imx: add i.MX8MM support
Subsystems (9)
PATCH 20/20 imx: add i.MX8MM EVK board support
In reply to Peng FanHi Peng,
Quoted 20 lines
Add i.MX8MM EVK board support.
Add board and SoC dts
Add ddr training code
support SD/MMC/GPIO/PINCTRL/UARTU-Boot SPL 2019.01-00148-g1179cffe66 (Jan 28 2019 - 17:37:34 +0800) Normal Boot
Trying to boot from MMC1U-Boot 2019.01-00148-g1179cffe66 (Jan 28 2019 - 17:37:34 +0800)
CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz Reset cause: POR Model: NXP i.MX8MM EVK board DRAM: 2 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 In: serial Out: serial Err: serial
Quoted 1 line
DM
You set/adjust latter in the code the fec network driver. Why it is not found?
Could you also share the output of "dm tree" command?
I suppose/guess that this board shall support as much as possible of the DT/DM conversions?
Quoted 1,020 lines
Hit any key to stop autoboot: 2
Signed-off-by Peng Fan <[email protected]>--- arch/arm/dts/fsl-imx8mm-evk.dts | 203 +++ arch/arm/dts/fsl-imx8mm.dtsi | 586 ++++++++ arch/arm/mach-imx/imx8m/Kconfig | 7 + board/freescale/imx8mm_evk/Kconfig | 12 + board/freescale/imx8mm_evk/MAINTAINERS | 6 + board/freescale/imx8mm_evk/Makefile | 12 + board/freescale/imx8mm_evk/imx8mm_evk.c | 144 ++ board/freescale/imx8mm_evk/lpddr4_timing.c | 1980 ++++++++++++++++++++++++++++ board/freescale/imx8mm_evk/spl.c | 187 +++ configs/imx8mm_evk_defconfig | 41 + include/configs/imx8mm_evk.h | 221 ++++ 11 fileschanged, 3399 insertions(+) create mode 100644
arch/arm/dts/fsl-imx8mm-evk.dtscreate mode 100644arch/arm/dts/fsl-imx8mm.dtsicreate mode 100644 board/freescale/imx8mm_evk/Kconfig create mode 100644 board/freescale/imx8mm_evk/MAINTAINERS create mode 100644 board/freescale/imx8mm_evk/Makefile create mode 100644board/freescale/imx8mm_evk/imx8mm_evk.ccreate mode 100644board/freescale/imx8mm_evk/lpddr4_timing.ccreate mode 100644board/freescale/imx8mm_evk/spl.ccreate mode 100644 configs/imx8mm_evk_defconfig create mode 100644include/configs/imx8mm_evk.h(quoted diff) +0
-0
b/arch/arm/dts/fsl-imx8mm-evk.dtsnew file mode 100644 index 0000000000..df409eca47arch/arm/dts/fsl-imx8mm-evk.dts new file +41
-0@@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include "fsl-imx8mm.dtsi" + +/ { + model = "NXP i.MX8MM EVK board"; + compatible = "fsl,imx8mm-evk", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + off-on-delay = <20000>; + enable-active-high; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + + imx8mm-evk { + pinctrl_fec1: fec1grp { + fsl,pins = < +
MX8MM_IOMUXC_ENET_MDC_ENET1_MDC0x3
+MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO0x3
+MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD30x1f
+MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD20x1f
+MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD10x1f
+MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD00x1f
+MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD30x91
+MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD20x91
+MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD10x91
+MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD00x91
+MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC0x1f
+MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC0x91
+MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL0x91
+MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL0x1f
+MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO220x19arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < +
MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO160x19arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < +
MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX0x140
+MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX0x140arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < +
MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO150x1c4
+MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO190x41arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < +
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK0x190
+MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD0x1d0
+MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA00x1d0
+MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA10x1d0
+MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA20x1d0
+MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA30x1d0
+MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT0x1d0arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < +
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK0x194
+MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD0x1d4
+MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA00x1d4
+MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA10x1d4
+MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA20x1d4
+MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA30x1d4
+MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT0x1d0arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < +
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK0x196
+MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD0x1d6
+MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA00x1d6
+MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA10x1d6
+MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA20x1d6
+MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA30x1d6
+MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT0x1d0arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < +
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK0x190
+MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD0x1d0
+MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA00x1d0
+MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA10x1d0
+MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA20x1d0
+MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA30x1d0
+MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA40x1d0
+MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA50x1d0
+MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA60x1d0
+MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA70x1d0
+MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE0x190arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < +
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK0x194
+MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD0x1d4
+MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA00x1d4
+MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA10x1d4
+MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA20x1d4
+MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA30x1d4
+MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA40x1d4
+MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA50x1d4
+MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA60x1d4
+MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA70x1d4
+MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE0x194arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < +
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK0x196
+MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD0x1d6
+MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA00x1d6
+MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA10x1d6
+MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA20x1d6
+MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA30x1d6
+MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA40x1d6
+MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA50x1d6
+MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA60x1d6
+MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA70x1d6
+MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE0x196arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < +
MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B0xc6arch/arm/dts/fsl-imx8mm-evk.dts new file +38
-0+ >; + }; + }; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +};(quoted diff) +0
-0
b/arch/arm/dts/fsl-imx8mm.dtsinew file mode 100644 index 0000000000..8a808f856darch/arm/dts/fsl-imx8mm.dtsi new file +143
-0@@ -0,0 +1,586 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2017-2019 NXP + */ + +#include <dt-bindings/clock/imx8mm-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/pins-imx8mm.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "fsl,imx8mm"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + A53_0: cpu at 0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_1: cpu at 1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_2: cpu at 2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_3: cpu at 3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + memory at 40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc_32k: clock at 0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc_32k"; + }; + + osc_24m: clock at 1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc_24m"; + }; + + clk_ext1: clock at 2 { + compatible = "fixed-clock"; + reg = <3>; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext1"; + }; + + clk_ext2: clock at 3 { + compatible = "fixed-clock"; + reg = <4>; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext2"; + }; + + clk_ext3: clock at 4 { + compatible = "fixed-clock"; + reg = <5>; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext3"; + }; + + clk_ext4: clock at 5 { + compatible = "fixed-clock"; + reg = <6>; + #clock-cells = <0>; + clock-frequency= <133000000>; + clock-output-names = "clk_ext4"; + }; + }; + + gic: interrupt-controller at 38800000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */ + <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base +
SGI_base) */arch/arm/dts/fsl-imx8mm.dtsi new file +14
-0+ #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 + (GIC_CPU_MASK_SIMPLE(6) |
IRQ_TYPE_LEVEL_HIGH)>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>,<
&A53_3>;arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) |
IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) |
IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) |
IRQ_TYPE_LEVEL_LOW)>, /* Virtual */arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) |
IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */arch/arm/dts/fsl-imx8mm.dtsi new file +19
-0+ clock-frequency = <8000000>; + arm,no-tick-in-suspend; + }; + + soc at 0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + aips1: bus at 30000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x30000000 0x0 0x400000>; + ranges; + + gpio1: gpio at 30200000 { + compatible = "fsl,imx8mm-gpio","fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30200000 0x0 0x10000>; + interrupts = <GIC_SPI 64
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 65
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio at 30210000 { + compatible = "fsl,imx8mm-gpio","fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30210000 0x0 0x10000>; + interrupts = <GIC_SPI 66
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 67
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio at 30220000 { + compatible = "fsl,imx8mm-gpio","fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30220000 0x0 0x10000>; + interrupts = <GIC_SPI 68
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 69
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio at 30230000 { + compatible = "fsl,imx8mm-gpio","fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30230000 0x0 0x10000>; + interrupts = <GIC_SPI 70
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 71
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio at 30240000 { + compatible = "fsl,imx8mm-gpio","fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30240000 0x0 0x10000>; + interrupts = <GIC_SPI 72
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 73
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +10
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wdog1: wdog at 30280000 { + compatible = "fsl,imx21-wdt"; + reg = <0 0x30280000 0 0x10000>; + interrupts = <GIC_SPI 78
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_WDOG1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ status = "disabled"; + }; + + wdog2: wdog at 30290000 { + compatible = "fsl,imx21-wdt"; + reg = <0 0x30290000 0 0x10000>; + interrupts = <GIC_SPI 79
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_WDOG2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ status = "disabled"; + }; + + wdog3: wdog at 302a0000 { + compatible = "fsl,imx21-wdt"; + reg = <0 0x302a0000 0 0x10000>; + interrupts = <GIC_SPI 10
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_WDOG3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ status = "disabled"; + }; + + sdma2: dma-controller at 302c0000 { + compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x302c0000 0x0 0x10000>; + interrupts = <GIC_SPI 103
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_SDMA2_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_SDMA2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +3
-0+ clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name ="imx/sdma/sdma-imx7d.bin";
arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ fsl,ratio-1-1; + status = "okay"; + }; + + sdma3: dma-controller at 302b0000 { + compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x302b0000 0x0 0x10000>; + interrupts = <GIC_SPI 34
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_SDMA3_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ <&clk IMX8MM_CLK_SDMA3_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name ="imx/sdma/sdma-imx7d.bin";
arch/arm/dts/fsl-imx8mm.dtsi new file +11
-0+ fsl,ratio-1-1; + status = "okay"; + }; + + iomuxc: pinctrl at 30330000 { + compatible = "fsl,imx8mm-iomuxc"; + reg = <0x0 0x30330000 0x0 0x10000>; + }; + + gpr: iomuxc-gpr at 30340000 { + compatible ="fsl,imx8mm-iomuxc-gpr", "syscon";
arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ reg = <0x0 0x30340000 0x0 0x10000>; + }; + + ocotp: ocotp-ctrl at 30350000 { + compatible = "fsl,imx8mq-ocotp","fsl,imx7d-ocotp", "syscon";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0 0x30350000 0 0x10000>; + clocks = <&clk
IMX8MM_CLK_OCOTP_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ /* For nvmem subnodes */ + #address-cells = <1>; + #size-cells = <1>; + }; + + anatop: anatop at 30360000 { + compatible = "fsl,imx8mm-anatop","syscon", "simple-bus";
arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ reg = <0x0 0x30360000 0x0 0x10000>; + }; + + snvs: snvs at 30370000 { + compatible ="fsl,sec-v4.0-mon","syscon", "simple-mfd";
arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ reg = <0x0 0x30370000 0x0 0x10000>; + + snvs_rtc: snvs-rtc-lp{ + compatible ="fsl,sec-v4.0-mon-rtc-lp";
arch/arm/dts/fsl-imx8mm.dtsi new file +3
-0+ regmap =<&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI 19
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 20
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ }; + + snvs_pwrkey: snvs-powerkey { + compatible ="fsl,sec-v4.0-pwrkey";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ regmap = <&snvs>; + interrupts = <GIC_SPI 4
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +10
-0+ linux,keycode = <KEY_POWER>; + wakeup-source; + }; + }; + + clk: clock-controller at 30380000 { + compatible = "fsl,imx8mm-ccm"; + reg = <0x0 0x30380000 0x0 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>,<
&clk_ext1>, <&clk_ext2>,arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ <&clk_ext3>, <&clk_ext4>; + clock-names = "osc_32k", "osc_24m","
clk_ext1", "clk_ext2",arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ "clk_ext3", "clk_ext4"; + }; + + src: src at 30390000 { + compatible = "fsl,imx8mm-src","syscon";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30390000 0x0 0x10000>; + interrupts = <GIC_SPI 89
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ #reset-cells = <1>; + }; + + gpc: gpc at 303a0000 { + compatible = "fsl,imx8mm-gpc","syscon";
arch/arm/dts/fsl-imx8mm.dtsi new file +3
-0+ reg = <0x0 0x303a0000 0x0 0x10000>; + interrupt-controller; + interrupts = <GIC_SPI 87
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +13
-0+ #interrupt-cells = <3>; + }; + }; + + aips2: bus at 30400000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x30400000 0x0 0x400000>; + ranges; + + pwm1: pwm at 30660000 { + compatible = "fsl,imx8mm-pwm","fsl,imx27-pwm";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30660000 0x0 0x10000>; + interrupts = <GIC_SPI 81
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +9
-0+ clocks = <&clk IMX8MM_CLK_PWM1_ROOT>, + <&clk IMX8MM_CLK_PWM1_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm at 30670000 { + compatible = "fsl,imx8mm-pwm","fsl,imx27-pwm";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30670000 0x0 0x10000>; + interrupts = <GIC_SPI 82
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +9
-0+ clocks = <&clk IMX8MM_CLK_PWM2_ROOT>, + <&clk IMX8MM_CLK_PWM2_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm at 30680000 { + compatible = "fsl,imx8mm-pwm","fsl,imx27-pwm";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30680000 0x0 0x10000>; + interrupts = <GIC_SPI 83
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +9
-0+ clocks = <&clk IMX8MM_CLK_PWM3_ROOT>, + <&clk IMX8MM_CLK_PWM3_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm at 30690000 { + compatible = "fsl,imx8mm-pwm","fsl,imx27-pwm";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30690000 0x0 0x10000>; + interrupts = <GIC_SPI 84
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +19
-0+ clocks = <&clk IMX8MM_CLK_PWM4_ROOT>, + <&clk IMX8MM_CLK_PWM4_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + }; + + aips3: bus at 30800000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x30800000 0x0 0x400000>; + ranges; + + ecspi1: ecspi at 30820000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-ecspi","fsl,imx51-ecspi";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30820000 0x0 0x10000>; + interrupts = <GIC_SPI 31
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_ECSPI1_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_ECSPI1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: ecspi at 30830000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-ecspi","fsl,imx51-ecspi";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30830000 0x0 0x10000>; + interrupts = <GIC_SPI 32
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_ECSPI2_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_ECSPI2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: ecspi at 30840000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-ecspi","fsl,imx51-ecspi";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30840000 0x0 0x10000>; + interrupts = <GIC_SPI 33
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_ECSPI3_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_ECSPI3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial at 30860000 { + compatible = "fsl,imx8mm-uart", + "fsl,imx6q-uart","fsl,imx21-uart";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30860000 0x0 0x10000>; + interrupts = <GIC_SPI 26
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_UART1_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_UART1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial at 30880000 { + compatible = "fsl,imx8mm-uart", + "fsl,imx6q-uart","fsl,imx21-uart";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30880000 0x0 0x10000>; + interrupts = <GIC_SPI 28
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_UART3_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_UART3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial at 30890000 { + compatible = "fsl,imx8mm-uart", + "fsl,imx6q-uart","fsl,imx21-uart";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30890000 0x0 0x10000>; + interrupts = <GIC_SPI 27
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_UART2_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_UART2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c1: i2c at 30a20000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-i2c","fsl,imx21-i2c";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30a20000 0x0 0x10000>; + interrupts = <GIC_SPI 35
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clocks = <&clk IMX8MM_CLK_I2C1_ROOT>; + status = "disabled"; + }; + + i2c2: i2c at 30a30000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-i2c","fsl,imx21-i2c";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30a30000 0x0 0x10000>; + interrupts = <GIC_SPI 36
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clocks = <&clk IMX8MM_CLK_I2C2_ROOT>; + status = "disabled"; + }; + + i2c3: i2c at 30a40000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-i2c","fsl,imx21-i2c";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30a40000 0x0 0x10000>; + interrupts = <GIC_SPI 37
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clocks = <&clk IMX8MM_CLK_I2C3_ROOT>; + status = "disabled"; + }; + + i2c4: i2c at 30a50000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-i2c","fsl,imx21-i2c";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30a50000 0x0 0x10000>; + interrupts = <GIC_SPI 38
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clocks = <&clk IMX8MM_CLK_I2C4_ROOT>; + status = "disabled"; + }; + + uart4: serial at 30a60000 { + compatible = "fsl,imx8mq-uart", + "fsl,imx6q-uart","fsl,imx21-uart";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30a60000 0x0 0x10000>; + interrupts = <GIC_SPI 29
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_UART4_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_UART4_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + usdhc1: mmc at 30b40000 { + compatible = "fsl,imx8mq-usdhc","fsl,imx7d-usdhc";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30b40000 0x0 0x10000>; + interrupts = <GIC_SPI 22
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk
IMX8MM_CLK_NAND_USDHC_BUS>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_USDHC1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&clk
IMX8MM_CLK_USDHC1>;arch/arm/dts/fsl-imx8mm.dtsi new file +9
-0+ assigned-clock-rates = <400000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: mmc at 30b50000 { + compatible = "fsl,imx8mq-usdhc","fsl,imx7d-usdhc";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30b50000 0x0 0x10000>; + interrupts = <GIC_SPI 23
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk
IMX8MM_CLK_NAND_USDHC_BUS>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_USDHC2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +9
-0+ clock-names = "ipg", "ahb", "per"; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: mmc at 30b60000 { + compatible = "fsl,imx8mq-usdhc","fsl,imx7d-usdhc";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30b60000 0x0 0x10000>; + interrupts = <GIC_SPI 24
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk
IMX8MM_CLK_NAND_USDHC_BUS>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_USDHC3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&clk
IMX8MM_CLK_USDHC3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +9
-0+ assigned-clock-rates = <400000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + }; + }; +};(quoted diff) +0
-0b/arch/arm/mach-imx/imx8m/Kconfig index
35c978e863..f520075875100644
arch/arm/mach-imx/imx8m/Kconfig config TARGET_IMX8MQ_EVK · line 31
Quoted 8 lines
arch/arm/mach-imx/imx8m/Kconfig +5
-0@@ -24,8 +24,15 @@ config TARGET_IMX8MQ_EVK select IMX8MQ select IMX8M_LPDDR4 +config TARGET_IMX8MM_EVK + bool "imx8mm LPDDR4 EVK board" + select IMX8MM + select SUPPORT_SPL + select IMX8M_LPDDR4
Here you shall put the select DM_{UART,USDHC, etc}
Quoted 122 lines
arch/arm/mach-imx/imx8m/Kconfig +2
-0+ endchoice source "board/freescale/imx8mq_evk/Kconfig" +source "board/freescale/imx8mm_evk/Kconfig" endif(quoted diff) +0
-0b/board/freescale/imx8mm_evk/Kconfig new file mode 100644 index 0000000000..299691a619
board/freescale/imx8mm_evk/Kconfig new file +12
-0@@ -0,0 +1,12 @@ +if TARGET_IMX8MM_EVK + +config SYS_BOARD + default "imx8mm_evk" + +config SYS_VENDOR + default "freescale" + +config SYS_CONFIG_NAME + default "imx8mm_evk" + +endif(quoted diff) +0
-0b/board/freescale/imx8mm_evk/MAINTAINERS new file mode 100644 index 0000000000..b031bb0674
board/freescale/imx8mm_evk/MAINTAINERS new file +6
-0@@ -0,0 +1,6 @@ +i.MX8MM EVK BOARD +M: Peng Fan <[email protected]> +S: Maintained +F: board/freescale/imx8mm_evk/ +F: include/configs/imx8mm_evk.h +F: configs/imx8mm_evk_defconfig(quoted diff) +0
-0b/board/freescale/imx8mm_evk/Makefile new file mode 100644 index 0000000000..1db7b62caf
board/freescale/imx8mm_evk/Makefile new file +12
-0@@ -0,0 +1,12 @@ +# +# Copyright 2018 NXP +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += imx8mm_evk.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o +endif(quoted diff) +0
-0
b/board/freescale/imx8mm_evk/imx8mm_evk.cnew file mode 100644 index 0000000000..a681aca04dboard/freescale/imx8mm_evk/imx8mm_evk.c new file +27
-0@@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2018 NXP +*/ + +#include <common.h> +#include <malloc.h> +#include <errno.h> +#include <asm/io.h> +#include <miiphy.h> +#include <netdev.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm-generic/gpio.h> +#include <fsl_esdhc.h> +#include <mmc.h> +#include <asm/arch/imx8mm_pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-imx/gpio.h> +#include <asm/mach-imx/mxc_i2c.h> +#include <asm/arch/clock.h> +#include <spl.h> +#include <asm/mach-imx/dma.h> + +DECLARE_GLOBAL_DATA_PTR ; + +#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) +#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE |
PAD_CTL_PUE|PAD_CTL_PE) +board/freescale/imx8mm_evk/imx8mm_evk.c new file +7
-0+static iomux_v3_cfg_t const uart_pads[] = { +IMX8MM_PAD_UART2_RXD_UART2_RX |MUX_PAD_CTRL (UART_PAD_CTRL ), +IMX8MM_PAD_UART2_TXD_UART2_TX |MUX_PAD_CTRL (UART_PAD_CTRL ), +}; + +static iomux_v3_cfg_t const wdog_pads[] = { + IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B |
MUX_PAD_CTRL(WDOG_PAD_CTRL), +};board/freescale/imx8mm_evk/imx8mm_evk.c new file +6
-0+ +int board_early_init_f (void ) +{ +struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR ; + + imx_iomux_v3_setup_multiple_pads(wdog_pads,
ARRAY_SIZE(wdog_pads)); +board/freescale/imx8mm_evk/imx8mm_evk.c new file +3
-0+set_wdog_reset (wdog); + + imx_iomux_v3_setup_multiple_pads(uart_pads,
ARRAY_SIZE(uart_pads)); +board/freescale/imx8mm_evk/imx8mm_evk.c new file +14
-0+return 0 ; +} + +#ifdef CONFIG_BOARD_POSTCLK_INIT +int board_postclk_init (void ) +{ +/* TODO */ +return 0 ; +} +#endif + +int dram_init (void ) +{ +/* rom_pointer[1] contains the size of TEE occupies */
board/freescale/imx8mm_evk/imx8mm_evk.c line 71
Quoted 10 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +10
-0+if (rom_pointer[1 ]) + gd->ram_size =PHYS_SDRAM_SIZE - rom_pointer[1 ]; +else + gd->ram_size =PHYS_SDRAM_SIZE ; + +return 0 ; +} + +#ifdef CONFIG_OF_BOARD_SETUP +int ft_board_setup (void *blob,bd_t *bd)
^^^ - fdt_board_setup ?
board/freescale/imx8mm_evk/imx8mm_evk.c line 80
Quoted 9 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +9
-0+{ +return 0 ; +} +#endif + +#ifdef CONFIG_FEC_MXC +#define FEC_RST_PAD IMX_GPIO_NR(4, 22) +static iomux_v3_cfg_t const fec1_rst_pads[] = { + IMX8MM_PAD_SAI2_RXC_GPIO4_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL),
This shall be done with fsl_fec.c DM driver - there is support for adding reset pin (to dts).
board/freescale/imx8mm_evk/imx8mm_evk.c line 92
Quoted 12 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +12
-0+}; + +static void setup_iomux_fec (void ) +{ +imx_iomux_v3_setup_multiple_pads (fec1_rst_pads, +ARRAY_SIZE (fec1_rst_pads)); + +gpio_request (FEC_RST_PAD ,"fec1_rst" ); +gpio_direction_output (FEC_RST_PAD ,0 ); +udelay (500 ); +gpio_direction_output (FEC_RST_PAD ,1 ); +}
This shall be replaced with DM/DTS of the fsl_fec.c driver. Please also note that there are (at least on imx6q) some timing issues when we move the code to DM/DTS (some delay is needed).
Quoted 20 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +5
-0+ +static int setup_fec (void ) +{ + struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs + = (struct iomuxc_gpr_base_regs*)IOMUXC_GPR_BASE_ADDR; +
board/freescale/imx8mm_evk/imx8mm_evk.c new file +5
-0+setup_iomux_fec (); + +/* Use 125M anatop REF_CLK1 for ENET1, not from external */ + clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], + IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_SHIFT,0);
board/freescale/imx8mm_evk/imx8mm_evk.c new file +6
-0+return set_clk_enet (ENET_125MHZ ); +} + +int board_phy_config (struct phy_device *phydev) +{ +/* enable rgmii rxc skew and phy mode select to RGMII copper */
board/freescale/imx8mm_evk/imx8mm_evk.c new file +1
-0+phy_write (phydev,MDIO_DEVAD_NONE ,0x1d ,0x1f );
board/freescale/imx8mm_evk/imx8mm_evk.c line 120
Quoted 10 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +10
-0+phy_write (phydev,MDIO_DEVAD_NONE ,0x1e ,0x8 ); + +phy_write (phydev,MDIO_DEVAD_NONE ,0x1d ,0x00 ); +phy_write (phydev,MDIO_DEVAD_NONE ,0x1e ,0x82ee ); +phy_write (phydev,MDIO_DEVAD_NONE ,0x1d ,0x05 ); +phy_write (phydev,MDIO_DEVAD_NONE ,0x1e ,0x100 ); + +if (phydev->drv->config) + phydev->drv->config (phydev); +return 0 ;
Which PHY do you use? E.g. KSZ... support passing those values via DTS.
Quoted 30 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +24
-0+} +#endif + +int board_init (void ) +{ +#ifdef CONFIG_FEC_MXC +setup_fec (); +#endif +return 0 ; +} + +int board_mmc_get_env_dev (int devno) +{ +return devno -1 ; +} + +int board_late_init (void ) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +env_set ("board_name" ,"EVK" ); +env_set ("board_rev" ,"iMX8MM" ); +#endif +return 0 ; +}(quoted diff) +0
-0
b/board/freescale/imx8mm_evk/lpddr4_timing.cnew file mode 100644 index 0000000000..4bade5bf74
board/freescale/imx8mm_evk/lpddr4_timing.c line 3
Quoted 3 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +3
-0@@ -0,0 +1,1980 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2018 NXP
Author is missing.
Quoted 306 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +306
-0+*/ + +#include <linux/kernel.h> +#include <common.h> +#include <asm/arch/ddr.h> +#include <asm/arch/lpddr4_define.h> + +struct dram_cfg_param lpddr4_ddrc_cfg[] = { +/* Start to config, default 3200mbps */ + {DDRC_DBG1 (0 ),0x00000001 }, + {DDRC_PWRCTL (0 ),0x00000001 }, + {DDRC_MSTR (0 ),0xa1080020 }, + {DDRC_RFSHTMG (0 ),0x005b00d2 }, + {DDRC_INIT0 (0 ),0xC003061B }, + {DDRC_INIT1 (0 ),0x009D0000 }, + {DDRC_INIT3 (0 ),0x00D4002D }, + {DDRC_INIT4 (0 ), (LPDDR4_MR3 <<16 ) |0x0000 }, + {DDRC_INIT6 (0 ),0x0066004a }, + {DDRC_INIT7 (0 ),0x0006004a }, + + {DDRC_DRAMTMG0 (0 ),0x1A201B22 }, + {DDRC_DRAMTMG1 (0 ),0x00060633 }, + {DDRC_DRAMTMG3 (0 ),0x00C0C000 }, + {DDRC_DRAMTMG4 (0 ),0x0F04080F }, + {DDRC_DRAMTMG5 (0 ),0x02040C0C }, + {DDRC_DRAMTMG6 (0 ),0x01010007 }, + {DDRC_DRAMTMG7 (0 ),0x00000401 }, + {DDRC_DRAMTMG12 (0 ),0x00020600 }, + {DDRC_DRAMTMG13 (0 ),0x0C100002 }, + {DDRC_DRAMTMG14 (0 ),0x000000E6 }, + {DDRC_DRAMTMG17 (0 ),0x00A00050 }, + + {DDRC_ZQCTL0 (0 ),0x03200018 }, + {DDRC_ZQCTL1 (0 ),0x028061A8 }, + {DDRC_ZQCTL2 (0 ),0x00000000 }, + + {DDRC_DFITMG0 (0 ),0x0497820A }, + {DDRC_DFITMG2 (0 ),0x0000170A }, + {DDRC_DRAMTMG2 (0 ),0x070E171a }, + {DDRC_DBICTL (0 ),0x00000001 }, + + {DDRC_DFITMG1 (0 ),0x00080303 }, + {DDRC_DFIUPD0 (0 ),0xE0400018 }, + {DDRC_DFIUPD1 (0 ),0x00DF00E4 }, + {DDRC_DFIUPD2 (0 ),0x80000000 }, + {DDRC_DFIMISC (0 ),0x00000011 }, + + {DDRC_DFIPHYMSTR (0 ),0x00000000 }, + {DDRC_RANKCTL (0 ),0x00000c99 }, + +/* address mapping */ + {DDRC_ADDRMAP0 (0 ),0x0000001f }, + {DDRC_ADDRMAP1 (0 ),0x00080808 }, + {DDRC_ADDRMAP2 (0 ),0x00000000 }, + {DDRC_ADDRMAP3 (0 ),0x00000000 }, + {DDRC_ADDRMAP4 (0 ),0x00001f1f }, + {DDRC_ADDRMAP5 (0 ),0x07070707 }, + {DDRC_ADDRMAP6 (0 ),0x07070707 }, + {DDRC_ADDRMAP7 (0 ),0x00000f0f }, + +/* performance setting */ + {DDRC_SCHED (0 ),0x29001701 }, + {DDRC_SCHED1 (0 ),0x0000002c }, + {DDRC_PERFHPR1 (0 ),0x04000030 }, + {DDRC_PERFLPR1 (0 ),0x900093e7 }, + {DDRC_PERFWR1 (0 ),0x20005574 }, + {DDRC_PCCFG (0 ),0x00000111 }, + {DDRC_PCFGW_0 (0 ),0x000072ff }, + {DDRC_PCFGQOS0_0 (0 ),0x02100e07 }, + {DDRC_PCFGQOS1_0 (0 ),0x00620096 }, + {DDRC_PCFGWQOS0_0 (0 ),0x01100e07 }, + {DDRC_PCFGWQOS1_0 (0 ),0x00c8012c }, + +/* frequency P1&P2 */ +/* Frequency 1: 400mbps */ + {DDRC_FREQ1_DRAMTMG0 (0 ),0x0d0b010c }, + {DDRC_FREQ1_DRAMTMG1 (0 ),0x00030410 }, + {DDRC_FREQ1_DRAMTMG2 (0 ),0x0203090c }, + {DDRC_FREQ1_DRAMTMG3 (0 ),0x00505006 }, + {DDRC_FREQ1_DRAMTMG4 (0 ),0x05040305 }, + {DDRC_FREQ1_DRAMTMG5 (0 ),0x0d0e0504 }, + {DDRC_FREQ1_DRAMTMG6 (0 ),0x0a060004 }, + {DDRC_FREQ1_DRAMTMG7 (0 ),0x0000090e }, + {DDRC_FREQ1_DRAMTMG14 (0 ),0x00000032 }, + {DDRC_FREQ1_DRAMTMG15 (0 ),0x00000000 }, + {DDRC_FREQ1_DRAMTMG17 (0 ),0x0036001b }, + {DDRC_FREQ1_DERATEINT (0 ),0x7e9fbeb1 }, + {DDRC_FREQ1_DFITMG0 (0 ),0x03818200 }, + {DDRC_FREQ1_DFITMG2 (0 ),0x00000000 }, + {DDRC_FREQ1_RFSHTMG (0 ),0x000C001c }, + {DDRC_FREQ1_INIT3 (0 ),0x00840000 }, + {DDRC_FREQ1_INIT4 (0 ),0x00310000 }, + {DDRC_FREQ1_INIT6 (0 ),0x0066004a }, + {DDRC_FREQ1_INIT7 (0 ),0x0006004a }, + +/* Frequency 2: 100mbps */ + {DDRC_FREQ2_DRAMTMG0 (0 ),0x0d0b010c }, + {DDRC_FREQ2_DRAMTMG1 (0 ),0x00030410 }, + {DDRC_FREQ2_DRAMTMG2 (0 ),0x0203090c }, + {DDRC_FREQ2_DRAMTMG3 (0 ),0x00505006 }, + {DDRC_FREQ2_DRAMTMG4 (0 ),0x05040305 }, + {DDRC_FREQ2_DRAMTMG5 (0 ),0x0d0e0504 }, + {DDRC_FREQ2_DRAMTMG6 (0 ),0x0a060004 }, + {DDRC_FREQ2_DRAMTMG7 (0 ),0x0000090e }, + {DDRC_FREQ2_DRAMTMG14 (0 ),0x00000032 }, + {DDRC_FREQ2_DRAMTMG17 (0 ),0x0036001b }, + {DDRC_FREQ2_DERATEINT (0 ),0x7e9fbeb1 }, + {DDRC_FREQ2_DFITMG0 (0 ),0x03818200 }, + {DDRC_FREQ2_DFITMG2 (0 ),0x00000000 }, + {DDRC_FREQ2_RFSHTMG (0 ),0x0003800c }, + {DDRC_FREQ2_RFSHTMG (0 ),0x00030007 }, + {DDRC_FREQ2_INIT3 (0 ),0x00840000 }, + {DDRC_FREQ2_INIT4 (0 ),0x00310008 }, + {DDRC_FREQ2_INIT4 (0 ), (LPDDR4_MR3 <<16 ) |0x0000 }, + {DDRC_FREQ2_INIT6 (0 ),0x0066004a }, + {DDRC_FREQ2_INIT7 (0 ),0x0006004a }, + +/* boot start point */ + {DDRC_MSTR2 (0 ),0x2 },//DDRC_MSTR2 +}; + +/* PHY Initialize Configuration */ +struct dram_cfg_param lpddr4_ddrphy_cfg[] = { + {0x1005f ,0x1ff }, + {0x1015f ,0x1ff }, + {0x1105f ,0x1ff }, + {0x1115f ,0x1ff }, + {0x1205f ,0x1ff }, + {0x1215f ,0x1ff }, + {0x1305f ,0x1ff }, + {0x1315f ,0x1ff }, + + {0x11005f ,0x1ff }, + {0x11015f ,0x1ff }, + {0x11105f ,0x1ff }, + {0x11115f ,0x1ff }, + {0x11205f ,0x1ff }, + {0x11215f ,0x1ff }, + {0x11305f ,0x1ff }, + {0x11315f ,0x1ff }, + + {0x21005f ,0x1ff }, + {0x21015f ,0x1ff }, + {0x21105f ,0x1ff }, + {0x21115f ,0x1ff }, + {0x21205f ,0x1ff }, + {0x21215f ,0x1ff }, + {0x21305f ,0x1ff }, + {0x21315f ,0x1ff }, + + {0x55 ,0x1ff }, + {0x1055 ,0x1ff }, + {0x2055 ,0x1ff }, + {0x3055 ,0x1ff }, + {0x4055 ,0x1ff }, + {0x5055 ,0x1ff }, + {0x6055 ,0x1ff }, + {0x7055 ,0x1ff }, + {0x8055 ,0x1ff }, + {0x9055 ,0x1ff }, + + {0x200c5 ,0x19 }, + {0x1200c5 ,0x7 }, + {0x2200c5 ,0x7 }, + + {0x2002e ,0x2 }, + {0x12002e ,0x2 }, + {0x22002e ,0x2 }, + + {0x90204 ,0x0 }, + {0x190204 ,0x0 }, + {0x290204 ,0x0 }, + + {0x20024 ,0xab }, + {0x2003a ,0x0 }, + + {0x120024 ,0xab }, + {0x2003a ,0x0 }, + + {0x220024 ,0xab }, + {0x2003a ,0x0 }, + + {0x20056 ,0x3 }, + {0x120056 ,0xa }, + {0x220056 ,0xa }, + + {0x1004d ,0xe00 }, + {0x1014d ,0xe00 }, + {0x1104d ,0xe00 }, + {0x1114d ,0xe00 }, + {0x1204d ,0xe00 }, + {0x1214d ,0xe00 }, + {0x1304d ,0xe00 }, + {0x1314d ,0xe00 }, + + {0x11004d ,0xe00 }, + {0x11014d ,0xe00 }, + {0x11104d ,0xe00 }, + {0x11114d ,0xe00 }, + {0x11204d ,0xe00 }, + {0x11214d ,0xe00 }, + {0x11304d ,0xe00 }, + {0x11314d ,0xe00 }, + + {0x21004d ,0xe00 }, + {0x21014d ,0xe00 }, + {0x21104d ,0xe00 }, + {0x21114d ,0xe00 }, + {0x21204d ,0xe00 }, + {0x21214d ,0xe00 }, + {0x21304d ,0xe00 }, + {0x21314d ,0xe00 }, + + {0x10049 ,0xfbe }, + {0x10149 ,0xfbe }, + {0x11049 ,0xfbe }, + {0x11149 ,0xfbe }, + {0x12049 ,0xfbe }, + {0x12149 ,0xfbe }, + {0x13049 ,0xfbe }, + {0x13149 ,0xfbe }, + + {0x110049 ,0xfbe }, + {0x110149 ,0xfbe }, + {0x111049 ,0xfbe }, + {0x111149 ,0xfbe }, + {0x112049 ,0xfbe }, + {0x112149 ,0xfbe }, + {0x113049 ,0xfbe }, + {0x113149 ,0xfbe }, + + {0x210049 ,0xfbe }, + {0x210149 ,0xfbe }, + {0x211049 ,0xfbe }, + {0x211149 ,0xfbe }, + {0x212049 ,0xfbe }, + {0x212149 ,0xfbe }, + {0x213049 ,0xfbe }, + {0x213149 ,0xfbe }, + + {0x43 ,0x63 }, + {0x1043 ,0x63 }, + {0x2043 ,0x63 }, + {0x3043 ,0x63 }, + {0x4043 ,0x63 }, + {0x5043 ,0x63 }, + {0x6043 ,0x63 }, + {0x7043 ,0x63 }, + {0x8043 ,0x63 }, + {0x9043 ,0x63 }, + + {0x20018 ,0x3 }, + {0x20075 ,0x4 }, + {0x20050 ,0x0 }, + {0x20008 ,0x2ee }, + {0x120008 ,0x64 }, + {0x220008 ,0x19 }, + {0x20088 ,0x9 }, + + {0x200b2 ,0x1d4 }, + {0x10043 ,0x5a1 }, + {0x10143 ,0x5a1 }, + {0x11043 ,0x5a1 }, + {0x11143 ,0x5a1 }, + {0x12043 ,0x5a1 }, + {0x12143 ,0x5a1 }, + {0x13043 ,0x5a1 }, + {0x13143 ,0x5a1 }, + + {0x1200b2 ,0xdc }, + {0x110043 ,0x5a1 }, + {0x110143 ,0x5a1 }, + {0x111043 ,0x5a1 }, + {0x111143 ,0x5a1 }, + {0x112043 ,0x5a1 }, + {0x112143 ,0x5a1 }, + {0x113043 ,0x5a1 }, + {0x113143 ,0x5a1 }, + + {0x2200b2 ,0xdc }, + {0x210043 ,0x5a1 }, + {0x210143 ,0x5a1 }, + {0x211043 ,0x5a1 }, + {0x211143 ,0x5a1 }, + {0x212043 ,0x5a1 }, + {0x212143 ,0x5a1 }, + {0x213043 ,0x5a1 }, + {0x213143 ,0x5a1 }, + + {0x200fa ,0x1 }, + {0x1200fa ,0x1 }, + {0x2200fa ,0x1 }, + + {0x20019 ,0x1 }, + {0x120019 ,0x1 }, + {0x220019 ,0x1 }, + + {0x200f0 ,0x660 }, + {0x200f1 ,0x0 }, + {0x200f2 ,0x4444 }, + {0x200f3 ,0x8888 }, + {0x200f4 ,0x5665 }, + {0x200f5 ,0x0 }, + {0x200f6 ,0x0 }, + {0x200f7 ,0xf000 }, +
board/freescale/imx8mm_evk/lpddr4_timing.c line 319
Quoted 10 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +10
-0+ { 0x20025, 0x0 }, + { 0x2002d, LPDDR4_PHY_DMIPinPresent }, + { 0x12002d, LPDDR4_PHY_DMIPinPresent }, + { 0x22002d, LPDDR4_PHY_DMIPinPresent }, + { 0x200c7, 0x21 }, + { 0x200ca, 0x24 }, + { 0x1200c7, 0x21 }, + { 0x1200ca, 0x24 }, + { 0x2200c7, 0x21 }, + { 0x2200ca, 0x24 },
Why do you add tuple - offset and value? Shouldn't we have the DDR training functions here?
It is possible to train IMX6Q and Vybrid's DDR3 (as fair as I know). Would it be also possible to add the DDR4 training code for IMX8?
Quoted 714 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +714
-0+}; + +/* ddr phy trained csr */ +struct dram_cfg_param lpddr4_ddrphy_trained_csr[] = { + {0x200b2 ,0x0 }, + {0x1200b2 ,0x0 }, + {0x2200b2 ,0x0 }, + {0x200cb ,0x0 }, + {0x10043 ,0x0 }, + {0x110043 ,0x0 }, + {0x210043 ,0x0 }, + {0x10143 ,0x0 }, + {0x110143 ,0x0 }, + {0x210143 ,0x0 }, + {0x11043 ,0x0 }, + {0x111043 ,0x0 }, + {0x211043 ,0x0 }, + {0x11143 ,0x0 }, + {0x111143 ,0x0 }, + {0x211143 ,0x0 }, + {0x12043 ,0x0 }, + {0x112043 ,0x0 }, + {0x212043 ,0x0 }, + {0x12143 ,0x0 }, + {0x112143 ,0x0 }, + {0x212143 ,0x0 }, + {0x13043 ,0x0 }, + {0x113043 ,0x0 }, + {0x213043 ,0x0 }, + {0x13143 ,0x0 }, + {0x113143 ,0x0 }, + {0x213143 ,0x0 }, + {0x80 ,0x0 }, + {0x100080 ,0x0 }, + {0x200080 ,0x0 }, + {0x1080 ,0x0 }, + {0x101080 ,0x0 }, + {0x201080 ,0x0 }, + {0x2080 ,0x0 }, + {0x102080 ,0x0 }, + {0x202080 ,0x0 }, + {0x3080 ,0x0 }, + {0x103080 ,0x0 }, + {0x203080 ,0x0 }, + {0x4080 ,0x0 }, + {0x104080 ,0x0 }, + {0x204080 ,0x0 }, + {0x5080 ,0x0 }, + {0x105080 ,0x0 }, + {0x205080 ,0x0 }, + {0x6080 ,0x0 }, + {0x106080 ,0x0 }, + {0x206080 ,0x0 }, + {0x7080 ,0x0 }, + {0x107080 ,0x0 }, + {0x207080 ,0x0 }, + {0x8080 ,0x0 }, + {0x108080 ,0x0 }, + {0x208080 ,0x0 }, + {0x9080 ,0x0 }, + {0x109080 ,0x0 }, + {0x209080 ,0x0 }, + {0x10080 ,0x0 }, + {0x110080 ,0x0 }, + {0x210080 ,0x0 }, + {0x10180 ,0x0 }, + {0x110180 ,0x0 }, + {0x210180 ,0x0 }, + {0x11080 ,0x0 }, + {0x111080 ,0x0 }, + {0x211080 ,0x0 }, + {0x11180 ,0x0 }, + {0x111180 ,0x0 }, + {0x211180 ,0x0 }, + {0x12080 ,0x0 }, + {0x112080 ,0x0 }, + {0x212080 ,0x0 }, + {0x12180 ,0x0 }, + {0x112180 ,0x0 }, + {0x212180 ,0x0 }, + {0x13080 ,0x0 }, + {0x113080 ,0x0 }, + {0x213080 ,0x0 }, + {0x13180 ,0x0 }, + {0x113180 ,0x0 }, + {0x213180 ,0x0 }, + {0x10081 ,0x0 }, + {0x110081 ,0x0 }, + {0x210081 ,0x0 }, + {0x10181 ,0x0 }, + {0x110181 ,0x0 }, + {0x210181 ,0x0 }, + {0x11081 ,0x0 }, + {0x111081 ,0x0 }, + {0x211081 ,0x0 }, + {0x11181 ,0x0 }, + {0x111181 ,0x0 }, + {0x211181 ,0x0 }, + {0x12081 ,0x0 }, + {0x112081 ,0x0 }, + {0x212081 ,0x0 }, + {0x12181 ,0x0 }, + {0x112181 ,0x0 }, + {0x212181 ,0x0 }, + {0x13081 ,0x0 }, + {0x113081 ,0x0 }, + {0x213081 ,0x0 }, + {0x13181 ,0x0 }, + {0x113181 ,0x0 }, + {0x213181 ,0x0 }, + {0x100d0 ,0x0 }, + {0x1100d0 ,0x0 }, + {0x2100d0 ,0x0 }, + {0x101d0 ,0x0 }, + {0x1101d0 ,0x0 }, + {0x2101d0 ,0x0 }, + {0x110d0 ,0x0 }, + {0x1110d0 ,0x0 }, + {0x2110d0 ,0x0 }, + {0x111d0 ,0x0 }, + {0x1111d0 ,0x0 }, + {0x2111d0 ,0x0 }, + {0x120d0 ,0x0 }, + {0x1120d0 ,0x0 }, + {0x2120d0 ,0x0 }, + {0x121d0 ,0x0 }, + {0x1121d0 ,0x0 }, + {0x2121d0 ,0x0 }, + {0x130d0 ,0x0 }, + {0x1130d0 ,0x0 }, + {0x2130d0 ,0x0 }, + {0x131d0 ,0x0 }, + {0x1131d0 ,0x0 }, + {0x2131d0 ,0x0 }, + {0x100d1 ,0x0 }, + {0x1100d1 ,0x0 }, + {0x2100d1 ,0x0 }, + {0x101d1 ,0x0 }, + {0x1101d1 ,0x0 }, + {0x2101d1 ,0x0 }, + {0x110d1 ,0x0 }, + {0x1110d1 ,0x0 }, + {0x2110d1 ,0x0 }, + {0x111d1 ,0x0 }, + {0x1111d1 ,0x0 }, + {0x2111d1 ,0x0 }, + {0x120d1 ,0x0 }, + {0x1120d1 ,0x0 }, + {0x2120d1 ,0x0 }, + {0x121d1 ,0x0 }, + {0x1121d1 ,0x0 }, + {0x2121d1 ,0x0 }, + {0x130d1 ,0x0 }, + {0x1130d1 ,0x0 }, + {0x2130d1 ,0x0 }, + {0x131d1 ,0x0 }, + {0x1131d1 ,0x0 }, + {0x2131d1 ,0x0 }, + {0x10068 ,0x0 }, + {0x10168 ,0x0 }, + {0x10268 ,0x0 }, + {0x10368 ,0x0 }, + {0x10468 ,0x0 }, + {0x10568 ,0x0 }, + {0x10668 ,0x0 }, + {0x10768 ,0x0 }, + {0x10868 ,0x0 }, + {0x11068 ,0x0 }, + {0x11168 ,0x0 }, + {0x11268 ,0x0 }, + {0x11368 ,0x0 }, + {0x11468 ,0x0 }, + {0x11568 ,0x0 }, + {0x11668 ,0x0 }, + {0x11768 ,0x0 }, + {0x11868 ,0x0 }, + {0x12068 ,0x0 }, + {0x12168 ,0x0 }, + {0x12268 ,0x0 }, + {0x12368 ,0x0 }, + {0x12468 ,0x0 }, + {0x12568 ,0x0 }, + {0x12668 ,0x0 }, + {0x12768 ,0x0 }, + {0x12868 ,0x0 }, + {0x13068 ,0x0 }, + {0x13168 ,0x0 }, + {0x13268 ,0x0 }, + {0x13368 ,0x0 }, + {0x13468 ,0x0 }, + {0x13568 ,0x0 }, + {0x13668 ,0x0 }, + {0x13768 ,0x0 }, + {0x13868 ,0x0 }, + {0x10069 ,0x0 }, + {0x10169 ,0x0 }, + {0x10269 ,0x0 }, + {0x10369 ,0x0 }, + {0x10469 ,0x0 }, + {0x10569 ,0x0 }, + {0x10669 ,0x0 }, + {0x10769 ,0x0 }, + {0x10869 ,0x0 }, + {0x11069 ,0x0 }, + {0x11169 ,0x0 }, + {0x11269 ,0x0 }, + {0x11369 ,0x0 }, + {0x11469 ,0x0 }, + {0x11569 ,0x0 }, + {0x11669 ,0x0 }, + {0x11769 ,0x0 }, + {0x11869 ,0x0 }, + {0x12069 ,0x0 }, + {0x12169 ,0x0 }, + {0x12269 ,0x0 }, + {0x12369 ,0x0 }, + {0x12469 ,0x0 }, + {0x12569 ,0x0 }, + {0x12669 ,0x0 }, + {0x12769 ,0x0 }, + {0x12869 ,0x0 }, + {0x13069 ,0x0 }, + {0x13169 ,0x0 }, + {0x13269 ,0x0 }, + {0x13369 ,0x0 }, + {0x13469 ,0x0 }, + {0x13569 ,0x0 }, + {0x13669 ,0x0 }, + {0x13769 ,0x0 }, + {0x13869 ,0x0 }, + {0x1008c ,0x0 }, + {0x11008c ,0x0 }, + {0x21008c ,0x0 }, + {0x1018c ,0x0 }, + {0x11018c ,0x0 }, + {0x21018c ,0x0 }, + {0x1108c ,0x0 }, + {0x11108c ,0x0 }, + {0x21108c ,0x0 }, + {0x1118c ,0x0 }, + {0x11118c ,0x0 }, + {0x21118c ,0x0 }, + {0x1208c ,0x0 }, + {0x11208c ,0x0 }, + {0x21208c ,0x0 }, + {0x1218c ,0x0 }, + {0x11218c ,0x0 }, + {0x21218c ,0x0 }, + {0x1308c ,0x0 }, + {0x11308c ,0x0 }, + {0x21308c ,0x0 }, + {0x1318c ,0x0 }, + {0x11318c ,0x0 }, + {0x21318c ,0x0 }, + {0x1008d ,0x0 }, + {0x11008d ,0x0 }, + {0x21008d ,0x0 }, + {0x1018d ,0x0 }, + {0x11018d ,0x0 }, + {0x21018d ,0x0 }, + {0x1108d ,0x0 }, + {0x11108d ,0x0 }, + {0x21108d ,0x0 }, + {0x1118d ,0x0 }, + {0x11118d ,0x0 }, + {0x21118d ,0x0 }, + {0x1208d ,0x0 }, + {0x11208d ,0x0 }, + {0x21208d ,0x0 }, + {0x1218d ,0x0 }, + {0x11218d ,0x0 }, + {0x21218d ,0x0 }, + {0x1308d ,0x0 }, + {0x11308d ,0x0 }, + {0x21308d ,0x0 }, + {0x1318d ,0x0 }, + {0x11318d ,0x0 }, + {0x21318d ,0x0 }, + {0x100c0 ,0x0 }, + {0x1100c0 ,0x0 }, + {0x2100c0 ,0x0 }, + {0x101c0 ,0x0 }, + {0x1101c0 ,0x0 }, + {0x2101c0 ,0x0 }, + {0x102c0 ,0x0 }, + {0x1102c0 ,0x0 }, + {0x2102c0 ,0x0 }, + {0x103c0 ,0x0 }, + {0x1103c0 ,0x0 }, + {0x2103c0 ,0x0 }, + {0x104c0 ,0x0 }, + {0x1104c0 ,0x0 }, + {0x2104c0 ,0x0 }, + {0x105c0 ,0x0 }, + {0x1105c0 ,0x0 }, + {0x2105c0 ,0x0 }, + {0x106c0 ,0x0 }, + {0x1106c0 ,0x0 }, + {0x2106c0 ,0x0 }, + {0x107c0 ,0x0 }, + {0x1107c0 ,0x0 }, + {0x2107c0 ,0x0 }, + {0x108c0 ,0x0 }, + {0x1108c0 ,0x0 }, + {0x2108c0 ,0x0 }, + {0x110c0 ,0x0 }, + {0x1110c0 ,0x0 }, + {0x2110c0 ,0x0 }, + {0x111c0 ,0x0 }, + {0x1111c0 ,0x0 }, + {0x2111c0 ,0x0 }, + {0x112c0 ,0x0 }, + {0x1112c0 ,0x0 }, + {0x2112c0 ,0x0 }, + {0x113c0 ,0x0 }, + {0x1113c0 ,0x0 }, + {0x2113c0 ,0x0 }, + {0x114c0 ,0x0 }, + {0x1114c0 ,0x0 }, + {0x2114c0 ,0x0 }, + {0x115c0 ,0x0 }, + {0x1115c0 ,0x0 }, + {0x2115c0 ,0x0 }, + {0x116c0 ,0x0 }, + {0x1116c0 ,0x0 }, + {0x2116c0 ,0x0 }, + {0x117c0 ,0x0 }, + {0x1117c0 ,0x0 }, + {0x2117c0 ,0x0 }, + {0x118c0 ,0x0 }, + {0x1118c0 ,0x0 }, + {0x2118c0 ,0x0 }, + {0x120c0 ,0x0 }, + {0x1120c0 ,0x0 }, + {0x2120c0 ,0x0 }, + {0x121c0 ,0x0 }, + {0x1121c0 ,0x0 }, + {0x2121c0 ,0x0 }, + {0x122c0 ,0x0 }, + {0x1122c0 ,0x0 }, + {0x2122c0 ,0x0 }, + {0x123c0 ,0x0 }, + {0x1123c0 ,0x0 }, + {0x2123c0 ,0x0 }, + {0x124c0 ,0x0 }, + {0x1124c0 ,0x0 }, + {0x2124c0 ,0x0 }, + {0x125c0 ,0x0 }, + {0x1125c0 ,0x0 }, + {0x2125c0 ,0x0 }, + {0x126c0 ,0x0 }, + {0x1126c0 ,0x0 }, + {0x2126c0 ,0x0 }, + {0x127c0 ,0x0 }, + {0x1127c0 ,0x0 }, + {0x2127c0 ,0x0 }, + {0x128c0 ,0x0 }, + {0x1128c0 ,0x0 }, + {0x2128c0 ,0x0 }, + {0x130c0 ,0x0 }, + {0x1130c0 ,0x0 }, + {0x2130c0 ,0x0 }, + {0x131c0 ,0x0 }, + {0x1131c0 ,0x0 }, + {0x2131c0 ,0x0 }, + {0x132c0 ,0x0 }, + {0x1132c0 ,0x0 }, + {0x2132c0 ,0x0 }, + {0x133c0 ,0x0 }, + {0x1133c0 ,0x0 }, + {0x2133c0 ,0x0 }, + {0x134c0 ,0x0 }, + {0x1134c0 ,0x0 }, + {0x2134c0 ,0x0 }, + {0x135c0 ,0x0 }, + {0x1135c0 ,0x0 }, + {0x2135c0 ,0x0 }, + {0x136c0 ,0x0 }, + {0x1136c0 ,0x0 }, + {0x2136c0 ,0x0 }, + {0x137c0 ,0x0 }, + {0x1137c0 ,0x0 }, + {0x2137c0 ,0x0 }, + {0x138c0 ,0x0 }, + {0x1138c0 ,0x0 }, + {0x2138c0 ,0x0 }, + {0x100c1 ,0x0 }, + {0x1100c1 ,0x0 }, + {0x2100c1 ,0x0 }, + {0x101c1 ,0x0 }, + {0x1101c1 ,0x0 }, + {0x2101c1 ,0x0 }, + {0x102c1 ,0x0 }, + {0x1102c1 ,0x0 }, + {0x2102c1 ,0x0 }, + {0x103c1 ,0x0 }, + {0x1103c1 ,0x0 }, + {0x2103c1 ,0x0 }, + {0x104c1 ,0x0 }, + {0x1104c1 ,0x0 }, + {0x2104c1 ,0x0 }, + {0x105c1 ,0x0 }, + {0x1105c1 ,0x0 }, + {0x2105c1 ,0x0 }, + {0x106c1 ,0x0 }, + {0x1106c1 ,0x0 }, + {0x2106c1 ,0x0 }, + {0x107c1 ,0x0 }, + {0x1107c1 ,0x0 }, + {0x2107c1 ,0x0 }, + {0x108c1 ,0x0 }, + {0x1108c1 ,0x0 }, + {0x2108c1 ,0x0 }, + {0x110c1 ,0x0 }, + {0x1110c1 ,0x0 }, + {0x2110c1 ,0x0 }, + {0x111c1 ,0x0 }, + {0x1111c1 ,0x0 }, + {0x2111c1 ,0x0 }, + {0x112c1 ,0x0 }, + {0x1112c1 ,0x0 }, + {0x2112c1 ,0x0 }, + {0x113c1 ,0x0 }, + {0x1113c1 ,0x0 }, + {0x2113c1 ,0x0 }, + {0x114c1 ,0x0 }, + {0x1114c1 ,0x0 }, + {0x2114c1 ,0x0 }, + {0x115c1 ,0x0 }, + {0x1115c1 ,0x0 }, + {0x2115c1 ,0x0 }, + {0x116c1 ,0x0 }, + {0x1116c1 ,0x0 }, + {0x2116c1 ,0x0 }, + {0x117c1 ,0x0 }, + {0x1117c1 ,0x0 }, + {0x2117c1 ,0x0 }, + {0x118c1 ,0x0 }, + {0x1118c1 ,0x0 }, + {0x2118c1 ,0x0 }, + {0x120c1 ,0x0 }, + {0x1120c1 ,0x0 }, + {0x2120c1 ,0x0 }, + {0x121c1 ,0x0 }, + {0x1121c1 ,0x0 }, + {0x2121c1 ,0x0 }, + {0x122c1 ,0x0 }, + {0x1122c1 ,0x0 }, + {0x2122c1 ,0x0 }, + {0x123c1 ,0x0 }, + {0x1123c1 ,0x0 }, + {0x2123c1 ,0x0 }, + {0x124c1 ,0x0 }, + {0x1124c1 ,0x0 }, + {0x2124c1 ,0x0 }, + {0x125c1 ,0x0 }, + {0x1125c1 ,0x0 }, + {0x2125c1 ,0x0 }, + {0x126c1 ,0x0 }, + {0x1126c1 ,0x0 }, + {0x2126c1 ,0x0 }, + {0x127c1 ,0x0 }, + {0x1127c1 ,0x0 }, + {0x2127c1 ,0x0 }, + {0x128c1 ,0x0 }, + {0x1128c1 ,0x0 }, + {0x2128c1 ,0x0 }, + {0x130c1 ,0x0 }, + {0x1130c1 ,0x0 }, + {0x2130c1 ,0x0 }, + {0x131c1 ,0x0 }, + {0x1131c1 ,0x0 }, + {0x2131c1 ,0x0 }, + {0x132c1 ,0x0 }, + {0x1132c1 ,0x0 }, + {0x2132c1 ,0x0 }, + {0x133c1 ,0x0 }, + {0x1133c1 ,0x0 }, + {0x2133c1 ,0x0 }, + {0x134c1 ,0x0 }, + {0x1134c1 ,0x0 }, + {0x2134c1 ,0x0 }, + {0x135c1 ,0x0 }, + {0x1135c1 ,0x0 }, + {0x2135c1 ,0x0 }, + {0x136c1 ,0x0 }, + {0x1136c1 ,0x0 }, + {0x2136c1 ,0x0 }, + {0x137c1 ,0x0 }, + {0x1137c1 ,0x0 }, + {0x2137c1 ,0x0 }, + {0x138c1 ,0x0 }, + {0x1138c1 ,0x0 }, + {0x2138c1 ,0x0 }, + {0x10020 ,0x0 }, + {0x110020 ,0x0 }, + {0x210020 ,0x0 }, + {0x11020 ,0x0 }, + {0x111020 ,0x0 }, + {0x211020 ,0x0 }, + {0x12020 ,0x0 }, + {0x112020 ,0x0 }, + {0x212020 ,0x0 }, + {0x13020 ,0x0 }, + {0x113020 ,0x0 }, + {0x213020 ,0x0 }, + {0x20072 ,0x0 }, + {0x20073 ,0x0 }, + {0x20074 ,0x0 }, + {0x100aa ,0x0 }, + {0x110aa ,0x0 }, + {0x120aa ,0x0 }, + {0x130aa ,0x0 }, + {0x20010 ,0x0 }, + {0x120010 ,0x0 }, + {0x220010 ,0x0 }, + {0x20011 ,0x0 }, + {0x120011 ,0x0 }, + {0x220011 ,0x0 }, + {0x100ae ,0x0 }, + {0x1100ae ,0x0 }, + {0x2100ae ,0x0 }, + {0x100af ,0x0 }, + {0x1100af ,0x0 }, + {0x2100af ,0x0 }, + {0x110ae ,0x0 }, + {0x1110ae ,0x0 }, + {0x2110ae ,0x0 }, + {0x110af ,0x0 }, + {0x1110af ,0x0 }, + {0x2110af ,0x0 }, + {0x120ae ,0x0 }, + {0x1120ae ,0x0 }, + {0x2120ae ,0x0 }, + {0x120af ,0x0 }, + {0x1120af ,0x0 }, + {0x2120af ,0x0 }, + {0x130ae ,0x0 }, + {0x1130ae ,0x0 }, + {0x2130ae ,0x0 }, + {0x130af ,0x0 }, + {0x1130af ,0x0 }, + {0x2130af ,0x0 }, + {0x20020 ,0x0 }, + {0x120020 ,0x0 }, + {0x220020 ,0x0 }, + {0x100a0 ,0x0 }, + {0x100a1 ,0x0 }, + {0x100a2 ,0x0 }, + {0x100a3 ,0x0 }, + {0x100a4 ,0x0 }, + {0x100a5 ,0x0 }, + {0x100a6 ,0x0 }, + {0x100a7 ,0x0 }, + {0x110a0 ,0x0 }, + {0x110a1 ,0x0 }, + {0x110a2 ,0x0 }, + {0x110a3 ,0x0 }, + {0x110a4 ,0x0 }, + {0x110a5 ,0x0 }, + {0x110a6 ,0x0 }, + {0x110a7 ,0x0 }, + {0x120a0 ,0x0 }, + {0x120a1 ,0x0 }, + {0x120a2 ,0x0 }, + {0x120a3 ,0x0 }, + {0x120a4 ,0x0 }, + {0x120a5 ,0x0 }, + {0x120a6 ,0x0 }, + {0x120a7 ,0x0 }, + {0x130a0 ,0x0 }, + {0x130a1 ,0x0 }, + {0x130a2 ,0x0 }, + {0x130a3 ,0x0 }, + {0x130a4 ,0x0 }, + {0x130a5 ,0x0 }, + {0x130a6 ,0x0 }, + {0x130a7 ,0x0 }, + {0x2007c ,0x0 }, + {0x12007c ,0x0 }, + {0x22007c ,0x0 }, + {0x2007d ,0x0 }, + {0x12007d ,0x0 }, + {0x22007d ,0x0 }, + {0x400fd ,0x0 }, + {0x400c0 ,0x0 }, + {0x90201 ,0x0 }, + {0x190201 ,0x0 }, + {0x290201 ,0x0 }, + {0x90202 ,0x0 }, + {0x190202 ,0x0 }, + {0x290202 ,0x0 }, + {0x90203 ,0x0 }, + {0x190203 ,0x0 }, + {0x290203 ,0x0 }, + {0x90204 ,0x0 }, + {0x190204 ,0x0 }, + {0x290204 ,0x0 }, + {0x90205 ,0x0 }, + {0x190205 ,0x0 }, + {0x290205 ,0x0 }, + {0x90206 ,0x0 }, + {0x190206 ,0x0 }, + {0x290206 ,0x0 }, + {0x90207 ,0x0 }, + {0x190207 ,0x0 }, + {0x290207 ,0x0 }, + {0x90208 ,0x0 }, + {0x190208 ,0x0 }, + {0x290208 ,0x0 }, + {0x10062 ,0x0 }, + {0x10162 ,0x0 }, + {0x10262 ,0x0 }, + {0x10362 ,0x0 }, + {0x10462 ,0x0 }, + {0x10562 ,0x0 }, + {0x10662 ,0x0 }, + {0x10762 ,0x0 }, + {0x10862 ,0x0 }, + {0x11062 ,0x0 }, + {0x11162 ,0x0 }, + {0x11262 ,0x0 }, + {0x11362 ,0x0 }, + {0x11462 ,0x0 }, + {0x11562 ,0x0 }, + {0x11662 ,0x0 }, + {0x11762 ,0x0 }, + {0x11862 ,0x0 }, + {0x12062 ,0x0 }, + {0x12162 ,0x0 }, + {0x12262 ,0x0 }, + {0x12362 ,0x0 }, + {0x12462 ,0x0 }, + {0x12562 ,0x0 }, + {0x12662 ,0x0 }, + {0x12762 ,0x0 }, + {0x12862 ,0x0 }, + {0x13062 ,0x0 }, + {0x13162 ,0x0 }, + {0x13262 ,0x0 }, + {0x13362 ,0x0 }, + {0x13462 ,0x0 }, + {0x13562 ,0x0 }, + {0x13662 ,0x0 }, + {0x13762 ,0x0 }, + {0x13862 ,0x0 }, + {0x20077 ,0x0 }, + {0x10001 ,0x0 }, + {0x11001 ,0x0 }, + {0x12001 ,0x0 }, + {0x13001 ,0x0 }, + {0x10040 ,0x0 }, + {0x10140 ,0x0 }, + {0x10240 ,0x0 }, + {0x10340 ,0x0 }, + {0x10440 ,0x0 }, + {0x10540 ,0x0 }, + {0x10640 ,0x0 }, + {0x10740 ,0x0 }, + {0x10840 ,0x0 }, + {0x10030 ,0x0 }, + {0x10130 ,0x0 }, + {0x10230 ,0x0 }, + {0x10330 ,0x0 }, + {0x10430 ,0x0 }, + {0x10530 ,0x0 }, + {0x10630 ,0x0 }, + {0x10730 ,0x0 }, + {0x10830 ,0x0 }, + {0x11040 ,0x0 }, + {0x11140 ,0x0 }, + {0x11240 ,0x0 }, + {0x11340 ,0x0 }, + {0x11440 ,0x0 }, + {0x11540 ,0x0 }, + {0x11640 ,0x0 }, + {0x11740 ,0x0 }, + {0x11840 ,0x0 }, + {0x11030 ,0x0 }, + {0x11130 ,0x0 }, + {0x11230 ,0x0 }, + {0x11330 ,0x0 }, + {0x11430 ,0x0 }, + {0x11530 ,0x0 }, + {0x11630 ,0x0 }, + {0x11730 ,0x0 }, + {0x11830 ,0x0 }, + {0x12040 ,0x0 }, + {0x12140 ,0x0 }, + {0x12240 ,0x0 }, + {0x12340 ,0x0 }, + {0x12440 ,0x0 }, + {0x12540 ,0x0 }, + {0x12640 ,0x0 }, + {0x12740 ,0x0 }, + {0x12840 ,0x0 }, + {0x12030 ,0x0 }, + {0x12130 ,0x0 }, + {0x12230 ,0x0 }, + {0x12330 ,0x0 }, + {0x12430 ,0x0 }, + {0x12530 ,0x0 }, + {0x12630 ,0x0 }, + {0x12730 ,0x0 }, + {0x12830 ,0x0 }, + {0x13040 ,0x0 }, + {0x13140 ,0x0 }, + {0x13240 ,0x0 }, + {0x13340 ,0x0 }, + {0x13440 ,0x0 }, + {0x13540 ,0x0 }, + {0x13640 ,0x0 }, + {0x13740 ,0x0 }, + {0x13840 ,0x0 },
board/freescale/imx8mm_evk/lpddr4_timing.c line 1043
Quoted 10 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +10
-0+ { 0x13030, 0x0 }, + { 0x13130, 0x0 }, + { 0x13230, 0x0 }, + { 0x13330, 0x0 }, + { 0x13430, 0x0 }, + { 0x13530, 0x0 }, + { 0x13630, 0x0 }, + { 0x13730, 0x0 }, + { 0x13830, 0x0 }, +};
The same as above. Please look into imx6q DDR3 training code.
Quoted 886 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +10
-0+ +/* P0 message block paremeter for training firmware */ +struct dram_cfg_param lpddr4_fsp0_cfg[] = { + {0xd0000 ,0x0 }, + {0x54000 ,0x0 }, + {0x54001 ,0x0 }, + {0x54002 ,0x0 }, + {0x54003 ,0xbb8 }, + {0x54004 ,0x2 }, + {0x54005 , ((LPDDR4_PHY_RON <<8 ) |LPDDR4_PHY_RTT ) },//PHY Ron/Rtt
board/freescale/imx8mm_evk/lpddr4_timing.c new file +75
-0+ { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x131f }, + { 0x54009, 0xc8 }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, 0x0 }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x0 }, + { 0x54010, 0x0 }, + { 0x54011, 0x0 }, + { 0x54012, (LPDDR4_CS << 8) | (0x110 & 0xff) }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x2dd4 }, + { 0x5401a, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x5401b, 0x4d66 }, + { 0x5401c, 0x4d08 }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0/*0x16*/ }, + { 0x5401f, 0x2dd4 }, + { 0x54020, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x54021, 0x4d66 }, + { 0x54022, 0x4d08 }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1/*0x16*/ }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, LPDDR4_CS }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0xd400 }, + { 0x54033, (LPDDR4_MR3 << 8) | (0x312d & 0xff) }, + { 0x54034, 0x6600 }, + { 0x54035, 0x84d }, + { 0x54036, 0x4d }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x1600*/ }, + { 0x54038, 0xd400 }, + { 0x54039, (LPDDR4_MR3 << 8) | (0x312d & 0xff) }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x84d }, + { 0x5403c, 0x4d }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x1600*/ }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* P1 message block paremeter for training firmware */ +struct dram_cfg_param lpddr4_fsp1_cfg[] = { + {0xd0000 ,0x0 }, + {0x54000 ,0x0 }, + {0x54001 ,0x0 }, + {0x54002 ,0x101 }, + {0x54003 ,0x190 }, + {0x54004 ,0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) },//PHYRon/Rtt
board/freescale/imx8mm_evk/lpddr4_timing.c new file +75
-0+ { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x121f }, + { 0x54009, 0xc8 }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, 0x0 }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x0 }, + { 0x54010, 0x0 }, + { 0x54011, 0x0 }, + { 0x54012, (LPDDR4_CS << 8) | (0x110 & 0xff) }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x84 }, + { 0x5401a, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x5401b, 0x4d66 }, + { 0x5401c, 0x4d08 }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0/*0x16*/ }, + { 0x5401f, 0x84 }, + { 0x54020, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x54021, 0x4d66 }, + { 0x54022, 0x4d08 }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1/*0x16*/ }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, LPDDR4_CS }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0x8400 }, + { 0x54033, (LPDDR4_MR3 << 8) | (0x3100 & 0xff) }, + { 0x54034, 0x6600 }, + { 0x54035, 0x84d }, + { 0x54036, 0x4d }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x1600*/ }, + { 0x54038, 0x8400 }, + { 0x54039, (LPDDR4_MR3 << 8) | (0x3100 & 0xff) }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x84d }, + { 0x5403c, 0x4d }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x1600*/ }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* P1 message block paremeter for training firmware */ +struct dram_cfg_param lpddr4_fsp2_cfg[] = { + {0xd0000 ,0x0 }, + {0x54000 ,0x0 }, + {0x54001 ,0x0 }, + {0x54002 ,0x102 }, + {0x54003 ,0x64 }, + {0x54004 ,0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) },//PHYRon/Rtt
board/freescale/imx8mm_evk/lpddr4_timing.c new file +75
-0+ { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x121f }, + { 0x54009, 0xc8 }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, 0x0 }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x0 }, + { 0x54010, 0x0 }, + { 0x54011, 0x0 }, + { 0x54012, (LPDDR4_CS << 8) | (0x110 & 0xff) }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x84 }, + { 0x5401a, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x5401b, 0x4d66 }, + { 0x5401c, 0x4d08 }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0/*0x16*/ }, + { 0x5401f, 0x84 }, + { 0x54020, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x54021, 0x4d66 }, + { 0x54022, 0x4d08 }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1/*0x16*/ }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, LPDDR4_CS }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0x8400 }, + { 0x54033, (LPDDR4_MR3 << 8) | (0x3100 & 0xff) }, + { 0x54034, 0x6600 }, + { 0x54035, 0x84d }, + { 0x54036, 0x4d }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x1600*/ }, + { 0x54038, 0x8400 }, + { 0x54039, (LPDDR4_MR3 << 8) | (0x3100 & 0xff) }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x84d }, + { 0x5403c, 0x4d }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x1600*/ }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* P0 2D message block paremeter for training firmware */ +struct dram_cfg_param lpddr4_fsp0_2d_cfg[] = { + {0xd0000 ,0x0 }, + {0x54000 ,0x0 }, + {0x54001 ,0x0 }, + {0x54002 ,0x0 }, + {0x54003 ,0xbb8 }, + {0x54004 ,0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) },//PHYRon/Rtt
board/freescale/imx8mm_evk/lpddr4_timing.c new file +647
-0+ { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x61 }, + { 0x54009, 0xc8 }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, 0x0 }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x100 }, + { 0x54010, 0x1f7f }, + { 0x54011, 0x0 }, + { 0x54012, (LPDDR4_CS << 8) | (0x110 & 0xff) }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x2dd4 }, + { 0x5401a, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x5401b, 0x4d66 }, + { 0x5401c, 0x4d08 }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0/*0x16*/ }, + { 0x5401f, 0x2dd4 }, + { 0x54020, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x54021, 0x4d66 }, + { 0x54022, 0x4d08 }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1/*0x16*/ }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, LPDDR4_CS }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0xd400 }, + { 0x54033, (LPDDR4_MR3 << 8) | (0x312d & 0xff) }, + { 0x54034, 0x6600 }, + { 0x54035, 0x84d }, + { 0x54036, 0x4d }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x1600*/ }, + { 0x54038, 0xd400 }, + { 0x54039, (LPDDR4_MR3 << 8) | (0x312d & 0xff) }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x84d }, + { 0x5403c, 0x4d }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x1600*/ }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* DRAM PHY init engine image */ +struct dram_cfg_param lpddr4_phy_pie[] = { + {0xd0000 ,0x0 }, + {0x90000 ,0x10 }, + {0x90001 ,0x400 }, + {0x90002 ,0x10e }, + {0x90003 ,0x0 }, + {0x90004 ,0x0 }, + {0x90005 ,0x8 }, + {0x90029 ,0xb }, + {0x9002a ,0x480 }, + {0x9002b ,0x109 }, + {0x9002c ,0x8 }, + {0x9002d ,0x448 }, + {0x9002e ,0x139 }, + {0x9002f ,0x8 }, + {0x90030 ,0x478 }, + {0x90031 ,0x109 }, + {0x90032 ,0x0 }, + {0x90033 ,0xe8 }, + {0x90034 ,0x109 }, + {0x90035 ,0x2 }, + {0x90036 ,0x10 }, + {0x90037 ,0x139 }, + {0x90038 ,0xf }, + {0x90039 ,0x7c0 }, + {0x9003a ,0x139 }, + {0x9003b ,0x44 }, + {0x9003c ,0x630 }, + {0x9003d ,0x159 }, + {0x9003e ,0x14f }, + {0x9003f ,0x630 }, + {0x90040 ,0x159 }, + {0x90041 ,0x47 }, + {0x90042 ,0x630 }, + {0x90043 ,0x149 }, + {0x90044 ,0x4f }, + {0x90045 ,0x630 }, + {0x90046 ,0x179 }, + {0x90047 ,0x8 }, + {0x90048 ,0xe0 }, + {0x90049 ,0x109 }, + {0x9004a ,0x0 }, + {0x9004b ,0x7c8 }, + {0x9004c ,0x109 }, + {0x9004d ,0x0 }, + {0x9004e ,0x1 }, + {0x9004f ,0x8 }, + {0x90050 ,0x0 }, + {0x90051 ,0x45a }, + {0x90052 ,0x9 }, + {0x90053 ,0x0 }, + {0x90054 ,0x448 }, + {0x90055 ,0x109 }, + {0x90056 ,0x40 }, + {0x90057 ,0x630 }, + {0x90058 ,0x179 }, + {0x90059 ,0x1 }, + {0x9005a ,0x618 }, + {0x9005b ,0x109 }, + {0x9005c ,0x40c0 }, + {0x9005d ,0x630 }, + {0x9005e ,0x149 }, + {0x9005f ,0x8 }, + {0x90060 ,0x4 }, + {0x90061 ,0x48 }, + {0x90062 ,0x4040 }, + {0x90063 ,0x630 }, + {0x90064 ,0x149 }, + {0x90065 ,0x0 }, + {0x90066 ,0x4 }, + {0x90067 ,0x48 }, + {0x90068 ,0x40 }, + {0x90069 ,0x630 }, + {0x9006a ,0x149 }, + {0x9006b ,0x10 }, + {0x9006c ,0x4 }, + {0x9006d ,0x18 }, + {0x9006e ,0x0 }, + {0x9006f ,0x4 }, + {0x90070 ,0x78 }, + {0x90071 ,0x549 }, + {0x90072 ,0x630 }, + {0x90073 ,0x159 }, + {0x90074 ,0xd49 }, + {0x90075 ,0x630 }, + {0x90076 ,0x159 }, + {0x90077 ,0x94a }, + {0x90078 ,0x630 }, + {0x90079 ,0x159 }, + {0x9007a ,0x441 }, + {0x9007b ,0x630 }, + {0x9007c ,0x149 }, + {0x9007d ,0x42 }, + {0x9007e ,0x630 }, + {0x9007f ,0x149 }, + {0x90080 ,0x1 }, + {0x90081 ,0x630 }, + {0x90082 ,0x149 }, + {0x90083 ,0x0 }, + {0x90084 ,0xe0 }, + {0x90085 ,0x109 }, + {0x90086 ,0xa }, + {0x90087 ,0x10 }, + {0x90088 ,0x109 }, + {0x90089 ,0x9 }, + {0x9008a ,0x3c0 }, + {0x9008b ,0x149 }, + {0x9008c ,0x9 }, + {0x9008d ,0x3c0 }, + {0x9008e ,0x159 }, + {0x9008f ,0x18 }, + {0x90090 ,0x10 }, + {0x90091 ,0x109 }, + {0x90092 ,0x0 }, + {0x90093 ,0x3c0 }, + {0x90094 ,0x109 }, + {0x90095 ,0x18 }, + {0x90096 ,0x4 }, + {0x90097 ,0x48 }, + {0x90098 ,0x18 }, + {0x90099 ,0x4 }, + {0x9009a ,0x58 }, + {0x9009b ,0xa }, + {0x9009c ,0x10 }, + {0x9009d ,0x109 }, + {0x9009e ,0x2 }, + {0x9009f ,0x10 }, + {0x900a0 ,0x109 }, + {0x900a1 ,0x5 }, + {0x900a2 ,0x7c0 }, + {0x900a3 ,0x109 }, + {0x900a4 ,0x10 }, + {0x900a5 ,0x10 }, + {0x900a6 ,0x109 }, + {0x40000 ,0x811 }, + {0x40020 ,0x880 }, + {0x40040 ,0x0 }, + {0x40060 ,0x0 }, + {0x40001 ,0x4008 }, + {0x40021 ,0x83 }, + {0x40041 ,0x4f }, + {0x40061 ,0x0 }, + {0x40002 ,0x4040 }, + {0x40022 ,0x83 }, + {0x40042 ,0x51 }, + {0x40062 ,0x0 }, + {0x40003 ,0x811 }, + {0x40023 ,0x880 }, + {0x40043 ,0x0 }, + {0x40063 ,0x0 }, + {0x40004 ,0x720 }, + {0x40024 ,0xf }, + {0x40044 ,0x1740 }, + {0x40064 ,0x0 }, + {0x40005 ,0x16 }, + {0x40025 ,0x83 }, + {0x40045 ,0x4b }, + {0x40065 ,0x0 }, + {0x40006 ,0x716 }, + {0x40026 ,0xf }, + {0x40046 ,0x2001 }, + {0x40066 ,0x0 }, + {0x40007 ,0x716 }, + {0x40027 ,0xf }, + {0x40047 ,0x2800 }, + {0x40067 ,0x0 }, + {0x40008 ,0x716 }, + {0x40028 ,0xf }, + {0x40048 ,0xf00 }, + {0x40068 ,0x0 }, + {0x40009 ,0x720 }, + {0x40029 ,0xf }, + {0x40049 ,0x1400 }, + {0x40069 ,0x0 }, + {0x4000a ,0xe08 }, + {0x4002a ,0xc15 }, + {0x4004a ,0x0 }, + {0x4006a ,0x0 }, + {0x4000b ,0x623 }, + {0x4002b ,0x15 }, + {0x4004b ,0x0 }, + {0x4006b ,0x0 }, + {0x4000c ,0x4028 }, + {0x4002c ,0x80 }, + {0x4004c ,0x0 }, + {0x4006c ,0x0 }, + {0x4000d ,0xe08 }, + {0x4002d ,0xc1a }, + {0x4004d ,0x0 }, + {0x4006d ,0x0 }, + {0x4000e ,0x623 }, + {0x4002e ,0x1a }, + {0x4004e ,0x0 }, + {0x4006e ,0x0 }, + {0x4000f ,0x4040 }, + {0x4002f ,0x80 }, + {0x4004f ,0x0 }, + {0x4006f ,0x0 }, + {0x40010 ,0x2604 }, + {0x40030 ,0x15 }, + {0x40050 ,0x0 }, + {0x40070 ,0x0 }, + {0x40011 ,0x708 }, + {0x40031 ,0x5 }, + {0x40051 ,0x0 }, + {0x40071 ,0x2002 }, + {0x40012 ,0x8 }, + {0x40032 ,0x80 }, + {0x40052 ,0x0 }, + {0x40072 ,0x0 }, + {0x40013 ,0x2604 }, + {0x40033 ,0x1a }, + {0x40053 ,0x0 }, + {0x40073 ,0x0 }, + {0x40014 ,0x708 }, + {0x40034 ,0xa }, + {0x40054 ,0x0 }, + {0x40074 ,0x2002 }, + {0x40015 ,0x4040 }, + {0x40035 ,0x80 }, + {0x40055 ,0x0 }, + {0x40075 ,0x0 }, + {0x40016 ,0x60a }, + {0x40036 ,0x15 }, + {0x40056 ,0x1200 }, + {0x40076 ,0x0 }, + {0x40017 ,0x61a }, + {0x40037 ,0x15 }, + {0x40057 ,0x1300 }, + {0x40077 ,0x0 }, + {0x40018 ,0x60a }, + {0x40038 ,0x1a }, + {0x40058 ,0x1200 }, + {0x40078 ,0x0 }, + {0x40019 ,0x642 }, + {0x40039 ,0x1a }, + {0x40059 ,0x1300 }, + {0x40079 ,0x0 }, + {0x4001a ,0x4808 }, + {0x4003a ,0x880 }, + {0x4005a ,0x0 }, + {0x4007a ,0x0 }, + {0x900a7 ,0x0 }, + {0x900a8 ,0x790 }, + {0x900a9 ,0x11a }, + {0x900aa ,0x8 }, + {0x900ab ,0x7aa }, + {0x900ac ,0x2a }, + {0x900ad ,0x10 }, + {0x900ae ,0x7b2 }, + {0x900af ,0x2a }, + {0x900b0 ,0x0 }, + {0x900b1 ,0x7c8 }, + {0x900b2 ,0x109 }, + {0x900b3 ,0x10 }, + {0x900b4 ,0x2a8 }, + {0x900b5 ,0x129 }, + {0x900b6 ,0x8 }, + {0x900b7 ,0x370 }, + {0x900b8 ,0x129 }, + {0x900b9 ,0xa }, + {0x900ba ,0x3c8 }, + {0x900bb ,0x1a9 }, + {0x900bc ,0xc }, + {0x900bd ,0x408 }, + {0x900be ,0x199 }, + {0x900bf ,0x14 }, + {0x900c0 ,0x790 }, + {0x900c1 ,0x11a }, + {0x900c2 ,0x8 }, + {0x900c3 ,0x4 }, + {0x900c4 ,0x18 }, + {0x900c5 ,0xe }, + {0x900c6 ,0x408 }, + {0x900c7 ,0x199 }, + {0x900c8 ,0x8 }, + {0x900c9 ,0x8568 }, + {0x900ca ,0x108 }, + {0x900cb ,0x18 }, + {0x900cc ,0x790 }, + {0x900cd ,0x16a }, + {0x900ce ,0x8 }, + {0x900cf ,0x1d8 }, + {0x900d0 ,0x169 }, + {0x900d1 ,0x10 }, + {0x900d2 ,0x8558 }, + {0x900d3 ,0x168 }, + {0x900d4 ,0x70 }, + {0x900d5 ,0x788 }, + {0x900d6 ,0x16a }, + {0x900d7 ,0x1ff8 }, + {0x900d8 ,0x85a8 }, + {0x900d9 ,0x1e8 }, + {0x900da ,0x50 }, + {0x900db ,0x798 }, + {0x900dc ,0x16a }, + {0x900dd ,0x60 }, + {0x900de ,0x7a0 }, + {0x900df ,0x16a }, + {0x900e0 ,0x8 }, + {0x900e1 ,0x8310 }, + {0x900e2 ,0x168 }, + {0x900e3 ,0x8 }, + {0x900e4 ,0xa310 }, + {0x900e5 ,0x168 }, + {0x900e6 ,0xa }, + {0x900e7 ,0x408 }, + {0x900e8 ,0x169 }, + {0x900e9 ,0x6e }, + {0x900ea ,0x0 }, + {0x900eb ,0x68 }, + {0x900ec ,0x0 }, + {0x900ed ,0x408 }, + {0x900ee ,0x169 }, + {0x900ef ,0x0 }, + {0x900f0 ,0x8310 }, + {0x900f1 ,0x168 }, + {0x900f2 ,0x0 }, + {0x900f3 ,0xa310 }, + {0x900f4 ,0x168 }, + {0x900f5 ,0x1ff8 }, + {0x900f6 ,0x85a8 }, + {0x900f7 ,0x1e8 }, + {0x900f8 ,0x68 }, + {0x900f9 ,0x798 }, + {0x900fa ,0x16a }, + {0x900fb ,0x78 }, + {0x900fc ,0x7a0 }, + {0x900fd ,0x16a }, + {0x900fe ,0x68 }, + {0x900ff ,0x790 }, + {0x90100 ,0x16a }, + {0x90101 ,0x8 }, + {0x90102 ,0x8b10 }, + {0x90103 ,0x168 }, + {0x90104 ,0x8 }, + {0x90105 ,0xab10 }, + {0x90106 ,0x168 }, + {0x90107 ,0xa }, + {0x90108 ,0x408 }, + {0x90109 ,0x169 }, + {0x9010a ,0x58 }, + {0x9010b ,0x0 }, + {0x9010c ,0x68 }, + {0x9010d ,0x0 }, + {0x9010e ,0x408 }, + {0x9010f ,0x169 }, + {0x90110 ,0x0 }, + {0x90111 ,0x8b10 }, + {0x90112 ,0x168 }, + {0x90113 ,0x0 }, + {0x90114 ,0xab10 }, + {0x90115 ,0x168 }, + {0x90116 ,0x0 }, + {0x90117 ,0x1d8 }, + {0x90118 ,0x169 }, + {0x90119 ,0x80 }, + {0x9011a ,0x790 }, + {0x9011b ,0x16a }, + {0x9011c ,0x18 }, + {0x9011d ,0x7aa }, + {0x9011e ,0x6a }, + {0x9011f ,0xa }, + {0x90120 ,0x0 }, + {0x90121 ,0x1e9 }, + {0x90122 ,0x8 }, + {0x90123 ,0x8080 }, + {0x90124 ,0x108 }, + {0x90125 ,0xf }, + {0x90126 ,0x408 }, + {0x90127 ,0x169 }, + {0x90128 ,0xc }, + {0x90129 ,0x0 }, + {0x9012a ,0x68 }, + {0x9012b ,0x9 }, + {0x9012c ,0x0 }, + {0x9012d ,0x1a9 }, + {0x9012e ,0x0 }, + {0x9012f ,0x408 }, + {0x90130 ,0x169 }, + {0x90131 ,0x0 }, + {0x90132 ,0x8080 }, + {0x90133 ,0x108 }, + {0x90134 ,0x8 }, + {0x90135 ,0x7aa }, + {0x90136 ,0x6a }, + {0x90137 ,0x0 }, + {0x90138 ,0x8568 }, + {0x90139 ,0x108 }, + {0x9013a ,0xb7 }, + {0x9013b ,0x790 }, + {0x9013c ,0x16a }, + {0x9013d ,0x1f }, + {0x9013e ,0x0 }, + {0x9013f ,0x68 }, + {0x90140 ,0x8 }, + {0x90141 ,0x8558 }, + {0x90142 ,0x168 }, + {0x90143 ,0xf }, + {0x90144 ,0x408 }, + {0x90145 ,0x169 }, + {0x90146 ,0xc }, + {0x90147 ,0x0 }, + {0x90148 ,0x68 }, + {0x90149 ,0x0 }, + {0x9014a ,0x408 }, + {0x9014b ,0x169 }, + {0x9014c ,0x0 }, + {0x9014d ,0x8558 }, + {0x9014e ,0x168 }, + {0x9014f ,0x8 }, + {0x90150 ,0x3c8 }, + {0x90151 ,0x1a9 }, + {0x90152 ,0x3 }, + {0x90153 ,0x370 }, + {0x90154 ,0x129 }, + {0x90155 ,0x20 }, + {0x90156 ,0x2aa }, + {0x90157 ,0x9 }, + {0x90158 ,0x0 }, + {0x90159 ,0x400 }, + {0x9015a ,0x10e }, + {0x9015b ,0x8 }, + {0x9015c ,0xe8 }, + {0x9015d ,0x109 }, + {0x9015e ,0x0 }, + {0x9015f ,0x8140 }, + {0x90160 ,0x10c }, + {0x90161 ,0x10 }, + {0x90162 ,0x8138 }, + {0x90163 ,0x10c }, + {0x90164 ,0x8 }, + {0x90165 ,0x7c8 }, + {0x90166 ,0x101 }, + {0x90167 ,0x8 }, + {0x90168 ,0x0 }, + {0x90169 ,0x8 }, + {0x9016a ,0x8 }, + {0x9016b ,0x448 }, + {0x9016c ,0x109 }, + {0x9016d ,0xf }, + {0x9016e ,0x7c0 }, + {0x9016f ,0x109 }, + {0x90170 ,0x0 }, + {0x90171 ,0xe8 }, + {0x90172 ,0x109 }, + {0x90173 ,0x47 }, + {0x90174 ,0x630 }, + {0x90175 ,0x109 }, + {0x90176 ,0x8 }, + {0x90177 ,0x618 }, + {0x90178 ,0x109 }, + {0x90179 ,0x8 }, + {0x9017a ,0xe0 }, + {0x9017b ,0x109 }, + {0x9017c ,0x0 }, + {0x9017d ,0x7c8 }, + {0x9017e ,0x109 }, + {0x9017f ,0x8 }, + {0x90180 ,0x8140 }, + {0x90181 ,0x10c }, + {0x90182 ,0x0 }, + {0x90183 ,0x1 }, + {0x90184 ,0x8 }, + {0x90185 ,0x8 }, + {0x90186 ,0x4 }, + {0x90187 ,0x8 }, + {0x90188 ,0x8 }, + {0x90189 ,0x7c8 }, + {0x9018a ,0x101 }, + {0x90006 ,0x0 }, + {0x90007 ,0x0 }, + {0x90008 ,0x8 }, + {0x90009 ,0x0 }, + {0x9000a ,0x0 }, + {0x9000b ,0x0 }, + {0xd00e7 ,0x400 }, + {0x90017 ,0x0 }, + {0x9001f ,0x2a }, + {0x90026 ,0x6a }, + {0x400d0 ,0x0 }, + {0x400d1 ,0x101 }, + {0x400d2 ,0x105 }, + {0x400d3 ,0x107 }, + {0x400d4 ,0x10f }, + {0x400d5 ,0x202 }, + {0x400d6 ,0x20a }, + {0x400d7 ,0x20b }, + {0x2003a ,0x2 }, + {0x2000b ,0x5d }, + {0x2000c ,0xbb }, + {0x2000d ,0x753 }, + {0x2000e ,0x2c }, + {0x12000b ,0xc }, + {0x12000c ,0x19 }, + {0x12000d ,0xfa }, + {0x12000e ,0x10 }, + {0x22000b ,0x3 }, + {0x22000c ,0x6 }, + {0x22000d ,0x3e }, + {0x22000e ,0x10 }, + {0x9000c ,0x0 }, + {0x9000d ,0x173 }, + {0x9000e ,0x60 }, + {0x9000f ,0x6110 }, + {0x90010 ,0x2152 }, + {0x90011 ,0xdfbd }, + {0x90012 ,0x60 }, + {0x90013 ,0x6152 }, + {0x20010 ,0x5a }, + {0x20011 ,0x3 }, + {0x40080 ,0xe0 }, + {0x40081 ,0x12 }, + {0x40082 ,0xe0 }, + {0x40083 ,0x12 }, + {0x40084 ,0xe0 }, + {0x40085 ,0x12 }, + {0x140080 ,0xe0 }, + {0x140081 ,0x12 }, + {0x140082 ,0xe0 }, + {0x140083 ,0x12 }, + {0x140084 ,0xe0 }, + {0x140085 ,0x12 }, + {0x240080 ,0xe0 }, + {0x240081 ,0x12 }, + {0x240082 ,0xe0 }, + {0x240083 ,0x12 }, + {0x240084 ,0xe0 }, + {0x240085 ,0x12 }, + {0x400fd ,0xf }, + {0x10011 ,0x1 }, + {0x10012 ,0x1 }, + {0x10013 ,0x180 }, + {0x10018 ,0x1 }, + {0x10002 ,0x6209 }, + {0x100b2 ,0x1 }, + {0x101b4 ,0x1 }, + {0x102b4 ,0x1 }, + {0x103b4 ,0x1 }, + {0x104b4 ,0x1 }, + {0x105b4 ,0x1 }, + {0x106b4 ,0x1 }, + {0x107b4 ,0x1 }, + {0x108b4 ,0x1 }, + {0x11011 ,0x1 }, + {0x11012 ,0x1 }, + {0x11013 ,0x180 }, + {0x11018 ,0x1 }, + {0x11002 ,0x6209 }, + {0x110b2 ,0x1 }, + {0x111b4 ,0x1 }, + {0x112b4 ,0x1 }, + {0x113b4 ,0x1 }, + {0x114b4 ,0x1 }, + {0x115b4 ,0x1 }, + {0x116b4 ,0x1 }, + {0x117b4 ,0x1 }, + {0x118b4 ,0x1 }, + {0x12011 ,0x1 }, + {0x12012 ,0x1 }, + {0x12013 ,0x180 }, + {0x12018 ,0x1 }, + {0x12002 ,0x6209 }, + {0x120b2 ,0x1 }, + {0x121b4 ,0x1 }, + {0x122b4 ,0x1 }, + {0x123b4 ,0x1 }, + {0x124b4 ,0x1 }, + {0x125b4 ,0x1 }, + {0x126b4 ,0x1 }, + {0x127b4 ,0x1 }, + {0x128b4 ,0x1 }, + {0x13011 ,0x1 }, + {0x13012 ,0x1 }, + {0x13013 ,0x180 }, + {0x13018 ,0x1 }, + {0x13002 ,0x6209 }, + {0x130b2 ,0x1 }, + {0x131b4 ,0x1 }, + { 0x132b4, 0x1 },
board/freescale/imx8mm_evk/lpddr4_timing.c line 1935
Quoted 10 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +10
-0+ { 0x133b4, 0x1 }, + { 0x134b4, 0x1 }, + { 0x135b4, 0x1 }, + { 0x136b4, 0x1 }, + { 0x137b4, 0x1 }, + { 0x138b4, 0x1 }, + { 0x2003a, 0x2 }, + { 0xc0080, 0x2 }, + { 0xd0000, 0x1 }, +};
The same as above.
Quoted 43 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +42
-0+ +struct dram_fsp_msg lpddr4_dram_fsp_msg[] = { + { +/* P0 3000mts 1D */ + .drate =3000 , + .fw_type =FW_1D_IMAGE , + .fsp_cfg = lpddr4_fsp0_cfg, + .fsp_cfg_num =ARRAY_SIZE (lpddr4_fsp0_cfg), + }, + { +/* P0 3000mts 2D */ + .drate =3000 , + .fw_type =FW_2D_IMAGE , + .fsp_cfg = lpddr4_fsp0_2d_cfg, + .fsp_cfg_num =ARRAY_SIZE (lpddr4_fsp0_2d_cfg), + }, + { +/* P1 400mts 1D */ + .drate =400 , + .fw_type =FW_1D_IMAGE , + .fsp_cfg = lpddr4_fsp1_cfg, + .fsp_cfg_num =ARRAY_SIZE (lpddr4_fsp1_cfg), + }, + { +/* P1 100mts 1D */ + .drate =100 , + .fw_type =FW_1D_IMAGE , + .fsp_cfg = lpddr4_fsp2_cfg, + .fsp_cfg_num =ARRAY_SIZE (lpddr4_fsp2_cfg), + }, +}; + +/* lpddr4 timing config params on EVK board */ +struct dram_timing_info dram_timing = { + .ddrc_cfg = lpddr4_ddrc_cfg, + .ddrc_cfg_num =ARRAY_SIZE (lpddr4_ddrc_cfg), + .ddrphy_cfg = lpddr4_ddrphy_cfg, + .ddrphy_cfg_num =ARRAY_SIZE (lpddr4_ddrphy_cfg), + .fsp_msg = lpddr4_dram_fsp_msg, + .fsp_msg_num =ARRAY_SIZE (lpddr4_dram_fsp_msg), + .ddrphy_trained_csr = lpddr4_ddrphy_trained_csr, + .ddrphy_trained_csr_num =
ARRAY_SIZE(lpddr4_ddrphy_trained_csr),
board/freescale/imx8mm_evk/lpddr4_timing.c line 1979
Quoted 2 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +2
-0+ .ddrphy_pie = lpddr4_phy_pie, + .ddrphy_pie_num = ARRAY_SIZE(lpddr4_phy_pie),
It would be best to get the above values calculated dynamically for this SoC.
Quoted 124 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +1
-0+};(quoted diff) +0
-0
b/board/freescale/imx8mm_evk/spl.cnew file mode 100644 index 0000000000..cf1dfc2c2aboard/freescale/imx8mm_evk/spl.c new file +37
-0@@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2019 NXP +*/ + +#include <common.h> +#include <spl.h> +#include <asm/io.h> +#include <errno.h> +#include <asm/io.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm/arch/imx8mm_pins.h> +#include <asm/arch/sys_proto.h> +#include <power/pmic.h> +#include <asm/arch/clock.h> +#include <asm/mach-imx/gpio.h> +#include <asm/mach-imx/mxc_i2c.h> +#include <fsl_esdhc.h> +#include <mmc.h> +#include <asm/arch/ddr.h> + +DECLARE_GLOBAL_DATA_PTR ; + +void spl_dram_init (void ) +{ +ddr_init (&dram_timing); +} + +#define USDHC2_CD_GPIO IMX_GPIO_NR(2, 18) +#define USDHC2_PWR_GPIO IMX_GPIO_NR(2, 19) + +#define USDHC_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE | \ + PAD_CTL_PE | PAD_CTL_FSEL2) +#define USDHC_GPIO_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE1) + +static iomux_v3_cfg_t const usdhc3_pads[] = { + IMX8MM_PAD_NAND_WE_B_USDHC3_CLK |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_WP_B_USDHC3_CMD |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_DATA04_USDHC3_DATA0 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_DATA05_USDHC3_DATA1 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_DATA06_USDHC3_DATA2 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_DATA07_USDHC3_DATA3 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_RE_B_USDHC3_DATA4 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_CE2_B_USDHC3_DATA5 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_CE3_B_USDHC3_DATA6 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_CLE_USDHC3_DATA7 |
MUX_PAD_CTRL(USDHC_PAD_CTRL), +};board/freescale/imx8mm_evk/spl.c new file +5
-0+ +static iomux_v3_cfg_t const usdhc2_pads[] = { +IMX8MM_PAD_SD2_CLK_USDHC2_CLK |MUX_PAD_CTRL (USDHC_PAD_CTRL ), +IMX8MM_PAD_SD2_CMD_USDHC2_CMD |MUX_PAD_CTRL (USDHC_PAD_CTRL ), + IMX8MM_PAD_SD2_DATA0_USDHC2_DATA0 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_SD2_DATA1_USDHC2_DATA1 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_SD2_DATA2_USDHC2_DATA2 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_SD2_DATA3_USDHC2_DATA3 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_SD2_RESET_B_GPIO2_IO19 |
MUX_PAD_CTRL(USDHC_GPIO_PAD_CTRL), +};board/freescale/imx8mm_evk/spl.c new file +7
-0+ +/* +* The evk board uses DAT3 to detect CD card plugin, +* in u-boot we mux the pin to GPIO when doing board_mmc_getcd. +*/ +static iomux_v3_cfg_t const usdhc2_cd_pad = + IMX8MM_PAD_SD2_DATA3_GPIO2_IO18 |
MUX_PAD_CTRL(USDHC_GPIO_PAD_CTRL); +board/freescale/imx8mm_evk/spl.c new file +14
-0+static iomux_v3_cfg_t const usdhc2_dat3_pad = +IMX8MM_PAD_SD2_DATA3_USDHC2_DATA3 | +MUX_PAD_CTRL (USDHC_PAD_CTRL ); + +static struct fsl_esdhc_cfg usdhc_cfg[2 ] = { + {USDHC2_BASE_ADDR ,0 ,1 }, + {USDHC3_BASE_ADDR ,0 ,1 }, +}; + +int board_mmc_init (bd_t *bis) +{ +int i, ret; +/* +* According to the board_mmc_init() the following map is done:
board/freescale/imx8mm_evk/spl.c new file +8
-0+* (U-Boot device node) (Physical Port) +* mmc0 USDHC1 +* mmc1 USDHC2 +*/ +for (i =0 ; i <CONFIG_SYS_FSL_USDHC_NUM ; i++) { +switch (i) { +case 0 : + usdhc_cfg[0].sdhc_clk =
mxc_get_clock(MXC_ESDHC2_CLK);board/freescale/imx8mm_evk/spl.c new file +2
-0+ imx_iomux_v3_setup_multiple_pads(usdhc2_pads, +
ARRAY_SIZE(usdhc2_pads));board/freescale/imx8mm_evk/spl.c new file +1
-0+ gpio_request(USDHC2_PWR_GPIO,"
usdhc2_reset");board/freescale/imx8mm_evk/spl.c new file +6
-0+gpio_direction_output (USDHC2_PWR_GPIO ,0 ); +udelay (500 ); +gpio_direction_output (USDHC2_PWR_GPIO ,1 ); +break ; +case 1 : + usdhc_cfg[1].sdhc_clk =
mxc_get_clock(MXC_ESDHC3_CLK);board/freescale/imx8mm_evk/spl.c new file +2
-0+ imx_iomux_v3_setup_multiple_pads(usdhc3_pads, +
ARRAY_SIZE(usdhc3_pads));
board/freescale/imx8mm_evk/spl.c
Quoted 1 line
board/freescale/imx8mm_evk/spl.c new file +1
-0+break ;
It would be best if you could enable DM/DTS in SPL too from the outset (and share the SPL size).
Do you have any timeline for converting SPL to DM/DTS?
configs/imx8mm_evk_defconfig
Quoted 130 lines
board/freescale/imx8mm_evk/spl.c new file +2
-0+default : + printf("USDHC controllers %d not supported\n", i + 1);
board/freescale/imx8mm_evk/spl.c new file +14
-0+return -EINVAL ; + } + + ret =fsl_esdhc_initialize (bis, &usdhc_cfg[i]); +if (ret) +return ret; + } + +return 0 ; +} + +int board_mmc_getcd (struct mmc *mmc) +{Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
*)mmc->priv;
board/freescale/imx8mm_evk/spl.c new file +72
-0Lines of this file are not shown. View the raw message.
(quoted diff) +0
-0The rest of this diff is not shown. View the raw message.
b/configs/imx8mm_evk_defconfig new file mode 100644 index 0000000000..6110f23e38
configs/imx8mm_evk_defconfig new file +34
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Here you enable the DM_ETH, but the welcome u-boot info says:
"Net: No ethernet found."
include/configs/imx8mm_evk.h
Quoted 59 lines
configs/imx8mm_evk_defconfig new file +7
-0Lines of this file are not shown. View the raw message.
(quoted diff) +0
-0The rest of this diff is not shown. View the raw message.
b/include/configs/imx8mm_evk.hnew file mode 100644 index 0000000000..f944308757include/configs/imx8mm_evk.h new file +22
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
512) +
include/configs/imx8mm_evk.h new file +6
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
CONFIG_SPL_LDSCRIPT"arch/arm/cpu/armv8/u-boot-spl.lds"
+#defineCONFIG_SPL_STACK0x91fff0+#defineCONFIG_SPL_LIBCOMMON_SUPPORT+#defineCONFIG_SPL_LIBGENERIC_SUPPORTinclude/configs/imx8mm_evk.h new file +8
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
used before
GD_FLG_FULL_MALLOC_INITset */ +
+#defineCONFIG_SPL_ABORT_ON_RAW_IMAGE/* For RAW image gives a error info not panic */ +include/configs/imx8mm_evk.h new file +3
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Why do you need to undef those config options?
include/configs/imx8mm_evk.h
Quoted 20 lines
include/configs/imx8mm_evk.h new file +20
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
There seems to be some issue with inheritance, as you need to undef those values manually.
Why is it needed?
include/configs/imx8mm_evk.h
Quoted 159 lines
include/configs/imx8mm_evk.h new file +27
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
earlycon=ec_imx6q,0x30890000,115200\0" \
include/configs/imx8mm_evk.h new file +11
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
root=${mmcroot}\0 " \
include/configs/imx8mm_evk.h new file +1
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
${script};\0" \
include/configs/imx8mm_evk.h new file +3
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
${image}\0" \
include/configs/imx8mm_evk.h new file +1
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
${fdt_file}\0" \
include/configs/imx8mm_evk.h new file +3
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
try; then " \
include/configs/imx8mm_evk.h new file +20
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
try; then " \
include/configs/imx8mm_evk.h new file +1
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
" \
include/configs/imx8mm_evk.h new file +39
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
USDHC2 */ +
include/configs/imx8mm_evk.h new file +6
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
*/ +
include/configs/imx8mm_evk.h new file +2
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
(
PHYS_SDRAM_SIZE>> 1)) +include/configs/imx8mm_evk.h new file +13
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
16) +
include/configs/imx8mm_evk.h new file +20
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Some of those values are (SYS_I2C_*, MXC_OCOTP, FSL_*) are already supported by Kconfig. Please use Kconfig instead.
include/configs/imx8mm_evk.h
Quoted 4 lines
include/configs/imx8mm_evk.h new file +4
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190130/fe085707/attachment-0001.sig>
Part of the diff is not shown here. View the raw message.
Peng Fan
reviewerPATCH 20/20 imx: add i.MX8MM EVK board support
Quoted 34 lines
-----Original Message-----
From: Lukasz Majewski [mailto:lukma at denx.de]
Sent: 2019年1月30日 7:19
To: Peng Fan <[email protected]>
Cc: sbabic at denx.de; Fabio Estevam <[email protected]>; dl-uboot-imx <[email protected]>; u-boot at lists.denx.de
Subject: Re: [U-Boot] [PATCH 20/20] imx: add i.MX8MM EVK board supportHi Peng,
Quoted 20 lines
Add i.MX8MM EVK board support.
Add board and SoC dts
Add ddr training code
support SD/MMC/GPIO/PINCTRL/UARTU-Boot SPL 2019.01-00148-g1179cffe66 (Jan 28 2019 - 17:37:34 +0800) Normal Boot
Trying to boot from MMC1U-Boot 2019.01-00148-g1179cffe66 (Jan 28 2019 - 17:37:34 +0800)
CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz Reset cause: POR Model: NXP i.MX8MM EVK board DRAM: 2 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 In: serial Out: serial Err: serialQuoted 1 line
DM
Quoted 2 lines
You set/adjust latter in the code the fec network driver. Why it is not found?
I dropped network support, could add it in V2.
Quoted 2 lines
Could you also share the output of "dm tree" command?
Sure.
Quoted 3 lines
I suppose/guess that this board shall support as much as possible of the DT/DM conversions?
Ok.
Regards,
Peng.
Quoted 3,808 lines
Quoted 1,017 lines
Hit any key to stop autoboot: 2
Signed-off-by Peng Fan <[email protected]>--- arch/arm/dts/fsl-imx8mm-evk.dts | 203 +++ arch/arm/dts/fsl-imx8mm.dtsi | 586 ++++++++ arch/arm/mach-imx/imx8m/Kconfig | 7 + board/freescale/imx8mm_evk/Kconfig | 12 + board/freescale/imx8mm_evk/MAINTAINERS | 6 + board/freescale/imx8mm_evk/Makefile | 12 + board/freescale/imx8mm_evk/imx8mm_evk.c | 144 ++ board/freescale/imx8mm_evk/lpddr4_timing.c | 1980 ++++++++++++++++++++++++++++ board/freescale/imx8mm_evk/spl.c | 187 +++ configs/imx8mm_evk_defconfig | 41 + include/configs/imx8mm_evk.h | 221 ++++ 11 fileschanged, 3399 insertions(+) create mode 100644
arch/arm/dts/fsl-imx8mm-evk.dtscreate mode 100644arch/arm/dts/fsl-imx8mm.dtsicreate mode 100644 board/freescale/imx8mm_evk/Kconfig create mode 100644 board/freescale/imx8mm_evk/MAINTAINERS create mode 100644 board/freescale/imx8mm_evk/Makefile create mode 100644board/freescale/imx8mm_evk/imx8mm_evk.ccreate mode 100644board/freescale/imx8mm_evk/lpddr4_timing.ccreate mode 100644board/freescale/imx8mm_evk/spl.ccreate mode 100644 configs/imx8mm_evk_defconfig create mode 100644include/configs/imx8mm_evk.h(quoted diff) +0
-0
b/arch/arm/dts/fsl-imx8mm-evk.dtsnew file mode 100644 index 0000000000..df409eca47arch/arm/dts/fsl-imx8mm-evk.dts new file +41
-0@@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include "fsl-imx8mm.dtsi" + +/ { + model = "NXP i.MX8MM EVK board"; + compatible = "fsl,imx8mm-evk", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + off-on-delay = <20000>; + enable-active-high; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + + imx8mm-evk { + pinctrl_fec1: fec1grp { + fsl,pins = < +
MX8MM_IOMUXC_ENET_MDC_ENET1_MDC0x3
+MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO0x3
+MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD30x1f
+MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD20x1f
+MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD10x1f
+MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD00x1f
+MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD30x91
+MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD20x91
+MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD10x91
+MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD00x91
+MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC0x1f
+MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC0x91
+MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL0x91
+MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL0x1f
+MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO220x19arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < +
MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO160x19arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < +
MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX0x140
+MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX0x140arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < +
MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO150x1c4
+MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO190x41arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < +
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK0x190
+MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD0x1d0
+MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA00x1d0
+MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA10x1d0
+MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA20x1d0
+MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA30x1d0
+MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT0x1d0arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < +
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK0x194
+MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD0x1d4
+MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA00x1d4
+MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA10x1d4
+MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA20x1d4
+MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA30x1d4
+MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT0x1d0arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < +
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK0x196
+MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD0x1d6
+MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA00x1d6
+MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA10x1d6
+MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA20x1d6
+MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA30x1d6
+MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT0x1d0arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < +
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK0x190
+MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD0x1d0
+MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA00x1d0
+MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA10x1d0
+MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA20x1d0
+MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA30x1d0
+MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA40x1d0
+MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA50x1d0
+MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA60x1d0
+MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA70x1d0
+MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE0x190arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < +
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK0x194
+MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD0x1d4
+MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA00x1d4
+MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA10x1d4
+MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA20x1d4
+MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA30x1d4
+MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA40x1d4
+MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA50x1d4
+MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA60x1d4
+MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA70x1d4
+MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE0x194arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < +
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK0x196
+MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD0x1d6
+MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA00x1d6
+MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA10x1d6
+MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA20x1d6
+MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA30x1d6
+MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA40x1d6
+MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA50x1d6
+MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA60x1d6
+MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA70x1d6
+MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE0x196arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < +
MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B0xc6arch/arm/dts/fsl-imx8mm-evk.dts new file +38
-0+ >; + }; + }; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +};(quoted diff) +0
-0
b/arch/arm/dts/fsl-imx8mm.dtsinew file mode 100644 index 0000000000..8a808f856darch/arm/dts/fsl-imx8mm.dtsi new file +143
-0@@ -0,0 +1,586 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2017-2019 NXP + */ + +#include <dt-bindings/clock/imx8mm-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/pins-imx8mm.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "fsl,imx8mm"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + A53_0: cpu at 0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_1: cpu at 1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_2: cpu at 2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_3: cpu at 3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + memory at 40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc_32k: clock at 0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc_32k"; + }; + + osc_24m: clock at 1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc_24m"; + }; + + clk_ext1: clock at 2 { + compatible = "fixed-clock"; + reg = <3>; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext1"; + }; + + clk_ext2: clock at 3 { + compatible = "fixed-clock"; + reg = <4>; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext2"; + }; + + clk_ext3: clock at 4 { + compatible = "fixed-clock"; + reg = <5>; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext3"; + }; + + clk_ext4: clock at 5 { + compatible = "fixed-clock"; + reg = <6>; + #clock-cells = <0>; + clock-frequency= <133000000>; + clock-output-names = "clk_ext4"; + }; + }; + + gic: interrupt-controller at 38800000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */ + <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base +
SGI_base) */arch/arm/dts/fsl-imx8mm.dtsi new file +14
-0+ #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 + (GIC_CPU_MASK_SIMPLE(6) |
IRQ_TYPE_LEVEL_HIGH)>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>,<
&A53_3>;arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) |
IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) |
IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) |
IRQ_TYPE_LEVEL_LOW)>, /* Virtual */arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) |
IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */arch/arm/dts/fsl-imx8mm.dtsi new file +19
-0+ clock-frequency = <8000000>; + arm,no-tick-in-suspend; + }; + + soc at 0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + aips1: bus at 30000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x30000000 0x0 0x400000>; + ranges; + + gpio1: gpio at 30200000 { + compatible = "fsl,imx8mm-gpio","fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30200000 0x0 0x10000>; + interrupts = <GIC_SPI 64
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 65
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio at 30210000 { + compatible = "fsl,imx8mm-gpio","fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30210000 0x0 0x10000>; + interrupts = <GIC_SPI 66
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 67
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio at 30220000 { + compatible = "fsl,imx8mm-gpio","fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30220000 0x0 0x10000>; + interrupts = <GIC_SPI 68
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 69
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio at 30230000 { + compatible = "fsl,imx8mm-gpio","fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30230000 0x0 0x10000>; + interrupts = <GIC_SPI 70
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 71
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio at 30240000 { + compatible = "fsl,imx8mm-gpio","fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30240000 0x0 0x10000>; + interrupts = <GIC_SPI 72
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 73
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +10
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wdog1: wdog at 30280000 { + compatible = "fsl,imx21-wdt"; + reg = <0 0x30280000 0 0x10000>; + interrupts = <GIC_SPI 78
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_WDOG1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ status = "disabled"; + }; + + wdog2: wdog at 30290000 { + compatible = "fsl,imx21-wdt"; + reg = <0 0x30290000 0 0x10000>; + interrupts = <GIC_SPI 79
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_WDOG2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ status = "disabled"; + }; + + wdog3: wdog at 302a0000 { + compatible = "fsl,imx21-wdt"; + reg = <0 0x302a0000 0 0x10000>; + interrupts = <GIC_SPI 10
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_WDOG3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ status = "disabled"; + }; + + sdma2: dma-controller at 302c0000 { + compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x302c0000 0x0 0x10000>; + interrupts = <GIC_SPI 103
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_SDMA2_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_SDMA2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +3
-0+ clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name ="imx/sdma/sdma-imx7d.bin";
arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ fsl,ratio-1-1; + status = "okay"; + }; + + sdma3: dma-controller at 302b0000 { + compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x302b0000 0x0 0x10000>; + interrupts = <GIC_SPI 34
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_SDMA3_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ <&clk IMX8MM_CLK_SDMA3_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name ="imx/sdma/sdma-imx7d.bin";
arch/arm/dts/fsl-imx8mm.dtsi new file +11
-0+ fsl,ratio-1-1; + status = "okay"; + }; + + iomuxc: pinctrl at 30330000 { + compatible = "fsl,imx8mm-iomuxc"; + reg = <0x0 0x30330000 0x0 0x10000>; + }; + + gpr: iomuxc-gpr at 30340000 { + compatible ="fsl,imx8mm-iomuxc-gpr", "syscon";
arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ reg = <0x0 0x30340000 0x0 0x10000>; + }; + + ocotp: ocotp-ctrl at 30350000 { + compatible = "fsl,imx8mq-ocotp","fsl,imx7d-ocotp", "syscon";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0 0x30350000 0 0x10000>; + clocks = <&clk
IMX8MM_CLK_OCOTP_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ /* For nvmem subnodes */ + #address-cells = <1>; + #size-cells = <1>; + }; + + anatop: anatop at 30360000 { + compatible = "fsl,imx8mm-anatop","syscon", "simple-bus";
arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ reg = <0x0 0x30360000 0x0 0x10000>; + }; + + snvs: snvs at 30370000 { + compatible ="fsl,sec-v4.0-mon","syscon", "simple-mfd";
arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ reg = <0x0 0x30370000 0x0 0x10000>; + + snvs_rtc: snvs-rtc-lp{ + compatible ="fsl,sec-v4.0-mon-rtc-lp";
arch/arm/dts/fsl-imx8mm.dtsi new file +3
-0+ regmap =<&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI 19
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 20
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ }; + + snvs_pwrkey: snvs-powerkey { + compatible ="fsl,sec-v4.0-pwrkey";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ regmap = <&snvs>; + interrupts = <GIC_SPI 4
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +10
-0+ linux,keycode = <KEY_POWER>; + wakeup-source; + }; + }; + + clk: clock-controller at 30380000 { + compatible = "fsl,imx8mm-ccm"; + reg = <0x0 0x30380000 0x0 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>,<
&clk_ext1>, <&clk_ext2>,arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ <&clk_ext3>, <&clk_ext4>; + clock-names = "osc_32k", "osc_24m","
clk_ext1", "clk_ext2",arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ "clk_ext3", "clk_ext4"; + }; + + src: src at 30390000 { + compatible = "fsl,imx8mm-src","syscon";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30390000 0x0 0x10000>; + interrupts = <GIC_SPI 89
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ #reset-cells = <1>; + }; + + gpc: gpc at 303a0000 { + compatible = "fsl,imx8mm-gpc","syscon";
arch/arm/dts/fsl-imx8mm.dtsi new file +3
-0+ reg = <0x0 0x303a0000 0x0 0x10000>; + interrupt-controller; + interrupts = <GIC_SPI 87
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +13
-0+ #interrupt-cells = <3>; + }; + }; + + aips2: bus at 30400000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x30400000 0x0 0x400000>; + ranges; + + pwm1: pwm at 30660000 { + compatible = "fsl,imx8mm-pwm","fsl,imx27-pwm";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30660000 0x0 0x10000>; + interrupts = <GIC_SPI 81
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +9
-0+ clocks = <&clk IMX8MM_CLK_PWM1_ROOT>, + <&clk IMX8MM_CLK_PWM1_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm at 30670000 { + compatible = "fsl,imx8mm-pwm","fsl,imx27-pwm";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30670000 0x0 0x10000>; + interrupts = <GIC_SPI 82
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +9
-0+ clocks = <&clk IMX8MM_CLK_PWM2_ROOT>, + <&clk IMX8MM_CLK_PWM2_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm at 30680000 { + compatible = "fsl,imx8mm-pwm","fsl,imx27-pwm";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30680000 0x0 0x10000>; + interrupts = <GIC_SPI 83
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +9
-0+ clocks = <&clk IMX8MM_CLK_PWM3_ROOT>, + <&clk IMX8MM_CLK_PWM3_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm at 30690000 { + compatible = "fsl,imx8mm-pwm","fsl,imx27-pwm";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30690000 0x0 0x10000>; + interrupts = <GIC_SPI 84
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +19
-0+ clocks = <&clk IMX8MM_CLK_PWM4_ROOT>, + <&clk IMX8MM_CLK_PWM4_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + }; + + aips3: bus at 30800000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x30800000 0x0 0x400000>; + ranges; + + ecspi1: ecspi at 30820000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-ecspi","fsl,imx51-ecspi";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30820000 0x0 0x10000>; + interrupts = <GIC_SPI 31
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_ECSPI1_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_ECSPI1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: ecspi at 30830000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-ecspi","fsl,imx51-ecspi";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30830000 0x0 0x10000>; + interrupts = <GIC_SPI 32
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_ECSPI2_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_ECSPI2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: ecspi at 30840000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-ecspi","fsl,imx51-ecspi";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30840000 0x0 0x10000>; + interrupts = <GIC_SPI 33
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_ECSPI3_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_ECSPI3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial at 30860000 { + compatible = "fsl,imx8mm-uart", + "fsl,imx6q-uart","fsl,imx21-uart";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30860000 0x0 0x10000>; + interrupts = <GIC_SPI 26
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_UART1_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_UART1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial at 30880000 { + compatible = "fsl,imx8mm-uart", + "fsl,imx6q-uart","fsl,imx21-uart";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30880000 0x0 0x10000>; + interrupts = <GIC_SPI 28
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_UART3_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_UART3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial at 30890000 { + compatible = "fsl,imx8mm-uart", + "fsl,imx6q-uart","fsl,imx21-uart";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30890000 0x0 0x10000>; + interrupts = <GIC_SPI 27
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_UART2_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_UART2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c1: i2c at 30a20000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-i2c","fsl,imx21-i2c";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30a20000 0x0 0x10000>; + interrupts = <GIC_SPI 35
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clocks = <&clk IMX8MM_CLK_I2C1_ROOT>; + status = "disabled"; + }; + + i2c2: i2c at 30a30000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-i2c","fsl,imx21-i2c";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30a30000 0x0 0x10000>; + interrupts = <GIC_SPI 36
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clocks = <&clk IMX8MM_CLK_I2C2_ROOT>; + status = "disabled"; + }; + + i2c3: i2c at 30a40000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-i2c","fsl,imx21-i2c";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30a40000 0x0 0x10000>; + interrupts = <GIC_SPI 37
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clocks = <&clk IMX8MM_CLK_I2C3_ROOT>; + status = "disabled"; + }; + + i2c4: i2c at 30a50000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-i2c","fsl,imx21-i2c";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30a50000 0x0 0x10000>; + interrupts = <GIC_SPI 38
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clocks = <&clk IMX8MM_CLK_I2C4_ROOT>; + status = "disabled"; + }; + + uart4: serial at 30a60000 { + compatible = "fsl,imx8mq-uart", + "fsl,imx6q-uart","fsl,imx21-uart";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30a60000 0x0 0x10000>; + interrupts = <GIC_SPI 29
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_UART4_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_UART4_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + usdhc1: mmc at 30b40000 { + compatible = "fsl,imx8mq-usdhc","fsl,imx7d-usdhc";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30b40000 0x0 0x10000>; + interrupts = <GIC_SPI 22
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk
IMX8MM_CLK_NAND_USDHC_BUS>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_USDHC1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&clk
IMX8MM_CLK_USDHC1>;arch/arm/dts/fsl-imx8mm.dtsi new file +9
-0+ assigned-clock-rates = <400000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: mmc at 30b50000 { + compatible = "fsl,imx8mq-usdhc","fsl,imx7d-usdhc";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30b50000 0x0 0x10000>; + interrupts = <GIC_SPI 23
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk
IMX8MM_CLK_NAND_USDHC_BUS>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_USDHC2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +9
-0+ clock-names = "ipg", "ahb", "per"; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: mmc at 30b60000 { + compatible = "fsl,imx8mq-usdhc","fsl,imx7d-usdhc";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0x0 0x30b60000 0x0 0x10000>; + interrupts = <GIC_SPI 24
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk
IMX8MM_CLK_NAND_USDHC_BUS>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_USDHC3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&clk
IMX8MM_CLK_USDHC3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +9
-0+ assigned-clock-rates = <400000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + }; + }; +};(quoted diff) +0
-0Quoted 1 line
b/arch/arm/mach-imx/imx8m/Kconfig index
35c978e863..f520075875100644
arch/arm/mach-imx/imx8m/Kconfig config TARGET_IMX8MQ_EVK · line 31
Quoted 11 lines
arch/arm/mach-imx/imx8m/Kconfig +5
-0@@ -24,8 +24,15 @@ config TARGET_IMX8MQ_EVK select IMX8MQ select IMX8M_LPDDR4 +config TARGET_IMX8MM_EVK + bool "imx8mm LPDDR4 EVK board" + select IMX8MM + select SUPPORT_SPL + select IMX8M_LPDDR4Here you shall put the select DM_{UART,USDHC, etc}
Quoted 89 lines
arch/arm/mach-imx/imx8m/Kconfig +2
-0+ endchoice source "board/freescale/imx8mq_evk/Kconfig" +source "board/freescale/imx8mm_evk/Kconfig" endif(quoted diff) +0
-0b/board/freescale/imx8mm_evk/Kconfig new file mode 100644 index 0000000000..299691a619
board/freescale/imx8mm_evk/Kconfig new file +12
-0@@ -0,0 +1,12 @@ +if TARGET_IMX8MM_EVK + +config SYS_BOARD + default "imx8mm_evk" + +config SYS_VENDOR + default "freescale" + +config SYS_CONFIG_NAME + default "imx8mm_evk" + +endif(quoted diff) +0
-0b/board/freescale/imx8mm_evk/MAINTAINERS new file mode 100644 index 0000000000..b031bb0674
board/freescale/imx8mm_evk/MAINTAINERS new file +6
-0@@ -0,0 +1,6 @@ +i.MX8MM EVK BOARD +M: Peng Fan <[email protected]> +S: Maintained +F: board/freescale/imx8mm_evk/ +F: include/configs/imx8mm_evk.h +F: configs/imx8mm_evk_defconfig(quoted diff) +0
-0b/board/freescale/imx8mm_evk/Makefile new file mode 100644 index 0000000000..1db7b62caf
board/freescale/imx8mm_evk/Makefile new file +12
-0@@ -0,0 +1,12 @@ +# +# Copyright 2018 NXP +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += imx8mm_evk.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o +endif(quoted diff) +0
-0
b/board/freescale/imx8mm_evk/imx8mm_evk.cnew file mode 100644 index 0000000000..a681aca04dboard/freescale/imx8mm_evk/imx8mm_evk.c new file +27
-0@@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2018 NXP +*/ + +#include <common.h> +#include <malloc.h> +#include <errno.h> +#include <asm/io.h> +#include <miiphy.h> +#include <netdev.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm-generic/gpio.h> +#include <fsl_esdhc.h> +#include <mmc.h> +#include <asm/arch/imx8mm_pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-imx/gpio.h> +#include <asm/mach-imx/mxc_i2c.h> +#include <asm/arch/clock.h> +#include <spl.h> +#include <asm/mach-imx/dma.h> + +DECLARE_GLOBAL_DATA_PTR ; + +#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) +#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE |
PAD_CTL_PUE|PAD_CTL_PE) +board/freescale/imx8mm_evk/imx8mm_evk.c
Quoted 2 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +2
-0+static iomux_v3_cfg_t const uart_pads[] = { + IMX8MM_PAD_UART2_RXD_UART2_RX |
MUX_PAD_CTRL(UART_PAD_CTRL),board/freescale/imx8mm_evk/imx8mm_evk.c
Quoted 1 line
board/freescale/imx8mm_evk/imx8mm_evk.c new file +1
-0+ IMX8MM_PAD_UART2_TXD_UART2_TX |
MUX_PAD_CTRL(UART_PAD_CTRL),Quoted 30 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +4
-0+}; + +static iomux_v3_cfg_t const wdog_pads[] = { + IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B |
MUX_PAD_CTRL(WDOG_PAD_CTRL), +};board/freescale/imx8mm_evk/imx8mm_evk.c new file +6
-0+ +int board_early_init_f (void ) +{ +struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR ; + + imx_iomux_v3_setup_multiple_pads(wdog_pads,
ARRAY_SIZE(wdog_pads)); +board/freescale/imx8mm_evk/imx8mm_evk.c new file +3
-0+set_wdog_reset (wdog); + + imx_iomux_v3_setup_multiple_pads(uart_pads,
ARRAY_SIZE(uart_pads)); +board/freescale/imx8mm_evk/imx8mm_evk.c new file +14
-0+return 0 ; +} + +#ifdef CONFIG_BOARD_POSTCLK_INIT +int board_postclk_init (void ) +{ +/* TODO */ +return 0 ; +} +#endif + +int dram_init (void ) +{ +/* rom_pointer[1] contains the size of TEE occupies */ board/freescale/imx8mm_evk/imx8mm_evk.c line 71
Quoted 10 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +10
-0+if (rom_pointer[1 ]) + gd->ram_size =PHYS_SDRAM_SIZE - rom_pointer[1 ]; +else + gd->ram_size =PHYS_SDRAM_SIZE ; + +return 0 ; +} + +#ifdef CONFIG_OF_BOARD_SETUP +int ft_board_setup (void *blob,bd_t *bd)^^^ - fdt_board_setup ?board/freescale/imx8mm_evk/imx8mm_evk.c
Quoted 9 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +9
-0+{ +return 0 ; +} +#endif + +#ifdef CONFIG_FEC_MXC +#define FEC_RST_PAD IMX_GPIO_NR(4, 22) +static iomux_v3_cfg_t const fec1_rst_pads[] = { + IMX8MM_PAD_SAI2_RXC_GPIO4_IO22 |
MUX_PAD_CTRL(NO_PAD_CTRL),This shall be done with
fsl_fec.cDM driver - there is support for adding reset pin (to dts).board/freescale/imx8mm_evk/imx8mm_evk.c line 92
Quoted 12 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +12
-0+}; + +static void setup_iomux_fec (void ) +{ +imx_iomux_v3_setup_multiple_pads (fec1_rst_pads, +ARRAY_SIZE (fec1_rst_pads)); + +gpio_request (FEC_RST_PAD ,"fec1_rst" ); +gpio_direction_output (FEC_RST_PAD ,0 ); +udelay (500 ); +gpio_direction_output (FEC_RST_PAD ,1 ); +}This shall be replaced with DM/DTS of the
fsl_fec.cdriver. Please also note that there are (at least on imx6q) some timing issues when we move the code to DM/DTS (some delay is needed).Quoted 20 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +5
-0+ +static int setup_fec (void ) +{ + struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs + = (struct iomuxc_gpr_base_regs*)IOMUXC_GPR_BASE_ADDR; +
board/freescale/imx8mm_evk/imx8mm_evk.c new file +5
-0+setup_iomux_fec (); + +/* Use 125M anatop REF_CLK1 for ENET1, not from external */ + clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], + IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_SHIFT,0);
board/freescale/imx8mm_evk/imx8mm_evk.c new file +6
-0+return set_clk_enet (ENET_125MHZ ); +} + +int board_phy_config (struct phy_device *phydev) +{ +/* enable rgmii rxc skew and phy mode select to RGMII copper */
board/freescale/imx8mm_evk/imx8mm_evk.c new file +1
-0+phy_write (phydev,MDIO_DEVAD_NONE ,0x1d ,0x1f );board/freescale/imx8mm_evk/imx8mm_evk.c line 120
Quoted 10 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +10
-0+phy_write (phydev,MDIO_DEVAD_NONE ,0x1e ,0x8 ); + +phy_write (phydev,MDIO_DEVAD_NONE ,0x1d ,0x00 ); +phy_write (phydev,MDIO_DEVAD_NONE ,0x1e ,0x82ee ); +phy_write (phydev,MDIO_DEVAD_NONE ,0x1d ,0x05 ); +phy_write (phydev,MDIO_DEVAD_NONE ,0x1e ,0x100 ); + +if (phydev->drv->config) + phydev->drv->config (phydev); +return 0 ;Which PHY do you use? E.g. KSZ... support passing those values via DTS.
Quoted 30 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +24
-0+} +#endif + +int board_init (void ) +{ +#ifdef CONFIG_FEC_MXC +setup_fec (); +#endif +return 0 ; +} + +int board_mmc_get_env_dev (int devno) +{ +return devno -1 ; +} + +int board_late_init (void ) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +env_set ("board_name" ,"EVK" ); +env_set ("board_rev" ,"iMX8MM" ); +#endif +return 0 ; +}(quoted diff) +0
-0
b/board/freescale/imx8mm_evk/lpddr4_timing.cnew file mode 100644 index 0000000000..4bade5bf74board/freescale/imx8mm_evk/lpddr4_timing.c line 3
Quoted 3 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +3
-0@@ -0,0 +1,1980 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2018 NXP Author is missing.
Quoted 306 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +306
-0+*/ + +#include <linux/kernel.h> +#include <common.h> +#include <asm/arch/ddr.h> +#include <asm/arch/lpddr4_define.h> + +struct dram_cfg_param lpddr4_ddrc_cfg[] = { +/* Start to config, default 3200mbps */ + {DDRC_DBG1 (0 ),0x00000001 }, + {DDRC_PWRCTL (0 ),0x00000001 }, + {DDRC_MSTR (0 ),0xa1080020 }, + {DDRC_RFSHTMG (0 ),0x005b00d2 }, + {DDRC_INIT0 (0 ),0xC003061B }, + {DDRC_INIT1 (0 ),0x009D0000 }, + {DDRC_INIT3 (0 ),0x00D4002D }, + {DDRC_INIT4 (0 ), (LPDDR4_MR3 <<16 ) |0x0000 }, + {DDRC_INIT6 (0 ),0x0066004a }, + {DDRC_INIT7 (0 ),0x0006004a }, + + {DDRC_DRAMTMG0 (0 ),0x1A201B22 }, + {DDRC_DRAMTMG1 (0 ),0x00060633 }, + {DDRC_DRAMTMG3 (0 ),0x00C0C000 }, + {DDRC_DRAMTMG4 (0 ),0x0F04080F }, + {DDRC_DRAMTMG5 (0 ),0x02040C0C }, + {DDRC_DRAMTMG6 (0 ),0x01010007 }, + {DDRC_DRAMTMG7 (0 ),0x00000401 }, + {DDRC_DRAMTMG12 (0 ),0x00020600 }, + {DDRC_DRAMTMG13 (0 ),0x0C100002 }, + {DDRC_DRAMTMG14 (0 ),0x000000E6 }, + {DDRC_DRAMTMG17 (0 ),0x00A00050 }, + + {DDRC_ZQCTL0 (0 ),0x03200018 }, + {DDRC_ZQCTL1 (0 ),0x028061A8 }, + {DDRC_ZQCTL2 (0 ),0x00000000 }, + + {DDRC_DFITMG0 (0 ),0x0497820A }, + {DDRC_DFITMG2 (0 ),0x0000170A }, + {DDRC_DRAMTMG2 (0 ),0x070E171a }, + {DDRC_DBICTL (0 ),0x00000001 }, + + {DDRC_DFITMG1 (0 ),0x00080303 }, + {DDRC_DFIUPD0 (0 ),0xE0400018 }, + {DDRC_DFIUPD1 (0 ),0x00DF00E4 }, + {DDRC_DFIUPD2 (0 ),0x80000000 }, + {DDRC_DFIMISC (0 ),0x00000011 }, + + {DDRC_DFIPHYMSTR (0 ),0x00000000 }, + {DDRC_RANKCTL (0 ),0x00000c99 }, + +/* address mapping */ + {DDRC_ADDRMAP0 (0 ),0x0000001f }, + {DDRC_ADDRMAP1 (0 ),0x00080808 }, + {DDRC_ADDRMAP2 (0 ),0x00000000 }, + {DDRC_ADDRMAP3 (0 ),0x00000000 }, + {DDRC_ADDRMAP4 (0 ),0x00001f1f }, + {DDRC_ADDRMAP5 (0 ),0x07070707 }, + {DDRC_ADDRMAP6 (0 ),0x07070707 }, + {DDRC_ADDRMAP7 (0 ),0x00000f0f }, + +/* performance setting */ + {DDRC_SCHED (0 ),0x29001701 }, + {DDRC_SCHED1 (0 ),0x0000002c }, + {DDRC_PERFHPR1 (0 ),0x04000030 }, + {DDRC_PERFLPR1 (0 ),0x900093e7 }, + {DDRC_PERFWR1 (0 ),0x20005574 }, + {DDRC_PCCFG (0 ),0x00000111 }, + {DDRC_PCFGW_0 (0 ),0x000072ff }, + {DDRC_PCFGQOS0_0 (0 ),0x02100e07 }, + {DDRC_PCFGQOS1_0 (0 ),0x00620096 }, + {DDRC_PCFGWQOS0_0 (0 ),0x01100e07 }, + {DDRC_PCFGWQOS1_0 (0 ),0x00c8012c }, + +/* frequency P1&P2 */ +/* Frequency 1: 400mbps */ + {DDRC_FREQ1_DRAMTMG0 (0 ),0x0d0b010c }, + {DDRC_FREQ1_DRAMTMG1 (0 ),0x00030410 }, + {DDRC_FREQ1_DRAMTMG2 (0 ),0x0203090c }, + {DDRC_FREQ1_DRAMTMG3 (0 ),0x00505006 }, + {DDRC_FREQ1_DRAMTMG4 (0 ),0x05040305 }, + {DDRC_FREQ1_DRAMTMG5 (0 ),0x0d0e0504 }, + {DDRC_FREQ1_DRAMTMG6 (0 ),0x0a060004 }, + {DDRC_FREQ1_DRAMTMG7 (0 ),0x0000090e }, + {DDRC_FREQ1_DRAMTMG14 (0 ),0x00000032 }, + {DDRC_FREQ1_DRAMTMG15 (0 ),0x00000000 }, + {DDRC_FREQ1_DRAMTMG17 (0 ),0x0036001b }, + {DDRC_FREQ1_DERATEINT (0 ),0x7e9fbeb1 }, + {DDRC_FREQ1_DFITMG0 (0 ),0x03818200 }, + {DDRC_FREQ1_DFITMG2 (0 ),0x00000000 }, + {DDRC_FREQ1_RFSHTMG (0 ),0x000C001c }, + {DDRC_FREQ1_INIT3 (0 ),0x00840000 }, + {DDRC_FREQ1_INIT4 (0 ),0x00310000 }, + {DDRC_FREQ1_INIT6 (0 ),0x0066004a }, + {DDRC_FREQ1_INIT7 (0 ),0x0006004a }, + +/* Frequency 2: 100mbps */ + {DDRC_FREQ2_DRAMTMG0 (0 ),0x0d0b010c }, + {DDRC_FREQ2_DRAMTMG1 (0 ),0x00030410 }, + {DDRC_FREQ2_DRAMTMG2 (0 ),0x0203090c }, + {DDRC_FREQ2_DRAMTMG3 (0 ),0x00505006 }, + {DDRC_FREQ2_DRAMTMG4 (0 ),0x05040305 }, + {DDRC_FREQ2_DRAMTMG5 (0 ),0x0d0e0504 }, + {DDRC_FREQ2_DRAMTMG6 (0 ),0x0a060004 }, + {DDRC_FREQ2_DRAMTMG7 (0 ),0x0000090e }, + {DDRC_FREQ2_DRAMTMG14 (0 ),0x00000032 }, + {DDRC_FREQ2_DRAMTMG17 (0 ),0x0036001b }, + {DDRC_FREQ2_DERATEINT (0 ),0x7e9fbeb1 }, + {DDRC_FREQ2_DFITMG0 (0 ),0x03818200 }, + {DDRC_FREQ2_DFITMG2 (0 ),0x00000000 }, + {DDRC_FREQ2_RFSHTMG (0 ),0x0003800c }, + {DDRC_FREQ2_RFSHTMG (0 ),0x00030007 }, + {DDRC_FREQ2_INIT3 (0 ),0x00840000 }, + {DDRC_FREQ2_INIT4 (0 ),0x00310008 }, + {DDRC_FREQ2_INIT4 (0 ), (LPDDR4_MR3 <<16 ) |0x0000 }, + {DDRC_FREQ2_INIT6 (0 ),0x0066004a }, + {DDRC_FREQ2_INIT7 (0 ),0x0006004a }, + +/* boot start point */ + {DDRC_MSTR2 (0 ),0x2 },//DDRC_MSTR2 +}; + +/* PHY Initialize Configuration */ +struct dram_cfg_param lpddr4_ddrphy_cfg[] = { + {0x1005f ,0x1ff }, + {0x1015f ,0x1ff }, + {0x1105f ,0x1ff }, + {0x1115f ,0x1ff }, + {0x1205f ,0x1ff }, + {0x1215f ,0x1ff }, + {0x1305f ,0x1ff }, + {0x1315f ,0x1ff }, + + {0x11005f ,0x1ff }, + {0x11015f ,0x1ff }, + {0x11105f ,0x1ff }, + {0x11115f ,0x1ff }, + {0x11205f ,0x1ff }, + {0x11215f ,0x1ff }, + {0x11305f ,0x1ff }, + {0x11315f ,0x1ff }, + + {0x21005f ,0x1ff }, + {0x21015f ,0x1ff }, + {0x21105f ,0x1ff }, + {0x21115f ,0x1ff }, + {0x21205f ,0x1ff }, + {0x21215f ,0x1ff }, + {0x21305f ,0x1ff }, + {0x21315f ,0x1ff }, + + {0x55 ,0x1ff }, + {0x1055 ,0x1ff }, + {0x2055 ,0x1ff }, + {0x3055 ,0x1ff }, + {0x4055 ,0x1ff }, + {0x5055 ,0x1ff }, + {0x6055 ,0x1ff }, + {0x7055 ,0x1ff }, + {0x8055 ,0x1ff }, + {0x9055 ,0x1ff }, + + {0x200c5 ,0x19 }, + {0x1200c5 ,0x7 }, + {0x2200c5 ,0x7 }, + + {0x2002e ,0x2 }, + {0x12002e ,0x2 }, + {0x22002e ,0x2 }, + + {0x90204 ,0x0 }, + {0x190204 ,0x0 }, + {0x290204 ,0x0 }, + + {0x20024 ,0xab }, + {0x2003a ,0x0 }, + + {0x120024 ,0xab }, + {0x2003a ,0x0 }, + + {0x220024 ,0xab }, + {0x2003a ,0x0 }, + + {0x20056 ,0x3 }, + {0x120056 ,0xa }, + {0x220056 ,0xa }, + + {0x1004d ,0xe00 }, + {0x1014d ,0xe00 }, + {0x1104d ,0xe00 }, + {0x1114d ,0xe00 }, + {0x1204d ,0xe00 }, + {0x1214d ,0xe00 }, + {0x1304d ,0xe00 }, + {0x1314d ,0xe00 }, + + {0x11004d ,0xe00 }, + {0x11014d ,0xe00 }, + {0x11104d ,0xe00 }, + {0x11114d ,0xe00 }, + {0x11204d ,0xe00 }, + {0x11214d ,0xe00 }, + {0x11304d ,0xe00 }, + {0x11314d ,0xe00 }, + + {0x21004d ,0xe00 }, + {0x21014d ,0xe00 }, + {0x21104d ,0xe00 }, + {0x21114d ,0xe00 }, + {0x21204d ,0xe00 }, + {0x21214d ,0xe00 }, + {0x21304d ,0xe00 }, + {0x21314d ,0xe00 }, + + {0x10049 ,0xfbe }, + {0x10149 ,0xfbe }, + {0x11049 ,0xfbe }, + {0x11149 ,0xfbe }, + {0x12049 ,0xfbe }, + {0x12149 ,0xfbe }, + {0x13049 ,0xfbe }, + {0x13149 ,0xfbe }, + + {0x110049 ,0xfbe }, + {0x110149 ,0xfbe }, + {0x111049 ,0xfbe }, + {0x111149 ,0xfbe }, + {0x112049 ,0xfbe }, + {0x112149 ,0xfbe }, + {0x113049 ,0xfbe }, + {0x113149 ,0xfbe }, + + {0x210049 ,0xfbe }, + {0x210149 ,0xfbe }, + {0x211049 ,0xfbe }, + {0x211149 ,0xfbe }, + {0x212049 ,0xfbe }, + {0x212149 ,0xfbe }, + {0x213049 ,0xfbe }, + {0x213149 ,0xfbe }, + + {0x43 ,0x63 }, + {0x1043 ,0x63 }, + {0x2043 ,0x63 }, + {0x3043 ,0x63 }, + {0x4043 ,0x63 }, + {0x5043 ,0x63 }, + {0x6043 ,0x63 }, + {0x7043 ,0x63 }, + {0x8043 ,0x63 }, + {0x9043 ,0x63 }, + + {0x20018 ,0x3 }, + {0x20075 ,0x4 }, + {0x20050 ,0x0 }, + {0x20008 ,0x2ee }, + {0x120008 ,0x64 }, + {0x220008 ,0x19 }, + {0x20088 ,0x9 }, + + {0x200b2 ,0x1d4 }, + {0x10043 ,0x5a1 }, + {0x10143 ,0x5a1 }, + {0x11043 ,0x5a1 }, + {0x11143 ,0x5a1 }, + {0x12043 ,0x5a1 }, + {0x12143 ,0x5a1 }, + {0x13043 ,0x5a1 }, + {0x13143 ,0x5a1 }, + + {0x1200b2 ,0xdc }, + {0x110043 ,0x5a1 }, + {0x110143 ,0x5a1 }, + {0x111043 ,0x5a1 }, + {0x111143 ,0x5a1 }, + {0x112043 ,0x5a1 }, + {0x112143 ,0x5a1 }, + {0x113043 ,0x5a1 }, + {0x113143 ,0x5a1 }, + + {0x2200b2 ,0xdc }, + {0x210043 ,0x5a1 }, + {0x210143 ,0x5a1 }, + {0x211043 ,0x5a1 }, + {0x211143 ,0x5a1 }, + {0x212043 ,0x5a1 }, + {0x212143 ,0x5a1 }, + {0x213043 ,0x5a1 }, + {0x213143 ,0x5a1 }, + + {0x200fa ,0x1 }, + {0x1200fa ,0x1 }, + {0x2200fa ,0x1 }, + + {0x20019 ,0x1 }, + {0x120019 ,0x1 }, + {0x220019 ,0x1 }, + + {0x200f0 ,0x660 }, + {0x200f1 ,0x0 }, + {0x200f2 ,0x4444 }, + {0x200f3 ,0x8888 }, + {0x200f4 ,0x5665 }, + {0x200f5 ,0x0 }, + {0x200f6 ,0x0 }, + {0x200f7 ,0xf000 }, +board/freescale/imx8mm_evk/lpddr4_timing.c line 319
Quoted 10 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +10
-0+ { 0x20025, 0x0 }, + { 0x2002d, LPDDR4_PHY_DMIPinPresent }, + { 0x12002d, LPDDR4_PHY_DMIPinPresent }, + { 0x22002d, LPDDR4_PHY_DMIPinPresent }, + { 0x200c7, 0x21 }, + { 0x200ca, 0x24 }, + { 0x1200c7, 0x21 }, + { 0x1200ca, 0x24 }, + { 0x2200c7, 0x21 }, + { 0x2200ca, 0x24 },Why do you add tuple - offset and value? Shouldn't we have the DDR training functions here?
It is possible to train IMX6Q and Vybrid's DDR3 (as fair as I know). Would it be also possible to add the DDR4 training code for IMX8?
Quoted 714 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +714
-0+}; + +/* ddr phy trained csr */ +struct dram_cfg_param lpddr4_ddrphy_trained_csr[] = { + {0x200b2 ,0x0 }, + {0x1200b2 ,0x0 }, + {0x2200b2 ,0x0 }, + {0x200cb ,0x0 }, + {0x10043 ,0x0 }, + {0x110043 ,0x0 }, + {0x210043 ,0x0 }, + {0x10143 ,0x0 }, + {0x110143 ,0x0 }, + {0x210143 ,0x0 }, + {0x11043 ,0x0 }, + {0x111043 ,0x0 }, + {0x211043 ,0x0 }, + {0x11143 ,0x0 }, + {0x111143 ,0x0 }, + {0x211143 ,0x0 }, + {0x12043 ,0x0 }, + {0x112043 ,0x0 }, + {0x212043 ,0x0 }, + {0x12143 ,0x0 }, + {0x112143 ,0x0 }, + {0x212143 ,0x0 }, + {0x13043 ,0x0 }, + {0x113043 ,0x0 }, + {0x213043 ,0x0 }, + {0x13143 ,0x0 }, + {0x113143 ,0x0 }, + {0x213143 ,0x0 }, + {0x80 ,0x0 }, + {0x100080 ,0x0 }, + {0x200080 ,0x0 }, + {0x1080 ,0x0 }, + {0x101080 ,0x0 }, + {0x201080 ,0x0 }, + {0x2080 ,0x0 }, + {0x102080 ,0x0 }, + {0x202080 ,0x0 }, + {0x3080 ,0x0 }, + {0x103080 ,0x0 }, + {0x203080 ,0x0 }, + {0x4080 ,0x0 }, + {0x104080 ,0x0 }, + {0x204080 ,0x0 }, + {0x5080 ,0x0 }, + {0x105080 ,0x0 }, + {0x205080 ,0x0 }, + {0x6080 ,0x0 }, + {0x106080 ,0x0 }, + {0x206080 ,0x0 }, + {0x7080 ,0x0 }, + {0x107080 ,0x0 }, + {0x207080 ,0x0 }, + {0x8080 ,0x0 }, + {0x108080 ,0x0 }, + {0x208080 ,0x0 }, + {0x9080 ,0x0 }, + {0x109080 ,0x0 }, + {0x209080 ,0x0 }, + {0x10080 ,0x0 }, + {0x110080 ,0x0 }, + {0x210080 ,0x0 }, + {0x10180 ,0x0 }, + {0x110180 ,0x0 }, + {0x210180 ,0x0 }, + {0x11080 ,0x0 }, + {0x111080 ,0x0 }, + {0x211080 ,0x0 }, + {0x11180 ,0x0 }, + {0x111180 ,0x0 }, + {0x211180 ,0x0 }, + {0x12080 ,0x0 }, + {0x112080 ,0x0 }, + {0x212080 ,0x0 }, + {0x12180 ,0x0 }, + {0x112180 ,0x0 }, + {0x212180 ,0x0 }, + {0x13080 ,0x0 }, + {0x113080 ,0x0 }, + {0x213080 ,0x0 }, + {0x13180 ,0x0 }, + {0x113180 ,0x0 }, + {0x213180 ,0x0 }, + {0x10081 ,0x0 }, + {0x110081 ,0x0 }, + {0x210081 ,0x0 }, + {0x10181 ,0x0 }, + {0x110181 ,0x0 }, + {0x210181 ,0x0 }, + {0x11081 ,0x0 }, + {0x111081 ,0x0 }, + {0x211081 ,0x0 }, + {0x11181 ,0x0 }, + {0x111181 ,0x0 }, + {0x211181 ,0x0 }, + {0x12081 ,0x0 }, + {0x112081 ,0x0 }, + {0x212081 ,0x0 }, + {0x12181 ,0x0 }, + {0x112181 ,0x0 }, + {0x212181 ,0x0 }, + {0x13081 ,0x0 }, + {0x113081 ,0x0 }, + {0x213081 ,0x0 }, + {0x13181 ,0x0 }, + {0x113181 ,0x0 }, + {0x213181 ,0x0 }, + {0x100d0 ,0x0 }, + {0x1100d0 ,0x0 }, + {0x2100d0 ,0x0 }, + {0x101d0 ,0x0 }, + {0x1101d0 ,0x0 }, + {0x2101d0 ,0x0 }, + {0x110d0 ,0x0 }, + {0x1110d0 ,0x0 }, + {0x2110d0 ,0x0 }, + {0x111d0 ,0x0 }, + {0x1111d0 ,0x0 }, + {0x2111d0 ,0x0 }, + {0x120d0 ,0x0 }, + {0x1120d0 ,0x0 }, + {0x2120d0 ,0x0 }, + {0x121d0 ,0x0 }, + {0x1121d0 ,0x0 }, + {0x2121d0 ,0x0 }, + {0x130d0 ,0x0 }, + {0x1130d0 ,0x0 }, + {0x2130d0 ,0x0 }, + {0x131d0 ,0x0 }, + {0x1131d0 ,0x0 }, + {0x2131d0 ,0x0 }, + {0x100d1 ,0x0 }, + {0x1100d1 ,0x0 }, + {0x2100d1 ,0x0 }, + {0x101d1 ,0x0 }, + {0x1101d1 ,0x0 }, + {0x2101d1 ,0x0 }, + {0x110d1 ,0x0 }, + {0x1110d1 ,0x0 }, + {0x2110d1 ,0x0 }, + {0x111d1 ,0x0 }, + {0x1111d1 ,0x0 }, + {0x2111d1 ,0x0 }, + {0x120d1 ,0x0 }, + {0x1120d1 ,0x0 }, + {0x2120d1 ,0x0 }, + {0x121d1 ,0x0 }, + {0x1121d1 ,0x0 }, + {0x2121d1 ,0x0 }, + {0x130d1 ,0x0 }, + {0x1130d1 ,0x0 }, + {0x2130d1 ,0x0 }, + {0x131d1 ,0x0 }, + {0x1131d1 ,0x0 }, + {0x2131d1 ,0x0 }, + {0x10068 ,0x0 }, + {0x10168 ,0x0 }, + {0x10268 ,0x0 }, + {0x10368 ,0x0 }, + {0x10468 ,0x0 }, + {0x10568 ,0x0 }, + {0x10668 ,0x0 }, + {0x10768 ,0x0 }, + {0x10868 ,0x0 }, + {0x11068 ,0x0 }, + {0x11168 ,0x0 }, + {0x11268 ,0x0 }, + {0x11368 ,0x0 }, + {0x11468 ,0x0 }, + {0x11568 ,0x0 }, + {0x11668 ,0x0 }, + {0x11768 ,0x0 }, + {0x11868 ,0x0 }, + {0x12068 ,0x0 }, + {0x12168 ,0x0 }, + {0x12268 ,0x0 }, + {0x12368 ,0x0 }, + {0x12468 ,0x0 }, + {0x12568 ,0x0 }, + {0x12668 ,0x0 }, + {0x12768 ,0x0 }, + {0x12868 ,0x0 }, + {0x13068 ,0x0 }, + {0x13168 ,0x0 }, + {0x13268 ,0x0 }, + {0x13368 ,0x0 }, + {0x13468 ,0x0 }, + {0x13568 ,0x0 }, + {0x13668 ,0x0 }, + {0x13768 ,0x0 }, + {0x13868 ,0x0 }, + {0x10069 ,0x0 }, + {0x10169 ,0x0 }, + {0x10269 ,0x0 }, + {0x10369 ,0x0 }, + {0x10469 ,0x0 }, + {0x10569 ,0x0 }, + {0x10669 ,0x0 }, + {0x10769 ,0x0 }, + {0x10869 ,0x0 }, + {0x11069 ,0x0 }, + {0x11169 ,0x0 }, + {0x11269 ,0x0 }, + {0x11369 ,0x0 }, + {0x11469 ,0x0 }, + {0x11569 ,0x0 }, + {0x11669 ,0x0 }, + {0x11769 ,0x0 }, + {0x11869 ,0x0 }, + {0x12069 ,0x0 }, + {0x12169 ,0x0 }, + {0x12269 ,0x0 }, + {0x12369 ,0x0 }, + {0x12469 ,0x0 }, + {0x12569 ,0x0 }, + {0x12669 ,0x0 }, + {0x12769 ,0x0 }, + {0x12869 ,0x0 }, + {0x13069 ,0x0 }, + {0x13169 ,0x0 }, + {0x13269 ,0x0 }, + {0x13369 ,0x0 }, + {0x13469 ,0x0 }, + {0x13569 ,0x0 }, + {0x13669 ,0x0 }, + {0x13769 ,0x0 }, + {0x13869 ,0x0 }, + {0x1008c ,0x0 }, + {0x11008c ,0x0 }, + {0x21008c ,0x0 }, + {0x1018c ,0x0 }, + {0x11018c ,0x0 }, + {0x21018c ,0x0 }, + {0x1108c ,0x0 }, + {0x11108c ,0x0 }, + {0x21108c ,0x0 }, + {0x1118c ,0x0 }, + {0x11118c ,0x0 }, + {0x21118c ,0x0 }, + {0x1208c ,0x0 }, + {0x11208c ,0x0 }, + {0x21208c ,0x0 }, + {0x1218c ,0x0 }, + {0x11218c ,0x0 }, + {0x21218c ,0x0 }, + {0x1308c ,0x0 }, + {0x11308c ,0x0 }, + {0x21308c ,0x0 }, + {0x1318c ,0x0 }, + {0x11318c ,0x0 }, + {0x21318c ,0x0 }, + {0x1008d ,0x0 }, + {0x11008d ,0x0 }, + {0x21008d ,0x0 }, + {0x1018d ,0x0 }, + {0x11018d ,0x0 }, + {0x21018d ,0x0 }, + {0x1108d ,0x0 }, + {0x11108d ,0x0 }, + {0x21108d ,0x0 }, + {0x1118d ,0x0 }, + {0x11118d ,0x0 }, + {0x21118d ,0x0 }, + {0x1208d ,0x0 }, + {0x11208d ,0x0 }, + {0x21208d ,0x0 }, + {0x1218d ,0x0 }, + {0x11218d ,0x0 }, + {0x21218d ,0x0 }, + {0x1308d ,0x0 }, + {0x11308d ,0x0 }, + {0x21308d ,0x0 }, + {0x1318d ,0x0 }, + {0x11318d ,0x0 }, + {0x21318d ,0x0 }, + {0x100c0 ,0x0 }, + {0x1100c0 ,0x0 }, + {0x2100c0 ,0x0 }, + {0x101c0 ,0x0 }, + {0x1101c0 ,0x0 }, + {0x2101c0 ,0x0 }, + {0x102c0 ,0x0 }, + {0x1102c0 ,0x0 }, + {0x2102c0 ,0x0 }, + {0x103c0 ,0x0 }, + {0x1103c0 ,0x0 }, + {0x2103c0 ,0x0 }, + {0x104c0 ,0x0 }, + {0x1104c0 ,0x0 }, + {0x2104c0 ,0x0 }, + {0x105c0 ,0x0 }, + {0x1105c0 ,0x0 }, + {0x2105c0 ,0x0 }, + {0x106c0 ,0x0 }, + {0x1106c0 ,0x0 }, + {0x2106c0 ,0x0 }, + {0x107c0 ,0x0 }, + {0x1107c0 ,0x0 }, + {0x2107c0 ,0x0 }, + {0x108c0 ,0x0 }, + {0x1108c0 ,0x0 }, + {0x2108c0 ,0x0 }, + {0x110c0 ,0x0 }, + {0x1110c0 ,0x0 }, + {0x2110c0 ,0x0 }, + {0x111c0 ,0x0 }, + {0x1111c0 ,0x0 }, + {0x2111c0 ,0x0 }, + {0x112c0 ,0x0 }, + {0x1112c0 ,0x0 }, + {0x2112c0 ,0x0 }, + {0x113c0 ,0x0 }, + {0x1113c0 ,0x0 }, + {0x2113c0 ,0x0 }, + {0x114c0 ,0x0 }, + {0x1114c0 ,0x0 }, + {0x2114c0 ,0x0 }, + {0x115c0 ,0x0 }, + {0x1115c0 ,0x0 }, + {0x2115c0 ,0x0 }, + {0x116c0 ,0x0 }, + {0x1116c0 ,0x0 }, + {0x2116c0 ,0x0 }, + {0x117c0 ,0x0 }, + {0x1117c0 ,0x0 }, + {0x2117c0 ,0x0 }, + {0x118c0 ,0x0 }, + {0x1118c0 ,0x0 }, + {0x2118c0 ,0x0 }, + {0x120c0 ,0x0 }, + {0x1120c0 ,0x0 }, + {0x2120c0 ,0x0 }, + {0x121c0 ,0x0 }, + {0x1121c0 ,0x0 }, + {0x2121c0 ,0x0 }, + {0x122c0 ,0x0 }, + {0x1122c0 ,0x0 }, + {0x2122c0 ,0x0 }, + {0x123c0 ,0x0 }, + {0x1123c0 ,0x0 }, + {0x2123c0 ,0x0 }, + {0x124c0 ,0x0 }, + {0x1124c0 ,0x0 }, + {0x2124c0 ,0x0 }, + {0x125c0 ,0x0 }, + {0x1125c0 ,0x0 }, + {0x2125c0 ,0x0 }, + {0x126c0 ,0x0 }, + {0x1126c0 ,0x0 }, + {0x2126c0 ,0x0 }, + {0x127c0 ,0x0 }, + {0x1127c0 ,0x0 }, + {0x2127c0 ,0x0 }, + {0x128c0 ,0x0 }, + {0x1128c0 ,0x0 }, + {0x2128c0 ,0x0 }, + {0x130c0 ,0x0 }, + {0x1130c0 ,0x0 }, + {0x2130c0 ,0x0 }, + {0x131c0 ,0x0 }, + {0x1131c0 ,0x0 }, + {0x2131c0 ,0x0 }, + {0x132c0 ,0x0 }, + {0x1132c0 ,0x0 }, + {0x2132c0 ,0x0 }, + {0x133c0 ,0x0 }, + {0x1133c0 ,0x0 }, + {0x2133c0 ,0x0 }, + {0x134c0 ,0x0 }, + {0x1134c0 ,0x0 }, + {0x2134c0 ,0x0 }, + {0x135c0 ,0x0 }, + {0x1135c0 ,0x0 }, + {0x2135c0 ,0x0 }, + {0x136c0 ,0x0 }, + {0x1136c0 ,0x0 }, + {0x2136c0 ,0x0 }, + {0x137c0 ,0x0 }, + {0x1137c0 ,0x0 }, + {0x2137c0 ,0x0 }, + {0x138c0 ,0x0 }, + {0x1138c0 ,0x0 }, + {0x2138c0 ,0x0 }, + {0x100c1 ,0x0 }, + {0x1100c1 ,0x0 }, + {0x2100c1 ,0x0 }, + {0x101c1 ,0x0 }, + {0x1101c1 ,0x0 }, + {0x2101c1 ,0x0 }, + {0x102c1 ,0x0 }, + {0x1102c1 ,0x0 }, + {0x2102c1 ,0x0 }, + {0x103c1 ,0x0 }, + {0x1103c1 ,0x0 }, + {0x2103c1 ,0x0 }, + {0x104c1 ,0x0 }, + {0x1104c1 ,0x0 }, + {0x2104c1 ,0x0 }, + {0x105c1 ,0x0 }, + {0x1105c1 ,0x0 }, + {0x2105c1 ,0x0 }, + {0x106c1 ,0x0 }, + {0x1106c1 ,0x0 }, + {0x2106c1 ,0x0 }, + {0x107c1 ,0x0 }, + {0x1107c1 ,0x0 }, + {0x2107c1 ,0x0 }, + {0x108c1 ,0x0 }, + {0x1108c1 ,0x0 }, + {0x2108c1 ,0x0 }, + {0x110c1 ,0x0 }, + {0x1110c1 ,0x0 }, + {0x2110c1 ,0x0 }, + {0x111c1 ,0x0 }, + {0x1111c1 ,0x0 }, + {0x2111c1 ,0x0 }, + {0x112c1 ,0x0 }, + {0x1112c1 ,0x0 }, + {0x2112c1 ,0x0 }, + {0x113c1 ,0x0 }, + {0x1113c1 ,0x0 }, + {0x2113c1 ,0x0 }, + {0x114c1 ,0x0 }, + {0x1114c1 ,0x0 }, + {0x2114c1 ,0x0 }, + {0x115c1 ,0x0 }, + {0x1115c1 ,0x0 }, + {0x2115c1 ,0x0 }, + {0x116c1 ,0x0 }, + {0x1116c1 ,0x0 }, + {0x2116c1 ,0x0 }, + {0x117c1 ,0x0 }, + {0x1117c1 ,0x0 }, + {0x2117c1 ,0x0 }, + {0x118c1 ,0x0 }, + {0x1118c1 ,0x0 }, + {0x2118c1 ,0x0 }, + {0x120c1 ,0x0 }, + {0x1120c1 ,0x0 }, + {0x2120c1 ,0x0 }, + {0x121c1 ,0x0 }, + {0x1121c1 ,0x0 }, + {0x2121c1 ,0x0 }, + {0x122c1 ,0x0 }, + {0x1122c1 ,0x0 }, + {0x2122c1 ,0x0 }, + {0x123c1 ,0x0 }, + {0x1123c1 ,0x0 }, + {0x2123c1 ,0x0 }, + {0x124c1 ,0x0 }, + {0x1124c1 ,0x0 }, + {0x2124c1 ,0x0 }, + {0x125c1 ,0x0 }, + {0x1125c1 ,0x0 }, + {0x2125c1 ,0x0 }, + {0x126c1 ,0x0 }, + {0x1126c1 ,0x0 }, + {0x2126c1 ,0x0 }, + {0x127c1 ,0x0 }, + {0x1127c1 ,0x0 }, + {0x2127c1 ,0x0 }, + {0x128c1 ,0x0 }, + {0x1128c1 ,0x0 }, + {0x2128c1 ,0x0 }, + {0x130c1 ,0x0 }, + {0x1130c1 ,0x0 }, + {0x2130c1 ,0x0 }, + {0x131c1 ,0x0 }, + {0x1131c1 ,0x0 }, + {0x2131c1 ,0x0 }, + {0x132c1 ,0x0 }, + {0x1132c1 ,0x0 }, + {0x2132c1 ,0x0 }, + {0x133c1 ,0x0 }, + {0x1133c1 ,0x0 }, + {0x2133c1 ,0x0 }, + {0x134c1 ,0x0 }, + {0x1134c1 ,0x0 }, + {0x2134c1 ,0x0 }, + {0x135c1 ,0x0 }, + {0x1135c1 ,0x0 }, + {0x2135c1 ,0x0 }, + {0x136c1 ,0x0 }, + {0x1136c1 ,0x0 }, + {0x2136c1 ,0x0 }, + {0x137c1 ,0x0 }, + {0x1137c1 ,0x0 }, + {0x2137c1 ,0x0 }, + {0x138c1 ,0x0 }, + {0x1138c1 ,0x0 }, + {0x2138c1 ,0x0 }, + {0x10020 ,0x0 }, + {0x110020 ,0x0 }, + {0x210020 ,0x0 }, + {0x11020 ,0x0 }, + {0x111020 ,0x0 }, + {0x211020 ,0x0 }, + {0x12020 ,0x0 }, + {0x112020 ,0x0 }, + {0x212020 ,0x0 }, + {0x13020 ,0x0 }, + {0x113020 ,0x0 }, + {0x213020 ,0x0 }, + {0x20072 ,0x0 }, + {0x20073 ,0x0 }, + {0x20074 ,0x0 }, + {0x100aa ,0x0 }, + {0x110aa ,0x0 }, + {0x120aa ,0x0 }, + {0x130aa ,0x0 }, + {0x20010 ,0x0 }, + {0x120010 ,0x0 }, + {0x220010 ,0x0 }, + {0x20011 ,0x0 }, + {0x120011 ,0x0 }, + {0x220011 ,0x0 }, + {0x100ae ,0x0 }, + {0x1100ae ,0x0 }, + {0x2100ae ,0x0 }, + {0x100af ,0x0 }, + {0x1100af ,0x0 }, + {0x2100af ,0x0 }, + {0x110ae ,0x0 }, + {0x1110ae ,0x0 }, + {0x2110ae ,0x0 }, + {0x110af ,0x0 }, + {0x1110af ,0x0 }, + {0x2110af ,0x0 }, + {0x120ae ,0x0 }, + {0x1120ae ,0x0 }, + {0x2120ae ,0x0 }, + {0x120af ,0x0 }, + {0x1120af ,0x0 }, + {0x2120af ,0x0 }, + {0x130ae ,0x0 }, + {0x1130ae ,0x0 }, + {0x2130ae ,0x0 }, + {0x130af ,0x0 }, + {0x1130af ,0x0 }, + {0x2130af ,0x0 }, + {0x20020 ,0x0 }, + {0x120020 ,0x0 }, + {0x220020 ,0x0 }, + {0x100a0 ,0x0 }, + {0x100a1 ,0x0 }, + {0x100a2 ,0x0 }, + {0x100a3 ,0x0 }, + {0x100a4 ,0x0 }, + {0x100a5 ,0x0 }, + {0x100a6 ,0x0 }, + {0x100a7 ,0x0 }, + {0x110a0 ,0x0 }, + {0x110a1 ,0x0 }, + {0x110a2 ,0x0 }, + {0x110a3 ,0x0 }, + {0x110a4 ,0x0 }, + {0x110a5 ,0x0 }, + {0x110a6 ,0x0 }, + {0x110a7 ,0x0 }, + {0x120a0 ,0x0 }, + {0x120a1 ,0x0 }, + {0x120a2 ,0x0 }, + {0x120a3 ,0x0 }, + {0x120a4 ,0x0 }, + {0x120a5 ,0x0 }, + {0x120a6 ,0x0 }, + {0x120a7 ,0x0 }, + {0x130a0 ,0x0 }, + {0x130a1 ,0x0 }, + {0x130a2 ,0x0 }, + {0x130a3 ,0x0 }, + {0x130a4 ,0x0 }, + {0x130a5 ,0x0 }, + {0x130a6 ,0x0 }, + {0x130a7 ,0x0 }, + {0x2007c ,0x0 }, + {0x12007c ,0x0 }, + {0x22007c ,0x0 }, + {0x2007d ,0x0 }, + {0x12007d ,0x0 }, + {0x22007d ,0x0 }, + {0x400fd ,0x0 }, + {0x400c0 ,0x0 }, + {0x90201 ,0x0 }, + {0x190201 ,0x0 }, + {0x290201 ,0x0 }, + {0x90202 ,0x0 }, + {0x190202 ,0x0 }, + {0x290202 ,0x0 }, + {0x90203 ,0x0 }, + {0x190203 ,0x0 }, + {0x290203 ,0x0 }, + {0x90204 ,0x0 }, + {0x190204 ,0x0 }, + {0x290204 ,0x0 }, + {0x90205 ,0x0 }, + {0x190205 ,0x0 }, + {0x290205 ,0x0 }, + {0x90206 ,0x0 }, + {0x190206 ,0x0 }, + {0x290206 ,0x0 }, + {0x90207 ,0x0 }, + {0x190207 ,0x0 }, + {0x290207 ,0x0 }, + {0x90208 ,0x0 }, + {0x190208 ,0x0 }, + {0x290208 ,0x0 }, + {0x10062 ,0x0 }, + {0x10162 ,0x0 }, + {0x10262 ,0x0 }, + {0x10362 ,0x0 }, + {0x10462 ,0x0 }, + {0x10562 ,0x0 }, + {0x10662 ,0x0 }, + {0x10762 ,0x0 }, + {0x10862 ,0x0 }, + {0x11062 ,0x0 }, + {0x11162 ,0x0 }, + {0x11262 ,0x0 }, + {0x11362 ,0x0 }, + {0x11462 ,0x0 }, + {0x11562 ,0x0 }, + {0x11662 ,0x0 }, + {0x11762 ,0x0 }, + {0x11862 ,0x0 }, + {0x12062 ,0x0 }, + {0x12162 ,0x0 }, + {0x12262 ,0x0 }, + {0x12362 ,0x0 }, + {0x12462 ,0x0 }, + {0x12562 ,0x0 }, + {0x12662 ,0x0 }, + {0x12762 ,0x0 }, + {0x12862 ,0x0 }, + {0x13062 ,0x0 }, + {0x13162 ,0x0 }, + {0x13262 ,0x0 }, + {0x13362 ,0x0 }, + {0x13462 ,0x0 }, + {0x13562 ,0x0 }, + {0x13662 ,0x0 }, + {0x13762 ,0x0 }, + {0x13862 ,0x0 }, + {0x20077 ,0x0 }, + {0x10001 ,0x0 }, + {0x11001 ,0x0 }, + {0x12001 ,0x0 }, + {0x13001 ,0x0 }, + {0x10040 ,0x0 }, + {0x10140 ,0x0 }, + {0x10240 ,0x0 }, + {0x10340 ,0x0 }, + {0x10440 ,0x0 }, + {0x10540 ,0x0 }, + {0x10640 ,0x0 }, + {0x10740 ,0x0 }, + {0x10840 ,0x0 }, + {0x10030 ,0x0 }, + {0x10130 ,0x0 }, + {0x10230 ,0x0 }, + {0x10330 ,0x0 }, + {0x10430 ,0x0 }, + {0x10530 ,0x0 }, + {0x10630 ,0x0 }, + {0x10730 ,0x0 }, + {0x10830 ,0x0 }, + {0x11040 ,0x0 }, + {0x11140 ,0x0 }, + {0x11240 ,0x0 }, + {0x11340 ,0x0 }, + {0x11440 ,0x0 }, + {0x11540 ,0x0 }, + {0x11640 ,0x0 }, + {0x11740 ,0x0 }, + {0x11840 ,0x0 }, + {0x11030 ,0x0 }, + {0x11130 ,0x0 }, + {0x11230 ,0x0 }, + {0x11330 ,0x0 }, + {0x11430 ,0x0 }, + {0x11530 ,0x0 }, + {0x11630 ,0x0 }, + {0x11730 ,0x0 }, + {0x11830 ,0x0 }, + {0x12040 ,0x0 }, + {0x12140 ,0x0 }, + {0x12240 ,0x0 }, + {0x12340 ,0x0 }, + {0x12440 ,0x0 }, + {0x12540 ,0x0 }, + {0x12640 ,0x0 }, + {0x12740 ,0x0 }, + {0x12840 ,0x0 }, + {0x12030 ,0x0 }, + {0x12130 ,0x0 }, + {0x12230 ,0x0 }, + {0x12330 ,0x0 }, + {0x12430 ,0x0 }, + {0x12530 ,0x0 }, + {0x12630 ,0x0 }, + {0x12730 ,0x0 }, + {0x12830 ,0x0 }, + {0x13040 ,0x0 }, + {0x13140 ,0x0 }, + {0x13240 ,0x0 }, + {0x13340 ,0x0 }, + {0x13440 ,0x0 }, + {0x13540 ,0x0 }, + {0x13640 ,0x0 }, + {0x13740 ,0x0 }, + {0x13840 ,0x0 },board/freescale/imx8mm_evk/lpddr4_timing.c line 1043
Quoted 10 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +10
-0+ { 0x13030, 0x0 }, + { 0x13130, 0x0 }, + { 0x13230, 0x0 }, + { 0x13330, 0x0 }, + { 0x13430, 0x0 }, + { 0x13530, 0x0 }, + { 0x13630, 0x0 }, + { 0x13730, 0x0 }, + { 0x13830, 0x0 }, +};The same as above. Please look into imx6q DDR3 training code.
Quoted 886 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +10
-0+ +/* P0 message block paremeter for training firmware */ +struct dram_cfg_param lpddr4_fsp0_cfg[] = { + {0xd0000 ,0x0 }, + {0x54000 ,0x0 }, + {0x54001 ,0x0 }, + {0x54002 ,0x0 }, + {0x54003 ,0xbb8 }, + {0x54004 ,0x2 }, + {0x54005 , ((LPDDR4_PHY_RON <<8 ) |LPDDR4_PHY_RTT ) },//PHY Ron/Rtt
board/freescale/imx8mm_evk/lpddr4_timing.c new file +75
-0+ { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x131f }, + { 0x54009, 0xc8 }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, 0x0 }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x0 }, + { 0x54010, 0x0 }, + { 0x54011, 0x0 }, + { 0x54012, (LPDDR4_CS << 8) | (0x110 & 0xff) }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x2dd4 }, + { 0x5401a, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x5401b, 0x4d66 }, + { 0x5401c, 0x4d08 }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0/*0x16*/ }, + { 0x5401f, 0x2dd4 }, + { 0x54020, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x54021, 0x4d66 }, + { 0x54022, 0x4d08 }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1/*0x16*/ }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, LPDDR4_CS }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0xd400 }, + { 0x54033, (LPDDR4_MR3 << 8) | (0x312d & 0xff) }, + { 0x54034, 0x6600 }, + { 0x54035, 0x84d }, + { 0x54036, 0x4d }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x1600*/ }, + { 0x54038, 0xd400 }, + { 0x54039, (LPDDR4_MR3 << 8) | (0x312d & 0xff) }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x84d }, + { 0x5403c, 0x4d }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x1600*/ }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* P1 message block paremeter for training firmware */ +struct dram_cfg_param lpddr4_fsp1_cfg[] = { + {0xd0000 ,0x0 }, + {0x54000 ,0x0 }, + {0x54001 ,0x0 }, + {0x54002 ,0x101 }, + {0x54003 ,0x190 }, + {0x54004 ,0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) },//PHYRon/Rtt
board/freescale/imx8mm_evk/lpddr4_timing.c new file +75
-0+ { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x121f }, + { 0x54009, 0xc8 }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, 0x0 }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x0 }, + { 0x54010, 0x0 }, + { 0x54011, 0x0 }, + { 0x54012, (LPDDR4_CS << 8) | (0x110 & 0xff) }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x84 }, + { 0x5401a, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x5401b, 0x4d66 }, + { 0x5401c, 0x4d08 }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0/*0x16*/ }, + { 0x5401f, 0x84 }, + { 0x54020, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x54021, 0x4d66 }, + { 0x54022, 0x4d08 }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1/*0x16*/ }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, LPDDR4_CS }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0x8400 }, + { 0x54033, (LPDDR4_MR3 << 8) | (0x3100 & 0xff) }, + { 0x54034, 0x6600 }, + { 0x54035, 0x84d }, + { 0x54036, 0x4d }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x1600*/ }, + { 0x54038, 0x8400 }, + { 0x54039, (LPDDR4_MR3 << 8) | (0x3100 & 0xff) }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x84d }, + { 0x5403c, 0x4d }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x1600*/ }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* P1 message block paremeter for training firmware */ +struct dram_cfg_param lpddr4_fsp2_cfg[] = { + {0xd0000 ,0x0 }, + {0x54000 ,0x0 }, + {0x54001 ,0x0 }, + {0x54002 ,0x102 }, + {0x54003 ,0x64 }, + {0x54004 ,0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) },//PHYRon/Rtt
board/freescale/imx8mm_evk/lpddr4_timing.c new file +75
-0+ { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x121f }, + { 0x54009, 0xc8 }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, 0x0 }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x0 }, + { 0x54010, 0x0 }, + { 0x54011, 0x0 }, + { 0x54012, (LPDDR4_CS << 8) | (0x110 & 0xff) }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x84 }, + { 0x5401a, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x5401b, 0x4d66 }, + { 0x5401c, 0x4d08 }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0/*0x16*/ }, + { 0x5401f, 0x84 }, + { 0x54020, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x54021, 0x4d66 }, + { 0x54022, 0x4d08 }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1/*0x16*/ }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, LPDDR4_CS }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0x8400 }, + { 0x54033, (LPDDR4_MR3 << 8) | (0x3100 & 0xff) }, + { 0x54034, 0x6600 }, + { 0x54035, 0x84d }, + { 0x54036, 0x4d }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x1600*/ }, + { 0x54038, 0x8400 }, + { 0x54039, (LPDDR4_MR3 << 8) | (0x3100 & 0xff) }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x84d }, + { 0x5403c, 0x4d }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x1600*/ }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* P0 2D message block paremeter for training firmware */ +struct dram_cfg_param lpddr4_fsp0_2d_cfg[] = { + {0xd0000 ,0x0 }, + {0x54000 ,0x0 }, + {0x54001 ,0x0 }, + {0x54002 ,0x0 }, + {0x54003 ,0xbb8 }, + {0x54004 ,0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) },//PHYRon/Rtt
board/freescale/imx8mm_evk/lpddr4_timing.c new file +647
-0+ { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x61 }, + { 0x54009, 0xc8 }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, 0x0 }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x100 }, + { 0x54010, 0x1f7f }, + { 0x54011, 0x0 }, + { 0x54012, (LPDDR4_CS << 8) | (0x110 & 0xff) }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x2dd4 }, + { 0x5401a, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x5401b, 0x4d66 }, + { 0x5401c, 0x4d08 }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0/*0x16*/ }, + { 0x5401f, 0x2dd4 }, + { 0x54020, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x54021, 0x4d66 }, + { 0x54022, 0x4d08 }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1/*0x16*/ }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, LPDDR4_CS }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0xd400 }, + { 0x54033, (LPDDR4_MR3 << 8) | (0x312d & 0xff) }, + { 0x54034, 0x6600 }, + { 0x54035, 0x84d }, + { 0x54036, 0x4d }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x1600*/ }, + { 0x54038, 0xd400 }, + { 0x54039, (LPDDR4_MR3 << 8) | (0x312d & 0xff) }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x84d }, + { 0x5403c, 0x4d }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x1600*/ }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* DRAM PHY init engine image */ +struct dram_cfg_param lpddr4_phy_pie[] = { + {0xd0000 ,0x0 }, + {0x90000 ,0x10 }, + {0x90001 ,0x400 }, + {0x90002 ,0x10e }, + {0x90003 ,0x0 }, + {0x90004 ,0x0 }, + {0x90005 ,0x8 }, + {0x90029 ,0xb }, + {0x9002a ,0x480 }, + {0x9002b ,0x109 }, + {0x9002c ,0x8 }, + {0x9002d ,0x448 }, + {0x9002e ,0x139 }, + {0x9002f ,0x8 }, + {0x90030 ,0x478 }, + {0x90031 ,0x109 }, + {0x90032 ,0x0 }, + {0x90033 ,0xe8 }, + {0x90034 ,0x109 }, + {0x90035 ,0x2 }, + {0x90036 ,0x10 }, + {0x90037 ,0x139 }, + {0x90038 ,0xf }, + {0x90039 ,0x7c0 }, + {0x9003a ,0x139 }, + {0x9003b ,0x44 }, + {0x9003c ,0x630 }, + {0x9003d ,0x159 }, + {0x9003e ,0x14f }, + {0x9003f ,0x630 }, + {0x90040 ,0x159 }, + {0x90041 ,0x47 }, + {0x90042 ,0x630 }, + {0x90043 ,0x149 }, + {0x90044 ,0x4f }, + {0x90045 ,0x630 }, + {0x90046 ,0x179 }, + {0x90047 ,0x8 }, + {0x90048 ,0xe0 }, + {0x90049 ,0x109 }, + {0x9004a ,0x0 }, + {0x9004b ,0x7c8 }, + {0x9004c ,0x109 }, + {0x9004d ,0x0 }, + {0x9004e ,0x1 }, + {0x9004f ,0x8 }, + {0x90050 ,0x0 }, + {0x90051 ,0x45a }, + {0x90052 ,0x9 }, + {0x90053 ,0x0 }, + {0x90054 ,0x448 }, + {0x90055 ,0x109 }, + {0x90056 ,0x40 }, + {0x90057 ,0x630 }, + {0x90058 ,0x179 }, + {0x90059 ,0x1 }, + {0x9005a ,0x618 }, + {0x9005b ,0x109 }, + {0x9005c ,0x40c0 }, + {0x9005d ,0x630 }, + {0x9005e ,0x149 }, + {0x9005f ,0x8 }, + {0x90060 ,0x4 }, + {0x90061 ,0x48 }, + {0x90062 ,0x4040 }, + {0x90063 ,0x630 }, + {0x90064 ,0x149 }, + {0x90065 ,0x0 }, + {0x90066 ,0x4 }, + {0x90067 ,0x48 }, + {0x90068 ,0x40 }, + {0x90069 ,0x630 }, + {0x9006a ,0x149 }, + {0x9006b ,0x10 }, + {0x9006c ,0x4 }, + {0x9006d ,0x18 }, + {0x9006e ,0x0 }, + {0x9006f ,0x4 }, + {0x90070 ,0x78 }, + {0x90071 ,0x549 }, + {0x90072 ,0x630 }, + {0x90073 ,0x159 }, + {0x90074 ,0xd49 }, + {0x90075 ,0x630 }, + {0x90076 ,0x159 }, + {0x90077 ,0x94a }, + {0x90078 ,0x630 }, + {0x90079 ,0x159 }, + {0x9007a ,0x441 }, + {0x9007b ,0x630 }, + {0x9007c ,0x149 }, + {0x9007d ,0x42 }, + {0x9007e ,0x630 }, + {0x9007f ,0x149 }, + {0x90080 ,0x1 }, + {0x90081 ,0x630 }, + {0x90082 ,0x149 }, + {0x90083 ,0x0 }, + {0x90084 ,0xe0 }, + {0x90085 ,0x109 }, + {0x90086 ,0xa }, + {0x90087 ,0x10 }, + {0x90088 ,0x109 }, + {0x90089 ,0x9 }, + {0x9008a ,0x3c0 }, + {0x9008b ,0x149 }, + {0x9008c ,0x9 }, + {0x9008d ,0x3c0 }, + {0x9008e ,0x159 }, + {0x9008f ,0x18 }, + {0x90090 ,0x10 }, + {0x90091 ,0x109 }, + {0x90092 ,0x0 }, + {0x90093 ,0x3c0 }, + {0x90094 ,0x109 }, + {0x90095 ,0x18 }, + {0x90096 ,0x4 }, + {0x90097 ,0x48 }, + {0x90098 ,0x18 }, + {0x90099 ,0x4 }, + {0x9009a ,0x58 }, + {0x9009b ,0xa }, + {0x9009c ,0x10 }, + {0x9009d ,0x109 }, + {0x9009e ,0x2 }, + {0x9009f ,0x10 }, + {0x900a0 ,0x109 }, + {0x900a1 ,0x5 }, + {0x900a2 ,0x7c0 }, + {0x900a3 ,0x109 }, + {0x900a4 ,0x10 }, + {0x900a5 ,0x10 }, + {0x900a6 ,0x109 }, + {0x40000 ,0x811 }, + {0x40020 ,0x880 }, + {0x40040 ,0x0 }, + {0x40060 ,0x0 }, + {0x40001 ,0x4008 }, + {0x40021 ,0x83 }, + {0x40041 ,0x4f }, + {0x40061 ,0x0 }, + {0x40002 ,0x4040 }, + {0x40022 ,0x83 }, + {0x40042 ,0x51 }, + {0x40062 ,0x0 }, + {0x40003 ,0x811 }, + {0x40023 ,0x880 }, + {0x40043 ,0x0 }, + {0x40063 ,0x0 }, + {0x40004 ,0x720 }, + {0x40024 ,0xf }, + {0x40044 ,0x1740 }, + {0x40064 ,0x0 }, + {0x40005 ,0x16 }, + {0x40025 ,0x83 }, + {0x40045 ,0x4b }, + {0x40065 ,0x0 }, + {0x40006 ,0x716 }, + {0x40026 ,0xf }, + {0x40046 ,0x2001 }, + {0x40066 ,0x0 }, + {0x40007 ,0x716 }, + {0x40027 ,0xf }, + {0x40047 ,0x2800 }, + {0x40067 ,0x0 }, + {0x40008 ,0x716 }, + {0x40028 ,0xf }, + {0x40048 ,0xf00 }, + {0x40068 ,0x0 }, + {0x40009 ,0x720 }, + {0x40029 ,0xf }, + {0x40049 ,0x1400 }, + {0x40069 ,0x0 }, + {0x4000a ,0xe08 }, + {0x4002a ,0xc15 }, + {0x4004a ,0x0 }, + {0x4006a ,0x0 }, + {0x4000b ,0x623 }, + {0x4002b ,0x15 }, + {0x4004b ,0x0 }, + {0x4006b ,0x0 }, + {0x4000c ,0x4028 }, + {0x4002c ,0x80 }, + {0x4004c ,0x0 }, + {0x4006c ,0x0 }, + {0x4000d ,0xe08 }, + {0x4002d ,0xc1a }, + {0x4004d ,0x0 }, + {0x4006d ,0x0 }, + {0x4000e ,0x623 }, + {0x4002e ,0x1a }, + {0x4004e ,0x0 }, + {0x4006e ,0x0 }, + {0x4000f ,0x4040 }, + {0x4002f ,0x80 }, + {0x4004f ,0x0 }, + {0x4006f ,0x0 }, + {0x40010 ,0x2604 }, + {0x40030 ,0x15 }, + {0x40050 ,0x0 }, + {0x40070 ,0x0 }, + {0x40011 ,0x708 }, + {0x40031 ,0x5 }, + {0x40051 ,0x0 }, + {0x40071 ,0x2002 }, + {0x40012 ,0x8 }, + {0x40032 ,0x80 }, + {0x40052 ,0x0 }, + {0x40072 ,0x0 }, + {0x40013 ,0x2604 }, + {0x40033 ,0x1a }, + {0x40053 ,0x0 }, + {0x40073 ,0x0 }, + {0x40014 ,0x708 }, + {0x40034 ,0xa }, + {0x40054 ,0x0 }, + {0x40074 ,0x2002 }, + {0x40015 ,0x4040 }, + {0x40035 ,0x80 }, + {0x40055 ,0x0 }, + {0x40075 ,0x0 }, + {0x40016 ,0x60a }, + {0x40036 ,0x15 }, + {0x40056 ,0x1200 }, + {0x40076 ,0x0 }, + {0x40017 ,0x61a }, + {0x40037 ,0x15 }, + {0x40057 ,0x1300 }, + {0x40077 ,0x0 }, + {0x40018 ,0x60a }, + {0x40038 ,0x1a }, + {0x40058 ,0x1200 }, + {0x40078 ,0x0 }, + {0x40019 ,0x642 }, + {0x40039 ,0x1a }, + {0x40059 ,0x1300 }, + {0x40079 ,0x0 }, + {0x4001a ,0x4808 }, + {0x4003a ,0x880 }, + {0x4005a ,0x0 }, + {0x4007a ,0x0 }, + {0x900a7 ,0x0 }, + {0x900a8 ,0x790 }, + {0x900a9 ,0x11a }, + {0x900aa ,0x8 }, + {0x900ab ,0x7aa }, + {0x900ac ,0x2a }, + {0x900ad ,0x10 }, + {0x900ae ,0x7b2 }, + {0x900af ,0x2a }, + {0x900b0 ,0x0 }, + {0x900b1 ,0x7c8 }, + {0x900b2 ,0x109 }, + {0x900b3 ,0x10 }, + {0x900b4 ,0x2a8 }, + {0x900b5 ,0x129 }, + {0x900b6 ,0x8 }, + {0x900b7 ,0x370 }, + {0x900b8 ,0x129 }, + {0x900b9 ,0xa }, + {0x900ba ,0x3c8 }, + {0x900bb ,0x1a9 }, + {0x900bc ,0xc }, + {0x900bd ,0x408 }, + {0x900be ,0x199 }, + {0x900bf ,0x14 }, + {0x900c0 ,0x790 }, + {0x900c1 ,0x11a }, + {0x900c2 ,0x8 }, + {0x900c3 ,0x4 }, + {0x900c4 ,0x18 }, + {0x900c5 ,0xe }, + {0x900c6 ,0x408 }, + {0x900c7 ,0x199 }, + {0x900c8 ,0x8 }, + {0x900c9 ,0x8568 }, + {0x900ca ,0x108 }, + {0x900cb ,0x18 }, + {0x900cc ,0x790 }, + {0x900cd ,0x16a }, + {0x900ce ,0x8 }, + {0x900cf ,0x1d8 }, + {0x900d0 ,0x169 }, + {0x900d1 ,0x10 }, + {0x900d2 ,0x8558 }, + {0x900d3 ,0x168 }, + {0x900d4 ,0x70 }, + {0x900d5 ,0x788 }, + {0x900d6 ,0x16a }, + {0x900d7 ,0x1ff8 }, + {0x900d8 ,0x85a8 }, + {0x900d9 ,0x1e8 }, + {0x900da ,0x50 }, + {0x900db ,0x798 }, + {0x900dc ,0x16a }, + {0x900dd ,0x60 }, + {0x900de ,0x7a0 }, + {0x900df ,0x16a }, + {0x900e0 ,0x8 }, + {0x900e1 ,0x8310 }, + {0x900e2 ,0x168 }, + {0x900e3 ,0x8 }, + {0x900e4 ,0xa310 }, + {0x900e5 ,0x168 }, + {0x900e6 ,0xa }, + {0x900e7 ,0x408 }, + {0x900e8 ,0x169 }, + {0x900e9 ,0x6e }, + {0x900ea ,0x0 }, + {0x900eb ,0x68 }, + {0x900ec ,0x0 }, + {0x900ed ,0x408 }, + {0x900ee ,0x169 }, + {0x900ef ,0x0 }, + {0x900f0 ,0x8310 }, + {0x900f1 ,0x168 }, + {0x900f2 ,0x0 }, + {0x900f3 ,0xa310 }, + {0x900f4 ,0x168 }, + {0x900f5 ,0x1ff8 }, + {0x900f6 ,0x85a8 }, + {0x900f7 ,0x1e8 }, + {0x900f8 ,0x68 }, + {0x900f9 ,0x798 }, + {0x900fa ,0x16a }, + {0x900fb ,0x78 }, + {0x900fc ,0x7a0 }, + {0x900fd ,0x16a }, + {0x900fe ,0x68 }, + {0x900ff ,0x790 }, + {0x90100 ,0x16a }, + {0x90101 ,0x8 }, + {0x90102 ,0x8b10 }, + {0x90103 ,0x168 }, + {0x90104 ,0x8 }, + {0x90105 ,0xab10 }, + {0x90106 ,0x168 }, + {0x90107 ,0xa }, + {0x90108 ,0x408 }, + {0x90109 ,0x169 }, + {0x9010a ,0x58 }, + {0x9010b ,0x0 }, + {0x9010c ,0x68 }, + {0x9010d ,0x0 }, + {0x9010e ,0x408 }, + {0x9010f ,0x169 }, + {0x90110 ,0x0 }, + {0x90111 ,0x8b10 }, + {0x90112 ,0x168 }, + {0x90113 ,0x0 }, + {0x90114 ,0xab10 }, + {0x90115 ,0x168 }, + {0x90116 ,0x0 }, + {0x90117 ,0x1d8 }, + {0x90118 ,0x169 }, + {0x90119 ,0x80 }, + {0x9011a ,0x790 }, + {0x9011b ,0x16a }, + {0x9011c ,0x18 }, + {0x9011d ,0x7aa }, + {0x9011e ,0x6a }, + {0x9011f ,0xa }, + {0x90120 ,0x0 }, + {0x90121 ,0x1e9 }, + {0x90122 ,0x8 }, + {0x90123 ,0x8080 }, + {0x90124 ,0x108 }, + {0x90125 ,0xf }, + {0x90126 ,0x408 }, + {0x90127 ,0x169 }, + {0x90128 ,0xc }, + {0x90129 ,0x0 }, + {0x9012a ,0x68 }, + {0x9012b ,0x9 }, + {0x9012c ,0x0 }, + {0x9012d ,0x1a9 }, + {0x9012e ,0x0 }, + {0x9012f ,0x408 }, + {0x90130 ,0x169 }, + {0x90131 ,0x0 }, + {0x90132 ,0x8080 }, + {0x90133 ,0x108 }, + {0x90134 ,0x8 }, + {0x90135 ,0x7aa }, + {0x90136 ,0x6a }, + {0x90137 ,0x0 }, + {0x90138 ,0x8568 }, + {0x90139 ,0x108 }, + {0x9013a ,0xb7 }, + {0x9013b ,0x790 }, + {0x9013c ,0x16a }, + {0x9013d ,0x1f }, + {0x9013e ,0x0 }, + {0x9013f ,0x68 }, + {0x90140 ,0x8 }, + {0x90141 ,0x8558 }, + {0x90142 ,0x168 }, + {0x90143 ,0xf }, + {0x90144 ,0x408 }, + {0x90145 ,0x169 }, + {0x90146 ,0xc }, + {0x90147 ,0x0 }, + {0x90148 ,0x68 }, + {0x90149 ,0x0 }, + {0x9014a ,0x408 }, + {0x9014b ,0x169 }, + {0x9014c ,0x0 }, + {0x9014d ,0x8558 }, + {0x9014e ,0x168 }, + {0x9014f ,0x8 }, + {0x90150 ,0x3c8 }, + {0x90151 ,0x1a9 }, + {0x90152 ,0x3 }, + {0x90153 ,0x370 }, + {0x90154 ,0x129 }, + {0x90155 ,0x20 }, + {0x90156 ,0x2aa }, + {0x90157 ,0x9 }, + {0x90158 ,0x0 }, + {0x90159 ,0x400 }, + {0x9015a ,0x10e }, + {0x9015b ,0x8 }, + {0x9015c ,0xe8 }, + {0x9015d ,0x109 }, + {0x9015e ,0x0 }, + {0x9015f ,0x8140 }, + {0x90160 ,0x10c }, + {0x90161 ,0x10 }, + {0x90162 ,0x8138 }, + {0x90163 ,0x10c }, + {0x90164 ,0x8 }, + {0x90165 ,0x7c8 }, + {0x90166 ,0x101 }, + {0x90167 ,0x8 }, + {0x90168 ,0x0 }, + {0x90169 ,0x8 }, + {0x9016a ,0x8 }, + {0x9016b ,0x448 }, + {0x9016c ,0x109 }, + {0x9016d ,0xf }, + {0x9016e ,0x7c0 }, + {0x9016f ,0x109 }, + {0x90170 ,0x0 }, + {0x90171 ,0xe8 }, + {0x90172 ,0x109 }, + {0x90173 ,0x47 }, + {0x90174 ,0x630 }, + {0x90175 ,0x109 }, + {0x90176 ,0x8 }, + {0x90177 ,0x618 }, + {0x90178 ,0x109 }, + {0x90179 ,0x8 }, + {0x9017a ,0xe0 }, + {0x9017b ,0x109 }, + {0x9017c ,0x0 }, + {0x9017d ,0x7c8 }, + {0x9017e ,0x109 }, + {0x9017f ,0x8 }, + {0x90180 ,0x8140 }, + {0x90181 ,0x10c }, + {0x90182 ,0x0 }, + {0x90183 ,0x1 }, + {0x90184 ,0x8 }, + {0x90185 ,0x8 }, + {0x90186 ,0x4 }, + {0x90187 ,0x8 }, + {0x90188 ,0x8 }, + {0x90189 ,0x7c8 }, + {0x9018a ,0x101 }, + {0x90006 ,0x0 }, + {0x90007 ,0x0 }, + {0x90008 ,0x8 }, + {0x90009 ,0x0 }, + {0x9000a ,0x0 }, + {0x9000b ,0x0 }, + {0xd00e7 ,0x400 }, + {0x90017 ,0x0 }, + {0x9001f ,0x2a }, + {0x90026 ,0x6a }, + {0x400d0 ,0x0 }, + {0x400d1 ,0x101 }, + {0x400d2 ,0x105 }, + {0x400d3 ,0x107 }, + {0x400d4 ,0x10f }, + {0x400d5 ,0x202 }, + {0x400d6 ,0x20a }, + {0x400d7 ,0x20b }, + {0x2003a ,0x2 }, + {0x2000b ,0x5d }, + {0x2000c ,0xbb }, + {0x2000d ,0x753 }, + {0x2000e ,0x2c }, + {0x12000b ,0xc }, + {0x12000c ,0x19 }, + {0x12000d ,0xfa }, + {0x12000e ,0x10 }, + {0x22000b ,0x3 }, + {0x22000c ,0x6 }, + {0x22000d ,0x3e }, + {0x22000e ,0x10 }, + {0x9000c ,0x0 }, + {0x9000d ,0x173 }, + {0x9000e ,0x60 }, + {0x9000f ,0x6110 }, + {0x90010 ,0x2152 }, + {0x90011 ,0xdfbd }, + {0x90012 ,0x60 }, + {0x90013 ,0x6152 }, + {0x20010 ,0x5a }, + {0x20011 ,0x3 }, + {0x40080 ,0xe0 }, + {0x40081 ,0x12 }, + {0x40082 ,0xe0 }, + {0x40083 ,0x12 }, + {0x40084 ,0xe0 }, + {0x40085 ,0x12 }, + {0x140080 ,0xe0 }, + {0x140081 ,0x12 }, + {0x140082 ,0xe0 }, + {0x140083 ,0x12 }, + {0x140084 ,0xe0 }, + {0x140085 ,0x12 }, + {0x240080 ,0xe0 }, + {0x240081 ,0x12 }, + {0x240082 ,0xe0 }, + {0x240083 ,0x12 }, + {0x240084 ,0xe0 }, + {0x240085 ,0x12 }, + {0x400fd ,0xf }, + {0x10011 ,0x1 }, + {0x10012 ,0x1 }, + {0x10013 ,0x180 }, + {0x10018 ,0x1 }, + {0x10002 ,0x6209 }, + {0x100b2 ,0x1 }, + {0x101b4 ,0x1 }, + {0x102b4 ,0x1 }, + {0x103b4 ,0x1 }, + {0x104b4 ,0x1 }, + {0x105b4 ,0x1 }, + {0x106b4 ,0x1 }, + {0x107b4 ,0x1 }, + {0x108b4 ,0x1 }, + {0x11011 ,0x1 }, + {0x11012 ,0x1 }, + {0x11013 ,0x180 }, + {0x11018 ,0x1 }, + {0x11002 ,0x6209 }, + {0x110b2 ,0x1 }, + {0x111b4 ,0x1 }, + {0x112b4 ,0x1 }, + {0x113b4 ,0x1 }, + {0x114b4 ,0x1 }, + {0x115b4 ,0x1 }, + {0x116b4 ,0x1 }, + {0x117b4 ,0x1 }, + {0x118b4 ,0x1 }, + {0x12011 ,0x1 }, + {0x12012 ,0x1 }, + {0x12013 ,0x180 }, + {0x12018 ,0x1 }, + {0x12002 ,0x6209 }, + {0x120b2 ,0x1 }, + {0x121b4 ,0x1 }, + {0x122b4 ,0x1 }, + {0x123b4 ,0x1 }, + {0x124b4 ,0x1 }, + {0x125b4 ,0x1 }, + {0x126b4 ,0x1 }, + {0x127b4 ,0x1 }, + {0x128b4 ,0x1 }, + {0x13011 ,0x1 }, + {0x13012 ,0x1 }, + {0x13013 ,0x180 }, + {0x13018 ,0x1 }, + {0x13002 ,0x6209 }, + {0x130b2 ,0x1 }, + {0x131b4 ,0x1 }, + { 0x132b4, 0x1 },board/freescale/imx8mm_evk/lpddr4_timing.c line 1935
Quoted 10 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +10
-0+ { 0x133b4, 0x1 }, + { 0x134b4, 0x1 }, + { 0x135b4, 0x1 }, + { 0x136b4, 0x1 }, + { 0x137b4, 0x1 }, + { 0x138b4, 0x1 }, + { 0x2003a, 0x2 }, + { 0xc0080, 0x2 }, + { 0xd0000, 0x1 }, +};The same as above.
Quoted 43 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +42
-0+ +struct dram_fsp_msg lpddr4_dram_fsp_msg[] = { + { +/* P0 3000mts 1D */ + .drate =3000 , + .fw_type =FW_1D_IMAGE , + .fsp_cfg = lpddr4_fsp0_cfg, + .fsp_cfg_num =ARRAY_SIZE (lpddr4_fsp0_cfg), + }, + { +/* P0 3000mts 2D */ + .drate =3000 , + .fw_type =FW_2D_IMAGE , + .fsp_cfg = lpddr4_fsp0_2d_cfg, + .fsp_cfg_num =ARRAY_SIZE (lpddr4_fsp0_2d_cfg), + }, + { +/* P1 400mts 1D */ + .drate =400 , + .fw_type =FW_1D_IMAGE , + .fsp_cfg = lpddr4_fsp1_cfg, + .fsp_cfg_num =ARRAY_SIZE (lpddr4_fsp1_cfg), + }, + { +/* P1 100mts 1D */ + .drate =100 , + .fw_type =FW_1D_IMAGE , + .fsp_cfg = lpddr4_fsp2_cfg, + .fsp_cfg_num =ARRAY_SIZE (lpddr4_fsp2_cfg), + }, +}; + +/* lpddr4 timing config params on EVK board */ +struct dram_timing_info dram_timing = { + .ddrc_cfg = lpddr4_ddrc_cfg, + .ddrc_cfg_num =ARRAY_SIZE (lpddr4_ddrc_cfg), + .ddrphy_cfg = lpddr4_ddrphy_cfg, + .ddrphy_cfg_num =ARRAY_SIZE (lpddr4_ddrphy_cfg), + .fsp_msg = lpddr4_dram_fsp_msg, + .fsp_msg_num =ARRAY_SIZE (lpddr4_dram_fsp_msg), + .ddrphy_trained_csr = lpddr4_ddrphy_trained_csr, + .ddrphy_trained_csr_num =
ARRAY_SIZE(lpddr4_ddrphy_trained_csr),board/freescale/imx8mm_evk/lpddr4_timing.c line 1979
Quoted 2 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +2
-0+ .ddrphy_pie = lpddr4_phy_pie, + .ddrphy_pie_num = ARRAY_SIZE(lpddr4_phy_pie),It would be best to get the above values calculated dynamically for this SoC.
Quoted 29 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +1
-0+};(quoted diff) +0
-0
b/board/freescale/imx8mm_evk/spl.cnew file mode 100644 index 0000000000..cf1dfc2c2aboard/freescale/imx8mm_evk/spl.c new file +22
-0@@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2019 NXP +*/ + +#include <common.h> +#include <spl.h> +#include <asm/io.h> +#include <errno.h> +#include <asm/io.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm/arch/imx8mm_pins.h> +#include <asm/arch/sys_proto.h> +#include <power/pmic.h> +#include <asm/arch/clock.h> +#include <asm/mach-imx/gpio.h> +#include <asm/mach-imx/mxc_i2c.h> +#include <fsl_esdhc.h> +#include <mmc.h> +#include <asm/arch/ddr.h> + +DECLARE_GLOBAL_DATA_PTR ;board/freescale/imx8mm_evk/spl.c line 32
Quoted 10 lines
board/freescale/imx8mm_evk/spl.c new file +10
-0+ +void spl_dram_init (void ) +{ +ddr_init (&dram_timing); +} + +#define USDHC2_CD_GPIO IMX_GPIO_NR(2, 18) +#define USDHC2_PWR_GPIO IMX_GPIO_NR(2, 19) + +#define USDHC_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS |
PAD_CTL_PUE| \Quoted 24 lines
board/freescale/imx8mm_evk/spl.c new file +5
-0+ PAD_CTL_PE | PAD_CTL_FSEL2) +#define USDHC_GPIO_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE1) + +static iomux_v3_cfg_t const usdhc3_pads[] = { + IMX8MM_PAD_NAND_WE_B_USDHC3_CLK |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_WP_B_USDHC3_CMD |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_DATA04_USDHC3_DATA0 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_DATA05_USDHC3_DATA1 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_DATA06_USDHC3_DATA2 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_DATA07_USDHC3_DATA3 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_RE_B_USDHC3_DATA4 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_CE2_B_USDHC3_DATA5 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_CE3_B_USDHC3_DATA6 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_CLE_USDHC3_DATA7 |
MUX_PAD_CTRL(USDHC_PAD_CTRL), +};board/freescale/imx8mm_evk/spl.c
Quoted 3 lines
board/freescale/imx8mm_evk/spl.c new file +3
-0+ +static iomux_v3_cfg_t const usdhc2_pads[] = { + IMX8MM_PAD_SD2_CLK_USDHC2_CLK |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c
Quoted 1 line
board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_SD2_CMD_USDHC2_CMD |
MUX_PAD_CTRL(USDHC_PAD_CTRL),Quoted 57 lines
board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_SD2_DATA0_USDHC2_DATA0 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_SD2_DATA1_USDHC2_DATA1 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_SD2_DATA2_USDHC2_DATA2 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_SD2_DATA3_USDHC2_DATA3 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_SD2_RESET_B_GPIO2_IO19 |
MUX_PAD_CTRL(USDHC_GPIO_PAD_CTRL), +};board/freescale/imx8mm_evk/spl.c new file +7
-0+ +/* +* The evk board uses DAT3 to detect CD card plugin, +* in u-boot we mux the pin to GPIO when doing board_mmc_getcd. +*/ +static iomux_v3_cfg_t const usdhc2_cd_pad = + IMX8MM_PAD_SD2_DATA3_GPIO2_IO18 |
MUX_PAD_CTRL(USDHC_GPIO_PAD_CTRL); +board/freescale/imx8mm_evk/spl.c new file +14
-0+static iomux_v3_cfg_t const usdhc2_dat3_pad = +IMX8MM_PAD_SD2_DATA3_USDHC2_DATA3 | +MUX_PAD_CTRL (USDHC_PAD_CTRL ); + +static struct fsl_esdhc_cfg usdhc_cfg[2 ] = { + {USDHC2_BASE_ADDR ,0 ,1 }, + {USDHC3_BASE_ADDR ,0 ,1 }, +}; + +int board_mmc_init (bd_t *bis) +{ +int i, ret; +/* +* According to the board_mmc_init() the following map is done:
board/freescale/imx8mm_evk/spl.c new file +8
-0+* (U-Boot device node) (Physical Port) +* mmc0 USDHC1 +* mmc1 USDHC2 +*/ +for (i =0 ; i <CONFIG_SYS_FSL_USDHC_NUM ; i++) { +switch (i) { +case 0 : + usdhc_cfg[0].sdhc_clk =
mxc_get_clock(MXC_ESDHC2_CLK);board/freescale/imx8mm_evk/spl.c new file +2
-0+ imx_iomux_v3_setup_multiple_pads(usdhc2_pads, +
ARRAY_SIZE(usdhc2_pads));board/freescale/imx8mm_evk/spl.c new file +1
-0+ gpio_request(USDHC2_PWR_GPIO,"
usdhc2_reset");board/freescale/imx8mm_evk/spl.c new file +6
-0+gpio_direction_output (USDHC2_PWR_GPIO ,0 ); +udelay (500 ); +gpio_direction_output (USDHC2_PWR_GPIO ,1 ); +break ; +case 1 : + usdhc_cfg[1].sdhc_clk =
mxc_get_clock(MXC_ESDHC3_CLK);board/freescale/imx8mm_evk/spl.c new file +2
-0+ imx_iomux_v3_setup_multiple_pads(usdhc3_pads, +
ARRAY_SIZE(usdhc3_pads));board/freescale/imx8mm_evk/spl.c
Quoted 1 line
board/freescale/imx8mm_evk/spl.c new file +1
-0+break ;It would be best if you could enable DM/DTS in SPL too from the outset (and share the SPL size).
Do you have any timeline for converting SPL to DM/DTS?
configs/imx8mm_evk_defconfig
Quoted 110 lines
board/freescale/imx8mm_evk/spl.c new file +2
-0+default : + printf("USDHC controllers %d not supported\n", i + 1);
board/freescale/imx8mm_evk/spl.c new file +14
-0+return -EINVAL ; + } + + ret =fsl_esdhc_initialize (bis, &usdhc_cfg[i]); +if (ret) +return ret; + } + +return 0 ; +} + +int board_mmc_getcd (struct mmc *mmc) +{Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
*)mmc->priv;
board/freescale/imx8mm_evk/spl.c new file +72
-0Lines of this file are not shown. View the raw message.
(quoted diff) +0
-0The rest of this diff is not shown. View the raw message.
b/configs/imx8mm_evk_defconfig new file mode 100644 index 0000000000..6110f23e38
configs/imx8mm_evk_defconfig new file +13
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m /imximage.cfg,SPL_TEXT_BASE=0x7E1000"
configs/imx8mm_evk_defconfig
Quoted 20 lines
configs/imx8mm_evk_defconfig new file +20
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Here you enable the
DM_ETH, but the welcome u-boot info says:"Net: No ethernet found."
include/configs/imx8mm_evk.h
Quoted 35 lines
configs/imx8mm_evk_defconfig new file +7
-0Lines of this file are not shown. View the raw message.
(quoted diff) +0
-0The rest of this diff is not shown. View the raw message.
b/include/configs/imx8mm_evk.hnew file mode 100644 index 0000000000..f944308757include/configs/imx8mm_evk.h new file +22
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR*Quoted 10 lines
512) +
include/configs/imx8mm_evk.h new file +6
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
CONFIG_SPL_LDSCRIPT"arch/arm/cpu/armv8/u-boot-spl.lds"
+#defineCONFIG_SPL_STACK0x91fff0+#defineCONFIG_SPL_LIBCOMMON_SUPPORT+#define
CONFIG_SPL_LIBGENERIC_SUPPORTQuoted 10 lines
include/configs/imx8mm_evk.h new file +8
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
used before
GD_FLG_FULL_MALLOC_INITset */ +
+#defineCONFIG_SPL_ABORT_ON_RAW_IMAGE/* For RAW image gives aerror
include/configs/imx8mm_evk.h
Quoted 4 lines
info not panic */ +
include/configs/imx8mm_evk.h new file +3
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Why do you need to undef those config options?
include/configs/imx8mm_evk.h
Quoted 20 lines
include/configs/imx8mm_evk.h new file +20
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
There seems to be some issue with inheritance, as you need to undef those values manually.
Why is it needed?
include/configs/imx8mm_evk.h
Quoted 124 lines
include/configs/imx8mm_evk.h new file +27
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
earlycon=ec_imx6q,0x30890000,115200\0" \
include/configs/imx8mm_evk.h new file +11
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
root=${mmcroot}\0 " \
include/configs/imx8mm_evk.h new file +1
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
${script};\0" \
include/configs/imx8mm_evk.h new file +3
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
${image}\0" \
include/configs/imx8mm_evk.h new file +1
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
${fdt_file}\0" \
include/configs/imx8mm_evk.h new file +3
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
try; then " \
include/configs/imx8mm_evk.h new file +20
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
try; then " \
include/configs/imx8mm_evk.h new file +1
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
" \
include/configs/imx8mm_evk.h new file +39
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
USDHC2 */ +
include/configs/imx8mm_evk.h new file +6
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
*/ +
include/configs/imx8mm_evk.h new file +2
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
(
CONFIG_SYS_MEMTEST_START+include/configs/imx8mm_evk.h
Quoted 35 lines
(
PHYS_SDRAM_SIZE>> 1)) +include/configs/imx8mm_evk.h new file +13
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
16) +
include/configs/imx8mm_evk.h new file +20
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Some of those values are (SYS_I2C_*,
MXC_OCOTP, FSL_*) are already supported byKconfig. Please useKconfiginstead.include/configs/imx8mm_evk.h
Quoted 4 lines
include/configs/imx8mm_evk.h new file +4
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
lukma at denx.de
Part of the diff is not shown here. View the raw message.
PATCH 20/20 imx: add i.MX8MM EVK board support
Hi Peng,
Quoted 33 lines
Quoted 33 lines
-----Original Message-----
From: Lukasz Majewski [mailto:lukma at denx.de]
Sent: 2019年1月30日 7:19
To: Peng Fan <[email protected]>
Cc: sbabic at denx.de; Fabio Estevam <[email protected]>; dl-uboot-imx <[email protected]>; u-boot at lists.denx.de
Subject: Re: [U-Boot] [PATCH 20/20] imx: add i.MX8MM EVK board supportHi Peng,
Quoted 21 lines
Add i.MX8MM EVK board support.
Add board and SoC dts
Add ddr training code
support SD/MMC/GPIO/PINCTRL/UARTU-Boot SPL 2019.01-00148-g1179cffe66 (Jan 28 2019 - 17:37:34 +0800) Normal Boot
Trying to boot from MMC1U-Boot 2019.01-00148-g1179cffe66 (Jan 28 2019 - 17:37:34 +0800)
CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz Reset cause: POR Model: NXP i.MX8MM EVK board DRAM: 2 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 In: serial Out: serial Err: serialDM
Quoted 4 lines
Quoted 2 lines
You set/adjust latter in the code the fec network driver. Why it is not found?
I dropped network support, could add it in V2.
From the patch it seems like the ETH is fully supported, at lease from the source code point of view.
Quoted 11 lines
Quoted 3 lines
Could you also share the output of "dm tree" command?
Sure.
Quoted 3 lines
I suppose/guess that this board shall support as much as possible of the DT/DM conversions?
Ok.
And I would like to emphasize the need of DDR training code (as a functions, not pair of offset and value).
Are you able to provide such code in the next version of the patch?
Quoted 3,882 lines
Regards,
Peng.Quoted 3,878 lines
Quoted 1,075 lines
Hit any key to stop autoboot: 2
Signed-off-by Peng Fan <[email protected]>--- arch/arm/dts/fsl-imx8mm-evk.dts | 203 +++ arch/arm/dts/fsl-imx8mm.dtsi | 586 ++++++++ arch/arm/mach-imx/imx8m/Kconfig | 7 + board/freescale/imx8mm_evk/Kconfig | 12 + board/freescale/imx8mm_evk/MAINTAINERS | 6 + board/freescale/imx8mm_evk/Makefile | 12 + board/freescale/imx8mm_evk/imx8mm_evk.c | 144 ++ board/freescale/imx8mm_evk/lpddr4_timing.c | 1980 ++++++++++++++++++++++++++++ board/freescale/imx8mm_evk/spl.c | 187 +++ configs/imx8mm_evk_defconfig | 41 + include/configs/imx8mm_evk.h | 221 ++++ 11 fileschanged, 3399 insertions(+) create mode 100644
arch/arm/dts/fsl-imx8mm-evk.dtscreate mode 100644arch/arm/dts/fsl-imx8mm.dtsicreate mode 100644 board/freescale/imx8mm_evk/Kconfig create mode 100644 board/freescale/imx8mm_evk/MAINTAINERS create mode 100644 board/freescale/imx8mm_evk/Makefile create mode 100644board/freescale/imx8mm_evk/imx8mm_evk.ccreate mode 100644board/freescale/imx8mm_evk/lpddr4_timing.ccreate mode 100644board/freescale/imx8mm_evk/spl.ccreate mode 100644 configs/imx8mm_evk_defconfig create mode 100644include/configs/imx8mm_evk.h(quoted diff) +0
-0
b/arch/arm/dts/fsl-imx8mm-evk.dtsnew file mode 100644 index 0000000000..df409eca47arch/arm/dts/fsl-imx8mm-evk.dts new file +41
-0@@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include "fsl-imx8mm.dtsi" + +/ { + model = "NXP i.MX8MM EVK board"; + compatible = "fsl,imx8mm-evk", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + off-on-delay = <20000>; + enable-active-high; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + + imx8mm-evk { + pinctrl_fec1: fec1grp { + fsl,pins = < +
MX8MM_IOMUXC_ENET_MDC_ENET1_MDC0x3
+MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO0x3
+MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD30x1f
+MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD20x1f
+MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD10x1f
+MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD00x1f
+MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD30x91
+MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD20x91
+MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD10x91
+MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD00x91
+MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC0x1f
+MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC0x91
+MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL0x91
+MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL0x1f
+MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO220x19arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < +
MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO160x19arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < +
MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX0x140
+MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX0x140arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < +
MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO150x1c4
+MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO190x41arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < +
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK0x190
+MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD0x1d0
+MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA00x1d0
+MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA10x1d0
+MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA20x1d0
+MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA30x1d0
+MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT0x1d0arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < +
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK0x194
+MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD0x1d4
+MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA00x1d4
+MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA10x1d4
+MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA20x1d4
+MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA30x1d4
+MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT0x1d0arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < +
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK0x196
+MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD0x1d6
+MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA00x1d6
+MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA10x1d6
+MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA20x1d6
+MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA30x1d6
+MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT0x1d0arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < +
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK0x190
+MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD0x1d0
+MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA00x1d0
+MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA10x1d0
+MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA20x1d0
+MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA30x1d0
+MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA40x1d0
+MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA50x1d0
+MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA60x1d0
+MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA70x1d0
+MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE0x190arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < +
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK0x194
+MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD0x1d4
+MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA00x1d4
+MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA10x1d4
+MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA20x1d4
+MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA30x1d4
+MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA40x1d4
+MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA50x1d4
+MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA60x1d4
+MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA70x1d4
+MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE0x194arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < +
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK0x196
+MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD0x1d6
+MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA00x1d6
+MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA10x1d6
+MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA20x1d6
+MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA30x1d6
+MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA40x1d6
+MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA50x1d6
+MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA60x1d6
+MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA70x1d6
+MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE0x196arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < +
MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B0xc6arch/arm/dts/fsl-imx8mm-evk.dts new file +13
-0+ >; + }; + }; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz","
state_200mhz";arch/arm/dts/fsl-imx8mm-evk.dts new file +2
-0+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>,<
&pinctrl_usdhc2_gpio>;arch/arm/dts/fsl-imx8mm-evk.dts new file +1
-0+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>,<
&pinctrl_usdhc2_gpio>;arch/arm/dts/fsl-imx8mm-evk.dts new file +8
-0+ cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz","
state_200mhz";arch/arm/dts/fsl-imx8mm-evk.dts new file +14
-0+ pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +};(quoted diff) +0
-0
b/arch/arm/dts/fsl-imx8mm.dtsinew file mode 100644 index 0000000000..8a808f856darch/arm/dts/fsl-imx8mm.dtsi new file +143
-0@@ -0,0 +1,586 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2017-2019 NXP + */ + +#include <dt-bindings/clock/imx8mm-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/pins-imx8mm.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "fsl,imx8mm"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + A53_0: cpu at 0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_1: cpu at 1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_2: cpu at 2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_3: cpu at 3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + memory at 40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc_32k: clock at 0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc_32k"; + }; + + osc_24m: clock at 1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc_24m"; + }; + + clk_ext1: clock at 2 { + compatible = "fixed-clock"; + reg = <3>; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext1"; + }; + + clk_ext2: clock at 3 { + compatible = "fixed-clock"; + reg = <4>; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext2"; + }; + + clk_ext3: clock at 4 { + compatible = "fixed-clock"; + reg = <5>; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext3"; + }; + + clk_ext4: clock at 5 { + compatible = "fixed-clock"; + reg = <6>; + #clock-cells = <0>; + clock-frequency= <133000000>; + clock-output-names = "clk_ext4"; + }; + }; + + gic: interrupt-controller at 38800000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */ + <0x0 0x38880000 0 0xC0000>; /* GICR(
RD_base+SGI_base) */arch/arm/dts/fsl-imx8mm.dtsi new file +14
-0+ #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 + (GIC_CPU_MASK_SIMPLE(6) |
IRQ_TYPE_LEVEL_HIGH)>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupt-affinity = <&A53_0>, <&A53_1>,<
&A53_2>, <&A53_3>;arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6)|
IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6)|
IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6)|
IRQ_TYPE_LEVEL_LOW)>, /* Virtual */arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6)|
IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */arch/arm/dts/fsl-imx8mm.dtsi new file +12
-0+ clock-frequency = <8000000>; + arm,no-tick-in-suspend; + }; + + soc at 0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + aips1: bus at 30000000 { + compatible = "fsl,aips-bus","simple-bus";
arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x30000000 0x0 0x400000>; + ranges; + + gpio1: gpio at 30200000 { + compatible = "fsl,imx8mm-gpio","fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30200000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 64
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 65
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio at 30210000 { + compatible = "fsl,imx8mm-gpio","fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30210000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 66
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 67
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio at 30220000 { + compatible = "fsl,imx8mm-gpio","fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30220000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 68
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 69
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio at 30230000 { + compatible = "fsl,imx8mm-gpio","fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30230000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 70
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 71
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio at 30240000 { + compatible = "fsl,imx8mm-gpio","fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30240000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 72
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 73
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +10
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wdog1: wdog at 30280000 { + compatible = "fsl,imx21-wdt"; + reg = <0 0x30280000 0 0x10000>; + interrupts = <GIC_SPI 78
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_WDOG1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ status = "disabled"; + }; + + wdog2: wdog at 30290000 { + compatible = "fsl,imx21-wdt"; + reg = <0 0x30290000 0 0x10000>; + interrupts = <GIC_SPI 79
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_WDOG2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ status = "disabled"; + }; + + wdog3: wdog at 302a0000 { + compatible = "fsl,imx21-wdt"; + reg = <0 0x302a0000 0 0x10000>; + interrupts = <GIC_SPI 10
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_WDOG3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ status = "disabled"; + }; + + sdma2: dma-controller at 302c0000 { + compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x302c0000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 103
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_SDMA2_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_SDMA2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +3
-0+ clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name ="imx/sdma/sdma-imx7d.bin";
arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ fsl,ratio-1-1; + status = "okay"; + }; + + sdma3: dma-controller at 302b0000 { + compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x302b0000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 34
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_SDMA3_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ <&clk IMX8MM_CLK_SDMA3_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name ="imx/sdma/sdma-imx7d.bin";
arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ fsl,ratio-1-1; + status = "okay"; + }; + + iomuxc: pinctrl at 30330000 { + compatible = "fsl,imx8mm-iomuxc"; + reg = <0x0 0x30330000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ }; + + gpr: iomuxc-gpr at 30340000 { + compatible ="fsl,imx8mm-iomuxc-gpr", "syscon";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30340000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ }; + + ocotp: ocotp-ctrl at 30350000 { + compatible = "fsl,imx8mq-ocotp","fsl,imx7d-ocotp", "syscon";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0 0x30350000 0 0x10000>; + clocks = <&clk
IMX8MM_CLK_OCOTP_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ /* For nvmem subnodes */ + #address-cells = <1>; + #size-cells = <1>; + }; + + anatop: anatop at 30360000 { + compatible = "fsl,imx8mm-anatop","syscon", "simple-bus";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30360000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ }; + + snvs: snvs at 30370000 { + compatible ="fsl,sec-v4.0-mon","syscon", "simple-mfd";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30370000 0x0
0x10000>; +arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ snvs_rtc: snvs-rtc-lp{ + compatible ="fsl,sec-v4.0-mon-rtc-lp";
arch/arm/dts/fsl-imx8mm.dtsi new file +3
-0+ regmap =<&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI19
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI20
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ }; + + snvs_pwrkey: snvs-powerkey { + compatible ="fsl,sec-v4.0-pwrkey";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ regmap = <&snvs>; + interrupts = <GIC_SPI 4
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ linux,keycode =<
KEY_POWER>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ wakeup-source; + }; + }; + + clk: clock-controller at 30380000 { + compatible = "fsl,imx8mm-ccm"; + reg = <0x0 0x30380000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>,<
&clk_ext1>, <&clk_ext2>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk_ext3>,<
&clk_ext4>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clock-names = "osc_32k","
osc_24m", "clk_ext1", "clk_ext2",arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ "clk_ext3","
clk_ext4";arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ }; + + src: src at 30390000 { + compatible = "fsl,imx8mm-src","syscon";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30390000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 89
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ #reset-cells = <1>; + }; + + gpc: gpc at 303a0000 { + compatible = "fsl,imx8mm-gpc","syscon";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x303a0000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ interrupt-controller; + interrupts = <GIC_SPI 87
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ #interrupt-cells = <3>; + }; + }; + + aips2: bus at 30400000 { + compatible = "fsl,aips-bus","simple-bus";
arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x30400000 0x0 0x400000>; + ranges; + + pwm1: pwm at 30660000 { + compatible = "fsl,imx8mm-pwm","fsl,imx27-pwm";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30660000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 81
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_PWM1_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_PWM1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm at 30670000 { + compatible = "fsl,imx8mm-pwm","fsl,imx27-pwm";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30670000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 82
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_PWM2_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_PWM2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm at 30680000 { + compatible = "fsl,imx8mm-pwm","fsl,imx27-pwm";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30680000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 83
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_PWM3_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_PWM3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm at 30690000 { + compatible = "fsl,imx8mm-pwm","fsl,imx27-pwm";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30690000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 84
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_PWM4_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_PWM4_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + }; + + aips3: bus at 30800000 { + compatible = "fsl,aips-bus","simple-bus";
arch/arm/dts/fsl-imx8mm.dtsi new file +9
-0+ #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x30800000 0x0 0x400000>; + ranges; + + ecspi1: ecspi at 30820000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-ecspi","fsl,imx51-ecspi";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30820000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 31
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_ECSPI1_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_ECSPI1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: ecspi at 30830000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-ecspi","fsl,imx51-ecspi";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30830000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 32
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_ECSPI2_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_ECSPI2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: ecspi at 30840000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-ecspi","fsl,imx51-ecspi";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30840000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 33
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_ECSPI3_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_ECSPI3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial at 30860000 { + compatible = "fsl,imx8mm-uart", + "fsl,imx6q-uart","fsl,imx21-uart";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30860000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 26
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_UART1_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_UART1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial at 30880000 { + compatible = "fsl,imx8mm-uart", + "fsl,imx6q-uart","fsl,imx21-uart";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30880000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 28
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_UART3_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_UART3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial at 30890000 { + compatible = "fsl,imx8mm-uart", + "fsl,imx6q-uart","fsl,imx21-uart";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30890000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 27
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_UART2_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_UART2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c1: i2c at 30a20000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-i2c","fsl,imx21-i2c";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30a20000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 35
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_I2C1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ status = "disabled"; + }; + + i2c2: i2c at 30a30000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-i2c","fsl,imx21-i2c";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30a30000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 36
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_I2C2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ status = "disabled"; + }; + + i2c3: i2c at 30a40000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-i2c","fsl,imx21-i2c";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30a40000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 37
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_I2C3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ status = "disabled"; + }; + + i2c4: i2c at 30a50000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-i2c","fsl,imx21-i2c";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30a50000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 38
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_I2C4_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ status = "disabled"; + }; + + uart4: serial at 30a60000 { + compatible = "fsl,imx8mq-uart", + "fsl,imx6q-uart","fsl,imx21-uart";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30a60000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 29
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_UART4_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_UART4_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + usdhc1: mmc at 30b40000 { + compatible = "fsl,imx8mq-usdhc","fsl,imx7d-usdhc";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30b40000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 22
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk
IMX8MM_CLK_NAND_USDHC_BUS>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_USDHC1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clock-names = "ipg", "ahb","per";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ assigned-clocks = <&clk
IMX8MM_CLK_USDHC1>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ assigned-clock-rates =<400000000>;
arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: mmc at 30b50000 { + compatible = "fsl,imx8mq-usdhc","fsl,imx7d-usdhc";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30b50000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 23
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk
IMX8MM_CLK_NAND_USDHC_BUS>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_USDHC2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clock-names = "ipg", "ahb","per";
arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: mmc at 30b60000 { + compatible = "fsl,imx8mq-usdhc","fsl,imx7d-usdhc";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30b60000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 24
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk
IMX8MM_CLK_NAND_USDHC_BUS>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_USDHC3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clock-names = "ipg", "ahb","per";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ assigned-clocks = <&clk
IMX8MM_CLK_USDHC3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ assigned-clock-rates =<400000000>;
arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + }; + }; +};(quoted diff) +0
-0Quoted 1 line
b/arch/arm/mach-imx/imx8m/Kconfig index
35c978e863..f520075875100644
arch/arm/mach-imx/imx8m/Kconfig config TARGET_IMX8MQ_EVK · line 31
Quoted 11 lines
arch/arm/mach-imx/imx8m/Kconfig +5
-0@@ -24,8 +24,15 @@ config TARGET_IMX8MQ_EVK select IMX8MQ select IMX8M_LPDDR4 +config TARGET_IMX8MM_EVK + bool "imx8mm LPDDR4 EVK board" + select IMX8MM + select SUPPORT_SPL + select IMX8M_LPDDR4Here you shall put the select DM_{UART,USDHC, etc}
Quoted 89 lines
arch/arm/mach-imx/imx8m/Kconfig +2
-0+ endchoice source "board/freescale/imx8mq_evk/Kconfig" +source "board/freescale/imx8mm_evk/Kconfig" endif(quoted diff) +0
-0b/board/freescale/imx8mm_evk/Kconfig new file mode 100644 index 0000000000..299691a619
board/freescale/imx8mm_evk/Kconfig new file +12
-0@@ -0,0 +1,12 @@ +if TARGET_IMX8MM_EVK + +config SYS_BOARD + default "imx8mm_evk" + +config SYS_VENDOR + default "freescale" + +config SYS_CONFIG_NAME + default "imx8mm_evk" + +endif(quoted diff) +0
-0b/board/freescale/imx8mm_evk/MAINTAINERS new file mode 100644 index 0000000000..b031bb0674
board/freescale/imx8mm_evk/MAINTAINERS new file +6
-0@@ -0,0 +1,6 @@ +i.MX8MM EVK BOARD +M: Peng Fan <[email protected]> +S: Maintained +F: board/freescale/imx8mm_evk/ +F: include/configs/imx8mm_evk.h +F: configs/imx8mm_evk_defconfig(quoted diff) +0
-0b/board/freescale/imx8mm_evk/Makefile new file mode 100644 index 0000000000..1db7b62caf
board/freescale/imx8mm_evk/Makefile new file +12
-0@@ -0,0 +1,12 @@ +# +# Copyright 2018 NXP +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += imx8mm_evk.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o +endif(quoted diff) +0
-0
b/board/freescale/imx8mm_evk/imx8mm_evk.cnew file mode 100644 index 0000000000..a681aca04dboard/freescale/imx8mm_evk/imx8mm_evk.c new file +27
-0@@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2018 NXP +*/ + +#include <common.h> +#include <malloc.h> +#include <errno.h> +#include <asm/io.h> +#include <miiphy.h> +#include <netdev.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm-generic/gpio.h> +#include <fsl_esdhc.h> +#include <mmc.h> +#include <asm/arch/imx8mm_pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-imx/gpio.h> +#include <asm/mach-imx/mxc_i2c.h> +#include <asm/arch/clock.h> +#include <spl.h> +#include <asm/mach-imx/dma.h> + +DECLARE_GLOBAL_DATA_PTR ; + +#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) +#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE |
PAD_CTL_PUE|PAD_CTL_PE) +board/freescale/imx8mm_evk/imx8mm_evk.c
Quoted 2 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +2
-0+static iomux_v3_cfg_t const uart_pads[] = { + IMX8MM_PAD_UART2_RXD_UART2_RX |
MUX_PAD_CTRL(UART_PAD_CTRL),board/freescale/imx8mm_evk/imx8mm_evk.c
Quoted 1 line
board/freescale/imx8mm_evk/imx8mm_evk.c new file +1
-0+ IMX8MM_PAD_UART2_TXD_UART2_TX |
MUX_PAD_CTRL(UART_PAD_CTRL),Quoted 30 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +4
-0+}; + +static iomux_v3_cfg_t const wdog_pads[] = { + IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B |
MUX_PAD_CTRL(WDOG_PAD_CTRL), +};board/freescale/imx8mm_evk/imx8mm_evk.c new file +4
-0+ +int board_early_init_f (void ) +{ + struct wdog_regs *wdog = (struct wdog_regs*)WDOG1_BASE_ADDR; +
board/freescale/imx8mm_evk/imx8mm_evk.c new file +1
-0+ imx_iomux_v3_setup_multiple_pads(wdog_pads,
ARRAY_SIZE(wdog_pads)); +board/freescale/imx8mm_evk/imx8mm_evk.c new file +3
-0+set_wdog_reset (wdog); + + imx_iomux_v3_setup_multiple_pads(uart_pads,
ARRAY_SIZE(uart_pads)); +board/freescale/imx8mm_evk/imx8mm_evk.c new file +14
-0+return 0 ; +} + +#ifdef CONFIG_BOARD_POSTCLK_INIT +int board_postclk_init (void ) +{ +/* TODO */ +return 0 ; +} +#endif + +int dram_init (void ) +{ +/* rom_pointer[1] contains the size of TEE occupies */ board/freescale/imx8mm_evk/imx8mm_evk.c line 71
Quoted 10 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +10
-0+if (rom_pointer[1 ]) + gd->ram_size =PHYS_SDRAM_SIZE - rom_pointer[1 ]; +else + gd->ram_size =PHYS_SDRAM_SIZE ; + +return 0 ; +} + +#ifdef CONFIG_OF_BOARD_SETUP +int ft_board_setup (void *blob,bd_t *bd)^^^ - fdt_board_setup ?board/freescale/imx8mm_evk/imx8mm_evk.c
Quoted 9 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +9
-0+{ +return 0 ; +} +#endif + +#ifdef CONFIG_FEC_MXC +#define FEC_RST_PAD IMX_GPIO_NR(4, 22) +static iomux_v3_cfg_t const fec1_rst_pads[] = { + IMX8MM_PAD_SAI2_RXC_GPIO4_IO22 |
MUX_PAD_CTRL(NO_PAD_CTRL),This shall be done with
fsl_fec.cDM driver - there is support for adding reset pin (to dts).board/freescale/imx8mm_evk/imx8mm_evk.c line 92
Quoted 12 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +6
-0+}; + +static void setup_iomux_fec (void ) +{ + imx_iomux_v3_setup_multiple_pads(fec1_rst_pads, +
ARRAY_SIZE(fec1_rst_pads)); +board/freescale/imx8mm_evk/imx8mm_evk.c new file +5
-0+gpio_request (FEC_RST_PAD ,"fec1_rst" ); +gpio_direction_output (FEC_RST_PAD ,0 ); +udelay (500 ); +gpio_direction_output (FEC_RST_PAD ,1 ); +}This shall be replaced with DM/DTS of the
fsl_fec.cdriver. Please also note that there are (at least on imx6q) some timing issues when we move the code to DM/DTS (some delay is needed).Quoted 21 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +5
-0+ +static int setup_fec (void ) +{ + struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs + = (struct iomuxc_gpr_base_regs*)IOMUXC_GPR_BASE_ADDR; +
board/freescale/imx8mm_evk/imx8mm_evk.c new file +3
-0+setup_iomux_fec (); + +/* Use 125M anatop REF_CLK1 for ENET1, not from external */
board/freescale/imx8mm_evk/imx8mm_evk.c new file +2
-0+ clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], +
IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_SHIFT, 0);board/freescale/imx8mm_evk/imx8mm_evk.c new file +6
-0+return set_clk_enet (ENET_125MHZ ); +} + +int board_phy_config (struct phy_device *phydev) +{ +/* enable rgmii rxc skew and phy mode select to RGMII copper */
board/freescale/imx8mm_evk/imx8mm_evk.c new file +1
-0+phy_write (phydev,MDIO_DEVAD_NONE ,0x1d ,0x1f );board/freescale/imx8mm_evk/imx8mm_evk.c line 120
Quoted 10 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +10
-0+phy_write (phydev,MDIO_DEVAD_NONE ,0x1e ,0x8 ); + +phy_write (phydev,MDIO_DEVAD_NONE ,0x1d ,0x00 ); +phy_write (phydev,MDIO_DEVAD_NONE ,0x1e ,0x82ee ); +phy_write (phydev,MDIO_DEVAD_NONE ,0x1d ,0x05 ); +phy_write (phydev,MDIO_DEVAD_NONE ,0x1e ,0x100 ); + +if (phydev->drv->config) + phydev->drv->config (phydev); +return 0 ;Which PHY do you use? E.g. KSZ... support passing those values via DTS.
Quoted 30 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +24
-0+} +#endif + +int board_init (void ) +{ +#ifdef CONFIG_FEC_MXC +setup_fec (); +#endif +return 0 ; +} + +int board_mmc_get_env_dev (int devno) +{ +return devno -1 ; +} + +int board_late_init (void ) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +env_set ("board_name" ,"EVK" ); +env_set ("board_rev" ,"iMX8MM" ); +#endif +return 0 ; +}(quoted diff) +0
-0
b/board/freescale/imx8mm_evk/lpddr4_timing.cnew file mode 100644 index 0000000000..4bade5bf74board/freescale/imx8mm_evk/lpddr4_timing.c line 3
Quoted 3 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +3
-0@@ -0,0 +1,1980 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2018 NXP Author is missing.
Quoted 306 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +306
-0+*/ + +#include <linux/kernel.h> +#include <common.h> +#include <asm/arch/ddr.h> +#include <asm/arch/lpddr4_define.h> + +struct dram_cfg_param lpddr4_ddrc_cfg[] = { +/* Start to config, default 3200mbps */ + {DDRC_DBG1 (0 ),0x00000001 }, + {DDRC_PWRCTL (0 ),0x00000001 }, + {DDRC_MSTR (0 ),0xa1080020 }, + {DDRC_RFSHTMG (0 ),0x005b00d2 }, + {DDRC_INIT0 (0 ),0xC003061B }, + {DDRC_INIT1 (0 ),0x009D0000 }, + {DDRC_INIT3 (0 ),0x00D4002D }, + {DDRC_INIT4 (0 ), (LPDDR4_MR3 <<16 ) |0x0000 }, + {DDRC_INIT6 (0 ),0x0066004a }, + {DDRC_INIT7 (0 ),0x0006004a }, + + {DDRC_DRAMTMG0 (0 ),0x1A201B22 }, + {DDRC_DRAMTMG1 (0 ),0x00060633 }, + {DDRC_DRAMTMG3 (0 ),0x00C0C000 }, + {DDRC_DRAMTMG4 (0 ),0x0F04080F }, + {DDRC_DRAMTMG5 (0 ),0x02040C0C }, + {DDRC_DRAMTMG6 (0 ),0x01010007 }, + {DDRC_DRAMTMG7 (0 ),0x00000401 }, + {DDRC_DRAMTMG12 (0 ),0x00020600 }, + {DDRC_DRAMTMG13 (0 ),0x0C100002 }, + {DDRC_DRAMTMG14 (0 ),0x000000E6 }, + {DDRC_DRAMTMG17 (0 ),0x00A00050 }, + + {DDRC_ZQCTL0 (0 ),0x03200018 }, + {DDRC_ZQCTL1 (0 ),0x028061A8 }, + {DDRC_ZQCTL2 (0 ),0x00000000 }, + + {DDRC_DFITMG0 (0 ),0x0497820A }, + {DDRC_DFITMG2 (0 ),0x0000170A }, + {DDRC_DRAMTMG2 (0 ),0x070E171a }, + {DDRC_DBICTL (0 ),0x00000001 }, + + {DDRC_DFITMG1 (0 ),0x00080303 }, + {DDRC_DFIUPD0 (0 ),0xE0400018 }, + {DDRC_DFIUPD1 (0 ),0x00DF00E4 }, + {DDRC_DFIUPD2 (0 ),0x80000000 }, + {DDRC_DFIMISC (0 ),0x00000011 }, + + {DDRC_DFIPHYMSTR (0 ),0x00000000 }, + {DDRC_RANKCTL (0 ),0x00000c99 }, + +/* address mapping */ + {DDRC_ADDRMAP0 (0 ),0x0000001f }, + {DDRC_ADDRMAP1 (0 ),0x00080808 }, + {DDRC_ADDRMAP2 (0 ),0x00000000 }, + {DDRC_ADDRMAP3 (0 ),0x00000000 }, + {DDRC_ADDRMAP4 (0 ),0x00001f1f }, + {DDRC_ADDRMAP5 (0 ),0x07070707 }, + {DDRC_ADDRMAP6 (0 ),0x07070707 }, + {DDRC_ADDRMAP7 (0 ),0x00000f0f }, + +/* performance setting */ + {DDRC_SCHED (0 ),0x29001701 }, + {DDRC_SCHED1 (0 ),0x0000002c }, + {DDRC_PERFHPR1 (0 ),0x04000030 }, + {DDRC_PERFLPR1 (0 ),0x900093e7 }, + {DDRC_PERFWR1 (0 ),0x20005574 }, + {DDRC_PCCFG (0 ),0x00000111 }, + {DDRC_PCFGW_0 (0 ),0x000072ff }, + {DDRC_PCFGQOS0_0 (0 ),0x02100e07 }, + {DDRC_PCFGQOS1_0 (0 ),0x00620096 }, + {DDRC_PCFGWQOS0_0 (0 ),0x01100e07 }, + {DDRC_PCFGWQOS1_0 (0 ),0x00c8012c }, + +/* frequency P1&P2 */ +/* Frequency 1: 400mbps */ + {DDRC_FREQ1_DRAMTMG0 (0 ),0x0d0b010c }, + {DDRC_FREQ1_DRAMTMG1 (0 ),0x00030410 }, + {DDRC_FREQ1_DRAMTMG2 (0 ),0x0203090c }, + {DDRC_FREQ1_DRAMTMG3 (0 ),0x00505006 }, + {DDRC_FREQ1_DRAMTMG4 (0 ),0x05040305 }, + {DDRC_FREQ1_DRAMTMG5 (0 ),0x0d0e0504 }, + {DDRC_FREQ1_DRAMTMG6 (0 ),0x0a060004 }, + {DDRC_FREQ1_DRAMTMG7 (0 ),0x0000090e }, + {DDRC_FREQ1_DRAMTMG14 (0 ),0x00000032 }, + {DDRC_FREQ1_DRAMTMG15 (0 ),0x00000000 }, + {DDRC_FREQ1_DRAMTMG17 (0 ),0x0036001b }, + {DDRC_FREQ1_DERATEINT (0 ),0x7e9fbeb1 }, + {DDRC_FREQ1_DFITMG0 (0 ),0x03818200 }, + {DDRC_FREQ1_DFITMG2 (0 ),0x00000000 }, + {DDRC_FREQ1_RFSHTMG (0 ),0x000C001c }, + {DDRC_FREQ1_INIT3 (0 ),0x00840000 }, + {DDRC_FREQ1_INIT4 (0 ),0x00310000 }, + {DDRC_FREQ1_INIT6 (0 ),0x0066004a }, + {DDRC_FREQ1_INIT7 (0 ),0x0006004a }, + +/* Frequency 2: 100mbps */ + {DDRC_FREQ2_DRAMTMG0 (0 ),0x0d0b010c }, + {DDRC_FREQ2_DRAMTMG1 (0 ),0x00030410 }, + {DDRC_FREQ2_DRAMTMG2 (0 ),0x0203090c }, + {DDRC_FREQ2_DRAMTMG3 (0 ),0x00505006 }, + {DDRC_FREQ2_DRAMTMG4 (0 ),0x05040305 }, + {DDRC_FREQ2_DRAMTMG5 (0 ),0x0d0e0504 }, + {DDRC_FREQ2_DRAMTMG6 (0 ),0x0a060004 }, + {DDRC_FREQ2_DRAMTMG7 (0 ),0x0000090e }, + {DDRC_FREQ2_DRAMTMG14 (0 ),0x00000032 }, + {DDRC_FREQ2_DRAMTMG17 (0 ),0x0036001b }, + {DDRC_FREQ2_DERATEINT (0 ),0x7e9fbeb1 }, + {DDRC_FREQ2_DFITMG0 (0 ),0x03818200 }, + {DDRC_FREQ2_DFITMG2 (0 ),0x00000000 }, + {DDRC_FREQ2_RFSHTMG (0 ),0x0003800c }, + {DDRC_FREQ2_RFSHTMG (0 ),0x00030007 }, + {DDRC_FREQ2_INIT3 (0 ),0x00840000 }, + {DDRC_FREQ2_INIT4 (0 ),0x00310008 }, + {DDRC_FREQ2_INIT4 (0 ), (LPDDR4_MR3 <<16 ) |0x0000 }, + {DDRC_FREQ2_INIT6 (0 ),0x0066004a }, + {DDRC_FREQ2_INIT7 (0 ),0x0006004a }, + +/* boot start point */ + {DDRC_MSTR2 (0 ),0x2 },//DDRC_MSTR2 +}; + +/* PHY Initialize Configuration */ +struct dram_cfg_param lpddr4_ddrphy_cfg[] = { + {0x1005f ,0x1ff }, + {0x1015f ,0x1ff }, + {0x1105f ,0x1ff }, + {0x1115f ,0x1ff }, + {0x1205f ,0x1ff }, + {0x1215f ,0x1ff }, + {0x1305f ,0x1ff }, + {0x1315f ,0x1ff }, + + {0x11005f ,0x1ff }, + {0x11015f ,0x1ff }, + {0x11105f ,0x1ff }, + {0x11115f ,0x1ff }, + {0x11205f ,0x1ff }, + {0x11215f ,0x1ff }, + {0x11305f ,0x1ff }, + {0x11315f ,0x1ff }, + + {0x21005f ,0x1ff }, + {0x21015f ,0x1ff }, + {0x21105f ,0x1ff }, + {0x21115f ,0x1ff }, + {0x21205f ,0x1ff }, + {0x21215f ,0x1ff }, + {0x21305f ,0x1ff }, + {0x21315f ,0x1ff }, + + {0x55 ,0x1ff }, + {0x1055 ,0x1ff }, + {0x2055 ,0x1ff }, + {0x3055 ,0x1ff }, + {0x4055 ,0x1ff }, + {0x5055 ,0x1ff }, + {0x6055 ,0x1ff }, + {0x7055 ,0x1ff }, + {0x8055 ,0x1ff }, + {0x9055 ,0x1ff }, + + {0x200c5 ,0x19 }, + {0x1200c5 ,0x7 }, + {0x2200c5 ,0x7 }, + + {0x2002e ,0x2 }, + {0x12002e ,0x2 }, + {0x22002e ,0x2 }, + + {0x90204 ,0x0 }, + {0x190204 ,0x0 }, + {0x290204 ,0x0 }, + + {0x20024 ,0xab }, + {0x2003a ,0x0 }, + + {0x120024 ,0xab }, + {0x2003a ,0x0 }, + + {0x220024 ,0xab }, + {0x2003a ,0x0 }, + + {0x20056 ,0x3 }, + {0x120056 ,0xa }, + {0x220056 ,0xa }, + + {0x1004d ,0xe00 }, + {0x1014d ,0xe00 }, + {0x1104d ,0xe00 }, + {0x1114d ,0xe00 }, + {0x1204d ,0xe00 }, + {0x1214d ,0xe00 }, + {0x1304d ,0xe00 }, + {0x1314d ,0xe00 }, + + {0x11004d ,0xe00 }, + {0x11014d ,0xe00 }, + {0x11104d ,0xe00 }, + {0x11114d ,0xe00 }, + {0x11204d ,0xe00 }, + {0x11214d ,0xe00 }, + {0x11304d ,0xe00 }, + {0x11314d ,0xe00 }, + + {0x21004d ,0xe00 }, + {0x21014d ,0xe00 }, + {0x21104d ,0xe00 }, + {0x21114d ,0xe00 }, + {0x21204d ,0xe00 }, + {0x21214d ,0xe00 }, + {0x21304d ,0xe00 }, + {0x21314d ,0xe00 }, + + {0x10049 ,0xfbe }, + {0x10149 ,0xfbe }, + {0x11049 ,0xfbe }, + {0x11149 ,0xfbe }, + {0x12049 ,0xfbe }, + {0x12149 ,0xfbe }, + {0x13049 ,0xfbe }, + {0x13149 ,0xfbe }, + + {0x110049 ,0xfbe }, + {0x110149 ,0xfbe }, + {0x111049 ,0xfbe }, + {0x111149 ,0xfbe }, + {0x112049 ,0xfbe }, + {0x112149 ,0xfbe }, + {0x113049 ,0xfbe }, + {0x113149 ,0xfbe }, + + {0x210049 ,0xfbe }, + {0x210149 ,0xfbe }, + {0x211049 ,0xfbe }, + {0x211149 ,0xfbe }, + {0x212049 ,0xfbe }, + {0x212149 ,0xfbe }, + {0x213049 ,0xfbe }, + {0x213149 ,0xfbe }, + + {0x43 ,0x63 }, + {0x1043 ,0x63 }, + {0x2043 ,0x63 }, + {0x3043 ,0x63 }, + {0x4043 ,0x63 }, + {0x5043 ,0x63 }, + {0x6043 ,0x63 }, + {0x7043 ,0x63 }, + {0x8043 ,0x63 }, + {0x9043 ,0x63 }, + + {0x20018 ,0x3 }, + {0x20075 ,0x4 }, + {0x20050 ,0x0 }, + {0x20008 ,0x2ee }, + {0x120008 ,0x64 }, + {0x220008 ,0x19 }, + {0x20088 ,0x9 }, + + {0x200b2 ,0x1d4 }, + {0x10043 ,0x5a1 }, + {0x10143 ,0x5a1 }, + {0x11043 ,0x5a1 }, + {0x11143 ,0x5a1 }, + {0x12043 ,0x5a1 }, + {0x12143 ,0x5a1 }, + {0x13043 ,0x5a1 }, + {0x13143 ,0x5a1 }, + + {0x1200b2 ,0xdc }, + {0x110043 ,0x5a1 }, + {0x110143 ,0x5a1 }, + {0x111043 ,0x5a1 }, + {0x111143 ,0x5a1 }, + {0x112043 ,0x5a1 }, + {0x112143 ,0x5a1 }, + {0x113043 ,0x5a1 }, + {0x113143 ,0x5a1 }, + + {0x2200b2 ,0xdc }, + {0x210043 ,0x5a1 }, + {0x210143 ,0x5a1 }, + {0x211043 ,0x5a1 }, + {0x211143 ,0x5a1 }, + {0x212043 ,0x5a1 }, + {0x212143 ,0x5a1 }, + {0x213043 ,0x5a1 }, + {0x213143 ,0x5a1 }, + + {0x200fa ,0x1 }, + {0x1200fa ,0x1 }, + {0x2200fa ,0x1 }, + + {0x20019 ,0x1 }, + {0x120019 ,0x1 }, + {0x220019 ,0x1 }, + + {0x200f0 ,0x660 }, + {0x200f1 ,0x0 }, + {0x200f2 ,0x4444 }, + {0x200f3 ,0x8888 }, + {0x200f4 ,0x5665 }, + {0x200f5 ,0x0 }, + {0x200f6 ,0x0 }, + {0x200f7 ,0xf000 }, +board/freescale/imx8mm_evk/lpddr4_timing.c line 319
Quoted 10 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +10
-0+ { 0x20025, 0x0 }, + { 0x2002d, LPDDR4_PHY_DMIPinPresent }, + { 0x12002d, LPDDR4_PHY_DMIPinPresent }, + { 0x22002d, LPDDR4_PHY_DMIPinPresent }, + { 0x200c7, 0x21 }, + { 0x200ca, 0x24 }, + { 0x1200c7, 0x21 }, + { 0x1200ca, 0x24 }, + { 0x2200c7, 0x21 }, + { 0x2200ca, 0x24 },Why do you add tuple - offset and value? Shouldn't we have the DDR training functions here?
It is possible to train IMX6Q and Vybrid's DDR3 (as fair as I know). Would it be also possible to add the DDR4 training code for IMX8?
Quoted 714 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +714
-0+}; + +/* ddr phy trained csr */ +struct dram_cfg_param lpddr4_ddrphy_trained_csr[] = { + {0x200b2 ,0x0 }, + {0x1200b2 ,0x0 }, + {0x2200b2 ,0x0 }, + {0x200cb ,0x0 }, + {0x10043 ,0x0 }, + {0x110043 ,0x0 }, + {0x210043 ,0x0 }, + {0x10143 ,0x0 }, + {0x110143 ,0x0 }, + {0x210143 ,0x0 }, + {0x11043 ,0x0 }, + {0x111043 ,0x0 }, + {0x211043 ,0x0 }, + {0x11143 ,0x0 }, + {0x111143 ,0x0 }, + {0x211143 ,0x0 }, + {0x12043 ,0x0 }, + {0x112043 ,0x0 }, + {0x212043 ,0x0 }, + {0x12143 ,0x0 }, + {0x112143 ,0x0 }, + {0x212143 ,0x0 }, + {0x13043 ,0x0 }, + {0x113043 ,0x0 }, + {0x213043 ,0x0 }, + {0x13143 ,0x0 }, + {0x113143 ,0x0 }, + {0x213143 ,0x0 }, + {0x80 ,0x0 }, + {0x100080 ,0x0 }, + {0x200080 ,0x0 }, + {0x1080 ,0x0 }, + {0x101080 ,0x0 }, + {0x201080 ,0x0 }, + {0x2080 ,0x0 }, + {0x102080 ,0x0 }, + {0x202080 ,0x0 }, + {0x3080 ,0x0 }, + {0x103080 ,0x0 }, + {0x203080 ,0x0 }, + {0x4080 ,0x0 }, + {0x104080 ,0x0 }, + {0x204080 ,0x0 }, + {0x5080 ,0x0 }, + {0x105080 ,0x0 }, + {0x205080 ,0x0 }, + {0x6080 ,0x0 }, + {0x106080 ,0x0 }, + {0x206080 ,0x0 }, + {0x7080 ,0x0 }, + {0x107080 ,0x0 }, + {0x207080 ,0x0 }, + {0x8080 ,0x0 }, + {0x108080 ,0x0 }, + {0x208080 ,0x0 }, + {0x9080 ,0x0 }, + {0x109080 ,0x0 }, + {0x209080 ,0x0 }, + {0x10080 ,0x0 }, + {0x110080 ,0x0 }, + {0x210080 ,0x0 }, + {0x10180 ,0x0 }, + {0x110180 ,0x0 }, + {0x210180 ,0x0 }, + {0x11080 ,0x0 }, + {0x111080 ,0x0 }, + {0x211080 ,0x0 }, + {0x11180 ,0x0 }, + {0x111180 ,0x0 }, + {0x211180 ,0x0 }, + {0x12080 ,0x0 }, + {0x112080 ,0x0 }, + {0x212080 ,0x0 }, + {0x12180 ,0x0 }, + {0x112180 ,0x0 }, + {0x212180 ,0x0 }, + {0x13080 ,0x0 }, + {0x113080 ,0x0 }, + {0x213080 ,0x0 }, + {0x13180 ,0x0 }, + {0x113180 ,0x0 }, + {0x213180 ,0x0 }, + {0x10081 ,0x0 }, + {0x110081 ,0x0 }, + {0x210081 ,0x0 }, + {0x10181 ,0x0 }, + {0x110181 ,0x0 }, + {0x210181 ,0x0 }, + {0x11081 ,0x0 }, + {0x111081 ,0x0 }, + {0x211081 ,0x0 }, + {0x11181 ,0x0 }, + {0x111181 ,0x0 }, + {0x211181 ,0x0 }, + {0x12081 ,0x0 }, + {0x112081 ,0x0 }, + {0x212081 ,0x0 }, + {0x12181 ,0x0 }, + {0x112181 ,0x0 }, + {0x212181 ,0x0 }, + {0x13081 ,0x0 }, + {0x113081 ,0x0 }, + {0x213081 ,0x0 }, + {0x13181 ,0x0 }, + {0x113181 ,0x0 }, + {0x213181 ,0x0 }, + {0x100d0 ,0x0 }, + {0x1100d0 ,0x0 }, + {0x2100d0 ,0x0 }, + {0x101d0 ,0x0 }, + {0x1101d0 ,0x0 }, + {0x2101d0 ,0x0 }, + {0x110d0 ,0x0 }, + {0x1110d0 ,0x0 }, + {0x2110d0 ,0x0 }, + {0x111d0 ,0x0 }, + {0x1111d0 ,0x0 }, + {0x2111d0 ,0x0 }, + {0x120d0 ,0x0 }, + {0x1120d0 ,0x0 }, + {0x2120d0 ,0x0 }, + {0x121d0 ,0x0 }, + {0x1121d0 ,0x0 }, + {0x2121d0 ,0x0 }, + {0x130d0 ,0x0 }, + {0x1130d0 ,0x0 }, + {0x2130d0 ,0x0 }, + {0x131d0 ,0x0 }, + {0x1131d0 ,0x0 }, + {0x2131d0 ,0x0 }, + {0x100d1 ,0x0 }, + {0x1100d1 ,0x0 }, + {0x2100d1 ,0x0 }, + {0x101d1 ,0x0 }, + {0x1101d1 ,0x0 }, + {0x2101d1 ,0x0 }, + {0x110d1 ,0x0 }, + {0x1110d1 ,0x0 }, + {0x2110d1 ,0x0 }, + {0x111d1 ,0x0 }, + {0x1111d1 ,0x0 }, + {0x2111d1 ,0x0 }, + {0x120d1 ,0x0 }, + {0x1120d1 ,0x0 }, + {0x2120d1 ,0x0 }, + {0x121d1 ,0x0 }, + {0x1121d1 ,0x0 }, + {0x2121d1 ,0x0 }, + {0x130d1 ,0x0 }, + {0x1130d1 ,0x0 }, + {0x2130d1 ,0x0 }, + {0x131d1 ,0x0 }, + {0x1131d1 ,0x0 }, + {0x2131d1 ,0x0 }, + {0x10068 ,0x0 }, + {0x10168 ,0x0 }, + {0x10268 ,0x0 }, + {0x10368 ,0x0 }, + {0x10468 ,0x0 }, + {0x10568 ,0x0 }, + {0x10668 ,0x0 }, + {0x10768 ,0x0 }, + {0x10868 ,0x0 }, + {0x11068 ,0x0 }, + {0x11168 ,0x0 }, + {0x11268 ,0x0 }, + {0x11368 ,0x0 }, + {0x11468 ,0x0 }, + {0x11568 ,0x0 }, + {0x11668 ,0x0 }, + {0x11768 ,0x0 }, + {0x11868 ,0x0 }, + {0x12068 ,0x0 }, + {0x12168 ,0x0 }, + {0x12268 ,0x0 }, + {0x12368 ,0x0 }, + {0x12468 ,0x0 }, + {0x12568 ,0x0 }, + {0x12668 ,0x0 }, + {0x12768 ,0x0 }, + {0x12868 ,0x0 }, + {0x13068 ,0x0 }, + {0x13168 ,0x0 }, + {0x13268 ,0x0 }, + {0x13368 ,0x0 }, + {0x13468 ,0x0 }, + {0x13568 ,0x0 }, + {0x13668 ,0x0 }, + {0x13768 ,0x0 }, + {0x13868 ,0x0 }, + {0x10069 ,0x0 }, + {0x10169 ,0x0 }, + {0x10269 ,0x0 }, + {0x10369 ,0x0 }, + {0x10469 ,0x0 }, + {0x10569 ,0x0 }, + {0x10669 ,0x0 }, + {0x10769 ,0x0 }, + {0x10869 ,0x0 }, + {0x11069 ,0x0 }, + {0x11169 ,0x0 }, + {0x11269 ,0x0 }, + {0x11369 ,0x0 }, + {0x11469 ,0x0 }, + {0x11569 ,0x0 }, + {0x11669 ,0x0 }, + {0x11769 ,0x0 }, + {0x11869 ,0x0 }, + {0x12069 ,0x0 }, + {0x12169 ,0x0 }, + {0x12269 ,0x0 }, + {0x12369 ,0x0 }, + {0x12469 ,0x0 }, + {0x12569 ,0x0 }, + {0x12669 ,0x0 }, + {0x12769 ,0x0 }, + {0x12869 ,0x0 }, + {0x13069 ,0x0 }, + {0x13169 ,0x0 }, + {0x13269 ,0x0 }, + {0x13369 ,0x0 }, + {0x13469 ,0x0 }, + {0x13569 ,0x0 }, + {0x13669 ,0x0 }, + {0x13769 ,0x0 }, + {0x13869 ,0x0 }, + {0x1008c ,0x0 }, + {0x11008c ,0x0 }, + {0x21008c ,0x0 }, + {0x1018c ,0x0 }, + {0x11018c ,0x0 }, + {0x21018c ,0x0 }, + {0x1108c ,0x0 }, + {0x11108c ,0x0 }, + {0x21108c ,0x0 }, + {0x1118c ,0x0 }, + {0x11118c ,0x0 }, + {0x21118c ,0x0 }, + {0x1208c ,0x0 }, + {0x11208c ,0x0 }, + {0x21208c ,0x0 }, + {0x1218c ,0x0 }, + {0x11218c ,0x0 }, + {0x21218c ,0x0 }, + {0x1308c ,0x0 }, + {0x11308c ,0x0 }, + {0x21308c ,0x0 }, + {0x1318c ,0x0 }, + {0x11318c ,0x0 }, + {0x21318c ,0x0 }, + {0x1008d ,0x0 }, + {0x11008d ,0x0 }, + {0x21008d ,0x0 }, + {0x1018d ,0x0 }, + {0x11018d ,0x0 }, + {0x21018d ,0x0 }, + {0x1108d ,0x0 }, + {0x11108d ,0x0 }, + {0x21108d ,0x0 }, + {0x1118d ,0x0 }, + {0x11118d ,0x0 }, + {0x21118d ,0x0 }, + {0x1208d ,0x0 }, + {0x11208d ,0x0 }, + {0x21208d ,0x0 }, + {0x1218d ,0x0 }, + {0x11218d ,0x0 }, + {0x21218d ,0x0 }, + {0x1308d ,0x0 }, + {0x11308d ,0x0 }, + {0x21308d ,0x0 }, + {0x1318d ,0x0 }, + {0x11318d ,0x0 }, + {0x21318d ,0x0 }, + {0x100c0 ,0x0 }, + {0x1100c0 ,0x0 }, + {0x2100c0 ,0x0 }, + {0x101c0 ,0x0 }, + {0x1101c0 ,0x0 }, + {0x2101c0 ,0x0 }, + {0x102c0 ,0x0 }, + {0x1102c0 ,0x0 }, + {0x2102c0 ,0x0 }, + {0x103c0 ,0x0 }, + {0x1103c0 ,0x0 }, + {0x2103c0 ,0x0 }, + {0x104c0 ,0x0 }, + {0x1104c0 ,0x0 }, + {0x2104c0 ,0x0 }, + {0x105c0 ,0x0 }, + {0x1105c0 ,0x0 }, + {0x2105c0 ,0x0 }, + {0x106c0 ,0x0 }, + {0x1106c0 ,0x0 }, + {0x2106c0 ,0x0 }, + {0x107c0 ,0x0 }, + {0x1107c0 ,0x0 }, + {0x2107c0 ,0x0 }, + {0x108c0 ,0x0 }, + {0x1108c0 ,0x0 }, + {0x2108c0 ,0x0 }, + {0x110c0 ,0x0 }, + {0x1110c0 ,0x0 }, + {0x2110c0 ,0x0 }, + {0x111c0 ,0x0 }, + {0x1111c0 ,0x0 }, + {0x2111c0 ,0x0 }, + {0x112c0 ,0x0 }, + {0x1112c0 ,0x0 }, + {0x2112c0 ,0x0 }, + {0x113c0 ,0x0 }, + {0x1113c0 ,0x0 }, + {0x2113c0 ,0x0 }, + {0x114c0 ,0x0 }, + {0x1114c0 ,0x0 }, + {0x2114c0 ,0x0 }, + {0x115c0 ,0x0 }, + {0x1115c0 ,0x0 }, + {0x2115c0 ,0x0 }, + {0x116c0 ,0x0 }, + {0x1116c0 ,0x0 }, + {0x2116c0 ,0x0 }, + {0x117c0 ,0x0 }, + {0x1117c0 ,0x0 }, + {0x2117c0 ,0x0 }, + {0x118c0 ,0x0 }, + {0x1118c0 ,0x0 }, + {0x2118c0 ,0x0 }, + {0x120c0 ,0x0 }, + {0x1120c0 ,0x0 }, + {0x2120c0 ,0x0 }, + {0x121c0 ,0x0 }, + {0x1121c0 ,0x0 }, + {0x2121c0 ,0x0 }, + {0x122c0 ,0x0 }, + {0x1122c0 ,0x0 }, + {0x2122c0 ,0x0 }, + {0x123c0 ,0x0 }, + {0x1123c0 ,0x0 }, + {0x2123c0 ,0x0 }, + {0x124c0 ,0x0 }, + {0x1124c0 ,0x0 }, + {0x2124c0 ,0x0 }, + {0x125c0 ,0x0 }, + {0x1125c0 ,0x0 }, + {0x2125c0 ,0x0 }, + {0x126c0 ,0x0 }, + {0x1126c0 ,0x0 }, + {0x2126c0 ,0x0 }, + {0x127c0 ,0x0 }, + {0x1127c0 ,0x0 }, + {0x2127c0 ,0x0 }, + {0x128c0 ,0x0 }, + {0x1128c0 ,0x0 }, + {0x2128c0 ,0x0 }, + {0x130c0 ,0x0 }, + {0x1130c0 ,0x0 }, + {0x2130c0 ,0x0 }, + {0x131c0 ,0x0 }, + {0x1131c0 ,0x0 }, + {0x2131c0 ,0x0 }, + {0x132c0 ,0x0 }, + {0x1132c0 ,0x0 }, + {0x2132c0 ,0x0 }, + {0x133c0 ,0x0 }, + {0x1133c0 ,0x0 }, + {0x2133c0 ,0x0 }, + {0x134c0 ,0x0 }, + {0x1134c0 ,0x0 }, + {0x2134c0 ,0x0 }, + {0x135c0 ,0x0 }, + {0x1135c0 ,0x0 }, + {0x2135c0 ,0x0 }, + {0x136c0 ,0x0 }, + {0x1136c0 ,0x0 }, + {0x2136c0 ,0x0 }, + {0x137c0 ,0x0 }, + {0x1137c0 ,0x0 }, + {0x2137c0 ,0x0 }, + {0x138c0 ,0x0 }, + {0x1138c0 ,0x0 }, + {0x2138c0 ,0x0 }, + {0x100c1 ,0x0 }, + {0x1100c1 ,0x0 }, + {0x2100c1 ,0x0 }, + {0x101c1 ,0x0 }, + {0x1101c1 ,0x0 }, + {0x2101c1 ,0x0 }, + {0x102c1 ,0x0 }, + {0x1102c1 ,0x0 }, + {0x2102c1 ,0x0 }, + {0x103c1 ,0x0 }, + {0x1103c1 ,0x0 }, + {0x2103c1 ,0x0 }, + {0x104c1 ,0x0 }, + {0x1104c1 ,0x0 }, + {0x2104c1 ,0x0 }, + {0x105c1 ,0x0 }, + {0x1105c1 ,0x0 }, + {0x2105c1 ,0x0 }, + {0x106c1 ,0x0 }, + {0x1106c1 ,0x0 }, + {0x2106c1 ,0x0 }, + {0x107c1 ,0x0 }, + {0x1107c1 ,0x0 }, + {0x2107c1 ,0x0 }, + {0x108c1 ,0x0 }, + {0x1108c1 ,0x0 }, + {0x2108c1 ,0x0 }, + {0x110c1 ,0x0 }, + {0x1110c1 ,0x0 }, + {0x2110c1 ,0x0 }, + {0x111c1 ,0x0 }, + {0x1111c1 ,0x0 }, + {0x2111c1 ,0x0 }, + {0x112c1 ,0x0 }, + {0x1112c1 ,0x0 }, + {0x2112c1 ,0x0 }, + {0x113c1 ,0x0 }, + {0x1113c1 ,0x0 }, + {0x2113c1 ,0x0 }, + {0x114c1 ,0x0 }, + {0x1114c1 ,0x0 }, + {0x2114c1 ,0x0 }, + {0x115c1 ,0x0 }, + {0x1115c1 ,0x0 }, + {0x2115c1 ,0x0 }, + {0x116c1 ,0x0 }, + {0x1116c1 ,0x0 }, + {0x2116c1 ,0x0 }, + {0x117c1 ,0x0 }, + {0x1117c1 ,0x0 }, + {0x2117c1 ,0x0 }, + {0x118c1 ,0x0 }, + {0x1118c1 ,0x0 }, + {0x2118c1 ,0x0 }, + {0x120c1 ,0x0 }, + {0x1120c1 ,0x0 }, + {0x2120c1 ,0x0 }, + {0x121c1 ,0x0 }, + {0x1121c1 ,0x0 }, + {0x2121c1 ,0x0 }, + {0x122c1 ,0x0 }, + {0x1122c1 ,0x0 }, + {0x2122c1 ,0x0 }, + {0x123c1 ,0x0 }, + {0x1123c1 ,0x0 }, + {0x2123c1 ,0x0 }, + {0x124c1 ,0x0 }, + {0x1124c1 ,0x0 }, + {0x2124c1 ,0x0 }, + {0x125c1 ,0x0 }, + {0x1125c1 ,0x0 }, + {0x2125c1 ,0x0 }, + {0x126c1 ,0x0 }, + {0x1126c1 ,0x0 }, + {0x2126c1 ,0x0 }, + {0x127c1 ,0x0 }, + {0x1127c1 ,0x0 }, + {0x2127c1 ,0x0 }, + {0x128c1 ,0x0 }, + {0x1128c1 ,0x0 }, + {0x2128c1 ,0x0 }, + {0x130c1 ,0x0 }, + {0x1130c1 ,0x0 }, + {0x2130c1 ,0x0 }, + {0x131c1 ,0x0 }, + {0x1131c1 ,0x0 }, + {0x2131c1 ,0x0 }, + {0x132c1 ,0x0 }, + {0x1132c1 ,0x0 }, + {0x2132c1 ,0x0 }, + {0x133c1 ,0x0 }, + {0x1133c1 ,0x0 }, + {0x2133c1 ,0x0 }, + {0x134c1 ,0x0 }, + {0x1134c1 ,0x0 }, + {0x2134c1 ,0x0 }, + {0x135c1 ,0x0 }, + {0x1135c1 ,0x0 }, + {0x2135c1 ,0x0 }, + {0x136c1 ,0x0 }, + {0x1136c1 ,0x0 }, + {0x2136c1 ,0x0 }, + {0x137c1 ,0x0 }, + {0x1137c1 ,0x0 }, + {0x2137c1 ,0x0 }, + {0x138c1 ,0x0 }, + {0x1138c1 ,0x0 }, + {0x2138c1 ,0x0 }, + {0x10020 ,0x0 }, + {0x110020 ,0x0 }, + {0x210020 ,0x0 }, + {0x11020 ,0x0 }, + {0x111020 ,0x0 }, + {0x211020 ,0x0 }, + {0x12020 ,0x0 }, + {0x112020 ,0x0 }, + {0x212020 ,0x0 }, + {0x13020 ,0x0 }, + {0x113020 ,0x0 }, + {0x213020 ,0x0 }, + {0x20072 ,0x0 }, + {0x20073 ,0x0 }, + {0x20074 ,0x0 }, + {0x100aa ,0x0 }, + {0x110aa ,0x0 }, + {0x120aa ,0x0 }, + {0x130aa ,0x0 }, + {0x20010 ,0x0 }, + {0x120010 ,0x0 }, + {0x220010 ,0x0 }, + {0x20011 ,0x0 }, + {0x120011 ,0x0 }, + {0x220011 ,0x0 }, + {0x100ae ,0x0 }, + {0x1100ae ,0x0 }, + {0x2100ae ,0x0 }, + {0x100af ,0x0 }, + {0x1100af ,0x0 }, + {0x2100af ,0x0 }, + {0x110ae ,0x0 }, + {0x1110ae ,0x0 }, + {0x2110ae ,0x0 }, + {0x110af ,0x0 }, + {0x1110af ,0x0 }, + {0x2110af ,0x0 }, + {0x120ae ,0x0 }, + {0x1120ae ,0x0 }, + {0x2120ae ,0x0 }, + {0x120af ,0x0 }, + {0x1120af ,0x0 }, + {0x2120af ,0x0 }, + {0x130ae ,0x0 }, + {0x1130ae ,0x0 }, + {0x2130ae ,0x0 }, + {0x130af ,0x0 }, + {0x1130af ,0x0 }, + {0x2130af ,0x0 }, + {0x20020 ,0x0 }, + {0x120020 ,0x0 }, + {0x220020 ,0x0 }, + {0x100a0 ,0x0 }, + {0x100a1 ,0x0 }, + {0x100a2 ,0x0 }, + {0x100a3 ,0x0 }, + {0x100a4 ,0x0 }, + {0x100a5 ,0x0 }, + {0x100a6 ,0x0 }, + {0x100a7 ,0x0 }, + {0x110a0 ,0x0 }, + {0x110a1 ,0x0 }, + {0x110a2 ,0x0 }, + {0x110a3 ,0x0 }, + {0x110a4 ,0x0 }, + {0x110a5 ,0x0 }, + {0x110a6 ,0x0 }, + {0x110a7 ,0x0 }, + {0x120a0 ,0x0 }, + {0x120a1 ,0x0 }, + {0x120a2 ,0x0 }, + {0x120a3 ,0x0 }, + {0x120a4 ,0x0 }, + {0x120a5 ,0x0 }, + {0x120a6 ,0x0 }, + {0x120a7 ,0x0 }, + {0x130a0 ,0x0 }, + {0x130a1 ,0x0 }, + {0x130a2 ,0x0 }, + {0x130a3 ,0x0 }, + {0x130a4 ,0x0 }, + {0x130a5 ,0x0 }, + {0x130a6 ,0x0 }, + {0x130a7 ,0x0 }, + {0x2007c ,0x0 }, + {0x12007c ,0x0 }, + {0x22007c ,0x0 }, + {0x2007d ,0x0 }, + {0x12007d ,0x0 }, + {0x22007d ,0x0 }, + {0x400fd ,0x0 }, + {0x400c0 ,0x0 }, + {0x90201 ,0x0 }, + {0x190201 ,0x0 }, + {0x290201 ,0x0 }, + {0x90202 ,0x0 }, + {0x190202 ,0x0 }, + {0x290202 ,0x0 }, + {0x90203 ,0x0 }, + {0x190203 ,0x0 }, + {0x290203 ,0x0 }, + {0x90204 ,0x0 }, + {0x190204 ,0x0 }, + {0x290204 ,0x0 }, + {0x90205 ,0x0 }, + {0x190205 ,0x0 }, + {0x290205 ,0x0 }, + {0x90206 ,0x0 }, + {0x190206 ,0x0 }, + {0x290206 ,0x0 }, + {0x90207 ,0x0 }, + {0x190207 ,0x0 }, + {0x290207 ,0x0 }, + {0x90208 ,0x0 }, + {0x190208 ,0x0 }, + {0x290208 ,0x0 }, + {0x10062 ,0x0 }, + {0x10162 ,0x0 }, + {0x10262 ,0x0 }, + {0x10362 ,0x0 }, + {0x10462 ,0x0 }, + {0x10562 ,0x0 }, + {0x10662 ,0x0 }, + {0x10762 ,0x0 }, + {0x10862 ,0x0 }, + {0x11062 ,0x0 }, + {0x11162 ,0x0 }, + {0x11262 ,0x0 }, + {0x11362 ,0x0 }, + {0x11462 ,0x0 }, + {0x11562 ,0x0 }, + {0x11662 ,0x0 }, + {0x11762 ,0x0 }, + {0x11862 ,0x0 }, + {0x12062 ,0x0 }, + {0x12162 ,0x0 }, + {0x12262 ,0x0 }, + {0x12362 ,0x0 }, + {0x12462 ,0x0 }, + {0x12562 ,0x0 }, + {0x12662 ,0x0 }, + {0x12762 ,0x0 }, + {0x12862 ,0x0 }, + {0x13062 ,0x0 }, + {0x13162 ,0x0 }, + {0x13262 ,0x0 }, + {0x13362 ,0x0 }, + {0x13462 ,0x0 }, + {0x13562 ,0x0 }, + {0x13662 ,0x0 }, + {0x13762 ,0x0 }, + {0x13862 ,0x0 }, + {0x20077 ,0x0 }, + {0x10001 ,0x0 }, + {0x11001 ,0x0 }, + {0x12001 ,0x0 }, + {0x13001 ,0x0 }, + {0x10040 ,0x0 }, + {0x10140 ,0x0 }, + {0x10240 ,0x0 }, + {0x10340 ,0x0 }, + {0x10440 ,0x0 }, + {0x10540 ,0x0 }, + {0x10640 ,0x0 }, + {0x10740 ,0x0 }, + {0x10840 ,0x0 }, + {0x10030 ,0x0 }, + {0x10130 ,0x0 }, + {0x10230 ,0x0 }, + {0x10330 ,0x0 }, + {0x10430 ,0x0 }, + {0x10530 ,0x0 }, + {0x10630 ,0x0 }, + {0x10730 ,0x0 }, + {0x10830 ,0x0 }, + {0x11040 ,0x0 }, + {0x11140 ,0x0 }, + {0x11240 ,0x0 }, + {0x11340 ,0x0 }, + {0x11440 ,0x0 }, + {0x11540 ,0x0 }, + {0x11640 ,0x0 }, + {0x11740 ,0x0 }, + {0x11840 ,0x0 }, + {0x11030 ,0x0 }, + {0x11130 ,0x0 }, + {0x11230 ,0x0 }, + {0x11330 ,0x0 }, + {0x11430 ,0x0 }, + {0x11530 ,0x0 }, + {0x11630 ,0x0 }, + {0x11730 ,0x0 }, + {0x11830 ,0x0 }, + {0x12040 ,0x0 }, + {0x12140 ,0x0 }, + {0x12240 ,0x0 }, + {0x12340 ,0x0 }, + {0x12440 ,0x0 }, + {0x12540 ,0x0 }, + {0x12640 ,0x0 }, + {0x12740 ,0x0 }, + {0x12840 ,0x0 }, + {0x12030 ,0x0 }, + {0x12130 ,0x0 }, + {0x12230 ,0x0 }, + {0x12330 ,0x0 }, + {0x12430 ,0x0 }, + {0x12530 ,0x0 }, + {0x12630 ,0x0 }, + {0x12730 ,0x0 }, + {0x12830 ,0x0 }, + {0x13040 ,0x0 }, + {0x13140 ,0x0 }, + {0x13240 ,0x0 }, + {0x13340 ,0x0 }, + {0x13440 ,0x0 }, + {0x13540 ,0x0 }, + {0x13640 ,0x0 }, + {0x13740 ,0x0 }, + {0x13840 ,0x0 },board/freescale/imx8mm_evk/lpddr4_timing.c line 1043
Quoted 10 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +10
-0+ { 0x13030, 0x0 }, + { 0x13130, 0x0 }, + { 0x13230, 0x0 }, + { 0x13330, 0x0 }, + { 0x13430, 0x0 }, + { 0x13530, 0x0 }, + { 0x13630, 0x0 }, + { 0x13730, 0x0 }, + { 0x13830, 0x0 }, +};The same as above. Please look into imx6q DDR3 training code.
Quoted 886 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +10
-0+ +/* P0 message block paremeter for training firmware */ +struct dram_cfg_param lpddr4_fsp0_cfg[] = { + {0xd0000 ,0x0 }, + {0x54000 ,0x0 }, + {0x54001 ,0x0 }, + {0x54002 ,0x0 }, + {0x54003 ,0xbb8 }, + {0x54004 ,0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) |
LPDDR4_PHY_RTT) },//PHY Ron/Rttboard/freescale/imx8mm_evk/lpddr4_timing.c new file +75
-0+ { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x131f }, + { 0x54009, 0xc8 }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, 0x0 }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x0 }, + { 0x54010, 0x0 }, + { 0x54011, 0x0 }, + { 0x54012, (LPDDR4_CS << 8) | (0x110 & 0xff) }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x2dd4 }, + { 0x5401a, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x5401b, 0x4d66 }, + { 0x5401c, 0x4d08 }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0/*0x16*/ }, + { 0x5401f, 0x2dd4 }, + { 0x54020, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x54021, 0x4d66 }, + { 0x54022, 0x4d08 }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1/*0x16*/ }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, LPDDR4_CS }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0xd400 }, + { 0x54033, (LPDDR4_MR3 << 8) | (0x312d & 0xff) }, + { 0x54034, 0x6600 }, + { 0x54035, 0x84d }, + { 0x54036, 0x4d }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x1600*/ }, + { 0x54038, 0xd400 }, + { 0x54039, (LPDDR4_MR3 << 8) | (0x312d & 0xff) }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x84d }, + { 0x5403c, 0x4d }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x1600*/ }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* P1 message block paremeter for training firmware */ +struct dram_cfg_param lpddr4_fsp1_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54000, 0x0 }, + { 0x54001, 0x0 }, + { 0x54002, 0x101 }, + { 0x54003, 0x190 }, + { 0x54004, 0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) |
LPDDR4_PHY_RTT) },//PHY Ron/Rttboard/freescale/imx8mm_evk/lpddr4_timing.c new file +75
-0+ { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x121f }, + { 0x54009, 0xc8 }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, 0x0 }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x0 }, + { 0x54010, 0x0 }, + { 0x54011, 0x0 }, + { 0x54012, (LPDDR4_CS << 8) | (0x110 & 0xff) }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x84 }, + { 0x5401a, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x5401b, 0x4d66 }, + { 0x5401c, 0x4d08 }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0/*0x16*/ }, + { 0x5401f, 0x84 }, + { 0x54020, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x54021, 0x4d66 }, + { 0x54022, 0x4d08 }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1/*0x16*/ }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, LPDDR4_CS }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0x8400 }, + { 0x54033, (LPDDR4_MR3 << 8) | (0x3100 & 0xff) }, + { 0x54034, 0x6600 }, + { 0x54035, 0x84d }, + { 0x54036, 0x4d }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x1600*/ }, + { 0x54038, 0x8400 }, + { 0x54039, (LPDDR4_MR3 << 8) | (0x3100 & 0xff) }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x84d }, + { 0x5403c, 0x4d }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x1600*/ }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* P1 message block paremeter for training firmware */ +struct dram_cfg_param lpddr4_fsp2_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54000, 0x0 }, + { 0x54001, 0x0 }, + { 0x54002, 0x102 }, + { 0x54003, 0x64 }, + { 0x54004, 0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) |
LPDDR4_PHY_RTT) },//PHY Ron/Rttboard/freescale/imx8mm_evk/lpddr4_timing.c new file +75
-0+ { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x121f }, + { 0x54009, 0xc8 }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, 0x0 }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x0 }, + { 0x54010, 0x0 }, + { 0x54011, 0x0 }, + { 0x54012, (LPDDR4_CS << 8) | (0x110 & 0xff) }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x84 }, + { 0x5401a, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x5401b, 0x4d66 }, + { 0x5401c, 0x4d08 }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0/*0x16*/ }, + { 0x5401f, 0x84 }, + { 0x54020, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x54021, 0x4d66 }, + { 0x54022, 0x4d08 }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1/*0x16*/ }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, LPDDR4_CS }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0x8400 }, + { 0x54033, (LPDDR4_MR3 << 8) | (0x3100 & 0xff) }, + { 0x54034, 0x6600 }, + { 0x54035, 0x84d }, + { 0x54036, 0x4d }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x1600*/ }, + { 0x54038, 0x8400 }, + { 0x54039, (LPDDR4_MR3 << 8) | (0x3100 & 0xff) }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x84d }, + { 0x5403c, 0x4d }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x1600*/ }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* P0 2D message block paremeter for training firmware */ +struct dram_cfg_param lpddr4_fsp0_2d_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54000, 0x0 }, + { 0x54001, 0x0 }, + { 0x54002, 0x0 }, + { 0x54003, 0xbb8 }, + { 0x54004, 0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) |
LPDDR4_PHY_RTT) },//PHY Ron/Rttboard/freescale/imx8mm_evk/lpddr4_timing.c new file +647
-0+ { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x61 }, + { 0x54009, 0xc8 }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, 0x0 }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x100 }, + { 0x54010, 0x1f7f }, + { 0x54011, 0x0 }, + { 0x54012, (LPDDR4_CS << 8) | (0x110 & 0xff) }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x2dd4 }, + { 0x5401a, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x5401b, 0x4d66 }, + { 0x5401c, 0x4d08 }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0/*0x16*/ }, + { 0x5401f, 0x2dd4 }, + { 0x54020, (0x31 & 0xff00) | LPDDR4_MR3 }, + { 0x54021, 0x4d66 }, + { 0x54022, 0x4d08 }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1/*0x16*/ }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, LPDDR4_CS }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0xd400 }, + { 0x54033, (LPDDR4_MR3 << 8) | (0x312d & 0xff) }, + { 0x54034, 0x6600 }, + { 0x54035, 0x84d }, + { 0x54036, 0x4d }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x1600*/ }, + { 0x54038, 0xd400 }, + { 0x54039, (LPDDR4_MR3 << 8) | (0x312d & 0xff) }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x84d }, + { 0x5403c, 0x4d }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x1600*/ }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* DRAM PHY init engine image */ +struct dram_cfg_param lpddr4_phy_pie[] = { + {0xd0000 ,0x0 }, + {0x90000 ,0x10 }, + {0x90001 ,0x400 }, + {0x90002 ,0x10e }, + {0x90003 ,0x0 }, + {0x90004 ,0x0 }, + {0x90005 ,0x8 }, + {0x90029 ,0xb }, + {0x9002a ,0x480 }, + {0x9002b ,0x109 }, + {0x9002c ,0x8 }, + {0x9002d ,0x448 }, + {0x9002e ,0x139 }, + {0x9002f ,0x8 }, + {0x90030 ,0x478 }, + {0x90031 ,0x109 }, + {0x90032 ,0x0 }, + {0x90033 ,0xe8 }, + {0x90034 ,0x109 }, + {0x90035 ,0x2 }, + {0x90036 ,0x10 }, + {0x90037 ,0x139 }, + {0x90038 ,0xf }, + {0x90039 ,0x7c0 }, + {0x9003a ,0x139 }, + {0x9003b ,0x44 }, + {0x9003c ,0x630 }, + {0x9003d ,0x159 }, + {0x9003e ,0x14f }, + {0x9003f ,0x630 }, + {0x90040 ,0x159 }, + {0x90041 ,0x47 }, + {0x90042 ,0x630 }, + {0x90043 ,0x149 }, + {0x90044 ,0x4f }, + {0x90045 ,0x630 }, + {0x90046 ,0x179 }, + {0x90047 ,0x8 }, + {0x90048 ,0xe0 }, + {0x90049 ,0x109 }, + {0x9004a ,0x0 }, + {0x9004b ,0x7c8 }, + {0x9004c ,0x109 }, + {0x9004d ,0x0 }, + {0x9004e ,0x1 }, + {0x9004f ,0x8 }, + {0x90050 ,0x0 }, + {0x90051 ,0x45a }, + {0x90052 ,0x9 }, + {0x90053 ,0x0 }, + {0x90054 ,0x448 }, + {0x90055 ,0x109 }, + {0x90056 ,0x40 }, + {0x90057 ,0x630 }, + {0x90058 ,0x179 }, + {0x90059 ,0x1 }, + {0x9005a ,0x618 }, + {0x9005b ,0x109 }, + {0x9005c ,0x40c0 }, + {0x9005d ,0x630 }, + {0x9005e ,0x149 }, + {0x9005f ,0x8 }, + {0x90060 ,0x4 }, + {0x90061 ,0x48 }, + {0x90062 ,0x4040 }, + {0x90063 ,0x630 }, + {0x90064 ,0x149 }, + {0x90065 ,0x0 }, + {0x90066 ,0x4 }, + {0x90067 ,0x48 }, + {0x90068 ,0x40 }, + {0x90069 ,0x630 }, + {0x9006a ,0x149 }, + {0x9006b ,0x10 }, + {0x9006c ,0x4 }, + {0x9006d ,0x18 }, + {0x9006e ,0x0 }, + {0x9006f ,0x4 }, + {0x90070 ,0x78 }, + {0x90071 ,0x549 }, + {0x90072 ,0x630 }, + {0x90073 ,0x159 }, + {0x90074 ,0xd49 }, + {0x90075 ,0x630 }, + {0x90076 ,0x159 }, + {0x90077 ,0x94a }, + {0x90078 ,0x630 }, + {0x90079 ,0x159 }, + {0x9007a ,0x441 }, + {0x9007b ,0x630 }, + {0x9007c ,0x149 }, + {0x9007d ,0x42 }, + {0x9007e ,0x630 }, + {0x9007f ,0x149 }, + {0x90080 ,0x1 }, + {0x90081 ,0x630 }, + {0x90082 ,0x149 }, + {0x90083 ,0x0 }, + {0x90084 ,0xe0 }, + {0x90085 ,0x109 }, + {0x90086 ,0xa }, + {0x90087 ,0x10 }, + {0x90088 ,0x109 }, + {0x90089 ,0x9 }, + {0x9008a ,0x3c0 }, + {0x9008b ,0x149 }, + {0x9008c ,0x9 }, + {0x9008d ,0x3c0 }, + {0x9008e ,0x159 }, + {0x9008f ,0x18 }, + {0x90090 ,0x10 }, + {0x90091 ,0x109 }, + {0x90092 ,0x0 }, + {0x90093 ,0x3c0 }, + {0x90094 ,0x109 }, + {0x90095 ,0x18 }, + {0x90096 ,0x4 }, + {0x90097 ,0x48 }, + {0x90098 ,0x18 }, + {0x90099 ,0x4 }, + {0x9009a ,0x58 }, + {0x9009b ,0xa }, + {0x9009c ,0x10 }, + {0x9009d ,0x109 }, + {0x9009e ,0x2 }, + {0x9009f ,0x10 }, + {0x900a0 ,0x109 }, + {0x900a1 ,0x5 }, + {0x900a2 ,0x7c0 }, + {0x900a3 ,0x109 }, + {0x900a4 ,0x10 }, + {0x900a5 ,0x10 }, + {0x900a6 ,0x109 }, + {0x40000 ,0x811 }, + {0x40020 ,0x880 }, + {0x40040 ,0x0 }, + {0x40060 ,0x0 }, + {0x40001 ,0x4008 }, + {0x40021 ,0x83 }, + {0x40041 ,0x4f }, + {0x40061 ,0x0 }, + {0x40002 ,0x4040 }, + {0x40022 ,0x83 }, + {0x40042 ,0x51 }, + {0x40062 ,0x0 }, + {0x40003 ,0x811 }, + {0x40023 ,0x880 }, + {0x40043 ,0x0 }, + {0x40063 ,0x0 }, + {0x40004 ,0x720 }, + {0x40024 ,0xf }, + {0x40044 ,0x1740 }, + {0x40064 ,0x0 }, + {0x40005 ,0x16 }, + {0x40025 ,0x83 }, + {0x40045 ,0x4b }, + {0x40065 ,0x0 }, + {0x40006 ,0x716 }, + {0x40026 ,0xf }, + {0x40046 ,0x2001 }, + {0x40066 ,0x0 }, + {0x40007 ,0x716 }, + {0x40027 ,0xf }, + {0x40047 ,0x2800 }, + {0x40067 ,0x0 }, + {0x40008 ,0x716 }, + {0x40028 ,0xf }, + {0x40048 ,0xf00 }, + {0x40068 ,0x0 }, + {0x40009 ,0x720 }, + {0x40029 ,0xf }, + {0x40049 ,0x1400 }, + {0x40069 ,0x0 }, + {0x4000a ,0xe08 }, + {0x4002a ,0xc15 }, + {0x4004a ,0x0 }, + {0x4006a ,0x0 }, + {0x4000b ,0x623 }, + {0x4002b ,0x15 }, + {0x4004b ,0x0 }, + {0x4006b ,0x0 }, + {0x4000c ,0x4028 }, + {0x4002c ,0x80 }, + {0x4004c ,0x0 }, + {0x4006c ,0x0 }, + {0x4000d ,0xe08 }, + {0x4002d ,0xc1a }, + {0x4004d ,0x0 }, + {0x4006d ,0x0 }, + {0x4000e ,0x623 }, + {0x4002e ,0x1a }, + {0x4004e ,0x0 }, + {0x4006e ,0x0 }, + {0x4000f ,0x4040 }, + {0x4002f ,0x80 }, + {0x4004f ,0x0 }, + {0x4006f ,0x0 }, + {0x40010 ,0x2604 }, + {0x40030 ,0x15 }, + {0x40050 ,0x0 }, + {0x40070 ,0x0 }, + {0x40011 ,0x708 }, + {0x40031 ,0x5 }, + {0x40051 ,0x0 }, + {0x40071 ,0x2002 }, + {0x40012 ,0x8 }, + {0x40032 ,0x80 }, + {0x40052 ,0x0 }, + {0x40072 ,0x0 }, + {0x40013 ,0x2604 }, + {0x40033 ,0x1a }, + {0x40053 ,0x0 }, + {0x40073 ,0x0 }, + {0x40014 ,0x708 }, + {0x40034 ,0xa }, + {0x40054 ,0x0 }, + {0x40074 ,0x2002 }, + {0x40015 ,0x4040 }, + {0x40035 ,0x80 }, + {0x40055 ,0x0 }, + {0x40075 ,0x0 }, + {0x40016 ,0x60a }, + {0x40036 ,0x15 }, + {0x40056 ,0x1200 }, + {0x40076 ,0x0 }, + {0x40017 ,0x61a }, + {0x40037 ,0x15 }, + {0x40057 ,0x1300 }, + {0x40077 ,0x0 }, + {0x40018 ,0x60a }, + {0x40038 ,0x1a }, + {0x40058 ,0x1200 }, + {0x40078 ,0x0 }, + {0x40019 ,0x642 }, + {0x40039 ,0x1a }, + {0x40059 ,0x1300 }, + {0x40079 ,0x0 }, + {0x4001a ,0x4808 }, + {0x4003a ,0x880 }, + {0x4005a ,0x0 }, + {0x4007a ,0x0 }, + {0x900a7 ,0x0 }, + {0x900a8 ,0x790 }, + {0x900a9 ,0x11a }, + {0x900aa ,0x8 }, + {0x900ab ,0x7aa }, + {0x900ac ,0x2a }, + {0x900ad ,0x10 }, + {0x900ae ,0x7b2 }, + {0x900af ,0x2a }, + {0x900b0 ,0x0 }, + {0x900b1 ,0x7c8 }, + {0x900b2 ,0x109 }, + {0x900b3 ,0x10 }, + {0x900b4 ,0x2a8 }, + {0x900b5 ,0x129 }, + {0x900b6 ,0x8 }, + {0x900b7 ,0x370 }, + {0x900b8 ,0x129 }, + {0x900b9 ,0xa }, + {0x900ba ,0x3c8 }, + {0x900bb ,0x1a9 }, + {0x900bc ,0xc }, + {0x900bd ,0x408 }, + {0x900be ,0x199 }, + {0x900bf ,0x14 }, + {0x900c0 ,0x790 }, + {0x900c1 ,0x11a }, + {0x900c2 ,0x8 }, + {0x900c3 ,0x4 }, + {0x900c4 ,0x18 }, + {0x900c5 ,0xe }, + {0x900c6 ,0x408 }, + {0x900c7 ,0x199 }, + {0x900c8 ,0x8 }, + {0x900c9 ,0x8568 }, + {0x900ca ,0x108 }, + {0x900cb ,0x18 }, + {0x900cc ,0x790 }, + {0x900cd ,0x16a }, + {0x900ce ,0x8 }, + {0x900cf ,0x1d8 }, + {0x900d0 ,0x169 }, + {0x900d1 ,0x10 }, + {0x900d2 ,0x8558 }, + {0x900d3 ,0x168 }, + {0x900d4 ,0x70 }, + {0x900d5 ,0x788 }, + {0x900d6 ,0x16a }, + {0x900d7 ,0x1ff8 }, + {0x900d8 ,0x85a8 }, + {0x900d9 ,0x1e8 }, + {0x900da ,0x50 }, + {0x900db ,0x798 }, + {0x900dc ,0x16a }, + {0x900dd ,0x60 }, + {0x900de ,0x7a0 }, + {0x900df ,0x16a }, + {0x900e0 ,0x8 }, + {0x900e1 ,0x8310 }, + {0x900e2 ,0x168 }, + {0x900e3 ,0x8 }, + {0x900e4 ,0xa310 }, + {0x900e5 ,0x168 }, + {0x900e6 ,0xa }, + {0x900e7 ,0x408 }, + {0x900e8 ,0x169 }, + {0x900e9 ,0x6e }, + {0x900ea ,0x0 }, + {0x900eb ,0x68 }, + {0x900ec ,0x0 }, + {0x900ed ,0x408 }, + {0x900ee ,0x169 }, + {0x900ef ,0x0 }, + {0x900f0 ,0x8310 }, + {0x900f1 ,0x168 }, + {0x900f2 ,0x0 }, + {0x900f3 ,0xa310 }, + {0x900f4 ,0x168 }, + {0x900f5 ,0x1ff8 }, + {0x900f6 ,0x85a8 }, + {0x900f7 ,0x1e8 }, + {0x900f8 ,0x68 }, + {0x900f9 ,0x798 }, + {0x900fa ,0x16a }, + {0x900fb ,0x78 }, + {0x900fc ,0x7a0 }, + {0x900fd ,0x16a }, + {0x900fe ,0x68 }, + {0x900ff ,0x790 }, + {0x90100 ,0x16a }, + {0x90101 ,0x8 }, + {0x90102 ,0x8b10 }, + {0x90103 ,0x168 }, + {0x90104 ,0x8 }, + {0x90105 ,0xab10 }, + {0x90106 ,0x168 }, + {0x90107 ,0xa }, + {0x90108 ,0x408 }, + {0x90109 ,0x169 }, + {0x9010a ,0x58 }, + {0x9010b ,0x0 }, + {0x9010c ,0x68 }, + {0x9010d ,0x0 }, + {0x9010e ,0x408 }, + {0x9010f ,0x169 }, + {0x90110 ,0x0 }, + {0x90111 ,0x8b10 }, + {0x90112 ,0x168 }, + {0x90113 ,0x0 }, + {0x90114 ,0xab10 }, + {0x90115 ,0x168 }, + {0x90116 ,0x0 }, + {0x90117 ,0x1d8 }, + {0x90118 ,0x169 }, + {0x90119 ,0x80 }, + {0x9011a ,0x790 }, + {0x9011b ,0x16a }, + {0x9011c ,0x18 }, + {0x9011d ,0x7aa }, + {0x9011e ,0x6a }, + {0x9011f ,0xa }, + {0x90120 ,0x0 }, + {0x90121 ,0x1e9 }, + {0x90122 ,0x8 }, + {0x90123 ,0x8080 }, + {0x90124 ,0x108 }, + {0x90125 ,0xf }, + {0x90126 ,0x408 }, + {0x90127 ,0x169 }, + {0x90128 ,0xc }, + {0x90129 ,0x0 }, + {0x9012a ,0x68 }, + {0x9012b ,0x9 }, + {0x9012c ,0x0 }, + {0x9012d ,0x1a9 }, + {0x9012e ,0x0 }, + {0x9012f ,0x408 }, + {0x90130 ,0x169 }, + {0x90131 ,0x0 }, + {0x90132 ,0x8080 }, + {0x90133 ,0x108 }, + {0x90134 ,0x8 }, + {0x90135 ,0x7aa }, + {0x90136 ,0x6a }, + {0x90137 ,0x0 }, + {0x90138 ,0x8568 }, + {0x90139 ,0x108 }, + {0x9013a ,0xb7 }, + {0x9013b ,0x790 }, + {0x9013c ,0x16a }, + {0x9013d ,0x1f }, + {0x9013e ,0x0 }, + {0x9013f ,0x68 }, + {0x90140 ,0x8 }, + {0x90141 ,0x8558 }, + {0x90142 ,0x168 }, + {0x90143 ,0xf }, + {0x90144 ,0x408 }, + {0x90145 ,0x169 }, + {0x90146 ,0xc }, + {0x90147 ,0x0 }, + {0x90148 ,0x68 }, + {0x90149 ,0x0 }, + {0x9014a ,0x408 }, + {0x9014b ,0x169 }, + {0x9014c ,0x0 }, + {0x9014d ,0x8558 }, + {0x9014e ,0x168 }, + {0x9014f ,0x8 }, + {0x90150 ,0x3c8 }, + {0x90151 ,0x1a9 }, + {0x90152 ,0x3 }, + {0x90153 ,0x370 }, + {0x90154 ,0x129 }, + {0x90155 ,0x20 }, + {0x90156 ,0x2aa }, + {0x90157 ,0x9 }, + {0x90158 ,0x0 }, + {0x90159 ,0x400 }, + {0x9015a ,0x10e }, + {0x9015b ,0x8 }, + {0x9015c ,0xe8 }, + {0x9015d ,0x109 }, + {0x9015e ,0x0 }, + {0x9015f ,0x8140 }, + {0x90160 ,0x10c }, + {0x90161 ,0x10 }, + {0x90162 ,0x8138 }, + {0x90163 ,0x10c }, + {0x90164 ,0x8 }, + {0x90165 ,0x7c8 }, + {0x90166 ,0x101 }, + {0x90167 ,0x8 }, + {0x90168 ,0x0 }, + {0x90169 ,0x8 }, + {0x9016a ,0x8 }, + {0x9016b ,0x448 }, + {0x9016c ,0x109 }, + {0x9016d ,0xf }, + {0x9016e ,0x7c0 }, + {0x9016f ,0x109 }, + {0x90170 ,0x0 }, + {0x90171 ,0xe8 }, + {0x90172 ,0x109 }, + {0x90173 ,0x47 }, + {0x90174 ,0x630 }, + {0x90175 ,0x109 }, + {0x90176 ,0x8 }, + {0x90177 ,0x618 }, + {0x90178 ,0x109 }, + {0x90179 ,0x8 }, + {0x9017a ,0xe0 }, + {0x9017b ,0x109 }, + {0x9017c ,0x0 }, + {0x9017d ,0x7c8 }, + {0x9017e ,0x109 }, + {0x9017f ,0x8 }, + {0x90180 ,0x8140 }, + {0x90181 ,0x10c }, + {0x90182 ,0x0 }, + {0x90183 ,0x1 }, + {0x90184 ,0x8 }, + {0x90185 ,0x8 }, + {0x90186 ,0x4 }, + {0x90187 ,0x8 }, + {0x90188 ,0x8 }, + {0x90189 ,0x7c8 }, + {0x9018a ,0x101 }, + {0x90006 ,0x0 }, + {0x90007 ,0x0 }, + {0x90008 ,0x8 }, + {0x90009 ,0x0 }, + {0x9000a ,0x0 }, + {0x9000b ,0x0 }, + {0xd00e7 ,0x400 }, + {0x90017 ,0x0 }, + {0x9001f ,0x2a }, + {0x90026 ,0x6a }, + {0x400d0 ,0x0 }, + {0x400d1 ,0x101 }, + {0x400d2 ,0x105 }, + {0x400d3 ,0x107 }, + {0x400d4 ,0x10f }, + {0x400d5 ,0x202 }, + {0x400d6 ,0x20a }, + {0x400d7 ,0x20b }, + {0x2003a ,0x2 }, + {0x2000b ,0x5d }, + {0x2000c ,0xbb }, + {0x2000d ,0x753 }, + {0x2000e ,0x2c }, + {0x12000b ,0xc }, + {0x12000c ,0x19 }, + {0x12000d ,0xfa }, + {0x12000e ,0x10 }, + {0x22000b ,0x3 }, + {0x22000c ,0x6 }, + {0x22000d ,0x3e }, + {0x22000e ,0x10 }, + {0x9000c ,0x0 }, + {0x9000d ,0x173 }, + {0x9000e ,0x60 }, + {0x9000f ,0x6110 }, + {0x90010 ,0x2152 }, + {0x90011 ,0xdfbd }, + {0x90012 ,0x60 }, + {0x90013 ,0x6152 }, + {0x20010 ,0x5a }, + {0x20011 ,0x3 }, + {0x40080 ,0xe0 }, + {0x40081 ,0x12 }, + {0x40082 ,0xe0 }, + {0x40083 ,0x12 }, + {0x40084 ,0xe0 }, + {0x40085 ,0x12 }, + {0x140080 ,0xe0 }, + {0x140081 ,0x12 }, + {0x140082 ,0xe0 }, + {0x140083 ,0x12 }, + {0x140084 ,0xe0 }, + {0x140085 ,0x12 }, + {0x240080 ,0xe0 }, + {0x240081 ,0x12 }, + {0x240082 ,0xe0 }, + {0x240083 ,0x12 }, + {0x240084 ,0xe0 }, + {0x240085 ,0x12 }, + {0x400fd ,0xf }, + {0x10011 ,0x1 }, + {0x10012 ,0x1 }, + {0x10013 ,0x180 }, + {0x10018 ,0x1 }, + {0x10002 ,0x6209 }, + {0x100b2 ,0x1 }, + {0x101b4 ,0x1 }, + {0x102b4 ,0x1 }, + {0x103b4 ,0x1 }, + {0x104b4 ,0x1 }, + {0x105b4 ,0x1 }, + {0x106b4 ,0x1 }, + {0x107b4 ,0x1 }, + {0x108b4 ,0x1 }, + {0x11011 ,0x1 }, + {0x11012 ,0x1 }, + {0x11013 ,0x180 }, + {0x11018 ,0x1 }, + {0x11002 ,0x6209 }, + {0x110b2 ,0x1 }, + {0x111b4 ,0x1 }, + {0x112b4 ,0x1 }, + {0x113b4 ,0x1 }, + {0x114b4 ,0x1 }, + {0x115b4 ,0x1 }, + {0x116b4 ,0x1 }, + {0x117b4 ,0x1 }, + {0x118b4 ,0x1 }, + {0x12011 ,0x1 }, + {0x12012 ,0x1 }, + {0x12013 ,0x180 }, + {0x12018 ,0x1 }, + {0x12002 ,0x6209 }, + {0x120b2 ,0x1 }, + {0x121b4 ,0x1 }, + {0x122b4 ,0x1 }, + {0x123b4 ,0x1 }, + {0x124b4 ,0x1 }, + {0x125b4 ,0x1 }, + {0x126b4 ,0x1 }, + {0x127b4 ,0x1 }, + {0x128b4 ,0x1 }, + {0x13011 ,0x1 }, + {0x13012 ,0x1 }, + {0x13013 ,0x180 }, + {0x13018 ,0x1 }, + {0x13002 ,0x6209 }, + {0x130b2 ,0x1 }, + {0x131b4 ,0x1 }, + { 0x132b4, 0x1 },board/freescale/imx8mm_evk/lpddr4_timing.c line 1935
Quoted 10 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +10
-0+ { 0x133b4, 0x1 }, + { 0x134b4, 0x1 }, + { 0x135b4, 0x1 }, + { 0x136b4, 0x1 }, + { 0x137b4, 0x1 }, + { 0x138b4, 0x1 }, + { 0x2003a, 0x2 }, + { 0xc0080, 0x2 }, + { 0xd0000, 0x1 }, +};The same as above.
Quoted 43 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +42
-0+ +struct dram_fsp_msg lpddr4_dram_fsp_msg[] = { + { +/* P0 3000mts 1D */ + .drate =3000 , + .fw_type =FW_1D_IMAGE , + .fsp_cfg = lpddr4_fsp0_cfg, + .fsp_cfg_num =ARRAY_SIZE (lpddr4_fsp0_cfg), + }, + { +/* P0 3000mts 2D */ + .drate =3000 , + .fw_type =FW_2D_IMAGE , + .fsp_cfg = lpddr4_fsp0_2d_cfg, + .fsp_cfg_num =ARRAY_SIZE (lpddr4_fsp0_2d_cfg), + }, + { +/* P1 400mts 1D */ + .drate =400 , + .fw_type =FW_1D_IMAGE , + .fsp_cfg = lpddr4_fsp1_cfg, + .fsp_cfg_num =ARRAY_SIZE (lpddr4_fsp1_cfg), + }, + { +/* P1 100mts 1D */ + .drate =100 , + .fw_type =FW_1D_IMAGE , + .fsp_cfg = lpddr4_fsp2_cfg, + .fsp_cfg_num =ARRAY_SIZE (lpddr4_fsp2_cfg), + }, +}; + +/* lpddr4 timing config params on EVK board */ +struct dram_timing_info dram_timing = { + .ddrc_cfg = lpddr4_ddrc_cfg, + .ddrc_cfg_num =ARRAY_SIZE (lpddr4_ddrc_cfg), + .ddrphy_cfg = lpddr4_ddrphy_cfg, + .ddrphy_cfg_num =ARRAY_SIZE (lpddr4_ddrphy_cfg), + .fsp_msg = lpddr4_dram_fsp_msg, + .fsp_msg_num =ARRAY_SIZE (lpddr4_dram_fsp_msg), + .ddrphy_trained_csr = lpddr4_ddrphy_trained_csr, + .ddrphy_trained_csr_num =
ARRAY_SIZE(lpddr4_ddrphy_trained_csr),board/freescale/imx8mm_evk/lpddr4_timing.c line 1979
Quoted 2 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +2
-0+ .ddrphy_pie = lpddr4_phy_pie, + .ddrphy_pie_num = ARRAY_SIZE(lpddr4_phy_pie),It would be best to get the above values calculated dynamically for this SoC.
Quoted 29 lines
board/freescale/imx8mm_evk/lpddr4_timing.c new file +1
-0+};(quoted diff) +0
-0
b/board/freescale/imx8mm_evk/spl.cnew file mode 100644 index 0000000000..cf1dfc2c2aboard/freescale/imx8mm_evk/spl.c new file +22
-0@@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2019 NXP +*/ + +#include <common.h> +#include <spl.h> +#include <asm/io.h> +#include <errno.h> +#include <asm/io.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm/arch/imx8mm_pins.h> +#include <asm/arch/sys_proto.h> +#include <power/pmic.h> +#include <asm/arch/clock.h> +#include <asm/mach-imx/gpio.h> +#include <asm/mach-imx/mxc_i2c.h> +#include <fsl_esdhc.h> +#include <mmc.h> +#include <asm/arch/ddr.h> + +DECLARE_GLOBAL_DATA_PTR ;board/freescale/imx8mm_evk/spl.c line 32
Quoted 10 lines
board/freescale/imx8mm_evk/spl.c new file +10
-0+ +void spl_dram_init (void ) +{ +ddr_init (&dram_timing); +} + +#define USDHC2_CD_GPIO IMX_GPIO_NR(2, 18) +#define USDHC2_PWR_GPIO IMX_GPIO_NR(2, 19) + +#define USDHC_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS |
PAD_CTL_PUE| \Quoted 24 lines
board/freescale/imx8mm_evk/spl.c new file +5
-0+ PAD_CTL_PE | PAD_CTL_FSEL2) +#define USDHC_GPIO_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE1) + +static iomux_v3_cfg_t const usdhc3_pads[] = { + IMX8MM_PAD_NAND_WE_B_USDHC3_CLK |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_WP_B_USDHC3_CMD |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_DATA04_USDHC3_DATA0 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_DATA05_USDHC3_DATA1 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_DATA06_USDHC3_DATA2 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_DATA07_USDHC3_DATA3 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_RE_B_USDHC3_DATA4 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_CE2_B_USDHC3_DATA5 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_CE3_B_USDHC3_DATA6 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_NAND_CLE_USDHC3_DATA7 |
MUX_PAD_CTRL(USDHC_PAD_CTRL), +};board/freescale/imx8mm_evk/spl.c
Quoted 3 lines
board/freescale/imx8mm_evk/spl.c new file +3
-0+ +static iomux_v3_cfg_t const usdhc2_pads[] = { + IMX8MM_PAD_SD2_CLK_USDHC2_CLK |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c
Quoted 1 line
board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_SD2_CMD_USDHC2_CMD |
MUX_PAD_CTRL(USDHC_PAD_CTRL),Quoted 59 lines
board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_SD2_DATA0_USDHC2_DATA0 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_SD2_DATA1_USDHC2_DATA1 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_SD2_DATA2_USDHC2_DATA2 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_SD2_DATA3_USDHC2_DATA3 |
MUX_PAD_CTRL(USDHC_PAD_CTRL),board/freescale/imx8mm_evk/spl.c new file +1
-0+ IMX8MM_PAD_SD2_RESET_B_GPIO2_IO19 |
MUX_PAD_CTRL(USDHC_GPIO_PAD_CTRL), +};board/freescale/imx8mm_evk/spl.c new file +7
-0+ +/* +* The evk board uses DAT3 to detect CD card plugin, +* in u-boot we mux the pin to GPIO when doing board_mmc_getcd. +*/ +static iomux_v3_cfg_t const usdhc2_cd_pad = + IMX8MM_PAD_SD2_DATA3_GPIO2_IO18 |
MUX_PAD_CTRL(USDHC_GPIO_PAD_CTRL); +board/freescale/imx8mm_evk/spl.c new file +14
-0+static iomux_v3_cfg_t const usdhc2_dat3_pad = +IMX8MM_PAD_SD2_DATA3_USDHC2_DATA3 | +MUX_PAD_CTRL (USDHC_PAD_CTRL ); + +static struct fsl_esdhc_cfg usdhc_cfg[2 ] = { + {USDHC2_BASE_ADDR ,0 ,1 }, + {USDHC3_BASE_ADDR ,0 ,1 }, +}; + +int board_mmc_init (bd_t *bis) +{ +int i, ret; +/* +* According to the board_mmc_init() the following map is done:
board/freescale/imx8mm_evk/spl.c new file +8
-0+* (U-Boot device node) (Physical Port) +* mmc0 USDHC1 +* mmc1 USDHC2 +*/ +for (i =0 ; i <CONFIG_SYS_FSL_USDHC_NUM ; i++) { +switch (i) { +case 0 : + usdhc_cfg[0].sdhc_clk =
mxc_get_clock(MXC_ESDHC2_CLK);
+imx_iomux_v3_setup_multiple_pads(usdhc2_pads, + ARRAY_SIZE(usdhc2_pads));board/freescale/imx8mm_evk/spl.c new file +1
-0+ gpio_request(USDHC2_PWR_GPIO,"
usdhc2_reset");board/freescale/imx8mm_evk/spl.c new file +1
-0+ gpio_direction_output(USDHC2_PWR_GPIO,0);
board/freescale/imx8mm_evk/spl.c new file +2
-0+udelay (500 ); + gpio_direction_output(USDHC2_PWR_GPIO,1);
board/freescale/imx8mm_evk/spl.c new file +3
-0+break ; +case 1 : + usdhc_cfg[1].sdhc_clk =
mxc_get_clock(MXC_ESDHC3_CLK);
+imx_iomux_v3_setup_multiple_pads(usdhc3_pads, + ARRAY_SIZE(usdhc3_pads));board/freescale/imx8mm_evk/spl.c
Quoted 1 line
board/freescale/imx8mm_evk/spl.c new file +1
-0+break ;It would be best if you could enable DM/DTS in SPL too from the outset (and share the SPL size).
Do you have any timeline for converting SPL to DM/DTS?
configs/imx8mm_evk_defconfig
Quoted 112 lines
board/freescale/imx8mm_evk/spl.c new file +2
-0+default : + printf("USDHC controllers %d notsupported \n", i + 1);
board/freescale/imx8mm_evk/spl.c new file +14
-0+return -EINVAL ; + } + + ret =fsl_esdhc_initialize (bis, &usdhc_cfg[i]); +if (ret) +return ret; + } + +return 0 ; +} + +int board_mmc_getcd (struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg*)mmc->priv;
board/freescale/imx8mm_evk/spl.c new file +13
-0+int ret =0 ; + +switch (cfg->esdhc_base) { +case USDHC3_BASE_ADDR : + ret =1 ; +break ;Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
to
board/freescale/imx8mm_evk/spl.c new file +20
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
*/
board/freescale/imx8mm_evk/spl.c new file +39
-0Lines of this file are not shown. View the raw message.
(quoted diff) +0
-0The rest of this diff is not shown. View the raw message.
b/configs/imx8mm_evk_defconfig new file mode 100644 index 0000000000..6110f23e38
configs/imx8mm_evk_defconfig new file +13
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m /imximage.cfg,SPL_TEXT_BASE=0x7E1000"
configs/imx8mm_evk_defconfig
Quoted 20 lines
configs/imx8mm_evk_defconfig new file +20
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Here you enable the
DM_ETH, but the welcome u-boot info says:"Net: No ethernet found."
include/configs/imx8mm_evk.h
Quoted 35 lines
configs/imx8mm_evk_defconfig new file +7
-0Lines of this file are not shown. View the raw message.
(quoted diff) +0
-0The rest of this diff is not shown. View the raw message.
b/include/configs/imx8mm_evk.hnew file mode 100644 index 0000000000..f944308757include/configs/imx8mm_evk.h new file +13
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
region */ +#endif
include/configs/imx8mm_evk.h new file +8
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR*Quoted 10 lines
512) +
include/configs/imx8mm_evk.h new file +6
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
CONFIG_SPL_LDSCRIPT"arch/arm/cpu/armv8/u-boot-spl.lds"
+#defineCONFIG_SPL_STACK0x91fff0+#defineCONFIG_SPL_LIBCOMMON_SUPPORT+#define
CONFIG_SPL_LIBGENERIC_SUPPORTQuoted 10 lines
include/configs/imx8mm_evk.h new file +4
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
*/ +#define
CONFIG_SYS_ICACHE_OFFinclude/configs/imx8mm_evk.h new file +3
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
used before
GD_FLG_FULL_MALLOC_INITset */ +
+#defineCONFIG_SPL_ABORT_ON_RAW_IMAGE/* For RAW image gives aerror
include/configs/imx8mm_evk.h
Quoted 4 lines
info not panic */ +
include/configs/imx8mm_evk.h new file +3
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Why do you need to undef those config options?
include/configs/imx8mm_evk.h
Quoted 20 lines
include/configs/imx8mm_evk.h new file +20
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
There seems to be some issue with inheritance, as you need to undef those values manually.
Why is it needed?
include/configs/imx8mm_evk.h
Quoted 130 lines
include/configs/imx8mm_evk.h new file +27
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
earlycon=ec_imx6q,0x30890000,115200\0" \
include/configs/imx8mm_evk.h new file +8
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
"\0" \
include/configs/imx8mm_evk.h new file +3
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
root=${mmcroot}\0 " \
include/configs/imx8mm_evk.h new file +1
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
${loadaddr} ${script};\0" \
include/configs/imx8mm_evk.h new file +3
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
${image}\0" \
include/configs/imx8mm_evk.h new file +1
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
${fdt_file}\0" \
include/configs/imx8mm_evk.h new file +3
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
try; then " \
include/configs/imx8mm_evk.h new file +2
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
${fdt_addr}; " \
include/configs/imx8mm_evk.h new file +2
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
" \
include/configs/imx8mm_evk.h new file +7
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
include/configs/imx8mm_evk.h new file +9
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
try; then " \
include/configs/imx8mm_evk.h new file +1
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
then " \
include/configs/imx8mm_evk.h new file +1
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
${fdt_addr}; " \
include/configs/imx8mm_evk.h new file +2
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
" \
include/configs/imx8mm_evk.h new file +36
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
CONFIG_MMCROOT"/dev/mmcblk1p2" /* USDHC2
*/ + +/* Size ofmalloc()pool */include/configs/imx8mm_evk.h new file +5
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
DDR */ +
include/configs/imx8mm_evk.h new file +2
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
(
CONFIG_SYS_MEMTEST_START+Quoted 32 lines
(
PHYS_SDRAM_SIZE>> 1)) +include/configs/imx8mm_evk.h new file +13
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
sizeof(CONFIG_SYS_PROMPT)+ 16) +include/configs/imx8mm_evk.h new file +17
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Quoted 4 lines
1 */ +#define
CONFIG_SYS_I2C_MXC_I2C2/* enable
I2C bus 2 */ +#defineCONFIG_SYS_I2C_MXC_I2C3/*
enable I2C bus 3 */ +#defineCONFIG_SYS_I2C_SPEED100000Some of those values are (SYS_I2C_*,
MXC_OCOTP, FSL_*) are already supported byKconfig. Please useKconfiginstead.include/configs/imx8mm_evk.h
Quoted 4 lines
include/configs/imx8mm_evk.h new file +4
-0Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang
Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
lukma at denx.de
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190130/ae6fa1e9/attachment-0001.sig>
Part of the diff is not shown here. View the raw message.
Peng Fan
reviewerPATCH 20/20 imx: add i.MX8MM EVK board support
Quoted 63 lines
-----Original Message-----
From: Lukasz Majewski [mailto:lukma at denx.de]
Sent: 2019年1月30日 14:54
To: Peng Fan <[email protected]>
Cc: sbabic at denx.de; Fabio Estevam <[email protected]>; dl-uboot-imx <[email protected]>; u-boot at lists.denx.de
Subject: Re: [U-Boot] [PATCH 20/20] imx: add i.MX8MM EVK board supportHi Peng,
Quoted 33 lines
Quoted 33 lines
-----Original Message-----
From: Lukasz Majewski [mailto:lukma at denx.de]
Sent: 2019年1月30日 7:19
To: Peng Fan <[email protected]>
Cc: sbabic at denx.de; Fabio Estevam <[email protected]>; dl-uboot-imx <[email protected]>; u-boot at lists.denx.de
Subject: Re: [U-Boot] [PATCH 20/20] imx: add i.MX8MM EVK board supportHi Peng,
Quoted 21 lines
Add i.MX8MM EVK board support.
Add board and SoC dts
Add ddr training code
support SD/MMC/GPIO/PINCTRL/UARTU-Boot SPL 2019.01-00148-g1179cffe66 (Jan 28 2019 - 17:37:34 +0800) Normal Boot
Trying to boot from MMC1U-Boot 2019.01-00148-g1179cffe66 (Jan 28 2019 - 17:37:34 +0800)
CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz Reset cause: POR Model: NXP i.MX8MM EVK board DRAM: 2 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 In: serial Out: serial Err: serialDM
Quoted 4 lines
Quoted 2 lines
You set/adjust latter in the code the fec network driver. Why it is not found?
I dropped network support, could add it in V2.
From the patch it seems like the ETH is fully supported, at lease from the source code point of view.
Quoted 10 lines
Quoted 3 lines
Could you also share the output of "dm tree" command?
Sure.
Quoted 3 lines
I suppose/guess that this board shall support as much as possible of the DT/DM conversions?
Quoted 6 lines
Quoted 1 line
Ok.
And I would like to emphasize the need of DDR training code (as a functions, not pair of offset and value).
Are you able to provide such code in the next version of the patch?
There is already common code under drivers/ddr/imx8m
For the array in board file, It need ddr tool change, out of my knowledge.
Thanks,
Peng.
Quoted 3,901 lines
Quoted 3,569 lines
Regards,
Peng.Quoted 3,564 lines
Quoted 1,075 lines
Hit any key to stop autoboot: 2
Signed-off-by Peng Fan <[email protected]>--- arch/arm/dts/fsl-imx8mm-evk.dts | 203 +++ arch/arm/dts/fsl-imx8mm.dtsi | 586 ++++++++ arch/arm/mach-imx/imx8m/Kconfig | 7 + board/freescale/imx8mm_evk/Kconfig | 12 + board/freescale/imx8mm_evk/MAINTAINERS | 6 + board/freescale/imx8mm_evk/Makefile | 12 + board/freescale/imx8mm_evk/imx8mm_evk.c | 144 ++ board/freescale/imx8mm_evk/lpddr4_timing.c | 1980 ++++++++++++++++++++++++++++ board/freescale/imx8mm_evk/spl.c | 187 +++ configs/imx8mm_evk_defconfig | 41 + include/configs/imx8mm_evk.h | 221 ++++ 11 fileschanged, 3399 insertions(+) create mode 100644
arch/arm/dts/fsl-imx8mm-evk.dtscreate mode 100644arch/arm/dts/fsl-imx8mm.dtsicreate mode 100644 board/freescale/imx8mm_evk/Kconfig create mode 100644 board/freescale/imx8mm_evk/MAINTAINERS create mode 100644 board/freescale/imx8mm_evk/Makefile create mode 100644board/freescale/imx8mm_evk/imx8mm_evk.ccreate mode 100644board/freescale/imx8mm_evk/lpddr4_timing.ccreate mode 100644board/freescale/imx8mm_evk/spl.ccreate mode 100644 configs/imx8mm_evk_defconfig create mode 100644include/configs/imx8mm_evk.h(quoted diff) +0
-0
b/arch/arm/dts/fsl-imx8mm-evk.dtsnew file mode 100644 index 0000000000..df409eca47arch/arm/dts/fsl-imx8mm-evk.dts new file +41
-0@@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include "fsl-imx8mm.dtsi" + +/ { + model = "NXP i.MX8MM EVK board"; + compatible = "fsl,imx8mm-evk", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + off-on-delay = <20000>; + enable-active-high; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + + imx8mm-evk { + pinctrl_fec1: fec1grp { + fsl,pins = < +
MX8MM_IOMUXC_ENET_MDC_ENET1_MDC0x3
+MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO0x3
+MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD30x1f
+MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD20x1f
+MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD10x1f
+MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD00x1f
+MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD30x91
+MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD20x91
+MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD10x91
+MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD00x91
+MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC0x1f
+MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC0x91
+MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL0x91
+MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL0x1f
+MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO220x19arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < +
MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO160x19arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < +
MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX0x140
+MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX0x140arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < +
MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO150x1c4
+MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO190x41arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < +
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK0x190
+MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD0x1d0
+MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA00x1d0
+MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA10x1d0
+MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA20x1d0
+MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA30x1d0
+MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT0x1d0arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < +
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK0x194
+MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD0x1d4
+MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA00x1d4
+MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA10x1d4
+MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA20x1d4
+MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA30x1d4
+MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT0x1d0arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < +
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK0x196
+MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD0x1d6
+MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA00x1d6
+MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA10x1d6
+MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA20x1d6
+MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA30x1d6
+MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT0x1d0arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < +
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK0x190
+MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD0x1d0
+MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA00x1d0
+MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA10x1d0
+MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA20x1d0
+MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA30x1d0
+MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA40x1d0
+MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA50x1d0
+MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA60x1d0
+MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA70x1d0
+MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE0x190arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < +
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK0x194
+MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD0x1d4
+MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA00x1d4
+MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA10x1d4
+MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA20x1d4
+MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA30x1d4
+MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA40x1d4
+MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA50x1d4
+MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA60x1d4
+MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA70x1d4
+MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE0x194arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < +
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK0x196
+MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD0x1d6
+MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA00x1d6
+MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA10x1d6
+MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA20x1d6
+MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA30x1d6
+MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA40x1d6
+MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA50x1d6
+MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA60x1d6
+MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA70x1d6
+MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE0x196arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < +
MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B0xc6arch/arm/dts/fsl-imx8mm-evk.dts new file +13
-0+ >; + }; + }; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz","
state_200mhz";arch/arm/dts/fsl-imx8mm-evk.dts new file +2
-0+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>,<
&pinctrl_usdhc2_gpio>;arch/arm/dts/fsl-imx8mm-evk.dts new file +1
-0+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>,<
&pinctrl_usdhc2_gpio>;arch/arm/dts/fsl-imx8mm-evk.dts new file +8
-0+ cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz","
state_200mhz";arch/arm/dts/fsl-imx8mm-evk.dts new file +14
-0+ pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +};(quoted diff) +0
-0
b/arch/arm/dts/fsl-imx8mm.dtsinew file mode 100644 index 0000000000..8a808f856darch/arm/dts/fsl-imx8mm.dtsi new file +143
-0@@ -0,0 +1,586 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2017-2019 NXP + */ + +#include <dt-bindings/clock/imx8mm-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/pins-imx8mm.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "fsl,imx8mm"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + A53_0: cpu at 0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_1: cpu at 1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_2: cpu at 2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_3: cpu at 3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + memory at 40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc_32k: clock at 0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc_32k"; + }; + + osc_24m: clock at 1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc_24m"; + }; + + clk_ext1: clock at 2 { + compatible = "fixed-clock"; + reg = <3>; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext1"; + }; + + clk_ext2: clock at 3 { + compatible = "fixed-clock"; + reg = <4>; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext2"; + }; + + clk_ext3: clock at 4 { + compatible = "fixed-clock"; + reg = <5>; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext3"; + }; + + clk_ext4: clock at 5 { + compatible = "fixed-clock"; + reg = <6>; + #clock-cells = <0>; + clock-frequency= <133000000>; + clock-output-names = "clk_ext4"; + }; + }; + + gic: interrupt-controller at 38800000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */ + <0x0 0x38880000 0 0xC0000>; /* GICR(
RD_base+SGI_base) */arch/arm/dts/fsl-imx8mm.dtsi new file +14
-0+ #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 + (GIC_CPU_MASK_SIMPLE(6) |
IRQ_TYPE_LEVEL_HIGH)>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupt-affinity = <&A53_0>, <&A53_1>,<
&A53_2>, <&A53_3>;arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6)|
IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6)|
IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6)|
IRQ_TYPE_LEVEL_LOW)>, /* Virtual */arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6)|
IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */arch/arm/dts/fsl-imx8mm.dtsi new file +12
-0+ clock-frequency = <8000000>; + arm,no-tick-in-suspend; + }; + + soc at 0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + aips1: bus at 30000000 { + compatible = "fsl,aips-bus","simple-bus";
arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x30000000 0x0 0x400000>; + ranges; + + gpio1: gpio at 30200000 { + compatible = "fsl,imx8mm-gpio","fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30200000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 64
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 65
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio at 30210000 { + compatible = "fsl,imx8mm-gpio","fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30210000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 66
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 67
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio at 30220000 { + compatible = "fsl,imx8mm-gpio","fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30220000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 68
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 69
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio at 30230000 { + compatible = "fsl,imx8mm-gpio","fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30230000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 70
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 71
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio at 30240000 { + compatible = "fsl,imx8mm-gpio","fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30240000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 72
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 73
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +10
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wdog1: wdog at 30280000 { + compatible = "fsl,imx21-wdt"; + reg = <0 0x30280000 0 0x10000>; + interrupts = <GIC_SPI 78
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_WDOG1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ status = "disabled"; + }; + + wdog2: wdog at 30290000 { + compatible = "fsl,imx21-wdt"; + reg = <0 0x30290000 0 0x10000>; + interrupts = <GIC_SPI 79
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_WDOG2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ status = "disabled"; + }; + + wdog3: wdog at 302a0000 { + compatible = "fsl,imx21-wdt"; + reg = <0 0x302a0000 0 0x10000>; + interrupts = <GIC_SPI 10
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_WDOG3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ status = "disabled"; + }; + + sdma2: dma-controller at 302c0000 { + compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x302c0000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 103
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_SDMA2_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_SDMA2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +3
-0+ clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name ="imx/sdma/sdma-imx7d.bin";
arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ fsl,ratio-1-1; + status = "okay"; + }; + + sdma3: dma-controller at 302b0000 { + compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x302b0000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 34
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_SDMA3_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ <&clk IMX8MM_CLK_SDMA3_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name ="imx/sdma/sdma-imx7d.bin";
arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ fsl,ratio-1-1; + status = "okay"; + }; + + iomuxc: pinctrl at 30330000 { + compatible = "fsl,imx8mm-iomuxc"; + reg = <0x0 0x30330000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ }; + + gpr: iomuxc-gpr at 30340000 { + compatible ="fsl,imx8mm-iomuxc-gpr", "syscon";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30340000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ }; + + ocotp: ocotp-ctrl at 30350000 { + compatible = "fsl,imx8mq-ocotp","fsl,imx7d-ocotp", "syscon";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ reg = <0 0x30350000 0 0x10000>; + clocks = <&clk
IMX8MM_CLK_OCOTP_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ /* For nvmem subnodes */ + #address-cells = <1>; + #size-cells = <1>; + }; + + anatop: anatop at 30360000 { + compatible = "fsl,imx8mm-anatop","syscon", "simple-bus";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30360000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ }; + + snvs: snvs at 30370000 { + compatible ="fsl,sec-v4.0-mon","syscon", "simple-mfd";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30370000 0x0
0x10000>; +arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ snvs_rtc: snvs-rtc-lp{ + compatible ="fsl,sec-v4.0-mon-rtc-lp";
arch/arm/dts/fsl-imx8mm.dtsi new file +3
-0+ regmap =<&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI19
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI20
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ }; + + snvs_pwrkey: snvs-powerkey { + compatible ="fsl,sec-v4.0-pwrkey";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ regmap = <&snvs>; + interrupts = <GIC_SPI 4
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ linux,keycode =<
KEY_POWER>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ wakeup-source; + }; + }; + + clk: clock-controller at 30380000 { + compatible = "fsl,imx8mm-ccm"; + reg = <0x0 0x30380000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>,<
&clk_ext1>, <&clk_ext2>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk_ext3>,<
&clk_ext4>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clock-names = "osc_32k","
osc_24m", "clk_ext1", "clk_ext2",arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ "clk_ext3","
clk_ext4";arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ }; + + src: src at 30390000 { + compatible = "fsl,imx8mm-src","syscon";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30390000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 89
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ #reset-cells = <1>; + }; + + gpc: gpc at 303a0000 { + compatible = "fsl,imx8mm-gpc","syscon";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x303a0000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ interrupt-controller; + interrupts = <GIC_SPI 87
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ #interrupt-cells = <3>; + }; + }; + + aips2: bus at 30400000 { + compatible = "fsl,aips-bus","simple-bus";
arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x30400000 0x0 0x400000>; + ranges; + + pwm1: pwm at 30660000 { + compatible = "fsl,imx8mm-pwm","fsl,imx27-pwm";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30660000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 81
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_PWM1_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_PWM1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm at 30670000 { + compatible = "fsl,imx8mm-pwm","fsl,imx27-pwm";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30670000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 82
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_PWM2_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_PWM2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm at 30680000 { + compatible = "fsl,imx8mm-pwm","fsl,imx27-pwm";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30680000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 83
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_PWM3_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_PWM3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm at 30690000 { + compatible = "fsl,imx8mm-pwm","fsl,imx27-pwm";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30690000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 84
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_PWM4_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_PWM4_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + }; + + aips3: bus at 30800000 { + compatible = "fsl,aips-bus","simple-bus";
arch/arm/dts/fsl-imx8mm.dtsi new file +9
-0+ #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x30800000 0x0 0x400000>; + ranges; + + ecspi1: ecspi at 30820000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-ecspi","fsl,imx51-ecspi";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30820000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 31
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_ECSPI1_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_ECSPI1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: ecspi at 30830000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-ecspi","fsl,imx51-ecspi";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30830000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 32
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_ECSPI2_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_ECSPI2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: ecspi at 30840000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-ecspi","fsl,imx51-ecspi";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30840000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 33
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_ECSPI3_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_ECSPI3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial at 30860000 { + compatible = "fsl,imx8mm-uart", + "fsl,imx6q-uart","fsl,imx21-uart";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30860000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 26
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_UART1_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_UART1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial at 30880000 { + compatible = "fsl,imx8mm-uart", + "fsl,imx6q-uart","fsl,imx21-uart";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30880000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 28
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_UART3_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_UART3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial at 30890000 { + compatible = "fsl,imx8mm-uart", + "fsl,imx6q-uart","fsl,imx21-uart";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30890000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 27
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_UART2_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_UART2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c1: i2c at 30a20000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-i2c","fsl,imx21-i2c";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30a20000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 35
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_I2C1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ status = "disabled"; + }; + + i2c2: i2c at 30a30000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-i2c","fsl,imx21-i2c";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30a30000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 36
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_I2C2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ status = "disabled"; + }; + + i2c3: i2c at 30a40000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-i2c","fsl,imx21-i2c";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30a40000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 37
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_I2C3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ status = "disabled"; + }; + + i2c4: i2c at 30a50000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-i2c","fsl,imx21-i2c";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30a50000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 38
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_I2C4_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ status = "disabled"; + }; + + uart4: serial at 30a60000 { + compatible = "fsl,imx8mq-uart", + "fsl,imx6q-uart","fsl,imx21-uart";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30a60000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 29
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_UART4_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_UART4_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + usdhc1: mmc at 30b40000 { + compatible = "fsl,imx8mq-usdhc","fsl,imx7d-usdhc";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30b40000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 22
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk
IMX8MM_CLK_NAND_USDHC_BUS>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_USDHC1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clock-names = "ipg", "ahb","per";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ assigned-clocks = <&clk
IMX8MM_CLK_USDHC1>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ assigned-clock-rates =<400000000>;
arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: mmc at 30b50000 { + compatible = "fsl,imx8mq-usdhc","fsl,imx7d-usdhc";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30b50000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 23
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk
IMX8MM_CLK_NAND_USDHC_BUS>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_USDHC2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clock-names = "ipg", "ahb","per";
arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: mmc at 30b60000 { + compatible = "fsl,imx8mq-usdhc","fsl,imx7d-usdhc";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30b60000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 24
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk
IMX8MM_CLK_NAND_USDHC_BUS>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_USDHC3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clock-names = "ipg", "ahb","per";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ assigned-clocks = <&clk
IMX8MM_CLK_USDHC3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ assigned-clock-rates =<400000000>;
arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + }; + }; +};(quoted diff) +0
-0Quoted 1 line
b/arch/arm/mach-imx/imx8m/Kconfig index
35c978e863..f520075875100644
arch/arm/mach-imx/imx8m/Kconfig config TARGET_IMX8MQ_EVK · line 31
Quoted 11 lines
arch/arm/mach-imx/imx8m/Kconfig +5
-0@@ -24,8 +24,15 @@ config TARGET_IMX8MQ_EVK select IMX8MQ select IMX8M_LPDDR4 +config TARGET_IMX8MM_EVK + bool "imx8mm LPDDR4 EVK board" + select IMX8MM + select SUPPORT_SPL + select IMX8M_LPDDR4Here you shall put the select DM_{UART,USDHC, etc}
Quoted 89 lines
arch/arm/mach-imx/imx8m/Kconfig +2
-0+ endchoice source "board/freescale/imx8mq_evk/Kconfig" +source "board/freescale/imx8mm_evk/Kconfig" endif(quoted diff) +0
-0b/board/freescale/imx8mm_evk/Kconfig new file mode 100644 index 0000000000..299691a619
board/freescale/imx8mm_evk/Kconfig new file +12
-0@@ -0,0 +1,12 @@ +if TARGET_IMX8MM_EVK + +config SYS_BOARD + default "imx8mm_evk" + +config SYS_VENDOR + default "freescale" + +config SYS_CONFIG_NAME + default "imx8mm_evk" + +endif(quoted diff) +0
-0b/board/freescale/imx8mm_evk/MAINTAINERS new file mode 100644 index 0000000000..b031bb0674
board/freescale/imx8mm_evk/MAINTAINERS new file +6
-0@@ -0,0 +1,6 @@ +i.MX8MM EVK BOARD +M: Peng Fan <[email protected]> +S: Maintained +F: board/freescale/imx8mm_evk/ +F: include/configs/imx8mm_evk.h +F: configs/imx8mm_evk_defconfig(quoted diff) +0
-0b/board/freescale/imx8mm_evk/Makefile new file mode 100644 index 0000000000..1db7b62caf
board/freescale/imx8mm_evk/Makefile new file +12
-0@@ -0,0 +1,12 @@ +# +# Copyright 2018 NXP +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += imx8mm_evk.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o +endif(quoted diff) +0
-0
b/board/freescale/imx8mm_evk/imx8mm_evk.cnew file mode 100644 index 0000000000..a681aca04dboard/freescale/imx8mm_evk/imx8mm_evk.c new file +27
-0@@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2018 NXP +*/ + +#include <common.h> +#include <malloc.h> +#include <errno.h> +#include <asm/io.h> +#include <miiphy.h> +#include <netdev.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm-generic/gpio.h> +#include <fsl_esdhc.h> +#include <mmc.h> +#include <asm/arch/imx8mm_pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-imx/gpio.h> +#include <asm/mach-imx/mxc_i2c.h> +#include <asm/arch/clock.h> +#include <spl.h> +#include <asm/mach-imx/dma.h> + +DECLARE_GLOBAL_DATA_PTR ; + +#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) +#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE |
PAD_CTL_PUE|PAD_CTL_PE) +board/freescale/imx8mm_evk/imx8mm_evk.c
Quoted 2 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +2
-0+static iomux_v3_cfg_t const uart_pads[] = { + IMX8MM_PAD_UART2_RXD_UART2_RX |
MUX_PAD_CTRL(UART_PAD_CTRL),board/freescale/imx8mm_evk/imx8mm_evk.c
Quoted 1 line
board/freescale/imx8mm_evk/imx8mm_evk.c new file +1
-0+ IMX8MM_PAD_UART2_TXD_UART2_TX |
MUX_PAD_CTRL(UART_PAD_CTRL),Quoted 30 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +4
-0+}; + +static iomux_v3_cfg_t const wdog_pads[] = { + IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B |
MUX_PAD_CTRL(WDOG_PAD_CTRL), +};board/freescale/imx8mm_evk/imx8mm_evk.c new file +4
-0+ +int board_early_init_f (void ) +{ + struct wdog_regs *wdog = (struct wdog_regs*)WDOG1_BASE_ADDR; +
board/freescale/imx8mm_evk/imx8mm_evk.c new file +1
-0+ imx_iomux_v3_setup_multiple_pads(wdog_pads,
ARRAY_SIZE(wdog_pads)); +board/freescale/imx8mm_evk/imx8mm_evk.c new file +3
-0+set_wdog_reset (wdog); + + imx_iomux_v3_setup_multiple_pads(uart_pads,
ARRAY_SIZE(uart_pads)); +board/freescale/imx8mm_evk/imx8mm_evk.c new file +14
-0+return 0 ; +} + +#ifdef CONFIG_BOARD_POSTCLK_INIT +int board_postclk_init (void ) +{ +/* TODO */ +return 0 ; +} +#endif + +int dram_init (void ) +{ +/* rom_pointer[1] contains the size of TEE occupies */ board/freescale/imx8mm_evk/imx8mm_evk.c line 71
Quoted 10 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +10
-0+if (rom_pointer[1 ]) + gd->ram_size =PHYS_SDRAM_SIZE - rom_pointer[1 ]; +else + gd->ram_size =PHYS_SDRAM_SIZE ; + +return 0 ; +} + +#ifdef CONFIG_OF_BOARD_SETUP +int ft_board_setup (void *blob,bd_t *bd)^^^ - fdt_board_setup ?board/freescale/imx8mm_evk/imx8mm_evk.c
Quoted 9 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +9
-0+{ +return 0 ; +} +#endif + +#ifdef CONFIG_FEC_MXC +#define FEC_RST_PAD IMX_GPIO_NR(4, 22) +static iomux_v3_cfg_t const fec1_rst_pads[] = { + IMX8MM_PAD_SAI2_RXC_GPIO4_IO22 |
MUX_PAD_CTRL(NO_PAD_CTRL),This shall be done with
fsl_fec.cDM driver - there is support for adding reset pin (to dts).board/freescale/imx8mm_evk/imx8mm_evk.c line 92
Quoted 12 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +6
-0+}; + +static void setup_iomux_fec (void ) +{ + imx_iomux_v3_setup_multiple_pads(fec1_rst_pads, +
ARRAY_SIZE(fec1_rst_pads)); +board/freescale/imx8mm_evk/imx8mm_evk.c new file +5
-0+gpio_request (FEC_RST_PAD ,"fec1_rst" ); +gpio_direction_output (FEC_RST_PAD ,0 ); +udelay (500 ); +gpio_direction_output (FEC_RST_PAD ,1 ); +}2,295 lines not shown · raw message
Quoted 8 lines
8 lines not shown · raw message
317 lines not shown · raw message
Part of this message is not shown here. View the raw message.
PATCH 20/20 imx: add i.MX8MM EVK board support
Quoted 65 lines · On Wed, 30 Jan 2019 07:07:10 +0000 Peng Fan <[email protected]> wrote:
Quoted 65 lines
-----Original Message-----
From: Lukasz Majewski [mailto:lukma at denx.de]
Sent: 2019年1月30日 14:54
To: Peng Fan <[email protected]>
Cc: sbabic at denx.de; Fabio Estevam <[email protected]>; dl-uboot-imx <[email protected]>; u-boot at lists.denx.de
Subject: Re: [U-Boot] [PATCH 20/20] imx: add i.MX8MM EVK board supportHi Peng,
Quoted 34 lines
Quoted 34 lines
-----Original Message-----
From: Lukasz Majewski [mailto:lukma at denx.de]
Sent: 2019年1月30日 7:19
To: Peng Fan <[email protected]>
Cc: sbabic at denx.de; Fabio Estevam <[email protected]>; dl-uboot-imx <[email protected]>; u-boot at lists.denx.de
Subject: Re: [U-Boot] [PATCH 20/20] imx: add i.MX8MM EVK board supportHi Peng,
Quoted 22 lines
Add i.MX8MM EVK board support.
Add board and SoC dts
Add ddr training code
support SD/MMC/GPIO/PINCTRL/UARTU-Boot SPL 2019.01-00148-g1179cffe66 (Jan 28 2019 - 17:37:34 +0800) Normal Boot
Trying to boot from MMC1U-Boot 2019.01-00148-g1179cffe66 (Jan 28 2019 - 17:37:34 +0800)
CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz Reset cause: POR Model: NXP i.MX8MM EVK board DRAM: 2 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 In: serial Out: serial Err: serialDM
Quoted 4 lines
Quoted 2 lines
You set/adjust latter in the code the fec network driver. Why it is not found?
I dropped network support, could add it in V2.
From the patch it seems like the ETH is fully supported, at lease from the source code point of view.
Quoted 11 lines
Quoted 3 lines
Could you also share the output of "dm tree" command?
Sure.
Quoted 3 lines
I suppose/guess that this board shall support as much as possible of the DT/DM conversions?
Ok.
Quoted 7 lines
Quoted 5 lines
And I would like to emphasize the need of DDR training code (as a functions, not pair of offset and value).
Are you able to provide such code in the next version of the patch?
There is already common code under
drivers/ddr/imx8m
Yes. Indeed there code is there.
Quoted 2 lines
For the array in board file, It need ddr tool change, out of my knowledge.
If the code is there - why not use it for this board? In that way we would kill two birds with one stone - the code would be tested on "blessed" NXP's development board.
Quoted 3,931 lines
Thanks,
Peng.Quoted 3,927 lines
Quoted 3,594 lines
Regards,
Peng.Quoted 3,589 lines
Quoted 1,094 lines
Hit any key to stop autoboot: 2
Signed-off-by Peng Fan <[email protected]>--- arch/arm/dts/fsl-imx8mm-evk.dts | 203 +++ arch/arm/dts/fsl-imx8mm.dtsi | 586 ++++++++ arch/arm/mach-imx/imx8m/Kconfig | 7 + board/freescale/imx8mm_evk/Kconfig | 12 + board/freescale/imx8mm_evk/MAINTAINERS | 6 + board/freescale/imx8mm_evk/Makefile | 12 + board/freescale/imx8mm_evk/imx8mm_evk.c | 144 ++ board/freescale/imx8mm_evk/lpddr4_timing.c | 1980 ++++++++++++++++++++++++++++ board/freescale/imx8mm_evk/spl.c | 187 +++ configs/imx8mm_evk_defconfig | 41 + include/configs/imx8mm_evk.h | 221 ++++ 11files changed, 3399 insertions(+) create mode 100644
arch/arm/dts/fsl-imx8mm-evk.dtscreate mode 100644arch/arm/dts/fsl-imx8mm.dtsicreate mode 100644 board/freescale/imx8mm_evk/Kconfig create mode 100644 board/freescale/imx8mm_evk/MAINTAINERS create mode 100644 board/freescale/imx8mm_evk/Makefile create mode 100644board/freescale/imx8mm_evk/imx8mm_evk.ccreate mode 100644board/freescale/imx8mm_evk/lpddr4_timing.ccreate mode 100644board/freescale/imx8mm_evk/spl.ccreate mode 100644 configs/imx8mm_evk_defconfig create mode 100644include/configs/imx8mm_evk.h(quoted diff) +0
-0
b/arch/arm/dts/fsl-imx8mm-evk.dtsnew file mode 100644 index 0000000000..df409eca47arch/arm/dts/fsl-imx8mm-evk.dts new file +41
-0@@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include "fsl-imx8mm.dtsi" + +/ { + model = "NXP i.MX8MM EVK board"; + compatible = "fsl,imx8mm-evk", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + off-on-delay = <20000>; + enable-active-high; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + + imx8mm-evk { + pinctrl_fec1: fec1grp { + fsl,pins = < +
MX8MM_IOMUXC_ENET_MDC_ENET1_MDC0x3
+MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO0x3
+MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD30x1f
+MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD20x1f
+MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD10x1f
+MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD00x1f
+MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD30x91
+MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD20x91
+MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD10x91
+MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD00x91
+MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC0x1f
+MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC0x91
+MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL0x91
+MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL0x1f
+MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO220x19arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < +
MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO160x19arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < +
MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX0x140
+MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX0x140arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < +
MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO150x1c4
+MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO190x41arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < +
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK0x190
+MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD0x1d0
+MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA00x1d0
+MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA10x1d0
+MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA20x1d0
+MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA30x1d0
+MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT0x1d0arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < +
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK0x194
+MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD0x1d4
+MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA00x1d4
+MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA10x1d4
+MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA20x1d4
+MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA30x1d4
+MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT0x1d0arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < +
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK0x196
+MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD0x1d6
+MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA00x1d6
+MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA10x1d6
+MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA20x1d6
+MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA30x1d6
+MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT0x1d0arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < +
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK0x190
+MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD0x1d0
+MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA00x1d0
+MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA10x1d0
+MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA20x1d0
+MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA30x1d0
+MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA40x1d0
+MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA50x1d0
+MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA60x1d0
+MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA70x1d0
+MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE0x190arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < +
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK0x194
+MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD0x1d4
+MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA00x1d4
+MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA10x1d4
+MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA20x1d4
+MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA30x1d4
+MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA40x1d4
+MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA50x1d4
+MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA60x1d4
+MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA70x1d4
+MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE0x194arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < +
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK0x196
+MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD0x1d6
+MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA00x1d6
+MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA10x1d6
+MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA20x1d6
+MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA30x1d6
+MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA40x1d6
+MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA50x1d6
+MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA60x1d6
+MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA70x1d6
+MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE0x196arch/arm/dts/fsl-imx8mm-evk.dts new file +6
-0+ >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < +
MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B0xc6arch/arm/dts/fsl-imx8mm-evk.dts new file +13
-0+ >; + }; + }; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz","
state_200mhz";arch/arm/dts/fsl-imx8mm-evk.dts new file +1
-0+ pinctrl-0 = <&pinctrl_usdhc2>,<
&pinctrl_usdhc2_gpio>;arch/arm/dts/fsl-imx8mm-evk.dts new file +1
-0+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>,<
&pinctrl_usdhc2_gpio>;arch/arm/dts/fsl-imx8mm-evk.dts new file +1
-0+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>,<
&pinctrl_usdhc2_gpio>;arch/arm/dts/fsl-imx8mm-evk.dts new file +8
-0+ cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz","
state_200mhz";arch/arm/dts/fsl-imx8mm-evk.dts new file +14
-0+ pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +};(quoted diff) +0
-0
b/arch/arm/dts/fsl-imx8mm.dtsinew file mode 100644 index 0000000000..8a808f856darch/arm/dts/fsl-imx8mm.dtsi new file +142
-0@@ -0,0 +1,586 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2017-2019 NXP + */ + +#include <dt-bindings/clock/imx8mm-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/pins-imx8mm.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "fsl,imx8mm"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + A53_0: cpu at 0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_1: cpu at 1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_2: cpu at 2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_3: cpu at 3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + memory at 40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc_32k: clock at 0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc_32k"; + }; + + osc_24m: clock at 1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc_24m"; + }; + + clk_ext1: clock at 2 { + compatible = "fixed-clock"; + reg = <3>; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext1"; + }; + + clk_ext2: clock at 3 { + compatible = "fixed-clock"; + reg = <4>; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext2"; + }; + + clk_ext3: clock at 4 { + compatible = "fixed-clock"; + reg = <5>; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext3"; + }; + + clk_ext4: clock at 5 { + compatible = "fixed-clock"; + reg = <6>; + #clock-cells = <0>; + clock-frequency= <133000000>; + clock-output-names = "clk_ext4"; + }; + }; + + gic: interrupt-controller at 38800000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x38800000 0 0x10000>, /* GICDist */
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <0x0 0x38880000 0 0xC0000>; /* GICR(
RD_base+SGI_base) */arch/arm/dts/fsl-imx8mm.dtsi new file +14
-0+ #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 + (GIC_CPU_MASK_SIMPLE(6) |
IRQ_TYPE_LEVEL_HIGH)>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupt-affinity = <&A53_0>, <&A53_1>,<
&A53_2>, <&A53_3>;arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13(
GIC_CPU_MASK_SIMPLE(6)|IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_PPI 14(
GIC_CPU_MASK_SIMPLE(6)|IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_PPI 11(
GIC_CPU_MASK_SIMPLE(6)|IRQ_TYPE_LEVEL_LOW)>, /* Virtual */arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_PPI 10(
GIC_CPU_MASK_SIMPLE(6)|IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */arch/arm/dts/fsl-imx8mm.dtsi new file +12
-0+ clock-frequency = <8000000>; + arm,no-tick-in-suspend; + }; + + soc at 0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + aips1: bus at 30000000 { + compatible = "fsl,aips-bus","simple-bus";
arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x30000000 0x0 0x400000>; + ranges; + + gpio1: gpio at 30200000 { + compatible ="fsl,imx8mm-gpio", "fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30200000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 64
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 65
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio at 30210000 { + compatible ="fsl,imx8mm-gpio", "fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30210000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 66
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 67
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio at 30220000 { + compatible ="fsl,imx8mm-gpio", "fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30220000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 68
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 69
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio at 30230000 { + compatible ="fsl,imx8mm-gpio", "fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30230000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 70
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 71
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio at 30240000 { + compatible ="fsl,imx8mm-gpio", "fsl,imx35-gpio";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30240000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 72
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI 73
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +9
-0+ gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wdog1: wdog at 30280000 { + compatible = "fsl,imx21-wdt"; + reg = <0 0x30280000 0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 78
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_WDOG1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ status = "disabled"; + }; + + wdog2: wdog at 30290000 { + compatible = "fsl,imx21-wdt"; + reg = <0 0x30290000 0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 79
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_WDOG2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ status = "disabled"; + }; + + wdog3: wdog at 302a0000 { + compatible = "fsl,imx21-wdt"; + reg = <0 0x302a0000 0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 10
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_WDOG3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ status = "disabled"; + }; + + sdma2: dma-controller at 302c0000 { + compatible ="fsl,imx8mq-sdma", "fsl,imx7d-sdma";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x302c0000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 103
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_SDMA2_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_SDMA2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +3
-0+ clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name ="imx/sdma/sdma-imx7d.bin";
arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ fsl,ratio-1-1; + status = "okay"; + }; + + sdma3: dma-controller at 302b0000 { + compatible ="fsl,imx8mq-sdma", "fsl,imx7d-sdma";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x302b0000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 34
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_SDMA3_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_SDMA3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +3
-0+ clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name ="imx/sdma/sdma-imx7d.bin";
arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ fsl,ratio-1-1; + status = "okay"; + }; + + iomuxc: pinctrl at 30330000 { + compatible ="fsl,imx8mm-iomuxc";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30330000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ }; + + gpr: iomuxc-gpr at 30340000 { + compatible ="fsl,imx8mm-iomuxc-gpr", "syscon";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30340000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ }; + + ocotp: ocotp-ctrl at 30350000 { + compatible ="fsl,imx8mq-ocotp", "fsl,imx7d-ocotp", "syscon";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0 0x30350000 0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_OCOTP_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ /* For nvmem subnodes */ + #address-cells = <1>; + #size-cells = <1>; + }; + + anatop: anatop at 30360000 { + compatible ="fsl,imx8mm-anatop", "syscon", "simple-bus";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30360000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ }; + + snvs: snvs at 30370000 { + compatible ="fsl,sec-v4.0-mon","syscon", "simple-mfd";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30370000 0x0
0x10000>; +arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ snvs_rtc: snvs-rtc-lp{ + compatible ="fsl,sec-v4.0-mon-rtc-lp";
arch/arm/dts/fsl-imx8mm.dtsi new file +3
-0+ regmap =<&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI19
IRQ_TYPE_LEVEL_HIGH>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <GIC_SPI20
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ }; + + snvs_pwrkey: snvs-powerkey { + compatible ="fsl,sec-v4.0-pwrkey";
arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ regmap = <&snvs>; + interrupts =<
GIC_SPI4IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ linux,keycode =<
KEY_POWER>;arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ wakeup-source; + }; + }; + + clk: clock-controller at 30380000 { + compatible ="fsl,imx8mm-ccm";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30380000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ #clock-cells = <1>; + clocks = <&osc_32k>,<
&osc_24m>, <&clk_ext1>, <&clk_ext2>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk_ext3>,<
&clk_ext4>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clock-names = "osc_32k","
osc_24m", "clk_ext1", "clk_ext2",arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ "clk_ext3","
clk_ext4";arch/arm/dts/fsl-imx8mm.dtsi new file +4
-0+ }; + + src: src at 30390000 { + compatible ="fsl,imx8mm-src", "syscon";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30390000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 89
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ #reset-cells = <1>; + }; + + gpc: gpc at 303a0000 { + compatible ="fsl,imx8mm-gpc", "syscon";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x303a0000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +2
-0+ interrupt-controller; + interrupts = <GIC_SPI 87
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ #interrupt-cells = <3>; + }; + }; + + aips2: bus at 30400000 { + compatible = "fsl,aips-bus","simple-bus";
arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x30400000 0x0 0x400000>; + ranges; + + pwm1: pwm at 30660000 { + compatible ="fsl,imx8mm-pwm", "fsl,imx27-pwm";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30660000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 81
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_PWM1_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_PWM1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm at 30670000 { + compatible ="fsl,imx8mm-pwm", "fsl,imx27-pwm";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30670000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 82
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_PWM2_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_PWM2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm at 30680000 { + compatible ="fsl,imx8mm-pwm", "fsl,imx27-pwm";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30680000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 83
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_PWM3_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_PWM3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm at 30690000 { + compatible ="fsl,imx8mm-pwm", "fsl,imx27-pwm";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30690000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 84
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_PWM4_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_PWM4_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + }; + + aips3: bus at 30800000 { + compatible = "fsl,aips-bus","simple-bus";
arch/arm/dts/fsl-imx8mm.dtsi new file +9
-0+ #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x30800000 0x0 0x400000>; + ranges; + + ecspi1: ecspi at 30820000 { + #address-cells = <1>; + #size-cells = <0>; + compatible ="fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30820000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 31
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_ECSPI1_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_ECSPI1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: ecspi at 30830000 { + #address-cells = <1>; + #size-cells = <0>; + compatible ="fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30830000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 32
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_ECSPI2_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_ECSPI2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: ecspi at 30840000 { + #address-cells = <1>; + #size-cells = <0>; + compatible ="fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30840000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 33
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_ECSPI3_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_ECSPI3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial at 30860000 { + compatible ="fsl,imx8mm-uart",
+
"fsl,imx6q-uart", "fsl,imx21-uart";arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30860000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 26
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_UART1_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_UART1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial at 30880000 { + compatible ="fsl,imx8mm-uart",
+
"fsl,imx6q-uart", "fsl,imx21-uart";arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30880000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 28
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_UART3_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_UART3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial at 30890000 { + compatible ="fsl,imx8mm-uart",
+
"fsl,imx6q-uart", "fsl,imx21-uart";arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30890000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 27
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_UART2_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_UART2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c1: i2c at 30a20000 { + #address-cells = <1>; + #size-cells = <0>; + compatible ="fsl,imx8mm-i2c", "fsl,imx21-i2c";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30a20000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 35
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_I2C1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ status = "disabled"; + }; + + i2c2: i2c at 30a30000 { + #address-cells = <1>; + #size-cells = <0>; + compatible ="fsl,imx8mm-i2c", "fsl,imx21-i2c";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30a30000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 36
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_I2C2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ status = "disabled"; + }; + + i2c3: i2c at 30a40000 { + #address-cells = <1>; + #size-cells = <0>; + compatible ="fsl,imx8mm-i2c", "fsl,imx21-i2c";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30a40000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 37
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_I2C3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +7
-0+ status = "disabled"; + }; + + i2c4: i2c at 30a50000 { + #address-cells = <1>; + #size-cells = <0>; + compatible ="fsl,imx8mm-i2c", "fsl,imx21-i2c";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30a50000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 38
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_I2C4_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +5
-0+ status = "disabled"; + }; + + uart4: serial at 30a60000 { + compatible ="fsl,imx8mq-uart",
+
"fsl,imx6q-uart", "fsl,imx21-uart";arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30a60000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 29
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_UART4_ROOT>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_UART4_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +6
-0+ clock-names = "ipg", "per"; + status = "disabled"; + }; + + usdhc1: mmc at 30b40000 { + compatible ="fsl,imx8mq-usdhc", "fsl,imx7d-usdhc";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30b40000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 22
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_DUMMY>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_NAND_USDHC_BUS>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_USDHC1_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clock-names = "ipg", "ahb","per";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ assigned-clocks = <&clk
IMX8MM_CLK_USDHC1>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ assigned-clock-rates =<400000000>;
arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: mmc at 30b50000 { + compatible ="fsl,imx8mq-usdhc", "fsl,imx7d-usdhc";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30b50000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 23
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_DUMMY>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_NAND_USDHC_BUS>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_USDHC2_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clock-names = "ipg", "ahb","per";
arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: mmc at 30b60000 { + compatible ="fsl,imx8mq-usdhc", "fsl,imx7d-usdhc";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ reg = <0x0 0x30b60000 0x0
0x10000>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ interrupts = <GIC_SPI 24
IRQ_TYPE_LEVEL_HIGH>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clocks = <&clk
IMX8MM_CLK_DUMMY>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_NAND_USDHC_BUS>,arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ <&clk
IMX8MM_CLK_USDHC3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ clock-names = "ipg", "ahb","per";
arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ assigned-clocks = <&clk
IMX8MM_CLK_USDHC3_ROOT>;arch/arm/dts/fsl-imx8mm.dtsi new file +1
-0+ assigned-clock-rates =<400000000>;
arch/arm/dts/fsl-imx8mm.dtsi new file +8
-0+ fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + }; + }; +};(quoted diff) +0
-0Quoted 2 lines
b/arch/arm/mach-imx/imx8m/Kconfig index
35c978e863..f520075875100644
arch/arm/mach-imx/imx8m/Kconfig config TARGET_IMX8MQ_EVK · line 31
Quoted 11 lines
arch/arm/mach-imx/imx8m/Kconfig +5
-0@@ -24,8 +24,15 @@ config TARGET_IMX8MQ_EVK select IMX8MQ select IMX8M_LPDDR4 +config TARGET_IMX8MM_EVK + bool "imx8mm LPDDR4 EVK board" + select IMX8MM + select SUPPORT_SPL + select IMX8M_LPDDR4Here you shall put the select DM_{UART,USDHC, etc}
Quoted 89 lines
arch/arm/mach-imx/imx8m/Kconfig +2
-0+ endchoice source "board/freescale/imx8mq_evk/Kconfig" +source "board/freescale/imx8mm_evk/Kconfig" endif(quoted diff) +0
-0b/board/freescale/imx8mm_evk/Kconfig new file mode 100644 index 0000000000..299691a619
board/freescale/imx8mm_evk/Kconfig new file +12
-0@@ -0,0 +1,12 @@ +if TARGET_IMX8MM_EVK + +config SYS_BOARD + default "imx8mm_evk" + +config SYS_VENDOR + default "freescale" + +config SYS_CONFIG_NAME + default "imx8mm_evk" + +endif(quoted diff) +0
-0b/board/freescale/imx8mm_evk/MAINTAINERS new file mode 100644 index 0000000000..b031bb0674
board/freescale/imx8mm_evk/MAINTAINERS new file +6
-0@@ -0,0 +1,6 @@ +i.MX8MM EVK BOARD +M: Peng Fan <[email protected]> +S: Maintained +F: board/freescale/imx8mm_evk/ +F: include/configs/imx8mm_evk.h +F: configs/imx8mm_evk_defconfig(quoted diff) +0
-0b/board/freescale/imx8mm_evk/Makefile new file mode 100644 index 0000000000..1db7b62caf
board/freescale/imx8mm_evk/Makefile new file +12
-0@@ -0,0 +1,12 @@ +# +# Copyright 2018 NXP +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += imx8mm_evk.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o +endif(quoted diff) +0
-0
b/board/freescale/imx8mm_evk/imx8mm_evk.cnew file mode 100644 index 0000000000..a681aca04dboard/freescale/imx8mm_evk/imx8mm_evk.c new file +27
-0@@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2018 NXP +*/ + +#include <common.h> +#include <malloc.h> +#include <errno.h> +#include <asm/io.h> +#include <miiphy.h> +#include <netdev.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm-generic/gpio.h> +#include <fsl_esdhc.h> +#include <mmc.h> +#include <asm/arch/imx8mm_pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-imx/gpio.h> +#include <asm/mach-imx/mxc_i2c.h> +#include <asm/arch/clock.h> +#include <spl.h> +#include <asm/mach-imx/dma.h> + +DECLARE_GLOBAL_DATA_PTR ; + +#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) +#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE |
PAD_CTL_PUE|PAD_CTL_PE) +board/freescale/imx8mm_evk/imx8mm_evk.c
Quoted 2 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +2
-0+static iomux_v3_cfg_t const uart_pads[] = { + IMX8MM_PAD_UART2_RXD_UART2_RX |
MUX_PAD_CTRL(UART_PAD_CTRL),board/freescale/imx8mm_evk/imx8mm_evk.c
Quoted 1 line
board/freescale/imx8mm_evk/imx8mm_evk.c new file +1
-0+ IMX8MM_PAD_UART2_TXD_UART2_TX |
MUX_PAD_CTRL(UART_PAD_CTRL),Quoted 34 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +4
-0+}; + +static iomux_v3_cfg_t const wdog_pads[] = { + IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B |
MUX_PAD_CTRL(WDOG_PAD_CTRL), +};board/freescale/imx8mm_evk/imx8mm_evk.c new file +4
-0+ +int board_early_init_f (void ) +{ + struct wdog_regs *wdog = (struct wdog_regs*)WDOG1_BASE_ADDR; +
board/freescale/imx8mm_evk/imx8mm_evk.c new file +1
-0+ imx_iomux_v3_setup_multiple_pads(wdog_pads,
ARRAY_SIZE(wdog_pads)); +board/freescale/imx8mm_evk/imx8mm_evk.c new file +3
-0+set_wdog_reset (wdog); + + imx_iomux_v3_setup_multiple_pads(uart_pads,
ARRAY_SIZE(uart_pads)); +board/freescale/imx8mm_evk/imx8mm_evk.c new file +14
-0+return 0 ; +} + +#ifdef CONFIG_BOARD_POSTCLK_INIT +int board_postclk_init (void ) +{ +/* TODO */ +return 0 ; +} +#endif + +int dram_init (void ) +{ +/* rom_pointer[1] contains the size of TEE occupies */
board/freescale/imx8mm_evk/imx8mm_evk.c new file +2
-0+if (rom_pointer[1 ]) + gd->ram_size = PHYS_SDRAM_SIZE -rom_pointer[1];
board/freescale/imx8mm_evk/imx8mm_evk.c line 71
Quoted 8 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +8
-0+else + gd->ram_size =PHYS_SDRAM_SIZE ; + +return 0 ; +} + +#ifdef CONFIG_OF_BOARD_SETUP +int ft_board_setup (void *blob,bd_t *bd)^^^ - fdt_board_setup ?board/freescale/imx8mm_evk/imx8mm_evk.c
Quoted 9 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +9
-0+{ +return 0 ; +} +#endif + +#ifdef CONFIG_FEC_MXC +#define FEC_RST_PAD IMX_GPIO_NR(4, 22) +static iomux_v3_cfg_t const fec1_rst_pads[] = { + IMX8MM_PAD_SAI2_RXC_GPIO4_IO22 |
MUX_PAD_CTRL(NO_PAD_CTRL),This shall be done with
fsl_fec.cDM driver - there is support for adding reset pin (to dts).board/freescale/imx8mm_evk/imx8mm_evk.c line 92
Quoted 12 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +6
-0+}; + +static void setup_iomux_fec (void ) +{ + imx_iomux_v3_setup_multiple_pads(fec1_rst_pads, +
ARRAY_SIZE(fec1_rst_pads)); +board/freescale/imx8mm_evk/imx8mm_evk.c new file +5
-0+gpio_request (FEC_RST_PAD ,"fec1_rst" ); +gpio_direction_output (FEC_RST_PAD ,0 ); +udelay (500 ); +gpio_direction_output (FEC_RST_PAD ,1 ); +}This shall be replaced with DM/DTS of the
fsl_fec.cdriver. Please also note that there are (at least on imx6q) some timing issues when we move the code to DM/DTS (some delay is needed).Quoted 21 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +5
-0+ +static int setup_fec (void ) +{ + struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs + = (struct iomuxc_gpr_base_regs*)IOMUXC_GPR_BASE_ADDR; +
board/freescale/imx8mm_evk/imx8mm_evk.c new file +3
-0+setup_iomux_fec (); + +/* Use 125M anatop REF_CLK1 for ENET1, not from external */
board/freescale/imx8mm_evk/imx8mm_evk.c new file +2
-0+ clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], +
IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_SHIFT, 0);board/freescale/imx8mm_evk/imx8mm_evk.c new file +6
-0+return set_clk_enet (ENET_125MHZ ); +} + +int board_phy_config (struct phy_device *phydev) +{ +/* enable rgmii rxc skew and phy mode select to RGMII copper */
board/freescale/imx8mm_evk/imx8mm_evk.c new file +1
-0+phy_write (phydev,MDIO_DEVAD_NONE ,0x1d ,0x1f );board/freescale/imx8mm_evk/imx8mm_evk.c line 120
Quoted 10 lines
board/freescale/imx8mm_evk/imx8mm_evk.c new file +10
-0+phy_write (phydev,MDIO_DEVAD_NONE ,0x1e ,0x8 ); + +phy_write (phydev,MDIO_DEVAD_NONE ,0x1d ,0x00 ); +phy_write (phydev,MDIO_DEVAD_NONE ,0x1e ,0x82ee ); +phy_write (phydev,MDIO_DEVAD_NONE ,0x1d ,0x05 ); +phy_write (phydev,MDIO_DEVAD_NONE ,0x1e ,0x100 ); + +if (phydev->drv->config) + phydev->drv->config (phydev); +return 0 ;2,265 lines not shown · raw message
Quoted 8 lines
8 lines not shown · raw message
318 lines not shown · raw message
13 lines not shown · raw message
Part of this message is not shown here. View the raw message.