Skip to contentSkip to conversation

audio: rework driver probing.

PATCH In review Gerd Hoffmann 2 participants 9 messages Jan 24, 2019

lore
Share & tools
lore
#0 lore raw

v3 cover audio: rework driver probing.

v3:
* drop pa driver for *bsd.
* codestyle fixes.

Gerd Hoffmann (6):
audio: use pkg-config
audio: allow optional audio drivers.
audio: use try-sdl for openbsd
audio: check for pulseaudio daemon pidfile
audio: error message tweak
audio: probe audio drivers by default

 configure       | 81 ++++++++++++++++++++++++++++++++-------------------------
 audio/audio.c   | 12 +++++----
 audio/paaudio.c | 15 +++++++++++
 3 files changed, 67 insertions(+), 41 deletions(-)
Signature · 1 line
2.9.3
#1 lore raw

PATCH v3 1/6 audio: use pkg-config

Use pkg-config to probe for alsa and pulseaudio.

---
 configure | 39 +++++++++++++--------------------------
 1 file changed, 13 insertions(+), 26 deletions(-)
configure +13 -26
index 8f312ac3e2..5fcd0f4795 100755
@@ -3342,39 +3342,26 @@ fi
 ##########################################
 # Sound support libraries probe
 
-audio_drv_probe()
-{
-    drv=$1
-    hdr=$2
-    lib=$3
-    exp=$4
-    cfl=$5
-        cat > $TMPC << EOF
-#include <$hdr>
-int main(void) { $exp }
-EOF
-    if compile_prog "$cfl" "$lib" ; then
-        :
-    else
-        error_exit "$drv check failed" \
-            "Make sure to have the $drv libs and headers installed."
-    fi
-}
-
 audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/,/ /g')
 for drv in $audio_drv_list; do
     case $drv in
     alsa)
-    audio_drv_probe $drv alsa/asoundlib.h -lasound \
-        "return snd_pcm_close((snd_pcm_t *)0);"
-    alsa_libs="-lasound"
+    if $pkg_config alsa --exists; then
+        alsa_libs=$($pkg_config alsa --libs)
+    else
+        error_exit "$drv check failed" \
+            "Make sure to have the $drv libs and headers installed."
+    fi
     ;;
 
     pa)
-    audio_drv_probe $drv pulse/pulseaudio.h "-lpulse" \
-        "pa_context_set_source_output_volume(NULL, 0, NULL, NULL, NULL); return 0;"
-    pulse_libs="-lpulse"
-    audio_pt_int="yes"
+    if $pkg_config libpulse --exists; then
+        pulse_libs=$($pkg_config libpulse --libs)
+        audio_pt_int="yes"
+    else
+        error_exit "$drv check failed" \
+            "Make sure to have the $drv libs and headers installed."
+    fi
     ;;
 
     sdl)
Signature · 1 line
2.9.3
Reviewed-by on v3 1/6
#2 lore raw

Re: [Qemu-devel] [PATCH v3 1/6] audio: use pkg-config

Quoted 3 lines · Gerd Hoffmann

Use pkg-config to probe for alsa and pulseaudio.

Quoted 62 lines
---
 configure | 39 +++++++++++++--------------------------
 1 file changed, 13 insertions(+), 26 deletions(-)
configure +13 -26
index 8f312ac3e2..5fcd0f4795 100755
@@ -3342,39 +3342,26 @@ fi
 ##########################################
 # Sound support libraries probe
 
-audio_drv_probe()
-{
-    drv=$1
-    hdr=$2
-    lib=$3
-    exp=$4
-    cfl=$5
-        cat > $TMPC << EOF
-#include <$hdr>
-int main(void) { $exp }
-EOF
-    if compile_prog "$cfl" "$lib" ; then
-        :
-    else
-        error_exit "$drv check failed" \
-            "Make sure to have the $drv libs and headers installed."
-    fi
-}
-
 audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/,/ /g')
 for drv in $audio_drv_list; do
     case $drv in
     alsa)
-    audio_drv_probe $drv alsa/asoundlib.h -lasound \
-        "return snd_pcm_close((snd_pcm_t *)0);"
-    alsa_libs="-lasound"
+    if $pkg_config alsa --exists; then
+        alsa_libs=$($pkg_config alsa --libs)
+    else
+        error_exit "$drv check failed" \
+            "Make sure to have the $drv libs and headers installed."
+    fi
     ;;
 
     pa)
-    audio_drv_probe $drv pulse/pulseaudio.h "-lpulse" \
-        "pa_context_set_source_output_volume(NULL, 0, NULL, NULL, NULL); return 0;"
-    pulse_libs="-lpulse"
-    audio_pt_int="yes"
+    if $pkg_config libpulse --exists; then
+        pulse_libs=$($pkg_config libpulse --libs)
+        audio_pt_int="yes"
+    else
+        error_exit "$drv check failed" \
+            "Make sure to have the $drv libs and headers installed."
+    fi
     ;;
 
     sdl)
#3 lore raw

PATCH v3 2/6 audio: allow optional audio drivers.

In reply to Gerd Hoffmann

For those audio drivers which can be probed (sdl, alsa, pulse) add a try-$name variants. Unlike the variants without try- prefix they will not error out on probe failure, the driver will be dropped from the list instead. Mainly useful for the audio_drv_list default values.

---
 configure | 34 ++++++++++++++++++++++++++++------
 1 file changed, 28 insertions(+), 6 deletions(-)
configure +28 -6
index 5fcd0f4795..6a2aa3b533 100755
@@ -3345,22 +3345,36 @@ fi
 audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/,/ /g')
 for drv in $audio_drv_list; do
     case $drv in
-    alsa)
+    alsa | try-alsa)
     if $pkg_config alsa --exists; then
         alsa_libs=$($pkg_config alsa --libs)
+        if test "$drv" = "try-alsa"; then
+            audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-alsa/alsa/')
+        fi
     else
-        error_exit "$drv check failed" \
-            "Make sure to have the $drv libs and headers installed."
+        if test "$drv" = "try-alsa"; then
+            audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-alsa//')
+        else
+            error_exit "$drv check failed" \
+                "Make sure to have the $drv libs and headers installed."
+        fi
     fi
     ;;
 
-    pa)
+    pa | try-pa)
     if $pkg_config libpulse --exists; then
         pulse_libs=$($pkg_config libpulse --libs)
         audio_pt_int="yes"
+        if test "$drv" = "try-pa"; then
+            audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-pa/pa/')
+        fi
     else
-        error_exit "$drv check failed" \
-            "Make sure to have the $drv libs and headers installed."
+        if test "$drv" = "try-pa"; then
+            audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-pa//')
+        else
+            error_exit "$drv check failed" \
+                "Make sure to have the $drv libs and headers installed."
+        fi
     fi
     ;;
 
@@ -3370,6 +3384,14 @@ for drv in $audio_drv_list; do
     fi
     ;;
 
+    try-sdl)
+    if test "$sdl" = "no"; then
+        audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-sdl//')
+    else
+        audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-sdl/sdl/')
+    fi
+    ;;
+
     coreaudio)
       coreaudio_libs="-framework CoreAudio"
     ;;
Signature · 1 line
2.9.3
#4 lore raw

PATCH v3 3/6 audio: use try-sdl for openbsd

In reply to Gerd Hoffmann

Fixes the openbsd build failure with SDL disabled.

---
 configure | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
configure +1 -1
index 6a2aa3b533..1eff5946f6 100755
@@ -829,7 +829,7 @@ NetBSD)
 OpenBSD)
   bsd="yes"
   make="${MAKE-gmake}"
-  audio_drv_list="sdl"
+  audio_drv_list="try-sdl"
   audio_possible_drivers="sdl"
   HOST_VARIANT_DIR="openbsd"
   supported_os="yes"
Signature · 1 line
2.9.3
#5 lore raw

PATCH v3 4/6 audio: check for pulseaudio daemon pidfile

In reply to Gerd Hoffmann

Check whenever the pulseaudio daemon pidfile is present before trying to initialize the pulseaudio backend. Just return NULL if that is not the case, so qemu will check the next backend in line.

In case the user explicitly configured a non-default pulseaudio server skip the check.

---
 audio/paaudio.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
audio/paaudio.c +15 -0
index 4c100bc318..6153b908da 100644
@@ -814,6 +814,21 @@ static PAConf glob_conf = {
 
 static void *qpa_audio_init (void)
 {
+    if (glob_conf.server == NULL) {
+        char pidfile[64];
+        char *runtime;
+        struct stat st;
+
+        runtime = getenv("XDG_RUNTIME_DIR");
+        if (!runtime) {
+            return NULL;
+        }
+        snprintf(pidfile, sizeof(pidfile), "%s/pulse/pid", runtime);
+        if (stat(pidfile, &st) != 0) {
+            return NULL;
+        }
+    }
+
     paaudio *g = g_malloc(sizeof(paaudio));
     g->conf = glob_conf;
     g->mainloop = NULL;
Signature · 1 line
2.9.3
#6 lore raw

PATCH v3 5/6 audio: error message tweak

In reply to Gerd Hoffmann

Only print a message about the failed driver initialization in case it was the driver explicitly requested by the user via QEMU_AUDIO_DRV=$drv.

---
 audio/audio.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
audio/audio.c +7 -5
index 1ace47f510..d163ffbc88 100644
@@ -1762,7 +1762,7 @@ void AUD_help (void)
         );
 }
 
-static int audio_driver_init (AudioState *s, struct audio_driver *drv)
+static int audio_driver_init(AudioState *s, struct audio_driver *drv, bool msg)
 {
     if (drv->options) {
         audio_process_options (drv->name, drv->options);
@@ -1776,7 +1776,9 @@ static int audio_driver_init (AudioState *s, struct audio_driver *drv)
         return 0;
     }
     else {
-        dolog ("Could not init `%s' audio driver\n", drv->name);
+        if (msg) {
+            dolog("Could not init `%s' audio driver\n", drv->name);
+        }
         return -1;
     }
 }
@@ -1901,7 +1903,7 @@ static void audio_init (void)
     if (drvname) {
         driver = audio_driver_lookup(drvname);
         if (driver) {
-            done = !audio_driver_init(s, driver);
+            done = !audio_driver_init(s, driver, true);
         } else {
             dolog ("Unknown audio driver `%s'\n", drvname);
             dolog ("Run with -audio-help to list available drivers\n");
@@ -1912,14 +1914,14 @@ static void audio_init (void)
         for (i = 0; !done && i < ARRAY_SIZE(audio_prio_list); i++) {
             driver = audio_driver_lookup(audio_prio_list[i]);
             if (driver && driver->can_be_default) {
-                done = !audio_driver_init(s, driver);
+                done = !audio_driver_init(s, driver, false);
             }
         }
     }
 
     if (!done) {
         driver = audio_driver_lookup("none");
-        done = !audio_driver_init(s, driver);
+        done = !audio_driver_init(s, driver, false);
         assert(done);
         dolog("warning: Using timer based audio emulation\n");
     }
Signature · 1 line
2.9.3
Reviewed-by on v3 5/6
#7 lore raw

Re: [Qemu-devel] [PATCH v3 5/6] audio: error message tweak

Quoted 4 lines · Gerd Hoffmann

Only print a message about the failed driver initialization in case it was the driver explicitly requested by the user via QEMU_AUDIO_DRV=$drv.

Quoted 55 lines
---
 audio/audio.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
audio/audio.c +7 -5
index 1ace47f510..d163ffbc88 100644
@@ -1762,7 +1762,7 @@ void AUD_help (void)
         );
 }
 
-static int audio_driver_init (AudioState *s, struct audio_driver *drv)
+static int audio_driver_init(AudioState *s, struct audio_driver *drv, bool msg)
 {
     if (drv->options) {
         audio_process_options (drv->name, drv->options);
@@ -1776,7 +1776,9 @@ static int audio_driver_init (AudioState *s, struct audio_driver *drv)
         return 0;
     }
     else {
-        dolog ("Could not init `%s' audio driver\n", drv->name);
+        if (msg) {
+            dolog("Could not init `%s' audio driver\n", drv->name);
+        }
         return -1;
     }
 }
@@ -1901,7 +1903,7 @@ static void audio_init (void)
     if (drvname) {
         driver = audio_driver_lookup(drvname);
         if (driver) {
-            done = !audio_driver_init(s, driver);
+            done = !audio_driver_init(s, driver, true);
         } else {
             dolog ("Unknown audio driver `%s'\n", drvname);
             dolog ("Run with -audio-help to list available drivers\n");
@@ -1912,14 +1914,14 @@ static void audio_init (void)
         for (i = 0; !done && i < ARRAY_SIZE(audio_prio_list); i++) {
             driver = audio_driver_lookup(audio_prio_list[i]);
             if (driver && driver->can_be_default) {
-                done = !audio_driver_init(s, driver);
+                done = !audio_driver_init(s, driver, false);
             }
         }
     }
 
     if (!done) {
         driver = audio_driver_lookup("none");
-        done = !audio_driver_init(s, driver);
+        done = !audio_driver_init(s, driver, false);
         assert(done);
         dolog("warning: Using timer based audio emulation\n");
     }
#8 lore raw

PATCH v3 6/6 audio: probe audio drivers by default

In reply to Gerd Hoffmann

Add the drivers listed in audio_possible_drivers to audio_drv_list, using the try-* variants. That way the probable drivers are compiled by default if possible.

Additioal tweaks:
linux: reorder to: pa alsa sdl oss.
*bsd: drop pa.

---
 configure | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
configure +7 -7
index 1eff5946f6..b18281c61f 100755
@@ -794,13 +794,13 @@ MINGW32*)
 ;;
 GNU/kFreeBSD)
   bsd="yes"
-  audio_drv_list="oss"
+  audio_drv_list="oss try-sdl"
   audio_possible_drivers="oss sdl pa"
 ;;
 FreeBSD)
   bsd="yes"
   make="${MAKE-gmake}"
-  audio_drv_list="oss"
+  audio_drv_list="oss try-sdl"
   audio_possible_drivers="oss sdl pa"
   # needed for kinfo_getvmmap(3) in libutil.h
   LIBS="-lutil $LIBS"
@@ -813,14 +813,14 @@ FreeBSD)
 DragonFly)
   bsd="yes"
   make="${MAKE-gmake}"
-  audio_drv_list="oss"
+  audio_drv_list="oss try-sdl"
   audio_possible_drivers="oss sdl pa"
   HOST_VARIANT_DIR="dragonfly"
 ;;
 NetBSD)
   bsd="yes"
   make="${MAKE-gmake}"
-  audio_drv_list="oss"
+  audio_drv_list="oss try-sdl"
   audio_possible_drivers="oss sdl"
   oss_lib="-lossaudio"
   HOST_VARIANT_DIR="netbsd"
@@ -845,7 +845,7 @@ Darwin)
     LDFLAGS="-arch x86_64 $LDFLAGS"
   fi
   cocoa="yes"
-  audio_drv_list="coreaudio"
+  audio_drv_list="coreaudio try-sdl"
   audio_possible_drivers="coreaudio sdl"
   LDFLAGS="-framework CoreFoundation -framework IOKit $LDFLAGS"
   libs_softmmu="-F/System/Library/Frameworks -framework Cocoa -framework IOKit $libs_softmmu"
@@ -861,7 +861,7 @@ SunOS)
   install="${INSTALL-ginstall}"
   smbd="${SMBD-/usr/sfw/sbin/smbd}"
   if test -f /usr/include/sys/soundcard.h ; then
-    audio_drv_list="oss"
+    audio_drv_list="oss try-sdl"
   fi
   audio_possible_drivers="oss sdl"
 # needed for CMSG_ macros in sys/socket.h
@@ -879,7 +879,7 @@ Haiku)
   LIBS="-lposix_error_mapper -lnetwork $LIBS"
 ;;
 Linux)
-  audio_drv_list="oss"
+  audio_drv_list="try-pa try-alsa try-sdl oss"
   audio_possible_drivers="oss alsa sdl pa"
   linux="yes"
   linux_user="yes"
Signature · 1 line
2.9.3