8250_omap: use clk APIs to get fclk freqeuncy
Subsystems (2)
cover 8250_omap: use clk APIs to get fclk freqeuncy
This series adds support obtain clk frequency of functional clk via clocks phandle instead of hard coding it in DT as part of clock-frequency DT parameter. This eliminates need to calculate frequency offline and populate it.
Vignesh R (3):
serial: 8250_omap: Drop check for of_node
dt-bindings: serial: omap_serial: add clocks entry
serial: 8250_omap: Use clk_get_rate() to obtain fclk frequency
.../bindings/serial/omap_serial.txt | 2 + drivers/tty/serial/8250/8250_omap.c | 75 ++++++++++--------- 2 files changed, 42 insertions(+), 35 deletions(-)
Signature · 1 line
2.20.1
PATCH 1/3 serial: 8250_omap: Drop check for of_node
8250_omap is DT only driver so dev->of_node always exists. Drop check for existence of valid dev->of_node to simplify omap8250_probe().
--- drivers/tty/serial/8250/8250_omap.c | 63 +++++++++++++---------------- 1 file changed, 28 insertions(+), 35 deletions(-)
drivers/tty/serial/8250/8250_omap.c +28 -35
@@ -1134,10 +1134,12 @@ static int omap8250_probe(struct platform_device *pdev) {struct resource *regs =platform_get_resource (pdev,IORESOURCE_MEM ,0 );struct resource *irq =platform_get_resource (pdev,IORESOURCE_IRQ ,0 ); +struct device_node *np = pdev->dev.of_node;struct omap8250_priv *priv;struct uart_8250_port up;int ret;void __iomem *membase; +const struct of_device_id *id;if (!regs || !irq) {dev_err (&pdev->dev,"missing registers or irq\n" );
@@ -1194,27 +1196,20 @@ static int omap8250_probe(struct platform_device *pdev) up.port.unthrottle = omap_8250_unthrottle; up.port.rs485_config = omap_8250_rs485_config; -if (pdev->dev.of_node) { -const struct of_device_id *id; - - ret =of_alias_get_id (pdev->dev.of_node,"serial" ); - -of_property_read_u32 (pdev->dev.of_node,"clock-frequency" , - &up.port.uartclk); - priv->wakeirq =irq_of_parse_and_map (pdev->dev.of_node,1 ); - - id =of_match_device (of_match_ptr (omap8250_dt_ids), &pdev->dev); -if (id && id->data) - priv->habit |= *(u8 *)id->data; - }else { - ret = pdev->id; - } + ret =of_alias_get_id (np,"serial" );if (ret <0 ) { -dev_err (&pdev->dev,"failed to get alias/pdev id\n" ); +dev_err (&pdev->dev,"failed to get alias\n" );return ret; } up.port.line = ret; +of_property_read_u32 (np,"clock-frequency" , &up.port.uartclk); + priv->wakeirq =irq_of_parse_and_map (np,1 ); + + id =of_match_device (of_match_ptr (omap8250_dt_ids), &pdev->dev); +if (id && id->data) + priv->habit |= *(u8 *)id->data; +if (!up.port.uartclk) { up.port.uartclk =DEFAULT_CLK_SPEED ; dev_warn(&pdev->dev,
@@ -1242,25 +1237,23 @@ static int omap8250_probe(struct platform_device *pdev)omap_serial_fill_features_erratas (&up, priv); up.port.handle_irq = omap8250_no_handle_irq;#ifdef CONFIG_SERIAL_8250_DMA -if (pdev->dev.of_node) { -/* -* Oh DMA support. If there are no DMA properties in the DT then -* we will fall back to a generic DMA channel which does not -* really work here. To ensure that we do not get a generic DMA -* channel assigned, we have the the_no_dma_filter_fn() here. -* To avoid "failed to request DMA" messages we check for DMA -* properties in DT. -*/ - ret =of_property_count_strings (pdev->dev.of_node,"dma-names" ); -if (ret ==2 ) { - up.dma = &priv->omap8250_dma; - priv->omap8250_dma.fn = the_no_dma_filter_fn; - priv->omap8250_dma.tx_dma = omap_8250_tx_dma; - priv->omap8250_dma.rx_dma = omap_8250_rx_dma; - priv->omap8250_dma.rx_size =RX_TRIGGER ; - priv->omap8250_dma.rxconf.src_maxburst =RX_TRIGGER ; - priv->omap8250_dma.txconf.dst_maxburst =TX_TRIGGER ; - } +/* +* Oh DMA support. If there are no DMA properties in the DT then +* we will fall back to a generic DMA channel which does not +* really work here. To ensure that we do not get a generic DMA +* channel assigned, we have the the_no_dma_filter_fn() here. +* To avoid "failed to request DMA" messages we check for DMA +* properties in DT. +*/ + ret =of_property_count_strings (np,"dma-names" ); +if (ret ==2 ) { + up.dma = &priv->omap8250_dma; + priv->omap8250_dma.fn = the_no_dma_filter_fn; + priv->omap8250_dma.tx_dma = omap_8250_tx_dma; + priv->omap8250_dma.rx_dma = omap_8250_rx_dma; + priv->omap8250_dma.rx_size =RX_TRIGGER ; + priv->omap8250_dma.rxconf.src_maxburst =RX_TRIGGER ; + priv->omap8250_dma.txconf.dst_maxburst =TX_TRIGGER ; }#endif ret =serial8250_register_8250_port (&up);
Signature · 1 line
2.20.1
Re: [PATCH 1/3] serial: 8250_omap: Drop check for of_node
Quoted 2 lines · Vignesh R
8250_omap is DT only driver so
dev->of_nodealways exists. Drop check for existence of validdev->of_nodeto simplifyomap8250_probe().
That part seems safe to me now.
Quoted 2 lines
drivers/tty/serial/8250/8250_omap.c +0
-0
...
drivers/tty/serial/8250/8250_omap.c static int omap8250_probe(struct platform_device *pdev) · line 1208
Quoted 11 lines
drivers/tty/serial/8250/8250_omap.c +0
-11-const struct of_device_id *id; - - ret =of_alias_get_id (pdev->dev.of_node,"serial" ); - -of_property_read_u32 (pdev->dev.of_node,"clock-frequency" , - &up.port.uartclk); - priv->wakeirq =irq_of_parse_and_map (pdev->dev.of_node,1 ); - - id =of_match_device (of_match_ptr (omap8250_dt_ids), &pdev->dev); -if (id && id->data) - priv->habit |= *(u8 *)id->data;
But this part it seems we still need to keep around as we still have lots of clock-frequency references in the *.dtsi files. Or am I missing something?
Regards
Tony
Re: [PATCH 1/3] serial: 8250_omap: Drop check for of_node
Hi,
Quoted 9 lines · Tony Lindgren
Quoted 2 lines · Vignesh R
8250_omap is DT only driver so
dev->of_nodealways exists. Drop check for existence of validdev->of_nodeto simplifyomap8250_probe().That part seems safe to me now.
Quoted 2 lines
drivers/tty/serial/8250/8250_omap.c +0
-0...
Quoted 15 lines
drivers/tty/serial/8250/8250_omap.c static int omap8250_probe(struct platform_device *pdev) · line 1208
Quoted 11 lines
drivers/tty/serial/8250/8250_omap.c +0
-11-const struct of_device_id *id; - - ret =of_alias_get_id (pdev->dev.of_node,"serial" ); - -of_property_read_u32 (pdev->dev.of_node,"clock-frequency" , - &up.port.uartclk); - priv->wakeirq =irq_of_parse_and_map (pdev->dev.of_node,1 ); - - id =of_match_device (of_match_ptr (omap8250_dt_ids), &pdev->dev); -if (id && id->data) - priv->habit |= *(u8 *)id->data;But this part it seems we still need to keep around as we still have lots of clock-frequency references in the *.dtsi files. Or am I missing something?
It's re-added a couple of lines later. Only the indent was removed.
-- Sebastian
Re: [PATCH 1/3] serial: 8250_omap: Drop check for of_node
Quoted 28 lines · Sebastian Reichel
Hi,
Quoted 9 lines · Tony Lindgren
Quoted 2 lines · Vignesh R
8250_omap is DT only driver so
dev->of_nodealways exists. Drop check for existence of validdev->of_nodeto simplifyomap8250_probe().That part seems safe to me now.
Quoted 2 lines
drivers/tty/serial/8250/8250_omap.c +0
-0...
Quoted 15 lines
drivers/tty/serial/8250/8250_omap.c static int omap8250_probe(struct platform_device *pdev) · line 1208
Quoted 11 lines
drivers/tty/serial/8250/8250_omap.c +0
-11-const struct of_device_id *id; - - ret =of_alias_get_id (pdev->dev.of_node,"serial" ); - -of_property_read_u32 (pdev->dev.of_node,"clock-frequency" , - &up.port.uartclk); - priv->wakeirq =irq_of_parse_and_map (pdev->dev.of_node,1 ); - - id =of_match_device (of_match_ptr (omap8250_dt_ids), &pdev->dev); -if (id && id->data) - priv->habit |= *(u8 *)id->data;But this part it seems we still need to keep around as we still have lots of clock-frequency references in the *.dtsi files. Or am I missing something?
Quoted 2 lines
It's re-added a couple of lines later. Only the indent was removed.
That's right. You beat me to it. Thanks :)
Regards
Vignesh
Re: [PATCH 1/3] serial: 8250_omap: Drop check for of_node
Quoted 30 lines · Vignesh R
Quoted 28 lines · Sebastian Reichel
Hi,
Quoted 24 lines · Tony Lindgren
Quoted 2 lines · Vignesh R
8250_omap is DT only driver so
dev->of_nodealways exists. Drop check for existence of validdev->of_nodeto simplifyomap8250_probe().That part seems safe to me now.
Quoted 2 lines
drivers/tty/serial/8250/8250_omap.c +0
-0...
drivers/tty/serial/8250/8250_omap.c static int omap8250_probe(struct platform_device *pdev) · line 1208
Quoted 11 lines
drivers/tty/serial/8250/8250_omap.c +0
-11-const struct of_device_id *id; - - ret =of_alias_get_id (pdev->dev.of_node,"serial" ); - -of_property_read_u32 (pdev->dev.of_node,"clock-frequency" , - &up.port.uartclk); - priv->wakeirq =irq_of_parse_and_map (pdev->dev.of_node,1 ); - - id =of_match_device (of_match_ptr (omap8250_dt_ids), &pdev->dev); -if (id && id->data) - priv->habit |= *(u8 *)id->data;But this part it seems we still need to keep around as we still have lots of clock-frequency references in the *.dtsi files. Or am I missing something?
Quoted 4 lines
Quoted 2 lines
It's re-added a couple of lines later. Only the indent was removed.
That's right. You beat me to it. Thanks :)
Oh right, sorry I missed that :)
Regards,
Tony
PATCH 2/3 dt-bindings: serial: omap_serial: add clocks entry
In reply to Vignesh RDocument clocks property used to pass phandle to functional clk.
--- Documentation/devicetree/bindings/serial/omap_serial.txt | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/serial/omap_serial.txt +2 -0
@@ -22,6 +22,8 @@ Optional properties: - dma-names : "rx" for receive channel, "tx" for transmit channel. - rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt - rs485-rts-active-high: drive RTS high when sending (default is low). +- clocks: phandle to the functional clock as per + Documentation/devicetree/bindings/clock/clock-bindings.txt Example:
Signature · 1 line
2.20.1
Re: [PATCH 2/3] dt-bindings: serial: omap_serial: add clocks entry
Quoted 7 lines · Vignesh R
Document clocks property used to pass phandle to functional clk.
Signed-off-by Vignesh R <[email protected]>--- Documentation/devicetree/bindings/serial/omap_serial.txt | 2 ++ 1 file changed, 2 insertions(+)
PATCH 3/3 serial: 8250_omap: Use clk_get_rate() to obtain fclk frequency
In reply to Vignesh R8250_omap driver uses clock-frequency DT property to obtain functional clk frequency. This is not ideal as users need to calculate functional clk frequency offline and populate it in DT.
Therefore add support to obtain functional clock frequency using clk APIs when clock-frequency DT property is not defined.
--- drivers/tty/serial/8250/8250_omap.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)
drivers/tty/serial/8250/8250_omap.c +13 -1
@@ -12,6 +12,7 @@#define SUPPORT_SYSRQ #endif +#include <linux/clk.h> #include <linux/device.h> #include <linux/io.h> #include <linux/module.h>
@@ -1203,7 +1204,18 @@ static int omap8250_probe(struct platform_device *pdev) } up.port.line = ret; -of_property_read_u32 (np,"clock-frequency" , &up.port.uartclk); +if (of_property_read_u32 (np,"clock-frequency" , &up.port.uartclk)) { +struct clk *clk; + + clk =devm_clk_get (&pdev->dev,NULL ); +if (IS_ERR (clk)) { +if (PTR_ERR (clk) == -EPROBE_DEFER ) +return -EPROBE_DEFER ; + }else { + up.port.uartclk =clk_get_rate (clk); + } + } + priv->wakeirq =irq_of_parse_and_map (np,1 ); id =of_match_device (of_match_ptr (omap8250_dt_ids), &pdev->dev);
Signature · 1 line
2.20.1