mmc: fsl_esdhc: Move ifdef to CONFIG_IS_ENABLED
PATCH 1/1 mmc: fsl_esdhc: Move ifdef to CONFIG_IS_ENABLED
For some boards, DM_REGULATOR and DM_GPIO may not be enabled in SPL but enabled in U-Boot. So switching to CONFIG_IS_ENABLED from ifdef allows the esdhc driver to function with some limited functionality in SPL.
drivers/mmc/fsl_esdhc.c +3 -3
@@ -1395,7 +1395,7 @@ static int fsl_esdhc_probe(struct udevice *dev)int node =dev_of_offset (dev);struct esdhc_soc_data *data = (struct esdhc_soc_data *)dev_get_driver_data (dev); -#ifdef CONFIG_DM_REGULATOR +#if CONFIG_IS_ENABLED (DM_REGULATOR )struct udevice *vqmmc_dev;#endif fdt_addr_t addr;
@@ -1436,7 +1436,7 @@ static int fsl_esdhc_probe(struct udevice *dev) priv->non_removable =1 ; }else { priv->non_removable =0 ; -#ifdef CONFIG_DM_GPIO +#if CONFIG_IS_ENABLED (DM_GPIO )gpio_request_by_name (dev,"cd-gpios" ,0 , &priv->cd_gpio,GPIOD_IS_IN );#endif
@@ -1453,7 +1453,7 @@ static int fsl_esdhc_probe(struct udevice *dev) priv->vs18_enable =0 ; -#ifdef CONFIG_DM_REGULATOR +#if CONFIG_IS_ENABLED (DM_REGULATOR )/* * If emmc I/O has a fixed voltage at 1.8V, this must be provided, * otherwise, emmc will work abnormally.
Signature · 1 line
2.17.1
PATCH 1/1 mmc: fsl_esdhc: Move ifdef to CONFIG_IS_ENABLED
Hi Adam,
Quoted 38 lines
For some boards,
DM_REGULATORandDM_GPIOmay not be enabled in SPL but enabled in U-Boot. So switching toCONFIG_IS_ENABLEDfrom ifdef allows the esdhc driver to function with some limited functionality in SPL.Signed-off-by Adam Ford <[email protected]>drivers/mmc/fsl_esdhc.c +3
-3@@ -1395,7 +1395,7 @@ static int fsl_esdhc_probe(struct udevice *dev)int node =dev_of_offset (dev);struct esdhc_soc_data *data = (struct esdhc_soc_data *)dev_get_driver_data (dev); -#ifdef CONFIG_DM_REGULATOR +#if CONFIG_IS_ENABLED (DM_REGULATOR )struct udevice *vqmmc_dev;#endif fdt_addr_t addr;@@ -1436,7 +1436,7 @@ static int fsl_esdhc_probe(struct udevice *dev) priv->non_removable =1 ; }else { priv->non_removable =0 ; -#ifdef CONFIG_DM_GPIO +#if CONFIG_IS_ENABLED (DM_GPIO )gpio_request_by_name (dev,"cd-gpios" ,0 , &priv->cd_gpio,GPIOD_IS_IN );#endif @@ -1453,7 +1453,7 @@ static int fsl_esdhc_probe(struct udevice *dev) priv->vs18_enable =0 ; -#ifdef CONFIG_DM_REGULATOR +#if CONFIG_IS_ENABLED (DM_REGULATOR )/* * If emmc I/O has a fixed voltage at 1.8V, this must be provided,
Quoted 1 line
* otherwise, emmc will work abnormally.
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190110/b5576faa/attachment.sig>