staging: vboxvideo: vbox_main: Remove unnecessary local variable
PATCH 1/1 staging: vboxvideo: vbox_main: Remove unnecessary local variable
Removed unnecessary local variable in have_hgsmi_mode_hints. The result of hgsmi_query_conf should be directly compared without assigning to local variable.
--- drivers/staging/vboxvideo/vbox_main.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-)
drivers/staging/vboxvideo/vbox_main.c +6 -9
@@ -170,18 +170,15 @@ static void vbox_accel_fini(struct vbox_private *vbox)static bool have_hgsmi_mode_hints (struct vbox_private *vbox) {u32 have_hints, have_cursor; -int ret; - ret =hgsmi_query_conf (vbox->guest_pool, -VBOX_VBVA_CONF32_MODE_HINT_REPORTING , - &have_hints); -if (ret) +if (hgsmi_query_conf (vbox->guest_pool, +VBOX_VBVA_CONF32_MODE_HINT_REPORTING , + &have_hints))return false; - ret =hgsmi_query_conf (vbox->guest_pool, -VBOX_VBVA_CONF32_GUEST_CURSOR_REPORTING , - &have_cursor); -if (ret) +if (hgsmi_query_conf (vbox->guest_pool, +VBOX_VBVA_CONF32_GUEST_CURSOR_REPORTING , + &have_cursor))return false;return have_hints ==VINF_SUCCESS && have_cursor ==VINF_SUCCESS ;
Signature · 1 line
2.17.1
Quoted 6 lines · Sidong Yang
Removed unnecessary local variable in
have_hgsmi_mode_hints. The result ofhgsmi_query_confshould be directly compared without assigning to local variable.Signed-off-by Sidong Yang <[email protected]>---
I sort of prefer the original...
The hgsmi_query_conf() function returns negative error codes if it can't complete the query because of allocation failures. To me that's more obvious, when we write it in the original way.
In the new code it looks like it returns bool or something. The copy_to/from_user() are normally written like if (copy_to_user()) { but those don't return negative error codes so it's a different situation.
This isn't something in checkpatch or CodingStyle so there isn't a standard. It's just personal opinion vs personal opinion. If you were going to do a lot of vboxvideo development, then it would be your opinion which matters the most because you are doing the work. But this is your first vboxvideo patch...
Let's just leave it as-is.
regards,
dan carpenter
Quoted 10 lines · Dan Carpenter
Quoted 6 lines · Sidong Yang
Removed unnecessary local variable in
have_hgsmi_mode_hints. The result ofhgsmi_query_confshould be directly compared without assigning to local variable.Signed-off-by Sidong Yang <[email protected]>---
I sort of prefer the original...
Quoted 9 lines
The
hgsmi_query_conf()function returns negative error codes if it can't complete the query because of allocation failures. To me that's more obvious, when we write it in the original way.In the new code it looks like it returns bool or something. The copy_to/from_user() are normally written like if (
copy_to_user()) { but those don't return negative error codes so it's a different situation.
Hi, Dan.
I think you just point out that my code isn't obvious because the function returns negative error codes. I agree with you. But what if change my code like if(hgsmi_query_conf() != 0).
Quoted 7 lines
This isn't something in checkpatch or CodingStyle so there isn't a standard. It's just personal opinion vs personal opinion. If you were going to do a lot of vboxvideo development, then it would be your opinion which matters the most because you are doing the work. But this is your first vboxvideo patch...
Let's just leave it as-is.
I agree with this comment. I'm just a newbie for this module and It isn't about checkpatch or CodingStyle. but I just wondered if my code has problem.
regards,
Sidong Yang
Quoted 5 lines
regards,
dan carpenter
Quoted 4 lines · Sidong Yang
I think you just point out that my code isn't obvious because the function returns negative error codes. I agree with you. But what if change my code like
if(hgsmi_query_conf() != 0).
That's even worse! :P
You should do comparisons with zero when you are talking about zero meaning the number zero. In this case, hgsmi_query_conf() returns "zezro meaning success" not "zero meaning the number zero". How many bytes? Zero. That is the number zero.
!= zero is a double negative, because NOT and ZERO are negatives. If double negatives simplified the code we would add four of them instead of just the one:
if ((((hgsmi_query_conf() != 0) != 0) != 0) != 0) {See? Adding != 0 doesn't make it simpler...
The other place where != 0 is appropriate besides talking about the number is when you're using a strcmp() function because it works like this:
if (strcmp(a, b) < 0) { <-- means a < b
if (strcmp(a, b) == 0) { <-- means a == b
if (strcmp(a, b) != 0) { <-- means a != bregards,
dan carpenter
Quoted 25 lines · Dan Carpenter
Quoted 4 lines · Sidong Yang
I think you just point out that my code isn't obvious because the function returns negative error codes. I agree with you. But what if change my code like
if(hgsmi_query_conf() != 0).That's even worse! :P
You should do comparisons with zero when you are talking about zero meaning the number zero. In this case,
hgsmi_query_conf()returns "zezro meaning success" not "zero meaning the number zero". How many bytes? Zero. That is the number zero.!= zero is a double negative, because NOT and ZERO are negatives. If double negatives simplified the code we would add four of them instead of just the one:
if ((((hgsmi_query_conf() != 0) != 0) != 0) != 0) {See? Adding != 0 doesn't make it simpler...
The other place where != 0 is appropriate besides talking about the number is when you're using a
strcmp()function because it works like this:
Quoted 7 lines
if (strcmp(a, b) < 0) { <-- means a < b if (strcmp(a, b) == 0) { <-- means a == b if (strcmp(a, b) != 0) { <-- means a != bregards,
dan carpenter
You're right. that is even worse. I understand and thank you for pointing out.
regards,
Sidong Yang
Greg Kroah-Hartman
maintainerQuoted 17 lines · Sidong Yang
Removed unnecessary local variable in
have_hgsmi_mode_hints. The result ofhgsmi_query_confshould be directly compared without assigning to local variable.Signed-off-by Sidong Yang <[email protected]>--- drivers/staging/vboxvideo/vbox_main.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-)drivers/staging/vboxvideo/vbox_main.c +0
-0@@ -170,18 +170,15 @@ static void vbox_accel_fini(struct vbox_private *vbox)static bool have_hgsmi_mode_hints (struct vbox_private *vbox) {u32 have_hints, have_cursor;
drivers/staging/vboxvideo/vbox_main.c static void vbox_accel_fini(struct vbox_private *vbox) · line 177
Quoted 10 lines
drivers/staging/vboxvideo/vbox_main.c +3
-5-int ret; - ret =hgsmi_query_conf (vbox->guest_pool, -VBOX_VBVA_CONF32_MODE_HINT_REPORTING , - &have_hints); -if (ret) +if (hgsmi_query_conf (vbox->guest_pool, +VBOX_VBVA_CONF32_MODE_HINT_REPORTING , + &have_hints))return false;
As Dan says, the original is best here. I'm dropping this from my patch queue.
thanks,
greg k-h