mmc: mtk-sd: fix possible incomplete read ops
Subsystems (2)
PATCH 1/2 mmc: mtk-sd: fix possible incomplete read ops
The code is checking for incomplete read when it see the INT_XFER_COMPL flag, but it forget to first check whether there is anything left in the FIFO to copy to the RX buffer. This means that sometimes we will get errors because of erroneous incomplete read operation.
This commit fixes the driver re-ordering the code so that we first check for data inside the RX fifo and only after check the status of the INT_XFER_COMPL flag.
--- drivers/mmc/mtk-sd.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/mmc/mtk-sd.c +9 -9
@@ -554,6 +554,14 @@ static int msdc_pio_read(struct msdc_host *host, u8 *ptr, u32 size)break ; } + chksz =min (size, (u32 )MSDC_FIFO_SIZE ); + +if (msdc_fifo_rx_bytes (host) >= chksz) { +msdc_fifo_read (host, ptr, chksz); + ptr += chksz; + size -= chksz; + } +if (status &MSDC_INT_XFER_COMPL ) {if (size) {pr_err ("data not fully read\n" );
@@ -562,15 +570,7 @@ static int msdc_pio_read(struct msdc_host *host, u8 *ptr, u32 size)break ; } - - chksz =min (size, (u32 )MSDC_FIFO_SIZE ); - -if (msdc_fifo_rx_bytes (host) >= chksz) { -msdc_fifo_read (host, ptr, chksz); - ptr += chksz; - size -= chksz; - } - } +}return ret; }
Signature · 1 line
2.20.1
PATCH 2/2 mmc: mtk-sd: fix SPL compilation when GPIO=y and SPL_GPIO=n
It is not possible to link the SPL image when CONFIG_GPIO is enabled but CONFIG_SPL_GPIO is not. Use the IS_ENABLED macro instead to correctly check whether CONFIG_{SPL_}GPIO is enabled.
This commit fixes the following errors:
* undefined reference to `dm_gpio_get_value
* undefined reference to `gpio_request_by_name'
--- drivers/mmc/mtk-sd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/mmc/mtk-sd.c +4 -4
@@ -269,7 +269,7 @@ struct msdc_host {bool builtin_cd;/* card detection / write protection GPIOs */ -#ifdef CONFIG_DM_GPIO +#if IS_ENABLED (DM_GPIO )struct gpio_desc gpio_wp;struct gpio_desc gpio_cd;#endif
@@ -849,7 +849,7 @@ static int msdc_ops_get_cd(struct udevice *dev)return !(val &MSDC_PS_CDSTS ); } -#ifdef CONFIG_DM_GPIO +#if IS_ENABLED (DM_GPIO )if (!host->gpio_cd.dev)return 1 ;
@@ -863,7 +863,7 @@ static int msdc_ops_get_wp(struct udevice *dev) {struct msdc_host *host =dev_get_priv (dev); -#ifdef CONFIG_DM_GPIO +#if IS_ENABLED (DM_GPIO )if (!host->gpio_wp.dev)return 0 ;
@@ -1332,7 +1332,7 @@ static int msdc_ofdata_to_platdata(struct udevice *dev)if (ret <0 )return ret; -#ifdef CONFIG_DM_GPIO +#if IS_ENABLED (DM_GPIO )gpio_request_by_name (dev,"wp-gpios" ,0 , &host->gpio_wp,GPIOD_IS_IN );gpio_request_by_name (dev,"cd-gpios" ,0 , &host->gpio_cd,GPIOD_IS_IN );#endif
Signature · 1 line
2.20.1
PATCH 2/2 mmc: mtk-sd: fix SPL compilation when GPIO=y and SPL_GPIO=n
Quoted 9 lines · Fabien Parent
It is not possible to link the SPL image when
CONFIG_GPIOis enabled butCONFIG_SPL_GPIOis not. Use theIS_ENABLEDmacro instead to correctly check whether CONFIG_{SPL_}GPIO is enabled.This commit fixes the following errors:
* undefined reference to `dm_gpio_get_value
* undefined reference to `gpio_request_by_name'Signed-off-by Fabien Parent <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190126/f8dd6922/attachment.sig>
PATCH 1/2 mmc: mtk-sd: fix possible incomplete read ops
In reply to Fabien ParentQuoted 10 lines · Fabien Parent
The code is checking for incomplete read when it see the
INT_XFER_COMPLflag, but it forget to first check whether there is anything left in the FIFO to copy to the RX buffer. This means that sometimes we will get errors because of erroneous incomplete read operation.This commit fixes the driver re-ordering the code so that we first check for data inside the RX fifo and only after check the status of the
INT_XFER_COMPLflag.Signed-off-by Fabien Parent <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190126/d091f59b/attachment.sig>