arm: sunxi: Enable SPL/SPI boot for Olinuxino Lime2-eMMC boards
PATCH 1/1 arm: sunxi: Enable SPL/SPI boot for Olinuxino Lime2-eMMC boards
From: Priit Laes <[email protected]>
Starting from revision K the Olimex-Lime2-eMMC boards include eMMC 5.x chip. Unfortunately, the internal brom in the A20 cannot reliably initialize those chips resulting in random boot failures on those boards.
To overcome this, all the latest Lime2-eMMC boards are populated with 16MB SPI flash and therefore enable support for SPI SPL boot.
For now, SPI flash can be managed using sunxi-fel's spiflash tools.
--- configs/A20-OLinuXino-Lime2-eMMC_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/A20-OLinuXino-Lime2-eMMC_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_SPL=y +CONFIG_SPL_SPI_SUNXI=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 CONFIG_MMC0_CD_PIN="PH1"
Signature · 1 line
2.11.0
PATCH 1/1 arm: sunxi: Enable SPL/SPI boot for Olinuxino Lime2-eMMC boards
Quoted 8 lines · Priit Laes
From: Priit Laes <[email protected]>
Starting from revision K the Olimex-Lime2-eMMC boards include eMMC 5.x chip. Unfortunately, the internal brom in the A20 cannot reliably initialize those chips resulting in random boot failures on those boards.
Quoted 8 lines
To overcome this, all the latest Lime2-eMMC boards are populated with 16MB SPI flash and therefore enable support for SPI SPL boot.
For now, SPI flash can be managed using sunxi-fel's spiflash tools.
Signed-off-by Priit Laes <[email protected]>---
Applied to u-boot-sunxi/master