Skip to contentSkip to conversation

ASoC: tlv320aic32x4: SND_SOC_DAPM_MICBIAS is deprecated

PATCH In review b-ak 2 participants 4 messages Jan 9, 2019

Subsystems (3)
lore
Share & tools
lore

b-ak

author
#0 lore raw

PATCH 1/1 ASoC: tlv320aic32x4: SND_SOC_DAPM_MICBIAS is deprecated

SND_SOC_DAPM_MICBIAS is deprecated, replace it with SND_SOC_DAPM_SUPPLY.

MICBIAS voltage wasn't supplied to the microphone with the older SND_SOC_DAPM_MICBIAS widget, hence the microphone wouldn't work.

This patch fixes the problem.

---
 sound/soc/codecs/tlv320aic32x4.c | 30 +++++++++++++++++++++++++++++-
 sound/soc/codecs/tlv320aic32x4.h |  1 +
 2 files changed, 30 insertions(+), 1 deletion(-)
sound/soc/codecs/tlv320aic32x4.c +29 -1
index e2b5a11b16d1..521663d8b585 100644
@@ -79,6 +79,32 @@ struct aic32x4_priv {
 	struct device *dev;
 };
 
+static int mic_bias_event(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		/* Change Mic Bias Registor */
+		snd_soc_component_update_bits(component, AIC32X4_MICBIAS,
+				AIC32x4_MICBIAS_MASK,
+				AIC32X4_MICBIAS_LDOIN |
+				AIC32X4_MICBIAS_2075V);
+		printk(KERN_DEBUG "%s: Mic Bias will be turned ON\n", __func__);
+		break;
+	case SND_SOC_DAPM_PRE_PMD:
+		snd_soc_component_update_bits(component, AIC32X4_MICBIAS,
+				AIC32x4_MICBIAS_MASK, 0);
+		printk(KERN_DEBUG "%s: Mic Bias will be turned OFF\n",
+				__func__);
+		break;
+	}
+
+	return 0;
+}
+
+
 static int aic32x4_get_mfp1_gpio(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol)
 {
@@ -450,7 +476,9 @@ static const struct snd_soc_dapm_widget aic32x4_dapm_widgets[] = {
 	SND_SOC_DAPM_MUX("IN3_R to Left Mixer Negative Resistor", SND_SOC_NOPM, 0, 0,
 			in3r_to_lmixer_controls),
 
-	SND_SOC_DAPM_MICBIAS("Mic Bias", AIC32X4_MICBIAS, 6, 0),
+	SND_SOC_DAPM_SUPPLY("Mic Bias", AIC32X4_MICBIAS, 6, 0, mic_bias_event,
+			SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+
 
 	SND_SOC_DAPM_OUTPUT("HPL"),
 	SND_SOC_DAPM_OUTPUT("HPR"),
sound/soc/codecs/tlv320aic32x4.h +1 -0
index e9df49edbf19..c2d74025bf4b 100644
@@ -195,6 +195,7 @@ int aic32x4_remove(struct device *dev);
 /* AIC32X4_MICBIAS */
 #define AIC32X4_MICBIAS_LDOIN		BIT(3)
 #define AIC32X4_MICBIAS_2075V		0x60
+#define AIC32x4_MICBIAS_MASK            GENMASK(6, 3)
 
 /* AIC32X4_LMICPGANIN */
 #define AIC32X4_LMICPGANIN_IN2R_10K	0x10
Signature · 1 line
2.19.1
maintainer
#1 lore raw
Quoted 6 lines · b-ak

SND_SOC_DAPM_MICBIAS is deprecated, replace it with SND_SOC_DAPM_SUPPLY.

MICBIAS voltage wasn't supplied to the microphone with the older SND_SOC_DAPM_MICBIAS widget, hence the microphone wouldn't work.

This patch fixes the problem.

Note that the reason we've not done that already for everything is that the DAPM graph needs updating for the new routing in machine drivers as the two widgets are wired differently. However this is fine here as there aren't any in tree users I can see so I'll apply, thanks!

author
#2 lore raw
Quoted 6 lines · Mark Brown
Quoted 5 lines · b-ak

SND_SOC_DAPM_MICBIAS is deprecated, replace it with SND_SOC_DAPM_SUPPLY.

MICBIAS voltage wasn't supplied to the microphone with the older SND_SOC_DAPM_MICBIAS widget, hence the microphone wouldn't work.

Quoted 6 lines
Quoted 1 line

This patch fixes the problem.

Note that the reason we've not done that already for everything is that the DAPM graph needs updating for the new routing in machine drivers as the two widgets are wired differently. However this is fine here as there aren't any in tree users I can see so I'll apply, thanks!

Hello Mark,

Thank you so much for that.

And can you please point me to some documentation of the new updates talking about the differences in the routing?

- Bhargav

maintainer
#3 lore raw
Quoted 7 lines · b-ak
Quoted 4 lines

Note that the reason we've not done that already for everything is that the DAPM graph needs updating for the new routing in machine drivers as the two widgets are wired differently. However this is fine here as there aren't any in tree users I can see so I'll apply, thanks!

And can you please point me to some documentation of the new updates talking about the differences in the routing?

Can't think of a specific doc about the transition but there are a bunch of existing conversions like this:

2ca087bc9edafd7cd1e89d0ac61a31067985bd15 ASoC: rx51: Correct DAPM route for capture