dmaengine: usage of dmaengine_get() and dma_find_channel()
Hello,
I am a bit puzzle about the proper usage these two functions:
void dmaengine_get(void)
struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type)
Looking into the kernel sources dma_find_channel is not used, despite the fact that it looks as one of the suggested mechanism to access a DMA engine. So, I cannot find a valid example of its usage.
The same for dmaengine_get(). On the other hand, at least this function is used in: drivers/video/fbdev/mx3fb.c. But I believe that its usage is wrong because it uses: dmaengine_get() + dma_request_channel(), instead of dmaengine_get() + dma_find_channel().
Reading the code my understanding is that dmaengine_get() + dma_find_channel() should be used for "public" (not private) DMA engine channels.
It's here where things are getting obscure to me. My understanding is that DMA channels which are not private can be used by several drivers at the same time. In principle they submit all their transfers and the DMA engine will process them and then the DMA engine will notify the drivers about their completion.
My understanding is also that the dmaengine subsystem assumes that "public" channels of the same type are interchangeable.
In my use case I wrote a DMA engine which is specific for a subset of driver, and it cannot be used by others (so is sharable among a group of drivers). All these drivers, potentially, they can submit their transfers to the DMA engine in parallel; but I cannot do it because I'm forced to use dma_request_channel() in order to be able to filter the DMA channels, and this will make automatically the channel PRIVATE which prevents other drivers to use the same channel.
With the current API I do not see alternative for me. I have to use dma_request_channel() in order to filter DMA channels. But I am wondering if it make sense for you, and if it does, is there a solution today? Or, is it possibile to design one?
Thanks (I do not know if this message is clear enough)
Quoted 16 lines · Federico Vaga
Hello,
I am a bit puzzle about the proper usage these two functions:
void
dmaengine_get(void)
structdma_chan*dma_find_channel(enumdma_transaction_typetx_type)Looking into the kernel sources
dma_find_channelis not used, despite the fact that it looks as one of the suggested mechanism to access a DMA engine. So, I cannot find a valid example of its usage.The same for
dmaengine_get(). On the other hand, at least this function is used in:drivers/video/fbdev/mx3fb.c. But I believe that its usage is wrong because it uses:dmaengine_get()+dma_request_channel(), instead ofdmaengine_get()+dma_find_channel().
Quoted 8 lines
Reading the code my understanding is that
dmaengine_get()+dma_find_channel()should be used for "public" (not private) DMA engine channels.It's here where things are getting obscure to me. My understanding is that DMA channels which are not private can be used by several drivers at the same time. In principle they submit all their transfers and the DMA engine will process them and then the DMA engine will notify the drivers about their completion.
The concept of public channel is a channel capable of doing any dma transfer for example a system dmaengine capable of flipping bits from system memory to memory/devices.
For peripherals, we cannot do a generic transfer and the transfer is specific given a set of parameters for it to work, thus the channel is private... These channels can be used by many users as long as that is supported by engine. In an idle world, the dmaengine should have N channels and provide M software channels and lets users use them and schedule these for best throughput, we are not there yet :(
Quoted 10 lines
My understanding is also that the dmaengine subsystem assumes that "public" channels of the same type are interchangeable.
In my use case I wrote a DMA engine which is specific for a subset of driver, and it cannot be used by others (so is sharable among a group of drivers). All these drivers, potentially, they can submit their transfers to the DMA engine in parallel; but I cannot do it because I'm forced to use
dma_request_channel()in order to be able to filter the DMA channels, and this will make automatically the channel PRIVATE which prevents other drivers to use the same channel.
Please use virtual channels for that, clients can use virtual channels and they can be submitted to a hardware channel.
Quoted 7 lines
With the current API I do not see alternative for me. I have to use
dma_request_channel()in order to filter DMA channels. But I am wondering if it make sense for you, and if it does, is there a solution today? Or, is it possibile to design one?Thanks (I do not know if this message is clear enough)
Signature · 1 line
~Vinod
Thanks for your suggestion
Quoted 61 lines · CET Vinod Koul
Quoted 21 lines · Federico Vaga
Hello,
I am a bit puzzle about the proper usage these two functions:
void
dmaengine_get(void)
structdma_chan*dma_find_channel(enumdma_transaction_typetx_type)Looking into the kernel sources
dma_find_channelis not used, despite the fact that it looks as one of the suggested mechanism to access a DMA engine. So, I cannot find a valid example of its usage.The same for
dmaengine_get(). On the other hand, at least this function is used in:drivers/video/fbdev/mx3fb.c. But I believe that its usage is wrong
because it uses:dmaengine_get()+dma_request_channel(), instead ofdmaengine_get()+dma_find_channel().Reading the code my understanding is that
dmaengine_get()+dma_find_channel()should be used for "public" (not private) DMA engine channels.Quoted 5 lines
It's here where things are getting obscure to me. My understanding is that DMA channels which are not private can be used by several drivers at the same time. In principle they submit all their transfers and the DMA engine will process them and then the DMA engine will notify the drivers about their completion.
The concept of public channel is a channel capable of doing any dma transfer for example a system dmaengine capable of flipping bits from system memory to memory/devices.
For peripherals, we cannot do a generic transfer and the transfer is specific given a set of parameters for it to work, thus the channel is private... These channels can be used by many users as long as that is supported by engine. In an idle world, the dmaengine should have N channels and provide M software channels and lets users use them and schedule these for best throughput, we are not there yet :(
Quoted 4 lines
My understanding is also that the dmaengine subsystem assumes that "public"
channels of the same type are interchangeable.Quoted 8 lines
In my use case I wrote a DMA engine which is specific for a subset of driver, and it cannot be used by others (so is sharable among a group of drivers). All these drivers, potentially, they can submit their transfers to the DMA engine in parallel; but I cannot do it because I'm forced to use
dma_request_channel()in order to be able to filter the DMA channels, and this will make automatically the channel PRIVATE which prevents other drivers to use the same channel.Please use virtual channels for that, clients can use virtual channels and they can be submitted to a hardware channel.
Quoted 6 lines
With the current API I do not see alternative for me. I have to use
dma_request_channel()in order to filter DMA channels. But I am wondering if it make sense for you, and if it does, is there a solution today? Or, is it possibile to design one?Thanks (I do not know if this message is clear enough)