arm64: dts: meson: add simple-framebuffer nodes
Subsystems (4)
v3 cover arm64: dts: meson: add simple-framebuffer nodes
This patch series adds support for simplefb for the GXBB and GXL chips.
simple-framebuffer allows sharing a framebuffer already setup by the firmware to the kernel for a seamless boot transition.
It goes along with a u-boot patch series adding display support to GXBB & GXL [3].
Changes since v2 [2]:
- Renamed bindings file to "amlogic,simple-framebuffer.txt"
Changes since v1 [1]:
- added cover letter
- added simple-framebuffer compatible fallback to the bindings
- Updated node names and removed the unit-address
- Consolidated base nodes in meson-gx.dtsi
[1] https://patchwork.kernel.org/patch/10720879/
[2] https://patchwork.kernel.org/cover/10750205/
[3] https://patchwork.ozlabs.org/project/uboot/list/?series=86214
Maxime Jourdan (2):
dt-bindings: meson: add specific simplefb bindings
arm64: dts: meson-gx: add support for simplefb
.../display/amlogic,simple-framebuffer.txt | 33 +++++++++++++++++++ arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 22 +++++++++++++ arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 6 ++++ arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 6 ++++ 4 files changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/amlogic,simple-framebuffer.txt
Signature · 1 line
2.20.1
PATCH v3 1/2 dt-bindings: meson: add specific simplefb bindings
Similar to simple-framebuffer-sunxi, we support different display pipelines that the firmware is free to choose from.
This documents the "amlogic,simple-framebuffer" compatible and the "amlogic,pipeline" extension.
--- .../display/amlogic,simple-framebuffer.txt | 33 +++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/amlogic,simple-framebuffer.txt
Documentation/devicetree/bindings/display/amlogic,simple-framebuffer.txt new file +33 -0
@@ -0,0 +1,33 @@ +Meson specific Simple Framebuffer bindings + +This binding documents meson specific extensions to the simple-framebuffer +bindings. The meson simplefb u-boot code relies on the devicetree containing +pre-populated simplefb nodes. + +These extensions are intended so that u-boot can select the right node based +on which pipeline is being used. As such they are solely intended for +firmware / bootloader use, and the OS should ignore them. + +Required properties: +- compatible: "amlogic,simple-framebuffer", "simple-framebuffer" +- amlogic,pipeline, one of: + "vpu-cvbs" + "vpu-hdmi" + +Example: + +chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + simplefb_hdmi: framebuffer-hdmi { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-hdmi"; + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; + power-domains = <&pwrc_vpu>; + }; +};
Signature · 1 line
2.20.1
PATCH v3 2/2 arm64: dts: meson-gx: add support for simplefb
In reply to Maxime JourdanSimpleFB allows transferring a framebuffer from the firmware/bootloader to the kernel, while making sure the related clocks and power supplies stay enabled.
Add nodes for CVBS and HDMI Simple Framebuffers.
--- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 22 +++++++++++++++++++++ arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 6 ++++++ arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 6 ++++++ 3 files changed, 34 insertions(+)
arch/arm64/boot/dts/amlogic/meson-gx.dtsi +22 -0
@@ -50,6 +50,28 @@ }; }; + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + simplefb_cvbs: framebuffer-cvbs { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-cvbs"; + power-domains = <&pwrc_vpu>; + status = "disabled"; + }; + + simplefb_hdmi: framebuffer-hdmi { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-hdmi"; + power-domains = <&pwrc_vpu>; + status = "disabled"; + }; + }; + cpus { #address-cells = <0x2>; #size-cells = <0x0>;
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +6 -0
@@ -784,6 +784,12 @@ resets = <&reset RESET_SD_EMMC_C>; }; +&simplefb_hdmi { + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; +}; + &spicc { clocks = <&clkc CLKID_SPICC>; clock-names = "core";
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +6 -0
@@ -787,6 +787,12 @@ resets = <&reset RESET_SD_EMMC_C>; }; +&simplefb_hdmi { + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; +}; + &spicc { clocks = <&clkc CLKID_SPICC>; clock-names = "core";
Signature · 1 line
2.20.1
Quoted 8 lines · Maxime Jourdan
This patch series adds support for simplefb for the GXBB and GXL chips.
simple-framebuffer allows sharing a framebuffer already setup by the firmware to the kernel for a seamless boot transition.
It goes along with a u-boot patch series adding display support to GXBB & GXL [3].
Queued for v5.1 (branch: v5.1/dt64)
Kevin