ARC: [scripted] fix node name and address spelling
PATCH v2 1/1 ARC: [scripted] fix node name and address spelling
From: Alexey Brodkin <[email protected]>
1. Remove "0x" prefix from unit-address of node names ----------------------->8------------------------ sed -i 's/@0x/@/g' arch/arc/boot/dts/*.dts* ----------------------->8------------------------
2. Make all hex addresses lowercase:
----------------------->8------------------------
sed -i 's/@\([0-9A-Za-z]*\)/@\L\1/g' arch/arc/boot/dts/*.dts* sed -i 's/0x\([0-9A-Za-z]*\)/0x\L\1/g' arch/arc/boot/dts/*.dts* ----------------------->8------------------------
Inspired by [1] and the like.
[1] http://kisskb.ellerman.id.au/kisskb/buildresult/13612017/
---
Changes v1 -> v2:
* Convert all hex addresses to lower-case [Rob]
arch/arc/boot/dts/abilis_tb100.dtsi | 58 ++++++++++++++++---------------- arch/arc/boot/dts/abilis_tb100_dvk.dts | 14 ++++---- arch/arc/boot/dts/abilis_tb101.dtsi | 58 ++++++++++++++++---------------- arch/arc/boot/dts/abilis_tb101_dvk.dts | 14 ++++---- arch/arc/boot/dts/abilis_tb10x.dtsi | 60 +++++++++++++++++----------------- arch/arc/boot/dts/axc001.dtsi | 6 ++-- arch/arc/boot/dts/axc003.dtsi | 16 ++++----- arch/arc/boot/dts/axc003_idu.dtsi | 16 ++++----- arch/arc/boot/dts/axs10x_mb.dtsi | 22 ++++++------- arch/arc/boot/dts/hsdk.dts | 4 +-- arch/arc/boot/dts/vdk_axc003.dtsi | 4 +-- arch/arc/boot/dts/vdk_axc003_idu.dtsi | 4 +-- arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 18 +++++----- 13 files changed, 147 insertions(+), 147 deletions(-)
arch/arc/boot/dts/abilis_tb100.dtsi +29 -29
@@ -38,7 +38,7 @@ clock-div = <6>; }; - iomux: iomux at FF10601c { + iomux: iomux at ff10601c { /* Port 1 */ pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ abilis,function = "mis0";
@@ -162,182 +162,182 @@ }; }; - gpioa: gpio at FF140000 { + gpioa: gpio at ff140000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF140000 0x1000>; + reg = <0xff140000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioa"; }; - gpiob: gpio at FF141000 { + gpiob: gpio at ff141000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF141000 0x1000>; + reg = <0xff141000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiob"; }; - gpioc: gpio at FF142000 { + gpioc: gpio at ff142000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF142000 0x1000>; + reg = <0xff142000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioc"; }; - gpiod: gpio at FF143000 { + gpiod: gpio at ff143000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF143000 0x1000>; + reg = <0xff143000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiod"; }; - gpioe: gpio at FF144000 { + gpioe: gpio at ff144000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF144000 0x1000>; + reg = <0xff144000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioe"; }; - gpiof: gpio at FF145000 { + gpiof: gpio at ff145000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF145000 0x1000>; + reg = <0xff145000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiof"; }; - gpiog: gpio at FF146000 { + gpiog: gpio at ff146000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF146000 0x1000>; + reg = <0xff146000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiog"; }; - gpioh: gpio at FF147000 { + gpioh: gpio at ff147000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF147000 0x1000>; + reg = <0xff147000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioh"; }; - gpioi: gpio at FF148000 { + gpioi: gpio at ff148000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF148000 0x1000>; + reg = <0xff148000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <12>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioi"; }; - gpioj: gpio at FF149000 { + gpioj: gpio at ff149000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF149000 0x1000>; + reg = <0xff149000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <32>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioj"; }; - gpiok: gpio at FF14a000 { + gpiok: gpio at ff14a000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14A000 0x1000>; + reg = <0xff14a000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <22>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiok"; }; - gpiol: gpio at FF14b000 { + gpiol: gpio at ff14b000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14B000 0x1000>; + reg = <0xff14b000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <4>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiol"; }; - gpiom: gpio at FF14c000 { + gpiom: gpio at ff14c000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14C000 0x1000>; + reg = <0xff14c000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <4>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiom"; }; - gpion: gpio at FF14d000 { + gpion: gpio at ff14d000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14D000 0x1000>; + reg = <0xff14d000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <5>;
arch/arc/boot/dts/abilis_tb100_dvk.dts +7 -7
@@ -37,27 +37,27 @@ }; soc100 { - uart at FF100000 { + uart at ff100000 { pinctrl-names = "default"; pinctrl-0 = <&pctl_uart0>; }; - ethernet at FE100000 { + ethernet at fe100000 { phy-mode = "rgmii"; }; - i2c0: i2c at FF120000 { + i2c0: i2c at ff120000 { i2c-sda-hold-time-ns = <432>; }; - i2c1: i2c at FF121000 { + i2c1: i2c at ff121000 { i2c-sda-hold-time-ns = <432>; }; - i2c2: i2c at FF122000 { + i2c2: i2c at ff122000 { i2c-sda-hold-time-ns = <432>; }; - i2c3: i2c at FF123000 { + i2c3: i2c at ff123000 { i2c-sda-hold-time-ns = <432>; }; - i2c4: i2c at FF124000 { + i2c4: i2c at ff124000 { i2c-sda-hold-time-ns = <432>; };
arch/arc/boot/dts/abilis_tb101.dtsi +29 -29
218 lines not on this page · raw message
arch/arc/boot/dts/abilis_tb101_dvk.dts +7 -7
@@ -37,27 +37,27 @@ }; soc100 { - uart at FF100000 { + uart at ff100000 { pinctrl-names = "default"; pinctrl-0 = <&pctl_uart0>; }; - ethernet at FE100000 { + ethernet at fe100000 { phy-mode = "rgmii"; }; - i2c0: i2c at FF120000 { + i2c0: i2c at ff120000 { i2c-sda-hold-time-ns = <432>; }; - i2c1: i2c at FF121000 { + i2c1: i2c at ff121000 { i2c-sda-hold-time-ns = <432>; }; - i2c2: i2c at FF122000 { + i2c2: i2c at ff122000 { i2c-sda-hold-time-ns = <432>; }; - i2c3: i2c at FF123000 { + i2c3: i2c at ff123000 { i2c-sda-hold-time-ns = <432>; }; - i2c4: i2c at FF124000 { + i2c4: i2c at ff124000 { i2c-sda-hold-time-ns = <432>; };
arch/arc/boot/dts/abilis_tb10x.dtsi +30 -30
174 lines not on this page · raw message
arch/arc/boot/dts/axc001.dtsi +3 -3
@@ -41,7 +41,7 @@ * this GPIO block ORs all interrupts on CPU card (creg,..) * to uplink only 1 IRQ to ARC core intc */ - dw-apb-gpio at 0x2000 { + dw-apb-gpio at 2000 { compatible = "snps,dw-apb-gpio"; reg = < 0x2000 0x80 >; #address-cells = <1>;
@@ -60,7 +60,7 @@ }; }; - debug_uart: dw-apb-uart at 0x5000 { + debug_uart: dw-apb-uart at 5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <33333000>;
@@ -88,7 +88,7 @@ * avoid duplicating the MB dtsi file given that IRQ from * this intc to cpu intc are different for axs101 and axs103 */ - mb_intc: dw-apb-ictl at 0xe0012000 { + mb_intc: dw-apb-ictl at e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0x0 0xe0012000 0x0 0x200 >;
arch/arc/boot/dts/axc003.dtsi +8 -8
@@ -55,7 +55,7 @@ * this GPIO block ORs all interrupts on CPU card (creg,..) * to uplink only 1 IRQ to ARC core intc */ - dw-apb-gpio at 0x2000 { + dw-apb-gpio at 2000 { compatible = "snps,dw-apb-gpio"; reg = < 0x2000 0x80 >; #address-cells = <1>;
@@ -74,7 +74,7 @@ }; }; - debug_uart: dw-apb-uart at 0x5000 { + debug_uart: dw-apb-uart at 5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <33333000>;
@@ -102,19 +102,19 @@ * external DMA buffer located outside of IOC aperture. */ axs10x_mb { - ethernet at 0x18000 { + ethernet at 18000 { dma-coherent; }; - ehci at 0x40000 { + ehci at 40000 { dma-coherent; }; - ohci at 0x60000 { + ohci at 60000 { dma-coherent; }; - mmc at 0x15000 { + mmc at 15000 { dma-coherent; }; };
@@ -132,7 +132,7 @@ * avoid duplicating the MB dtsi file given that IRQ from * this intc to cpu intc are different for axs101 and axs103 */ - mb_intc: dw-apb-ictl at 0xe0012000 { + mb_intc: dw-apb-ictl at e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0x0 0xe0012000 0x0 0x200 >;
@@ -153,7 +153,7 @@ #size-cells = <2>; ranges; /* - * Move frame buffer out of IOC aperture (0x8z-0xAz). + * Move frame buffer out of IOC aperture (0x8z-0xaz). */ frame_buffer: frame_buffer at be000000 { compatible = "shared-dma-pool";
arch/arc/boot/dts/axc003_idu.dtsi +8 -8
@@ -62,7 +62,7 @@ * this GPIO block ORs all interrupts on CPU card (creg,..) * to uplink only 1 IRQ to ARC core intc */ - dw-apb-gpio at 0x2000 { + dw-apb-gpio at 2000 { compatible = "snps,dw-apb-gpio"; reg = < 0x2000 0x80 >; #address-cells = <1>;
@@ -81,7 +81,7 @@ }; }; - debug_uart: dw-apb-uart at 0x5000 { + debug_uart: dw-apb-uart at 5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <33333000>;
@@ -109,19 +109,19 @@ * external DMA buffer located outside of IOC aperture. */ axs10x_mb { - ethernet at 0x18000 { + ethernet at 18000 { dma-coherent; }; - ehci at 0x40000 { + ehci at 40000 { dma-coherent; }; - ohci at 0x60000 { + ohci at 60000 { dma-coherent; }; - mmc at 0x15000 { + mmc at 15000 { dma-coherent; }; };
@@ -138,7 +138,7 @@ * avoid duplicating the MB dtsi file given that IRQ from * this intc to cpu intc are different for axs101 and axs103 */ - mb_intc: dw-apb-ictl at 0xe0012000 { + mb_intc: dw-apb-ictl at e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0x0 0xe0012000 0x0 0x200 >;
@@ -159,7 +159,7 @@ #size-cells = <2>; ranges; /* - * Move frame buffer out of IOC aperture (0x8z-0xAz). + * Move frame buffer out of IOC aperture (0x8z-0xaz). */ frame_buffer: frame_buffer at be000000 { compatible = "shared-dma-pool";
arch/arc/boot/dts/axs10x_mb.dtsi +11 -11
@@ -72,7 +72,7 @@ }; }; - gmac: ethernet at 0x18000 { + gmac: ethernet at 18000 { #interrupt-cells = <1>; compatible = "snps,dwmac"; reg = < 0x18000 0x2000 >;
@@ -88,13 +88,13 @@ mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */ }; - ehci at 0x40000 { + ehci at 40000 { compatible = "generic-ehci"; reg = < 0x40000 0x100 >; interrupts = < 8 >; }; - ohci at 0x60000 { + ohci at 60000 { compatible = "generic-ohci"; reg = < 0x60000 0x100 >; interrupts = < 8 >;
@@ -118,7 +118,7 @@ * dw_mci_pltfm_prepare_command() is used in generic platform * code. */ - mmc at 0x15000 { + mmc at 15000 { compatible = "altr,socfpga-dw-mshc"; reg = < 0x15000 0x400 >; fifo-depth = < 16 >;
@@ -129,7 +129,7 @@ bus-width = < 4 >; }; - uart at 0x20000 { + uart at 20000 { compatible = "snps,dw-apb-uart"; reg = <0x20000 0x100>; clock-frequency = <33333333>;
@@ -139,7 +139,7 @@ reg-io-width = <4>; }; - uart at 0x21000 { + uart at 21000 { compatible = "snps,dw-apb-uart"; reg = <0x21000 0x100>; clock-frequency = <33333333>;
@@ -150,7 +150,7 @@ }; /* UART muxed with USB data port (ttyS3) */ - uart at 0x22000 { + uart at 22000 { compatible = "snps,dw-apb-uart"; reg = <0x22000 0x100>; clock-frequency = <33333333>;
@@ -160,7 +160,7 @@ reg-io-width = <4>; }; - i2c at 0x1d000 { + i2c at 1d000 { compatible = "snps,designware-i2c"; reg = <0x1d000 0x100>; clock-frequency = <400000>;
@@ -177,7 +177,7 @@ #sound-dai-cells = <0>; }; - i2c at 0x1f000 { + i2c at 1f000 { compatible = "snps,designware-i2c"; #address-cells = <1>; #size-cells = <0>;
@@ -218,13 +218,13 @@ }; }; - eeprom at 0x54{ + eeprom at 54{ compatible = "atmel,24c01"; reg = <0x54>; pagesize = <0x8>; }; - eeprom at 0x57{ + eeprom at 57{ compatible = "atmel,24c04"; reg = <0x57>; pagesize = <0x8>;
arch/arc/boot/dts/hsdk.dts +2 -2
@@ -110,12 +110,12 @@ cgu_rst: reset-controller at 8a0 { compatible = "snps,hsdk-reset"; #reset-cells = <1>; - reg = <0x8A0 0x4>, <0xFF0 0x4>; + reg = <0x8a0 0x4>, <0xff0 0x4>; }; core_clk: core-clk at 0 { compatible = "snps,hsdk-core-pll-clock"; - reg = <0x00 0x10>, <0x14B8 0x4>; + reg = <0x00 0x10>, <0x14b8 0x4>; #clock-cells = <0>; clocks = <&input_clk>;
arch/arc/boot/dts/vdk_axc003.dtsi +2 -2
@@ -36,7 +36,7 @@ #interrupt-cells = <1>; }; - debug_uart: dw-apb-uart at 0x5000 { + debug_uart: dw-apb-uart at 5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <2403200>;
@@ -49,7 +49,7 @@ }; - mb_intc: dw-apb-ictl at 0xe0012000 { + mb_intc: dw-apb-ictl at e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0xe0012000 0x200 >;
arch/arc/boot/dts/vdk_axc003_idu.dtsi +2 -2
@@ -44,7 +44,7 @@ #interrupt-cells = <1>; }; - debug_uart: dw-apb-uart at 0x5000 { + debug_uart: dw-apb-uart at 5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <2403200>;
@@ -57,7 +57,7 @@ }; - mb_intc: dw-apb-ictl at 0xe0012000 { + mb_intc: dw-apb-ictl at e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0xe0012000 0x200 >;
arch/arc/boot/dts/vdk_axs10x_mb.dtsi +9 -9
@@ -36,7 +36,7 @@ }; }; - ethernet at 0x18000 { + ethernet at 18000 { #interrupt-cells = <1>; compatible = "snps,dwmac"; reg = < 0x18000 0x2000 >;
@@ -49,13 +49,13 @@ clock-names = "stmmaceth"; }; - ehci at 0x40000 { + ehci at 40000 { compatible = "generic-ehci"; reg = < 0x40000 0x100 >; interrupts = < 8 >; }; - uart at 0x20000 { + uart at 20000 { compatible = "snps,dw-apb-uart"; reg = <0x20000 0x100>; clock-frequency = <2403200>;
@@ -65,7 +65,7 @@ reg-io-width = <4>; }; - uart at 0x21000 { + uart at 21000 { compatible = "snps,dw-apb-uart"; reg = <0x21000 0x100>; clock-frequency = <2403200>;
@@ -75,7 +75,7 @@ reg-io-width = <4>; }; - uart at 0x22000 { + uart at 22000 { compatible = "snps,dw-apb-uart"; reg = <0x22000 0x100>; clock-frequency = <2403200>;
@@ -101,7 +101,7 @@ interrupt-names = "arc_ps2_irq"; }; - mmc at 0x15000 { + mmc at 15000 { compatible = "snps,dw-mshc"; reg = <0x15000 0x400>; fifo-depth = <1024>;
@@ -117,11 +117,11 @@ * Embedded Vision subsystem UIO mappings; only relevant for EV VDK * * This node is intentionally put outside of MB above becase - * it maps areas outside of MB's 0xEz-0xFz. + * it maps areas outside of MB's 0xez-0xfz. */ - uio_ev: uio at 0xD0000000 { + uio_ev: uio at d0000000 { compatible = "generic-uio"; - reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>; + reg = <0xd0000000 0x2000 0xd1000000 0x2000 0x90000000 0x10000000 0xc0000000 0x10000000>; reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem"; interrupt-parent = <&mb_intc>; interrupts = <23>;
Signature · 1 line
2.16.2
Quoted 26 lines · Alexey Brodkin
From: Alexey Brodkin <alexey.brodkin at synopsys.com>
1. Remove "0x" prefix from unit-address of node names ----------------------->8------------------------ sed -i 's/@0x/@/g'
arch/arc/boot/dts/*.dts*----------------------->8------------------------2. Make all hex addresses lowercase:
----------------------->8------------------------
sed -i 's/@\([0-9A-Za-z]*\)/@\L\1/g'arch/arc/boot/dts/*.dts*sed -i 's/0x\([0-9A-Za-z]*\)/0x\L\1/g'arch/arc/boot/dts/*.dts*----------------------->8------------------------Inspired by [1] and the like.
[1] http://kisskb.ellerman.id.au/kisskb/buildresult/13612017/
Signed-off-by Alexey Brodkin <abrodkin at synopsys.com>Cc Rob Herring <robh+dt at kernel.org>---
Changes v1 -> v2:
* Convert all hex addresses to lower-case [Rob]
Quoted 14 lines
arch/arc/boot/dts/abilis_tb100.dtsi | 58 ++++++++++++++++---------------- arch/arc/boot/dts/abilis_tb100_dvk.dts | 14 ++++---- arch/arc/boot/dts/abilis_tb101.dtsi | 58 ++++++++++++++++---------------- arch/arc/boot/dts/abilis_tb101_dvk.dts | 14 ++++---- arch/arc/boot/dts/abilis_tb10x.dtsi | 60 +++++++++++++++++----------------- arch/arc/boot/dts/axc001.dtsi | 6 ++-- arch/arc/boot/dts/axc003.dtsi | 16 ++++----- arch/arc/boot/dts/axc003_idu.dtsi | 16 ++++----- arch/arc/boot/dts/axs10x_mb.dtsi | 22 ++++++------- arch/arc/boot/dts/hsdk.dts | 4 +-- arch/arc/boot/dts/vdk_axc003.dtsi | 4 +-- arch/arc/boot/dts/vdk_axc003_idu.dtsi | 4 +-- arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 18 +++++----- 13 files changed, 147 insertions(+), 147 deletions(-)
Hi Alexey, Rob,
Quoted 43 lines · Rob Herring
Quoted 26 lines · Alexey Brodkin
From: Alexey Brodkin <alexey.brodkin at synopsys.com>
1. Remove "0x" prefix from unit-address of node names ----------------------->8------------------------ sed -i 's/@0x/@/g'
arch/arc/boot/dts/*.dts*----------------------->8------------------------2. Make all hex addresses lowercase:
----------------------->8------------------------
sed -i 's/@\([0-9A-Za-z]*\)/@\L\1/g'arch/arc/boot/dts/*.dts*sed -i 's/0x\([0-9A-Za-z]*\)/0x\L\1/g'arch/arc/boot/dts/*.dts*----------------------->8------------------------Inspired by [1] and the like.
[1] http://kisskb.ellerman.id.au/kisskb/buildresult/13612017/
Signed-off-by Alexey Brodkin <abrodkin at synopsys.com>Cc Rob Herring <robh+dt at kernel.org>---
Changes v1 -> v2:
* Convert all hex addresses to lower-case [Rob]
Quoted 14 lines
arch/arc/boot/dts/abilis_tb100.dtsi | 58 ++++++++++++++++---------------- arch/arc/boot/dts/abilis_tb100_dvk.dts | 14 ++++---- arch/arc/boot/dts/abilis_tb101.dtsi | 58 ++++++++++++++++---------------- arch/arc/boot/dts/abilis_tb101_dvk.dts | 14 ++++---- arch/arc/boot/dts/abilis_tb10x.dtsi | 60 +++++++++++++++++----------------- arch/arc/boot/dts/axc001.dtsi | 6 ++-- arch/arc/boot/dts/axc003.dtsi | 16 ++++----- arch/arc/boot/dts/axc003_idu.dtsi | 16 ++++----- arch/arc/boot/dts/axs10x_mb.dtsi | 22 ++++++------- arch/arc/boot/dts/hsdk.dts | 4 +-- arch/arc/boot/dts/vdk_axc003.dtsi | 4 +-- arch/arc/boot/dts/vdk_axc003_idu.dtsi | 4 +-- arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 18 +++++----- 13 files changed, 147 insertions(+), 147 deletions(-)
Quoted 1 line
Reviewed-by Rob Herring <robh at kernel.org>
Thx for the quick look at this. I've added this to ARC for-curr !
Thx,
-Vineet