Skip to contentSkip to conversation

bpftool: Fix prog dump by tag

PATCH Applied Jiri Olsa 4 participants 4 messages Jan 18, 2019 – Jan 23, 2019

Subsystems (4)
lore
Share & tools
lore

Jiri Olsa

author reviewer
#0 lore raw

PATCH 1/1 bpftool: Fix prog dump by tag

Lance reported an issue with bpftool not being able to dump program if there are more programs loaded and you want to dump any but the first program, like:

  # bpftool prog
  28: kprobe  name trace_req_start  tag 1dfc28ba8b3dd597  gpl
  	loaded_at 2019-01-18T17:02:40+1100  uid 0
  	xlated 112B  jited 109B  memlock 4096B  map_ids 13
  29: kprobe  name trace_req_compl  tag 5b6a5ecc6030a683  gpl
  	loaded_at 2019-01-18T17:02:40+1100  uid 0
  	xlated 928B  jited 575B  memlock 4096B  map_ids 13,14
  #  bpftool prog dum jited tag 1dfc28ba8b3dd597
   0:	push   %rbp
   1:	mov    %rsp,%rbp
  ...

# bpftool prog dum jited tag 5b6a5ecc6030a683
Error: can't get prog info (29): Bad address

The problem is in the prog_fd_by_tag function not cleaning the struct bpf_prog_info before another request, so the previous program length is still in there and kernel assumes it needs to dump the program, which fails because there's no user pointer set.

Moving the struct bpf_prog_info declaration into the loop, so it gets cleaned before each query.

---
 tools/bpf/bpftool/prog.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
tools/bpf/bpftool/prog.c +3 -2
index 2d1bb7d6ff51..b54ed82b9589 100644
@@ -78,13 +78,14 @@ static void print_boot_time(__u64 nsecs, char *buf, unsigned int size)
 
 static int prog_fd_by_tag(unsigned char *tag)
 {
-	struct bpf_prog_info info = {};
-	__u32 len = sizeof(info);
 	unsigned int id = 0;
 	int err;
 	int fd;
 
 	while (true) {
+		struct bpf_prog_info info = {};
+		__u32 len = sizeof(info);
+
 		err = bpf_prog_get_next_id(id, &id);
 		if (err) {
 			p_err("%s", strerror(errno));
Signature · 1 line
2.17.2
Reviewed-by on v1 1/1
#1 lore raw

2019-01-18 13:58 UTC+0100 ~ Jiri Olsa <[email protected]>

Quoted 25 lines

Lance reported an issue with bpftool not being able to dump program if there are more programs loaded and you want to dump any but the first program, like:

  # bpftool prog
  28: kprobe  name trace_req_start  tag 1dfc28ba8b3dd597  gpl
  	loaded_at 2019-01-18T17:02:40+1100  uid 0
  	xlated 112B  jited 109B  memlock 4096B  map_ids 13
  29: kprobe  name trace_req_compl  tag 5b6a5ecc6030a683  gpl
  	loaded_at 2019-01-18T17:02:40+1100  uid 0
  	xlated 928B  jited 575B  memlock 4096B  map_ids 13,14
  #  bpftool prog dum jited tag 1dfc28ba8b3dd597
   0:	push   %rbp
   1:	mov    %rsp,%rbp
  ...

# bpftool prog dum jited tag 5b6a5ecc6030a683
Error: can't get prog info (29): Bad address

The problem is in the prog_fd_by_tag function not cleaning the struct bpf_prog_info before another request, so the previous program length is still in there and kernel assumes it needs to dump the program, which fails because there's no user pointer set.

Quoted 5 lines

Moving the struct bpf_prog_info declaration into the loop, so it gets cleaned before each query.

Thanks for the fix!

Acked-by on v1 1/1
#2 lore raw
In reply to Jiri Olsa
Quoted 25 lines · Jiri Olsa

Lance reported an issue with bpftool not being able to dump program if there are more programs loaded and you want to dump any but the first program, like:

  # bpftool prog
  28: kprobe  name trace_req_start  tag 1dfc28ba8b3dd597  gpl
  	loaded_at 2019-01-18T17:02:40+1100  uid 0
  	xlated 112B  jited 109B  memlock 4096B  map_ids 13
  29: kprobe  name trace_req_compl  tag 5b6a5ecc6030a683  gpl
  	loaded_at 2019-01-18T17:02:40+1100  uid 0
  	xlated 928B  jited 575B  memlock 4096B  map_ids 13,14
  #  bpftool prog dum jited tag 1dfc28ba8b3dd597
   0:	push   %rbp
   1:	mov    %rsp,%rbp
  ...

# bpftool prog dum jited tag 5b6a5ecc6030a683
Error: can't get prog info (29): Bad address

The problem is in the prog_fd_by_tag function not cleaning the struct bpf_prog_info before another request, so the previous program length is still in there and kernel assumes it needs to dump the program, which fails because there's no user pointer set.

Quoted 5 lines

Moving the struct bpf_prog_info declaration into the loop, so it gets cleaned before each query.

Aw.

Thanks!

maintainer Applied
#3 lore raw
In reply to Jiri Olsa
Quoted 25 lines · Jiri Olsa

Lance reported an issue with bpftool not being able to dump program if there are more programs loaded and you want to dump any but the first program, like:

  # bpftool prog
  28: kprobe  name trace_req_start  tag 1dfc28ba8b3dd597  gpl
  	loaded_at 2019-01-18T17:02:40+1100  uid 0
  	xlated 112B  jited 109B  memlock 4096B  map_ids 13
  29: kprobe  name trace_req_compl  tag 5b6a5ecc6030a683  gpl
  	loaded_at 2019-01-18T17:02:40+1100  uid 0
  	xlated 928B  jited 575B  memlock 4096B  map_ids 13,14
  #  bpftool prog dum jited tag 1dfc28ba8b3dd597
   0:	push   %rbp
   1:	mov    %rsp,%rbp
  ...

# bpftool prog dum jited tag 5b6a5ecc6030a683
Error: can't get prog info (29): Bad address

The problem is in the prog_fd_by_tag function not cleaning the struct bpf_prog_info before another request, so the previous program length is still in there and kernel assumes it needs to dump the program, which fails because there's no user pointer set.

Quoted 5 lines

Moving the struct bpf_prog_info declaration into the loop, so it gets cleaned before each query.

Applied to bpf and added Fixes tags, thanks!