Skip to contentSkip to conversation

staging: erofs: use xattr_prefix to wrap up

PATCH In review Gao Xiang 2 participants 4 messages Jan 29, 2019 Staging

lore
Share & tools
lore

Gao Xiang

author
#0 lore raw

PATCH v4 1/2 staging: erofs: use xattr_prefix to wrap up

Let's use xattr_prefix instead of open code.
No logic changes.

Reviewed-by Chao Yu <yuchao0 at huawei.com>
Signed-off-by Gao Xiang <gaoxiang25 at huawei.com>

---
[resend v2 as v4]
change log v2:
- remove the confusing line according to Dan Carpenter;

 drivers/staging/erofs/xattr.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/staging/erofs/xattr.c +1 -2
index 1c9498e38f0e..7de46690d972 100644
@@ -520,8 +520,7 @@ static int xattr_entrylist(struct xattr_iter *_it,
 	if (h == NULL || (h->list != NULL && !h->list(it->dentry)))
 		return 1;
 
-	/* Note that at least one of 'prefix' and 'name' should be non-NULL */
-	prefix = h->prefix != NULL ? h->prefix : h->name;
+	prefix = xattr_prefix(h);
 	prefix_len = strlen(prefix);
 
 	if (it->buffer == NULL) {
Signature · 1 line
2.14.4
author
#1 lore raw

PATCH v4 2/2 staging: erofs: complete POSIX ACL support

Let's add .get_acl() to read the file's acl from its xattrs to make POSIX ACL usable.

Here is the on-disk detail,
fullname: system.posix_acl_access
struct erofs_xattr_entry:
.e_name_len = 0
.e_name_index = EROFS_XATTR_INDEX_POSIX_ACL_ACCESS (2)

fullname: system.posix_acl_default
struct erofs_xattr_entry:

	.e_name_len = 0
	.e_name_index = EROFS_XATTR_INDEX_POSIX_ACL_DEFAULT (3)
Reviewed-by Chao Yu <yuchao0 at huawei.com>
Signed-off-by Gao Xiang <gaoxiang25 at huawei.com>

---
change log v4:
- leave kmalloc and wait the conclusion of fault injection pointed out by Dan Carpenter;

change log v3:
- kvmalloc -> erofs_kmalloc suggested by Chao;
- update SB_POSIXACL for the remount case as well;

change log v2:
- add the missing SB_POSIXACL flag;
- fix the on-disk detail, use .e_name_len == 0 and proper prefix value;
- tested ok with xattr enabled erofs_mkfs;

 .../erofs/Documentation/filesystems/erofs.txt      |  2 ++
 drivers/staging/erofs/inode.c                      |  3 ++
 drivers/staging/erofs/namei.c                      |  1 +
 drivers/staging/erofs/super.c                      | 10 ++++++
 drivers/staging/erofs/xattr.c                      | 37 ++++++++++++++++++++++
 drivers/staging/erofs/xattr.h                      |  6 ++++
 6 files changed, 59 insertions(+)
drivers/staging/erofs/Documentation/filesystems/erofs.txt +2 -0
index 803988d74c21..961ec4da7705 100644
@@ -36,6 +36,8 @@ Here is the main features of EROFS:
 
  - Support xattr inline and tail-end data inline for all files;
 
+ - Support POSIX.1e ACLs by using xattrs;
+
  - Support transparent file compression as an option:
    LZ4 algorithm with 4 KB fixed-output compression for high performance;
 
drivers/staging/erofs/inode.c +3 -0
index 4f04f7c38cf2..924b8dfc7a8f 100644
@@ -287,6 +287,7 @@ const struct inode_operations erofs_generic_iops = {
 #ifdef CONFIG_EROFS_FS_XATTR
 	.listxattr = erofs_listxattr,
 #endif
+	.get_acl = erofs_get_acl,
 };
 
 const struct inode_operations erofs_symlink_iops = {
@@ -294,6 +295,7 @@ const struct inode_operations erofs_symlink_iops = {
 #ifdef CONFIG_EROFS_FS_XATTR
 	.listxattr = erofs_listxattr,
 #endif
+	.get_acl = erofs_get_acl,
 };
 
 const struct inode_operations erofs_fast_symlink_iops = {
@@ -301,5 +303,6 @@ const struct inode_operations erofs_fast_symlink_iops = {
 #ifdef CONFIG_EROFS_FS_XATTR
 	.listxattr = erofs_listxattr,
 #endif
+	.get_acl = erofs_get_acl,
 };
 
drivers/staging/erofs/namei.c +1 -0
index 7fed1f996ab0..b1752adc5934 100644
@@ -238,5 +238,6 @@ const struct inode_operations erofs_dir_iops = {
 #ifdef CONFIG_EROFS_FS_XATTR
 	.listxattr = erofs_listxattr,
 #endif
+	.get_acl = erofs_get_acl,
 };
 
drivers/staging/erofs/super.c +10 -0
index 176fca2af379..15c784fba879 100644
@@ -398,6 +398,11 @@ static int erofs_read_super(struct super_block *sb,
 	if (!silent)
 		infoln("root inode @ nid %llu", ROOT_NID(sbi));
 
+	if (test_opt(sbi, POSIX_ACL))
+		sb->s_flags |= SB_POSIXACL;
+	else
+		sb->s_flags &= ~SB_POSIXACL;
+
 #ifdef CONFIG_EROFS_FS_ZIP
 	INIT_RADIX_TREE(&sbi->workstn_tree, GFP_ATOMIC);
 #endif
@@ -646,6 +651,11 @@ static int erofs_remount(struct super_block *sb, int *flags, char *data)
 	if (err)
 		goto out;
 
+	if (test_opt(sbi, POSIX_ACL))
+		sb->s_flags |= SB_POSIXACL;
+	else
+		sb->s_flags &= ~SB_POSIXACL;
+
 	*flags |= SB_RDONLY;
 	return 0;
 out:
drivers/staging/erofs/xattr.c +37 -0
index 7de46690d972..e748df8d2b44 100644
@@ -643,3 +643,40 @@ ssize_t erofs_listxattr(struct dentry *dentry,
 	return shared_listxattr(&it);
 }
 
+#ifdef CONFIG_EROFS_FS_POSIX_ACL
+struct posix_acl *erofs_get_acl(struct inode *inode, int type)
+{
+	struct posix_acl *acl;
+	int prefix, rc;
+	char *value = NULL;
+
+	switch (type) {
+	case ACL_TYPE_ACCESS:
+		prefix = EROFS_XATTR_INDEX_POSIX_ACL_ACCESS;
+		break;
+	case ACL_TYPE_DEFAULT:
+		prefix = EROFS_XATTR_INDEX_POSIX_ACL_DEFAULT;
+		break;
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+
+	rc = erofs_getxattr(inode, prefix, "", NULL, 0);
+	if (rc > 0) {
+		value = kmalloc(rc, GFP_KERNEL);
+		if (!value)
+			return ERR_PTR(-ENOMEM);
+		rc = erofs_getxattr(inode, prefix, "", value, rc);
+	}
+
+	if (rc == -ENOATTR)
+		acl = NULL;
+	else if (rc < 0)
+		acl = ERR_PTR(rc);
+	else
+		acl = posix_acl_from_xattr(&init_user_ns, value, rc);
+	kfree(value);
+	return acl;
+}
+#endif
+
drivers/staging/erofs/xattr.h +6 -0
index 634dae9aaa0b..35ba5ac2139a 100644
@@ -87,5 +87,11 @@ static ssize_t __maybe_unused erofs_listxattr(struct dentry *dentry,
 }
 #endif
 
+#ifdef CONFIG_EROFS_FS_POSIX_ACL
+struct posix_acl *erofs_get_acl(struct inode *inode, int type);
+#else
+#define erofs_get_acl	(NULL)
+#endif
+
 #endif
 
Signature · 1 line
2.14.4
#2 lore raw

Re: [PATCH v4 2/2] staging: erofs: complete POSIX ACL support

Quoted 14 lines · Gao Xiang

Let's add .get_acl() to read the file's acl from its xattrs to make POSIX ACL usable.

Here is the on-disk detail,
fullname: system.posix_acl_access
struct erofs_xattr_entry:
.e_name_len = 0
.e_name_index = EROFS_XATTR_INDEX_POSIX_ACL_ACCESS (2)

fullname: system.posix_acl_default
struct erofs_xattr_entry:

	.e_name_len = 0
	.e_name_index = EROFS_XATTR_INDEX_POSIX_ACL_DEFAULT (3)
Quoted 6 lines
Reviewed-by Chao Yu <yuchao0 at huawei.com>
Signed-off-by Gao Xiang <gaoxiang25 at huawei.com>

---
change log v4:
- leave kmalloc and wait the conclusion of fault injection pointed out by Dan Carpenter;

I do think this is the right thing, but I also wasn't going to ask you do redo v3. Anyway, thanks!

regards,
dan carpenter

author
#3 lore raw

Re: [PATCH v4 2/2] staging: erofs: complete POSIX ACL support

Quoted 22 lines · Dan Carpenter
Quoted 14 lines · Gao Xiang

Let's add .get_acl() to read the file's acl from its xattrs to make POSIX ACL usable.

Here is the on-disk detail,
fullname: system.posix_acl_access
struct erofs_xattr_entry:
.e_name_len = 0
.e_name_index = EROFS_XATTR_INDEX_POSIX_ACL_ACCESS (2)

fullname: system.posix_acl_default
struct erofs_xattr_entry:

	.e_name_len = 0
	.e_name_index = EROFS_XATTR_INDEX_POSIX_ACL_DEFAULT (3)
Quoted 6 lines
Reviewed-by Chao Yu <yuchao0 at huawei.com>
Signed-off-by Gao Xiang <gaoxiang25 at huawei.com>

---
change log v4:
- leave kmalloc and wait the conclusion of fault injection pointed out by Dan Carpenter;

Quoted 5 lines

I do think this is the right thing, but I also wasn't going to ask you do redo v3. Anyway, thanks!

regards,
dan carpenter

OK, let's wait the Chao's idea then...

Thanks,
Gao Xiang

Quoted 1 line