Add cpufreq support for Armada 8K
Subsystems (2)
Gregory CLEMENT
maintainerv5 cover Add cpufreq support for Armada 8K
Hi,
this is the fifth version of a the series adding the cpufreq support for the Marvell Armada 8K SoCs.
Gregory
Changelog:
v4 -> v5:
- Rebased onto v5.0-rc1
- Rewrite the clk_get part in armada_8k_get_sharing_cpus()
- Reverse the call function order in armada_8k_cpufreq_exit()
v3 -> v4:
- Remove most of the global variable and use the private data of the platfrom device to store the freq_tables struct.
- Remove the clk pointer of the freq_table struct which is no more needed with the new way to register the opp
- Check the get_cpu_device() return.
- Balance the clk_get() calls.
- No more use the devm_ function.
- Base the registration of the opp on the cpu mask updated after each iteration to find the shared cpus.
- Base the free on the NULL or 0 value of the freq_table struct members, it allows to remove the global index.
v2 -> v3
- Make the driver really modular (modprobe;modprobe -r;modprobe; is working)
- Don't use anymore 100MHz as minimal frequency, but only max frequency/4
- Fix remaining warning reported by checkpatch
- Rework the registering of the opp
v1 -> v2:
- Fix typos in MAINTAINERS (reported by Baruch Siach) and in armada-8k-cpufreq.c (reported by Thomas Petazzoni)
- Fix indentation in Kconfig.arm (reported by Thomas Petazzoni)
- Use const for opps_div (reported by Thomas Petazzoni)
- Fix memory leak of opps_array (reported by Thomas Petazzoni)
Gregory CLEMENT (2):
MAINTAINERS: add new entries for Armada 8K cpufreq driver
cpufreq: ap806: add cpufreq driver for Armada 8K
MAINTAINERS | 1 + drivers/cpufreq/Kconfig.arm | 11 ++ drivers/cpufreq/Makefile | 1 + drivers/cpufreq/armada-8k-cpufreq.c | 203 ++++++++++++++++++++++++++++ 4 files changed, 216 insertions(+) create mode 100644 drivers/cpufreq/armada-8k-cpufreq.c
Signature · 1 line
2.20.1
Gregory CLEMENT
maintainerPATCH v5 1/2 MAINTAINERS: add new entries for Armada 8K cpufreq driver
This new driver belongs to the mvebu family, update the MAINTAINER file to document it.
--- MAINTAINERS | 1 + 1 file changed, 1 insertion(+)
MAINTAINERS +1 -0
@@ -1737,6 +1737,7 @@ F: arch/arm/configs/mvebu_*_defconfig F: arch/arm/mach-mvebu/ F: arch/arm64/boot/dts/marvell/armada* F: drivers/cpufreq/armada-37xx-cpufreq.c +F: drivers/cpufreq/armada-8k-cpufreq.c F: drivers/cpufreq/mvebu-cpufreq.c F: drivers/irqchip/irq-armada-370-xp.c F: drivers/irqchip/irq-mvebu-*
Signature · 1 line
2.20.1
Gregory CLEMENT
maintainerPATCH v5 2/2 cpufreq: ap806: add cpufreq driver for Armada 8K
In reply to Gregory CLEMENTAdd cpufreq driver for Marvell AP-806 found on Aramda 8K. The AP-806 has DFS (Dynamic Frequency Scaling) with coupled clock domain for two clusters, so this driver will directly use generic cpufreq-dt driver as backend.
Based on the work of Omri Itach <[email protected]>.
--- drivers/cpufreq/Kconfig.arm | 11 ++ drivers/cpufreq/Makefile | 1 + drivers/cpufreq/armada-8k-cpufreq.c | 203 ++++++++++++++++++++++++++++ 3 files changed, 215 insertions(+) create mode 100644 drivers/cpufreq/armada-8k-cpufreq.c
drivers/cpufreq/Kconfig.arm +11 -0
@@ -25,6 +25,17 @@ config ARM_ARMADA_37XX_CPUFREQ This adds the CPUFreq driver support for Marvell Armada 37xx SoCs. The Armada 37xx PMU supports 4 frequency and VDD levels. +config ARM_ARMADA_8K_CPUFREQ + tristate "Armada 8K CPUFreq driver" + depends on ARCH_MVEBU && CPUFREQ_DT + help + This enables the CPUFreq driver support for Marvell + Armada8k SOCs. + Armada8K device has the AP806 which supports scaling + to any full integer divider. + + If in doubt, say N. + # big LITTLE core layer and glue drivers config ARM_BIG_LITTLE_CPUFREQ tristate "Generic ARM big LITTLE CPUfreq driver"
drivers/cpufreq/Makefile +1 -0
@@ -50,6 +50,7 @@ obj-$(CONFIG_X86_SFI_CPUFREQ) += sfi-cpufreq.o obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ) += arm_big_little.o obj-$(CONFIG_ARM_ARMADA_37XX_CPUFREQ) += armada-37xx-cpufreq.o +obj-$(CONFIG_ARM_ARMADA_8K_CPUFREQ) += armada-8k-cpufreq.o obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
drivers/cpufreq/armada-8k-cpufreq.c new file +203 -0
203 lines not on this page · raw message
Signature · 1 line
2.20.1
Gregory CLEMENT
maintainerPATCH v5 2/2 cpufreq: ap806: add cpufreq driver for Armada 8K
Add cpufreq driver for Marvell AP-806 found on Aramda 8K. The AP-806 has DFS (Dynamic Frequency Scaling) with coupled clock domain for two clusters, so this driver will directly use generic cpufreq-dt driver as backend.
Based on the work of Omri Itach <[email protected]>.
---
Hi,
This one is the correct version, in the previous one the change were not merged.
Sorry for the noise,
Gregory
drivers/cpufreq/Kconfig.arm | 11 ++ drivers/cpufreq/Makefile | 1 + drivers/cpufreq/armada-8k-cpufreq.c | 204 ++++++++++++++++++++++++++++ 3 files changed, 216 insertions(+) create mode 100644 drivers/cpufreq/armada-8k-cpufreq.c
drivers/cpufreq/Kconfig.arm +11 -0
@@ -25,6 +25,17 @@ config ARM_ARMADA_37XX_CPUFREQ This adds the CPUFreq driver support for Marvell Armada 37xx SoCs. The Armada 37xx PMU supports 4 frequency and VDD levels. +config ARM_ARMADA_8K_CPUFREQ + tristate "Armada 8K CPUFreq driver" + depends on ARCH_MVEBU && CPUFREQ_DT + help + This enables the CPUFreq driver support for Marvell + Armada8k SOCs. + Armada8K device has the AP806 which supports scaling + to any full integer divider. + + If in doubt, say N. + # big LITTLE core layer and glue drivers config ARM_BIG_LITTLE_CPUFREQ tristate "Generic ARM big LITTLE CPUfreq driver"
drivers/cpufreq/Makefile +1 -0
@@ -50,6 +50,7 @@ obj-$(CONFIG_X86_SFI_CPUFREQ) += sfi-cpufreq.o obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ) += arm_big_little.o obj-$(CONFIG_ARM_ARMADA_37XX_CPUFREQ) += armada-37xx-cpufreq.o +obj-$(CONFIG_ARM_ARMADA_8K_CPUFREQ) += armada-8k-cpufreq.o obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
drivers/cpufreq/armada-8k-cpufreq.c new file +204 -0
204 lines not on this page · raw message
Signature · 1 line
2.20.1
Quoted 4 lines · Gregory CLEMENT
Hi,
this is the fifth version of a the series adding the cpufreq support for the Marvell Armada 8K SoCs.
Applied. Thanks.
Signature · 1 line
viresh