ARM: dts: am335x-shc.dts: small updates for shc board
cover ARM: dts: am335x-shc.dts: small updates for shc board
small updates for am335x based shc board:
- switch DTS to SPDX identifier
- fix wrong gpio level for mmc1 cd pin
Heiko Schocher (2):
ARM: dts: am335x-shc.dts: Switch to SPDX identifier
ARM: dts: am335x-shc.dts: fix wrong cd pin level
arch/arm/boot/dts/am335x-shc.dts | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
Signature · 1 line
2.17.2
PATCH 1/2 ARM: dts: am335x-shc.dts: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance management.
---
arch/arm/boot/dts/am335x-shc.dts | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
arch/arm/boot/dts/am335x-shc.dts +1 -3
@@ -1,11 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * support for the bosch am335x based shc c3 board * * Copyright, C) 2015 Heiko Schocher <[email protected]> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/;
Signature · 1 line
2.17.2
Re: [PATCH v1 1/2] ARM: dts: am335x-shc.dts: Switch to SPDX identifier
Quoted 2 lines · Heiko Schocher
Adopt the SPDX license identifier headers to ease license compliance management.
Applying into omap-for-v5.1/dt thanks.
Tony
PATCH 2/2 ARM: dts: am335x-shc.dts: fix wrong cd pin level
In reply to Heiko Schochercd pin on mmc1 is GPIO_ACTIVE_LOW not GPIO_ACTIVE_HIGH
---
arch/arm/boot/dts/am335x-shc.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/am335x-shc.dts +1 -1
@@ -213,7 +213,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; bus-width = <0x4>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; cd-inverted; max-frequency = <26000000>; vmmc-supply = <&vmmcsd_fixed>;
Signature · 1 line
2.17.2
Re: [PATCH v1 2/2] ARM: dts: am335x-shc.dts: fix wrong cd pin level
Quoted 1 line · Heiko Schocher
cd pin on mmc1 is
GPIO_ACTIVE_LOWnotGPIO_ACTIVE_HIGH
Thanks applying into omap-for-v5.0/fixes.
Tony