Kconfig: Migrate CONFIG_BUILD_TARGET
Subsystems (5)
PATCH 1/2 Kconfig: Migrate CONFIG_BUILD_TARGET
Migrate CONFIG_BUILD_TARGET into Kconfig.
--- Kconfig | 13 +++++++++++++ README | 7 ------- arch/arm/mach-mvebu/include/mach/config.h | 5 ----- configs/SBx81LIFKW_defconfig | 1 + configs/SBx81LIFXCAT_defconfig | 1 + configs/dreamplug_defconfig | 1 + configs/ds109_defconfig | 1 + configs/guruplug_defconfig | 1 + configs/ib62x0_defconfig | 1 + configs/nsa310s_defconfig | 1 + configs/sheevaplug_defconfig | 1 + include/configs/SBx81LIFKW.h | 1 - include/configs/SBx81LIFXCAT.h | 1 - include/configs/ib62x0.h | 3 --- include/configs/mv-plug-common.h | 3 --- include/configs/nsa310s.h | 3 --- include/configs/rcar-gen3-common.h | 1 - include/configs/socfpga_common.h | 3 --- include/configs/sunxi-common.h | 1 - scripts/config_whitelist.txt | 1 - 20 files changed, 21 insertions(+), 29 deletions(-)
Kconfig +13 -0
@@ -224,6 +224,19 @@ config BUILD_ROM which are not shipped in the U-Boot source tree. Please, see doc/README.x86 for details. +config BUILD_TARGET + string "Build target special images" + default "u-boot-with-spl.sfp" if ARCH_SOCFPGA + default "u-boot-spl.kwb" if ARCH_MVEBU && SPL_BUILD + default "u-boot-elf.srec" if RCAR_GEN3 + default "u-boot.itb" if ARCH_SUNXI && ARM64 + help + Some SoCs need special image types (e.g. U-Boot binary + with a special header) as build targets. By defining + CONFIG_BUILD_TARGET in the SoC / board header, this + special image will be automatically built upon calling + make / buildman. + endmenu # General setup menu "Boot images"
README +0 -7
@@ -1998,13 +1998,6 @@ The following options need to be configured: 200 ms. - Configuration Management: - CONFIG_BUILD_TARGET - - Some SoCs need special image types (e.g. U-Boot binary - with a special header) as build targets. By defining - CONFIG_BUILD_TARGET in the SoC / board header, this - special image will be automatically built upon calling - make / buildman. CONFIG_IDENT_STRING
arch/arm/mach-mvebu/include/mach/config.h +0 -5
@@ -40,11 +40,6 @@#define CONFIG_SYS_KWD_CONFIG arch/arm/mach-mvebu/kwbimage.cfg#endif /* CONFIG_SYS_KWD_CONFIG */ -/* Add target to build it automatically upon "make" */ -#ifdef CONFIG_SPL -#define CONFIG_BUILD_TARGET "u-boot-spl.kwb" -#endif -/* end of 16M scrubbed by training in bootrom */ #define CONFIG_SYS_INIT_SP_ADDR 0x00FF0000
configs/SBx81LIFKW_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_TARGET_SBx81LIFKW=y CONFIG_IDENT_STRING="\nSBx81LIFKW" # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 +CONFIG_BUILD_TARGET="u-boot.kwb" CONFIG_SILENT_CONSOLE=y CONFIG_SILENT_U_BOOT_ONLY=y CONFIG_MISC_INIT_R=y
configs/SBx81LIFXCAT_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_TARGET_SBx81LIFXCAT=y CONFIG_IDENT_STRING="\nSBx81LIFXCAT" # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 +CONFIG_BUILD_TARGET="u-boot.kwb" CONFIG_SILENT_CONSOLE=y CONFIG_SILENT_U_BOOT_ONLY=y CONFIG_MISC_INIT_R=y
configs/dreamplug_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_IDENT_STRING="\nMarvell-DreamPlug" CONFIG_NR_DRAM_BANKS=2 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 +CONFIG_BUILD_TARGET="u-boot.kwb" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y # CONFIG_CMD_FLASH is not set
configs/ds109_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_TARGET_DS109=y CONFIG_NR_DRAM_BANKS=2 # CONFIG_SYS_MALLOC_F is not set CONFIG_HUSH_PARSER=y +CONFIG_BUILD_TARGET="u-boot.kwb" # CONFIG_CMD_FLASH is not set CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y
configs/guruplug_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_IDENT_STRING="\nMarvell-GuruPlug" CONFIG_NR_DRAM_BANKS=2 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 +CONFIG_BUILD_TARGET="u-boot.kwb" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y
configs/ib62x0_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_TARGET_IB62X0=y CONFIG_IDENT_STRING=" RaidSonic ICY BOX IB-NAS62x0" CONFIG_NR_DRAM_BANKS=2 CONFIG_BOOTDELAY=3 +CONFIG_BUILD_TARGET="u-boot.kwb" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ib62x0 => "
configs/nsa310s_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_TARGET_NSA310S=y CONFIG_NR_DRAM_BANKS=2 CONFIG_BOOTDELAY=3 +CONFIG_BUILD_TARGET="u-boot.kwb" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="nsa310s => "
configs/sheevaplug_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_IDENT_STRING="\nMarvell-Sheevaplug" CONFIG_NR_DRAM_BANKS=2 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 +CONFIG_BUILD_TARGET="u-boot.kwb" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y
include/configs/SBx81LIFKW.h +0 -1
@@ -13,7 +13,6 @@#define CONFIG_KW88F6281 1/* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg -#define CONFIG_BUILD_TARGET "u-boot.kwb"/* additions for new ARM relocation support */ #define CONFIG_SYS_SDRAM_BASE 0x00000000
include/configs/SBx81LIFXCAT.h +0 -1
@@ -13,7 +13,6 @@#define CONFIG_KW88F6281 1/* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg -#define CONFIG_BUILD_TARGET "u-boot.kwb"/* additions for new ARM relocation support */ #define CONFIG_SYS_SDRAM_BASE 0x00000000
include/configs/ib62x0.h +0 -3
@@ -15,9 +15,6 @@#define CONFIG_KW88F6281 /* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -/* Add target to build it automatically upon "make" */ -#define CONFIG_BUILD_TARGET "u-boot.kwb" -/* * Compression configuration */
include/configs/mv-plug-common.h +0 -3
@@ -13,9 +13,6 @@#define CONFIG_KW88F6281 1/* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -/* Add target to build it automatically upon "make" */ -#define CONFIG_BUILD_TARGET "u-boot.kwb" -/* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros
include/configs/nsa310s.h +0 -3
@@ -15,9 +15,6 @@#define CONFIG_KW88F6702 1/* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -/* add target to build it automatically upon "make" */ -#define CONFIG_BUILD_TARGET "u-boot.kwb" -/* compression configuration */ #define CONFIG_BZIP2
include/configs/rcar-gen3-common.h +0 -1
@@ -12,7 +12,6 @@#include <asm/arch/rmobile.h> #define CONFIG_REMAKE_ELF -#define CONFIG_BUILD_TARGET "u-boot-elf.srec"/* boot option */
include/configs/socfpga_common.h +0 -3
@@ -14,9 +14,6 @@#define CONFIG_TIMESTAMP /* Print image info with timestamp */ -/* add target to build it automatically upon "make" */ -#define CONFIG_BUILD_TARGET "u-boot-with-spl.sfp" -/* * Memory configurations */
include/configs/sunxi-common.h +0 -1
@@ -32,7 +32,6 @@#endif #ifdef CONFIG_ARM64 -#define CONFIG_BUILD_TARGET "u-boot.itb"#define CONFIG_SYS_BOOTM_LEN (32 << 20)#endif
scripts/config_whitelist.txt +0 -1
@@ -181,7 +181,6 @@ CONFIG_BS_SIZE CONFIG_BTB CONFIG_BUFNO_AUTO_INCR_BIT CONFIG_BUILD_ENVCRC -CONFIG_BUILD_TARGET CONFIG_BUS_WIDTH CONFIG_BZIP2 CONFIG_CADDY2
Signature · 1 line
2.18.0.321.gffc6fa0e3
PATCH 1/2 Kconfig: Migrate CONFIG_BUILD_TARGET
Quoted 17 lines · Jagan Teki
Migrate
CONFIG_BUILD_TARGETintoKconfig.Signed-off-by Jagan Teki <[email protected]>--- Kconfig | 13 +++++++++++++ README | 7 ------- arch/arm/mach-mvebu/include/mach/config.h | 5 ----- configs/SBx81LIFKW_defconfig | 1 + configs/SBx81LIFXCAT_defconfig | 1 + configs/dreamplug_defconfig | 1 + configs/ds109_defconfig | 1 + configs/guruplug_defconfig | 1 + configs/ib62x0_defconfig | 1 + configs/nsa310s_defconfig | 1 + configs/sheevaplug_defconfig | 1 + include/configs/SBx81LIFKW.h | 1 - include/configs/SBx81LIFXCAT.h | 1 -
Quoted 8 lines
include/configs/ib62x0.h | 3 --- include/configs/mv-plug-common.h | 3 --- include/configs/nsa310s.h | 3 --- include/configs/rcar-gen3-common.h | 1 - include/configs/socfpga_common.h | 3 --- include/configs/sunxi-common.h | 1 - scripts/config_whitelist.txt | 1 - 20 files changed, 21 insertions(+), 29 deletions(-)
Thanks,
Stefan
PATCH 1/2 Kconfig: Migrate CONFIG_BUILD_TARGET
In reply to Jagan TekiQuoted 31 lines · On Fri, 18 Jan 2019, 6:57 AM Jagan Teki <[email protected] wrote:
Migrate
CONFIG_BUILD_TARGETintoKconfig.Signed-off-by Jagan Teki <[email protected]>--- Kconfig | 13 +++++++++++++ README | 7 ------- arch/arm/mach-mvebu/include/mach/config.h | 5 ----- configs/SBx81LIFKW_defconfig | 1 + configs/SBx81LIFXCAT_defconfig | 1 + configs/dreamplug_defconfig | 1 + configs/ds109_defconfig | 1 + configs/guruplug_defconfig | 1 + configs/ib62x0_defconfig | 1 + configs/nsa310s_defconfig | 1 + configs/sheevaplug_defconfig | 1 + include/configs/SBx81LIFKW.h | 1 - include/configs/SBx81LIFXCAT.h | 1 - include/configs/ib62x0.h | 3 --- include/configs/mv-plug-common.h | 3 --- include/configs/nsa310s.h | 3 --- include/configs/rcar-gen3-common.h | 1 - include/configs/socfpga_common.h | 3 --- include/configs/sunxi-common.h | 1 - scripts/config_whitelist.txt | 1 - 20 files changed, 21 insertions(+), 29 deletions(-)Kconfig +0
-0
Kconfig config BUILD_ROM · line 233
Quoted 10 lines
Kconfig +6
-0@@ -224,6 +224,19 @@ config BUILD_ROM which are not shipped in the U-Boot source tree. Please, see doc/README.x86 for details. +config BUILD_TARGET + string "Build target special images" + default "u-boot-with-spl.sfp" if ARCH_SOCFPGA + default "u-boot-spl.kwb" if ARCH_MVEBU && SPL_BUILD + default "u-boot-elf.srec" if RCAR_GEN3 + default "u-boot.itb" if ARCH_SUNXI && ARM64
default "u-boot.kwb" if KIRKWOOD would also be good to add. I can do it if you don't send a v2.
+ help
Quoted 271 lines
Kconfig +6
-0+ Some SoCs need special image types (e.g. U-Boot binary + with a special header) as build targets. By defining + CONFIG_BUILD_TARGET in the SoC / board header, this + special image will be automatically built upon calling + make / buildman. + endmenu # General setup menu "Boot images"README +0
-7@@ -1998,13 +1998,6 @@ The following options need to be configured: 200 ms. - Configuration Management: - CONFIG_BUILD_TARGET - - Some SoCs need special image types (e.g. U-Boot binary - with a special header) as build targets. By defining - CONFIG_BUILD_TARGET in the SoC / board header, this - special image will be automatically built upon calling - make / buildman. CONFIG_IDENT_STRINGarch/arm/mach-mvebu/include/mach/config.h +0
-5@@ -40,11 +40,6 @@#define CONFIG_SYS_KWD_CONFIG arch/arm/mach-mvebu/kwbimage.cfg#endif /* CONFIG_SYS_KWD_CONFIG */ -/* Add target to build it automatically upon "make" */ -#ifdef CONFIG_SPL -#define CONFIG_BUILD_TARGET "u-boot-spl.kwb" -#endif -/* end of 16M scrubbed by training in bootrom */ #define CONFIG_SYS_INIT_SP_ADDR 0x00FF0000configs/SBx81LIFKW_defconfig +1
-0@@ -5,6 +5,7 @@ CONFIG_TARGET_SBx81LIFKW=y CONFIG_IDENT_STRING="\nSBx81LIFKW" # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 +CONFIG_BUILD_TARGET="u-boot.kwb" CONFIG_SILENT_CONSOLE=y CONFIG_SILENT_U_BOOT_ONLY=y CONFIG_MISC_INIT_R=yconfigs/SBx81LIFXCAT_defconfig +1
-0@@ -5,6 +5,7 @@ CONFIG_TARGET_SBx81LIFXCAT=y CONFIG_IDENT_STRING="\nSBx81LIFXCAT" # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 +CONFIG_BUILD_TARGET="u-boot.kwb" CONFIG_SILENT_CONSOLE=y CONFIG_SILENT_U_BOOT_ONLY=y CONFIG_MISC_INIT_R=yconfigs/dreamplug_defconfig +1
-0@@ -6,6 +6,7 @@ CONFIG_IDENT_STRING="\nMarvell-DreamPlug" CONFIG_NR_DRAM_BANKS=2 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 +CONFIG_BUILD_TARGET="u-boot.kwb" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y # CONFIG_CMD_FLASH is not setconfigs/ds109_defconfig +1
-0@@ -5,6 +5,7 @@ CONFIG_TARGET_DS109=y CONFIG_NR_DRAM_BANKS=2 # CONFIG_SYS_MALLOC_F is not set CONFIG_HUSH_PARSER=y +CONFIG_BUILD_TARGET="u-boot.kwb" # CONFIG_CMD_FLASH is not set CONFIG_CMD_IDE=y CONFIG_CMD_I2C=yconfigs/guruplug_defconfig +1
-0@@ -6,6 +6,7 @@ CONFIG_IDENT_STRING="\nMarvell-GuruPlug" CONFIG_NR_DRAM_BANKS=2 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 +CONFIG_BUILD_TARGET="u-boot.kwb" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=yconfigs/ib62x0_defconfig +1
-0@@ -5,6 +5,7 @@ CONFIG_TARGET_IB62X0=y CONFIG_IDENT_STRING=" RaidSonic ICY BOX IB-NAS62x0" CONFIG_NR_DRAM_BANKS=2 CONFIG_BOOTDELAY=3 +CONFIG_BUILD_TARGET="u-boot.kwb" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ib62x0 => "configs/nsa310s_defconfig +1
-0@@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_TARGET_NSA310S=y CONFIG_NR_DRAM_BANKS=2 CONFIG_BOOTDELAY=3 +CONFIG_BUILD_TARGET="u-boot.kwb" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="nsa310s => "configs/sheevaplug_defconfig +1
-0@@ -7,6 +7,7 @@ CONFIG_IDENT_STRING="\nMarvell-Sheevaplug" CONFIG_NR_DRAM_BANKS=2 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 +CONFIG_BUILD_TARGET="u-boot.kwb" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=yinclude/configs/SBx81LIFKW.h +0
-1@@ -13,7 +13,6 @@#define CONFIG_KW88F6281 1/* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg -#define CONFIG_BUILD_TARGET "u-boot.kwb"/* additions for new ARM relocation support */ #define CONFIG_SYS_SDRAM_BASE 0x00000000include/configs/SBx81LIFXCAT.h +0
-1@@ -13,7 +13,6 @@#define CONFIG_KW88F6281 1/* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg -#define CONFIG_BUILD_TARGET "u-boot.kwb"/* additions for new ARM relocation support */ #define CONFIG_SYS_SDRAM_BASE 0x00000000include/configs/ib62x0.h +0
-3@@ -15,9 +15,6 @@#define CONFIG_KW88F6281 /* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -/* Add target to build it automatically upon "make" */ -#define CONFIG_BUILD_TARGET "u-boot.kwb" -/* * Compression configuration */ include/configs/mv-plug-common.h +0
-3@@ -13,9 +13,6 @@#define CONFIG_KW88F6281 1/* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -/* Add target to build it automatically upon "make" */ -#define CONFIG_BUILD_TARGET "u-boot.kwb" -/* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros include/configs/nsa310s.h +0
-3@@ -15,9 +15,6 @@#define CONFIG_KW88F6702 1/* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -/* add target to build it automatically upon "make" */ -#define CONFIG_BUILD_TARGET "u-boot.kwb" -/* compression configuration */ #define CONFIG_BZIP2 include/configs/rcar-gen3-common.h +0
-1@@ -12,7 +12,6 @@#include <asm/arch/rmobile.h> #define CONFIG_REMAKE_ELF -#define CONFIG_BUILD_TARGET "u-boot-elf.srec"/* boot option */ include/configs/socfpga_common.h +0
-3@@ -14,9 +14,6 @@#define CONFIG_TIMESTAMP /* Print image info with timestamp */ -/* add target to build it automatically upon "make" */ -#define CONFIG_BUILD_TARGET "u-boot-with-spl.sfp" -/* * Memory configurations */
include/configs/sunxi-common.h +0
-1@@ -32,7 +32,6 @@#endif #ifdef CONFIG_ARM64 -#define CONFIG_BUILD_TARGET "u-boot.itb"#define CONFIG_SYS_BOOTM_LEN (32 << 20)#endif scripts/config_whitelist.txt +0
-2@@ -181,7 +181,6 @@ CONFIG_BS_SIZE CONFIG_BTB CONFIG_BUFNO_AUTO_INCR_BIT CONFIG_BUILD_ENVCRC -CONFIG_BUILD_TARGET CONFIG_BUS_WIDTH CONFIG_BZIP2 CONFIG_CADDY2 --2.18.0.321.gffc6fa0e3
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
PATCH 1/2 Kconfig: Migrate CONFIG_BUILD_TARGET
Quoted 39 lines · Chris Packham
Quoted 35 lines · On Fri, 18 Jan 2019, 6:57 AM Jagan Teki <[email protected] wrote:
Migrate
CONFIG_BUILD_TARGETintoKconfig.Signed-off-by Jagan Teki <[email protected]>--- Kconfig | 13 +++++++++++++ README | 7 ------- arch/arm/mach-mvebu/include/mach/config.h | 5 ----- configs/SBx81LIFKW_defconfig | 1 + configs/SBx81LIFXCAT_defconfig | 1 + configs/dreamplug_defconfig | 1 + configs/ds109_defconfig | 1 + configs/guruplug_defconfig | 1 + configs/ib62x0_defconfig | 1 + configs/nsa310s_defconfig | 1 + configs/sheevaplug_defconfig | 1 + include/configs/SBx81LIFKW.h | 1 - include/configs/SBx81LIFXCAT.h | 1 - include/configs/ib62x0.h | 3 --- include/configs/mv-plug-common.h | 3 --- include/configs/nsa310s.h | 3 --- include/configs/rcar-gen3-common.h | 1 - include/configs/socfpga_common.h | 3 --- include/configs/sunxi-common.h | 1 - scripts/config_whitelist.txt | 1 - 20 files changed, 21 insertions(+), 29 deletions(-)Kconfig +0
-0@@ -224,6 +224,19 @@ config BUILD_ROM which are not shipped in the U-Boot source tree. Please, see doc/README.x86 for details.
Quoted 9 lines
Kconfig config BUILD_ROM · line 232
Quoted 6 lines
Kconfig +6
-0+config BUILD_TARGET + string "Build target special images" + default "u-boot-with-spl.sfp" if ARCH_SOCFPGA + default "u-boot-spl.kwb" if ARCH_MVEBU && SPL_BUILD + default "u-boot-elf.srec" if RCAR_GEN3 + default "u-boot.itb" if ARCH_SUNXI && ARM64default "u-boot.kwb" if KIRKWOOD would also be good to add. I can do it if you don't send a v2.
Is it new change, if yes prepare another patch? if not let me know where do we need to change I mean which ARCH in above definition.
PATCH 1/2 Kconfig: Migrate CONFIG_BUILD_TARGET
Quoted 51 lines · On Fri, 18 Jan 2019, 8:03 PM Jagan Teki <[email protected] wrote:
Quoted 4 lines · Chris Packham
On Fri, 18 Jan 2019, 6:57 AM Jagan Teki <[email protected]
Quoted 35 lines · wrote:
Quoted 35 lines
Migrate
CONFIG_BUILD_TARGETintoKconfig.Signed-off-by Jagan Teki <[email protected]>--- Kconfig | 13 +++++++++++++ README | 7 ------- arch/arm/mach-mvebu/include/mach/config.h | 5 ----- configs/SBx81LIFKW_defconfig | 1 + configs/SBx81LIFXCAT_defconfig | 1 + configs/dreamplug_defconfig | 1 + configs/ds109_defconfig | 1 + configs/guruplug_defconfig | 1 + configs/ib62x0_defconfig | 1 + configs/nsa310s_defconfig | 1 + configs/sheevaplug_defconfig | 1 + include/configs/SBx81LIFKW.h | 1 - include/configs/SBx81LIFXCAT.h | 1 - include/configs/ib62x0.h | 3 --- include/configs/mv-plug-common.h | 3 --- include/configs/nsa310s.h | 3 --- include/configs/rcar-gen3-common.h | 1 - include/configs/socfpga_common.h | 3 --- include/configs/sunxi-common.h | 1 - scripts/config_whitelist.txt | 1 - 20 files changed, 21 insertions(+), 29 deletions(-)Kconfig +0
-0@@ -224,6 +224,19 @@ config BUILD_ROM which are not shipped in the U-Boot source tree. Please, see doc/README.x86 for details.Quoted 9 lines
Kconfig config BUILD_ROM · line 232
Quoted 6 lines
Kconfig +6
-0+config BUILD_TARGET + string "Build target special images" + default "u-boot-with-spl.sfp" if ARCH_SOCFPGA + default "u-boot-spl.kwb" if ARCH_MVEBU && SPL_BUILD + default "u-boot-elf.srec" if RCAR_GEN3 + default "u-boot.itb" if ARCH_SUNXI && ARM64default "u-boot.kwb" if KIRKWOOD would also be good to add. I can do it
Quoted 5 lines
if you don't send a v2.
Is it new change, if yes prepare another patch? if not let me know where do we need to change I mean which ARCH in above definition.
Yeah it'd be new to this Kconfig but it would have saved you having to update some of the defconfigs. Since you've already done the defconfig changes I can send a patch on top of this that adds a default and removes some of the defconfig changes.