ARM: dts: colibri: use valid range configuration for weim
Subsystems (2)
PATCH 1/1 ARM: dts: colibri: use valid range configuration for weim
A valid WEIM range configuration must specify range entries for all four chip selects. This fixes an error on boot:
imx-weim: probe of 21b8000.weim failed with error -22
Signed-off-by Stefan Agner <[email protected]>
--- arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +3 -2
@@ -238,10 +238,11 @@ &weim { status = "okay"; - /* weim memory map: 32MB on CS0, 32MB on CS1, 32MB on CS2 */ + /* weim memory map: 32MB on CS0, CS1, CS2 and CS3 */ ranges = <0 0 0x08000000 0x02000000 1 0 0x0a000000 0x02000000 - 2 0 0x0c000000 0x02000000>; + 2 0 0x0c000000 0x02000000 + 3 0 0x0e000000 0x02000000>; /* SRAM on Colibri nEXT_CS0 */ sram@0,0 {
Signature · 1 line
2.20.1
Shawn Guo
AppliedQuoted 5 lines · Stefan Agner
A valid WEIM range configuration must specify range entries for all four chip selects. This fixes an error on boot:
imx-weim: probe of 21b8000.weim failed with error -22Signed-off-by Stefan Agner <[email protected]>
Applied, thanks.