arm64: dts: allwinner: h6: Move GIC device node fix base address ordering
Subsystems (2)
PATCH 1/1 arm64: dts: allwinner: h6: Move GIC device node fix base address ordering
The GIC device node was placed out of order in the initial device tree submission. Move it so the nodes are correctly sorted by base address again.
Fixes e54be32d0273 ("arm64: allwinner: h6: add the basical Allwinner H6 DTSI file")
Signed-off-by Chen-Yu Tsai <[email protected]>
--- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 22 ++++++++++---------- 1 file changed, 11 insertions(+), 11 deletions(-)
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +11 -11
@@ -178,17 +178,6 @@ #reset-cells = <1>; }; - gic: interrupt-controller@3021000 { - compatible = "arm,gic-400"; - reg = <0x03021000 0x1000>, - <0x03022000 0x2000>, - <0x03024000 0x2000>, - <0x03026000 0x2000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - interrupt-controller; - #interrupt-cells = <3>; - }; - pio: pinctrl@300b000 { compatible = "allwinner,sun50i-h6-pinctrl"; reg = <0x0300b000 0x400>;
@@ -239,6 +228,17 @@ }; }; + gic: interrupt-controller@3021000 { + compatible = "arm,gic-400"; + reg = <0x03021000 0x1000>, + <0x03022000 0x2000>, + <0x03024000 0x2000>, + <0x03026000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + mmc0: mmc@4020000 { compatible = "allwinner,sun50i-h6-mmc", "allwinner,sun50i-a64-mmc";
Signature · 1 line
2.20.1
Maxime Ripard
AppliedQuoted 6 lines · Chen-Yu Tsai
The GIC device node was placed out of order in the initial device tree submission. Move it so the nodes are correctly sorted by base address again.
Fixes e54be32d0273 ("arm64: allwinner: h6: add the basical Allwinner H6 DTSI file")Signed-off-by Chen-Yu Tsai <[email protected]>
Applied, thanks!
Maxime
Signature · 3 lines
Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com