Skip to contentSkip to conversation

net: introduce a knob to control whether to inherit devconf config

PATCH Applied Cong Wang 4 participants 4 messages Jan 18, 2019 – Jan 22, 2019

Subsystems (4)
lore
Share & tools
lore

Cong Wang

author
#0 lore raw

PATCH 1/1 net: introduce a knob to control whether to inherit devconf config

There have been many people complaining about the inconsistent behaviors of IPv4 and IPv6 devconf when creating new network namespaces. Currently, for IPv4, we inherit all current settings from init_net, but for IPv6 we reset all setting to default.

This patch introduces a new /proc file /proc/sys/net/core/devconf_inherit_init_net to control the behavior of whether to inhert sysctl current settings from init_net. This file itself is only available in init_net.

As demonstrated below:

Initial setup in init_net:

 # cat /proc/sys/net/ipv4/conf/all/rp_filter
 2
 # cat /proc/sys/net/ipv6/conf/all/accept_dad
 1

Default value 0 (current behavior):

 # ip netns del test
 # ip netns add test
 # ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter
 2
 # ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad
 0

Set to 1 (inherit from init_net):

 # echo 1 > /proc/sys/net/core/devconf_inherit_init_net
 # ip netns del test
 # ip netns add test
 # ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter
 2
 # ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad
 1

Set to 2 (reset to default):

 # echo 2 > /proc/sys/net/core/devconf_inherit_init_net
 # ip netns del test
 # ip netns add test
 # ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter
 0
 # ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad
 0

Set to a value out of range (invalid):

 # echo 3 > /proc/sys/net/core/devconf_inherit_init_net
 -bash: echo: write error: Invalid argument
 # echo -1 > /proc/sys/net/core/devconf_inherit_init_net
 -bash: echo: write error: Invalid argument
---
 Documentation/sysctl/net.txt | 14 ++++++++++++
 include/linux/netdevice.h    |  1 +
 net/core/sysctl_net_core.c   | 18 +++++++++++++++
 net/ipv4/devinet.c           | 43 +++++++++++++++++-------------------
 net/ipv6/addrconf.c          |  5 +++++
 5 files changed, 58 insertions(+), 23 deletions(-)
Documentation/sysctl/net.txt +14 -0
index 2793d4eac55f..bc0680706870 100644
@@ -291,6 +291,20 @@ user space is responsible for creating them if needed.
 
 Default : 0  (for compatibility reasons)
 
+devconf_inherit_init_net
+----------------------------
+
+Controls if a new network namespace should inherit all current
+settings under /proc/sys/net/{ipv4,ipv6}/conf/{all,default}/. By
+default, we keep the current behavior: for IPv4 we inherit all current
+settings from init_net and for IPv6 we reset all settings to default.
+
+If set to 1, both IPv4 and IPv6 settings are forced to inherit from
+current ones in init_net. If set to 2, both IPv4 and IPv6 settings are
+forced to reset to their default values.
+
+Default : 0  (for compatibility reasons)
+
 2. /proc/sys/net/unix - Parameters for Unix domain sockets
 -------------------------------------------------------
 
include/linux/netdevice.h +1 -0
index 1377d085ef99..a7fe028a2879 100644
@@ -630,6 +630,7 @@ struct netdev_queue {
 } ____cacheline_aligned_in_smp;
 
 extern int sysctl_fb_tunnels_only_for_init_net;
+extern int sysctl_devconf_inherit_init_net;
 
 static inline bool net_has_fallback_tunnels(const struct net *net)
 {
net/core/sysctl_net_core.c +18 -0
index d67ec17f2cc8..84bf2861f45f 100644
@@ -36,6 +36,15 @@ static int net_msg_warn;	/* Unused, but still a sysctl */
 int sysctl_fb_tunnels_only_for_init_net __read_mostly = 0;
 EXPORT_SYMBOL(sysctl_fb_tunnels_only_for_init_net);
 
+/* 0 - Keep current behavior:
+ *     IPv4: inherit all current settings from init_net
+ *     IPv6: reset all settings to default
+ * 1 - Both inherit all current settings from init_net
+ * 2 - Both reset all settings to default
+ */
+int sysctl_devconf_inherit_init_net __read_mostly;
+EXPORT_SYMBOL(sysctl_devconf_inherit_init_net);
+
 #ifdef CONFIG_RPS
 static int rps_sock_flow_sysctl(struct ctl_table *table, int write,
 				void __user *buffer, size_t *lenp, loff_t *ppos)
@@ -544,6 +553,15 @@ static struct ctl_table net_core_table[] = {
 		.extra1		= &zero,
 		.extra2		= &one,
 	},
+	{
+		.procname	= "devconf_inherit_init_net",
+		.data		= &sysctl_devconf_inherit_init_net,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &zero,
+		.extra2		= &two,
+	},
 	{ }
 };
 
net/ipv4/devinet.c +20 -23

67 lines not on this page · raw message

net/ipv6/addrconf.c +5 -0
index 93d5ad2b1a69..0642e5ea34d5 100644
@@ -6822,6 +6822,11 @@ static int __net_init addrconf_init_net(struct net *net)
 	if (!dflt)
 		goto err_alloc_dflt;
 
+	if (sysctl_devconf_inherit_init_net == 1 && !net_eq(net, &init_net)) {
+		memcpy(all, init_net.ipv6.devconf_all, sizeof(ipv6_devconf));
+		memcpy(dflt, init_net.ipv6.devconf_dflt, sizeof(ipv6_devconf_dflt));
+	}
+
 	/* these will be inherited by all namespaces */
 	dflt->autoconf = ipv6_defaults.autoconf;
 	dflt->disable_ipv6 = ipv6_defaults.disable_ipv6;
Signature · 1 line
2.20.1
Acked-by on v1 1/1
#1 lore raw

Le 18/01/2019 à 08:27, Cong Wang a écrit :

Quoted 50 lines

There have been many people complaining about the inconsistent behaviors of IPv4 and IPv6 devconf when creating new network namespaces. Currently, for IPv4, we inherit all current settings from init_net, but for IPv6 we reset all setting to default.

This patch introduces a new /proc file /proc/sys/net/core/devconf_inherit_init_net to control the behavior of whether to inhert sysctl current settings from init_net. This file itself is only available in init_net.

As demonstrated below:

Initial setup in init_net:

 # cat /proc/sys/net/ipv4/conf/all/rp_filter
 2
 # cat /proc/sys/net/ipv6/conf/all/accept_dad
 1

Default value 0 (current behavior):

 # ip netns del test
 # ip netns add test
 # ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter
 2
 # ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad
 0

Set to 1 (inherit from init_net):

 # echo 1 > /proc/sys/net/core/devconf_inherit_init_net
 # ip netns del test
 # ip netns add test
 # ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter
 2
 # ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad
 1

Set to 2 (reset to default):

 # echo 2 > /proc/sys/net/core/devconf_inherit_init_net
 # ip netns del test
 # ip netns add test
 # ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter
 0
 # ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad
 0

Set to a value out of range (invalid):

 # echo 3 > /proc/sys/net/core/devconf_inherit_init_net
 -bash: echo: write error: Invalid argument
 # echo -1 > /proc/sys/net/core/devconf_inherit_init_net
 -bash: echo: write error: Invalid argument
Quoted 4 lines

Nice!

Acked-by
#2 lore raw
Quoted 52 lines · Nicolas Dichtel
Quoted 50 lines · Cong Wang

There have been many people complaining about the inconsistent behaviors of IPv4 and IPv6 devconf when creating new network namespaces. Currently, for IPv4, we inherit all current settings from init_net, but for IPv6 we reset all setting to default.

This patch introduces a new /proc file /proc/sys/net/core/devconf_inherit_init_net to control the behavior of whether to inhert sysctl current settings from init_net. This file itself is only available in init_net.

As demonstrated below:

Initial setup in init_net:

 # cat /proc/sys/net/ipv4/conf/all/rp_filter
 2
 # cat /proc/sys/net/ipv6/conf/all/accept_dad
 1

Default value 0 (current behavior):

 # ip netns del test
 # ip netns add test
 # ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter
 2
 # ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad
 0

Set to 1 (inherit from init_net):

 # echo 1 > /proc/sys/net/core/devconf_inherit_init_net
 # ip netns del test
 # ip netns add test
 # ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter
 2
 # ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad
 1

Set to 2 (reset to default):

 # echo 2 > /proc/sys/net/core/devconf_inherit_init_net
 # ip netns del test
 # ip netns add test
 # ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter
 0
 # ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad
 0

Set to a value out of range (invalid):

 # echo 3 > /proc/sys/net/core/devconf_inherit_init_net
 -bash: echo: write error: Invalid argument
 # echo -1 > /proc/sys/net/core/devconf_inherit_init_net
 -bash: echo: write error: Invalid argument
Quoted 7 lines
Quoted 4 lines

Nice!

maintainer Applied
#3 lore raw
In reply to Cong Wang

From: Cong Wang <[email protected]>
Date: Thu, 17 Jan 2019 23:27:11 -0800

Quoted 9 lines

There have been many people complaining about the inconsistent behaviors of IPv4 and IPv6 devconf when creating new network namespaces. Currently, for IPv4, we inherit all current settings from init_net, but for IPv6 we reset all setting to default.

This patch introduces a new /proc file /proc/sys/net/core/devconf_inherit_init_net to control the behavior of whether to inhert sysctl current settings from init_net. This file itself is only available in init_net.

...

Quoted 4 lines

Applied, thanks.