sdl: Let it be optional (in particular, on OpenBSD)
v3 cover sdl: Let it be optional (in particular, on OpenBSD)
since v2:
- move LM32 specific hardware out of common-obj to bypass make rules limitations
- use "WARNING" string in configure
v1 was too simple to work, so here we go again.
I hit a problem with the Milkymist TMU device when disabling SDL, so I fixed it and added another patch in this series which clean a bit the device, but is not required for this series. The important patches are 1-3, and eventually 1-2 could be squashed altogether, although the changes are slighly different.
Regards,
Phil.
v1 https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg05509.html
v2 https://www.mail-archive.com/[email protected]/msg590116.html
[lists.gnu.org down?]
$ git backport-diff -u v2 Key: [----] : patches are identical [####] : number of functional differences between upstream/downstream patch [down] : patch is downstream-only The flags [FC] indicate (F)unctional and (C)ontextual differences, respectively
001/5:[down] 'hw/lm32: Move LM32 specific hardware out of common-obj list' 002/5:[----] [--] 'configure: LM32 Milkymist Texture Mapping Unit (tmu2) also depends of X11' 003/5:[----] [-C] 'hw/display/milkymist-tmu2: Explicit the dependency to both X11 / OpenGL' 004/5:[0002] [FC] 'configure: Let SDL support be optional on OpenBSD' 005/5:[----] [--] 'hw/display/milkymist-tmu2: Move inlined code from header to source'
Philippe Mathieu-Daudé (5):
hw/lm32: Move LM32 specific hardware out of common-obj list
configure: LM32 Milkymist Texture Mapping Unit (tmu2) also depends of
X11
hw/display/milkymist-tmu2: Explicit the dependency to both X11 /
OpenGL
configure: Let SDL support be optional on OpenBSD hw/display/milkymist-tmu2: Move inlined code from header to source
MAINTAINERS | 1 + configure | 16 +++++++- default-configs/lm32-softmmu.mak | 2 +- hw/audio/Makefile.objs | 2 +- hw/char/Makefile.objs | 6 +-- hw/display/Makefile.objs | 8 ++-- hw/display/milkymist-tmu2.c | 49 ++++++++++++++++++++++ hw/intc/Makefile.objs | 2 +- hw/lm32/milkymist-hw.h | 63 ----------------------------- hw/lm32/milkymist.c | 1 + hw/timer/Makefile.objs | 4 +- include/hw/display/milkymist_tmu2.h | 41 +++++++++++++++++++ 12 files changed, 119 insertions(+), 76 deletions(-) create mode 100644 include/hw/display/milkymist_tmu2.h
Signature · 1 line
2.20.1
PATCH v3 1/5 hw/lm32: Move LM32 specific hardware out of common-obj list
The LM32 specific hardware is only used by the LM32 target, it is pointless to compile those objects in other targets.
--- hw/audio/Makefile.objs | 2 +- hw/char/Makefile.objs | 6 +++--- hw/display/Makefile.objs | 4 ++-- hw/intc/Makefile.objs | 2 +- hw/timer/Makefile.objs | 4 ++-- 5 files changed, 9 insertions(+), 9 deletions(-)
hw/audio/Makefile.objs +1 -1
@@ -13,6 +13,6 @@ common-obj-$(CONFIG_PL041) += pl041.o lm4549.o common-obj-$(CONFIG_CS4231) += cs4231.o common-obj-$(CONFIG_MARVELL_88W8618) += marvell_88w8618.o -common-obj-$(CONFIG_MILKYMIST) += milkymist-ac97.o +obj-$(CONFIG_MILKYMIST) += milkymist-ac97.o common-obj-y += soundhw.o
hw/char/Makefile.objs +3 -3
@@ -26,9 +26,9 @@ common-obj-$(CONFIG_ETRAXFS) += etraxfs_ser.o common-obj-$(CONFIG_ISA_DEBUG) += debugcon.o common-obj-$(CONFIG_GRLIB) += grlib_apbuart.o common-obj-$(CONFIG_IMX) += imx_serial.o -common-obj-$(CONFIG_LM32) += lm32_juart.o -common-obj-$(CONFIG_LM32) += lm32_uart.o -common-obj-$(CONFIG_MILKYMIST) += milkymist-uart.o +obj-$(CONFIG_LM32) += lm32_juart.o +obj-$(CONFIG_LM32) += lm32_uart.o +obj-$(CONFIG_MILKYMIST) += milkymist-uart.o common-obj-$(CONFIG_SCLPCONSOLE) += sclpconsole.o sclpconsole-lm.o obj-$(CONFIG_VIRTIO) += virtio-serial-bus.o
hw/display/Makefile.objs +2 -2
@@ -25,10 +25,10 @@ common-obj-$(CONFIG_BOCHS_DISPLAY) += edid-region.o common-obj-$(CONFIG_BLIZZARD) += blizzard.o common-obj-$(CONFIG_EXYNOS4) += exynos4210_fimd.o common-obj-$(CONFIG_FRAMEBUFFER) += framebuffer.o -common-obj-$(CONFIG_MILKYMIST) += milkymist-vgafb.o +obj-$(CONFIG_MILKYMIST) += milkymist-vgafb.o common-obj-$(CONFIG_ZAURUS) += tc6393xb.o -common-obj-$(CONFIG_MILKYMIST_TMU2) += milkymist-tmu2.o +obj-$(CONFIG_MILKYMIST_TMU2) += milkymist-tmu2.o milkymist-tmu2.o-cflags := $(X11_CFLAGS) milkymist-tmu2.o-libs := $(X11_LIBS)
hw/intc/Makefile.objs +1 -1
@@ -7,7 +7,7 @@ common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-pmu-iomod-intc.o common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp-ipi.o common-obj-$(CONFIG_ETRAXFS) += etraxfs_pic.o common-obj-$(CONFIG_IMX) += imx_avic.o imx_gpcv2.o -common-obj-$(CONFIG_LM32) += lm32_pic.o +obj-$(CONFIG_LM32) += lm32_pic.o common-obj-$(CONFIG_REALVIEW) += realview_gic.o common-obj-$(CONFIG_SLAVIO) += slavio_intctl.o common-obj-$(CONFIG_IOAPIC) += ioapic_common.o
hw/timer/Makefile.objs +2 -2
@@ -20,8 +20,8 @@ common-obj-$(CONFIG_ETRAXFS) += etraxfs_timer.o common-obj-$(CONFIG_GRLIB) += grlib_gptimer.o common-obj-$(CONFIG_IMX) += imx_epit.o common-obj-$(CONFIG_IMX) += imx_gpt.o -common-obj-$(CONFIG_LM32) += lm32_timer.o -common-obj-$(CONFIG_MILKYMIST) += milkymist-sysctl.o +obj-$(CONFIG_LM32) += lm32_timer.o +obj-$(CONFIG_MILKYMIST) += milkymist-sysctl.o common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp-rtc.o common-obj-$(CONFIG_NRF51_SOC) += nrf51_timer.o
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v3 1/5] hw/lm32: Move LM32 specific hardware out of common-obj list
Quoted 2 lines · Philippe Mathieu-Daudé
The LM32 specific hardware is only used by the LM32 target, it is pointless to compile those objects in other targets.
I think the idea was to only move the critical object files from common-obj to obj (i.e. tmu2 only, or the two files in hw/display/).
cheers,
Gerd
PATCH v3 2/5 configure: LM32 Milkymist Texture Mapping Unit (tmu2) also depends of X11
In reply to Philippe Mathieu-DaudéCommit 5f9b1e35060b8 remove the dependency between OpenGL and X11. However the milkymist-tmu2 device do require X11.
When using SDL, the configure script sets need_x11=yes, so the X11 flags are populated to the makefiles.
When building without SDL, X11 is not pulled and populated, leading to a link failure:
LINK lm32-softmmu/qemu-system-lm32
hw/lm32/milkymist.o: In function `milkymist_tmu2_create':
hw/lm32/milkymist-hw.h:114: undefined reference to XOpenDisplay' hw/lm32/milkymist-hw.h:140: undefined reference to XFree' hw/lm32/milkymist-hw.h:141: undefined reference to XCloseDisplay' hw/lm32/milkymist-hw.h:130: undefined reference to XCloseDisplay' ../hw/display/milkymist-tmu2.o: In function `tmu2_glx_init':
hw/display/milkymist-tmu2.c:112: undefined reference to XOpenDisplay' hw/display/milkymist-tmu2.c:123: undefined reference to XFree'
collect2: error: ld returned 1 exit status
gmake[1]: *** [Makefile:199: qemu-system-lm32] Error 1
Enforce the X11 dependency when the LM32 target is built. This will allow us to build QEMU without SDL.
--- configure | 10 ++++++++++ 1 file changed, 10 insertions(+)
configure +10 -0
@@ -4047,6 +4047,16 @@ EOF fi fi +if test "$opengl" = "yes" -a "$have_x11" = "yes"; then + for target in $target_list; do + case $target in + lm32-softmmu) # milkymist-tmu2 requires X11 and OpenGL + need_x11=yes + ;; + esac + done +fi + ########################################## # libxml2 probe if test "$libxml2" != "no" ; then
Signature · 1 line
2.20.1
PATCH v3 3/5 hw/display/milkymist-tmu2: Explicit the dependency to both X11 / OpenGL
In reply to Philippe Mathieu-DaudéThe TMU device requires both X11 and OpenGL.
--- default-configs/lm32-softmmu.mak | 2 +- hw/display/Makefile.objs | 4 ++-- hw/lm32/milkymist-hw.h | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-)
default-configs/lm32-softmmu.mak +1 -1
@@ -2,7 +2,7 @@ CONFIG_LM32=y CONFIG_MILKYMIST=y -CONFIG_MILKYMIST_TMU2=$(CONFIG_OPENGL) +CONFIG_MILKYMIST_TMU2=$(call land,$(CONFIG_X11),$(CONFIG_OPENGL)) CONFIG_FRAMEBUFFER=y CONFIG_PTIMER=y CONFIG_PFLASH_CFI01=y
hw/display/Makefile.objs +2 -2
@@ -29,8 +29,8 @@ obj-$(CONFIG_MILKYMIST) += milkymist-vgafb.o common-obj-$(CONFIG_ZAURUS) += tc6393xb.o obj-$(CONFIG_MILKYMIST_TMU2) += milkymist-tmu2.o -milkymist-tmu2.o-cflags := $(X11_CFLAGS) -milkymist-tmu2.o-libs := $(X11_LIBS) +milkymist-tmu2.o-cflags := $(X11_CFLAGS) $(OPENGL_CFLAGS) +milkymist-tmu2.o-libs := $(X11_LIBS) $(OPENGL_LIBS) obj-$(CONFIG_OMAP) += omap_dss.o obj-$(CONFIG_OMAP) += omap_lcdc.o
hw/lm32/milkymist-hw.h +2 -2
@@ -88,7 +88,7 @@ static inline DeviceState *milkymist_pfpu_create(hwaddr base,return dev; } -#ifdef CONFIG_OPENGL +#if defined(CONFIG_X11 ) && defined(CONFIG_OPENGL )#include <X11/Xlib.h> #include <epoxy/gl.h> #include <epoxy/glx.h>
@@ -103,7 +103,7 @@ static const int glx_fbconfig_attr[] = {static inline DeviceState *milkymist_tmu2_create (hwaddr base,qemu_irq irq) { -#ifdef CONFIG_OPENGL +#if defined(CONFIG_X11 ) && defined(CONFIG_OPENGL )DeviceState *dev;Display *d;GLXFBConfig *configs;
Signature · 1 line
2.20.1
PATCH v3 4/5 configure: Let SDL support be optional on OpenBSD
In reply to Philippe Mathieu-DaudéCurrently if we try to build QEMU on OpenBSD with SDL disabled, we get:
$ ./configure --cc=x86_64-unknown-openbsd6.1-gcc-4.9.4 --python=python2.7 --disable-sdl
ERROR: sdl not found or disabled, can not use sdl audio driver
Since SDL is not a requirement for OpenBSD, let it be optional. If it is not found, or the user explicitly disable it, remove it from the audio_drv_list.
If no audio backends are available, QEMU will fall back to the null driver.
Instead of displaying nothing when audio_drv_list ends up empty, display an informative "none".
This does not change the default behavior:
$ ./configure --cc=x86_64-unknown-openbsd6.1-gcc-4.9.4 --python=python2.7 SDL support yes (1.2.15) Audio drivers sdl
WARNING: Use of SDL 1.2 is deprecated and will be removed in
WARNING: future releases. Please switch to using SDL 2.0
GEN config-host.h
...
but allows to build without SDL:
$ ./configure --cc=x86_64-unknown-openbsd6.1-gcc-4.9.4 --python=python2.7 --disable-sdl WARN: sdl not found or disabled, can not use sdl audio driver SDL support no Audio drivers none GEN config-host.h ...
--- configure | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
configure +5 -1
@@ -3380,7 +3380,8 @@ for drv in $audio_drv_list; do sdl) if test "$sdl" = "no"; then - error_exit "sdl not found or disabled, can not use sdl audio driver" + echo "WARNING: SDL not found or disabled, can not use sdl audio driver" + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/sdl *//g') fi ;;
@@ -3417,6 +3418,9 @@ for drv in $audio_drv_list; do ;; esac done +if test -z "$audio_drv_list"; then + audio_drv_list="none" +fi ########################################## # BrlAPI probe
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v3 4/5] configure: Let SDL support be optional on OpenBSD
Hi,
configure for drv in $audio_drv_list; do · line 3384
Quoted 5 lines
sdl) if test "$sdl" = "no"; thenconfigure +2
-1- error_exit "sdl not found or disabled, can not use sdl audio driver" + echo "WARNING: SDL not found or disabled, can not use sdl audio driver" + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/sdl *//g')
Not needed any more.
configure for drv in $audio_drv_list; do · line 3423
Quoted 3 lines
configure +3
-0+if test -z "$audio_drv_list"; then + audio_drv_list="none" +fi
That puts "none" into the list of audio drivers. I don't think we should do that. If you want prettify the output in case audio_drv_list is empty, then just fix the output code.
cheers,
Gerd
PATCH v3 5/5 hw/display/milkymist-tmu2: Move inlined code from header to source
In reply to Philippe Mathieu-DaudéMove the complexity of milkymist_tmu2_create() into the source file. Doing so we avoid to include the X11/OpenGL headers in all LM32 devices, and we also avoid the duplicate declaration of glx_fbconfig_attr[] (it is already declared in hw/display/milkymist-tmu2.c).
Since TYPE_MILKYMIST_TMU2 is now accessible, use it.
--- MAINTAINERS | 1 + hw/display/milkymist-tmu2.c | 49 ++++++++++++++++++++++ hw/lm32/milkymist-hw.h | 63 ----------------------------- hw/lm32/milkymist.c | 1 + include/hw/display/milkymist_tmu2.h | 41 +++++++++++++++++++ 5 files changed, 92 insertions(+), 63 deletions(-) create mode 100644 include/hw/display/milkymist_tmu2.h
MAINTAINERS +1 -0
@@ -185,6 +185,7 @@ F: disas/lm32.c F: hw/lm32/ F: hw/*/lm32_* F: hw/*/milkymist-* +F: include/hw/display/milkymist_tmu2.h F: include/hw/char/lm32_juart.h F: include/hw/lm32/ F: tests/tcg/lm32/
hw/display/milkymist-tmu2.c +49 -0
58 lines not on this page · raw message
hw/lm32/milkymist-hw.h +0 -63
69 lines not on this page · raw message
hw/lm32/milkymist.c +1 -0
@@ -32,6 +32,7 @@#include "hw/loader.h" #include "elf.h" #include "milkymist-hw.h" +#include "hw/display/milkymist_tmu2.h" #include "lm32.h" #include "exec/address-spaces.h"
include/hw/display/milkymist_tmu2.h new file +41 -0
41 lines not on this page · raw message
Signature · 1 line
2.20.1
Patchew URL: https://patchew.org/QEMU/[email protected]/
Patchew URL: https://patchew.org/QEMU/[email protected]/
Hi,
This series failed the docker-mingw@fedora build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.
=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-mingw@fedora SHOW_ENV=1 J=14 === TEST SCRIPT END ===
Configure options:
--enable-werror --target-list=x86_64-softmmu,aarch64-softmmu --prefix=/tmp/qemu-test/install --python=/usr/bin/python3 --cross-prefix=x86_64-w64-mingw32- --enable-trace-backends=simple --enable-gnutls --enable-nettle --enable-curl --enable-vnc --enable-bzip2 --enable-guest-agent --with-sdlabi=2.0
ERROR: "x86_64-w64-mingw32-gcc" either does not exist or does not work
# QEMU configure log Sun Feb 3 01:24:38 UTC 2019
# Configured with: '/tmp/qemu-test/src/configure' '--enable-werror' '--target-list=x86_64-softmmu,aarch64-softmmu' '--prefix=/tmp/qemu-test/install' '--python=/usr/bin/python3' '--cross-prefix=x86_64-w64-mingw32-' '--enable-trace-backends=simple' '--enable-gnutls' '--enable-nettle' '--enable-curl' '--enable-vnc' '--enable-bzip2' '--enable-guest-agent' '--with-sdlabi=2.0'
---
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 636 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 638 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 640 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 642 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 644 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 646 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 648 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 650 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 652 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 654 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 688 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 690 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 696 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 702 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 708 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 710 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 716 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 722 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 619 724 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
funcs: do_compiler do_cc compile_object main
lines: 92 122 1820 0
x86_64-w64-mingw32-gcc -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
ccache: error: Failed to create temporary file for /var/tmp/ccache/tmp/qemu-conf.stdout: Permission denied
Failed to run 'configure'
Traceback (most recent call last):
File "./tests/docker/docker.py", line 563, in <module>
The full log is available at
http://patchew.org/logs/[email protected]/testing.docker-mingw@fedora/?type=message.
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to [email protected]