Skip to contentSkip to conversation

spi: pl022: add a message state STATE_TIMEOUT for timeout transfer

PATCH In review Jiwei Sun 3 participants 3 messages Jan 18, 2019 – Jan 28, 2019

Subsystems (2)
lore
Share & tools
lore

Jiwei Sun

author
#0 lore raw

PATCH 1/1 spi: pl022: add a message state STATE_TIMEOUT for timeout transfer

When transfer timeout, give -EAGAIN to the message's status, and it can make the spi device driver choose repeated transimation or not. And if transfer timeout, output some useful information for tracing the issue.

---
 drivers/spi/spi-pl022.c | 30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)
drivers/spi/spi-pl022.c +29 -1
index 0c793e31d60f..26684178786f 100644
@@ -253,6 +253,7 @@
 #define STATE_RUNNING			((void *) 1)
 #define STATE_DONE			((void *) 2)
 #define STATE_ERROR			((void *) -1)
+#define STATE_TIMEOUT			((void *) -2)
 
 /*
  * SSP State - Whether Enabled or Disabled
@@ -1484,6 +1485,30 @@ static void do_interrupt_dma_transfer(struct pl022 *pl022)
 	writew(irqflags, SSP_IMSC(pl022->virtbase));
 }
 
+static void print_current_status(struct pl022 *pl022)
+{
+	u32 read_cr0;
+	u16 read_cr1, read_dmacr, read_sr;
+
+	if (pl022->vendor->extended_cr)
+		read_cr0 = readl(SSP_CR0(pl022->virtbase));
+	else
+		read_cr0 = readw(SSP_CR0(pl022->virtbase));
+	read_cr1 = readw(SSP_CR1(pl022->virtbase));
+	read_dmacr = readw(SSP_DMACR(pl022->virtbase));
+	read_sr = readw(SSP_SR(pl022->virtbase));
+
+	dev_warn(&pl022->adev->dev, "spi-pl022 CR0: %x\n", read_cr0);
+	dev_warn(&pl022->adev->dev, "spi-pl022 CR1: %x\n", read_cr1);
+	dev_warn(&pl022->adev->dev, "spi-pl022 DMACR: %x\n", read_dmacr);
+	dev_warn(&pl022->adev->dev, "spi-pl022 SR: %x\n", read_sr);
+	dev_warn(&pl022->adev->dev,
+			"spi-pl022 exp_fifo_level/fifodepth: %u/%d\n",
+			pl022->exp_fifo_level,
+			pl022->vendor->fifodepth);
+
+}
+
 static void do_polling_transfer(struct pl022 *pl022)
 {
 	struct spi_message *message = NULL;
@@ -1535,7 +1560,8 @@ static void do_polling_transfer(struct pl022 *pl022)
 			if (time_after(time, timeout)) {
 				dev_warn(&pl022->adev->dev,
 				"%s: timeout!\n", __func__);
-				message->state = STATE_ERROR;
+				message->state = STATE_TIMEOUT;
+				print_current_status(pl022);
 				goto out;
 			}
 			cpu_relax();
@@ -1553,6 +1579,8 @@ static void do_polling_transfer(struct pl022 *pl022)
 	/* Handle end of message */
 	if (message->state == STATE_DONE)
 		message->status = 0;
+	else if (message->state == STATE_TIMEOUT)
+		message->status = -EAGAIN;
 	else
 		message->status = -EIO;
 
Signature · 1 line
2.20.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 5 lines · Jiwei Sun

When transfer timeout, give -EAGAIN to the message's status, and it can make the spi device driver choose repeated transimation or not. And if transfer timeout, output some useful information for tracing the issue.

This looks very good and helpful!

Yours,
Linus Walleij

maintainer
#2 lore raw

Applied "spi: pl022: add a message state STATE_TIMEOUT for timeout transfer" to the spi tree

In reply to Jiwei Sun

The patch

spi: pl022: add a message state STATE_TIMEOUT for timeout transfer

has been applied to the spi tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 7aef2b646b24247d880a353e09d4e10614a61cd6 Mon Sep 17 00:00:00 2001

From: Jiwei Sun <[email protected]>
Date: Fri, 18 Jan 2019 11:32:29 +0800
Subject: [PATCH] spi: pl022: add a message state STATE_TIMEOUT for timeout
transfer

When transfer timeout, give -EAGAIN to the message's status, and it can make the spi device driver choose repeated transimation or not. And if transfer timeout, output some useful information for tracing the issue.

---
 drivers/spi/spi-pl022.c | 30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)
drivers/spi/spi-pl022.c +29 -1
index 0c793e31d60f..26684178786f 100644
@@ -253,6 +253,7 @@
 #define STATE_RUNNING			((void *) 1)
 #define STATE_DONE			((void *) 2)
 #define STATE_ERROR			((void *) -1)
+#define STATE_TIMEOUT			((void *) -2)
 
 /*
  * SSP State - Whether Enabled or Disabled
@@ -1484,6 +1485,30 @@ static void do_interrupt_dma_transfer(struct pl022 *pl022)
 	writew(irqflags, SSP_IMSC(pl022->virtbase));
 }
 
+static void print_current_status(struct pl022 *pl022)
+{
+	u32 read_cr0;
+	u16 read_cr1, read_dmacr, read_sr;
+
+	if (pl022->vendor->extended_cr)
+		read_cr0 = readl(SSP_CR0(pl022->virtbase));
+	else
+		read_cr0 = readw(SSP_CR0(pl022->virtbase));
+	read_cr1 = readw(SSP_CR1(pl022->virtbase));
+	read_dmacr = readw(SSP_DMACR(pl022->virtbase));
+	read_sr = readw(SSP_SR(pl022->virtbase));
+
+	dev_warn(&pl022->adev->dev, "spi-pl022 CR0: %x\n", read_cr0);
+	dev_warn(&pl022->adev->dev, "spi-pl022 CR1: %x\n", read_cr1);
+	dev_warn(&pl022->adev->dev, "spi-pl022 DMACR: %x\n", read_dmacr);
+	dev_warn(&pl022->adev->dev, "spi-pl022 SR: %x\n", read_sr);
+	dev_warn(&pl022->adev->dev,
+			"spi-pl022 exp_fifo_level/fifodepth: %u/%d\n",
+			pl022->exp_fifo_level,
+			pl022->vendor->fifodepth);
+
+}
+
 static void do_polling_transfer(struct pl022 *pl022)
 {
 	struct spi_message *message = NULL;
@@ -1535,7 +1560,8 @@ static void do_polling_transfer(struct pl022 *pl022)
 			if (time_after(time, timeout)) {
 				dev_warn(&pl022->adev->dev,
 				"%s: timeout!\n", __func__);
-				message->state = STATE_ERROR;
+				message->state = STATE_TIMEOUT;
+				print_current_status(pl022);
 				goto out;
 			}
 			cpu_relax();
@@ -1553,6 +1579,8 @@ static void do_polling_transfer(struct pl022 *pl022)
 	/* Handle end of message */
 	if (message->state == STATE_DONE)
 		message->status = 0;
+	else if (message->state == STATE_TIMEOUT)
+		message->status = -EAGAIN;
 	else
 		message->status = -EIO;
 
Signature · 1 line
2.20.1