mesh: Add D-Bus policy for Bluetooth mesh daemon
Subsystems (2)
PATCH 1/1 mesh: Add D-Bus policy for Bluetooth mesh daemon
This adds new D-Bus policy file btmesh.conf
--- Makefile.mesh | 6 ++++++ mesh/btmesh.conf | 24 ++++++++++++++++++++++++ 2 files changed, 30 insertions(+) create mode 100644 mesh/btmesh.conf
Makefile.mesh +6 -0
@@ -1,5 +1,9 @@ if MESH +if DATAFILES +dbus_DATA += mesh/btmesh.conf +endif + mesh_sources = mesh/mesh.h mesh/mesh.c \ mesh/net_keys.h mesh/net_keys.c \ mesh/mesh-io.h mesh/mesh-io.c \
@@ -27,4 +31,6 @@ libexec_PROGRAMS += mesh/meshd mesh_meshd_SOURCES = $(mesh_sources) mesh/main.c mesh_meshd_LDADD = src/libshared-ell.la $(ell_ldadd) -ljson-c mesh_meshd_DEPENDENCIES = $(ell_dependencies) src/libshared-ell.la + +EXTRA_DIST += mesh/btmesh.conf endif
mesh/btmesh.conf new file +24 -0
@@ -0,0 +1,24 @@ +<!-- This configuration file specifies the required security policies + for Bluetooth Mesh daemon to work. --> + +<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN" + "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd"> +<busconfig> + + <!-- ../system.conf have denied everything, so we just punch some holes --> + + <policy user="root"> + <allow own="org.bluez.mesh"/> + <allow send_destination="org.bluez.mesh"/> + <allow send_interface="org.bluez.mesh.Application1"/> + <allow send_interface="org.bluez.mesh.Element1"/> + <allow send_interface="org.bluez.mesh.ProvisionAgent1"/> + <allow send_interface="org.freedesktop.DBus.ObjectManager"/> + <allow send_interface="org.freedesktop.DBus.Properties"/> + </policy> + + <policy context="default"> + <allow send_destination="org.bluez.mesh"/> + </policy> + +</busconfig>
Signature · 1 line
2.17.2
Hi Inga,
Quoted 60 lines · Inga Stotland
This adds new D-Bus policy file btmesh.conf
--- Makefile.mesh | 6 ++++++ mesh/btmesh.conf | 24 ++++++++++++++++++++++++ 2 files changed, 30 insertions(+) create mode 100644 mesh/btmesh.confMakefile.mesh +6
-0@@ -1,5 +1,9 @@ if MESH +if DATAFILES +dbus_DATA += mesh/btmesh.conf +endif + mesh_sources = mesh/mesh.h mesh/mesh.c \ mesh/net_keys.h mesh/net_keys.c \ mesh/mesh-io.h mesh/mesh-io.c \@@ -27,4 +31,6 @@ libexec_PROGRAMS += mesh/meshd mesh_meshd_SOURCES = $(mesh_sources) mesh/main.c mesh_meshd_LDADD = src/libshared-ell.la $(ell_ldadd) -ljson-c mesh_meshd_DEPENDENCIES = $(ell_dependencies) src/libshared-ell.la + +EXTRA_DIST += mesh/btmesh.conf endifmesh/btmesh.conf new file +24
-1@@ -0,0 +1,24 @@ +<!-- This configuration file specifies the required security policies + for Bluetooth Mesh daemon to work. --> + +<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN" + "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd"> +<busconfig> + + <!-- ../system.conf have denied everything, so we just punch some holes --> + + <policy user="root"> + <allow own="org.bluez.mesh"/> + <allow send_destination="org.bluez.mesh"/> + <allow send_interface="org.bluez.mesh.Application1"/> + <allow send_interface="org.bluez.mesh.Element1"/> + <allow send_interface="org.bluez.mesh.ProvisionAgent1"/> + <allow send_interface="org.freedesktop.DBus.ObjectManager"/> + <allow send_interface="org.freedesktop.DBus.Properties"/> + </policy> + + <policy context="default"> + <allow send_destination="org.bluez.mesh"/> + </policy> + +</busconfig> --
Quoted 1 line
2.17.2
Any plans to put together a btmesh.service file for systemd as well?
Hi Luiz,
Quoted 69 lines · Luiz
Hi Inga,
On Fri, Jan 18, 2019 at 12:47 AM Inga Stotland <
[email protected]> wrote:This adds new D-Bus policy file btmesh.conf
--- Makefile.mesh | 6 ++++++ mesh/btmesh.conf | 24 ++++++++++++++++++++++++ 2 files changed, 30 insertions(+) create mode 100644 mesh/btmesh.confMakefile.mesh +6
-0@@ -1,5 +1,9 @@ if MESH +if DATAFILES +dbus_DATA += mesh/btmesh.conf +endif + mesh_sources = mesh/mesh.h mesh/mesh.c \ mesh/net_keys.h mesh/net_keys.c \ mesh/mesh-io.h mesh/mesh-io.c \@@ -27,4 +31,6 @@ libexec_PROGRAMS += mesh/meshd mesh_meshd_SOURCES = $(mesh_sources) mesh/main.c mesh_meshd_LDADD = src/libshared-ell.la $(ell_ldadd) -ljson-c mesh_meshd_DEPENDENCIES = $(ell_dependencies) src/libshared-ell.la + +EXTRA_DIST += mesh/btmesh.conf endifmesh/btmesh.conf new file +1
-0@@ -0,0 +1,24 @@ +<!-- This configuration file specifies the required securitypolicies
mesh/btmesh.conf new file +3
-0+ for Bluetooth Mesh daemon to work. --> + +<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS BusConfiguration 1.0//EN"
+ "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">; +<busconfig>mesh/btmesh.conf new file +2
-0+ + <!-- ../system.conf have denied everything, so we just punch someholes -->
mesh/btmesh.conf new file +16
-1+ + <policy user="root"> + <allow own="org.bluez.mesh"/> + <allow send_destination="org.bluez.mesh"/> + <allow send_interface="org.bluez.mesh.Application1"/> + <allow send_interface="org.bluez.mesh.Element1"/> + <allow send_interface="org.bluez.mesh.ProvisionAgent1"/> + <allow send_interface="org.freedesktop.DBus.ObjectManager"/> + <allow send_interface="org.freedesktop.DBus.Properties"/> + </policy> + + <policy context="default"> + <allow send_destination="org.bluez.mesh"/> + </policy> + +</busconfig> --2.17.2
Quoted 3 lines
Any plans to put together a btmesh.service file for systemd as well?
Yes, but for now I would like to hold off until mesh daemon and bluetoothd can co-exist on one controller. Currently, mesh daemon requires a sole ownership of an hci device.
Regards,
Inga
Marcel Holtmann
maintainerHi Inga,
Quoted 14 lines
This adds new D-Bus policy file btmesh.conf
---
Makefile.mesh | 6 ++++++mesh/btmesh.conf| 24 ++++++++++++++++++++++++2 files changed, 30 insertions(+)create mode 100644
mesh/btmesh.confMakefile.mesh +0
-0@@ -1,5 +1,9 @@if MESH
Makefile.mesh line 6
Quoted 4 lines
Makefile.mesh +4
-0+if DATAFILES +dbus_DATA += mesh/btmesh.conf +endif +
I prefer this is named bluetooth-mesh.conf.
And for the daemon binary name this might be better as bluetoothd-mesh instead of just meshd.
Quoted 16 lines
mesh_sources = mesh/mesh.h mesh/mesh.c \ mesh/net_keys.h mesh/net_keys.c \ mesh/mesh-io.h mesh/mesh-io.c \Makefile.mesh +0
-0@@ -27,4 +31,6 @@ libexec_PROGRAMS += mesh/meshd
mesh_meshd_SOURCES= $(mesh_sources)mesh/main.cmesh_meshd_LDADD= src/libshared-ell.la $(ell_ldadd) -ljson-cmesh_meshd_DEPENDENCIES= $(ell_dependencies) src/libshared-ell.laMakefile.mesh +2
-0+ +EXTRA_DIST += mesh/btmesh.confendif
mesh/btmesh.conf new file +0
-0
mesh/btmesh.conf line 2
Quoted 2 lines
mesh/btmesh.conf new file +2
-0@@ -0,0 +1,24 @@ +<!-- This configuration file specifies the required security policies + for Bluetooth Mesh daemon to work. —>
Lower case “mesh” here.
Quoted 5 lines
mesh/btmesh.conf new file +5
-0+ +<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN" + "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd"> +<busconfig> +
mesh/btmesh.conf
Quoted 10 lines
mesh/btmesh.conf new file +10
-0+ <!-- ../system.conf have denied everything, so we just punch some holes --> + + <policy user="root"> + <allow own="org.bluez.mesh"/> + <allow send_destination="org.bluez.mesh"/> + <allow send_interface="org.bluez.mesh.Application1"/> + <allow send_interface="org.bluez.mesh.Element1"/> + <allow send_interface="org.bluez.mesh.ProvisionAgent1"/> + <allow send_interface="org.freedesktop.DBus.ObjectManager"/> + <allow send_interface="org.freedesktop.DBus.Properties”/>
Do you need the last two?
mesh/btmesh.conf line 24
Quoted 7 lines
mesh/btmesh.conf new file +7
-0+ </policy> + + <policy context="default"> + <allow send_destination="org.bluez.mesh"/> + </policy> + +</busconfig>
Regards
Marcel
Hi Marcel,
Quoted 21 lines · Marcel Holtmann
Hi Inga,
This adds new D-Bus policy file btmesh.conf
---
Makefile.mesh | 6 ++++++mesh/btmesh.conf| 24 ++++++++++++++++++++++++2 files changed, 30 insertions(+)create mode 100644
mesh/btmesh.confMakefile.mesh +0
-0@@ -1,5 +1,9 @@if MESH
Makefile.mesh +4
-0+if DATAFILES +dbus_DATA += mesh/btmesh.conf +endif +
Quoted 3 lines
I prefer this is named bluetooth-mesh.conf.
And for the daemon binary name this might be better as bluetoothd-mesh instead of just meshd.
Agreed: makes it easier finding the process by name
Quoted 38 lines
mesh_sources = mesh/mesh.h mesh/mesh.c \ mesh/net_keys.h mesh/net_keys.c \ mesh/mesh-io.h mesh/mesh-io.c \Makefile.mesh +0
-0@@ -27,4 +31,6 @@ libexec_PROGRAMS += mesh/meshd
mesh_meshd_SOURCES= $(mesh_sources)mesh/main.cmesh_meshd_LDADD= src/libshared-ell.la $(ell_ldadd) -ljson-cmesh_meshd_DEPENDENCIES= $(ell_dependencies) src/libshared-ell.laMakefile.mesh +2
-0+ +EXTRA_DIST += mesh/btmesh.confendif
mesh/btmesh.conf new file +2
-0@@ -0,0 +1,24 @@ +<!-- This configuration file specifies the required security policies + for Bluetooth Mesh daemon to work. —>Lower case “mesh” here.
mesh/btmesh.conf new file +15
-0+ +<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN" + "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd"> +<busconfig> + + <!-- ../system.conf have denied everything, so we just punch some holes --> + + <policy user="root"> + <allow own="org.bluez.mesh"/> + <allow send_destination="org.bluez.mesh"/> + <allow send_interface="org.bluez.mesh.Application1"/> + <allow send_interface="org.bluez.mesh.Element1"/> + <allow send_interface="org.bluez.mesh.ProvisionAgent1"/> + <allow send_interface="org.freedesktop.DBus.ObjectManager"/> + <allow send_interface="org.freedesktop.DBus.Properties”/>
Quoted 1 line
Do you need the last two?
Not really. Will remove.
Quoted 9 lines
mesh/btmesh.conf new file +7
-0+ </policy> + + <policy context="default"> + <allow send_destination="org.bluez.mesh"/> + </policy> + +</busconfig>
Quoted 4 lines
Regards
Marcel
Thanks,
Inga