dt-bindings: spi: imx: Add an entry for the i.MX8QM compatible

Add an entry for the "fsl,imx8mq-ecspi" compatible to describe the ECSPI version present on i.MX8M.

---
 Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 1 +
 1 file changed, 1 insertion(+)

index e3c48b20b1a6..2d3264140cc5 100644
@@ -10,6 +10,7 @@ Required properties:
   - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
   - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
   - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
+  - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain CSPI/eCSPI interrupt
 - clocks : Clock specifiers for both ipg and per clocks.

2.17.1

The patch

dt-bindings: spi: imx: Add an entry for the i.MX8QM compatible

has been applied to the spi tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From: Fabio Estevam <[email protected]>
Date: Sat, 26 Jan 2019 19:30:11 -0200
Subject: [PATCH] dt-bindings: spi: imx: Add an entry for the i.MX8QM
compatible

Add an entry for the "fsl,imx8mq-ecspi" compatible to describe the ECSPI version present on i.MX8M.

---
 Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 1 +
 1 file changed, 1 insertion(+)

index e3c48b20b1a6..2d3264140cc5 100644
@@ -10,6 +10,7 @@ Required properties:
   - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
   - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
   - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
+  - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain CSPI/eCSPI interrupt
 - clocks : Clock specifiers for both ipg and per clocks.

2.20.1

The patch

dt-bindings: spi: imx: Add an entry for the i.MX8QM compatible

has been applied to the spi tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From: Fabio Estevam <[email protected]>
Date: Sat, 26 Jan 2019 19:30:11 -0200
Subject: [PATCH] dt-bindings: spi: imx: Add an entry for the i.MX8QM
compatible

Add an entry for the "fsl,imx8mq-ecspi" compatible to describe the ECSPI version present on i.MX8M.

---
 Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 1 +
 1 file changed, 1 insertion(+)

index e3c48b20b1a6..2d3264140cc5 100644
@@ -10,6 +10,7 @@ Required properties:
   - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
   - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
   - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
+  - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain CSPI/eCSPI interrupt
 - clocks : Clock specifiers for both ipg and per clocks.

2.20.1