Skip to contentSkip to conversation

gpio: pca953x: reduce indentation level in pca953x_irq_setup()

PATCH In review Thomas Petazzoni 2 participants 4 messages Jan 16, 2019 – Jan 21, 2019 GPIO

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 gpio: pca953x: reduce indentation level in pca953x_irq_setup()

The current design of pca953x_irq_setup() is:

if (all conditions to support IRQ are met) {
lots of code to support IRQs, which goes to a serious indentation level.
}

return 0;

It makes more sense to handle this like this:

if (!all conditions to support IRQ are met)
return 0;

handle IRQ support

This commit does just this change, reducing by one tab the indentation level of the IRQ setup code. Thanks to this reduced indentation level, we are less restricted by the 80-column limit, and we can have more function arguments on the same line.

---
 drivers/gpio/gpio-pca953x.c | 84 ++++++++++++++++++-------------------
 1 file changed, 42 insertions(+), 42 deletions(-)
drivers/gpio/gpio-pca953x.c +42 -42
index 0dc96419efe3..4f91ce497dd1 100644
@@ -702,53 +702,53 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
 	int reg_direction[MAX_BANK];
 	int ret, i;
 
-	if (client->irq && irq_base != -1
-			&& (chip->driver_data & PCA_INT)) {
-		ret = pca953x_read_regs(chip,
-					chip->regs->input, chip->irq_stat);
-		if (ret)
-			return ret;
+	if (!client->irq)
+		return 0;
 
-		/*
-		 * There is no way to know which GPIO line generated the
-		 * interrupt.  We have to rely on the previous read for
-		 * this purpose.
-		 */
-		regmap_bulk_read(chip->regmap, chip->regs->direction,
-				 reg_direction, NBANK(chip));
-		for (i = 0; i < NBANK(chip); i++)
-			chip->irq_stat[i] &= reg_direction[i];
-		mutex_init(&chip->irq_lock);
-
-		ret = devm_request_threaded_irq(&client->dev,
-					client->irq,
-					   NULL,
-					   pca953x_irq_handler,
-					   IRQF_TRIGGER_LOW | IRQF_ONESHOT |
-						   IRQF_SHARED,
-					   dev_name(&client->dev), chip);
-		if (ret) {
-			dev_err(&client->dev, "failed to request irq %d\n",
-				client->irq);
-			return ret;
-		}
+	if (irq_base == -1)
+		return 0;
 
-		ret =  gpiochip_irqchip_add_nested(&chip->gpio_chip,
-						   &pca953x_irq_chip,
-						   irq_base,
-						   handle_simple_irq,
-						   IRQ_TYPE_NONE);
-		if (ret) {
-			dev_err(&client->dev,
-				"could not connect irqchip to gpiochip\n");
-			return ret;
-		}
+	if (!(chip->driver_data & PCA_INT))
+		return 0;
 
-		gpiochip_set_nested_irqchip(&chip->gpio_chip,
-					    &pca953x_irq_chip,
-					    client->irq);
+	ret = pca953x_read_regs(chip, chip->regs->input, chip->irq_stat);
+	if (ret)
+		return ret;
+
+	/*
+	 * There is no way to know which GPIO line generated the
+	 * interrupt.  We have to rely on the previous read for
+	 * this purpose.
+	 */
+	regmap_bulk_read(chip->regmap, chip->regs->direction, reg_direction,
+			 NBANK(chip));
+	for (i = 0; i < NBANK(chip); i++)
+		chip->irq_stat[i] &= reg_direction[i];
+	mutex_init(&chip->irq_lock);
+
+	ret = devm_request_threaded_irq(&client->dev, client->irq,
+					NULL, pca953x_irq_handler,
+					IRQF_TRIGGER_LOW | IRQF_ONESHOT |
+					IRQF_SHARED,
+					dev_name(&client->dev), chip);
+	if (ret) {
+		dev_err(&client->dev, "failed to request irq %d\n",
+			client->irq);
+		return ret;
+	}
+
+	ret =  gpiochip_irqchip_add_nested(&chip->gpio_chip, &pca953x_irq_chip,
+					   irq_base, handle_simple_irq,
+					   IRQ_TYPE_NONE);
+	if (ret) {
+		dev_err(&client->dev,
+			"could not connect irqchip to gpiochip\n");
+		return ret;
 	}
 
+	gpiochip_set_nested_irqchip(&chip->gpio_chip, &pca953x_irq_chip,
+				    client->irq);
+
 	return 0;
 }
 
Signature · 1 line
2.20.1
#1 lore raw

PATCH 2/2 gpio: pca953x: use a per instance irq_chip structure

When a system has two PCA953x GPIO expanders, the kernel complains with:

gpio gpiochip2: (0-0021): detected irqchip that is shared with multiple gpiochips: please fix the driver.

Indeed, there is a single instance of "struct irq_chip" that gets re-used for both PCA953x instance. This commit moves the "struct irq_chip" to be part of the "struct pca953x_chip", so that we have one "struct irq_chip" per PCA953X instance.

As part of this, the name of the irq_chip is also made different on a per-instance basis, now using the dev_name() of the I2C device. This changes what is visible in /proc/interrupts.

Before:

 47:          0          0   pca953x  10 Edge      e0100000.sdhci cd
 48:          0          0   pca953x   6 Edge      e0101000.sdhci cd

After:

 47:          0          0    0-0020  10 Edge      e0100000.sdhci cd
 48:          2          0    0-0020   6 Edge      e0101000.sdhci cd
---
 drivers/gpio/gpio-pca953x.c | 25 ++++++++++++-------------
 1 file changed, 12 insertions(+), 13 deletions(-)
drivers/gpio/gpio-pca953x.c +12 -13
index 4f91ce497dd1..de52f63863db 100644
@@ -150,6 +150,7 @@ struct pca953x_chip {
 	u8 irq_stat[MAX_BANK];
 	u8 irq_trig_raise[MAX_BANK];
 	u8 irq_trig_fall[MAX_BANK];
+	struct irq_chip irq_chip;
 #endif
 
 	struct i2c_client *client;
@@ -594,16 +595,6 @@ static void pca953x_irq_shutdown(struct irq_data *d)
 	chip->irq_trig_fall[d->hwirq / BANK_SZ] &= ~mask;
 }
 
-static struct irq_chip pca953x_irq_chip = {
-	.name			= "pca953x",
-	.irq_mask		= pca953x_irq_mask,
-	.irq_unmask		= pca953x_irq_unmask,
-	.irq_bus_lock		= pca953x_irq_bus_lock,
-	.irq_bus_sync_unlock	= pca953x_irq_bus_sync_unlock,
-	.irq_set_type		= pca953x_irq_set_type,
-	.irq_shutdown		= pca953x_irq_shutdown,
-};
-
 static bool pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending)
 {
 	u8 cur_stat[MAX_BANK];
@@ -699,6 +690,7 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
 			     int irq_base)
 {
 	struct i2c_client *client = chip->client;
+	struct irq_chip *irq_chip = &chip->irq_chip;
 	int reg_direction[MAX_BANK];
 	int ret, i;
 
@@ -737,7 +729,15 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
 		return ret;
 	}
 
-	ret =  gpiochip_irqchip_add_nested(&chip->gpio_chip, &pca953x_irq_chip,
+	irq_chip->name = dev_name(&chip->client->dev);
+	irq_chip->irq_mask = pca953x_irq_mask;
+	irq_chip->irq_unmask = pca953x_irq_unmask;
+	irq_chip->irq_bus_lock = pca953x_irq_bus_lock;
+	irq_chip->irq_bus_sync_unlock = pca953x_irq_bus_sync_unlock;
+	irq_chip->irq_set_type = pca953x_irq_set_type;
+	irq_chip->irq_shutdown = pca953x_irq_shutdown;
+
+	ret =  gpiochip_irqchip_add_nested(&chip->gpio_chip, irq_chip,
 					   irq_base, handle_simple_irq,
 					   IRQ_TYPE_NONE);
 	if (ret) {
@@ -746,8 +746,7 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
 		return ret;
 	}
 
-	gpiochip_set_nested_irqchip(&chip->gpio_chip, &pca953x_irq_chip,
-				    client->irq);
+	gpiochip_set_nested_irqchip(&chip->gpio_chip, irq_chip, client->irq);
 
 	return 0;
 }
Signature · 1 line
2.20.1
#2 lore raw

Re: [PATCH 2/2] gpio: pca953x: use a per instance irq_chip structure

Quoted 18 lines · Thomas Petazzoni

When a system has two PCA953x GPIO expanders, the kernel complains with:

gpio gpiochip2: (0-0021): detected irqchip that is shared with multiple gpiochips: please fix the driver.

Indeed, there is a single instance of "struct irq_chip" that gets re-used for both PCA953x instance. This commit moves the "struct irq_chip" to be part of the "struct pca953x_chip", so that we have one "struct irq_chip" per PCA953X instance.

As part of this, the name of the irq_chip is also made different on a per-instance basis, now using the dev_name() of the I2C device. This changes what is visible in /proc/interrupts.

Before:

 47:          0          0   pca953x  10 Edge      e0100000.sdhci cd
 48:          0          0   pca953x   6 Edge      e0101000.sdhci cd
Quoted 6 lines

After:

 47:          0          0    0-0020  10 Edge      e0100000.sdhci cd
 48:          2          0    0-0020   6 Edge      e0101000.sdhci cd

Patch applied.

Yours,
Linus Walleij

#3 lore raw
In reply to Thomas Petazzoni
Quoted 14 lines · Thomas Petazzoni

The current design of pca953x_irq_setup() is:

if (all conditions to support IRQ are met) {
lots of code to support IRQs, which goes to a serious indentation level.
}

return 0;

It makes more sense to handle this like this:

if (!all conditions to support IRQ are met)
return 0;

Quoted 8 lines

handle IRQ support

This commit does just this change, reducing by one tab the indentation level of the IRQ setup code. Thanks to this reduced indentation level, we are less restricted by the 80-column limit, and we can have more function arguments on the same line.

Patch applied.

Yours,
Linus Walleij