd:".
Missed curl as being impacted. You'd have to do a v2 pull request to mention it now...
Isn't that an instance of 'JSON pseudo-filenames starting with "json:"'?
Quoted 9 lines · Markus Armbruster
Quoted 9 lines
Quoted 8 lines
-
block.c: JSON pseudo-filenames starting with "json:"Reproducer: https://bugzilla.redhat.com/show_bug.cgi?id=1668244#c3
-
block/rbd.c: JSON key pairsPseudo-filenames starting with "rbd:".
Quoted 6 lines
Quoted 4 lines
Missed curl as being impacted. You'd have to do a v2 pull request to mention it now...
Isn't that an instance of 'JSON pseudo-filenames starting with "json:"'?
Indeed - and I even linked to the same BZ without realizing it. Nothing further to see here, I'll go back to hiding in the corner...
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org
Quoted 39 lines · Christophe Fergeau
commit
8bca4613added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.Signed-off-by Christophe Fergeau <[email protected]>--- qobject/json-parser.c | 10 ++++++---- tests/check-qjson.c | 5 +++++ 2 files changed, 11 insertions(+), 4 deletions(-)qobject/json-parser.c +6
-4@@ -208,11 +208,13 @@ static QString *parse_string(JSONParserContext *ctxt, JSONToken *token) }break ;case '%' : -if (ctxt->ap && ptr[1 ] !='%' ) { -parse_error (ctxt, token,"can't interpolate into string" ); - goto out; +if (ctxt->ap) { +if (ptr[1 ] !='%' ) { +parse_error (ctxt, token,"can't interpolate into string" ); + goto out; + } + ptr++; } - ptr++;/* fall through */ default : cp =mod_utf8_codepoint (ptr,6 , &end);tests/check-qjson.c +0
-0@@ -175,6 +175,11 @@ static void utf8_string(void) "\xCE\xBA\xE1\xBD\xB9\xCF\x83\xCE\xBC\xCE\xB5",
tests/check-qjson.c static void utf8_string(void) · line 185
Quoted 10 lines
tests/check-qjson.c +5
-0"\xCE\xBA\xE1\xBD\xB9\xCF\x83\xCE\xBC\xCE\xB5" ,"\\u03BA\\u1F79\\u03C3\\u03BC\\u03B5" , + }, + /* '%' character when not interpolating */ + { +"100%" , + "100%", },/* 2 Boundary condition test cases */ /* 2.1 First possible sequence of a certain length */
as a fix for: https://bugzilla.redhat.com/show_bug.cgi?id=1668244#c3
Rich.
Signature · 5 lines
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com virt-top is 'top' for virtual machines. Tiny program with many powerful monitoring features, net stats, disk stats, logging, etc. http://people.redhat.com/~rjones/virt-top
Markus Armbruster
AppliedQuoted 6 lines · Christophe Fergeau
commit
8bca4613added support for %% in json strings when interpolating, but in doing so, this broke handling of % when not interpolating as the '%' is skipped in both cases.
This commit ensures we only try to handle %% when interpolating.Signed-off-by Christophe Fergeau <[email protected]>
Queued with commit message improvements, thanks!