Skip to contentSkip to conversation

arm64: dt: poplar: add optee node

PATCH New Igor Opaniuk 4 participants 4 messages Jan 17, 2019 – Jan 27, 2019 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dt: poplar: add optee node

As Poplar supports running TF-A with OP-TEE as BL32 payload, add op-tee node in DT, which enables usage of OP-TEE driver (which provides an interface for requesting services from OP-TEE).

---
 arch/arm/dts/hi3798cv200-poplar.dts | 7 +++++++
 1 file changed, 7 insertions(+)
arch/arm/dts/hi3798cv200-poplar.dts +7 -0
index 964326e..6bc2a23 100644
@@ -28,6 +28,13 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/1 arm64: dt: poplar: add optee node

Hi Igor,

Quoted 6 lines · Igor Opaniuk

As Poplar supports running TF-A with OP-TEE as BL32 payload, add op-tee node in DT, which enables usage of OP-TEE driver (which provides an interface for requesting services from OP-TEE).

I'm fine with the change. But rather than pushing changes to u-boot, can you please push it to kernel repository, which is the DTS upstream right now? We sync DTS changes from kernel when needed, and only maintains u-boot specific changes in hi3798cv200-u-boot.dtsi.

Shawn

Quoted 25 lines
---
 arch/arm/dts/hi3798cv200-poplar.dts | 7 +++++++
 1 file changed, 7 insertions(+)
arch/arm/dts/hi3798cv200-poplar.dts +7 -0
index 964326e..6bc2a23 100644
@@ -28,6 +28,13 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
Signature · 1 line
2.7.4
#2 lore raw

PATCH 1/1 arm64: dt: poplar: add optee node

In reply to Igor Opaniuk
Quoted 10 lines · Igor Opaniuk

As Poplar supports running TF-A with OP-TEE as BL32 payload, add op-tee node in DT, which enables usage of OP-TEE driver (which provides an interface for requesting services from OP-TEE).

---
 arch/arm/dts/hi3798cv200-poplar.dts | 7 +++++++
 1 file changed, 7 insertions(+)
#3 lore raw

PATCH 1/1 arm64: dt: poplar: add optee node

In reply to Igor Opaniuk
Quoted 7 lines · Igor Opaniuk

As Poplar supports running TF-A with OP-TEE as BL32 payload, add op-tee node in DT, which enables usage of OP-TEE driver (which provides an interface for requesting services from OP-TEE).

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190126/4fdb0487/attachment.sig>