drm: drop drm_bus from todo
Subsystems (3)
PATCH 1/1 drm: drop drm_bus from todo
David Herrmann removed the last bits of drm_bus in:c5786fe5f1c50941dbe27fc8b4aa1afee46ae893 ("drm: Goody bye, drm_bus!")
Remove the todo item.
--- Documentation/gpu/todo.rst | 19 ------------------- 1 file changed, 19 deletions(-)
Documentation/gpu/todo.rst +0 -19
@@ -10,25 +10,6 @@ graphics subsystem useful as newbie projects. Or for slow rainy days. Subsystem-wide refactorings =========================== -De-midlayer drivers -------------------- - -With the recent ``drm_bus`` cleanup patches for 3.17 it is no longer required -to have a ``drm_bus`` structure set up. Drivers can directly set up the -``drm_device`` structure instead of relying on bus methods in ``drm_usb.c`` -and ``drm_pci.c``. The goal is to get rid of the driver's ``->load`` / -``->unload`` callbacks and open-code the load/unload sequence properly, using -the new two-stage ``drm_device`` setup/teardown. - -Once all existing drivers are converted we can also remove those bus support -files for USB and platform devices. - -All you need is a GPU for a non-converted driver (currently almost all of -them, but also all the virtual ones used by KVM, so everyone qualifies). - -Contact: Daniel Vetter, Thierry Reding, respective driver maintainers - - Remove custom dumb_map_offset implementations ---------------------------------------------
Signature · 6 lines
2.12.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hey
Quoted 12 lines · Sam Ravnborg
David Herrmann removed the last bits of
drm_busin:c5786fe5f1c50941dbe27fc8b4aa1afee46ae893("drm: Goody bye,drm_bus!")Remove the todo item.
Signed-off-by Sam Ravnborg <[email protected]>Cc David Herrmann <[email protected]>Cc David Airlie <[email protected]>Cc Daniel Vetter <[email protected]>Cc Maarten Lankhorst <[email protected]>Cc Maxime Ripard <[email protected]>Cc Sean Paul <[email protected]>
Quoted 3 lines
--- Documentation/gpu/todo.rst | 19 ------------------- 1 file changed, 19 deletions(-)
I miss drm_bus!
Thanks
David
Quoted 31 lines
Documentation/gpu/todo.rst +0
-20@@ -10,25 +10,6 @@ graphics subsystem useful as newbie projects. Or for slow rainy days. Subsystem-wide refactorings =========================== -De-midlayer drivers -------------------- - -With the recent ``drm_bus`` cleanup patches for 3.17 it is no longer required -to have a ``drm_bus`` structure set up. Drivers can directly set up the -``drm_device`` structure instead of relying on bus methods in ``drm_usb.c`` -and ``drm_pci.c``. The goal is to get rid of the driver's ``->load`` / -``->unload`` callbacks and open-code the load/unload sequence properly, using -the new two-stage ``drm_device`` setup/teardown. - -Once all existing drivers are converted we can also remove those bus support -files for USB and platform devices. - -All you need is a GPU for a non-converted driver (currently almost all of -them, but also all the virtual ones used by KVM, so everyone qualifies). - -Contact: Daniel Vetter, Thierry Reding, respective driver maintainers - - Remove custom dumb_map_offset implementations --------------------------------------------- --
Quoted 2 lines
2.12.0
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 19 lines · David Herrmann
Hey
Quoted 12 lines · Sam Ravnborg
David Herrmann removed the last bits of
drm_busin:c5786fe5f1c50941dbe27fc8b4aa1afee46ae893("drm: Goody bye,drm_bus!")Remove the todo item.
Signed-off-by Sam Ravnborg <[email protected]>Cc David Herrmann <[email protected]>Cc David Airlie <[email protected]>Cc Daniel Vetter <[email protected]>Cc Maarten Lankhorst <[email protected]>Cc Maxime Ripard <[email protected]>Cc Sean Paul <[email protected]>Quoted 3 lines
--- Documentation/gpu/todo.rst | 19 ------------------- 1 file changed, 19 deletions(-)
Quoted 3 lines
I miss
drm_bus!Reviewed-by David Herrmann <[email protected]>
Sam, want drm-misc commit rights to start merging your own stuff? Assuming you plan to stick around ofc ... I'll also ask the drm-misc maintainers whether that's ok.
Thanks, Daniel
Quoted 37 lines
Thanks
DavidQuoted 33 lines
Documentation/gpu/todo.rst +0
-20@@ -10,25 +10,6 @@ graphics subsystem useful as newbie projects. Or for slow rainy days. Subsystem-wide refactorings =========================== -De-midlayer drivers -------------------- - -With the recent ``drm_bus`` cleanup patches for 3.17 it is no longer required -to have a ``drm_bus`` structure set up. Drivers can directly set up the -``drm_device`` structure instead of relying on bus methods in ``drm_usb.c`` -and ``drm_pci.c``. The goal is to get rid of the driver's ``->load`` / -``->unload`` callbacks and open-code the load/unload sequence properly, using -the new two-stage ``drm_device`` setup/teardown. - -Once all existing drivers are converted we can also remove those bus support -files for USB and platform devices. - -All you need is a GPU for a non-converted driver (currently almost all of -them, but also all the virtual ones used by KVM, so everyone qualifies). - -Contact: Daniel Vetter, Thierry Reding, respective driver maintainers - - Remove custom dumb_map_offset implementations --------------------------------------------- --2.12.0
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Daniel.
Quoted 4 lines
Sam, want drm-misc commit rights to start merging your own stuff? Assuming you plan to stick around ofc ... I'll also ask the drm-misc maintainers whether that's ok.
The plan is to re-submit the Atmel LCDC DRM driver when I find enough time to finish it. All coding is done and it builds, I 'only' need to make it work.
When I submit the driver the plan is to share the maintainer role for both Atmel based DRM drivers (hlcdc + lcdc).
So it would make sense to gain drm-misc commit rights at least then.
Last time I looked at it I was stucked in the keys required and the tools I needed to learn. This was not really where I had energy to spend the effort.
Sam
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 10 lines · Sam Ravnborg
Hi Daniel.
Quoted 4 lines
Sam, want drm-misc commit rights to start merging your own stuff? Assuming you plan to stick around ofc ... I'll also ask the drm-misc maintainers whether that's ok.
The plan is to re-submit the Atmel LCDC DRM driver when I find enough time to finish it. All coding is done and it builds, I 'only' need to make it work.
Quoted 6 lines
When I submit the driver the plan is to share the maintainer role for both Atmel based DRM drivers (hlcdc + lcdc).
So it would make sense to gain drm-misc commit rights at least then.Last time I looked at it I was stucked in the keys required and the tools I needed to learn. This was not really where I had energy to spend the effort.
Can I motivate you some more? I'm happy to ramp up people for a bit, but I can't do patch review&applying for everyone. Wouldn't scale. Expect me to become increasingly annoying about this :-)
-Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Sean Paul
Acked-byQuoted 21 lines · Daniel Vetter
Quoted 19 lines · David Herrmann
Hey
Quoted 15 lines · Sam Ravnborg
David Herrmann removed the last bits of
drm_busin:c5786fe5f1c50941dbe27fc8b4aa1afee46ae893("drm: Goody bye,drm_bus!")Remove the todo item.
Signed-off-by Sam Ravnborg <[email protected]>Cc David Herrmann <[email protected]>Cc David Airlie <[email protected]>Cc Daniel Vetter <[email protected]>Cc Maarten Lankhorst <[email protected]>Cc Maxime Ripard <[email protected]>Cc Sean Paul <[email protected]>--- Documentation/gpu/todo.rst | 19 ------------------- 1 file changed, 19 deletions(-)
Quoted 8 lines
Quoted 3 lines
I miss
drm_bus!Reviewed-by David Herrmann <[email protected]>Sam, want drm-misc commit rights to start merging your own stuff? Assuming you plan to stick around ofc ... I'll also ask the drm-misc maintainers whether that's ok.
Quoted 36 lines
Thanks, Daniel
Quoted 34 lines
Thanks
DavidQuoted 30 lines
Documentation/gpu/todo.rst +0
-19@@ -10,25 +10,6 @@ graphics subsystem useful as newbie projects. Or for slow rainy days. Subsystem-wide refactorings =========================== -De-midlayer drivers -------------------- - -With the recent ``drm_bus`` cleanup patches for 3.17 it is no longer required -to have a ``drm_bus`` structure set up. Drivers can directly set up the -``drm_device`` structure instead of relying on bus methods in ``drm_usb.c`` -and ``drm_pci.c``. The goal is to get rid of the driver's ``->load`` / -``->unload`` callbacks and open-code the load/unload sequence properly, using -the new two-stage ``drm_device`` setup/teardown. - -Once all existing drivers are converted we can also remove those bus support -files for USB and platform devices. - -All you need is a GPU for a non-converted driver (currently almost all of -them, but also all the virtual ones used by KVM, so everyone qualifies). - -Contact: Daniel Vetter, Thierry Reding, respective driver maintainers - - Remove custom dumb_map_offset implementations ---------------------------------------------
Quoted 8 lines
Quoted 3 lines
Quoted 3 lines
--
2.12.0--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 19 lines · David Herrmann
Hey
Quoted 12 lines · Sam Ravnborg
David Herrmann removed the last bits of
drm_busin:c5786fe5f1c50941dbe27fc8b4aa1afee46ae893("drm: Goody bye,drm_bus!")Remove the todo item.
Signed-off-by Sam Ravnborg <[email protected]>Cc David Herrmann <[email protected]>Cc David Airlie <[email protected]>Cc Daniel Vetter <[email protected]>Cc Maarten Lankhorst <[email protected]>Cc Maxime Ripard <[email protected]>Cc Sean Paul <[email protected]>Quoted 3 lines
--- Documentation/gpu/todo.rst | 19 ------------------- 1 file changed, 19 deletions(-)
Quoted 3 lines
I miss
drm_bus!Reviewed-by David Herrmann <[email protected]>
Applied and pushed to drm-misc-next
Sam
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel