Skip to contentSkip to conversation

intel_iommu: misc fixes for error exposed after error_report_once()

PATCH In review Peter Xu 4 participants 9 messages Jan 16, 2019 – Jan 22, 2019

lore
Share & tools
lore

Peter Xu

author
#0 lore raw

v2 cover intel_iommu: misc fixes for error exposed after error_report_once()

v2:
- dropping the last vfio patch
- add acked-by for Jason on 1&2 patches

Recently we have switched quite a few VT-d trace points into error_report_once()s and this does expose some errors that we didn't detect before (previously tracepoints won't trigger as long as tracepoints weren't enabled). These errors are not severe in that all of them will not affect functionality of the guest otherwise we'll notice them even earlier. However it still worths to fix all of them. This patchset tries to fix quite a few errors like this.

All the errors could easily be triggered by rebooting a guest with both vfio-pci device and vIOMMU, and we can see errors dumped in stderr like:

qemu-kvm: vtd_iova_to_slpte: detected slpte permission error (iova=0xffd9ce00, level=0x2, slpte=0x0, write=1)
qemu-kvm: vtd_iommu_translate: detected translation failure (dev=02:00:00, iova=0x0)
qemu-kvm: vtd_interrupt_remap_msi: MSI address low 32 bit invalid: 0x0

Regarding to the patchset itself:

Patch 1:    fixes slpte permission error warning
Patch 2:    fixes intr_enabled flag reset missing
Patch 3-4:  fixes MSI translation warning

It was tested that this series can fix all the error messages observed in below bugs:

https://bugzilla.redhat.com/show_bug.cgi?id=1662270
https://bugzilla.redhat.com/show_bug.cgi?id=1662291

Please have a look, thanks.

Peter Xu (4):
intel_iommu: fix operator in vtd_switch_address_space
intel_iommu: reset intr_enabled when system reset pci/msi: export msi_is_masked()
i386/kvm: ignore masked irqs when update msi routes

 hw/i386/intel_iommu.c |  3 ++-
 hw/pci/msi.c          |  2 +-
 include/hw/pci/msi.h  |  1 +
 target/i386/kvm.c     | 14 +++++++++++---
 4 files changed, 15 insertions(+), 5 deletions(-)
Signature · 1 line
2.17.1
author
#1 lore raw

PATCH v2 1/4 intel_iommu: fix operator in vtd_switch_address_space

When calculating use_iommu, we wanted to first detect whether DMAR is enabled, then check whether PT is enabled if DMAR is enabled. However in the current code we used "&" rather than "&&" so the ordering requirement is lost (instead it'll be an "AND" operation). This could introduce errors dumped in QEMU console when rebooting a guest with both assigned device and vIOMMU, like:

qemu-system-x86_64: vtd_dev_to_context_entry: invalid root entry:
rsvd=0xf000ff53f000e2c3, val=0xf000ff53f000ff53 (reserved nonzero)

---
 hw/i386/intel_iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
hw/i386/intel_iommu.c +1 -1
index 8b72735650..6d5cc1d039 100644
@@ -1153,7 +1153,7 @@ static bool vtd_switch_address_space(VTDAddressSpace *as)
 
     assert(as);
 
-    use_iommu = as->iommu_state->dmar_enabled & !vtd_dev_pt_enabled(as);
+    use_iommu = as->iommu_state->dmar_enabled && !vtd_dev_pt_enabled(as);
 
     trace_vtd_switch_address_space(pci_bus_num(as->bus),
                                    VTD_PCI_SLOT(as->devfn),
Signature · 1 line
2.17.1
author
#2 lore raw

PATCH v2 2/4 intel_iommu: reset intr_enabled when system reset

In reply to Peter Xu

This is found when I was debugging another problem. Until now no bug is reported with this but we'd better reset the IR status correctly after a system reset.

---
 hw/i386/intel_iommu.c | 1 +
 1 file changed, 1 insertion(+)
hw/i386/intel_iommu.c +1 -0
index 6d5cc1d039..ee22e754f0 100644
@@ -3138,6 +3138,7 @@ static void vtd_init(IntelIOMMUState *s)
     s->root = 0;
     s->root_extended = false;
     s->dmar_enabled = false;
+    s->intr_enabled = false;
     s->iq_head = 0;
     s->iq_tail = 0;
     s->iq = 0;
Signature · 1 line
2.17.1
author
#3 lore raw

PATCH v2 3/4 pci/msi: export msi_is_masked()

In reply to Peter Xu

It is going to be used later on outside MSI code to detect whether one MSI vector is masked out.

---
 hw/pci/msi.c         | 2 +-
 include/hw/pci/msi.h | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)
hw/pci/msi.c +1 -1
index 5e05ce5ec2..47d2b0f33c 100644
@@ -286,7 +286,7 @@ void msi_reset(PCIDevice *dev)
     MSI_DEV_PRINTF(dev, "reset\n");
 }
 
-static bool msi_is_masked(const PCIDevice *dev, unsigned int vector)
+bool msi_is_masked(const PCIDevice *dev, unsigned int vector)
 {
     uint16_t flags = pci_get_word(dev->config + msi_flags_off(dev));
     uint32_t mask, data;
include/hw/pci/msi.h +1 -0
index 4837bcf490..8440eaee11 100644
@@ -39,6 +39,7 @@ int msi_init(struct PCIDevice *dev, uint8_t offset,
              bool msi_per_vector_mask, Error **errp);
 void msi_uninit(struct PCIDevice *dev);
 void msi_reset(PCIDevice *dev);
+bool msi_is_masked(const PCIDevice *dev, unsigned int vector);
 void msi_notify(PCIDevice *dev, unsigned int vector);
 void msi_send_message(PCIDevice *dev, MSIMessage msg);
 void msi_write_config(PCIDevice *dev, uint32_t addr, uint32_t val, int len);
Signature · 1 line
2.17.1
author
#4 lore raw

PATCH v2 4/4 i386/kvm: ignore masked irqs when update msi routes

In reply to Peter Xu

When we are with intel-iommu device and with IR on, KVM will register an IEC notifier to detect interrupt updates from the guest and we'll kick off kvm_update_msi_routes_all() when it happens to make sure kernel IRQ cache is matching the latest.

Though, kvm_update_msi_routes_all() is buggy in that it ignored the mask bit of either MSI/MSIX messages and it tries to translate the message even if the corresponding message was already masked by the guest driver (hence the MSI/MSIX message will be invalid).

Without this patch, we can receive an error message when we reboot a guest with both an assigned vfio-pci device and intel-iommu enabled:

qemu-system-x86_64: vtd_interrupt_remap_msi: MSI address low 32 bit invalid: 0x0

The error does not affect functionality of the guest since when we failed to translate we'll just silently continue (which makes sense since crashing the VM for this seems even worse), but still it's better to fix it up.

---
 target/i386/kvm.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)
target/i386/kvm.c +11 -3
index 9af4542fb8..beae1b99da 100644
@@ -3894,7 +3894,7 @@ static QLIST_HEAD(, MSIRouteEntry) msi_route_list = \
 static void kvm_update_msi_routes_all(void *private, bool global,
                                       uint32_t index, uint32_t mask)
 {
-    int cnt = 0;
+    int cnt = 0, vector;
     MSIRouteEntry *entry;
     MSIMessage msg;
     PCIDevice *dev;
@@ -3902,11 +3902,19 @@ static void kvm_update_msi_routes_all(void *private, bool global,
     /* TODO: explicit route update */
     QLIST_FOREACH(entry, &msi_route_list, list) {
         cnt++;
+        vector = entry->vector;
         dev = entry->dev;
-        if (!msix_enabled(dev) && !msi_enabled(dev)) {
+        if (msix_enabled(dev) && !msix_is_masked(dev, vector)) {
+            msg = msix_get_message(dev, vector);
+        } else if (msi_enabled(dev) && !msi_is_masked(dev, vector)) {
+            msg = msi_get_message(dev, vector);
+        } else {
+            /*
+             * Either MSI/MSIX is disabled for the device, or the
+             * specific message was masked out.  Skip this one.
+             */
             continue;
         }
-        msg = pci_get_msi_message(dev, entry->vector);
         kvm_irqchip_update_msi_route(kvm_state, entry->virq, msg, dev);
     }
     kvm_irqchip_commit_routes(kvm_state);
Signature · 1 line
2.17.1
#5 lore raw
In reply to Peter Xu
Patchew URL: https://patchew.org/QEMU/[email protected]/

Patchew URL: https://patchew.org/QEMU/[email protected]/

Hi,

This series failed the docker-mingw@fedora build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.

=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-mingw@fedora SHOW_ENV=1 J=14 === TEST SCRIPT END ===

CC hw/block/pflash_cfi01.o
In function 'acpi_table_install',

    inlined from 'acpi_table_add' at /tmp/qemu-test/src/hw/acpi/core.c:296:5:
/tmp/qemu-test/src/hw/acpi/core.c:184:9: error: 'strncpy' specified bound 4 equals destination size [-Werror=stringop-truncation]
         strncpy(ext_hdr->sig, hdrs->sig, sizeof ext_hdr->sig);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/qemu-test/src/hw/acpi/core.c:203:9: error: 'strncpy' specified bound 6 equals destination size [-Werror=stringop-truncation]
         strncpy(ext_hdr->oem_id, hdrs->oem_id, sizeof ext_hdr->oem_id);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/qemu-test/src/hw/acpi/core.c:207:9: error: 'strncpy' specified bound 8 equals destination size [-Werror=stringop-truncation]
         strncpy(ext_hdr->oem_table_id, hdrs->oem_table_id,
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                 sizeof ext_hdr->oem_table_id);
                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/qemu-test/src/hw/acpi/core.c:216:9: error: 'strncpy' specified bound 4 equals destination size [-Werror=stringop-truncation]
         strncpy(ext_hdr->asl_compiler_id, hdrs->asl_compiler_id,
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                 sizeof ext_hdr->asl_compiler_id);

---
make: *** [/tmp/qemu-test/src/rules.mak:69: hw/acpi/core.o] Error 1
make: *** Waiting for unfinished jobs....
/tmp/qemu-test/src/block/sheepdog.c: In function 'find_vdi_name':
/tmp/qemu-test/src/block/sheepdog.c:1239:5: error: 'strncpy' specified bound 256 equals destination size [-Werror=stringop-truncation]

     strncpy(buf + SD_MAX_VDI_LEN, tag, SD_MAX_VDI_TAG_LEN);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

cc1: all warnings being treated as errors
make: *** [/tmp/qemu-test/src/rules.mak:69: block/sheepdog.o] Error 1
/tmp/qemu-test/src/hw/acpi/aml-build.c: In function 'build_header':
/tmp/qemu-test/src/hw/acpi/aml-build.c:1535:9: error: 'strncpy' specified bound 6 equals destination size [-Werror=stringop-truncation]

         strncpy((char *)h->oem_id, oem_id, sizeof h->oem_id);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/qemu-test/src/hw/acpi/aml-build.c:1541:9: error: 'strncpy' specified bound 8 equals destination size [-Werror=stringop-truncation]
         strncpy((char *)h->oem_table_id, oem_table_id, sizeof(h->oem_table_id));
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

cc1: all warnings being treated as errors

The full log is available at
http://patchew.org/logs/[email protected]/testing.docker-mingw@fedora/?type=message.
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to [email protected]

author
#6 lore raw
Quoted 44 lines · On Mon, Jan 21, 2019 at 12:32:07AM -0800, [email protected] wrote:

Patchew URL: https://patchew.org/QEMU/[email protected]/

Hi,

This series failed the docker-mingw@fedora build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.

=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-mingw@fedora SHOW_ENV=1 J=14 === TEST SCRIPT END ===

CC hw/block/pflash_cfi01.o
In function 'acpi_table_install',

    inlined from 'acpi_table_add' at /tmp/qemu-test/src/hw/acpi/core.c:296:5:
/tmp/qemu-test/src/hw/acpi/core.c:184:9: error: 'strncpy' specified bound 4 equals destination size [-Werror=stringop-truncation]
         strncpy(ext_hdr->sig, hdrs->sig, sizeof ext_hdr->sig);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/qemu-test/src/hw/acpi/core.c:203:9: error: 'strncpy' specified bound 6 equals destination size [-Werror=stringop-truncation]
         strncpy(ext_hdr->oem_id, hdrs->oem_id, sizeof ext_hdr->oem_id);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/qemu-test/src/hw/acpi/core.c:207:9: error: 'strncpy' specified bound 8 equals destination size [-Werror=stringop-truncation]
         strncpy(ext_hdr->oem_table_id, hdrs->oem_table_id,
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                 sizeof ext_hdr->oem_table_id);
                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/qemu-test/src/hw/acpi/core.c:216:9: error: 'strncpy' specified bound 4 equals destination size [-Werror=stringop-truncation]
         strncpy(ext_hdr->asl_compiler_id, hdrs->asl_compiler_id,
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                 sizeof ext_hdr->asl_compiler_id);

---
make: *** [/tmp/qemu-test/src/rules.mak:69: hw/acpi/core.o] Error 1
make: *** Waiting for unfinished jobs....
/tmp/qemu-test/src/block/sheepdog.c: In function 'find_vdi_name':
/tmp/qemu-test/src/block/sheepdog.c:1239:5: error: 'strncpy' specified bound 256 equals destination size [-Werror=stringop-truncation]

     strncpy(buf + SD_MAX_VDI_LEN, tag, SD_MAX_VDI_TAG_LEN);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

cc1: all warnings being treated as errors
make: *** [/tmp/qemu-test/src/rules.mak:69: block/sheepdog.o] Error 1
/tmp/qemu-test/src/hw/acpi/aml-build.c: In function 'build_header':
/tmp/qemu-test/src/hw/acpi/aml-build.c:1535:9: error: 'strncpy' specified bound 6 equals destination size [-Werror=stringop-truncation]

Quoted 6 lines
         strncpy((char *)h->oem_id, oem_id, sizeof h->oem_id);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/qemu-test/src/hw/acpi/aml-build.c:1541:9: error: 'strncpy' specified bound 8 equals destination size [-Werror=stringop-truncation]
         strncpy((char *)h->oem_table_id, oem_table_id, sizeof(h->oem_table_id));
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

cc1: all warnings being treated as errors

I'm uncertain about these errors but it seems to be more likely to be caused by some configuration or compiler change instead of the series itself since this series never changed either acpi or sheepdog code. So I'll temporarily ignore them...

Regards,

Signature · 1 line
Peter Xu
#7 lore raw
Quoted 52 lines · Peter Xu
Quoted 44 lines · On Mon, Jan 21, 2019 at 12:32:07AM -0800, [email protected] wrote:

Patchew URL: https://patchew.org/QEMU/[email protected]/

Hi,

This series failed the docker-mingw@fedora build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.

=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-mingw@fedora SHOW_ENV=1 J=14 === TEST SCRIPT END ===

CC hw/block/pflash_cfi01.o
In function 'acpi_table_install',

    inlined from 'acpi_table_add' at /tmp/qemu-test/src/hw/acpi/core.c:296:5:
/tmp/qemu-test/src/hw/acpi/core.c:184:9: error: 'strncpy' specified bound 4 equals destination size [-Werror=stringop-truncation]
         strncpy(ext_hdr->sig, hdrs->sig, sizeof ext_hdr->sig);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/qemu-test/src/hw/acpi/core.c:203:9: error: 'strncpy' specified bound 6 equals destination size [-Werror=stringop-truncation]
         strncpy(ext_hdr->oem_id, hdrs->oem_id, sizeof ext_hdr->oem_id);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/qemu-test/src/hw/acpi/core.c:207:9: error: 'strncpy' specified bound 8 equals destination size [-Werror=stringop-truncation]
         strncpy(ext_hdr->oem_table_id, hdrs->oem_table_id,
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                 sizeof ext_hdr->oem_table_id);
                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/qemu-test/src/hw/acpi/core.c:216:9: error: 'strncpy' specified bound 4 equals destination size [-Werror=stringop-truncation]
         strncpy(ext_hdr->asl_compiler_id, hdrs->asl_compiler_id,
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                 sizeof ext_hdr->asl_compiler_id);

---
make: *** [/tmp/qemu-test/src/rules.mak:69: hw/acpi/core.o] Error 1
make: *** Waiting for unfinished jobs....
/tmp/qemu-test/src/block/sheepdog.c: In function 'find_vdi_name':
/tmp/qemu-test/src/block/sheepdog.c:1239:5: error: 'strncpy' specified bound 256 equals destination size [-Werror=stringop-truncation]

     strncpy(buf + SD_MAX_VDI_LEN, tag, SD_MAX_VDI_TAG_LEN);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

cc1: all warnings being treated as errors
make: *** [/tmp/qemu-test/src/rules.mak:69: block/sheepdog.o] Error 1
/tmp/qemu-test/src/hw/acpi/aml-build.c: In function 'build_header':
/tmp/qemu-test/src/hw/acpi/aml-build.c:1535:9: error: 'strncpy' specified bound 6 equals destination size [-Werror=stringop-truncation]

Quoted 6 lines
         strncpy((char *)h->oem_id, oem_id, sizeof h->oem_id);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/qemu-test/src/hw/acpi/aml-build.c:1541:9: error: 'strncpy' specified bound 8 equals destination size [-Werror=stringop-truncation]
         strncpy((char *)h->oem_table_id, oem_table_id, sizeof(h->oem_table_id));
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

cc1: all warnings being treated as errors

Quoted 4 lines

I'm uncertain about these errors but it seems to be more likely to be caused by some configuration or compiler change instead of the series itself since this series never changed either acpi or sheepdog code. So I'll temporarily ignore them...

I am getting these too and I do not touch the mentioned files and folders ever.

Signature · 1 line
Alexey
#8 lore raw
Quoted 55 lines · Alexey Kardashevskiy
Quoted 52 lines · Peter Xu
Quoted 50 lines · On Mon, Jan 21, 2019 at 12:32:07AM -0800, [email protected] wrote:

Patchew URL: https://patchew.org/QEMU/[email protected]/

Hi,

This series failed the docker-mingw@fedora build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.

=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-mingw@fedora SHOW_ENV=1 J=14 === TEST SCRIPT END ===

CC hw/block/pflash_cfi01.o
In function 'acpi_table_install',

    inlined from 'acpi_table_add' at /tmp/qemu-test/src/hw/acpi/core.c:296:5:
/tmp/qemu-test/src/hw/acpi/core.c:184:9: error: 'strncpy' specified bound 4 equals destination size [-Werror=stringop-truncation]
         strncpy(ext_hdr->sig, hdrs->sig, sizeof ext_hdr->sig);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/qemu-test/src/hw/acpi/core.c:203:9: error: 'strncpy' specified bound 6 equals destination size [-Werror=stringop-truncation]
         strncpy(ext_hdr->oem_id, hdrs->oem_id, sizeof ext_hdr->oem_id);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/qemu-test/src/hw/acpi/core.c:207:9: error: 'strncpy' specified bound 8 equals destination size [-Werror=stringop-truncation]
         strncpy(ext_hdr->oem_table_id, hdrs->oem_table_id,
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                 sizeof ext_hdr->oem_table_id);
                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/qemu-test/src/hw/acpi/core.c:216:9: error: 'strncpy' specified bound 4 equals destination size [-Werror=stringop-truncation]
         strncpy(ext_hdr->asl_compiler_id, hdrs->asl_compiler_id,
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                 sizeof ext_hdr->asl_compiler_id);

---
make: *** [/tmp/qemu-test/src/rules.mak:69: hw/acpi/core.o] Error 1
make: *** Waiting for unfinished jobs....
/tmp/qemu-test/src/block/sheepdog.c: In function 'find_vdi_name':
/tmp/qemu-test/src/block/sheepdog.c:1239:5: error: 'strncpy' specified bound 256 equals destination size [-Werror=stringop-truncation]

     strncpy(buf + SD_MAX_VDI_LEN, tag, SD_MAX_VDI_TAG_LEN);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

cc1: all warnings being treated as errors
make: *** [/tmp/qemu-test/src/rules.mak:69: block/sheepdog.o] Error 1
/tmp/qemu-test/src/hw/acpi/aml-build.c: In function 'build_header':
/tmp/qemu-test/src/hw/acpi/aml-build.c:1535:9: error: 'strncpy' specified bound 6 equals destination size [-Werror=stringop-truncation]

         strncpy((char *)h->oem_id, oem_id, sizeof h->oem_id);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/qemu-test/src/hw/acpi/aml-build.c:1541:9: error: 'strncpy' specified bound 8 equals destination size [-Werror=stringop-truncation]
         strncpy((char *)h->oem_table_id, oem_table_id, sizeof(h->oem_table_id));
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

cc1: all warnings being treated as errors

Quoted 13 lines
Quoted 4 lines

I'm uncertain about these errors but it seems to be more likely to be caused by some configuration or compiler change instead of the series itself since this series never changed either acpi or sheepdog code. So I'll temporarily ignore them...

I am getting these too and I do not touch the mentioned files and folders ever.

Signature · 1 line
Alexey

You want 9cbb8eca1729eab1123847e37454975bb555008a I think.

Signature · 1 line
MST